summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/bridge
AgeCommit message (Collapse)AuthorFilesLines
2022-08-25drm/bridge: lvds-codec: Fix error checking of drm_of_lvds_get_data_mapping()Marek Vasut1-1/+1
[ Upstream commit 2bba782002c5dab6ca8d608b778b386fb912adff ] The drm_of_lvds_get_data_mapping() returns either negative value on error or MEDIA_BUS_FMT_* otherwise. The check for 'ret' would also catch the positive case of MEDIA_BUS_FMT_* and lead to probe failure every time 'data-mapping' DT property is specified. Fixes: 7c4dd0a266527 ("drm: of: Add drm_of_lvds_get_data_mapping") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Sam Ravnborg <sam@ravnborg.org> To: dri-devel@lists.freedesktop.org Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220801125419.167562-1-marex@denx.de Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-17Revert "drm/bridge: anx7625: Use DPI bus type"Robert Foss1-4/+4
commit 61922beba36adea8702fe8069b309c806f6608af upstream. This reverts commit a77c2af0994e24ee36c7ffb6dc852770bdf06fb1. This patch depends on the patches just aplied to the media tree, and will not build without them, which leaves drm-misc-next in a broken state. Let's revert the two latter patches until rc1 has been branched, and rc1 has been backmerged into drm-misc-next. Signed-off-by: Robert Foss <robert.foss@linaro.org> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20220523161520.354687-1-robert.foss@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-17drm/bridge: anx7625: Fix NULL pointer crash when using edp-panelHsin-Yi Wang1-8/+9
[ Upstream commit dfb02eb6bdf84697dbadd69a7df12db612ce4ed0 ] Move devm_of_dp_aux_populate_ep_devices() after pm runtime and i2c setup to avoid NULL pointer crash. edp-panel probe (generic_edp_panel_probe) calls pm_runtime_get_sync() to read EDID. At this time, bridge should have pm runtime enabled and i2c clients ready. Fixes: adca62ec370c ("drm/bridge: anx7625: Support reading edid through aux channel") Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> Reviewed-by: Xin Ji <xji@analogixsemi.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220706125254.2474095-4-hsinyi@chromium.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-17drm: bridge: sii8620: fix possible off-by-oneHangyu Hua1-2/+2
[ Upstream commit 21779cc21c732c5eff8ea1624be6590450baa30f ] The next call to sii8620_burst_get_tx_buf will result in off-by-one When ctx->burst.tx_count + size == ARRAY_SIZE(ctx->burst.tx_buf). The same thing happens in sii8620_burst_get_rx_buf. This patch also change tx_count and tx_buf to rx_count and rx_buf in sii8620_burst_get_rx_buf. It is unreasonable to check tx_buf's size and use rx_buf. Fixes: e19e9c692f81 ("drm/bridge/sii8620: add support for burst eMSC transmissions") Signed-off-by: Hangyu Hua <hbh25y@gmail.com> Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220518065856.18936-1-hbh25y@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-17drm: bridge: adv7511: Add check for mipi_dsi_driver_registerJiasheng Jiang1-3/+14
[ Upstream commit 831463667b5f4f1e5bce9c3b94e9e794d2bc8923 ] As mipi_dsi_driver_register could return error if fails, it should be better to check the return value and return error if fails. Moreover, if i2c_add_driver fails, mipi_dsi_driver_register should be reverted. Fixes: 1e4d58cd7f88 ("drm/bridge: adv7533: Create a MIPI DSI device") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220602103401.2980938-1-jiasheng@iscas.ac.cn Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-17drm/bridge: it6505: Add missing CRYPTO_HASH dependencyZheng Bin1-0/+2
[ Upstream commit abf0ba5a34eae0d7359228f4319a6659676fbd0a ] The driver uses crypto hash functions so it needs to select CRYPTO_HASH. This fixes build errors: drivers/gpu/drm/bridge/ite-it6505.o: in function `it6505_hdcp_wait_ksv_list': ite-it6505.c:(.text+0x4c26): undefined reference to `crypto_alloc_shash' ite-it6505.c:(.text+0x4c6d): undefined reference to `crypto_shash_digest' ite-it6505.c:(.text+0x4c7d): undefined reference to `crypto_destroy_tfm' ite-it6505.c:(.text+0x4d69): undefined reference to `crypto_destroy_tfm' Fixes: b5c84a9edcd4 ("drm/bridge: add it6505 driver") Signed-off-by: Zheng Bin <zhengbin13@huawei.com> Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220613150653.1310029-1-zhengbin13@huawei.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-17drm/bridge: anx7625: Zero error variable when panel bridge not presentNícolas F. R. A. Prado1-1/+3
[ Upstream commit 3f49f7591e7150c502aa8d04354941ec2394153f ] While parsing the DT, the anx7625 driver checks for the presence of a panel bridge on endpoint 1. If it is missing, pdata->panel_bridge stores the error pointer and the function returns successfully without first cleaning that variable. This is an issue since other functions later check for the presence of a panel bridge by testing the trueness of that variable. In order to ensure proper behavior, zero out pdata->panel_bridge before returning when no panel bridge is found. Fixes: 9e82ea0fb1df ("drm/bridge: anx7625: switch to devm_drm_of_get_bridge") Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220613163705.1531721-1-nfraprado@collabora.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-17drm: adv7511: override i2c address of cec before accessing itAntonio Borneo1-3/+4
[ Upstream commit 9cc4853e4781bf0dd0f35355dc92d97c9da02f5d ] Commit 680532c50bca ("drm: adv7511: Add support for i2c_new_secondary_device") allows a device tree node to override the default addresses of the secondary i2c devices. This is useful for solving address conflicts on the i2c bus. In adv7511_init_cec_regmap() the new i2c address of cec device is read from device tree and immediately accessed, well before it is written in the proper register to override the default address. This can cause an i2c error during probe and a consequent probe failure. Once the new i2c address is read from the device tree, override the default address before any attempt to access the cec. Tested with adv7533 and stm32mp157f. Signed-off-by: Antonio Borneo <antonio.borneo@foss.st.com> Fixes: 680532c50bca ("drm: adv7511: Add support for i2c_new_secondary_device") Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220607213144.427177-1-antonio.borneo@foss.st.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-17drm/bridge: lt9611uxc: Cancel only driver's workBjorn Andersson1-1/+1
[ Upstream commit dfa687bffc8a4a21ed929c7dececf01b8f1f52ee ] During device remove care needs to be taken that no work is pending before it removes the underlying DRM bridge etc, but this can be done on the specific work rather than waiting for the flush of the system-wide workqueue. Fixes: bc6fa8676ebb ("drm/bridge/lontium-lt9611uxc: move HPD notification out of IRQ handler") Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220601233818.1877963-1-bjorn.andersson@linaro.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-17drm: bridge: adv7511: Move CEC definitions to adv7511_cec.cFabio Estevam2-12/+12
[ Upstream commit 91776af1d8deb8f36cbec6bf2bf24b661b2b5cbb ] ADV7511_REG_CEC_RX_FRAME_HDR[] and ADV7511_REG_CEC_RX_FRAME_LEN[] are only used inside adv7511_cec.c. Move their definitions to this file to avoid the following build warnings when CONFIG_DRM_I2C_ADV7511_CEC is not selected: drivers/gpu/drm/bridge/adv7511/adv7511.h:229:17: warning: 'ADV7511_REG_CEC_RX_FRAME_HDR' defined but not used [-Wunused-const-variable=] drivers/gpu/drm/bridge/adv7511/adv7511.h:235:17: warning: 'ADV7511_REG_CEC_RX_FRAME_LEN' defined but not used [-Wunused-const-variable=] Reported-by: kernel test robot <lkp@intel.com> Fixes: ab0af093bf90 ("drm: bridge: adv7511: use non-legacy mode for CEC RX") Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220525215316.1133057-1-festevam@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-17drm/bridge: lt9611: Use both bits for HDMI sensingJohn Stultz1-1/+1
[ Upstream commit 649eb3828fb22e829e222ebd83f4e11dc503a565 ] In commit 19cf41b64e3b ("lontium-lt9611: check a different register bit for HDMI sensing"), the bit flag used to detect HDMI cable connect was switched from BIT(2) to BIT(0) to improve compatibility with some monitors that didn't seem to set BIT(2). However, with that change, I've seen occasional issues where the detection failed, because BIT(2) was set, but not BIT(0). Unfortunately, as I understand it, the bits and their function was never clearly documented. So lets instead check both (BIT(2) | BIT(0)) when checking the register. Cc: Yongqin Liu <yongqin.liu@linaro.org> Cc: Amit Pundir <amit.pundir@linaro.org> Cc: Peter Collingbourne <pcc@google.com> Cc: Vinod Koul <vkoul@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Robert Foss <robert.foss@linaro.org> Cc: kernel-team@android.com Fixes: 19cf41b64e3b ("lontium-lt9611: check a different register bit for HDMI sensing") Signed-off-by: John Stultz <jstultz@google.com> Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220511012612.3297577-2-jstultz@google.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-17drm/bridge: tc358767: Make sure Refclk clock are enabledMarek Vasut1-7/+25
[ Upstream commit 0b4c48f3e315d172e4cc06e10f2c8ba180788baf ] The Refclk may be supplied by SoC clock output instead of crystal oscillator, make sure the clock are enabled before any other action is performed with the bridge chip, otherwise it may either fail to operate at all, or miss reset GPIO toggle. Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Fixes: 7caff0fc4296e ("drm/bridge: tc358767: Add DPI to eDP bridge driver") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Jonas Karlman <jonas@kwiboo.se> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Marek Vasut <marex@denx.de> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Robert Foss <robert.foss@linaro.org> Cc: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20220520121543.11550-1-marex@denx.de Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-17drm/bridge: tc358767: Handle dsi_lanes == 0 as invalidMarek Vasut1-1/+1
[ Upstream commit 0d662350928e6787d29ab205e47e5aa6f1f792f9 ] Handle empty data-lanes = < >; property, which translates to dsi_lanes = 0 as invalid. Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Fixes: bbfd3190b6562 ("drm/bridge: tc358767: Add DSI-to-DPI mode support") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Jonas Karlman <jonas@kwiboo.se> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Marek Vasut <marex@denx.de> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Robert Foss <robert.foss@linaro.org> Cc: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220519095137.11896-1-marex@denx.de Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-17drm/bridge: anx7625: Use DPI bus typeXin Ji1-4/+4
[ Upstream commit a77c2af0994e24ee36c7ffb6dc852770bdf06fb1 ] As V4L2_FWNODE_BUS_TYPE_PARALLEL not properly descript for DPI interface, this patch use new defined V4L2_FWNODE_BUS_TYPE_DPI for it. Fixes: fd0310b6fe7d ("drm/bridge: anx7625: add MIPI DPI input feature") Signed-off-by: Xin Ji <xji@analogixsemi.com> Tested-by: Chen-Yu Tsai <wenst@chromium.org> Acked-by: Robert Foss <robert.foss@linaro.org> Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220422084720.959271-4-xji@analogixsemi.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-17drm: bridge: DRM_FSL_LDB should depend on ARCH_MXCGeert Uytterhoeven1-0/+1
[ Upstream commit a9ad5822366c5065e6a65fe5ff5090295ba98986 ] The Freescale i.MX8MP LDB bridge is only present on Freescale i.MX8MP SoCs. Hence add a dependency on ARCH_MXC, to prevent asking the user about this driver when configuring a kernel without i.MX SoC support. Fixes: 463db5c2ed4aed01 ("drm: bridge: ldb: Implement simple Freescale i.MX8MP LDB bridge") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/449e08ca791a3ca308de5477c1bdc1f6eb1b34e7.1652104211.git.geert+renesas@glider.be Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-04drm/bridge: fsl-ldb: Drop DE signal polarity inversionLiu Ying1-17/+0
It's unnecessary to invert input data enable signal polarity according to the output one. Let's drop the inversion. Since ->atomic_check() does nothing more than the inversion, it can be dropped entirely as well. Without this patch, 'koe,tx26d202vm0bwa' LVDS panel connected with i.MX8MP EVK board does not show any data on screen. Fixes: 463db5c2ed4a ("drm: bridge: ldb: Implement simple Freescale i.MX8MP LDB bridge") Cc: Andrzej Hajda <andrzej.hajda@intel.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Robert Foss <robert.foss@linaro.org> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Jonas Karlman <jonas@kwiboo.se> Cc: Jernej Skrabec <jernej.skrabec@gmail.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Marek Vasut <marex@denx.de> Cc: NXP Linux Team <linux-imx@nxp.com> Signed-off-by: Liu Ying <victor.liu@nxp.com> Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220701065634.4027537-4-victor.liu@nxp.com
2022-07-04drm/bridge: fsl-ldb: Enable split mode for LVDS dual linkLiu Ying1-1/+1
When LVDS dual link is used, we have to enable the LDB_CTRL_SPLIT_MODE bit. Fixes: 463db5c2ed4a ("drm: bridge: ldb: Implement simple Freescale i.MX8MP LDB bridge") Cc: Andrzej Hajda <andrzej.hajda@intel.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Robert Foss <robert.foss@linaro.org> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Jonas Karlman <jonas@kwiboo.se> Cc: Jernej Skrabec <jernej.skrabec@gmail.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Marek Vasut <marex@denx.de> Cc: NXP Linux Team <linux-imx@nxp.com> Signed-off-by: Liu Ying <victor.liu@nxp.com> Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220701065634.4027537-3-victor.liu@nxp.com
2022-07-04drm/bridge: fsl-ldb: Fix mode clock rate validationLiu Ying1-1/+1
With LVDS dual link, up to 160MHz mode clock rate is supported. With LVDS single link, up to 80MHz mode clock rate is supported. Fix mode clock rate validation by swapping the maximum mode clock rates of the two link modes. Fixes: 463db5c2ed4a ("drm: bridge: ldb: Implement simple Freescale i.MX8MP LDB bridge") Cc: Andrzej Hajda <andrzej.hajda@intel.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Robert Foss <robert.foss@linaro.org> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Jonas Karlman <jonas@kwiboo.se> Cc: Jernej Skrabec <jernej.skrabec@gmail.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Marek Vasut <marex@denx.de> Cc: NXP Linux Team <linux-imx@nxp.com> Signed-off-by: Liu Ying <victor.liu@nxp.com> Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220701065634.4027537-2-victor.liu@nxp.com
2022-06-08Merge v5.19-rc1 into drm-misc-fixesMaxime Ripard42-510/+3593
Let's kick-off the start of the 5.19 fix cycle Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2022-06-06drm/bridge: analogix_dp: Support PSR-exit to disable transitionBrian Norris1-4/+38
Most eDP panel functions only work correctly when the panel is not in self-refresh. In particular, analogix_dp_bridge_disable() tends to hit AUX channel errors if the panel is in self-refresh. Given the above, it appears that so far, this driver assumes that we are never in self-refresh when it comes time to fully disable the bridge. Prior to commit 846c7dfc1193 ("drm/atomic: Try to preserve the crtc enabled state in drm_atomic_remove_fb, v2."), this tended to be true, because we would automatically disable the pipe when framebuffers were removed, and so we'd typically disable the bridge shortly after the last display activity. However, that is not guaranteed: an idle (self-refresh) display pipe may be disabled, e.g., when switching CRTCs. We need to exit PSR first. Stable notes: this is definitely a bugfix, and the bug has likely existed in some form for quite a while. It may predate the "PSR helpers" refactor, but the code looked very different before that, and it's probably not worth rewriting the fix. Cc: <stable@vger.kernel.org> Fixes: 6c836d965bad ("drm/rockchip: Use the helpers for PSR") Signed-off-by: Brian Norris <briannorris@chromium.org> Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220228122522.v2.1.I161904be17ba14526f78536ccd78b85818449b51@changeid
2022-05-26Merge tag 'drm-next-2022-05-25' of git://anongit.freedesktop.org/drm/drmLinus Torvalds42-510/+3593
Pull drm updates from Dave Airlie: "Intel have enabled DG2 on certain SKUs for laptops, AMD has started some new GPU support, msm has user allocated VA controls dma-buf: - add dma_resv_replace_fences - add dma_resv_get_singleton - make dma_excl_fence private core: - EDID parser refactorings - switch drivers to drm_mode_copy/duplicate - DRM managed mutex initialization display-helper: - put HDMI, SCDC, HDCP, DSC and DP into new module gem: - rework fence handling ttm: - rework bulk move handling - add common debugfs for resource managers - convert to kvcalloc format helpers: - support monochrome formats - RGB888, RGB565 to XRGB8888 conversions fbdev: - cfb/sys_imageblit fixes - pagelist corruption fix - create offb platform device - deferred io improvements sysfb: - Kconfig rework - support for VESA mode selection bridge: - conversions to devm_drm_of_get_bridge - conversions to panel_bridge - analogix_dp - autosuspend support - it66121 - audio support - tc358767 - DSI to DPI support - icn6211 - PLL/I2C fixes, DT property - adv7611 - enable DRM_BRIDGE_OP_HPD - anx7625 - fill ELD if no monitor - dw_hdmi - add audio support - lontium LT9211 support, i.MXMP LDB - it6505: Kconfig fix, DPCD set power fix - adv7511 - CEC support for ADV7535 panel: - ltk035c5444t, B133UAN01, NV3052C panel support - DataImage FG040346DSSWBG04 support - st7735r - DT bindings fix - ssd130x - fixes i915: - DG2 laptop PCI-IDs ("motherboard down") - Initial RPL-P PCI IDs - compute engine ABI - DG2 Tile4 support - DG2 CCS clear color compression support - DG2 render/media compression formats support - ATS-M platform info - RPL-S PCI IDs added - Bump ADL-P DMC version to v2.16 - Support static DRRS - Support multiple eDP/LVDS native mode refresh rates - DP HDR support for HSW+ - Lots of display refactoring + fixes - GuC hwconfig support and query - sysfs support for multi-tile - fdinfo per-client gpu utilisation - add geometry subslices query - fix prime mmap with LMEM - fix vm open count and remove vma refcounts - contiguous allocation fixes - steered register write support - small PCI BAR enablement - GuC error capture support - sunset igpu legacy mmap support for newer devices - GuC version 70.1.1 support amdgpu: - Initial SoC21 support - SMU 13.x enablement - SMU 13.0.4 support - ttm_eu cleanups - USB-C, GPUVM updates - TMZ fixes for RV - RAS support for VCN - PM sysfs code cleanup - DC FP rework - extend CG/PG flags to 64-bit - SI dpm lockdep fix - runtime PM fixes amdkfd: - RAS/SVM fixes - TLB flush fixes - CRIU GWS support - ignore bogus MEC signals more efficiently msm: - Fourcc modifier for tiled but not compressed layouts - Support for userspace allocated IOVA (GPU virtual address) - DPU: DSC (Display Stream Compression) support - DP: eDP support - DP: conversion to use drm_bridge and drm_bridge_connector - Merge DPU1 and MDP5 MDSS driver - DPU: writeback support nouveau: - make some structures static - make some variables static - switch to drm_gem_plane_helper_prepare_fb radeon: - misc fixes/cleanups mxsfb: - rework crtc mode setting - LCDIF CRC support etnaviv: - fencing improvements - fix address space collisions - cleanup MMU reference handling gma500: - GEM/GTT improvements - connector handling fixes komeda: - switch to plane reset helper mediatek: - MIPI DSI improvements omapdrm: - GEM improvements qxl: - aarch64 support vc4: - add a CL submission tracepoint - HDMI YUV support - HDMI/clock improvements - drop is_hdmi caching virtio: - remove restriction of non-zero blob types vmwgfx: - support for cursormob and cursorbypass 4 - fence improvements tidss: - reset DISPC on startup solomon: - SPI support - DT improvements sun4i: - allwinner D1 support - drop is_hdmi caching imx: - use swap() instead of open-coding - use devm_platform_ioremap_resource - remove redunant initializations ast: - Displayport support rockchip: - Refactor IOMMU initialisation - make some structures static - replace drm_detect_hdmi_monitor with drm_display_info.is_hdmi - support swapped YUV formats, - clock improvements - rk3568 support - VOP2 support mediatek: - MT8186 support tegra: - debugabillity improvements" * tag 'drm-next-2022-05-25' of git://anongit.freedesktop.org/drm/drm: (1740 commits) drm/i915/dsi: fix VBT send packet port selection for ICL+ drm/i915/uc: Fix undefined behavior due to shift overflowing the constant drm/i915/reg: fix undefined behavior due to shift overflowing the constant drm/i915/gt: Fix use of static in macro mismatch drm/i915/audio: fix audio code enable/disable pipe logging drm/i915: Fix CFI violation with show_dynamic_id() drm/i915: Fix 'mixing different enum types' warnings in intel_display_power.c drm/i915/gt: Fix build error without CONFIG_PM drm/msm/dpu: handle pm_runtime_get_sync() errors in bind path drm/msm/dpu: add DRM_MODE_ROTATE_180 back to supported rotations drm/msm: don't free the IRQ if it was not requested drm/msm/dpu: limit writeback modes according to max_linewidth drm/amd: Don't reset dGPUs if the system is going to s2idle drm/amdgpu: Unmap legacy queue when MES is enabled drm: msm: fix possible memory leak in mdp5_crtc_cursor_set() drm/msm: Fix fb plane offset calculation drm/msm/a6xx: Fix refcount leak in a6xx_gpu_init drm/msm/dsi: don't powerup at modeset time for parade-ps8640 drm/rockchip: Change register space names in vop2 dt-bindings: display: rockchip: make reg-names mandatory for VOP2 ...
2022-05-21drm/bridge: ti-sn65dsi83: Handle dsi_lanes == 0 as invalidMarek Vasut1-1/+1
Handle empty data-lanes = < >; property, which translates to dsi_lanes = 0 as invalid. Fixes: ceb515ba29ba6 ("drm/bridge: ti-sn65dsi83: Add TI SN65DSI83 and SN65DSI84 driver") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Jonas Karlman <jonas@kwiboo.se> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Marek Vasut <marex@denx.de> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Robert Foss <robert.foss@linaro.org> Cc: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220518233844.248504-1-marex@denx.de
2022-05-05drm/bridge: tc358767: Fix DP bridge mode detection from DT endpointsMarek Vasut1-2/+4
Per toshiba,tc358767.yaml DT binding document, port@2 the output (e)DP port is optional. In case this port is not described in DT, the bridge driver operates in DPI-to-DP mode. Make sure the driver treats this as a valid mode of operation instead of reporting invalid mode. Fixes: 71f7d9c03118 ("drm/bridge: tc358767: Detect bridge mode from connected endpoints in DT") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Jonas Karlman <jonas@kwiboo.se> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Marek Vasut <marex@denx.de> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Robert Foss <robert.foss@linaro.org> Cc: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220429204625.241591-1-marex@denx.de
2022-05-04drm/bridge: ite-it6505: add missing Kconfig option selectFabien Parent1-0/+1
The IT6505 is using functions provided by the DRM_DP_HELPER driver. In order to avoid having the bridge enabled but the helper disabled, let's add a select in order to be sure that the DP helper functions are always available. Fixes: b5c84a9edcd4 ("drm/bridge: add it6505 driver") Signed-off-by: Fabien Parent <fparent@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220426141536.274727-1-fparent@baylibre.com
2022-05-02drm/bridge: tfp410: Make tfp410_fini() return voidUwe Kleine-König1-5/+7
tfp410_fini() always returns zero. Make it return no value which makes it easier to see in the callers that there is no error to handle. Also the return value of i2c and platform driver remove callbacks is ignored anyway. This prepares making i2c and platform remove callbacks return void, too. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220428162803.185275-1-u.kleine-koenig@pengutronix.de
2022-05-02drm: bridge: ldb: Implement simple Freescale i.MX8MP LDB bridgeMarek Vasut3-0/+351
The i.MX8MP contains two syscon registers which are responsible for configuring the on-SoC DPI-to-LVDS serializer. Implement a simple bridge driver for this serializer. -- - Add sentinel of_device_table - Add RB from Sam - Rename to fsl-ldb altogether Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Peng Fan <peng.fan@nxp.com> Cc: Robby Cai <robby.cai@nxp.com> Cc: Robert Foss <robert.foss@linaro.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> To: dri-devel@lists.freedesktop.org V2: - Rename syscon to fsl,syscon V3: - Consistently use MX8MP V4: - Fix MODULE_DESCRIPTION to also use MX8MP Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220426193645.244792-2-marex@denx.de
2022-05-02drm: bridge: adv7511: use non-legacy mode for CEC RXAlvin Šipraga3-32/+106
The ADV7511 family of bridges supports two modes for CEC RX: legacy and non-legacy mode. The only difference is whether the chip uses a single CEC RX buffer, or uses all three available RX buffers. Currently the adv7511 driver uses legacy mode. While debugging a stall in CEC RX on an ADV7535, we reached out to Analog Devices, who suggested to use non-legacy mode instead. According to the programming guide for the ADV7511 [1], and the register control manual of the ADV7535 [2], this is the default behaviour on reset. As previously stated, the adv7511 driver currently overrides this to legacy mode. This patch updates the adv7511 driver to instead use non-legacy mode with all three CEC RX buffers. As a result of this change, we no longer experience any stalling of CEC RX with the ADV7535. It is not known why non-legacy mode solves this particular issue, but besides this, no functional change is to be expected by this patch. Please note that this has only been tested on an ADV7535. What follows is a brief description of the non-legacy mode interrupt handling behaviour. The programming guide in [1] gives a more detailed explanation. With three RX buffers, the interrupt handler checks the CEC_RX_STATUS register (renamed from CEC_RX_ENABLE in this patch), which contains 2-bit psuedo-timestamps for each of the RX buffers. The RX timestamps for each buffer represent the time of arrival for the CEC frame held in a given buffer, with lower timestamp values indicating chronologically older frames. A special value of 0 indicates that the given RX buffer is inactive and should be skipped. The interrupt handler parses these timestamps and then reads the active RX buffers in the prescribed order using the same logic as before. Changes have been made to ensure that the correct RX buffer is cleared after processing. This clearing procesure also sets the timestamp of the given RX buffer to 0 to mark it as inactive. [1] https://www.analog.com/media/en/technical-documentation/user-guides/ADV7511_Programming_Guide.pdf cf. CEC Map, register 0x4A, bit 3, default value 1: 0 = Use only buffer 0 to store CEC frames (Legacy mode) 1 = Use all 3 buffers to stores the CEC frames (Non-legacy mode) [2] The ADV7535 register control manual is under NDA, but trust me when I say that non-legacy CEC RX mode is the default here too. Here the register is offset by 0x70 and has an address of 0xBA in the DSI_CEC regiser map. Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk> Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220423120854.1503163-3-alvin@pqrs.dk
2022-05-02drm: bridge: adv7511: enable CEC support for ADV7535Alvin Šipraga3-14/+10
Like the ADV7533, the ADV7535 has an offset for the CEC register map, and it is the same value (ADV7533_REG_CEC_OFFSET = 0x70). Rather than testing for numerous chip types in the offset calculations throughout the driver, just compute it during driver probe and put it in the private adv7511 data structure. Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk> Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220423120854.1503163-2-alvin@pqrs.dk
2022-05-02drm/bridge: it6505: Send DPCD SET_POWER to downstreamPin-Yen Lin1-11/+18
Send DPCD SET_POWER command to downstream in .atomic_disable to make the downstream monitor enter the power down mode, so the device suspend won't be affected. Fixes: b5c84a9edcd418 ("drm/bridge: add it6505 driver") Signed-off-by: Pin-Yen Lin <treapking@chromium.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220425134424.1150965-1-treapking@chromium.org Reviewed-by: Robert Foss <robert.foss@linaro.org>
2022-04-29drm/bridge: tc358767: Fix (e)DP bridge endpoint parsing in dedicated functionMarek Vasut1-1/+1
Per toshiba,tc358767.yaml DT binding document, port@2 the output (e)DP port is optional. In case this port is not described in DT, the bridge driver operates in DPI-to-DP mode. The drm_of_find_panel_or_bridge() call in tc_probe_edp_bridge_endpoint() returns -ENODEV in case port@2 is not present in DT and this specific return value is incorrectly propagated outside of tc_probe_edp_bridge_endpoint() function. All other error values must be propagated and are propagated correctly. Return 0 in case the port@2 is missing instead, that reinstates the original behavior before the commit this patch fixes. Fixes: 8478095a8c4b ("drm/bridge: tc358767: Move (e)DP bridge endpoint parsing into dedicated function") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Jonas Karlman <jonas@kwiboo.se> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Marek Vasut <marex@denx.de> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Robert Foss <robert.foss@linaro.org> Cc: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220428213132.447890-1-marex@denx.de
2022-04-26drm/bridge: tc358762: drop connector fieldDmitry Baryshkov1-1/+0
The tc358762.connector field is unused. Remove it to save space. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220426011359.2861224-1-dmitry.baryshkov@linaro.org
2022-04-25drm/display: Move SCDC helpers into display-helper libraryThomas Zimmermann1-1/+1
SCDC is the Status and Control Data Channel for HDMI. Move the SCDC helpers into display/ and split the header into files for core and helpers. Update all affected drivers. No functional changes. To avoid the proliferation of Kconfig options, SCDC is part of DRM's support for HDMI. If necessary, a new option could make SCDC an independent feature. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220421073108.19226-9-tzimmermann@suse.de
2022-04-25drm/display: Move HDMI helpers into display-helper moduleThomas Zimmermann2-1/+3
Move DRM's HMDI helpers into the display/ subdirectoy and add it to DRM's display helpers. Update all affected drivers. No functional changes. The HDMI helpers were implemented in the EDID and connector code, but are actually unrelated. With the move to the display-helper library, we can remove the dependency on drm_edid.{c,h} in some driver's HDMI source files. Several of the HDMI helpers remain in EDID code because both share parts of their implementation internally. With better refractoring of the EDID code, those HDMI helpers could be moved into the display-helper library as well. v3: * fix Kconfig dependencies (Javier) v2: * reduce HDMI helpers to avoid exporting functions (Jani) * fix include statements (Jani, Javier) * update Kconfig symbols Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220421073108.19226-8-tzimmermann@suse.de
2022-04-25drm/display: Move HDCP helpers into display-helper moduleThomas Zimmermann7-4/+7
Move DRM's HDCP helper library into the display/ subdirectory and add it to DRM's display helpers. Split the header file into core and helpers. Update all affected drivers. No functional changes. v3: * fix Kconfig dependencies v2: * fix include statements (Jani, Javier) * update Kconfig symbols Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220421073108.19226-7-tzimmermann@suse.de
2022-04-25drm/display: Introduce a DRM display-helper moduleThomas Zimmermann3-9/+18
Replace the DP-helper module with a display-helper module. The support for DisplayPort becomes an internal option that drivers have to select. Update all related Kconfig and Makefile rules. Besides the existing code for DisplayPort, the new module will contain helpers for other video-output standards, such as HDMI. Drivers will have to select their required video-output helpers. Linking all display-related code into a single module avoids the proliferation of small kernel modules. The module parameters drm_dp_cec_unregister_delay, dp_aux_i2c_speed_khz, and dp_aux_i2c_transfer_size are moving from the drm_dp_helper namespace to drm_display_helper. v2: * mention module parameters in commit message (Javier) * distiguish between display module and DP support in Kconfig * update Makefile rules for DP helpers * move Kconfig rules into separate file under display/ Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220421073108.19226-4-tzimmermann@suse.de
2022-04-25drm: Rename dp/ to display/Thomas Zimmermann12-15/+15
Rename dp/ to display/ to account for additional display-related helpers, such as HDMI. Update all related include statements. No functional changes. Various drivers, such as i915 and amdgpu, use similar naming scheme by putting code for video-output standards into a local display/ directory. The new directory's name is aligned with this convention. v2: * update commit message (Javier) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220421073108.19226-3-tzimmermann@suse.de
2022-04-22drm/bridge: Fix it6505 Kconfig DRM_DP_AUX_BUS dependencyRobert Foss1-0/+1
it6505 depends on DRM_DP_AUX_BUS, the kconfig for it6505 should reflect this dependency using 'select'. Fixes: b5c84a9edcd4 ("drm/bridge: add it6505 driver") Reported-by: kernel test robot <lkp@intel.com> Suggested-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220421131415.1289469-1-robert.foss@linaro.org
2022-04-22drm: bridge: dw_hdmi: Audio: fix returnvar.cocci warningskernel test robot1-4/+2
drivers/gpu/drm/bridge/synopsys/dw-hdmi-gp-audio.c:80:5-8: Unneeded variable: "ret". Return "0" on line 94 drivers/gpu/drm/bridge/synopsys/dw-hdmi-gp-audio.c:105:5-8: Unneeded variable: "ret". Return "0" on line 112 Remove unneeded variable used to store return value. Generated by: scripts/coccinelle/misc/returnvar.cocci CC: Sandor Yu <Sandor.yu@nxp.com> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: kernel test robot <lkp@intel.com> Reviewed-by: Sandor Yu <Sandor.yu@nxp.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/YmFzutFV/iDyEQF2@dd18de969aa6
2022-04-21drm/bridge: Fix error handling in analogix_dp_probeMiaoqian Lin1-5/+13
In the error handling path, the clk_prepare_enable() function call should be balanced by a corresponding 'clk_disable_unprepare()' call, as already done in the remove function. Fixes: 3424e3a4f844 ("drm: bridge: analogix/dp: split exynos dp driver to bridge directory") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220420011644.25730-1-linmq006@gmail.com
2022-04-19drm: bridge: icn6211: Add DSI lane count DT property parsingMarek Vasut1-2/+21
The driver currently hard-codes DSI lane count to two, however the chip is capable of operating in 1..4 DSI lanes mode. Parse 'data-lanes' DT property and program the result into DSI_CTRL register. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Robert Foss <robert.foss@linaro.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> To: dri-devel@lists.freedesktop.org Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220407185617.179573-2-marex@denx.de
2022-04-19drm/bridge: anx7625: Use uint8 for lane-swing arraysNícolas F. R. A. Prado2-8/+8
As defined in the anx7625 dt-binding, the analogix,lane0-swing and analogix,lane1-swing properties are uint8 arrays. Yet, the driver was reading the array as if it were of uint32 and masking to 8-bit before writing to the registers. This means that a devicetree written in accordance to the dt-binding would have its values incorrectly parsed. Fix the issue by reading the array as uint8 and storing them as uint8 internally, so that we can also drop the masking when writing the registers. Fixes: fd0310b6fe7d ("drm/bridge: anx7625: add MIPI DPI input feature") Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220408013034.673418-1-nfraprado@collabora.com
2022-04-19drm: bridge: dw_hdmi: Audio: Add General Parallel Audio (GPA) driverSandor Yu5-4/+351
General Parallel Audio (GPA) interface is one of the supported audio interface for synopsys HDMI module, which has verified for i.MX8MPlus platform. This is initial version for GPA. Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Signed-off-by: Sandor Yu <Sandor.yu@nxp.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/f21ba3e8c4d9d028ac74c6f3c588ddbffe739399.1649989179.git.Sandor.yu@nxp.com
2022-04-19drm: bridge: dw_hdmi: add reset function for PHY GEN1Sandor Yu1-3/+11
PHY reset register(MC_PHYRSTZ) active high reset control for PHY GEN2, and active low reset control for PHY GEN1. Rename function dw_hdmi_phy_reset to dw_hdmi_phy_gen2_reset. Add dw_hdmi_phy_gen1_reset function for PHY GEN1. Signed-off-by: Sandor Yu <Sandor.yu@nxp.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/e0b3be2d63fe3e95246fb8b8b0dcd57415b29e04.1649989179.git.Sandor.yu@nxp.com
2022-04-19drm: bridge: dw_hdmi: Enable GCP only for Deep ColorSandor Yu2-0/+20
HDMI1.4b specification section 6.5.3: Source shall only send GCPs with non-zero CD to sinks that indicate support for Deep Color. DW HDMI GCP default enabled, but only transmit CD and do not handle AVMUTE, PP norDefault_Phase (yet). Disable Auto GCP when 24-bit color for sinks that not support Deep Color. Signed-off-by: Sandor Yu <Sandor.yu@nxp.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/78fa41e4fb3d3d53354034bc221fcf870dbac617.1649989179.git.Sandor.yu@nxp.com
2022-04-19drm: bridge: dw_hdmi: default enable workaround to clear the overflowSandor Yu1-16/+7
i.MX8MPlus (v2.13a) has verified need the workaround to clear the overflow with one iteration. Only i.MX6Q(v1.30a) need the workaround with 4 iterations, the others versions later than v1.3a have been identified as needing the workaround with a single iteration. Default enable the workaround with one iteration for all versions later than v1.30a. Signed-off-by: Sandor Yu <Sandor.yu@nxp.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/561951005a85574dcdd108e5d6a3a87df930ea3d.1649989179.git.Sandor.yu@nxp.com
2022-04-19drm: bridge: panel: Register connector if DRM device is already registeredMarek Szyprowski1-2/+5
If panel_bridge_attach() happens after DRM device registration, the created connector will not be registered by the DRM core anymore. Fix this by registering it explicitly in such case. This fixes the following issue observed on Samsung Exynos4210-based Trats board with a DSI panel (the panel driver is registered after the Exynos DRM component device is bound): $ ./modetest -c -Mexynos could not get connector 56: No such file or directory Segmentation fault While touching this, move the connector reset() call also under the DRM device registered check, because otherwise it is not really needed. Fixes: 934aef885f9d ("drm: bridge: panel: Reset the connector state pointer") Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220419091422.4255-1-m.szyprowski@samsung.com
2022-04-19drm: bridge: adv7511: Enable DRM_BRIDGE_OP_HPD based on HPD interruptBiju Das1-2/+4
Connector detection using poll method won't work in case of bridge attached to the encoder with the flag DRM_BRIDGE_ATTACH_NO_CONNECTOR, as the code defaults to HPD. Enable DRM_BRIDGE_OP_HPD based on HPD interrupt availability, so that it will fall back to polling, if HPD is not available. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220419142453.48839-1-biju.das.jz@bp.renesas.com
2022-04-19drm/bridge: lt9211: Add Lontium LT9211 bridge driverMarek Vasut3-0/+816
Add driver for Lontium LT9211 Single/Dual-Link DSI/LVDS or Single DPI to Single-link/Dual-Link DSI/LVDS or Single DPI bridge. This chip is highly capable at converting formats, but sadly it is also highly undocumented. This driver is written without any documentation from Lontium and based only on shreds of information available in various obscure example codes, hence long runs of unknown register patches and lengthy delays in various places. Whichever register meaning could be divined from its behavior has at least a comment around it. Currently the only mode tested is Single-link DSI to Single-link LVDS. Dual-link LVDS might work as well, the register programming is in place, but is untested. Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Robert Foss <robert.foss@linaro.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> To: dri-devel@lists.freedesktop.org Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220419143958.94873-2-marex@denx.de
2022-04-19drm/bridge: anx7625: Fill in empty ELD when no connectorHsin-Yi Wang1-6/+6
Speaker may share I2S with DP and .get_eld callback will be called when speaker is playing. When HDMI wans't connected, the connector will be null. Instead of return an error, fill in empty ELD. Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> Reviewed-by: Xin Ji <xji@analogixsemi.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220414090003.1806535-1-hsinyi@chromium.org
2022-04-13drm: bridge: icn6211: Convert to regmapMarek Vasut2-8/+89
To make debugging easier, convert driver to regmap. Implement read and write regmap tables for known registers, keep all known register readable and mark those which are obviously read-only as not writeable. Use common I2C regmap for the I2C configuration, implement custom regmap bus for DSI configuration. The later is mandatory as this chip requires one extra byte set to read access length between register address and data. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Mark Brown <broonie@kernel.org> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Robert Foss <robert.foss@linaro.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> To: dri-devel@lists.freedesktop.org Acked-by: Mark Brown <broonie@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220403171004.368464-1-marex@denx.de
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-25 22:34:20 +0300