| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This function sends a hotplug uevent with a CONNECTOR property.
Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211018084707.32253-2-contact@emersion.fr
|
|
Add a fwnode pointer to struct drm_connector and register an acpi_bus_type
for the connectors with the ACPI subsystem (when CONFIG_ACPI is enabled).
The adding of the fwnode pointer allows drivers to associate a fwnode
that represents a connector with that connector.
When the new fwnode pointer points to an ACPI-companion, then the new
acpi_bus_type will cause the ACPI subsys to bind the device instantiated
for the connector with the fwnode by calling acpi_bind_one(). This will
result in a firmware_node symlink under /sys/class/card#-<connecter-name>/
which helps to verify that the fwnode-s and connectors are properly
matched.
Changes in v2:
- Make drm_connector_cleanup() call fwnode_handle_put() on
connector->fwnode and document this
Co-developed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Tested-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://lore.kernel.org/r/20210817215201.795062-3-hdegoede@redhat.com
|
|
Give connector sysfs devices there own device_type, this allows us to
check if a device passed to functions dealing with generic devices is
a drm_connector or not.
A check like this is necessary in the drm_connector_acpi_bus_match()
function added in the next patch in this series.
Tested-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://lore.kernel.org/r/20210817215201.795062-2-hdegoede@redhat.com
|
|
Fix the following coccicheck warning:
drivers/gpu/drm/drm_sysfs.c:172:8-16: WARNING: use scnprintf or sprintf
drivers/gpu/drm/drm_sysfs.c:185:8-16: WARNING: use scnprintf or sprintf
drivers/gpu/drm/drm_sysfs.c:159:8-16: WARNING: use scnprintf or sprintf
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1616375978-12151-1-git-send-email-tiantao6@hisilicon.com
|
|
drm connector notifies userspace on hotplug event prematurely before
late_register and mode_object register completes. This leads to a race
between userspace and kernel on updating the IDR list. So, move the
notification to end of connector register.
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Steve Cohen <cohens@codeaurora.org>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1591155451-10393-1-git-send-email-jsanka@codeaurora.org
|
|
Since snprintf() returns the would-be-output size instead of the
actual output size, the succeeding calls may go beyond the given
buffer limit. Fix it by replacing with scnprintf().
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20200311073540.7108-1-tiwai@suse.de
|
|
As we are not using the sysfs infrastructure anymore, link to it is
removed. And global srm data and mutex to protect it are removed,
with required handling at revocation check function.
v2:
srm_data is dropped and few more comments are addressed.
v3:
ptr passing around is fixed with functional testing.
v4:
fix htmldoc [lkp]
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Suggested-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20200212102942.26568-2-ramalingam.c@intel.com
|
|
DRM API for generating uevent for a status changes of connector's
property.
This uevent will have following details related to the status change:
HOTPLUG=1, CONNECTOR=<connector_id> and PROPERTY=<property_id>
Pekka have completed the Weston DRM-backend review in
https://gitlab.freedesktop.org/wayland/weston/merge_requests/48
and the UAPI for HDCP 2.2 looks good.
The userspace is accepted in Weston.
v2:
Minor fixes at KDoc comments [Daniel]
v3:
Check the property is really attached with connector [Daniel]
v4:
Typos and string length suggestions are addressed [Sean]
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Sean Paul <sean@poorly.run>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/320961/?series=57232&rev=14
|
|
Add generic code which creates symbolic links in sysfs, pointing to ddc
interface used by a particular video output. For example:
ls -l /sys/class/drm/card0-HDMI-A-1/ddc
lrwxrwxrwx 1 root root 0 Jun 24 10:42 /sys/class/drm/card0-HDMI-A-1/ddc \
-> ../../../../soc/13880000.i2c/i2c-2
This makes it easy for user to associate a display with its ddc adapter
and use e.g. ddcutil to control the chosen monitor.
This patch adds an i2c_adapter pointer to struct drm_connector. Particular
drivers can then use it instead of using their own private instance. If a
connector contains a ddc, then create a symbolic link in sysfs.
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/d470def6cd661b777faeee67b5838a4623c4010e.1564161140.git.andrzej.p@collabora.com
|
|
Maarten needs -rc4 backmerged so he can pull in the fbcon notifier
removal topic branch into drm-misc-next.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
Based on 1 normalized pattern(s):
this file is released under the gplv2
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 68 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Armijn Hemel <armijn@tjaldur.nl>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190531190114.292346262@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This picks up rc2 for us as well.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
|
|
The use of the drmP.h header file is deprecated.
Remove use from all files in drm/*
so people do not look there and follow a bad example.
Build tested allyesconfig,allmodconfig on x86, arm etc.
Including alpha that is as always more challenging than
the rest.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Link: https://patchwork.freedesktop.org/patch/msgid/20190526173535.32701-8-sam@ravnborg.org
|
|
On every hdcp revocation check request SRM is read from fw file
/lib/firmware/display_hdcp_srm.bin
SRM table is parsed and stored at drm_hdcp.c, with functions exported
for the services for revocation check from drivers (which
implements the HDCP authentication)
This patch handles the HDCP1.4 and 2.2 versions of SRM table.
v2:
moved the uAPI to request_firmware_direct() [Daniel]
v3:
kdoc added. [Daniel]
srm_header unified and bit field definitions are removed. [Daniel]
locking improved. [Daniel]
vrl length violation is fixed. [Daniel]
v4:
s/__swab16/be16_to_cpu [Daniel]
be24_to_cpu is done through a global func [Daniel]
Unused variables are removed. [Daniel]
unchecked return values are dropped from static funcs [Daniel]
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Acked-by: Satyeshwar Singh <satyeshwar.singh@intel.com>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Acked-by: Dave Airlie <airlied@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190507162745.25600-5-ramalingam.c@intel.com
|
|
Sending the exact same hotplug event is not great uapi. Luckily the
only already merged implementation of leases (in the -modesetting
driver) doesn't care about what kind of uevent it gets, and
unconditionally processes both hotplug and lease changes. So we can
still adjust the uapi here.
But e.g. weston tries to filter stuff, and I guess others might want
to do that too. Try to make that possible. Cc: stable since it's uapi
adjustement that we want to roll out everywhere.
Michel Dänzer mentioned on irc that -amdgpu also has lease support. It
has the same code flow as -modesetting though, so we can still go
ahead.
v2: Mention -amdgpu (Michel)
Cc: Keith Packard <keithp@keithp.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: stable@vger.kernel.org
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181129094226.30591-1-daniel.vetter@ffwll.ch
|
|
With the ioctl and driver prep done, we can remove everything else.
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: David Airlie <airlied@linux.ie>
Link: https://patchwork.freedesktop.org/patch/msgid/20180420065159.4531-4-daniel.vetter@ffwll.ch
|
|
- remove docs for internal func, doesn't add value
- add short overview snippet instead explaining that drivers don't
have to bother themselves with reg/unreg concerns
- drop the ttm comment about drmP.h, drmP.h is disappearing ...
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170404095304.17599-2-daniel.vetter@ffwll.ch
|
|
I just learned that &struct_name.member_name works and looks pretty
even. It doesn't (yet) link to the member directly though, which would
be really good for big structures or vfunc tables (where the
per-member kerneldoc tends to be long).
Also some minor drive-by polish where it makes sense, I read a lot
of docs ...
v2: Review from Gustavo.
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170125062657.19270-6-daniel.vetter@ffwll.ch
|
|
The drm_core.h header contains a set of constants meant to be used
throughout DRM. However, as it turns out, they're each used just once and
don't bring any benefit. They're also grossly mis-named and lack
name-spacing. This patch inlines them, or moves them into drm_internal.h
as appropriate:
- CORE_AUTHOR and CORE_DESC are inlined into corresponding MODULE_*()
macros. It's just confusing having to follow 2 pointers when trying to
find the definition of these fields. Grep'ping for MODULE_AUTHOR()
should reveal the full information, if there's no strong reason not to.
- CORE_NAME, CORE_DATE, CORE_MAJOR, CORE_MINOR, and CORE_PATCHLEVEL are
inlined into the sysfs 'version' attribute. They're stripped
everywhere else (which is just some printk() statements). CORE_NAME
just doesn't make *any* sense, as we hard-code it in many places,
anyway. The other constants are outdated and just serve
binary-compatibility purposes. Hence, inline them in 'version' sysfs
attribute (we might even try dropping it..).
- DRM_IF_MAJOR and DRM_IF_MINOR are moved into drm_internal.h as they're
only used by the global ioctl handlers. Furthermore, versioning
interfaces breaks backports and as such is deprecated, anyway. We just
keep them for historic reasons. I doubt anyone will ever modify them
again.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20160901124837.680-6-dh.herrmann@gmail.com
|
|
The PM core introduced the ability to keep devices runtime suspended
during the entire system suspend/resume process with commit aae4518b3124
("PM / sleep: Mechanism to avoid resuming runtime-suspended devices
unnecessarily"). Before this so-called "direct-complete" procedure was
introduced, devices were always runtime resumed only to be immediately
put to sleep again using their ->suspend hook. Direct-complete is
enabled by returning a positive value from the ->prepare hook. The PCI
core usually does this automatically.
Direct-complete is only available for a device if all children use it as
well. Currently we cannot support direct-complete for DRM drivers
because the DRM core automatically registers multiple DRM minors which
belong to device class drm_class, and drm_class uses a struct dev_pm_ops
which lacks the ->prepare callback.
While this could be solved by adding the missing ->prepare callback,
closer inspection shows that there are no DRM drivers left which declare
the legacy ->suspend and ->resume callbacks in their drm_driver struct.
The last ones to remove them were i915 with commit 1751fcf9f92e
("drm/i915: Fix module initialisation, v2.") and exynos with commit
e7fefb1d5af5 ("drm/exynos: remove legacy ->suspend()/resume()").
Consequently the struct dev_pm_ops of drm_class is now dead code. Remove
it. If no dev_pm_ops is declared for a device, the PM core automatically
enables direct-complete for it, thereby making that mechanism available
to the parent DRM PCI devices.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/da848fcd5ca72a35d9a722e644719977a47bb7ba.1465382836.git.lukas@wunner.de
|
|
For documentation and paranoia.
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1459331120-27864-4-git-send-email-daniel.vetter@ffwll.ch
|
|
This goes all the way back to the original KMS commit aeons ago
commit f453ba0460742ad027ae0c4c7d61e62817b3e7ef
Author: Dave Airlie <airlied@redhat.com>
Date: Fri Nov 7 14:05:41 2008 -0800
DRM: add mode setting support
But it seems to be completely unused. Only i915 and nouveau even
register these properties, and the corresponding DDX don't even look
at them. Also the sysfs files are read-only, so not useful to
configure anything.
I suspect that this was added with the goal to have read-only access
to all properties in sysfs, but we never followed through on that.
Also, that should be done in a more generic fashion.
Since it would be real work to fix up the locking (with atomic we're
now chasing pointers when reading properties) and it seems unused lets
just nuke this all. It's easier. Of course we'll keep the properties
themselves, those are still exposed through the KMS ioctls.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1459331120-27864-5-git-send-email-daniel.vetter@ffwll.ch
|
|
Use kobj_to_dev() instead of open-coding it.
Link: http://patchwork.freedesktop.org/patch/msgid/3fea991541fbfc4ffece2c174adeb02cb9436c90.1452696179.git.geliangtang@163.com
Signed-off-by: Geliang Tang <geliangtang@163.com>
|
|
To avoid even more code duplication punt this all to the probe worker,
which needs some slight adjustment to also generate a uevent when the
status has changed to due connector->force.
v2: Instead of running the output_poll_work (which is kinda the wrong
thing and a layering violation since it's an internal of the probe
helpers), or calling ->detect (which is again a layering violation
since it's used only by probe helpers) just call the official
->fill_modes function, like a GET_CONNECTOR ioctl call.
v3: Restore the accidentally removed forced-probe for echo "detect" >
force.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reported-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1447951610-12622-22-git-send-email-daniel.vetter@ffwll.ch
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
We chase pointers/lists without taking the locks protecting them,
which isn't that good.
Fix it.
v2: Actually unlock properly, spotted by Julia.
v3: Put the label _before_ the mutex_unlock (Emil)
Cc: Emil Velikov <emil.l.velikov@gmail.com>
Cc: Julia Lawall <julia.lawall@lip6.fr>
Link: http://patchwork.freedesktop.org/patch/msgid/1443783662-23066-1-git-send-email-daniel.vetter@ffwll.ch
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into drm-next
Backmerge the drm-fixes pull from Linus's tree into drm-next.
This is to fix some conflicts and make future pulls cleaner
|
|
With atomic drivers we need to make sure that (at least in general)
property reads hold the right locks. But the legacy dpms property is
special and can be read locklessly. Since userspace loves to just
randomly look at that all the time (like with "status") do that.
To make it clear that we play tricks use the READ_ONCE compiler
barrier (and also for paranoia).
Note that there's not really anything bad going on since even with the
new atomic paths we eventually end up not chasing any pointers (and
hence possibly freed memory and other fun stuff). The locking WARNING
has been added in
commit 88a48e297b3a3bac6022c03babfb038f1a886cea
Author: Rob Clark <robdclark@gmail.com>
Date: Thu Dec 18 16:01:50 2014 -0500
drm: add atomic properties
but since drivers are converting not everyone will have seen this from
the start.
Jens reported this and submitted a patch to just grab the
mode_config.connection_mutex, but we can do a bit better.
v2: Remove unused variables I failed to git add for real.
Reference: http://mid.gmane.org/20150928194822.GA3930@kernel.dk
Reported-by: Jens Axboe <axboe@fb.com>
Tested-by: Jens Axboe <axboe@fb.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
Right now, drm_sysfs_create() returns the newly allocated "struct class"
to the caller (which is drm_core_init()), which then has to set the
global variable 'drm_class'. During cleanup, though, we call
drm_sysfs_destroy() which implicitly uses the global 'drm_class'. This is
confusing, as ownership of the global 'drm_class' is non-obvious.
This patch changes drm_sysfs_create() to drm_sysfs_init() and makes it
initialize the 'drm_class' object directly, rather than returning it.
This way, both drm_sysfs_init() and drm_sysfs_destroy() work in a similar
fashion and manage the global drm class.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
Simplify `foo == NULL || IS_ERR(foo)` via IS_ERR_OR_NULL(). This is
pretty commonly used all over the kernel, especially for debugfs/sysfs
cleanup paths.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
Pull drm updates from Dave Airlie:
"This is the main drm pull request for v4.2.
I've one other new driver from freescale on my radar, it's been posted
and reviewed, I'd just like to get someone to give it a last look, so
maybe I'll send it or maybe I'll leave it.
There is no major nouveau changes in here, Ben was working on
something big, and we agreed it was a bit late, there wasn't anything
else he considered urgent to merge.
There might be another msm pull for some bits that are waiting on
arm-soc, I'll see how we time it.
This touches some "of" stuff, acks are in place except for the fixes
to the build in various configs,t hat I just applied.
Summary:
New drivers:
- virtio-gpu:
KMS only pieces of driver for virtio-gpu in qemu.
This is just the first part of this driver, enough to run
unaccelerated userspace on. As qemu merges more we'll start
adding the 3D features for the virgl 3d work.
- amdgpu:
a new driver from AMD to driver their newer GPUs. (VI+)
It contains a new cleaner userspace API, and is a clean
break from radeon moving forward, that AMD are going to
concentrate on. It also contains a set of register headers
auto generated from AMD internal database.
core:
- atomic modesetting API completed, enabled by default now.
- Add support for mode_id blob to atomic ioctl to complete interface.
- bunch of Displayport MST fixes
- lots of misc fixes.
panel:
- new simple panels
- fix some long-standing build issues with bridge drivers
radeon:
- VCE1 support
- add a GPU reset counter for userspace
- lots of fixes.
amdkfd:
- H/W debugger support module
- static user-mode queues
- support killing all the waves when a process terminates
- use standard DECLARE_BITMAP
i915:
- Add Broxton support
- S3, rotation support for Skylake
- RPS booting tuning
- CPT modeset sequence fixes
- ns2501 dither support
- enable cmd parser on haswell
- cdclk handling fixes
- gen8 dynamic pte allocation
- lots of atomic conversion work
exynos:
- Add atomic modesetting support
- Add iommu support
- Consolidate drm driver initialization
- and MIC, DECON and MIPI-DSI support for exynos5433
omapdrm:
- atomic modesetting support (fixes lots of things in rewrite)
tegra:
- DP aux transaction fixes
- iommu support fix
msm:
- adreno a306 support
- various dsi bits
- various 64-bit fixes
- NV12MT support
rcar-du:
- atomic and misc fixes
sti:
- fix HDMI timing complaince
tilcdc:
- use drm component API to access tda998x driver
- fix module unloading
qxl:
- stability fixes"
* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (872 commits)
drm/nouveau: Pause between setting gpu to D3hot and cutting the power
drm/dp/mst: close deadlock in connector destruction.
drm: Always enable atomic API
drm/vgem: Set unique to "vgem"
of: fix a build error to of_graph_get_endpoint_by_regs function
drm/dp/mst: take lock around looking up the branch device on hpd irq
drm/dp/mst: make sure mst_primary mstb is valid in work function
of: add EXPORT_SYMBOL for of_graph_get_endpoint_by_regs
ARM: dts: rename the clock of MIPI DSI 'pll_clk' to 'sclk_mipi'
drm/atomic: Don't set crtc_state->enable manually
drm/exynos: dsi: do not set TE GPIO direction by input
drm/exynos: dsi: add support for MIC driver as a bridge
drm/exynos: dsi: add support for Exynos5433
drm/exynos: dsi: make use of array for clock access
drm/exynos: dsi: make use of driver data for static values
drm/exynos: dsi: add macros for register access
drm/exynos: dsi: rename pll_clk to sclk_clk
drm/exynos: mic: add MIC driver
of: add helper for getting endpoint node of specific identifiers
drm/exynos: add Exynos5433 decon driver
...
|
|
Writing to a file is supposed to return the number of bytes written.
Returning zero unfortunately causes bash to constantly spin trying
to write to the sysfs file, to such an extent that even ^c and ^z
have no effect. The only way out of that is to kill the shell and
log back in. This isn't nice behaviour.
Fix it by returning the number of characters written to sysfs files.
[airlied: used suggestion from Al Viro]
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
These attributes should be exposed for the matching connector types
only, so checking is redundant.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
The show methods for the attributes of DVI-I and TV-out types have a
bunch of code to deal with the differences between the two. Just split
the attributes into connector type specific ones. No functional changes.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
Split DVI-I and TV-out (which remains a group of types). As an
intermediate step, still share the attributes themselves between the
two. No user visible changes.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
This reduces duplication in the patches to follow. No functional
changes.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
Since the beginning, sysfs/connector/status has done a heavyweight
detection of the current connector status. But no user, such as upowerd
or logind, has ever desired to initiate a probe. Move the probing into a
new attribute so that existing readers get the behaviour they desire.
v2: David Herrmann suggested using "echo detect > /sys/.../status" to
trigger the probing, which is a fine idea. This extends that to also
allow the user to apply the force detection overrides at runtime.
v3: Now with airlied's email address fixed! Requires sysfs_streq()
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Herrmann <dh.herrmann@gmail.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Alex Deucher <alexdeucher@gmail.com>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
Instead of manual calls of device_create_file() and
device_remove_file(), assign the static attribute groups to the device
with device_create_with_groups(). The conditionally built sysfs
entries are handled via is_visible callback.
This simplifies the code and also avoids the possible races.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
This way drivers can't grow crazy ideas any more, and it also
helps a bit in reviewing EXPORT_SYMBOLS.
v2: Even more stuff. Unfortunately we can't move drm_vm_open_locked
because exynos does some horrible stuff with it.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
For each minor we allocate a sysfs device as minor->kdev. Currently, this
is allocated and registered in drm_minor_register(). This makes it
impossible to add sysfs-attributes to the device before it is registered.
Therefore, they are not added atomically, nor can we move device_add()
*after* ->load() is called.
This patch makes minor->kdev available early, but only adds the device
during minor-registration. Note that the registration is still called
before ->load() as debugfs needs to be split, too. This will be fixed in
follow-ups.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
|
|
Introduce generic functions to register and unregister connectors. This
provides a common place to add and remove associated user space
interfaces.
Signed-off-by: Thomas Wood <thomas.wood@intel.com>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
Generated using semantic patch:
@@
expression E;
@@
- drm_get_connector_name(E)
+ E->name
[airlied: regenerated]
Acked-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
Copy/Paste typo.. we need to test for ->kdev instead of ->dev.
Reported-by: Juha Leppänen <juha_efku@dnainternet.net>
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
airlied:
The lifetime changes introduced in 5bdebb183c9702a8c57a01dff09337be3de337a6
tried to use device_create, however that led to the regression where dev->type
wasn't getting set correctly. First attempt at fixing it would have led to
a race, so this undoes the device_createa work and does it all manually
making sure the dev->type is setup before we register the device.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
multiple times
drm_connector_sysfs_add() explicitly checks if connector->kdev
is already populated and returns success. So it clearly now allows
being called multiple times. Remove some stale comments to the contrary.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
device_unregister() already drops its reference to the struct device, so
explicitly calling put_device() before device_unregister() can cause the
device to have been freed before it can be unregistered.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Tested-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Tested-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
So drm was abusing device lifetimes, by having embedded device structures
in the minor and connector it meant that the lifetime of the internal drm
objects (drm_minor and drm_connector) were tied to the lifetime of the device
files in sysfs, so if something kept those files opened the current code
would kfree the objects and things would go downhill from there.
Now in reality there is no need for these lifetimes to be so intertwined,
especailly with hotplugging of devices where we wish to remove the sysfs
and userspace facing pieces before we can unwind the internal objects due
to open userspace files or mmaps, so split the objects out so the struct
device is no longer embedded and do what fbdev does and just allocate
and remove the sysfs inodes separately.
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
Convert drivers/gpu/drm class to use dev_pm_ops for power management and
remove Legacy PM ops hooks. With this change, drm class registers
suspend/resume callbacks via class->pm (dev_pm_ops) instead of Legacy
class->suspend/resume. When __device_suspend() runs call-backs, it will
find class->pm ops for the drm class.
drm_class_suspend() hook calls driver legacy ops with the state information.
e.g: drm_class_suspend() calls into driver suspend routines
via drm_dev->driver->suspend(drm_dev, state).
Once drm_class_suspend() is converted to dev_pm_ops, it will no longer
have access to pm_transition which it has to pass into driver legacy
suspend calls. A new freeze and suspend hooks are added to address the not
having access to the state information. The new freeze and suspend hooks
simply call __drm_class_suspend() with the appropriate pm state information.
__drm_class_suspend() is the original suspend hook with a new name.
Signed-off-by: Shuah Khan <shuah.kh@samsung.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
Replace references to and remove the connector property fxns, which
have been superseded with the more general object property fxns:
+ drm_connector_attach_property -> drm_object_attach_property
+ drm_connector_property_set_value -> drm_object_property_set_value
+ drm_connector_property_get_value -> drm_object_property_get_value
Signed-off-by: Rob Clark <rob@ti.com>
|
|
Convert #include "..." to #include <path/...> in drivers/gpu/.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Dave Airlie <airlied@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Dave Jones <davej@redhat.com>
|
|
If drm can't find proc it should fail more gracefully, than just
oopsing, this tests drm_class is NULL, and sets it to NULL in the
fail paths.
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
