summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/bridge
AgeCommit message (Collapse)AuthorFilesLines
2023-03-11drm/bridge: megachips: Fix error handling in i2c_register_driver()Yuan Can1-1/+5
[ Upstream commit 4ecff954c370b82bce45bdca2846c5c5563e8a8a ] A problem about insmod megachips-stdpxxxx-ge-b850v3-fw.ko failed is triggered with the following log given: [ 4497.981497] Error: Driver 'stdp4028-ge-b850v3-fw' is already registered, aborting... insmod: ERROR: could not insert module megachips-stdpxxxx-ge-b850v3-fw.ko: Device or resource busy The reason is that stdpxxxx_ge_b850v3_init() returns i2c_add_driver() directly without checking its return value, if i2c_add_driver() failed, it returns without calling i2c_del_driver() on the previous i2c driver, resulting the megachips-stdpxxxx-ge-b850v3-fw can never be installed later. A simple call graph is shown as below: stdpxxxx_ge_b850v3_init() i2c_add_driver(&stdp4028_ge_b850v3_fw_driver) i2c_add_driver(&stdp2690_ge_b850v3_fw_driver) i2c_register_driver() driver_register() bus_add_driver() priv = kzalloc(...) # OOM happened # return without delete stdp4028_ge_b850v3_fw_driver Fix by calling i2c_del_driver() on stdp4028_ge_b850v3_fw_driver when i2c_add_driver() returns error. Fixes: fcfa0ddc18ed ("drm/bridge: Drivers for megachips-stdpxxxx-ge-b850v3-fw (LVDS-DP++)") Signed-off-by: Yuan Can <yuancan@huawei.com> Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com> Tested-by: Ian Ray <ian.ray@ge.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20221108091226.114524-1-yuancan@huawei.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-14drm/bridge: ti-sn65dsi86: Fix output polarity setting bugQiqi Zhang1-2/+2
[ Upstream commit 8c115864501fc09932cdfec53d9ec1cde82b4a28 ] According to the description in ti-sn65dsi86's datasheet: CHA_HSYNC_POLARITY: 0 = Active High Pulse. Synchronization signal is high for the sync pulse width. (default) 1 = Active Low Pulse. Synchronization signal is low for the sync pulse width. CHA_VSYNC_POLARITY: 0 = Active High Pulse. Synchronization signal is high for the sync pulse width. (Default) 1 = Active Low Pulse. Synchronization signal is low for the sync pulse width. We should only set these bits when the polarity is negative. Fixes: a095f15c00e2 ("drm/bridge: add support for sn65dsi86 bridge driver") Signed-off-by: Qiqi Zhang <eddy.zhang@rock-chips.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Tested-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20221125104558.84616-1-eddy.zhang@rock-chips.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-10-26drm/bridge: megachips: Fix a null pointer dereference bugZheyu Ma1-1/+3
[ Upstream commit 1ff673333d46d2c1b053ebd0c1c7c7c79e36943e ] When removing the module we will get the following warning: [ 31.911505] i2c-core: driver [stdp2690-ge-b850v3-fw] unregistered [ 31.912484] general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] PREEMPT SMP KASAN PTI [ 31.913338] KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] [ 31.915280] RIP: 0010:drm_bridge_remove+0x97/0x130 [ 31.921825] Call Trace: [ 31.922533] stdp4028_ge_b850v3_fw_remove+0x34/0x60 [megachips_stdpxxxx_ge_b850v3_fw] [ 31.923139] i2c_device_remove+0x181/0x1f0 The two bridges (stdp2690, stdp4028) do not probe at the same time, so the driver does not call ge_b850v3_resgiter() when probing, causing the driver to try to remove the object that has not been initialized. Fix this by checking whether both the bridges are probed. Fixes: 11632d4aa2b3 ("drm/bridge: megachips: Ensure both bridges are probed before registration") Signed-off-by: Zheyu Ma <zheyuma97@gmail.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220830073450.1897020-1-zheyuma97@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-10-26drm: bridge: adv7511: fix CEC power down control register offsetAlvin Šipraga2-6/+3
[ Upstream commit 1d22b6033ea113a4c3850dfa2c0770885c81aec8 ] The ADV7511_REG_CEC_CTRL = 0xE2 register is part of the main register map - not the CEC register map. As such, we shouldn't apply an offset to the register address. Doing so will cause us to address a bogus register for chips with a CEC register map offset (e.g. ADV7533). Fixes: 3b1b975003e4 ("drm: adv7511/33: add HDMI CEC support") Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk> Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220612144854.2223873-2-alvin@pqrs.dk Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-10-05Revert "drm: bridge: analogix/dp: add panel prepare/unprepare in ↵Brian Norris1-13/+0
suspend/resume time" [ Upstream commit cc62d98bd56d45de4531844ca23913a15136c05b ] This reverts commit 211f276ed3d96e964d2d1106a198c7f4a4b3f4c0. For quite some time, core DRM helpers already ensure that any relevant connectors/CRTCs/etc. are disabled, as well as their associated components (e.g., bridges) when suspending the system. Thus, analogix_dp_bridge_{enable,disable}() already get called, which in turn call drm_panel_{prepare,unprepare}(). This makes these drm_panel_*() calls redundant. Besides redundancy, there are a few problems with this handling: (1) drm_panel_{prepare,unprepare}() are *not* reference-counted APIs and are not in general designed to be handled by multiple callers -- although some panel drivers have a coarse 'prepared' flag that mitigates some damage, at least. So at a minimum this is redundant and confusing, but in some cases, this could be actively harmful. (2) The error-handling is a bit non-standard. We ignored errors in suspend(), but handled errors in resume(). And recently, people noticed that the clk handling is unbalanced in error paths, and getting *that* right is not actually trivial, given the current way errors are mostly ignored. (3) In the particular way analogix_dp_{suspend,resume}() get used (e.g., in rockchip_dp_*(), as a late/early callback), we don't necessarily have a proper PM relationship between the DP/bridge device and the panel device. So while the DP bridge gets resumed, the panel's parent device (e.g., platform_device) may still be suspended, and so any prepare() calls may fail. So remove the superfluous, possibly-harmful suspend()/resume() handling of panel state. Fixes: 211f276ed3d9 ("drm: bridge: analogix/dp: add panel prepare/unprepare in suspend/resume time") Link: https://lore.kernel.org/all/Yv2CPBD3Picg%2FgVe@google.com/ Signed-off-by: Brian Norris <briannorris@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220822180729.1.I8ac5abe3a4c1c6fd5c061686c6e883c22f69022c@changeid Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-25drm: bridge: sii8620: fix possible off-by-oneHangyu Hua1-2/+2
[ Upstream commit 21779cc21c732c5eff8ea1624be6590450baa30f ] The next call to sii8620_burst_get_tx_buf will result in off-by-one When ctx->burst.tx_count + size == ARRAY_SIZE(ctx->burst.tx_buf). The same thing happens in sii8620_burst_get_rx_buf. This patch also change tx_count and tx_buf to rx_count and rx_buf in sii8620_burst_get_rx_buf. It is unreasonable to check tx_buf's size and use rx_buf. Fixes: e19e9c692f81 ("drm/bridge/sii8620: add support for burst eMSC transmissions") Signed-off-by: Hangyu Hua <hbh25y@gmail.com> Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220518065856.18936-1-hbh25y@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-25drm: bridge: adv7511: Add check for mipi_dsi_driver_registerJiasheng Jiang1-3/+14
[ Upstream commit 831463667b5f4f1e5bce9c3b94e9e794d2bc8923 ] As mipi_dsi_driver_register could return error if fails, it should be better to check the return value and return error if fails. Moreover, if i2c_add_driver fails, mipi_dsi_driver_register should be reverted. Fixes: 1e4d58cd7f88 ("drm/bridge: adv7533: Create a MIPI DSI device") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220602103401.2980938-1-jiasheng@iscas.ac.cn Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-25drm: adv7511: override i2c address of cec before accessing itAntonio Borneo1-3/+4
[ Upstream commit 9cc4853e4781bf0dd0f35355dc92d97c9da02f5d ] Commit 680532c50bca ("drm: adv7511: Add support for i2c_new_secondary_device") allows a device tree node to override the default addresses of the secondary i2c devices. This is useful for solving address conflicts on the i2c bus. In adv7511_init_cec_regmap() the new i2c address of cec device is read from device tree and immediately accessed, well before it is written in the proper register to override the default address. This can cause an i2c error during probe and a consequent probe failure. Once the new i2c address is read from the device tree, override the default address before any attempt to access the cec. Tested with adv7533 and stm32mp157f. Signed-off-by: Antonio Borneo <antonio.borneo@foss.st.com> Fixes: 680532c50bca ("drm: adv7511: Add support for i2c_new_secondary_device") Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220607213144.427177-1-antonio.borneo@foss.st.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-06-14drm/bridge: analogix_dp: Grab runtime PM reference for DP-AUXBrian Norris1-1/+12
commit 8fb6c44fe8468f92ac7b8bbfcca4404a4e88645f upstream. If the display is not enable()d, then we aren't holding a runtime PM reference here. Thus, it's easy to accidentally cause a hang, if user space is poking around at /dev/drm_dp_aux0 at the "wrong" time. Let's get a runtime PM reference, and check that we "see" the panel. Don't force any panel power-up, etc., because that can be intrusive, and that's not what other drivers do (see drivers/gpu/drm/bridge/ti-sn65dsi86.c and drivers/gpu/drm/bridge/parade-ps8640.c.) Fixes: 0d97ad03f422 ("drm/bridge: analogix_dp: Remove duplicated code") Cc: <stable@vger.kernel.org> Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com> Signed-off-by: Brian Norris <briannorris@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220301181107.v4.1.I773a08785666ebb236917b0c8e6c05e3de471e75@changeid Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-14drm/bridge: Fix error handling in analogix_dp_probeMiaoqian Lin1-5/+13
[ Upstream commit 9f15930bb2ef9f031d62ffc49629cbae89137733 ] In the error handling path, the clk_prepare_enable() function call should be balanced by a corresponding 'clk_disable_unprepare()' call, as already done in the remove function. Fixes: 3424e3a4f844 ("drm: bridge: analogix/dp: split exynos dp driver to bridge directory") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220420011644.25730-1-linmq006@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-06-14drm/bridge: adv7511: clean up CEC adapter when probe failsLucas Stach1-0/+1
[ Upstream commit 7ed2b0dabf7a22874cb30f8878df239ef638eb53 ] When the probe routine fails we also need to clean up the CEC adapter registered in adv7511_cec_init(). Fixes: 3b1b975003e4 ("drm: adv7511/33: add HDMI CEC support") Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220321104705.2804423-1-l.stach@pengutronix.de Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-15drm/bridge: cdns-dsi: Make sure to to create proper aliases for dtNishanth Menon1-0/+1
[ Upstream commit ffb5c099aaa13ab7f73c29ea6ae26bce8d7575ae ] Add MODULE_DEVICE_TABLE to the device tree table to create required aliases needed for module to be loaded with device tree based platform. Fixes: e19233955d9e ("drm/bridge: Add Cadence DSI driver") Signed-off-by: Nishanth Menon <nm@ti.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210921174059.17946-1-nm@ti.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-15drm/bridge: Add missing pm_runtime_disable() in __dw_mipi_dsi_probeMiaoqian Lin1-0/+1
[ Upstream commit 96211b7c56b109a52768e6cc5e23a1f79316eca0 ] If the probe fails, we should use pm_runtime_disable() to balance pm_runtime_enable(). Add missing pm_runtime_disable() for __dw_mipi_dsi_probe. Fixes: 46fc51546d44 ("drm/bridge/synopsys: Add MIPI DSI host controller bridge") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220105104113.31415-1-linmq006@gmail.com Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-15drm/bridge: Fix free wrong object in sii8620_init_rcp_input_devMiaoqian Lin1-1/+1
[ Upstream commit 7c442e76c06cb1bef16a6c523487438175584eea ] rc_dev is allocated by rc_allocate_device(), and doesn't assigned to ctx->rc_dev before calling rc_free_device(ctx->rc_dev). So it should call rc_free_device(rc_dev); Fixes: e25f1f7c94e1 ("drm/bridge/sii8620: add remote control support") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20211227092522.21755-1-linmq006@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27drm/bridge: analogix_dp: Make PSR-exit block lessBrian Norris1-2/+12
commit c4c6ef229593366ab593d4d424addc7025b54a76 upstream. Prior to commit 6c836d965bad ("drm/rockchip: Use the helpers for PSR"), "PSR exit" used non-blocking analogix_dp_send_psr_spd(). The refactor started using the blocking variant, for a variety of reasons -- quoting Sean Paul's potentially-faulty memory: """ - To avoid racing a subsequent PSR entry (if exit takes a long time) - To avoid racing disable/modeset - We're not displaying new content while exiting PSR anyways, so there is minimal utility in allowing frames to be submitted - We're lying to userspace telling them frames are on the screen when we're just dropping them on the floor """ However, I'm finding that this blocking transition is causing upwards of 60+ ms of unneeded latency on PSR-exit, to the point that initial cursor movements when leaving PSR are unbearably jumpy. It turns out that we need to meet in the middle somewhere: Sean is right that we were "lying to userspace" with a non-blocking PSR-exit, but the new blocking behavior is also waiting too long: According to the eDP specification, the sink device must support PSR entry transitions from both state 4 (ACTIVE_RESYNC) and state 0 (INACTIVE). It also states that in ACTIVE_RESYNC, "the Sink device must display the incoming active frames from the Source device with no visible glitches and/or artifacts." Thus, for our purposes, we only need to wait for ACTIVE_RESYNC before moving on; we are ready to display video, and subsequent PSR-entry is safe. Tested on a Samsung Chromebook Plus (i.e., Rockchip RK3399 Gru Kevin), where this saves about 60ms of latency, for PSR-exit that used to take about 80ms. Fixes: 6c836d965bad ("drm/rockchip: Use the helpers for PSR") Cc: <stable@vger.kernel.org> Cc: Zain Wang <wzz@rock-chips.com> Cc: Tomasz Figa <tfiga@chromium.org> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Sean Paul <seanpaul@chromium.org> Signed-off-by: Brian Norris <briannorris@chromium.org> Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20211103135112.v3.1.I67612ea073c3306c71b46a87be894f79707082df@changeid Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27drm/bridge: megachips: Ensure both bridges are probed before registrationMartyn Welch1-12/+28
[ Upstream commit 11632d4aa2b3f126790e81a4415d6c23103cf8bb ] In the configuration used by the b850v3, the STDP2690 is used to read EDID data whilst it's the STDP4028 which can detect when monitors are connected. This can result in problems at boot with monitors connected when the STDP4028 is probed first, a monitor is detected and an attempt is made to read the EDID data before the STDP2690 has probed: [ 3.795721] Unable to handle kernel NULL pointer dereference at virtual address 00000018 [ 3.803845] pgd = (ptrval) [ 3.806581] [00000018] *pgd=00000000 [ 3.810180] Internal error: Oops: 5 [#1] SMP ARM [ 3.814813] Modules linked in: [ 3.817879] CPU: 0 PID: 64 Comm: kworker/u4:1 Not tainted 5.15.0 #1 [ 3.824161] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) [ 3.830705] Workqueue: events_unbound deferred_probe_work_func [ 3.836565] PC is at stdp2690_get_edid+0x44/0x19c [ 3.841286] LR is at ge_b850v3_lvds_get_modes+0x2c/0x5c [ 3.846526] pc : [<805eae10>] lr : [<805eb138>] psr: 80000013 [ 3.852802] sp : 81c359d0 ip : 7dbb550b fp : 81c35a1c [ 3.858037] r10: 81c73840 r9 : 81c73894 r8 : 816d9800 [ 3.863270] r7 : 00000000 r6 : 81c34000 r5 : 00000000 r4 : 810c35f0 [ 3.869808] r3 : 80e3e294 r2 : 00000080 r1 : 00000cc0 r0 : 81401180 [ 3.876349] Flags: Nzcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none [ 3.883499] Control: 10c5387d Table: 1000404a DAC: 00000051 [ 3.889254] Register r0 information: slab kmem_cache start 81401180 pointer offset 0 [ 3.897034] Register r1 information: non-paged memory [ 3.902097] Register r2 information: non-paged memory [ 3.907160] Register r3 information: non-slab/vmalloc memory [ 3.912832] Register r4 information: non-slab/vmalloc memory [ 3.918503] Register r5 information: NULL pointer [ 3.923217] Register r6 information: non-slab/vmalloc memory [ 3.928887] Register r7 information: NULL pointer [ 3.933601] Register r8 information: slab kmalloc-1k start 816d9800 pointer offset 0 size 1024 [ 3.942244] Register r9 information: slab kmalloc-2k start 81c73800 pointer offset 148 size 2048 [ 3.951058] Register r10 information: slab kmalloc-2k start 81c73800 pointer offset 64 size 2048 [ 3.959873] Register r11 information: non-slab/vmalloc memory [ 3.965632] Register r12 information: non-paged memory [ 3.970781] Process kworker/u4:1 (pid: 64, stack limit = 0x(ptrval)) [ 3.977148] Stack: (0x81c359d0 to 0x81c36000) [ 3.981517] 59c0: 80b2b668 80b2b5bc 000002e2 0000034e [ 3.989712] 59e0: 81c35a8c 816d98e8 81c35a14 7dbb550b 805bfcd0 810c35f0 81c73840 824addc0 [ 3.997906] 5a00: 00001000 816d9800 81c73894 81c73840 81c35a34 81c35a20 805eb138 805eadd8 [ 4.006099] 5a20: 810c35f0 00000045 81c35adc 81c35a38 80594188 805eb118 80d7c788 80dd1848 [ 4.014292] 5a40: 00000000 81c35a50 80dca950 811194d3 80dca7c4 80dca944 80dca91c 816d9800 [ 4.022485] 5a60: 81c34000 81c760a8 816d9800 80c58c98 810c35f0 816d98e8 00001000 00001000 [ 4.030678] 5a80: 00000000 00000000 8017712c 81c60000 00000002 00000001 00000000 00000000 [ 4.038870] 5aa0: 816d9900 816d9900 00000000 7dbb550b 805c700c 00000008 826282c8 826282c8 [ 4.047062] 5ac0: 00001000 81e1ce40 00001000 00000002 81c35bf4 81c35ae0 805d9694 80593fc0 [ 4.055255] 5ae0: 8017a970 80179ad8 00000179 00000000 81c35bcc 81c35b00 80177108 8017a950 [ 4.063447] 5b00: 00000000 81c35b10 81c34000 00000000 81004fd8 81010a38 00000000 00000059 [ 4.071639] 5b20: 816d98d4 81fbb718 00000013 826282c8 8017a940 81c35b40 81134448 00000400 [ 4.079831] 5b40: 00000178 00000000 e063b9c1 00000000 c2000049 00000040 00000000 00000008 [ 4.088024] 5b60: 82628300 82628380 00000000 00000000 81c34000 00000000 81fbb700 82628340 [ 4.096216] 5b80: 826283c0 00001000 00000000 00000010 816d9800 826282c0 801766f8 00000000 [ 4.104408] 5ba0: 00000000 81004fd8 00000049 00000000 00000000 00000001 80dcf940 80178de4 [ 4.112601] 5bc0: 81c35c0c 7dbb550b 80178de4 81fbb700 00000010 00000010 810c35f4 81e1ce40 [ 4.120793] 5be0: 81c40908 0000000c 81c35c64 81c35bf8 805a7f18 805d94a0 81c35c3c 816d9800 [ 4.128985] 5c00: 00000010 81c34000 81c35c2c 81c35c18 8012fce0 805be90c 81c35c3c 81c35c28 [ 4.137178] 5c20: 805be90c 80173210 81fbb600 81fbb6b4 81c35c5c 7dbb550b 81c35c64 81fbb700 [ 4.145370] 5c40: 816d9800 00000010 810c35f4 81e1ce40 81c40908 0000000c 81c35c84 81c35c68 [ 4.153565] 5c60: 805a8c78 805a7ed0 816d9800 81fbb700 00000010 00000000 81c35cac 81c35c88 [ 4.161758] 5c80: 805a8dc4 805a8b68 816d9800 00000000 816d9800 00000000 8179f810 810c42d0 [ 4.169950] 5ca0: 81c35ccc 81c35cb0 805e47b0 805a8d18 824aa240 81e1ea80 81c40908 81126b60 [ 4.178144] 5cc0: 81c35d14 81c35cd0 8060db1c 805e46cc 81c35d14 81c35ce0 80dd90f8 810c4d58 [ 4.186338] 5ce0: 80dd90dc 81fe9740 fffffffe 81fe9740 81e1ea80 00000000 810c4d6c 80c4b95c [ 4.194531] 5d00: 80dd9a3c 815c6810 81c35d34 81c35d18 8060dc9c 8060d8fc 8246b440 815c6800 [ 4.202724] 5d20: 815c6810 eefd8e00 81c35d44 81c35d38 8060dd80 8060dbec 81c35d6c 81c35d48 [ 4.210918] 5d40: 805e98a4 8060dd70 00000000 815c6810 810c45b0 81126e90 81126e90 80dd9a3c [ 4.219112] 5d60: 81c35d8c 81c35d70 80619574 805e9808 815c6810 00000000 810c45b0 81126e90 [ 4.227305] 5d80: 81c35db4 81c35d90 806168dc 80619514 80625df0 80623c80 815c6810 810c45b0 [ 4.235498] 5da0: 81c35e6c 815c6810 81c35dec 81c35db8 80616d04 80616800 81c35de4 81c35dc8 [ 4.243691] 5dc0: 808382b0 80b2f444 8116e310 8116e314 81c35e6c 815c6810 00000003 80dd9a3c [ 4.251884] 5de0: 81c35e14 81c35df0 80616ec8 80616c60 00000001 810c45b0 81c35e6c 815c6810 [ 4.260076] 5e00: 00000001 80dd9a3c 81c35e34 81c35e18 80617338 80616e90 00000000 81c35e6c [ 4.268269] 5e20: 80617284 81c34000 81c35e64 81c35e38 80614730 80617290 81c35e64 8171a06c [ 4.276461] 5e40: 81e220b8 7dbb550b 815c6810 81c34000 815c6854 81126e90 81c35e9c 81c35e68 [ 4.284654] 5e60: 8061673c 806146a8 8060f5e0 815c6810 00000001 7dbb550b 00000000 810c5080 [ 4.292847] 5e80: 810c5320 815c6810 81126e90 00000000 81c35eac 81c35ea0 80617554 80616650 [ 4.301040] 5ea0: 81c35ecc 81c35eb0 80615694 80617544 810c5080 810c5080 810c5094 81126e90 [ 4.309233] 5ec0: 81c35efc 81c35ed0 80615c6c 8061560c 80615bc0 810c50c0 817eeb00 81412800 [ 4.317425] 5ee0: 814c3000 00000000 814c300d 81119a60 81c35f3c 81c35f00 80141488 80615bcc [ 4.325618] 5f00: 81c60000 81c34000 81c35f24 81c35f18 80143078 817eeb00 81412800 817eeb18 [ 4.333811] 5f20: 81412818 81003d00 00000088 81412800 81c35f74 81c35f40 80141a48 80141298 [ 4.342005] 5f40: 81c35f74 81c34000 801481ac 817efa40 817efc00 801417d8 817eeb00 00000000 [ 4.350199] 5f60: 815a7e7c 81c34000 81c35fac 81c35f78 80149b1c 801417e4 817efc20 817efc20 [ 4.358391] 5f80: ffffe000 817efa40 801499a8 00000000 00000000 00000000 00000000 00000000 [ 4.366583] 5fa0: 00000000 81c35fb0 80100130 801499b4 00000000 00000000 00000000 00000000 [ 4.374774] 5fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 4.382966] 5fe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000 [ 4.391155] Backtrace: [ 4.393613] [<805eadcc>] (stdp2690_get_edid) from [<805eb138>] (ge_b850v3_lvds_get_modes+0x2c/0x5c) [ 4.402691] r10:81c73840 r9:81c73894 r8:816d9800 r7:00001000 r6:824addc0 r5:81c73840 [ 4.410534] r4:810c35f0 [ 4.413073] [<805eb10c>] (ge_b850v3_lvds_get_modes) from [<80594188>] (drm_helper_probe_single_connector_modes+0x1d4/0x84c) [ 4.424240] r5:00000045 r4:810c35f0 [ 4.427822] [<80593fb4>] (drm_helper_probe_single_connector_modes) from [<805d9694>] (drm_client_modeset_probe+0x200/0x1384) [ 4.439074] r10:00000002 r9:00001000 r8:81e1ce40 r7:00001000 r6:826282c8 r5:826282c8 [ 4.446917] r4:00000008 [ 4.449455] [<805d9494>] (drm_client_modeset_probe) from [<805a7f18>] (__drm_fb_helper_initial_config_and_unlock+0x54/0x5b4) [ 4.460713] r10:0000000c r9:81c40908 r8:81e1ce40 r7:810c35f4 r6:00000010 r5:00000010 [ 4.468556] r4:81fbb700 [ 4.471095] [<805a7ec4>] (__drm_fb_helper_initial_config_and_unlock) from [<805a8c78>] (drm_fbdev_client_hotplug+0x11c/0x1b0) [ 4.482434] r10:0000000c r9:81c40908 r8:81e1ce40 r7:810c35f4 r6:00000010 r5:816d9800 [ 4.490276] r4:81fbb700 [ 4.492814] [<805a8b5c>] (drm_fbdev_client_hotplug) from [<805a8dc4>] (drm_fbdev_generic_setup+0xb8/0x1a4) [ 4.502494] r7:00000000 r6:00000010 r5:81fbb700 r4:816d9800 [ 4.508160] [<805a8d0c>] (drm_fbdev_generic_setup) from [<805e47b0>] (imx_drm_bind+0xf0/0x130) [ 4.516805] r7:810c42d0 r6:8179f810 r5:00000000 r4:816d9800 [ 4.522474] [<805e46c0>] (imx_drm_bind) from [<8060db1c>] (try_to_bring_up_master+0x22c/0x2f0) [ 4.531116] r7:81126b60 r6:81c40908 r5:81e1ea80 r4:824aa240 [ 4.536783] [<8060d8f0>] (try_to_bring_up_master) from [<8060dc9c>] (__component_add+0xbc/0x184) [ 4.545597] r10:815c6810 r9:80dd9a3c r8:80c4b95c r7:810c4d6c r6:00000000 r5:81e1ea80 [ 4.553440] r4:81fe9740 [ 4.555980] [<8060dbe0>] (__component_add) from [<8060dd80>] (component_add+0x1c/0x20) [ 4.563921] r7:eefd8e00 r6:815c6810 r5:815c6800 r4:8246b440 [ 4.569589] [<8060dd64>] (component_add) from [<805e98a4>] (dw_hdmi_imx_probe+0xa8/0xe8) [ 4.577702] [<805e97fc>] (dw_hdmi_imx_probe) from [<80619574>] (platform_probe+0x6c/0xc8) [ 4.585908] r9:80dd9a3c r8:81126e90 r7:81126e90 r6:810c45b0 r5:815c6810 r4:00000000 [ 4.593662] [<80619508>] (platform_probe) from [<806168dc>] (really_probe+0xe8/0x460) [ 4.601524] r7:81126e90 r6:810c45b0 r5:00000000 r4:815c6810 [ 4.607191] [<806167f4>] (really_probe) from [<80616d04>] (__driver_probe_device+0xb0/0x230) [ 4.615658] r7:815c6810 r6:81c35e6c r5:810c45b0 r4:815c6810 [ 4.621326] [<80616c54>] (__driver_probe_device) from [<80616ec8>] (driver_probe_device+0x44/0xe0) [ 4.630313] r9:80dd9a3c r8:00000003 r7:815c6810 r6:81c35e6c r5:8116e314 r4:8116e310 [ 4.638068] [<80616e84>] (driver_probe_device) from [<80617338>] (__device_attach_driver+0xb4/0x12c) [ 4.647227] r9:80dd9a3c r8:00000001 r7:815c6810 r6:81c35e6c r5:810c45b0 r4:00000001 [ 4.654981] [<80617284>] (__device_attach_driver) from [<80614730>] (bus_for_each_drv+0x94/0xd8) [ 4.663794] r7:81c34000 r6:80617284 r5:81c35e6c r4:00000000 [ 4.669461] [<8061469c>] (bus_for_each_drv) from [<8061673c>] (__device_attach+0xf8/0x190) [ 4.677753] r7:81126e90 r6:815c6854 r5:81c34000 r4:815c6810 [ 4.683419] [<80616644>] (__device_attach) from [<80617554>] (device_initial_probe+0x1c/0x20) [ 4.691971] r8:00000000 r7:81126e90 r6:815c6810 r5:810c5320 r4:810c5080 [ 4.698681] [<80617538>] (device_initial_probe) from [<80615694>] (bus_probe_device+0x94/0x9c) [ 4.707318] [<80615600>] (bus_probe_device) from [<80615c6c>] (deferred_probe_work_func+0xac/0xf0) [ 4.716305] r7:81126e90 r6:810c5094 r5:810c5080 r4:810c5080 [ 4.721973] [<80615bc0>] (deferred_probe_work_func) from [<80141488>] (process_one_work+0x1fc/0x54c) [ 4.731139] r10:81119a60 r9:814c300d r8:00000000 r7:814c3000 r6:81412800 r5:817eeb00 [ 4.738981] r4:810c50c0 r3:80615bc0 [ 4.742563] [<8014128c>] (process_one_work) from [<80141a48>] (worker_thread+0x270/0x570) [ 4.750765] r10:81412800 r9:00000088 r8:81003d00 r7:81412818 r6:817eeb18 r5:81412800 [ 4.758608] r4:817eeb00 [ 4.761147] [<801417d8>] (worker_thread) from [<80149b1c>] (kthread+0x174/0x190) [ 4.768574] r10:81c34000 r9:815a7e7c r8:00000000 r7:817eeb00 r6:801417d8 r5:817efc00 [ 4.776417] r4:817efa40 [ 4.778955] [<801499a8>] (kthread) from [<80100130>] (ret_from_fork+0x14/0x24) [ 4.786201] Exception stack(0x81c35fb0 to 0x81c35ff8) [ 4.791266] 5fa0: 00000000 00000000 00000000 00000000 [ 4.799459] 5fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 4.807651] 5fe0: 00000000 00000000 00000000 00000000 00000013 00000000 [ 4.814279] r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:801499a8 [ 4.822120] r4:817efa40 [ 4.824664] Code: e3a02080 e593001c e3a01d33 e3a05000 (e5979018) Split the registration from the STDP4028 probe routine and only perform registration once both the STDP4028 and STDP2690 have probed. Signed-off-by: Martyn Welch <martyn.welch@collabora.com> CC: Peter Senna Tschudin <peter.senna@gmail.com> CC: Martyn Welch <martyn.welch@collabora.co.uk> CC: Neil Armstrong <narmstrong@baylibre.com> CC: Robert Foss <robert.foss@linaro.org> CC: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> CC: Jonas Karlman <jonas@kwiboo.se> CC: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/43552c3404e8fdf92d8bc5658fac24e9f03c2c57.1637836606.git.martyn.welch@collabora.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27drm/bridge: ti-sn65dsi86: Set max register for regmapStephen Boyd1-0/+1
[ Upstream commit 0b665d4af35837f0a0ae63135b84a3c187c1db3b ] Set the maximum register to 0xff so we can dump the registers for this device in debugfs. Fixes: a095f15c00e2 ("drm/bridge: add support for sn65dsi86 bridge driver") Cc: Rob Clark <robdclark@chromium.org> Cc: Douglas Anderson <dianders@chromium.org> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20211215002529.382383-1-swboyd@chromium.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-19drm/bridge: cdns: Fix PM reference leak in cdns_dsi_transfer()Zou Wei1-1/+1
[ Upstream commit 33f90f27e1c5ccd648d3e78a1c28be9ee8791cf1 ] pm_runtime_get_sync will increment pm usage counter even it failed. Forgetting to putting operation will result in reference leak here. Fix it by replacing it with pm_runtime_resume_and_get to keep usage counter balanced. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zou Wei <zou_wei@huawei.com> Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/1621840862-106024-1-git-send-email-zou_wei@huawei.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-11-05drm/bridge/synopsys: dsi: add support for non-continuous HS clockAntonio Borneo1-2/+7
[ Upstream commit c6d94e37bdbb6dfe7e581e937a915ab58399b8a5 ] Current code enables the HS clock when video mode is started or to send out a HS command, and disables the HS clock to send out a LP command. This is not what DSI spec specify. Enable HS clock either in command and in video mode. Set automatic HS clock management for panels and devices that support non-continuous HS clock. Signed-off-by: Antonio Borneo <antonio.borneo@st.com> Tested-by: Philippe Cornu <philippe.cornu@st.com> Reviewed-by: Philippe Cornu <philippe.cornu@st.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200701194234.18123-1-yannick.fertre@st.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-11-05drm/brige/megachips: Add checking if ge_b850v3_lvds_init() is working correctlyNadezda Lutovinova1-2/+10
[ Upstream commit f688a345f0d7a6df4dd2aeca8e4f3c05e123a0ee ] If ge_b850v3_lvds_init() does not allocate memory for ge_b850v3_lvds_ptr, then a null pointer dereference is accessed. The patch adds checking of the return value of ge_b850v3_lvds_init(). Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Nadezda Lutovinova <lutovinova@ispras.ru> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200819143756.30626-1-lutovinova@ispras.ru Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-19drm/bridge: sil_sii8620: initialize return of sii8620_readbTom Rix1-1/+1
[ Upstream commit 02cd2d3144653e6e2a0c7ccaa73311e48e2dc686 ] clang static analysis flags this error sil-sii8620.c:184:2: warning: Undefined or garbage value returned to caller [core.uninitialized.UndefReturn] return ret; ^~~~~~~~~~ sii8620_readb calls sii8620_read_buf. sii8620_read_buf can return without setting its output pararmeter 'ret'. So initialize ret. Fixes: ce6e153f414a ("drm/bridge: add Silicon Image SiI8620 driver") Signed-off-by: Tom Rix <trix@redhat.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200712152453.27510-1-trix@redhat.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-19drm/bridge: ti-sn65dsi86: Clear old error bits before AUX transfersDouglas Anderson1-0/+6
[ Upstream commit baef4d56195b6d6e0f681f6eac03d8c6db011d34 ] The AUX channel transfer error bits in the status register are latched and need to be cleared. Clear them before doing our transfer so we don't see old bits and get confused. Without this patch having a single failure would mean that all future transfers would look like they failed. Fixes: b814ec6d4535 ("drm/bridge: ti-sn65dsi86: Implement AUX channel") Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200508163314.1.Idfa69d5d3fc9623083c0ff78572fea87dccb199c@changeid Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-22drm: bridge: adv7511: Extend list of audio sample ratesBogdan Togorean1-5/+7
[ Upstream commit b97b6a1f6e14a25d1e1ca2a46c5fa3e2ca374e22 ] ADV7511 support sample rates up to 192kHz. CTS and N parameters should be computed accordingly so this commit extend the list up to maximum supported sample rate. Signed-off-by: Bogdan Togorean <bogdan.togorean@analog.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200413113513.86091-2-bogdan.togorean@analog.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-05-10drm/bridge: analogix_dp: Split bind() into probe() and real bind()Marek Szyprowski1-11/+22
[ Upstream commit 83a196773b8bc6702f49df1eddc848180e350340 ] Analogix_dp driver acquires all its resources in the ->bind() callback, what is a bit against the component driver based approach, where the driver initialization is split into a probe(), where all resources are gathered, and a bind(), where all objects are created and a compound driver is initialized. Extract all the resource related operations to analogix_dp_probe() and analogix_dp_remove(), then call them before/after registration of the device components from the main Exynos DP and Rockchip DP drivers. Also move the plat_data initialization to the probe() to make it available for the analogix_dp_probe() function. This fixes the multiple calls to the bind() of the DRM compound driver when the DP PHY driver is not yet loaded/probed: [drm] Exynos DRM: using 14400000.fimd device for DMA mapping operations exynos-drm exynos-drm: bound 14400000.fimd (ops fimd_component_ops [exynosdrm]) exynos-drm exynos-drm: bound 14450000.mixer (ops mixer_component_ops [exynosdrm]) exynos-dp 145b0000.dp-controller: no DP phy configured exynos-drm exynos-drm: failed to bind 145b0000.dp-controller (ops exynos_dp_ops [exynosdrm]): -517 exynos-drm exynos-drm: master bind failed: -517 ... [drm] Exynos DRM: using 14400000.fimd device for DMA mapping operations exynos-drm exynos-drm: bound 14400000.fimd (ops hdmi_enable [exynosdrm]) exynos-drm exynos-drm: bound 14450000.mixer (ops hdmi_enable [exynosdrm]) exynos-drm exynos-drm: bound 145b0000.dp-controller (ops hdmi_enable [exynosdrm]) exynos-drm exynos-drm: bound 14530000.hdmi (ops hdmi_enable [exynosdrm]) [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). Console: switching to colour frame buffer device 170x48 exynos-drm exynos-drm: fb0: exynosdrmfb frame buffer device [drm] Initialized exynos 1.1.0 20180330 for exynos-drm on minor 1 ... Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Andy Yan <andy.yan@rock-chips.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200310103427.26048-1-m.szyprowski@samsung.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-03-25drm/bridge: dw-hdmi: fix AVI frame colorimetryJernej Skrabec1-20/+26
commit e8dca30f7118461d47e1c3510d0e31b277439151 upstream. CTA-861-F explicitly states that for RGB colorspace colorimetry should be set to "none". Fix that. Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Fixes: def23aa7e982 ("drm: bridge: dw-hdmi: Switch to V4L bus format and encodings") Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Link: https://patchwork.freedesktop.org/patch/msgid/20200304232512.51616-2-jernej.skrabec@siol.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-28drm/bridge: tc358767: fix poll timeoutsTomi Valkeinen1-4/+4
commit 8a6483ac634acda3f599f50082c652d2d37199c7 upstream. Link training fails with: Link training timeout waiting for LT_LOOPDONE! main link enable error: -110 This is caused by too tight timeouts, which were changed recently in aa92213f388b ("drm/bridge: tc358767: Simplify polling in tc_link_training()"). With a quick glance, the commit does not change the timeouts. However, the method of delaying/sleeping is different, and as the timeout in the previous implementation was not explicit, the new version in practice has much tighter timeout. The same change was made to other parts in the driver, but the link training timeout is the only one I have seen causing issues. Nevertheless, 1 us sleep is not very sane, and the timeouts look pretty tight, so lets fix all the timeouts. One exception was the aux busy poll, where the poll sleep was much longer than necessary (or optimal). I measured the times on my setup, and now the sleep times are set to such values that they result in multiple loops, but not too many (say, 5-10 loops). The timeouts were all increased to 100ms, which should be more than enough for all of these, but in case of bad errors, shouldn't stop the driver as multi-second timeouts could do. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Fixes: aa92213f388b ("drm/bridge: tc358767: Simplify polling in tc_link_training()") Tested-by: Andrey Smirnov <andrew.smirnov@gmail.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191209082707.24531-1-tomi.valkeinen@ti.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-31drm/bridge: dw-hdmi: Restore audio when setting a modeDaniel Kurtz1-1/+1
[ Upstream commit fadfee3f9d8f114435a8a3e9f83a227600d89de7 ] When setting a new display mode, dw_hdmi_setup() calls dw_hdmi_enable_video_path(), which disables all hdmi clocks, including the audio clock. We should only (re-)enable the audio clock if audio was already enabled when setting the new mode. Without this patch, on RK3288, there will be HDMI audio on some monitors if i2s was played to headphone when the monitor was plugged. ACER H277HU and ASUS PB278 are two of the monitors showing this issue. Signed-off-by: Cheng-Yi Chiang <cychiang@chromium.org> Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Signed-off-by: Yakir Yang <ykk@rock-chips.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191008102145.55134-1-cychiang@chromium.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-31drm/bridge: dw-hdmi: Refuse DDC/CI transfers on the internal I2C controllerMatthias Kaehlcke1-0/+10
[ Upstream commit bee447e224b2645911c5d06e35dc90d8433fcef6 ] The DDC/CI protocol involves sending a multi-byte request to the display via I2C, which is typically followed by a multi-byte response. The internal I2C controller only allows single byte reads/writes or reads of 8 sequential bytes, hence DDC/CI is not supported when the internal I2C controller is used. The I2C transfers complete without errors, however the data in the response is garbage. Abort transfers to/from slave address 0x37 (DDC) with -EOPNOTSUPP, to make it evident that the communication is failing. Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Sean Paul <sean@poorly.run> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191002124354.v2.1.I709dfec496f5f0b44a7b61dcd4937924da8d8382@changeid Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-31drm/bridge: analogix-anx78xx: silence -EPROBE_DEFER warningsBrian Masney1-2/+6
[ Upstream commit 2708e876272d89bbbff811d12834adbeef85f022 ] Silence two warning messages that occur due to -EPROBE_DEFER errors to help cleanup the system boot log. Signed-off-by: Brian Masney <masneyb@onstation.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190815004854.19860-4-masneyb@onstation.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-10-10drm/bridge: tc358767: fix max_tu_symbol valueTomi Valkeinen1-1/+6
max_tu_symbol was programmed to TU_SIZE_RECOMMENDED - 1, which is not what the spec says. The spec says: roundup ((input active video bandwidth in bytes/output active video bandwidth in bytes) * tu_size) It is not quite clear what the above means, but calculating max_tu_symbol = (input Bps / output Bps) * tu_size seems to work and fixes the issues seen. This fixes artifacts in some videomodes (e.g. 1024x768@60 on 2-lanes & 1.62Gbps was pretty bad for me). Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Tested-by: Jyri Sarha <jsarha@ti.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190924131702.9988-1-tomi.valkeinen@ti.com
2019-09-27Merge tag 'drm-next-2019-09-27' of git://anongit.freedesktop.org/drm/drmLinus Torvalds1-9/+3
Pull drm fixes from Dave Airlie: "Fixes built up over the past 1.5 weeks or so, it's two weeks of amdgpu, some core cleanups and some panfrost fixes. I also finally figured out why my desktop was slow to do a bunch of stuff (someone gave it an IPv6 address which can't reach anything!). core: - Some cleanups and fixes in the self-refresh helpers - Some cleanups and fixes in the atomic helpers amdgpu: - Fix a 64 bit divide - Prevent a memory leak in a failure case in dc - Load proper gfx firmware on navi14 variants - Add more navi12 and navi14 PCI ids - Misc fixes for renoir - Fix bandwidth issues with multiple displays on vega20 - Support for Dali - Fix a possible oops with KFD on hawaii - Fix for backlight level after resume on some APUs - Other misc fixes panfrost: - Multiple panfrost fixes for regulator support and page fault handling" * tag 'drm-next-2019-09-27' of git://anongit.freedesktop.org/drm/drm: (34 commits) drm/amd/display: prevent memory leak drm/amdgpu/gfx10: add support for wks firmware loading drm/amdgpu/display: include slab.h in dcn21_resource.c drm/amdgpu/display: fix 64 bit divide drm/panfrost: Prevent race when handling page fault drm/panfrost: Remove NULL checks for regulator drm/panfrost: Fix regulator_get_optional() misuse drm: Measure Self Refresh Entry/Exit times to avoid thrashing drm: Fix kerneldoc and remove unused struct member in self_refresh helper drm/atomic: Rename crtc_state->pageflip_flags to async_flip drm/atomic: Reject FLIP_ASYNC unconditionally drm/atomic: Take the atomic toys away from X drm/amdgpu: flag navi12 and 14 as experimental for 5.4 drm/kms: Duct-tape for mode object lifetime checks drm/amdgpu: add navi12 pci id drm/amdgpu: add navi14 PCI ID for work station SKU drm/amdkfd: Swap trap temporary registers in gfx10 trap handler drm/amd/powerplay: implement sysfs for getting dpm clock drm/amd/display: Restore backlight brightness after system resume drm/amd/display: Implement voltage limitation for dali ...
2019-09-25Merge branch 'i2c/for-5.4' of ↵Linus Torvalds1-9/+9
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: - new driver for ICY, an Amiga Zorro card :) - axxia driver gained slave mode support, NXP driver gained ACPI - the slave EEPROM backend gained 16 bit address support - and lots of regular driver updates and reworks * 'i2c/for-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (52 commits) i2c: tegra: Move suspend handling to NOIRQ phase i2c: imx: ACPI support for NXP i2c controller i2c: uniphier(-f): remove all dev_dbg() i2c: uniphier(-f): use devm_platform_ioremap_resource() i2c: slave-eeprom: Add comment about address handling i2c: exynos5: Remove IRQF_ONESHOT i2c: stm32f7: Make structure stm32f7_i2c_algo constant i2c: cht-wc: drop check because i2c_unregister_device() is NULL safe i2c-eeprom_slave: Add support for more eeprom models i2c: fsi: Add of_put_node() before break i2c: synquacer: Make synquacer_i2c_ops constant i2c: hix5hd2: Remove IRQF_ONESHOT i2c: i801: Use iTCO version 6 in Cannon Lake PCH and beyond watchdog: iTCO: Add support for Cannon Lake PCH iTCO i2c: iproc: Make bcm_iproc_i2c_quirks constant i2c: iproc: Add full name of devicetree node to adapter name i2c: piix4: Add ACPI support i2c: piix4: Fix probing of reserved ports on AMD Family 16h Model 30h i2c: ocores: use request_any_context_irq() to register IRQ handler i2c: designware: Fix optional reset error handling ...
2019-09-13Revert "drm/bridge: adv7511: Attach to DSI host at probe time"Rob Clark1-9/+3
This reverts commit 83f35bc3a852f1c3892c7474998c5cec707c7ba3. There are at least two DSI controller drivers which relies on the old behaviour of adv7511 driver. To avoid platform breakage this patch should be reverted. This is a temporary solution, as it blocks adv7511 usage with other platforms. Assumption that DSI device driver (bridge/panel) should first expose drm_bridge/drm_panel object, then look for DSI bus is just incorrect - it can work with devices controlled via i2c but it cannot work with devices controlled via DSI - they will not be able to probe. To solve the issue following steps should be performed: - rework reverted patch allowing co-operation with broken DSI controller drivers - with simple/ugly workaround, - fix controller drivers and then remove workaround. Signed-off-by: Rob Clark <robdclark@chromium.org> [a.hajda: changed commit message] Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190829180836.14453-1-robdclark@gmail.com
2019-08-27Merge tag 'drm-misc-next-2019-08-23' of ↵Dave Airlie2-22/+36
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for 5.4: UAPI Changes: Cross-subsystem Changes: Core Changes: - dma-buf: dma-fence selftests Driver Changes: - kirin: Various cleanups and reworks - komeda: Add support for DT memory-regions - meson: Rely on the compatible to detect vpu features - omap: Implement alpha and pixel blend mode properties - panfrost: Implement per-fd address spaces, various fixes - rockchip: DSI DT binding rework - fbdev: Various cleanups Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190823083509.c7mduqdqjnxc7ubb@flea
2019-08-22Merge tag 'du-next-20190816' of git://linuxtv.org/pinchartl/media into drm-nextDave Airlie1-1/+0
- R-Car DU fixes - Misc. DRM cleanups Signed-off-by: Dave Airlie <airlied@redhat.com> From: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190816133500.GJ5020@pendragon.ideasonboard.com
2019-08-21Merge tag 'drm-misc-next-2019-08-19' of ↵Dave Airlie8-36/+115
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for 5.4: UAPI Changes: Cross-subsystem Changes: Core Changes: - dma-buf: add reservation_object_fences helper, relax reservation_object_add_shared_fence, remove reservation_object seq number (and then restored) - dma-fence: Shrinkage of the dma_fence structure, Merge dma_fence_signal and dma_fence_signal_locked, Store the timestamp in struct dma_fence in a union with cb_list Driver Changes: - More dt-bindings YAML conversions - More removal of drmP.h includes - dw-hdmi: Support get_eld and various i2s improvements - gm12u320: Few fixes - meson: Global cleanup - panfrost: Few refactors, Support for GPU heap allocations - sun4i: Support for DDC enable GPIO - New panels: TI nspire, NEC NL8048HL11, LG Philips LB035Q02, Sharp LS037V7DW01, Sony ACX565AKM, Toppoly TD028TTEC1 Toppoly TD043MTEA1 Signed-off-by: Dave Airlie <airlied@redhat.com> [airlied: fixup dma_resv rename fallout] From: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190819141923.7l2adietcr2pioct@flea
2019-08-20dw-hdmi-cec: use cec_notifier_cec_adap_(un)registerDariusz Marcinkiewicz1-7/+6
Use the new cec_notifier_cec_adap_(un)register() functions to (un)register the notifier for the CEC adapter. Also adds CEC_CAP_CONNECTOR_INFO capability to the adapter. Changes since v3: - add CEC_CAP_CONNECTOR_INFO to cec_allocate_adapter, - replace CEC_CAP_LOG_ADDRS | CEC_CAP_TRANSMIT | CEC_CAP_RC | CEC_CAP_PASSTHROUGH with CEC_CAP_DEFAULTS. Signed-off-by: Dariusz Marcinkiewicz <darekm@google.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190814104520.6001-4-darekm@google.com
2019-08-20drm: dw-hdmi: use cec_notifier_conn_(un)registerDariusz Marcinkiewicz1-15/+30
Use the new cec_notifier_conn_(un)register() functions to (un)register the notifier for the HDMI connector, and fill in the cec_connector_info. Changes since v6: - move cec_notifier_conn_unregister to a bridge detach function, - add a mutex protecting a CEC notifier. Changes since v4: - typo fix Changes since v2: - removed unnecessary NULL check before a call to cec_notifier_conn_unregister, - use cec_notifier_phys_addr_invalidate to invalidate physical address. Changes since v1: Add memory barrier to make sure that the notifier becomes visible to the irq thread once it is fully constructed. Signed-off-by: Dariusz Marcinkiewicz <darekm@google.com> Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190814104520.6001-9-darekm@google.com
2019-08-16drm: Don't include drm/drm_encoder_slave.h when not neededLaurent Pinchart1-1/+0
The dw-hdmi, kirin and imx drivers include the drm/drm_encoder_slave.h header but don't use the encoder slave API. Remove it or replace it with drm/drm_encoder.h as needed. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2019-08-14drm/bridge: dumb-vga-dac: Fix dereferencing -ENODEV DDC channelGeert Uytterhoeven1-3/+4
If the VGA connector has no DDC channel, an error pointer will be dereferenced, e.g. on Salvator-XS: Unable to handle kernel NULL pointer dereference at virtual address 000000000000017d ... Call trace: sysfs_do_create_link_sd.isra.0+0x40/0x108 sysfs_create_link+0x20/0x40 drm_sysfs_connector_add+0xa8/0xc8 drm_connector_register.part.3+0x54/0xb0 drm_connector_register_all+0xb0/0xd0 drm_modeset_register_all+0x54/0x88 drm_dev_register+0x18c/0x1d8 rcar_du_probe+0xe4/0x150 ... This happens because vga->ddc either contains a valid DDC channel pointer, or -ENODEV, and drm_connector_init_with_ddc() expects a valid DDC channel pointer, or NULL. Fix this by resetting vga->ddc to NULL in case of -ENODEV, and replacing the existing error checks by non-NULL checks. This is similar to what the HDMI connector driver does. Fixes: a4f9087e85de141e ("drm/bridge: dumb-vga-dac: Provide ddc symlink in connector sysfs directory") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190813093046.4976-1-geert+renesas@glider.be
2019-08-14drm/bridge: dw-hdmi-i2s: add .get_eld supportJerome Brunet3-0/+13
Provide the eld to the generic hdmi-codec driver. This will let the driver enforce the maximum channel number and set the channel allocation depending on the hdmi sink. Cc: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190812125016.20169-1-jbrunet@baylibre.com
2019-08-14drm/bridge: dw-hdmi-i2s: enable only the required i2s lanesJerome Brunet2-2/+19
Enable the i2s lanes depending on the number of channel in the stream Reviewed-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190812120726.1528-8-jbrunet@baylibre.com
2019-08-14drm/bridge: dw-hdmi-i2s: reset audio fifo before applying new paramsJerome Brunet2-2/+5
When changing the audio hw params, reset the audio fifo to make sure any old remaining data is flushed. The databook mentions that such reset should be followed by a reset of the i2s block to make sure the samples stay aligned Reviewed-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190812120726.1528-7-jbrunet@baylibre.com
2019-08-14drm/bridge: dw-hdmi-i2s: set the channel allocationJerome Brunet1-0/+1
setup the channel allocation provided by the generic hdmi-codec driver Reviewed-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190812120726.1528-6-jbrunet@baylibre.com
2019-08-14drm/bridge: dw-hdmi-i2s: enable lpcm multi channelsJerome Brunet1-1/+2
Properly setup the channel count and layout in dw-hdmi i2s driver so we are not limited to 2 channels. Also correct the maximum channel reported by the DAI from 6 to 8 ch Reviewed-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190812120726.1528-5-jbrunet@baylibre.com
2019-08-14drm/bridge: dw-hdmi: set channel count in the infoframesJerome Brunet1-0/+4
Set the number of channel in the infoframes Reviewed-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190812120726.1528-4-jbrunet@baylibre.com
2019-08-14drm/bridge: dw-hdmi: move audio channel setup out of ahbJerome Brunet2-16/+36
Part of the channel count setup done in dw-hdmi ahb should actually be done whatever the interface providing the data. Let's move it to dw-hdmi driver instead. Reviewed-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190812120726.1528-3-jbrunet@baylibre.com
2019-08-14drm/bridge: dw-hdmi-i2s: support more i2s formatJerome Brunet2-5/+27
The dw-hdmi-i2s supports more formats than just regular i2s. Add support for left justified, right justified and dsp modes A and B. Reviewed-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190812120726.1528-2-jbrunet@baylibre.com
2019-08-14i2c: replace i2c_new_secondary_device with an ERR_PTR variantWolfram Sang1-9/+9
In the general move to have i2c_new_*_device functions which return ERR_PTR instead of NULL, this patch converts i2c_new_secondary_device(). There are only few users, so this patch converts the I2C core and all users in one go. The function gets renamed to i2c_new_ancillary_device() so out-of-tree users will get a build failure to understand they need to adapt their error checking code. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> # adv748x Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> # adv7511 + adv7604 Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # adv7604 Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-08-10drm/panel: drop return code from drm_panel_detach()Sam Ravnborg1-2/+1
There are no errors that can be reported by this function, so drop the return code. Fix the only bridge driver that checked the return result. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Emil Velikov <emil.velikov@collabora.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190804201637.1240-14-sam@ravnborg.org
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-26 22:15:50 +0300