summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/exynos
AgeCommit message (Collapse)AuthorFilesLines
2020-07-22drm/exynos: fix ref count leak in mic_pre_enableNavid Emamdoost1-1/+3
[ Upstream commit d4f5a095daf0d25f0b385e1ef26338608433a4c5 ] in mic_pre_enable, pm_runtime_get_sync is called which increments the counter even in case of failure, leading to incorrect ref count. In case of failure, decrement the ref count before returning. Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-04-02drm/exynos: dsi: fix workaround for the legacy clock nameMarek Szyprowski1-3/+4
[ Upstream commit c0fd99d659ba5582e09625c7a985d63fc2ca74b5 ] Writing to the built-in strings arrays doesn't work if driver is loaded as kernel module. This is also considered as a bad pattern. Fix this by adding a call to clk_get() with legacy clock name. This fixes following kernel oops if driver is loaded as module: Unable to handle kernel paging request at virtual address bf047978 pgd = (ptrval) [bf047978] *pgd=59344811, *pte=5903c6df, *ppte=5903c65f Internal error: Oops: 80f [#1] SMP ARM Modules linked in: mc exynosdrm(+) analogix_dp rtc_s3c exynos_ppmu i2c_gpio CPU: 1 PID: 212 Comm: systemd-udevd Not tainted 5.6.0-rc2-next-20200219 #326 videodev: Linux video capture interface: v2.00 Hardware name: Samsung Exynos (Flattened Device Tree) PC is at exynos_dsi_probe+0x1f0/0x384 [exynosdrm] LR is at exynos_dsi_probe+0x1dc/0x384 [exynosdrm] ... Process systemd-udevd (pid: 212, stack limit = 0x(ptrval)) ... [<bf03cf14>] (exynos_dsi_probe [exynosdrm]) from [<c09b1ca0>] (platform_drv_probe+0x6c/0xa4) [<c09b1ca0>] (platform_drv_probe) from [<c09afcb8>] (really_probe+0x210/0x350) [<c09afcb8>] (really_probe) from [<c09aff74>] (driver_probe_device+0x60/0x1a0) [<c09aff74>] (driver_probe_device) from [<c09b0254>] (device_driver_attach+0x58/0x60) [<c09b0254>] (device_driver_attach) from [<c09b02dc>] (__driver_attach+0x80/0xbc) [<c09b02dc>] (__driver_attach) from [<c09ade00>] (bus_for_each_dev+0x68/0xb4) [<c09ade00>] (bus_for_each_dev) from [<c09aefd8>] (bus_add_driver+0x130/0x1e8) [<c09aefd8>] (bus_add_driver) from [<c09b0d64>] (driver_register+0x78/0x110) [<c09b0d64>] (driver_register) from [<bf038558>] (exynos_drm_init+0xe8/0x11c [exynosdrm]) [<bf038558>] (exynos_drm_init [exynosdrm]) from [<c0302fa8>] (do_one_initcall+0x50/0x220) [<c0302fa8>] (do_one_initcall) from [<c03dd02c>] (do_init_module+0x60/0x210) [<c03dd02c>] (do_init_module) from [<c03dbf44>] (load_module+0x1c0c/0x2310) [<c03dbf44>] (load_module) from [<c03dc85c>] (sys_finit_module+0xac/0xbc) [<c03dc85c>] (sys_finit_module) from [<c0301000>] (ret_fast_syscall+0x0/0x54) Exception stack(0xd979bfa8 to 0xd979bff0) ... ---[ end trace db16efe05faab470 ]--- Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-04-02drm/exynos: dsi: propagate error value and silence meaningless warningMarek Szyprowski1-2/+3
[ Upstream commit 0a9d1e3f3f038785ebc72d53f1c409d07f6b4ff5 ] Properly propagate error value from devm_regulator_bulk_get() and don't confuse user with meaningless warning about failure in getting regulators in case of deferred probe. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-11-27Revert "drm/exynos/decon5433: implement frame counter"Inki Dae3-21/+0
[ Upstream commit 6ca469e22a30992b4478d2ab88737c70667c1e00 ] This reverts commit 0586feba322e1de05075700eb4b835c8b683e62b This patch makes it to need get_vblank_counter callback in crtc to get frame counter from decon driver. However, drm_dev->max_vblank_count is a member unique to vendor's DRM driver but in case of ARM DRM, some CRTC devices don't provide the frame counter value. As a result, this patch made extension and clone mode not working. Instead of this patch, we may need separated max_vblank_count which belongs to each CRTC device, or need to implement frame counter emulation for them who don't support HW frame counter. Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-08-24drm/exynos: decon5433: Fix WINCONx reset valueMarek Szyprowski1-1/+1
[ Upstream commit 7b7aa62c05eac9789c208b946f515983a9255d8d ] The only bits that should be preserved in decon_win_set_fmt() is WINCONx_ENWIN_F. All other bits depends on the selected pixel formats and are set by the mentioned function. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-24drm/exynos: decon5433: Fix per-plane global alpha for XRGB modesMarek Szyprowski1-2/+2
[ Upstream commit ab337fc274a1957ff0771f19e826c736253f7c39 ] Set per-plane global alpha to maximum value to get proper blending of XRGB and ARGB planes. This fixes the strange order of overlapping planes. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-24drm/exynos: gsc: Fix support for NV16/61, YUV420/YVU420 and YUV422 modesMarek Szyprowski2-9/+21
[ Upstream commit dd209ef809080ced903e7747ee3ef640c923a1d2 ] Fix following issues related to planar YUV pixel format configuration: - NV16/61 modes were incorrectly programmed as NV12/21, - YVU420 was programmed as YUV420 on source, - YVU420 and YUV422 were programmed as YUV420 on output. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30drm/exynos: fix comparison to bitshift when dealing with a maskWolfram Sang1-1/+1
[ Upstream commit 1293b6191010672c0c9dacae8f71c6f3e4d70cbe ] Due to a typo, the mask was destroyed by a comparison instead of a bit shift. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30drm/exynos: g2d: use monotonic timestampsArnd Bergmann1-3/+3
[ Upstream commit a588a8bb7b25a3fb4f7fed00feb7aec541fc2632 ] The exynos DRM driver uses real-time 'struct timeval' values for exporting its timestamps to user space. This has multiple problems: 1. signed seconds overflow in y2038 2. the 'struct timeval' definition is deprecated in the kernel 3. time may jump or go backwards after a 'settimeofday()' syscall 4. other DRM timestamps are in CLOCK_MONOTONIC domain, so they can't be compared 5. exporting microseconds requires a division by 1000, which may be slow on some architectures. The code existed in two places before, but the IPP portion was removed in 8ded59413ccc ("drm/exynos: ipp: Remove Exynos DRM IPP subsystem"), so we no longer need to worry about it. Ideally timestamps should just use 64-bit nanoseconds instead, but of course we can't change that now. Instead, this tries to address the first four points above by using monotonic 'timespec' values. According to Tobias Jakobi, user space doesn't care about the timestamp at the moment, so we can change the format. Even if there is something looking at them, it will work just fine with monotonic times as long as the application only looks at the relative values between two events. Link: https://patchwork.kernel.org/patch/10038593/ Cc: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-14drm/exynos: gem: Drop NONCONTIG flag for buffers allocated without IOMMUMarek Szyprowski1-0/+9
commit 120a264f9c2782682027d931d83dcbd22e01da80 upstream. When no IOMMU is available, all GEM buffers allocated by Exynos DRM driver are contiguous, because of the underlying dma_alloc_attrs() function provides only such buffers. In such case it makes no sense to keep BO_NONCONTIG flag for the allocated GEM buffers. This allows to avoid failures for buffer contiguity checks in the subsequent operations on GEM objects. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-16drm/exynos: Clear drvdata after component unbindMarek Szyprowski1-0/+1
When components are unbound, DRM driver is unregistered and freed, so clear drvdata to avoid potential use-after-free issue in suspend/resume paths. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2017-10-16drm/exynos: Fix potential NULL pointer dereference in suspend/resume pathsMarek Szyprowski1-2/+5
The patch 6e8edf8a7d8d: "drm/exynos: Fix suspend/resume support" introduced a new code in suspend/resume paths. However it unconditionally dereference drm_dev pointer, which might be NULL if suspend/resume happens before Exynos DRM driver components bind. This patch fixes this issue. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Fixes: 6e8edf8a7d8d "drm/exynos: Fix suspend/resume support" Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2017-09-20drm/exynos/hdmi: Fix unsafe list iterationMaciej Purski1-3/+11
Function hdmi_mode_fixup() used bare list_for_each entry, which was unsafe and caused memory corruption detected by kasan. It now uses drm_for_each_connector_iter macro, which is now recommended by the documentation and safe. Signed-off-by: Maciej Purski <m.purski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2017-09-19drm: exynos: include linux/irq.hArnd Bergmann1-0/+1
I ran into a build error on x86: drivers/gpu/drm/exynos/exynos5433_drm_decon.c: In function 'decon_conf_irq': drivers/gpu/drm/exynos/exynos5433_drm_decon.c:706:2: error: implicit declaration of function 'irq_set_status_flags'; did you mean 'dquot_state_flag'? [-Werror=implicit-function-declaration] irq_set_status_flags(irq, IRQ_NOAUTOEN); Adding the missing include fixes the error. Fixes: b37d53a0382c ("drm/exynos/decon5433: move TE handling to DECON") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2017-09-19drm/exynos: Fix suspend/resume supportMarek Szyprowski4-28/+43
Commit 7d902c05b480 ("drm: Nuke drm_atomic_helper_connector_dpms") removed drm_atomic_helper_connector_dpms() helper saying that it was a dead code. It was however indirectly used by Exynos DRM driver for implementing suspend/resume support. To fix this regression (after that patch Exynos DRM suspend/resume functions became no-ops and hardware fails to suspend), this patch rewrites them with drm_atomic_helper_suspend/resume() helpers. Fixes: 7d902c05b480 ("drm: Nuke drm_atomic_helper_connector_dpms") Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2017-09-19drm/exynos: Fix locking in the suspend/resume pathsMarek Szyprowski1-0/+4
Commit 48a92916729b ("drm/exynos: use drm_for_each_connector_iter()") replaced unsafe drm_for_each_connector() with drm_for_each_connector_iter() and removed surrounding drm_modeset_lock calls. However, that lock was there not only to protect unsafe drm_for_each_connector(), but it was also required to be held by the dpms code which was called from the loop body. This patch restores those drm_modeset_lock calls to fix broken suspend and resume of Exynos DRM subsystem in v4.13 kernel. Fixes: 48a92916729b ("drm/exynos: use drm_for_each_connector_iter()") CC: stable@vger.kernel.org # v4.13 Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2017-08-25drm/exynos: simplify set_pixfmt() in DECON and FIMD driversTobias Jakobi3-16/+3
DRM core already checks the validity of the pixelformat. Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2017-08-25drm/exynos: consistent use of cppTobias Jakobi3-13/+13
A recent commit (272725c7db4da1fd3229d944fc76d2e98e3a144e) has removed the use of 'bits_per_pixel' in DRM. However the corresponding Exynos driver code still uses the ambiguous 'bpp', even though it is now initialized from fb->cpp[0]. Consistenly use 'cpp' in FIMD, DECON7 and DECON5433 drivers. Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
2017-08-25drm/exynos: mixer: remove src offset from mixer_graph_buffer()Tobias Jakobi1-9/+6
We always translate the dma address such that the offsets of the source image are zero. Hence we can remove manipulation of the MXR_GRAPHIC_SXY(win) register and just zero them once in mixer_win_reset(). Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2017-08-25drm/exynos: mixer: simplify mixer_graph_buffer()Tobias Jakobi1-4/+1
DRM core already checks in drm_atomic_plane_check() if the pixelformat is valid. Hence we can collapse the default case of the switch statement with the XRGB8888 case. No functional change. Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2017-08-25drm/exynos: mixer: simplify vp_video_buffer()Tobias Jakobi1-20/+6
DRM core already checks in drm_atomic_plane_check() if the pixelformat is valid. Hence we can drop the default case of the switch statement and collapse most of the code. Also rename the two booleans to reflect what true/false actually means, and to avoid mixing CrCb/NV21 descriptions. No functional change. Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2017-08-25drm/exynos: mixer: enable NV12MT support for the video planeTobias Jakobi4-1/+35
The video processor supports a tiled version of the NV12 format, known as NV12MT in V4L2 terms. The support was removed in commit 083500baefd5f4c215a5a93aef2492c1aa775828 due to not being a real pixel format, but rather NV12 with a special memory layout. With the introduction of FB modifiers, we can now properly support this format again. Tested with a hacked up modetest from libdrm's test suite on an ODROID-X2 (Exynos4412). Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2017-08-25drm/exynos: mixer: fix chroma comment in vp_video_buffer()Tobias Jakobi1-1/+1
The current comment sounds like the division op is done to compensate for some hardware erratum. But the chroma plane having half the height of the luma plane is just the way NV12/NV21 is defined, so clarify this behaviour. Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2017-08-25drm/exynos/decon5433: use mode info stored in CRTC to detect i80 modeAndrzej Hajda1-15/+25
Since panel's mode of work is propagated properly from panel to DECON, there is no need to use redundant private device tree property. The only issue with such approach is that check for required interrupts should be postponed until panel communicate its requirements, ie to mode validation phase - mode_valid callback. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
2017-08-25drm/exynos: add mode_valid callback to exynos_drmAndrzej Hajda2-0/+15
crtc::mode_valid callback is required to implement proper pipeline validation for command/video modes. Since Exynos uses private framework such callback should be added to it. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2017-08-25drm/exynos/decon5433: refactor irq requesting codeAndrzej Hajda1-24/+30
To allow runtime validation of mode of work irq request code should be split into two separate phases: - irq reqesting, - irq checking. Following patches will move 2nd phase to mode validation phase. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2017-08-25drm/exynos/mic: use mode info stored in CRTC to detect i80 modeAndrzej Hajda1-40/+4
MIC driver should use info from CRTC to check mode of work instead of illegally peeking into nodes of other devices. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2017-08-25drm/exynos/dsi: propagate info about command mode from panelAndrzej Hajda2-0/+3
mipi_dsi framework provides information about panel's mode of work. This info should be propagated upstream to configure all elements of the pipeline. As CRTC is the common denominator of the pipeline we can put such info into its structures. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2017-08-25drm/exynos/dsi: refactor panel detection logicAndrzej Hajda1-101/+102
Description of drm_helper_hpd_irq_event clearly states that drivers supporting hotplug events per connector should use different helper - drm_kms_helper_hotplug_event. To achieve it following changes have been performed: - moved down all DSI ops - they require exynos_dsi_disable function to be defined earlier, - simplified exynos_dsi_detect - there is no real detection, it just returns if panel is attached, - DSI attach/detach callbacks attaches/detaches DRM panel and sets connector status and other context fields accordingly, all this is performed under mutex, as these callbacks are asynchronous. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2017-08-25drm/exynos: use helper to set possible crtcsAndrzej Hajda8-59/+53
All encoders share the same code to set encoders possible_crtcs field. The patch creates helper to abstract out this code. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2017-08-25drm/exynos/decon5433: use readl_poll_timeout helpersAndrzej Hajda1-12/+8
Linux core provide helpers for polling with timeout, lets use them. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2017-08-17Merge tag 'drm-misc-next-2017-08-16' of ↵Dave Airlie3-35/+2
git://anongit.freedesktop.org/git/drm-misc into drm-next UAPI Changes: - vc4: Allow userspace to dictate rendering order in submit_cl ioctl (Eric) Cross-subsystem Changes: - vboxvideo: One of Cihangir's patches applies to vboxvideo which is maintained in staging Core Changes: - atomic_legacy_backoff is officially killed (Daniel) - Extract drm_device.h (Daniel) - Unregister drm device on unplug (Daniel) - Rename deprecated drm_*_(un)?reference functions to drm_*_{get|put} (Cihangir) Driver Changes: - vc4: Error/destroy path cleanups, log level demotion, edid leak (Eric) - various: Make various drm_*_funcs structs const (Bhumika) - tinydrm: add support for LEGO MINDSTORMS EV3 LCD (David) - various: Second half of .dumb_{map_offset|destroy} defaults set (Noralf) Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Eric Anholt <eric@anholt.net> Cc: Bhumika Goyal <bhumirks@gmail.com> Cc: Cihangir Akturk <cakturk@gmail.com> Cc: David Lechner <david@lechnology.com> Cc: Noralf Trønnes <noralf@tronnes.org> * tag 'drm-misc-next-2017-08-16' of git://anongit.freedesktop.org/git/drm-misc: (50 commits) drm/gem-cma-helper: Remove drm_gem_cma_dumb_map_offset() drm/virtio: Use the drm_driver.dumb_destroy default drm/bochs: Use the drm_driver.dumb_destroy default drm/mgag200: Use the drm_driver.dumb_destroy default drm/exynos: Use .dumb_map_offset and .dumb_destroy defaults drm/msm: Use the drm_driver.dumb_destroy default drm/ast: Use the drm_driver.dumb_destroy default drm/qxl: Use the drm_driver.dumb_destroy default drm/udl: Use the drm_driver.dumb_destroy default drm/cirrus: Use the drm_driver.dumb_destroy default drm/tegra: Use .dumb_map_offset and .dumb_destroy defaults drm/gma500: Use .dumb_map_offset and .dumb_destroy defaults drm/mxsfb: Use .dumb_map_offset and .dumb_destroy defaults drm/meson: Use .dumb_map_offset and .dumb_destroy defaults drm/kirin: Use .dumb_map_offset and .dumb_destroy defaults drm/vc4: Continue the switch to drm_*_put() helpers drm/vc4: Fix leak of HDMI EDID dma-buf: fix reservation_object_wait_timeout_rcu to wait correctly v2 dma-buf: add reservation_object_copy_fences (v2) drm/tinydrm: add support for LEGO MINDSTORMS EV3 LCD ...
2017-08-16drm/exynos: Use .dumb_map_offset and .dumb_destroy defaultsNoralf Trønnes3-35/+2
This driver can use the drm_driver.dumb_destroy and drm_driver.dumb_map_offset defaults, so no need to set them. Use drm_gem_dumb_map_offset() in exynos_drm_gem_map_ioctl() and remove exynos_drm_gem_dumb_map_offset(). Cc: Joonyoung Shim <jy0922.shim@samsung.com> Cc: Seung-Woo Kim <sw0312.kim@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/1502034068-51384-14-git-send-email-noralf@tronnes.org
2017-08-15Backmerge tag 'v4.13-rc5' into drm-nextDave Airlie7-28/+42
Linux 4.13-rc5 There's a really nasty nouveau collision, hopefully someone can take a look once I pushed this out.
2017-08-09drm/exynos: forbid creating framebuffers from too small GEM buffersMarek Szyprowski1-1/+13
Add a check if the framebuffer described by the provided drm_mode_fb_cmd2 structure fits into provided GEM buffers. Without this check it is possible to create a framebuffer object from a small buffer and set it to the hardware, what results in displaying system memory outside the allocated GEM buffer. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2017-08-08drm: Nuke drm_atomic_helper_connector_dpmsDaniel Vetter4-4/+0
It's dead code, the core handles all this directly now. The only special case is nouveau and tda988x which used one function for both legacy modeset code and -nv50 atomic world instead of 2 vtables. But amounts to exactly the same. v2: Rebase over the panel/brideg refactorings in stm/ltdc. Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Archit Taneja <architt@codeaurora.org> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Peter Senna Tschudin <peter.senna@collabora.com> Cc: Martin Donnelly <martin.donnelly@ge.com> Cc: Martyn Welch <martyn.welch@collabora.co.uk> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: David Airlie <airlied@linux.ie> Cc: Inki Dae <inki.dae@samsung.com> Cc: Joonyoung Shim <jy0922.shim@samsung.com> Cc: Seung-Woo Kim <sw0312.kim@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Kukjin Kim <kgene@kernel.org> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Stefan Agner <stefan@agner.ch> Cc: Alison Wang <alison.wang@freescale.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: CK Hu <ck.hu@mediatek.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Carlo Caione <carlo@caione.org> Cc: Kevin Hilman <khilman@baylibre.com> Cc: Marek Vasut <marex@denx.de> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Eric Anholt <eric@anholt.net> Cc: Mark Yao <mark.yao@rock-chips.com> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org> Cc: Vincent Abriou <vincent.abriou@st.com> Cc: Yannick Fertre <yannick.fertre@st.com> Cc: Philippe Cornu <philippe.cornu@st.com> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Chen-Yu Tsai <wens@csie.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com> Cc: Jyri Sarha <jsarha@ti.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: John Stultz <john.stultz@linaro.org> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Cc: Jeffy Chen <jeffy.chen@rock-chips.com> Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com> Cc: Yakir Yang <kuankuan.y@gmail.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Jose Abreu <Jose.Abreu@synopsys.com> Cc: Romain Perier <romain.perier@collabora.com> Cc: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Cc: Xinliang Liu <z.liuxinliang@hisilicon.com> Cc: Alexey Brodkin <abrodkin@synopsys.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Rongrong Zou <zourongrong@gmail.com> Cc: Rob Clark <robdclark@gmail.com> Cc: Hai Li <hali@codeaurora.org> Cc: "Noralf Trønnes" <noralf@tronnes.org> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Cc: intel-gfx@lists.freedesktop.org Cc: linux-mediatek@lists.infradead.org Cc: linux-amlogic@lists.infradead.org Cc: nouveau@lists.freedesktop.org Cc: linux-renesas-soc@vger.kernel.org Cc: linux-rockchip@lists.infradead.org Cc: linux-tegra@vger.kernel.org Cc: virtualization@lists.linux-foundation.org Cc: zain wang <wzz@rock-chips.com> Cc: Baoyou Xie <baoyou.xie@linaro.org> Cc: Boris Brezillon <boris.brezillon@free-electrons.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170725080122.20548-8-daniel.vetter@ffwll.ch Acked-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Archit Taneja <architt@codeaurora.org> Tested-by: Philippe Cornu <philippe.cornu@st.com> (on stm) Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Acked-by: Shawn Guo <shawnguo@kernel.org> Acked-by: Noralf Trønnes <noralf@tronnes.org> Acked-by: Vincent Abriou <vincent.abriou@st.com>
2017-08-08drm: Nuke drm_atomic_helper_plane_set_propertyDaniel Vetter1-1/+0
It's dead code, the core handles all this directly now. This also allows us to unexport drm_atomic_plane_set_property. Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Brian Starkey <brian.starkey@arm.com> Cc: Mali DP Maintainers <malidp@foss.arm.com> Cc: Boris Brezillon <boris.brezillon@free-electrons.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: David Airlie <airlied@linux.ie> Cc: Inki Dae <inki.dae@samsung.com> Cc: Joonyoung Shim <jy0922.shim@samsung.com> Cc: Seung-Woo Kim <sw0312.kim@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Kukjin Kim <kgene@kernel.org> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org> Cc: Vincent Abriou <vincent.abriou@st.com> Cc: Yannick Fertre <yannick.fertre@st.com> Cc: Philippe Cornu <philippe.cornu@st.com> Cc: Jyri Sarha <jsarha@ti.com> Cc: "Ville Syrjälä" <ville.syrjala@linux.intel.com> Cc: Rongrong Zou <zourongrong@gmail.com> Cc: Shawn Guo <shawn.guo@linaro.org> Cc: Alexey Brodkin <abrodkin@synopsys.com> Cc: Eric Engestrom <eric@engestrom.ch> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Rob Clark <robdclark@gmail.com> Cc: Archit Taneja <architt@codeaurora.org> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Cc: intel-gfx@lists.freedesktop.org Cc: nouveau@lists.freedesktop.org Cc: linux-renesas-soc@vger.kernel.org Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170725080122.20548-6-daniel.vetter@ffwll.ch Reviewed-by: Archit Taneja <architt@codeaurora.org> Acked-by: Philippe Cornu <philippe.cornu@st.com> Tested-by: Philippe Cornu <philippe.cornu@st.com> Acked-by: Liviu Dudau <Liviu.Dudau@arm.com> Acked-by: Vincent Abriou <vincent.abriou@st.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2017-08-01drm: Plumb modifiers through plane initBen Widawsky1-1/+1
This is the plumbing for supporting fb modifiers on planes. Modifiers have already been introduced to some extent, but this series will extend this to allow querying modifiers per plane. Based on this, the client to enable optimal modifications for framebuffers. This patch simply allows the DRM drivers to initialize their list of supported modifiers upon initializing the plane. v2: A minor addition from Daniel v3: * Updated commit message * s/INVALID/DRM_FORMAT_MOD_INVALID (Liviu) * Remove some excess newlines (Liviu) * Update comment for > 64 modifiers (Liviu) v4: Minor comment adjustments (Liviu) v5: Some new platforms added due to rebase v6: Add some missed plane inits (or maybe they're new - who knows at this point) (Daniel) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Reviewed-by: Daniel Stone <daniels@collabora.com> (v2) Reviewed-by: Liviu Dudau <Liviu.Dudau@arm.com> Signed-off-by: Daniel Stone <daniels@collabora.com>
2017-07-27drm: exynos: mark pm functions as __maybe_unusedArnd Bergmann1-4/+2
The rework of the exynos DRM clock handling introduced warnings for configurations that have CONFIG_PM disabled: drivers/gpu/drm/exynos/exynos_hdmi.c:736:13: error: 'hdmi_clk_disable_gates' defined but not used [-Werror=unused-function] static void hdmi_clk_disable_gates(struct hdmi_context *hdata) ^~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/exynos/exynos_hdmi.c:717:12: error: 'hdmi_clk_enable_gates' defined but not used [-Werror=unused-function] static int hdmi_clk_enable_gates(struct hdmi_context *hdata) The problem is that the PM functions themselves are inside of an #ifdef, but some functions they call are not. This patch removes the #ifdef and instead marks the PM functions as __maybe_unused, which is a more reliable way to get it right. Link: https://patchwork.kernel.org/patch/8436281/ Fixes: 9be7e9898444 ("drm/exynos/hdmi: clock code re-factoring") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2017-07-27drm/exynos: select CEC_CORE if CEC_NOTIFIERHans Verkuil1-0/+1
If the s5p-cec driver is a module and the drm exynos driver is built-in, then the CEC core will be a module also, causing the CEC notifier to fail (will be compiled as empty functions). To prevent this select CEC_CORE if CEC_NOTIFIER is set to ensure the CEC core is also built into the kernel. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2017-07-27drm/exynos/hdmi: fix disable sequenceAndrzej Hajda1-2/+0
The "Fixes" patch was incorrectly merged, as a result PHY is prematurely powered off and for example Odroid-U3 cannot disable TV power domain when HDMI cable is unplugged. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Fixes: 625e63e2 ("drm/exynos/hdmi: fix pipeline disable order") Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2017-07-27drm/exynos: mic: add a bridge at probeInki Dae1-9/+15
This patch moves drm_bridge_add call into probe. It doesn't need to call drm_bridge_add call every time bind callback is called. Changelog v2 - moved drm_bridge_remove call into remove callback. - corrected description. Suggested-by: Andrzej Hajda <a.hajda@samsung.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Reviewed-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2017-07-27drm/exynos/dsi: Remove error handling for bridge_node DT parsingHoegeun Kwon1-2/+0
Remove the error handling of bridge_node because the bridge_node is optional. For example, In case of Exynos SoC, a bridge device such as mDNIe and MIC could be placed between Display Controller and MIPI DSI device but the bridge device is optional. Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2017-07-27drm/exynos: dsi: do not try to find bridgeInki Dae1-3/+5
It doesn't need to try to find a bridge if bridge node doesn't exist. Reviewed-by: Shuah Khan <shuahkh@osg.samsung.com> Tested-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2017-07-27drm: exynos: hdmi: make of_device_ids const.Arvind Yadav1-1/+1
of_device_ids are not supposed to change at runtime. All functions working with of_device_ids provided by <linux/of.h> work with const of_device_ids. So mark the non-const structs as const. File size before: text data bss dec hex filename 12294 1192 0 13486 34ae drivers/gpu/drm/exynos/exynos_hdmi.o File size after constify hdmi_match_types. text data bss dec hex filename 13318 176 0 13494 34b6 drivers/gpu/drm/exynos/exynos_hdmi.o Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2017-07-27drm: exynos: constify mixer_match_types and *_mxr_drv_data.Arvind Yadav1-5/+5
File size before: text data bss dec hex filename 9983 1424 0 11407 2c8f drivers/gpu/drm/exynos/exynos_mixer.o File size after constify: text data bss dec hex filename 11231 176 0 11407 2c8f drivers/gpu/drm/exynos/exynos_mixer.o Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2017-07-27exynos_drm: Clean up duplicated assignment in exynos_drm_driverGabriel Krisman Bertazi1-1/+0
num_ioctls is already assigned when declaring the exynos_drm_driver structure. No need to duplicate it here. Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2017-07-26drm/atomic: implement drm_atomic_helper_commit_tail for runtime_pm usersMaxime Ripard1-26/+1
The current drm_atomic_helper_commit_tail helper works only if the CRTC is accessible, and documents an alternative implementation that is supposed to be used if that happens. That implementation is then duplicated by some drivers. Instead of documenting it, let's implement an helper that all the relevant users can use directly. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/a8f92dc70048bab746e94dadd1c23200626aff60.1500555652.git-series.maxime.ripard@free-electrons.com Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2017-07-26drm/exynos: Remove custom FB helper deferred setupThierry Reding2-27/+5
The FB helper core now supports deferred setup, so the driver's custom implementation can be removed. v2: Drop NULL check, drm_fb_helper_hotplug_event handles that already. Cc: Inki Dae <inki.dae@samsung.com> Cc: Joonyoung Shim <jy0922.shim@samsung.com> Cc: Seung-Woo Kim <sw0312.kim@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Thierry Reding <treding@nvidia.com> (v1) Reviewed-by: Inki Dae <inki.dae@samsung.com> Tested-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20170706130023.28417-4-daniel.vetter@ffwll.ch Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-26 15:55:47 +0300