| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The DATAEN_ACTIVE_LOW bit in DSI_DPI_CFG_POL register is set to zero,
so set the DRM_BUS_FLAG_DE_HIGH flag in input_bus_cfg.flags. It appears
that the DRM_BUS_FLAG_PIXDATA_SAMPLE_NEGEDGE flag also makes sense, so
set it in input_bus_cfg.flags too. With this patch, the flags set by
drm_atomic_bridge_propagate_bus_flags() are overridden (see comment in
that function) in case any downstream bridges propagates invalid flags
to this bridge. A real problematic case is to connect a RM67191 MIPI
DSI panel whose driver sets DRM_BUS_FLAG_DE_LOW and
DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE bus flags.
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230821034008.3876938-4-victor.liu@nxp.com
|
|
Introduce ->get_input_bus_fmts() callback to struct dw_mipi_dsi_plat_data
so that vendor drivers can implement specific methods to get input bus
formats for Synopsys DW MIPI DSI.
While at it, implement a generic callback for ->atomic_get_input_bus_fmts(),
where we try to get the input bus formats through pdata->get_input_bus_fmts()
first. If it's unavailable, fall back to the only format - MEDIA_BUS_FMT_FIXED,
which matches the default behavior if ->atomic_get_input_bus_fmts() is not
implemented as ->atomic_get_input_bus_fmts()'s kerneldoc indicates.
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230821034008.3876938-3-victor.liu@nxp.com
|
|
Add dw_mipi_dsi_get_bridge() helper so that it can be used by vendor
drivers which implement vendor specific extensions to Synopsys DW MIPI DSI.
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230821034008.3876938-2-victor.liu@nxp.com
|
|
As per spec, it is allowed to pulse the HPD signal to indicate that the
EDID information has changed. Some monitors do this when they wake up
from standby or are enabled. When the HPD goes low the adv7511 is
reset and the outputs are disabled which might cause the monitor to
go to standby again. To avoid this we ignore the HPD pin for the
first few seconds after enabling the output. On the other hand,
adv7535 require to enable HPD Override bit for proper HPD.
Add hpd_override_enable variable to struct adv7511_chip_info to handle
this scenario.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230830142358.275459-9-biju.das.jz@bp.renesas.com
|
|
The ADV7511 needs link configuration whereas ADV75{33,35} does not need
it. Add a variable link_config to struct adv7511_chip_info to handle
this difference.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230830142358.275459-8-biju.das.jz@bp.renesas.com
|
|
The ADV7533 and ADV7535 have DSI support. Add a variable has_dsi to
struct adv7511_chip_info for handling configuration related to DSI.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230830142358.275459-7-biju.das.jz@bp.renesas.com
|
|
The ADV7533 and ADV7535 have an offset(0x70) for the CEC register map
compared to ADV7511. Add the reg_cec_offset variable to struct
adv7511_chip_info to handle this difference and drop the reg_cec_offset
variable from struct adv7511.
This will avoid assigning reg_cec_offset based on chip type and also
testing for multiple chip types by calling adv7533_patch_cec_registers().
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230830142358.275459-6-biju.das.jz@bp.renesas.com
|
|
adv7511_chip_info
The ADV7511 has 5 power supplies compared to 7 that of ADV75{33,35}. Add
supply_names and num_supplies variables to struct adv7511_chip_info to
handle this difference.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230830142358.275459-5-biju.das.jz@bp.renesas.com
|
|
The ADV7533 supports a maximum lane clock of 800MHz whereas it is 891MHz
for ADV7535. Add max_lane_freq_khz variable to struct adv7511_chip_info to
handle this difference.
While at it, drop the unused local variable max_lane_freq.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230830142358.275459-4-biju.das.jz@bp.renesas.com
|
|
The ADV7533 supports a maximum pixel clock of 80MHz whereas it is 148.5MHz
for ADV7535. Add max_mode_clock_khz variable to struct adv7511_chip_info to
handle this difference.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Adam Ford <aford173@gmail.com>
Tested-by: Adam Ford <aford173@gmail.com> #imx8mm-beacon
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230830142358.275459-3-biju.das.jz@bp.renesas.com
|
|
Add struct adv7511_chip_info to handle hw differences between various
chips rather checking against the 'type' variable in various places.
Replace 'adv->type'->'info->type' by moving variable 'type' from
struct adv7511 to struct adv7511_chip_info and add adv7511_chip_info as
device data for both OF and ID tables instead of the device type.
Simplify the probe() by replacing of_device_get_match_data() and ID lookup
for retrieving match data with i2c_get_match_data().
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Tested-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230830142358.275459-2-biju.das.jz@bp.renesas.com
|
|
Migrate away from custom EDID parsing and validity checks.
Note: This is a follow-up to the original RFC by Jani [1]. The first
submission in this series should have been marked v2.
[1] https://patchwork.freedesktop.org/patch/msgid/20230901102400.552254-1-jani.nikula@intel.com
Co-developed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ian Ray <ian.ray@ge.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230921104751.56544-1-ian.ray@ge.com
|
|
Instead of requiring each driver to care for assigning the owner member
of struct pwm_ops, handle that implicitly using a macro. Note that the
owner member has to be moved to struct pwm_chip, as the ops structure
usually lives in read-only memory and so cannot be modified.
The upside is that new low level drivers cannot forget the assignment and
save one line each. The pwm-crc driver didn't assign .owner, that's not
a problem in practice though as the driver cannot be compiled as a
module.
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com> # Intel LPSS
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> # pwm-{bcm,brcm}*.c
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> # sun4i
Acked-by: Andi Shyti <andi.shyti@kernel.org>
Acked-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> # pwm-visconti
Acked-by: Heiko Stuebner <heiko@sntech.de> # pwm-rockchip
Acked-by: Michael Walle <michael@walle.cc> # pwm-sl28cpld
Acked-by: Neil Armstrong <neil.armstrong@linaro.org> # pwm-meson
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230804142707.412137-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
The kernel produces a warning splat and the DSI device fails to register
in this driver if the i2c driver probes, populates child auxiliary
devices, and then somewhere in ti_sn_bridge_probe() a function call
returns -EPROBE_DEFER. When the auxiliary driver probe defers, the dsi
device created by devm_mipi_dsi_device_register_full() is left
registered because the devm managed device used to manage the lifetime
of the DSI device is the parent i2c device, not the auxiliary device
that is being probed.
Associate the DSI device created and managed by this driver to the
lifetime of the auxiliary device, not the i2c device, so that the DSI
device is removed when the auxiliary driver unbinds. Similarly change
the device pointer used for dev_err_probe() so the deferred probe errors
are associated with the auxiliary device instead of the parent i2c
device so we can narrow down future problems faster.
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Maxime Ripard <maxime@cerno.tech>
Fixes: c3b75d4734cb ("drm/bridge: sn65dsi86: Register and attach our DSI device at probe")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231002235407.769399-1-swboyd@chromium.org
|
|
Updating drm-misc-next to the state of Linux v6.6-rc2.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
|
|
Calculating the byte_clk in kHz is imprecise for a hs_clock of 55687500
Hz, which may be used with a pixel clock of 74.25 MHz with mode
1920x1080-30.
Fix the calculation by using HZ instead of kHZ.
This requires to change the type to u64 to prevent overflows of the
integer type.
Reviewed-by: Adam Ford <aford173@gmail.com> #imx8mm-beacon
Tested-by: Adam Ford <aford173@gmail.com> #imx8mm-beacon
Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de> # Kontron BL i.MX8MM + Waveshare 10.1inch HDMI LCD (E)
Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20230818-samsung-dsim-v2-5-846603df0e0a@pengutronix.de
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230818-samsung-dsim-v2-5-846603df0e0a@pengutronix.de
|
|
Rounding the porches up instead of down fixes the samsung-dsim at
some more resolutions and refresh rates:
The following resolutions are working with rounded-up porches, but don't
work when the porches are rounded down:
1920x1080-59.94
1920x1080-30.00
1920x1080-29.97
1920x1080-25.00
1680x1050-59.88
1280x1024-75.02
1200x960-59.99
1280x720-50.00
1024x768-75.03
1024x768-60.00
640x480-60.00
640x480-59.94
Reviewed-by: Adam Ford <aford173@gmail.com> #imx8mm-beacon
Tested-by: Adam Ford <aford173@gmail.com> #imx8mm-beacon
Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de> # Kontron BL i.MX8MM + Waveshare 10.1inch HDMI LCD (E)
Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20230818-samsung-dsim-v2-4-846603df0e0a@pengutronix.de
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230818-samsung-dsim-v2-4-846603df0e0a@pengutronix.de
|
|
The PLL requires a clock frequency in a certain platform-dependent range
after the pre-divider. The reference clock for the PLL may change due to
changes to it's parent clock. Thus, the frequency may be out of range or
unsuited for generating the high speed clock for MIPI DSI.
Try to keep the pre-devider small, and set the reference clock close to
the upper limit before recalculating the PLL configuration. Use a
divider with a power of two for the reference clock as this seems to
work best in my tests.
Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de> # Kontron BL i.MX8MM + Waveshare 10.1inch HDMI LCD (E)
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20230818-samsung-dsim-v2-3-846603df0e0a@pengutronix.de
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230818-samsung-dsim-v2-3-846603df0e0a@pengutronix.de
|
|
The PLL reference clock may change at runtime when its parent clock
changes. For example, this may happen on the i.MX8M Nano if the
reference clock is a child of the Video PLL. If the pixel clock changes,
this may propagate to the Video PLL and as a side effect change the
reference clock. Thus, reading the clock rate during probe is not
sufficient to correctly configure the PLL for the expected hs clock.
Read the actual rate of the reference clock before calculating the PLL
configuration parameters.
Note that the "samsung,pll-clock-frequency" is always preferred and PLL
reference clock is only read from the clock tree if that device tree
property is not set.
Reviewed-by: Inki Dae <inki.dae@samsung.com>
Acked-by: Inki Dae <inki.dae@samsung.com>
Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de> # Kontron BL i.MX8MM + Waveshare 10.1inch HDMI LCD (E)
Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20230818-samsung-dsim-v2-2-846603df0e0a@pengutronix.de
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230818-samsung-dsim-v2-2-846603df0e0a@pengutronix.de
|
|
Since the MIPI configuration can be changed on demand it is very useful
to print more MIPI settings during the MIPI device attach step.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Adam Ford <aford173@gmail.com> #imx8mm-beacon
Tested-by: Adam Ford <aford173@gmail.com> #imx8mm-beacon
Reviewed-by: Inki Dae <inki.dae@samsung.com>
Acked-by: Inki Dae <inki.dae@samsung.com>
Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de> # Kontron BL i.MX8MM + Waveshare 10.1inch HDMI LCD (E)
Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20230818-samsung-dsim-v2-1-846603df0e0a@pengutronix.de
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230818-samsung-dsim-v2-1-846603df0e0a@pengutronix.de
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
samsung_dsim_remove() returned 0 unconditionally. Make it return void
instead to convert the two related platform drivers to use
.remove_new().
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Inki Dae <inki.dae@samsung.com>
Acked-by: Inki Dae <inki.dae@samsung.com>
Link: https://lore.kernel.org/r/20230919103939.1367659-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230919103939.1367659-1-u.kleine-koenig@pengutronix.de
|
|
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231001-drm-sn65dsi83-maple-v1-1-cf8ad22b6be0@kernel.org
|
|
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231001-drm-lt9211-maple-v1-1-1cf74fb10991@kernel.org
|
|
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231001-drm-chipone-maple-v1-1-fb3ce5a53710@kernel.org
|
|
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231001-drm-tc358767-maple-v1-1-f759fcc4bd98@kernel.org
|
|
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231001-drm-dlpc3433-maple-v1-1-7d71170c010b@kernel.org
|
|
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230929-drm-adv7511-v1-1-b871b28ee594@kernel.org
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v6.7-rc1:
UAPI Changes:
- drm_file owner is now updated during use, in the case of a drm fd
opened by the display server for a client, the correct owner is
displayed.
- Qaic gains support for the QAIC_DETACH_SLICE_BO ioctl to allow bo
recycling.
Cross-subsystem Changes:
- Disable boot logo for au1200fb, mmpfb and unexport logo helpers.
Only fbcon should manage display of logo.
- Update freescale in MAINTAINERS.
- Add some bridge files to bridge in MAINTAINERS.
- Update gma500 driver repo in MAINTAINERS to point to drm-misc.
Core Changes:
- Move size computations to drm buddy allocator.
- Make drm_atomic_helper_shutdown(NULL) a nop.
- Assorted small fixes in drm_debugfs, DP-MST payload addition error handling.
- Fix DRM_BRIDGE_ATTACH_NO_CONNECTOR handling.
- Handle bad (h/v)sync_end in EDID by clipping to htotal.
- Build GPUVM as a module.
Driver Changes:
- Simple drivers don't need to cache prepared result.
- Call drm_atomic_helper_shutdown() in shutdown/unbind for a whole lot
more drm drivers.
- Assorted small fixes in amdgpu, ssd130x, bridge/it6621, accel/qaic,
nouveau, tc358768.
- Add NV12 for komeda writeback.
- Add arbitration lost event to synopsis/dw-hdmi-cec.
- Speed up s/r in nouveau by not restoring some big bo's.
- Assorted nouveau display rework in preparation for GSP-RM,
especially related to how the modeset sequence works and
the DP sequence in relation to link training.
- Update anx7816 panel.
- Support NVSYNC and NHSYNC in tegra.
- Allow multiple power domains in simple driver.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/f1fae5eb-25b8-192a-9a53-215e1184ce81@linux.intel.com
|
|
directly
Make drm_bridge_get_edid() the one place to call the hook.
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Cc: Robert Foss <rfoss@kernel.org>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230914131450.2473061-2-jani.nikula@intel.com
|
|
For the no-interrupt design (sink device is panel, polling HPD
status when chip power on), anx7625 FW has more than 200ms HPD
de-bounce time in FW, for the safety to get HPD status, driver
better to wait 200ms before HPD detection after OS resume back.
Signed-off-by: Xin Ji <xji@analogixsemi.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230922093450.3574349-1-xji@analogixsemi.com
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v6.7-rc1:
UAPI Changes:
- Nouveau changed to not set NO_PREFETCH flag explicitly.
Cross-subsystem Changes:
- Update documentation of dma-buf intro and uapi.
- fbdev/sbus fixes.
- Use initializer macros in a lot of fbdev drivers.
- Add Boris Brezillon as Panfrost driver maintainer.
- Add Jessica Zhang as drm/panel reviewer.
- Make more fbdev drivers use fb_ops helpers for deferred io.
- Small hid trailing whitespace fix.
- Use fb_ops in hid/picolcd
Core Changes:
- Assorted small fixes to ttm tests, drm/mst.
- Documentation updates to bridge.
- Add kunit tests for some drm_fb functions.
- Rework drm_debugfs implementation.
- Update xe documentation to mark todos as completed.
Driver Changes:
- Add support to rockchip for rv1126 mipi-dsi and vop.
- Assorted small fixes to nouveau, bridge/samsung-dsim,
bridge/lvds-codec, loongson, rockchip, panfrost, gma500, repaper,
komeda, virtio, ssd130x.
- Add support for simple panels Mitsubishi AA084XE01,
JDI LPM102A188A,
- Documentation updates to accel/ivpu.
- Some nouveau scheduling/fence fixes.
- Power management related fixes and other fixes to ivpu.
- Assorted bridge/it66121 fixes.
- Make platform drivers return void in remove() callback.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3da6554b-3b47-fe7d-c4ea-21f4f819dbb6@linux.intel.com
|
|
When external bridges are attached with DRM_BRIDGE_ATTACH_NO_CONNECTOR,
the panel bridge may also get the same flag, but in the .attach()
callback for the panel bridge a device link is added only when this
flag is not present; To make things worse, the .detach() callback
tries to delete the device link unconditionally and without checking
if it was created in the first place, crashing the kernel with a NULL
pointer kernel panic upon calling panel_bridge_detach().
Fix that by moving the device_link_add() call before checking if the
DRM_BRIDGE_ATTACH_NO_CONNECTOR flag is present.
Fixes: 199cf07ebd2b ("drm/bridge: panel: Add a device link between drm device and panel device")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Liu Ying <victor.liu@nxp.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230920082727.57729-1-angelogioacchino.delregno@collabora.com
|
|
The DSI horizontal timing calculations done by the driver seem to often
lead to underflows or overflows, depending on the videomode.
There are two main things the current driver doesn't seem to get right:
DSI HSW and HFP, and VSDly. However, even following Toshiba's
documentation it seems we don't always get a working display.
This patch attempts to fix the horizontal timings for DSI event mode, and
on a system with a DSI->HDMI encoder, a lot of standard HDMI modes now
seem to work. The work relies on Toshiba's documentation, but also quite
a bit on empirical testing.
This also adds timing related debug prints to make it easier to improve
on this later.
The DSI pulse mode has only been tested with a fixed-resolution panel,
which limits the testing of different modes on DSI pulse mode. However,
as the VSDly calculation also affects pulse mode, so this might cause a
regression.
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Tested-by: Maxim Schwalm <maxim.schwalm@gmail.com> # Asus TF700T
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230906-tc358768-v4-12-31725f008a50@ideasonboard.com
|
|
The tc358768_ns_to_cnt() is, most likely, supposed to do a div-round-up
operation, but it misses subtracting one from the dividend.
Fix this by just using DIV_ROUND_UP().
Fixes: ff1ca6397b1d ("drm/bridge: Add tc358768 driver")
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Tested-by: Maxim Schwalm <maxim.schwalm@gmail.com> # Asus TF700T
Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230906-tc358768-v4-11-31725f008a50@ideasonboard.com
|
|
The driver defines TC358768_PRECISION as 1000, and uses "nsk" to refer
to clock periods. The original author does not remember where all this
came from. Effectively the driver is using picoseconds as the unit for
clock periods, yet referring to them by "nsk".
Clean this up by just saying the periods are in picoseconds.
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Tested-by: Maxim Schwalm <maxim.schwalm@gmail.com> # Asus TF700T
Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230906-tc358768-v4-10-31725f008a50@ideasonboard.com
|
|
The Toshiba documentation talks about HSByteClk when referring to the
DSI HS byte clock, whereas the driver uses 'dsibclk' name. Also, in a
few places the driver calculates the byte clock from the DSI clock, even
if the byte clock is already available in a variable.
To align the driver with the documentation, change the 'dsibclk'
variable to 'hsbyteclk'. This also make it easier to visually separate
'dsibclk' and 'dsiclk' variables.
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Tested-by: Maxim Schwalm <maxim.schwalm@gmail.com> # Asus TF700T
Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230906-tc358768-v4-9-31725f008a50@ideasonboard.com
|
|
Simplify the code by capturing the priv->dev value to dev variable, and
use it.
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Tested-by: Maxim Schwalm <maxim.schwalm@gmail.com> # Asus TF700T
Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230906-tc358768-v4-8-31725f008a50@ideasonboard.com
|
|
The driver debug prints DSI related timings as raw register values in
hex. It is much more useful to see the "logical" value of the timing,
not the register value.
Change the prints to print the values separately, in case a single
register contains multiple values, and use %u to have it in a more human
consumable form.
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Tested-by: Maxim Schwalm <maxim.schwalm@gmail.com> # Asus TF700T
Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230906-tc358768-v4-7-31725f008a50@ideasonboard.com
|
|
The TC358768 documentation uses HFP, HBP, etc. values to deal with the
video mode, while the driver currently uses the DRM display mode
(htotal, hsync_start, etc).
Change the driver to convert the DRM display mode to struct videomode,
which then allows us to use the same units the documentation uses. This
makes it much easier to work on the code when using the TC358768
documentation as a reference.
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Tested-by: Maxim Schwalm <maxim.schwalm@gmail.com> # Asus TF700T
Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230906-tc358768-v4-6-31725f008a50@ideasonboard.com
|
|
As is quite common, some of TC358768's PLL register fields are to be
programmed with (value - 1). Specifically, the FBD and PRD, multiplier
and divider, are such fields.
However, what the driver currently does is that it considers that the
formula used for PLL rate calculation is:
RefClk * [(FBD + 1)/ (PRD + 1)] * [1 / (2^FRS)]
where FBD and PRD are values directly from the registers, while a more
sensible way to look at it is:
RefClk * FBD / PRD * (1 / (2^FRS))
and when the FBD and PRD values are written to the registers, they will
be subtracted by one.
Change the driver accordingly, as it simplifies the PLL code.
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Tested-by: Maxim Schwalm <maxim.schwalm@gmail.com> # Asus TF700T
Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230906-tc358768-v4-5-31725f008a50@ideasonboard.com
|
|
The driver has a few places where it does:
if (thing_is_enabled_in_config)
update_thing_bit_in_hw()
This means that if the thing is _not_ enabled, the bit never gets
cleared. This affects the h/vsyncs and continuous DSI clock bits.
Fix the driver to always update the bit.
Fixes: ff1ca6397b1d ("drm/bridge: Add tc358768 driver")
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Tested-by: Maxim Schwalm <maxim.schwalm@gmail.com> # Asus TF700T
Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230906-tc358768-v4-4-31725f008a50@ideasonboard.com
|
|
As the TC358768 is a DPI to DSI bridge, the DSI side does not need to
define h/v sync polarities. This means that sometimes we have a mode
without defined sync polarities, which does not work on the DPI side.
Add a mode_fixup hook to default to positive sync polarities.
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Tested-by: Maxim Schwalm <maxim.schwalm@gmail.com> # Asus TF700T
Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230906-tc358768-v4-3-31725f008a50@ideasonboard.com
|
|
smatch reports:
drivers/gpu/drm/bridge/tc358768.c:223 tc358768_update_bits() error: uninitialized symbol 'orig'.
Fix this by bailing out from tc358768_update_bits() if the
tc358768_read() produces an error.
Fixes: ff1ca6397b1d ("drm/bridge: Add tc358768 driver")
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Tested-by: Maxim Schwalm <maxim.schwalm@gmail.com> # Asus TF700T
Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230906-tc358768-v4-2-31725f008a50@ideasonboard.com
|
|
Analogix ANX78XX driver is missing definitions for anx7816.
It uses the same I2C register set as anx7818.
Signed-off-by: Alicja Michalska <ahplka19@gmail.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/ZPvagaXnQ/TlNEkJ@tora
|
|
Add handling of arbitration lost event.
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230909144432.34972-1-jernej.skrabec@gmail.com
|
|
The drm stack does not expect error valued pointers for EDID anywhere.
Fixes: e66856508746 ("drm: bridge: it66121: Set DDC preamble only once before reading EDID")
Cc: Paul Cercueil <paul@crapouillou.net>
Cc: Robert Foss <robert.foss@linaro.org>
Cc: Phong LE <ple@baylibre.com>
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Robert Foss <rfoss@kernel.org>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Jernej Skrabec <jernej.skrabec@gmail.com>
Cc: <stable@vger.kernel.org> # v6.3+
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20230914131159.2472513-1-jani.nikula@intel.com
|
|
Having conditional around the of_node pointers turns out to make driver
code use ugly #ifdef and #if blocks. So drop the conditionals.
Suggested-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230831080938.47454-4-biju.das.jz@bp.renesas.com
|
|
The driver has an ID table, but it uses the wrong API for retrieving match
data and that will lead to a crash, if it is instantiated by user space or
using ID. From this, there is no user for the ID table and let's drop it
from the driver as it saves some memory.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230831080938.47454-2-biju.das.jz@bp.renesas.com
|
|
The driver does not call drm_bridge_attach(), which causes the next
bridge to not be added to the bridge chain. This causes the pipeline
init to fail when DRM_BRIDGE_ATTACH_NO_CONNECTOR is used.
Add the call to drm_bridge_attach().
Fixes: 30e2ae943c26 ("drm/bridge: Introduce LT8912B DSI to HDMI bridge")
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230804-lt8912b-v1-4-c542692c6a2f@ideasonboard.com
|
|
lt8912b only calls drm_bridge_hpd_enable() if it creates a connector and
the next bridge has DRM_BRIDGE_OP_HPD set. However, when calling
drm_bridge_hpd_disable() it misses checking if a connector was created,
calling drm_bridge_hpd_disable() even if HPD was never enabled. I don't
see any issues caused by this wrong call, though.
Add the check to avoid wrongly calling drm_bridge_hpd_disable().
Fixes: 3b0a01a6a522 ("drm/bridge: lt8912b: Add hot plug detection")
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230804-lt8912b-v1-3-c542692c6a2f@ideasonboard.com
|
