summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/exynos/exynos_mixer.c
AgeCommit message (Collapse)AuthorFilesLines
2017-08-25drm/exynos: mixer: remove src offset from mixer_graph_buffer()Tobias Jakobi1-9/+6
We always translate the dma address such that the offsets of the source image are zero. Hence we can remove manipulation of the MXR_GRAPHIC_SXY(win) register and just zero them once in mixer_win_reset(). Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2017-08-25drm/exynos: mixer: simplify mixer_graph_buffer()Tobias Jakobi1-4/+1
DRM core already checks in drm_atomic_plane_check() if the pixelformat is valid. Hence we can collapse the default case of the switch statement with the XRGB8888 case. No functional change. Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2017-08-25drm/exynos: mixer: simplify vp_video_buffer()Tobias Jakobi1-20/+6
DRM core already checks in drm_atomic_plane_check() if the pixelformat is valid. Hence we can drop the default case of the switch statement and collapse most of the code. Also rename the two booleans to reflect what true/false actually means, and to avoid mixing CrCb/NV21 descriptions. No functional change. Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2017-08-25drm/exynos: mixer: enable NV12MT support for the video planeTobias Jakobi1-1/+5
The video processor supports a tiled version of the NV12 format, known as NV12MT in V4L2 terms. The support was removed in commit 083500baefd5f4c215a5a93aef2492c1aa775828 due to not being a real pixel format, but rather NV12 with a special memory layout. With the introduction of FB modifiers, we can now properly support this format again. Tested with a hacked up modetest from libdrm's test suite on an ODROID-X2 (Exynos4412). Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2017-08-25drm/exynos: mixer: fix chroma comment in vp_video_buffer()Tobias Jakobi1-1/+1
The current comment sounds like the division op is done to compensate for some hardware erratum. But the chroma plane having half the height of the luma plane is just the way NV12/NV21 is defined, so clarify this behaviour. Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2017-07-27drm: exynos: constify mixer_match_types and *_mxr_drv_data.Arvind Yadav1-5/+5
File size before: text data bss dec hex filename 9983 1424 0 11407 2c8f drivers/gpu/drm/exynos/exynos_mixer.o File size after constify: text data bss dec hex filename 11231 176 0 11407 2c8f drivers/gpu/drm/exynos/exynos_mixer.o Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2017-06-01drm/exynos: mixer: document YCbCr magic numbersTobias Jakobi1-8/+25
The output stage of the mixer uses YCbCr for the internal computations, which is the reason that some registers take YCbCr related data as input. In particular this applies to MXR_BG_COLOR{0,1,2} and MXR_CM_COEFF_{Y,CB,CR}. Document the formatting of the data which we write to these registers. While at it, unify wording of comments in the register header. Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2017-06-01drm/exynos: mixer: simplify mixer_cfg_rgb_fmt()Tobias Jakobi1-22/+8
Convert if-statements to switch statement. Removes duplicated code. Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2017-06-01drm/exynos: kill pipe field from drivers contextsAndrzej Hajda1-2/+0
Since possible_crtcs are set by Exynos core helper pipe fields have no raison d'etre. The only place it was used, as a hack, is fimd_clear_channels, to avoid calling drm_crtc_handle_vblank, but DRM core has already other protection mechanism (vblank->enabled), so it could be safely removed. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2017-06-01drm/exynos: set plane possible_crtcs in exynos_plane_initAndrzej Hajda1-1/+1
All Exynos planes are assigned to exactly one CRTC, it allows to simplify initialization by moving setting of possible_crtcs to exynos_plane_init. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2017-06-01drm/exynos: kill exynos_drm_private::pipeAndrzej Hajda1-6/+2
The field duplicates drm_dev->mode_config.num_crtc. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2017-06-01drm/exynos: kill exynos_drm_crtc::pipeAndrzej Hajda1-2/+1
Since crtc index is stored in drm_crtc pipe field became redundant. The patch beside removing the field simplifies also exynos_drm_crtc_get_pipe_from_type. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2017-03-21drm/exynos: move crtc event handling to drivers callbacksAndrzej Hajda1-0/+1
CRTC event is currently send with next vblank, or instantly in case crtc is being disabled. This approach usually works, but in corner cases it can result in premature event generation. Only device driver is able to verify if the event can be sent. This patch is a first step in that direction - it moves event handling to the drivers. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2017-01-31drm/exynos: fix a timeout loopDan Carpenter1-1/+1
We were trying to print an error message if we timed out here, but the loop actually ends with "tries" set to UINT_MAX and not zero. Fix this by changing from tries-- to --tries. A for loop would actually be the most natural way to do this. My fix means we only loop 99 times instead of 100 but that's probably ok. Fixes: a696394c5224 ('drm/exynos: mixer: simplify loop in vp_win_reset()') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-12-15drm: Nuke fb->pixel_formatVille Syrjälä1-4/+4
Replace uses of fb->pixel_format with fb->format->format. Less duplicated information is a good thing. Note that coccinelle failed to eliminate the "/* fourcc format */" comment from drm_framebuffer.h, so I had to do that part manually. @@ struct drm_framebuffer *FB; expression E; @@ drm_helper_mode_fill_fb_struct(...) { ... - FB->pixel_format = E; ... } @@ struct drm_framebuffer *FB; expression E; @@ i9xx_get_initial_plane_config(...) { ... - FB->pixel_format = E; ... } @@ struct drm_framebuffer *FB; expression E; @@ ironlake_get_initial_plane_config(...) { ... - FB->pixel_format = E; ... } @@ struct drm_framebuffer *FB; expression E; @@ skylake_get_initial_plane_config(...) { ... - FB->pixel_format = E; ... } @@ struct drm_framebuffer *a; struct drm_framebuffer b; @@ ( - a->pixel_format + a->format->format | - b.pixel_format + b.format->format ) @@ struct drm_plane_state *a; struct drm_plane_state b; @@ ( - a->fb->pixel_format + a->fb->format->format | - b.fb->pixel_format + b.fb->format->format ) @@ struct drm_crtc *CRTC; @@ ( - CRTC->primary->fb->pixel_format + CRTC->primary->fb->format->format | - CRTC->primary->state->fb->pixel_format + CRTC->primary->state->fb->format->format ) @@ struct drm_mode_set *set; @@ ( - set->fb->pixel_format + set->fb->format->format | - set->crtc->primary->fb->pixel_format + set->crtc->primary->fb->format->format ) @@ @@ struct drm_framebuffer { ... - uint32_t pixel_format; ... }; v2: Fix commit message (Laurent) Rebase due to earlier removal of many fb->pixel_format uses, including the 'fb->format = drm_format_info(fb->format->format);' snafu v3: Adjusted the semantic patch a bit and regenerated due to code changes Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> (v1) Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: http://patchwork.freedesktop.org/patch/msgid/1481751175-18463-1-git-send-email-ville.syrjala@linux.intel.com
2016-12-15drm: Nuke fb->bits_per_pixelVille Syrjälä1-2/+2
Replace uses of fb->bits_per_pixel with fb->format->cpp[0]*8. Less duplicated information is a good thing. Note that I didn't put parens around the cpp*8 in the below cocci script, on account of not wanting spurious parens all over the place. Instead I did the unsafe way, and tried to look over the entire diff to spot if any dangerous expressions were produced. I didn't see any. There are some cases where previously the code did X*bpp/8, so the division happened after the multiplication. Those are now just X*cpp so the division effectively happens before the multiplication, but that is perfectly fine since bpp is always a multiple of 8. @@ struct drm_framebuffer *FB; expression E; @@ drm_helper_mode_fill_fb_struct(...) { ... - FB->bits_per_pixel = E; ... } @@ struct drm_framebuffer *FB; expression E; @@ i9xx_get_initial_plane_config(...) { ... - FB->bits_per_pixel = E; ... } @@ struct drm_framebuffer *FB; expression E; @@ ironlake_get_initial_plane_config(...) { ... - FB->bits_per_pixel = E; ... } @@ struct drm_framebuffer *FB; expression E; @@ skylake_get_initial_plane_config(...) { ... - FB->bits_per_pixel = E; ... } @@ struct drm_framebuffer FB; expression E; @@ ( - E * FB.bits_per_pixel / 8 + E * FB.format->cpp[0] | - FB.bits_per_pixel / 8 + FB.format->cpp[0] | - E * FB.bits_per_pixel >> 3 + E * FB.format->cpp[0] | - FB.bits_per_pixel >> 3 + FB.format->cpp[0] | - (FB.bits_per_pixel + 7) / 8 + FB.format->cpp[0] | - FB.bits_per_pixel + FB.format->cpp[0] * 8 | - FB.format->cpp[0] * 8 != 8 + FB.format->cpp[0] != 1 ) @@ struct drm_framebuffer *FB; expression E; @@ ( - E * FB->bits_per_pixel / 8 + E * FB->format->cpp[0] | - FB->bits_per_pixel / 8 + FB->format->cpp[0] | - E * FB->bits_per_pixel >> 3 + E * FB->format->cpp[0] | - FB->bits_per_pixel >> 3 + FB->format->cpp[0] | - (FB->bits_per_pixel + 7) / 8 + FB->format->cpp[0] | - FB->bits_per_pixel + FB->format->cpp[0] * 8 | - FB->format->cpp[0] * 8 != 8 + FB->format->cpp[0] != 1 ) @@ struct drm_plane_state *state; expression E; @@ ( - E * state->fb->bits_per_pixel / 8 + E * state->fb->format->cpp[0] | - state->fb->bits_per_pixel / 8 + state->fb->format->cpp[0] | - E * state->fb->bits_per_pixel >> 3 + E * state->fb->format->cpp[0] | - state->fb->bits_per_pixel >> 3 + state->fb->format->cpp[0] | - (state->fb->bits_per_pixel + 7) / 8 + state->fb->format->cpp[0] | - state->fb->bits_per_pixel + state->fb->format->cpp[0] * 8 | - state->fb->format->cpp[0] * 8 != 8 + state->fb->format->cpp[0] != 1 ) @@ @@ - (8 * 8) + 8 * 8 @@ struct drm_framebuffer FB; @@ - (FB.format->cpp[0]) + FB.format->cpp[0] @@ struct drm_framebuffer *FB; @@ - (FB->format->cpp[0]) + FB->format->cpp[0] @@ @@ struct drm_framebuffer { ... - int bits_per_pixel; ... }; v2: Clean up the 'cpp*8 != 8' and '(8 * 8)' cases (Laurent) v3: Adjusted the semantic patch a bit and regenerated due to code changes Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> (v1) Link: http://patchwork.freedesktop.org/patch/msgid/1481751140-18352-1-git-send-email-ville.syrjala@linux.intel.com
2016-09-30drm/exynos: use drm core to handle page-flip eventAndrzej Hajda1-9/+0
Exynos DRM framework handled page-flip event with custom code. The patch replaces it with drm-core vblank queue. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-09-30drm/exynos: mixer: simplify loop in vp_win_reset()Tobias Jakobi1-2/+2
A simple while loop should do the same here. Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-09-30drm/exynos: mixer: convert booleans to flags in mixer contextTobias Jakobi1-25/+30
The mixer context struct already has a 'flags' field, so we can use it to store the 'interlace', 'vp_enabled' and 'has_sclk' booleans. We use the non-atomic helper functions to access these bits. Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-07-29drm/exynos: use generic code for managing zpos plane propertyMarek Szyprowski1-2/+4
This patch replaces zpos property handling custom code in Exynos DRM driver with calls to generic DRM code. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Cc: Inki Dae <inki.dae@samsung.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Joonyoung Shim <jy0922.shim@samsung.com> Cc: Seung-Woo Kim <sw0312.kim@samsung.com> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Cc: Gustavo Padovan <gustavo@padovan.org> Cc: vincent.abriou@st.com Cc: fabien.dessenne@st.com Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2016-04-30drm/exynos: clean up wait_for_vblankInki Dae1-39/+0
This patch cleans up wait_for_vblank relevant codes. wait_for_vblank callback isn't used anymore in Exynos drm driver so it removes relevant codes. However, display controllers - FIMD and DECON - still use this function driver internally to ensure shadow registers to be updated, which resolves page fault issue so keep it. Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-04-30drm/exynos: mixer: use generic of_device_get_match_data helperMarek Szyprowski1-7/+3
Simplify code by replacing custom code by generic helper. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-04-30drm/exynos: mixer: remove support for non-dt platformsMarek Szyprowski1-16/+0
There are no non-devicetree based Exynos platforms in mainline, so there no point keeping old platform driver data for them. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-04-29drm/exynos/mixer: enable HDMI-PHY before configuring MIXERAndrzej Hajda1-0/+4
According to documentation HDMI-PHY must be on prior to MIXER configuration. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-02-01drm/exynos: fix building without CONFIG_PM_SLEEPArnd Bergmann1-4/+2
The runtime PM operations use the suspend/resume functions even when CONFIG_PM_SLEEP is not set, but this now fails for the exynos DRM driver: exynos_mixer.c:1289:61: error: 'exynos_mixer_resume' undeclared here (not in a function) SET_RUNTIME_PM_OPS(exynos_mixer_suspend, exynos_mixer_resume, NULL) This removes the #ifdef and instead marks the functions as __maybe_unused, which does the right thing in all cases and also looks nicer. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-01-12drm/exynos: mixer: properly update all planes on the same vblank eventMarek Szyprowski1-9/+25
This patch also moves mixer_vsync_set_update() to newly introduced mixer_atomic_begin/flush callbacks. This ensures that all mixer planes will be updated on the same vsync event. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-01-12drm/exynos: mixer: unify a check for video-processor windowMarek Szyprowski1-2/+2
Always use macro instead of hard-coded '2' value in conditions related to video processor window. Additional checks are not needed, because video layer is registered only when video processor is available. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-01-12drm/exynos: mixer: also allow ARGB1555 and ARGB4444Tobias Jakobi1-0/+6
Allow the remaining alpha formats now that blending is properly setup. Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-01-12drm/exynos: mixer: refactor layer setupMarek Szyprowski1-0/+43
Properly configure blending properties of given hardware layer based on the selected pixel format. Currently only per-pixel-based alpha is possible when respective pixel format has been selected. Configuration of global, per-plane alpha value, color key and background color will be added later. This patch is heavily inspired by earlier work done by Tobias Jakobi <tjakobi@math.uni-bielefeld.de>. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-01-12drm/exynos: mixer: remove all static blending setupTobias Jakobi1-23/+0
Previously blending setup was static and most of it was done in mixer_win_reset(). Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-01-12drm/exynos: mixer: set window priority based on zposMarek Szyprowski1-18/+21
'zpos' plane property is configurable, so adjust hardware layers priority based on the zpos value. 'zpos' value shifted by one can be used directly as hw priority value and stored to the registers, because mixer accepts priority values from 1 to 15 (0 means that layer is disabled). This patch also changes the default layer priority to match already exposed initial zpos values. The initial configuration is now: [top] video > gfx layer1 > gfx layer0 [bottom]. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-01-12drm/exynos: rename zpos to indexMarek Szyprowski1-7/+7
This patch renames zpos entry to index, because in most places it is used as index for selecting hardware layer/window instead of configurable layer position. This will later enable to make the zpos property configurable. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-12-13drm/exynos: mixer: use ratio precalculated in exynos_stateMarek Szyprowski1-30/+3
Common plane code already calculates and checks for supported scalling modes, so additional code in mixer driver can be now removed. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-12-13drm/exynos: add generic check for plane stateMarek Szyprowski1-0/+3
This patch adds generic check for plane state - display area dimensions, so drivers can always assume that they get valid plane state to set. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-12-13drm/exynos: introduce exynos_drm_plane_config structureMarek Szyprowski1-20/+24
This patch adds common structure for keeping plane configuration and capabilities data. This patch is inspired by similar code developed by Tobias Jakobi. Changelog v2: - fix vidi_win_types(i) call. vidi_win_types is not a function. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-12-13drm/exynos: mixer: enable video overlay plane only when VP is availableMarek Szyprowski1-0/+3
Video overlay plane should be registered only when suitable hardware sub-block (Video Processor) is available. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-12-13drm/exynos: mixer: use crtc->state->adjusted_mode instead of crtc->modeMarek Szyprowski1-2/+2
This patch replaces usage of crtc->mode with crtc->state->adjusted_mode like it is already done in common plane code. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-12-13drm/exynos: introduce exynos_drm_plane_state structureMarek Szyprowski1-28/+33
This patch introduces exynos_drm_plane_state structure, which subclasses drm_plane_state and holds precalculated data suitable for configuring Exynos hardware. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-12-13drm/exynos: move dma_addr attribute from exynos plane to exynos fbMarek Szyprowski1-3/+4
DMA address is a framebuffer attribute and the right place for it is exynos_drm_framebuffer not exynos_drm_plane. This patch also introduces helper function for getting dma address of the given framebuffer. Changelog v2: - use state->fb instead of plane->base.fb. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-12-13drm/exynos: add pm_runtime to MixerGustavo Padovan1-42/+64
Let pm_runtime handle the enabling/disabling of the device with proper refcnt instead of rely on specific flags to track the enabled state. Changelog v2: - revive MXR_BIT_POWERED flag to keep current dpms mode. Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-11-03drm/exynos/mixer: replace direct cross-driver call with drm mode validationAndrzej Hajda1-2/+4
HDMI driver called directly function from MIXER driver to invalidate modes not supported by MIXER. The patch replaces the hack with proper .atomic_check callback. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-10-26drm/exynos: add cursor plane supportGustavo Padovan1-2/+2
Set one of the planes for each crtc driver as a cursor plane enabled window managers to fully work on exynos. Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-10-26drm/exynos: add global macro for the default primary planeGustavo Padovan1-4/+3
Define DEFAULT_WIN as zero to help set the primary plane on all CRTCs. Some CRTCs were defining a variable to store the default window, but that is not necessary as the default (primary) window is always the window zero. Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-10-26drm: exynos: mixer: fix using usleep() in atomic contextTomasz Stanislawski1-1/+1
This patch fixes calling usleep_range() after taking reg_slock using spin_lock_irqsave(). The mdelay() is used instead. Waiting in atomic context is not the best idea in general. Hopefully, waiting occurs only when Video Processor fails to reset correctly. Signed-off-by: Tomasz Stanislawski <t.stanislaws@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-08-30drm/exynos: Properly report supported formats for each deviceMarek Szyprowski1-2/+28
Exynos DRM reported that all planes for all supported sub-devices supports only three pixel formats: XRGB24, ARGB24 and NV12. This patch lets each Exynos DRM sub-drivers to provide the list of supported pixel formats and registers this list to DRM core. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-08-30drm/exynos: check for pending fb before finish updateGustavo Padovan1-1/+9
The current code was ignoring the end of update for all overlay planes, caring only for the primary plane update in case of pageflip. This change adds a change to start to check for pending updates for all planes through exynos_plane->pending_fb. At the start of plane update the pending_fb is set with the fb to be shown on the screen. Then only when to fb is already presented in the screen we set pending_fb to NULL to signal that the update was finished. Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Inki Dae <inki.dae@samsung.com> fixup! drm/exynos: check for pending fb before finish update
2015-08-16drm/exynos: unify exynos_drm_plane names with drm coreGustavo Padovan1-11/+11
Rename crtc_{widht,height} to crtc_{w,h} and src_{width,height} to src_{w,h} to make it similar to the atomic state names. Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Reviewed-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-08-16drm/exynos: use drm atomic state directlyGustavo Padovan1-31/+34
For some fields the use of struct exynos_drm_plane filled with data from the plane state just creates a source of duplicated information and overhead. Here we change the crtc drivers to access the plane state directly simplifying the code by not relying on a exynos internal struct. Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Reviewed-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-08-16drm/exynos: pass struct exynos_drm_plane in update/enableGustavo Padovan1-9/+11
We already have the plane pointer in before calling .update_plane() or disable_plane() so pass it directly to those calls avoiding a new conversion from zpos to struct exynos_drm_plane. v2: don't remove check for suspended in FIMD (comment by Joonyoung) Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Reviewed-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-08-16drm/exynos: rename win_commit/disable to atomic-like namesGustavo Padovan1-5/+5
Rename win_commit() helper to update_plane() and win_disable() to disable_plane(). Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Reviewed-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-03-09 10:22:33 +0300