summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/bridge
AgeCommit message (Collapse)AuthorFilesLines
2025-04-10gpu: cdns-mhdp8546: fix call balance of mhdp->clk handling routinesVitalii Mordan1-9/+3
[ Upstream commit f65727be3fa5f252c8d982d15023aab8255ded19 ] If the clock mhdp->clk was not enabled in cdns_mhdp_probe(), it should not be disabled in any path. The return value of clk_prepare_enable() is not checked. If mhdp->clk was not enabled, it may be disabled in the error path of cdns_mhdp_probe() (e.g., if cdns_mhdp_load_firmware() fails) or in cdns_mhdp_remove() after a successful cdns_mhdp_probe() call. Use the devm_clk_get_enabled() helper function to ensure proper call balance for mhdp->clk. Found by Linux Verification Center (linuxtesting.org) with Klever. Fixes: fb43aa0acdfd ("drm: bridge: Add support for Cadence MHDP8546 DPI/DP bridge") Signed-off-by: Vitalii Mordan <mordan@ispras.ru> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Robert Foss <rfoss@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20250214154632.1907425-1-mordan@ispras.ru Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-04-10drm/bridge: it6505: fix HDCP V match check is not performed correctlyHermes Wu1-3/+4
[ Upstream commit a5072fc77fb9e38fa9fd883642c83c3720049159 ] Fix a typo where V compare incorrectly compares av[] with av[] itself, which can result in HDCP failure. The loop of V compare is expected to iterate for 5 times which compare V array form av[0][] to av[4][]. It should check loop counter reach the last statement "i == 5" before return true Fixes: 0989c02c7a5c ("drm/bridge: it6505: fix HDCP CTS compare V matching") Signed-off-by: Hermes Wu <Hermes.wu@ite.com.tw> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Robert Foss <rfoss@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20250121-fix-hdcp-v-comp-v4-1-185f45c728dc@ite.com.tw Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-04-10drm/bridge: ti-sn65dsi86: Fix multiple instancesGeert Uytterhoeven1-0/+2
[ Upstream commit 574f5ee2c85a00a579549d50e9fc9c6c072ee4c4 ] Each bridge instance creates up to four auxiliary devices with different names. However, their IDs are always zero, causing duplicate filename errors when a system has multiple bridges: sysfs: cannot create duplicate filename '/bus/auxiliary/devices/ti_sn65dsi86.gpio.0' Fix this by using a unique instance ID per bridge instance. The instance ID is derived from the I2C adapter number and the bridge's I2C address, to support multiple instances on the same bus. Fixes: bf73537f411b ("drm/bridge: ti-sn65dsi86: Break GPIO and MIPI-to-eDP bridge into sub-drivers") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/7a68a0e3f927e26edca6040067fb653eb06efb79.1733840089.git.geert+renesas@glider.be Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-17drm/bridge: it6505: fix HDCP CTS KSV list wait timerHermes Wu1-10/+10
[ Upstream commit 9f9eef9ec1a2b57d95a86fe81df758e8253a7766 ] HDCP must disabled encryption and restart authentication after waiting KSV for 5s. The original method uses a counter in a waitting loop that may wait much longer than it is supposed to. Use time_after() for KSV wait timeout. Signed-off-by: Hermes Wu <hermes.wu@ite.com.tw> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20241230-v7-upstream-v7-9-e0fdd4844703@ite.corp-partner.google.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-17drm/bridge: it6505: fix HDCP CTS compare V matchingHermes Wu1-13/+19
[ Upstream commit 0989c02c7a5c887c70afeae80c64d0291624e1a7 ] When HDCP negotiation with a repeater device. Checking SHA V' matching must retry 3 times before restarting HDCP. Signed-off-by: Hermes Wu <hermes.wu@ite.com.tw> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20241230-v7-upstream-v7-8-e0fdd4844703@ite.corp-partner.google.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-17drm/bridge: it6505: fix HDCP encryption when R0 readyHermes Wu1-8/+9
[ Upstream commit 8c01b0bae2f9e58f2fee0e811cb90d8331986554 ] When starting HDCP authentication, HDCP encryption should be enabled when R0'is checked. Change encryption enables time at R0' ready. The hardware HDCP engine trigger is changed and the repeater KSV fails will restart HDCP. Signed-off-by: Hermes Wu <hermes.wu@ite.com.tw> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20241230-v7-upstream-v7-6-e0fdd4844703@ite.corp-partner.google.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-17drm/bridge: it6505: fix HDCP Bstatus checkHermes Wu1-3/+9
[ Upstream commit 0fd2ff47d8c207fa3173661de04bb9e8201c0ad2 ] When HDCP is activated, a DisplayPort source receiving CP_IRQ from the sink shall check Bstatus from DPCD and process the corresponding value Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Hermes Wu <hermes.wu@ite.com.tw> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20241230-v7-upstream-v7-5-e0fdd4844703@ite.corp-partner.google.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-17drm/bridge: it6505: Change definition MAX_HDCP_DOWN_STREAM_COUNTHermes Wu1-1/+1
[ Upstream commit 85597bc0d70c287ba41f17d14d3d857a38a3d727 ] A HDCP source device shall support max downstream to 127 devices. Change definition MAX_HDCP_DOWN_STREAM_COUNT to 127 KSVs shall save for DRM blocked devices check. This results in struct it6505 growth by ~0.5 KiB. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Hermes Wu <hermes.wu@ite.com.tw> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20241230-v7-upstream-v7-4-e0fdd4844703@ite.corp-partner.google.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-17drm/bridge: ite-it66121: use eld_mutex to protect access to connector->eldDmitry Baryshkov1-0/+2
[ Upstream commit 39ead6e02ea7d19b421e9d42299d4293fed3064e ] Reading access to connector->eld can happen at the same time the drm_edid_to_eld() updates the data. Take the newly added eld_mutex in order to protect connector->eld from concurrent access. Reviewed-by: Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20241206-drm-connector-eld-mutex-v2-3-c9bce1ee8bea@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-17drm/bridge: anx7625: use eld_mutex to protect access to connector->eldDmitry Baryshkov1-0/+2
[ Upstream commit e72bf423a60afd744d13e40ab2194044a3af5217 ] Reading access to connector->eld can happen at the same time the drm_edid_to_eld() updates the data. Take the newly added eld_mutex in order to protect connector->eld from concurrent access. Reviewed-by: Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20241206-drm-connector-eld-mutex-v2-2-c9bce1ee8bea@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-08drm/bridge: it6505: Change definition of AUX_FIFO_MAX_SIZEHermes Wu1-1/+1
[ Upstream commit c14870218c14532b0f0a7805b96a4d3c92d06fb2 ] The hardware AUX FIFO is 16 bytes Change definition of AUX_FIFO_MAX_SIZE to 16 Fixes: b5c84a9edcd4 ("drm/bridge: add it6505 driver") Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Hermes Wu <hermes.wu@ite.com.tw> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20241230-v7-upstream-v7-1-e0fdd4844703@ite.corp-partner.google.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-01-16Merge tag 'drm-misc-fixes-2025-01-15' of ↵Dave Airlie1-2/+2
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes drm-misc-fixes for v6.13: - itee-it6263 error handling fix. - Fix warn when unloading v3d. - Fix W=1 build for kunit tests. - Fix backlight regression for macbooks 5,1 in nouveau. - Handle YCbCr420 better in bridge code, with tests. - Fix cross-device fence handling in nouveau. - Fix BO reservation handling in vmwgfx. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/a89adcd5-2042-4e7f-93f4-2b299bb1ef17@linux.intel.com
2025-01-15drm/bridge: ite-it6263: Prevent error pointer dereference in probe()Dan Carpenter1-2/+2
If devm_i2c_new_dummy_device() fails then we were supposed to return an error code, but instead the function continues and will crash on the next line. Add the missing return statement. Fixes: 049723628716 ("drm/bridge: Add ITE IT6263 LVDS to HDMI converter") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Liu Ying <victor.liu@nxp.com> Signed-off-by: Liu Ying <victor.liu@nxp.com> Link: https://patchwork.freedesktop.org/patch/msgid/804a758b-f2e7-4116-b72d-29bc8905beed@stanley.mountain
2025-01-03Merge tag 'drm-misc-fixes-2025-01-02' of ↵Dave Airlie3-7/+21
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes drm-misc-fixes for v6.13-rc6: - Only fixes for adv7511 driver, including a use-after-free. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/f58429b7-5f11-4b78-b577-de32b41299ea@linux.intel.com
2024-12-20drm: adv7511: Drop dsi single lane supportBiju Das1-1/+1
As per [1] and [2], ADV7535/7533 supports only 2-, 3-, or 4-lane. Drop unsupported 1-lane. [1] https://www.analog.com/media/en/technical-documentation/data-sheets/ADV7535.pdf [2] https://www.analog.com/media/en/technical-documentation/data-sheets/ADV7533.pdf Fixes: 1e4d58cd7f88 ("drm/bridge: adv7533: Create a MIPI DSI device") Reported-by: Hien Huynh <hien.huynh.px@renesas.com> Cc: stable@vger.kernel.org Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Adam Ford <aford173@gmail.com> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241119192040.152657-4-biju.das.jz@bp.renesas.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2024-12-20drm: adv7511: Fix use-after-free in adv7533_attach_dsi()Biju Das2-4/+8
The host_node pointer was assigned and freed in adv7533_parse_dt(), and later, adv7533_attach_dsi() uses the same. Fix this use-after-free issue by dropping of_node_put() in adv7533_parse_dt() and calling of_node_put() in error path of probe() and also in the remove(). Fixes: 1e4d58cd7f88 ("drm/bridge: adv7533: Create a MIPI DSI device") Cc: stable@vger.kernel.org Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241119192040.152657-2-biju.das.jz@bp.renesas.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2024-12-20drm/bridge: adv7511_audio: Update Audio InfoFrame properlyStefan Ekenberg1-2/+12
AUDIO_UPDATE bit (Bit 5 of MAIN register 0x4A) needs to be set to 1 while updating Audio InfoFrame information and then set to 0 when done. Otherwise partially updated Audio InfoFrames could be sent out. Two cases where this rule were not followed are fixed: - In adv7511_hdmi_hw_params() make sure AUDIO_UPDATE bit is updated before/after setting ADV7511_REG_AUDIO_INFOFRAME. - In audio_startup() use the correct register for clearing AUDIO_UPDATE bit. The problem with corrupted audio infoframes were discovered by letting a HDMI logic analyser check the output of ADV7535. Note that this patchs replaces writing REG_GC(1) with REG_INFOFRAME_UPDATE. Bit 5 of REG_GC(1) is positioned within field GC_PP[3:0] and that field doesn't control audio infoframe and is read- only. My conclusion therefore was that the author if this code meant to clear bit 5 of REG_INFOFRAME_UPDATE from the very beginning. Tested-by: Biju Das <biju.das.jz@bp.renesas.com> Fixes: 53c515befe28 ("drm/bridge: adv7511: Add Audio support") Signed-off-by: Stefan Ekenberg <stefan.ekenberg@axis.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20241119-adv7511-audio-info-frame-v4-1-4ae68e76c89c@axis.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2024-12-02Get rid of 'remove_new' relic from platform driver structLinus Torvalds22-22/+22
The continual trickle of small conversion patches is grating on me, and is really not helping. Just get rid of the 'remove_new' member function, which is just an alias for the plain 'remove', and had a comment to that effect: /* * .remove_new() is a relic from a prototype conversion of .remove(). * New drivers are supposed to implement .remove(). Once all drivers are * converted to not use .remove_new any more, it will be dropped. */ This was just a tree-wide 'sed' script that replaced '.remove_new' with '.remove', with some care taken to turn a subsequent tab into two tabs to make things line up. I did do some minimal manual whitespace adjustment for places that used spaces to line things up. Then I just removed the old (sic) .remove_new member function, and this is the end result. No more unnecessary conversion noise. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2024-11-22Merge tag 'drm-next-2024-11-21' of https://gitlab.freedesktop.org/drm/kernelLinus Torvalds30-118/+2868
Pull drm updates from Dave Airlie: "There's a lot of rework, the panic helper support is being added to more drivers, v3d gets support for HW superpages, scheduler documentation, drm client and video aperture reworks, some new MAINTAINERS added, amdgpu has the usual lots of IP refactors, Intel has some Pantherlake enablement and xe is getting some SRIOV bits, but just lots of stuff everywhere. core: - split DSC helpers from DP helpers - clang build fixes for drm/mm test - drop simple pipeline support for gem vram - document submission error signaling - move drm_rect to drm core module from kms helper - add default client setup to most drivers - move to video aperture helpers instead of drm ones tests: - new framebuffer tests ttm: - remove swapped and pinned BOs from TTM lru panic: - fix uninit spinlock - add ABGR2101010 support bridge: - add TI TDP158 support - use standard PM OPS dma-fence: - use read_trylock instead of read_lock to help lockdep scheduler: - add errno to sched start to report different errors - add locking to drm_sched_entity_modify_sched - improve documentation xe: - add drm_line_printer - lots of refactoring - Enable Xe2 + PES disaggregation - add new ARL PCI ID - SRIOV development work - fix exec unnecessary implicit fence - define and parse OA sync props - forcewake refactoring i915: - Enable BMG/LNL ultra joiner - Enable 10bpx + CCS scanout on ICL+, fp16/CCS on TGL+ - use DSB for plane/color mgmt - Arrow lake PCI IDs - lots of i915/xe display refactoring - enable PXP GuC autoteardown - Pantherlake (PTL) Xe3 LPD display enablement - Allow fastset HDR infoframe changes - write DP source OUI for non-eDP sinks - share PCI IDs between i915 and xe amdgpu: - SDMA queue reset support - SMU 13.0.6, JPEG 4.0.3 updates - Initial runtime repartitioning support - rework IP structs for multiple IP instances - Fetch EDID from _DDC if available - SMU13 zero rpm user control - lots of fixes/cleanups amdkfd: - Increase event FIFO size - add topology cap flag for per queue reset msm: - DPU: - SA8775P support - (disabled by default) MSM8917, MSM8937, MSM8953 and MSM8996 support - Enable large framebuffer support - Drop MSM8998 and SDM845 - DP: - SA8775P support - GPU: - a7xx preemption support - Adreno A663 support ast: - warn about unsupported TX chips ivpu: - add coredump - add pantherlake support rockchip: - 4K@60Hz display enablement - generate pll programming tables panthor: - add timestamp query API - add realtime group priority - add fdinfo support etnaviv: - improve handling of DMA address limits - improve GPU hangcheck exynos: - Decon Exynos7870 support mediatek: - add OF graph support omap: - locking fixes bochs: - convert to gem/shmem from simpledrm v3d: - support big/super pages - add gemfs vc4: - BCM2712 support refactoring - add YUV444 format support udmabuf: - folio related fixes nouveau: - add panic support on nv50+" * tag 'drm-next-2024-11-21' of https://gitlab.freedesktop.org/drm/kernel: (1583 commits) drm/xe/guc: Fix dereference before NULL check drm/amd: Fix initialization mistake for NBIO 7.7.0 Revert "drm/amd/display: parse umc_info or vram_info based on ASIC" drm/amd/display: Fix failure to read vram info due to static BP_RESULT drm/amdgpu: enable GTT fallback handling for dGPUs only drm/amd/amdgpu: limit single process inside MES drm/fourcc: add AMD_FMT_MOD_TILE_GFX9_4K_D_X drm/amdgpu/mes12: correct kiq unmap latency drm/amdgpu: Support vcn and jpeg error info parsing drm/amd : Update MES API header file for v11 & v12 drm/amd/amdkfd: add/remove kfd queues on start/stop KFD scheduling drm/amdkfd: change kfd process kref count at creation drm/amdgpu: Cleanup shift coding style drm/amd/amdgpu: Increase MES log buffer to dump mes scratch data drm/amdgpu: Implement virt req_ras_err_count drm/amdgpu: VF Query RAS Caps from Host if supported drm/amdgpu: Add msg handlers for SRIOV RAS Telemetry drm/amdgpu: Update SRIOV Exchange Headers for RAS Telemetry Support drm/amd/display: 3.2.309 drm/amd/display: Adjust VSDB parser for replay feature ...
2024-11-14drm/bridge: tc358768: Fix DSI command txFrancesco Dolcini1-2/+19
Wait for the command transmission to be completed in the DSI transfer function polling for the dc_start bit to go back to idle state after the transmission is started. This is documented in the datasheet and failures to do so lead to commands corruption. Fixes: ff1ca6397b1d ("drm/bridge: Add tc358768 driver") Cc: stable@vger.kernel.org Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20240926141246.48282-1-francesco@dolcini.it Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240926141246.48282-1-francesco@dolcini.it
2024-11-05drm/bridge: Add ITE IT6263 LVDS to HDMI converterLiu Ying3-0/+910
Add basic HDMI video output support. Currently, only RGB888 output pixel format is supported. At the LVDS input side, the driver supports single LVDS link and dual LVDS links with "jeida-24" LVDS mapping. Product link: https://www.ite.com.tw/en/product/cate1/IT6263 Signed-off-by: Liu Ying <victor.liu@nxp.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Acked-by: Maxime Ripard <mripard@kernel.org> Tested-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20241104032806.611890-11-victor.liu@nxp.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2024-11-04Merge remote-tracking branch 'drm/drm-next' into drm-misc-nextMaarten Lankhorst2-1/+3
Didn't notice drm/drm-next had the build fix for drm_bridge, so ended up committing the same patch. Sync with drm and pretend it didn't happen? Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2024-11-04drm/bridge: it6505: Fix inverted reset polarityChen-Yu Tsai1-4/+4
The IT6505 bridge chip has a active low reset line. Since it is a "reset" and not an "enable" line, the GPIO should be asserted to put it in reset and deasserted to bring it out of reset during the power on sequence. The polarity was inverted when the driver was first introduced, likely because the device family that was targeted had an inverting level shifter on the reset line. The MT8186 Corsola devices already have the IT6505 in their device tree, but the whole display pipeline is actually disabled and won't be enabled until some remaining issues are sorted out. The other known user is the MT8183 Kukui / Jacuzzi family; their device trees currently do not have the IT6505 included. Fix the polarity in the driver while there are no actual users. Fixes: b5c84a9edcd4 ("drm/bridge: add it6505 driver") Cc: stable@vger.kernel.org Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20241029095411.657616-1-wenst@chromium.org Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
2024-11-04Backmerge v6.12-rc6 of ↵Dave Airlie2-1/+3
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into drm-next Backmerge Linus tree for some drm-fixes needed for msm and xe merges. Signed-off-by: Dave Airlie <airlied@redhat.com>
2024-10-28drm/bridge: tc358767: Fix use of unadjusted mode in the driverMarek Vasut1-1/+1
The driver configures mostly Pixel PLL from the clock cached in local copy of the mode. Make sure the driver uses adjusted mode which contains the updated Pixel PLL settings negotiated in tc_dpi_atomic_check()/tc_edp_atomic_check(). Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Robert Foss <rfoss@kernel.org> Signed-off-by: Robert Foss <rfoss@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20241026041057.247640-1-marex@denx.de
2024-10-24drm/bridge: dw-hdmi: set bridge's ycbcr_420_allowed flagDmitry Baryshkov1-0/+3
Set the drm_bridge's ycbcr_420_allowed flag if the YCbCr 420 output is supported by the hardware. Cc: Alexander Stein <alexander.stein@ew.tq-group.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by: Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20241019-bridge-yuv420-v1-6-d74efac9e4e6@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2024-10-24drm/bridge: aux: allow interlaced and YCbCr 420 outputDmitry Baryshkov2-0/+8
As both aux bridges are merely passthrough bridges, mark them as supporting interlaced and YCbCr 420 data. Other bridges in the chain still might limit interlaced and YCbCr 420 data support on the corresponding connector. Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by: Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20241019-bridge-yuv420-v1-4-d74efac9e4e6@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2024-10-24drm/bridge: display-connector: allow YCbCr 420 for HDMI and DPDmitry Baryshkov1-0/+4
Allow YCbCr 420 output for HDMI and DisplayPort connectors. Other bridges in the chain still might limit YCbCr 420 support on the corresponding connector. Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by: Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20241019-bridge-yuv420-v1-3-d74efac9e4e6@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2024-10-22drm/imx: legacy-bridge: add MODULE_DESCRIPTIONArnd Bergmann1-0/+1
Every module should have a description, without this we get a build time warning. Fixes: cc3e8a216d6b ("drm/imx: add internal bridge handling display-timings DT node") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Robert Foss <rfoss@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20241015073004.4066457-2-arnd@kernel.org
2024-10-21drm/bridge: tc358767: fix missing of_node_put() in for_each_endpoint_of_node()Javier Carrasco1-0/+1
for_each_endpoint_of_node() requires a call to of_node_put() for every early exit. A new error path was added to the loop without observing this requirement. Add the missing call to of_node_put() in the error path. Fixes: 1fb4dceeedc5 ("drm/bridge: tc358767: Add configurable default preemphasis") Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com> Reviewed-by: Marek Vasut <marex@denx.de> Link: https://lore.kernel.org/r/20241013-tc358767-of_node_put-v1-1-97431772c0ff@gmail.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20241013-tc358767-of_node_put-v1-1-97431772c0ff@gmail.com
2024-10-21drm/bridge: Fix assignment of the of_node of the parent to aux bridgeAbel Vesa1-1/+2
The assignment of the of_node to the aux bridge needs to mark the of_node as reused as well, otherwise resource providers like pinctrl will report a gpio as already requested by a different device when both pinconf and gpios property are present. Fix that by using the device_set_of_node_from_dev() helper instead. Fixes: 6914968a0b52 ("drm/bridge: properly refcount DT nodes in aux bridge drivers") Cc: stable@vger.kernel.org # 6.8 Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20241018-drm-aux-bridge-mark-of-node-reused-v2-1-aeed1b445c7d@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20241018-drm-aux-bridge-mark-of-node-reused-v2-1-aeed1b445c7d@linaro.org
2024-10-21drm/bridge: sii902x: Set input bus format based on bus-widthWadim Egorov1-1/+23
Introduce a bus-width property to define the number of parallel RGB input pins connected to the transmitter. The input bus formats are updated accordingly. If the property is not specified, default to 24-bit bus-width. Signed-off-by: Wadim Egorov <w.egorov@phytec.de> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20241017085556.3045686-3-w.egorov@phytec.de Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20241017085556.3045686-3-w.egorov@phytec.de
2024-10-21drm/bridge: ite-it66121: Drop hdmi_avi_infoframe_init() function callLiu Ying1-2/+0
drm_hdmi_avi_infoframe_from_display_mode() called from it66121_bridge_mode_set() already calls hdmi_avi_infoframe_init() to initialize an HDMI AVI infoframe. So, drop the redundant hdmi_avi_infoframe_init() function call from it66121_bridge_mode_set(). Signed-off-by: Liu Ying <victor.liu@nxp.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20241010092643.1048116-1-victor.liu@nxp.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20241010092643.1048116-1-victor.liu@nxp.com
2024-10-21drm/bridge: tc358768: switch to bus-widthKrzysztof Kozlowski1-1/+3
"data-lines" property is way too similar to "data-lanes". It is also duplicating "bus-width" from video-interfaces.yaml schema. "data-lines" was deprecated in the bindings and "bus-width" is preferred, so parse it instead while keeping things backwards compatible. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20241003133904.69244-2-krzysztof.kozlowski@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20241003133904.69244-2-krzysztof.kozlowski@linaro.org
2024-10-19drm/bridge: dpc3433: Constify struct regmap_configJavier Carrasco1-1/+1
`dlpc_regmap_config` is not modified and can be declared as const to move its data to a read-only section. Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240925-drm-const-regmap-v1-1-e609d502401b@gmail.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2024-10-17drm/bridge: synopsys: Add DW HDMI QP TX Controller support libraryCristian Ciocaltea4-0/+1491
The Synopsys DesignWare HDMI 2.1 Quad-Pixel (QP) TX Controller IP supports the following features, among others: * Fixed Rate Link (FRL) * Display Stream Compression (DSC) * 4K@120Hz and 8K@60Hz video modes * Variable Refresh Rate (VRR) including Quick Media Switching (QMS), aka Cinema VRR * Fast Vactive (FVA), aka Quick Frame Transport (QFT) * SCDC I2C DDC access * TMDS Scrambler enabling 2160p@60Hz with RGB/YCbCr4:4:4 * YCbCr4:2:0 enabling 2160p@60Hz at lower HDMI link speeds * Multi-stream audio * Enhanced Audio Return Channel (EARC) Add library containing common helpers to enable basic support, i.e. RGB output up to 4K@30Hz, without audio, CEC or any HDMI 2.1 specific features. Co-developed-by: Algea Cao <algea.cao@rock-chips.com> Signed-off-by: Algea Cao <algea.cao@rock-chips.com> Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com> Acked-by: Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20241016-b4-rk3588-bridge-upstream-v10-1-87ef92a6d14e@collabora.com Signed-off-by: Maxime Ripard <mripard@kernel.org>
2024-10-14Merge drm/drm-next into drm-misc-nextThomas Zimmermann6-6/+6
Backmerging to get fixes from v6.12-rc2. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
2024-10-12drm/bridge: lt9611: use HDMI Connector helper to set InfoFramesDmitry Baryshkov2-55/+120
Use new HDMI Connector helpers in the Lontium LT9611 bridge driver. Program InfoFrames using the helper's callbacks. Also use TMDS char rate validation callback to filter out modes, instead of hardcoding 4k@30. The Audio InfoFrame isn't yet handled by these helpers, it requires additional drm_bridge interface changes. Reviewed-by: Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240615-drm-bridge-hdmi-connector-v1-1-d59fc7865ab2@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2024-10-12drm/bridge: tc358767: Fix link properties discoveryTomi Valkeinen1-0/+7
When a display controller driver uses DRM_BRIDGE_ATTACH_NO_CONNECTOR, tc358767 will behave properly and skip the creation of the connector. However, tc_get_display_props(), which is used to find out about the DP monitor and link, is only called from two places: .atomic_enable() and tc_connector_get_modes(). The latter is only used when tc358767 creates its own connector, i.e. when DRM_BRIDGE_ATTACH_NO_CONNECTOR is _not_ set. Thus, the driver never finds out the link properties before get_edid() is called. With num_lanes of 0 and link_rate of 0 there are not many valid modes... Fix this by adding tc_get_display_props() call at the beginning of get_edid(), so that we have up to date information before looking at the modes. Reported-by: Jan Kiszka <jan.kiszka@siemens.com> Closes: https://lore.kernel.org/all/24282420-b4dd-45b3-bb1c-fc37fe4a8205@siemens.com/ Fixes: de5e6c027ae6 ("drm/bridge: tc358767: add drm_panel_bridge support") Reviewed-by: Aradhya Bhatia <a-bhatia1@ti.com> Tested-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231108-tc358767-v2-2-25c5f70a2159@ideasonboard.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2024-10-10Merge tag 'drm-misc-next-2024-10-09' of ↵Dave Airlie2-0/+4
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next drm-misc-next for v6.13: UAPI Changes: - Add drm fdinfo support to panthor, and add sysfs knob to toggle. Cross-subsystem Changes: - Convert fbdev drivers to use backlight power constants. - Some small dma-fence fixes. - Some kernel-doc fixes. Core Changes: - Small drm client fixes. - Document requirements that you need to file a bug before marking a test as flaky. - Remove swapped and pinned bo's from TTM lru list. Driver Changes: - Assorted small fixes to panel/elida-kd35t133, nouveau, vc4, imx. - Fix some bridges to drop cached edids on power off. - Add Jenson BL-JT60050-01A, Samsung s6e3ha8 & AMS639RQ08 panels. - Make 180° rotation work on ilitek-ili9881c, even for already-rotated panels. - Signed-off-by: Dave Airlie <airlied@redhat.com> # Conflicts: # drivers/gpu/drm/panthor/panthor_drv.c From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/8dc111ca-d20c-4e0d-856e-c12d208cbf2a@linux.intel.com
2024-10-09Merge tag 'drm-misc-next-2024-09-26' of ↵Dave Airlie1-0/+1
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next drm-misc-next for v6.13: UAPI Changes: - panthor: Add realtime group priority and priority query. Cross-subsystem Changes: - Add Vivek Kasireddy as udmabuf maintainer. - Assorted udmabuf changes. - Device tree binding updates. - dmabuf documentation fixes. - Move drm_rect to drm core module from kms helper. Core Changes: - Update scheduler documentation and concurrency fixes. - drm/ci updates. - Add memory-agnostic fbdev client and client-agnostic setup helper. - Huge driver conversion for using the above. Driver Changes: - Assorted fixes to imx, panel/nt35510, sti, accel/ivpu, v3d, vkms, host1x. - Add panel quirks for AYA NEO panels. - Make module autoloading work for bridge/it6505 and mcde. - Add huge page support to v3d using a custom shmfs. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/a9b95e6f-9f35-464e-83f6-bda75b35ee0b@linux.intel.com
2024-10-09Merge tag 'drm-misc-next-2024-09-20' of ↵Dave Airlie14-53/+287
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next drm-misc-next for v6.12: UAPI Changes: - Add panthor/DEV_QUERY_TIMESTAMP_INFO query. Cross-subsystem Changes: - Updated dt bindings. - Add documentation explaining default errnos for fences. - Mark dma-buf heaps creation functions as __init. Core Changes: - Split DSC helpers from DP helpers. - Clang build fixes for drm/mm test. - Remove simple pipeline support for gem-vram, no longer any users left after converting bochs. - Add erno to drm_sched_start to distinguish between GPU and queue reset. - Add drm_framebuffer testcases. - Fix uninitialized spinlock acquisition with CONFIG_DRM_PANIC=n. - Use read_trylock instead of read_lock in dma_fence_begin_signalling to quiesce lockdep. Driver Changes: - Assorted small fixes and updates for tegra, host1x, imagination, nouveau, panfrost, panthor, panel/ili9341, mali, exynos, panel/samsung-s6e3fa7, ast, bridge/ti-sn65dsi86, panel/himax-hx83112a, bridge/tc358767, bridge/imx8mp-hdmi-tx, panel/khadas-ts050, panel/nt36523, panel/sony-acx565akm, kmb, accel/qaic, omap, v3d. - Add bridge/TI TDP158. - Assorted documentation updates. - Convert bochs from simple drm to gem shmem, and check modes against available memory. - Many VC4 fixes, most related to scaling and YUV support. - Convert some drivers to use SYSTEM_SLEEP_PM_OPS and RUNTIME_PM_OPS. - Rockchip 4k@60 support. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/445713a6-2427-4c53-8ec2-3a894ec62405@linux.intel.com
2024-10-03drm/bridge: it6505: Drop EDID cache on bridge power offPin-yen Lin1-0/+2
The bridge might miss the display change events when it's powered off. This happens when a user changes the external monitor when the system is suspended and the embedded controller doesn't not wake AP up. It's also observed that one DP-to-HDMI bridge doesn't work correctly when there is no EDID read after it is powered on. Drop the cache to force an EDID read after system resume to fix this. Fixes: 11feaef69d0c ("drm/bridge: it6505: Add caching for EDID") Signed-off-by: Pin-yen Lin <treapking@chromium.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240926092931.3870342-3-treapking@chromium.org
2024-10-03drm/bridge: anx7625: Drop EDID cache on bridge power offPin-yen Lin1-0/+2
The bridge might miss the display change events when it's powered off. This happens when a user changes the external monitor when the system is suspended and the embedded controller doesn't not wake AP up. It's also observed that one DP-to-HDMI bridge doesn't work correctly when there is no EDID read after it is powered on. Drop the cache to force an EDID read after system resume to fix this. Fixes: 8bdfc5dae4e3 ("drm/bridge: anx7625: Add anx7625 MIPI DSI/DPI to DP") Signed-off-by: Pin-yen Lin <treapking@chromium.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240926092931.3870342-2-treapking@chromium.org
2024-10-03move asm/unaligned.h to linux/unaligned.hAl Viro6-6/+6
asm/unaligned.h is always an include of asm-generic/unaligned.h; might as well move that thing to linux/unaligned.h and include that - there's nothing arch-specific in that header. auto-generated by the following: for i in `git grep -l -w asm/unaligned.h`; do sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i done for i in `git grep -l -w asm-generic/unaligned.h`; do sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i done git mv include/asm-generic/unaligned.h include/linux/unaligned.h git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h
2024-09-30Merge drm/drm-next into drm-misc-nextThomas Zimmermann1-4/+26
Get drm-misc-next to up v6.12-rc1. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
2024-09-23drm/bridge: it6505: Enable module autoloadingLiao Chen1-0/+1
Add MODULE_DEVICE_TABLE(), so modules could be properly autoloaded based on the alias from of_device_id table. Signed-off-by: Liao Chen <liaochen4@huawei.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240902113320.903147-2-liaochen4@huawei.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2024-09-19Merge tag 'drm-next-2024-09-19' of https://gitlab.freedesktop.org/drm/kernelLinus Torvalds10-198/+114
Pull drm updates from Dave Airlie: "This adds a couple of patches outside the drm core, all should be acked appropriately, the string and pstore ones are the main ones that come to mind. Otherwise it's the usual drivers, xe is getting enabled by default on some new hardware, we've changed the device number handling to allow more devices, and we added some optional rust code to create QR codes in the panic handler, an idea first suggested I think 10 years ago :-) string: - add mem_is_zero() core: - support more device numbers - use XArray for minor ids - add backlight constants - Split dma fence array creation into alloc and arm fbdev: - remove usage of old fbdev hooks kms: - Add might_fault() to drm_modeset_lock priming - Add dynamic per-crtc vblank configuration support dma-buf: - docs cleanup buddy: - Add start address support for trim function printk: - pass description to kmsg_dump scheduler: - Remove full_recover from drm_sched_start ttm: - Make LRU walk restartable after dropping locks - Allow direct reclaim to allocate local memory panic: - add display QR code (in rust) displayport: - mst: GUID improvements bridge: - Silence error message on -EPROBE_DEFER - analogix: Clean aup - bridge-connector: Fix double free - lt6505: Disable interrupt when powered off - tc358767: Make default DP port preemphasis configurable - lt9611uxc: require DRM_BRIDGE_ATTACH_NO_CONNECTOR - anx7625: simplify OF array handling - dw-hdmi: simplify clock handling - lontium-lt8912b: fix mode validation - nwl-dsi: fix mode vsync/hsync polarity xe: - Enable LunarLake and Battlemage support - Introducing Xe2 ccs modifiers for integrated and discrete graphics - rename xe perf to xe observation - use wb caching on DGFX for system memory - add fence timeouts - Lunar Lake graphics/media/display workarounds - Battlemage workarounds - Battlemage GSC support - GSC and HuC fw updates for LL/BM - use dma_fence_chain_free - refactor hw engine lookup and mmio access - enable priority mem read for Xe2 - Add first GuC BMG fw - fix dma-resv lock - Fix DGFX display suspend/resume - Use xe_managed for kernel BOs - Use reserved copy engine for user binds on faulting devices - Allow mixing dma-fence jobs and long-running faulting jobs - fix media TLB invalidation - fix rpm in TTM swapout path - track resources and VF state by PF i915: - Type-C programming fix for MTL+ - FBC cleanup - Calc vblank delay more accurately - On DP MST, Enable LT fallback for UHBR<->non-UHBR rates - Fix DP LTTPR detection - limit relocations to INT_MAX - fix long hangs in buddy allocator on DG2/A380 amdgpu: - Per-queue reset support - SDMA devcoredump support - DCN 4.0.1 updates - GFX12/VCN4/JPEG4 updates - Convert vbios embedded EDID to drm_edid - GFX9.3/9.4 devcoredump support - process isolation framework for GFX 9.4.3/4 - take IOMMU mappings into account for P2P DMA amdkfd: - CRIU fixes - HMM fix - Enable process isolation support for GFX 9.4.3/4 - Allow users to target recommended SDMA engines - KFD support for targetting queues on recommended SDMA engines radeon: - remove .load and drm_dev_alloc - Fix vbios embedded EDID size handling - Convert vbios embedded EDID to drm_edid - Use GEM references instead of TTM - r100 cp init cleanup - Fix potential overflows in evergreen CS offset tracking msm: - DPU: - implement DP/PHY mapping on SC8180X - Enable writeback on SM8150, SC8180X, SM6125, SM6350 - DP: - Enable widebus on all relevant chipsets - MSM8998 HDMI support - GPU: - A642L speedbin support - A615/A306/A621 support - A7xx devcoredump support ast: - astdp: Support AST2600 with VGA - Clean up HPD - Fix timeout loop for DP link training - reorganize output code by type (VGA, DP, etc) - convert to struct drm_edid - fix BMC handling for all outputs exynos: - drop stale MAINTAINERS pattern - constify struct loongson: - use GEM refcount over TTM mgag200: - Improve BMC handling - Support VBLANK intterupts - transparently support BMC outputs nouveau: - Refactor and clean up internals - Use GEM refcount over TTM's gm12u320: - convert to struct drm_edid gma500: - update i2c terms lcdif: - pixel clock fix host1x: - fix syncpoint IRQ during resume - use iommu_paging_domain_alloc() imx: - ipuv3: convert to struct drm_edid omapdrm: - improve error handling - use common helper for_each_endpoint_of_node() panel: - add support for BOE TV101WUM-LL2 plus DT bindings - novatek-nt35950: improve error handling - nv3051d: improve error handling - panel-edp: - add support for BOE NE140WUM-N6G - revert support for SDC ATNA45AF01 - visionox-vtdr6130: - improve error handling - use devm_regulator_bulk_get_const() - boe-th101mb31ig002: - Support for starry-er88577 MIPI-DSI panel plus DT - Fix porch parameter - edp: Support AOU B116XTN02.3, AUO B116XAN06.1, AOU B116XAT04.1, BOE NV140WUM-N41, BOE NV133WUM-N63, BOE NV116WHM-A4D, CMN N116BCA-EA2, CMN N116BCP-EA2, CSW MNB601LS1-4 - himax-hx8394: Support Microchip AC40T08A MIPI Display panel plus DT - ilitek-ili9806e: Support Densitron DMT028VGHMCMI-1D TFT plus DT - jd9365da: - Support Melfas lmfbx101117480 MIPI-DSI panel plus DT - Refactor for code sharing - panel-edp: fix name for HKC MB116AN01 - jd9365da: fix "exit sleep" commands - jdi-fhd-r63452: simplify error handling with DSI multi-style helpers - mantix-mlaf057we51: simplify error handling with DSI multi-style helpers - simple: - support Innolux G070ACE-LH3 plus DT bindings - support On Tat Industrial Company KD50G21-40NT-A1 plus DT bindings - st7701: - decouple DSI and DRM code - add SPI support - support Anbernic RG28XX plus DT bindings mediatek: - support alpha blending - remove cl in struct cmdq_pkt - ovl adaptor fix - add power domain binding for mediatek DPI controller renesas: - rz-du: add support for RZ/G2UL plus DT bindings rockchip: - Improve DP sink-capability reporting - dw_hdmi: Support 4k@60Hz - vop: - Support RGB display on Rockchip RK3066 - Support 4096px width sti: - convert to struct drm_edid stm: - Avoid UAF wih managed plane and CRTC helpers - Fix module owner - Fix error handling in probe - Depend on COMMON_CLK - ltdc: - Fix transparency after disabling plane - Remove unused interrupt tegra: - gr3d: improve PM domain handling - convert to struct drm_edid - Call drm_atomic_helper_shutdown() vc4: - fix PM during detect - replace DRM_ERROR() with drm_error() - v3d: simplify clock retrieval v3d: - Clean up perfmon virtio: - add DRM capset" * tag 'drm-next-2024-09-19' of https://gitlab.freedesktop.org/drm/kernel: (1326 commits) drm/xe: Fix missing conversion to xe_display_pm_runtime_resume drm/xe/xe2hpg: Add Wa_15016589081 drm/xe: Don't keep stale pointer to bo->ggtt_node drm/xe: fix missing 'xe_vm_put' drm/xe: fix build warning with CONFIG_PM=n drm/xe: Suppress missing outer rpm protection warning drm/xe: prevent potential UAF in pf_provision_vf_ggtt() drm/amd/display: Add all planes on CRTC to state for overlay cursor drm/i915/bios: fix printk format width drm/i915/display: Fix BMG CCS modifiers drm/amdgpu: get rid of bogus includes of fdtable.h drm/amdkfd: CRIU fixes drm/amdgpu: fix a race in kfd_mem_export_dmabuf() drm: new helper: drm_gem_prime_handle_to_dmabuf() drm/amdgpu/atomfirmware: Silence UBSAN warning drm/amdgpu: Fix kdoc entry in 'amdgpu_vm_cpu_prepare' drm/amd/amdgpu: apply command submission parser for JPEG v1 drm/amd/amdgpu: apply command submission parser for JPEG v2+ drm/amd/pm: fix the pp_dpm_pcie issue on smu v14.0.2/3 drm/amd/pm: update the features set on smu v14.0.2/3 ...
2024-09-17Merge tag 'sound-6.12-rc1' of ↵Linus Torvalds1-4/+26
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "A fairly big update at this time, both in core and driver sides. The core received rewrites in PCM buffer allocation handling and locking optimizations, PCM rate updates followed by lots of cleanups. In ASoC side, the legacy Intel drivers have been deprecated by AVS drivers which leaded to the significant amount of code reduction. SoundWire driver updates and other cleanups contributed more code reduction, too. USB-audio driver received a large cleanup of its big quirk table, and the old snd_print*() API usages in many legacy drivers are replaced with the standard print API. Here are some highlights: Core: - More optimized locking in ALSA control code - Rewrites of memalloc helpers for better DMA API usage - Drop of obsoleted vmalloc PCM buffer helper API - Continued MIDI2 UMP updates - Support of a new user-space driven timer instance - Update for more PCM support rates and cleanups - Xrun counter report in the proc files ASoC: - Continued simplification and cleanup works for ASoC - Extensive cleanups and refactoring of the Soundwire drivers - Removal of Intel machine support obsoleted by the AVS driver - Lots of DT schema conversions - Machine support for many AMD and Intel x86 platforms - Support for AMD ACP 7.1, Mediatek MT6367 and MT8365, Realtek RTL1320 SoundWire and rev C, and Texas Instruments TAS2563 USB-audio: - Add support of multiple control interfaces - A large rewrite of quirk table with macros - Support for RME Digiface USB HD-audio: - Cleanup of quirk code for Samsung Galaxy laptops - Clean up of detection of Cirrus codecs - C-Media CM9825 HD-audio codec support Others: - Rewrites to standard print API in a lot of legacy drivers" * tag 'sound-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (410 commits) ASoC: topology: Fix redundant logical jump ASoC: tas2781: Add Calibration Kcontrols for Chromebook ASoC: amd: acp: refactor SoundWire machine driver code ASoC: sdw_utils/intel: move soundwire endpoint parsing helper functions ASoC: sdw_util/intel: move soundwire endpoint and dai link structures ASoC: intel: sof_sdw: rename soundwire parsing helper functions ASoC: intel: sof_sdw: rename soundwire endpoint and dailink structures ASoC: atmel: mchp-pdmc: Retain Non-Runtime Controls ALSA: hda/realtek: Add support for Galaxy Book2 Pro (NP950XEE) ASoC: mediatek: mt7986-afe-pcm: Remove redundant error message ALSA: memalloc: Use proper DMA mapping API for x86 S/G buffer allocations ALSA: memalloc: Use proper DMA mapping API for x86 WC buffer allocations ALSA: usb-audio: Add logitech Audio profile quirk ASoc: mediatek: mt8365: Remove unneeded assignment ASoC: Intel: ARL: Add entry for HDMI-In capture support to non-I2S codec boards. ASoC: Intel: sof_rt5682: Add HDMI-In capture with rt5682 support for ARL. ASoC: SOF: Intel: hda: remove common_hdmi_codec_drv ASoC: Intel: sof_pcm512x: do not check common_hdmi_codec_drv ASoC: Intel: ehl_rt5660: do not check common_hdmi_codec_drv ASoC: Intel: skl_hda_dsp_generic: use common module for DAI links ...
2024-09-13drm/bridge: imx8mp-hdmi-tx: allow 0.5% margin with selected clockDominique Martinet1-2/+9
This allows the hdmi driver to pick e.g. 64.8MHz instead of 65Mhz when we cannot output the exact frequency, enabling the imx8mp HDMI output to support more modes Tested-by: Adam Ford <aford173@gmail.com> #imx8mp-beacon Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de> Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de> Signed-off-by: Dominique Martinet <dominique.martinet@atmark-techno.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20240907-hdmi-tolerance-v2-1-b9d7abd89f5c@codewreck.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240907-hdmi-tolerance-v2-1-b9d7abd89f5c@codewreck.org
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-29 17:40:51 +0300