summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/ast/ast_drv.h
AgeCommit message (Collapse)AuthorFilesLines
2021-07-19drm/ast: Fixed CVE for DP501KuoHsiang Chou1-0/+12
[ Upstream commit ba4e0339a6a33e2ba341703ce14ae8ca203cb2f1 ] [Bug][DP501] If ASPEED P2A (PCI to AHB) bridge is disabled and disallowed for CVE_2019_6260 item3, and then the monitor's EDID is unable read through Parade DP501. The reason is the DP501's FW is mapped to BMC addressing space rather than Host addressing space. The resolution is that using "pci_iomap_range()" maps to DP501's FW that stored on the end of FB (Frame Buffer). In this case, FrameBuffer reserves the last 2MB used for the image of DP501. Signed-off-by: KuoHsiang Chou <kuohsiang_chou@aspeedtech.com> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210421085859.17761-1-kuohsiang_chou@aspeedtech.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-09-16drm/ast: Disable planes while switching display modesThomas Zimmermann1-0/+2
The ast HW cursor requires the primary plane and CRTC to display at a valid mode and format. This is not the case while switching display modes, which can lead to the screen turing permanently dark. As a workaround, the ast driver now disables active planes while the mode or format switch takes place. It also synchronizes with the vertical refresh to give CRTC and planes some time to catch up on each other. The active planes planes (primary or cursor) will be re-enabled by each plane's atomic_update() function. v3: * move the logic into the CRTC's atomic_disable function v2: * move the logic into the commit-tail function Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20200914072236.19398-3-tzimmermann@suse.de
2020-08-03drm/ast: Managed device releaseThomas Zimmermann1-1/+0
This turns the ast's device cleanup code into a managed release helper function. Note that the code uses devres helpers. The release function switches the device back to VGA mode and therefore runs during HW device cleanup; not at DRM device cleanup. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20200730135206.30239-10-tzimmermann@suse.de
2020-08-03drm/ast: Managed release of ast firmwareThomas Zimmermann1-1/+0
The ast driver loads firmware for the DP501 display encoder. The patch replaces the removal code with a managed release function. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200730135206.30239-8-tzimmermann@suse.de
2020-08-03drm/ast: Embed struct drm_device in struct ast_privateThomas Zimmermann1-2/+2
Turns struct ast_private into a subclass of struct drm_device by embedding the latter. This allows for using DRM's managed device allocation. The use of struct drm_device.dev_private is deprecated. The patch converts the last remaining users to to_ast_private(). Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200730135206.30239-7-tzimmermann@suse.de
2020-08-03drm/ast: Replace driver load/unload functions with device create/destroyThomas Zimmermann1-2/+4
The ast driver's load and unload functions are left-overs from when struct drm_driver.load/unload was still in use. The PCI probe helper allocated the DRM device and ran load to initialize it. This patch replaces this code with device create and destroy. The main difference is that the device's create function allocates the DRM device and ast structures in the same place. This will be required for switching ast to managed allocations. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200730135206.30239-4-tzimmermann@suse.de
2020-08-03drm/ast: Embed CRTC and connector in struct ast_privateThomas Zimmermann1-14/+19
Only single instances of CRTC and connector are supported per device. Embed both in ast's structure and remove the individual memory allocations. DRM's CRTC cleanup helpers replace the rsp. destroy function in ast. While at it, also convert to_ast_connector() to a function. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200730135206.30239-2-tzimmermann@suse.de
2020-07-20drm/ast: Use managed MM initializationThomas Zimmermann1-1/+0
Cleaning up ast's MM code with ast_mm_fini() resets the write-combine flags on the VRAM I/O memory. Drop ast_mm_fini() in favor of an auto- release callback. Releasing the device also executes the callback. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200716125353.31512-7-tzimmermann@suse.de
2020-07-20drm/ast: Move VRAM size detection to ast_mm.cThomas Zimmermann1-1/+0
VRAM size detection is only relevant to the memory management. Move the code into ast_mm.c. While at it, rename the function to ast_get_vram_size(). The function argument's type is now struct ast_private. The result is stored in a local variable and not in struct ast_private any longer. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200716125353.31512-5-tzimmermann@suse.de
2020-07-07drm/ast: Initialize mode setting in ast_mode_config_init()Thomas Zimmermann1-1/+1
There's modesetting init code in ast_main.c. Move it to ast_mode.c and merge it with the modesetting init code in ast_mode_init(). The result is ast_mode_config_init(), which initalizes the whole modesetting. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200702115029.5281-15-tzimmermann@suse.de
2020-07-07drm/ast: Use managed mode-config initThomas Zimmermann1-1/+0
Using drmm_mode_config_init() sets up managed release of modesetting resources. The existing modesetting's finalizer is empty, so remove it. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200702115029.5281-14-tzimmermann@suse.de
2020-07-07drm/ast: Replace struct ast_crtc with struct drm_crtcThomas Zimmermann1-5/+0
Struct ast_crtc has been cleaned up and it's now a wrapper around the DRM CRTC structure struct drm_crtc. This patch converts the driver to struct drm_crtc and removes struct ast_crtc. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200702115029.5281-13-tzimmermann@suse.de
2020-07-07drm/ast: Managed cursor releaseThomas Zimmermann1-1/+0
Register a release function to finalize cursors. The _fini() function gets un-exported from the source file. The function ast_mode_fini() is now empty and will be removed by a later patch. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200702115029.5281-11-tzimmermann@suse.de
2020-07-07drm/ast: Keep cursor HW BOs mappedThomas Zimmermann1-2/+3
Updating the image in a cursor's HW BO requires a mapping of the BO's buffer in the kernel's address space. Cursor image updates can happen frequently and create CPU overhead. As cursor HW BOs are small and never move, they are now map exactly once during the initialization and the mapping is used throughout the driver's lifetime. This change also removes a possible source of failures from ast_cursor_show(). As the helper does not establish mappings, it cannot fail. As a result, the cursor plane's atomic-update helper does not call any failable interfaces. All failures are detected before trying to update the cursor plane. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200702115029.5281-10-tzimmermann@suse.de
2020-07-07drm/ast: Add helper to hide cursorThomas Zimmermann1-0/+1
As the inverse to ast_cursor_show(), ast_cursor_hide() disables the HW cursor. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200702115029.5281-9-tzimmermann@suse.de
2020-07-07drm/ast: Replace ast_cursor_move() with ast_cursor_show()Thomas Zimmermann1-2/+2
Having a cursor move function is misleading, as it actually enables the cursor's image for displaying. So rename it to ast_cursor_show(). It's semantics is to show a cursor at the specified location on the screen. The displayed cursor is always the image in the cursor front BO. This change also simplifies struct ast_crtc to being a mere wrapper around around struct drm_crtc. It will be removed by a later patch. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200702115029.5281-7-tzimmermann@suse.de
2020-07-07drm/ast: Move cursor pageflip into helperThomas Zimmermann1-1/+1
The new helper ast_cursor_page_flip() switches the cursor's front and back BOs. This simplifies the cursor plane's update helper. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200702115029.5281-6-tzimmermann@suse.de
2020-07-07drm/ast: Move cursor fb pinning and mapping into helperThomas Zimmermann1-2/+1
The new helper ast_cursor_blit() updates a cursor's backbuffer HW BO from a framebuffer structure. The cursor plane's prepare_fb() function now uses the new interface. Pinning and mapping of BOs is done automatically by the helper. This includes the source BO, which was not pinned by the original code in prepare_fb(). Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200702115029.5281-4-tzimmermann@suse.de
2020-07-07drm/ast: Pass struct ast_private instance to cursor init/fini functionsThomas Zimmermann1-2/+2
Removes some typecasting. v2: * use to_ast_private() instead of struct drm_device.dev_private Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200702115029.5281-3-tzimmermann@suse.de
2020-07-07drm/ast: Move cursor functions to ast_cursor.cThomas Zimmermann1-0/+9
The cursor manipulation functions are unrelated to modesetting. Move them into their own file. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200702115029.5281-2-tzimmermann@suse.de
2020-06-22drm/ast: Upcast from DRM device to ast structure via to_ast_private()Thomas Zimmermann1-0/+5
All upcasting from struct drm_device to struct ast_private is now performed via to_ast_private(). Using struct drm_device.dev_private is deprecated. The ast variable in ast_crtc_helper_atomic_check() is unused, so removed it. v2: * fix typo in commit message Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200617080340.29584-4-tzimmermann@suse.de
2020-06-22drm/ast: Remove unused code paths for AST 1180Thomas Zimmermann1-2/+0
The ast driver contains code paths for AST 1180 chips. The chip is not supported and the rsp code has never been tested. Simplify the driver by removing the AST 1180 code. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200617080340.29584-2-tzimmermann@suse.de
2020-03-02drm/ast: Use simple encoderThomas Zimmermann1-5/+1
The ast driver uses an empty implementation for its encoder. Replace the code with the generic simple encoder. v2: * rebase onto new simple-encoder interface Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200228081828.18463-3-tzimmermann@suse.de
2019-12-10drm/ast: Store primary-plane format in struct ast_crtc_stateThomas Zimmermann1-0/+3
Reading the primary plane's framebuffer from the CRTC's atomic_flush() function is fragile as the plane state or framebuffer can be NULL. Instead, we let the plane's atomic_check() store the framebuffer format in the CRTC state. The CRTC always receives the framebuffer format that is currently programmed, or NULL if no mode has been set yet. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191202111557.15176-8-tzimmermann@suse.de
2019-12-10drm/ast: Store VBIOS mode info in struct ast_crtc_stateThomas Zimmermann1-0/+2
After looking up VBIOS mode information in CRTC's atomic_check(), we can reuse it in atomic_flush(). No need for a second look-up. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191202111557.15176-7-tzimmermann@suse.de
2019-12-10drm/ast: Introduce struct ast_crtc_stateThomas Zimmermann1-0/+6
AST-specific CRTC state can be placed in the new struct ast_crtc_state. The atomic check functions of the CRTC and the primary plane will store the VBIOS mode info and the framebuffer format here. The CRTC will consume these during atomic_flush(). Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191202111557.15176-6-tzimmermann@suse.de
2019-11-08drm/ast: Add cursor planeThomas Zimmermann1-0/+1
The cursor plane uses an internal format of ARGB4444. To userspace, we announce ARGB8888 and do the transformation internally. v2: * don't set plane call-back functions to NULL explicitly * define plane format array in global scope Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191107083404.6852-9-tzimmermann@suse.de
2019-11-08drm/ast: Add primary planeThomas Zimmermann1-0/+2
Like the original mode-setting code, the primary plane supports XRGB888, RGB565 and C8. The plane itself only pins BOs and sets the base address and scanline offset. The mode-setting code will be located in the CRTC's atomic helpers. v2: * don't set plane call-back functions to NULL explicitly * define plane format array in global scope Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191107083404.6852-7-tzimmermann@suse.de
2019-11-08drm/ast: Remove last traces of struct ast_gem_objectThomas Zimmermann1-6/+0
The ast driver has switched to struct drm_vram_gem_object a while ago. This patch removes a function and forward declaration that were forgotten before. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191107083404.6852-2-tzimmermann@suse.de
2019-10-04drm/ast: Allocate cursor BOs at high end of video memoryThomas Zimmermann1-19/+24
By putting cursor BOs at the high end of the video memory, we can avoid memory fragmentation. Starting at the low end, contiguous video memory is available for framebuffers. The patch also simplifies the buffer swapping by splitting struct ast_private.cursor_cache BO into two separate boffer objects. Cursor images alternate between these buffers instead of offsets within cursor_cache. v3: * fixes space-before-tab error near AST_HWC_SIGNATURE_CHECKSUM Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190927090309.10254-6-tzimmermann@suse.de
2019-07-15drm/ast: drop use of drmP.hSam Ravnborg1-8/+9
Drop use of the deprecated drmP.h header file. While touching the files divide include files in blocks and sort the include files in the individual blocks. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Emil Velikov <emil.velikov@collabora.com> Cc: Dave Airlie <airlied@redhat.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: "Christian König" <christian.koenig@amd.com> Cc: Sam Bobroff <sbobroff@linux.ibm.com> Cc: YueHaibing <yuehaibing@huawei.com> Cc: Huang Rui <ray.huang@amd.com> Cc: "Y.C. Chen" <yc_chen@aspeedtech.com> Cc: Hans de Goede <hdegoede@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190630061922.7254-33-sam@ravnborg.org
2019-07-09drm/ast: Replace struct ast_fbdev with generic framebuffer emulationThomas Zimmermann1-17/+0
This patch replaces ast's framebuffer console with DRM's generic implememtation. All respective code is being removed from the driver. The console is set up with a shadow buffer. The actual buffer object is not permanently pinned in video ram, but just another buffer object that the driver moves in and out of vram as necessary. The driver's function ast_crtc_do_set_base() used to contain special handling for the framebuffer console. With the new generic framebuffer, the driver does not need this code an longer. v2: * use drm_fb_helper_set_suspend_unlocked() in ast_drm_{thaw,freeze}() * dirty function no longer required Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Noralf Trønnes <noralf@tronnes.org> Link: https://patchwork.freedesktop.org/patch/315835/
2019-06-28drm/ast: Replace struct ast_framebuffer with GEM framebuffer helpersThomas Zimmermann1-12/+0
The ast driver's struct ast_framebuffer is a buffer object with GEM interface. There are already GEM framebuffer helpers that implement the same functionality. Convert ast to these. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20190627173410.8300-1-tzimmermann@suse.de
2019-06-13drm/ast: Remove obsolete or unused cursor stateThomas Zimmermann1-7/+0
The ast driver's data structures store unused or uncecessary cursor state. Most of the cursor state is already stored elsewhere and can be retrieved when necessary. Remove the obsolete fields and adapt users accordingly. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190613073041.29350-4-tzimmermann@suse.de
2019-05-15drm/ast: Replace mapping code with drm_gem_vram_{kmap/kunmap}()Thomas Zimmermann1-1/+0
The AST driver establishes several memory mappings for frame buffers and cursors. This patch converts the driver to use the equivalent drm_gem_vram_kmap() functions. It removes the dependencies on TTM and cleans up the code. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: http://patchwork.freedesktop.org/patch/msgid/20190508082630.15116-12-tzimmermann@suse.de Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-05-15drm/ast: Convert AST driver to VRAM MMThomas Zimmermann1-16/+2
The data structure |struct drm_vram_mm| and its helpers replace ast's TTM-based memory manager. It's the same implementation; except for the type names. v4: * don't select DRM_TTM or DRM_VRAM_MM_HELPER v3: * use drm_gem_vram_mm_funcs * convert driver to drm_device-based instance v2: * implement ast_mmap() with drm_vram_mm_mmap() Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: http://patchwork.freedesktop.org/patch/msgid/20190508082630.15116-11-tzimmermann@suse.de Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-05-15drm/ast: Convert AST driver to |struct drm_gem_vram_object|Thomas Zimmermann1-51/+1
The data structure |struct drm_gem_vram_object| and its helpers replace |struct ast_bo|. It's the same implementation; except for the type names. v4: * cleanups from checkpatch.pl Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: http://patchwork.freedesktop.org/patch/msgid/20190508082630.15116-10-tzimmermann@suse.de Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-04-03Merge branch 'drm-next-5.2' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie1-2/+0
into drm-next amdgpu: - Switch to HMM for userptr (reverted until HMM fixes land) - New experimental SMU 11 replacement for powerplay for vega20 (not enabled by default) - Initial RAS support for vega20 - BACO support for vega12 - BACO fixes for vega20 - Rework IH handling for page fault and retry interrupts - Cleanly split CPU and GPU paths for GPUVM updates - Powerplay fixes - XGMI fixes - Rework how DC interacts with atomic for planes - Clean up and simplify DC/Powerplay interfaces - Misc cleanups and bug fixes amdkfd: - Switch to HMM for userptr (reverted until HMM fixes land) - Add initial RAS support - MQD fixes ttm: - Unify DRM_FILE_PAGE_OFFSET handling - Account for kernel allocations in kernel zone only - Misc cleanups Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190402170820.22197-1-alexander.deucher@amd.com
2019-03-27drm/ast: Use drm_fb_helper_fill_infoDaniel Vetter1-1/+1
Should not result in any changes. v2: Rebase Acked-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Dave Airlie <airlied@redhat.com> Cc: Junwei Zhang <Jerry.Zhang@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Sean Paul <sean@poorly.run> Cc: YueHaibing <yuehaibing@huawei.com> Cc: Sam Bobroff <sbobroff@linux.ibm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190326132008.11781-6-daniel.vetter@ffwll.ch
2019-03-19drm/ttm: Define a single DRM_FILE_PAGE_OFFSET constantThomas Zimmermann1-2/+0
Most TTM drivers define the constant DRM_FILE_PAGE_OFFSET of the same value. The only exception is vboxvideo, which is being converted to the new offset by this patch. Unifying the constants in a single place simplifies the driver code. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Christian König <christian.koenig@amd.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-05drm/ttm: initialize globals during device init (v2)Christian König1-1/+0
Make sure that the global BO state is always correctly initialized. This allows removing all the device code to initialize it. v2: fix up vbox (Alex) Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-05drm/ttm: use a static ttm_mem_global instanceChristian König1-1/+0
As the name says we only need one global instance of ttm_mem_global. Drop all the driver initialization and just use a single exported instance which is initialized during BO global initialization. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-08-10Merge tag 'drm-misc-next-2017-08-08' of ↵Dave Airlie1-1/+0
git://anongit.freedesktop.org/git/drm-misc into drm-next UAPI Changes: - vc4: Add ioctl to allow attaching a label to a bo (Eric) - Add new format/modifier blob plane property (Ben) - armada: Use __u32/__u64 instead of uint32_t/uint64_t (Mikko) - [kinda uapi] fb_helper: Expose display_info size via fb_info (David) Core Changes: - Default gem_dumb_[map_offset|destroy] as mmap/destroy implementations (Noralf) - Simplify atomic properties by removing the helpers and handling in core (Daniel) Driver Changes: - stm: Add STM32 DSI controller driver (Phillipe) - vc4: Add HDMI CEC support (Hans) - rockchip: Refactor register init & soc version handling (Mark) - misc: Remove .load_lut, .gamma_set, .gamma_get dead code (Peter) - dw-hdmi: Add HDMI CEC support (Russell) Cc: Philippe CORNU <philippe.cornu@st.com> Cc: Hans Verkuil <hans.verkuil@cisco.com> Cc: Eric Anholt <eric@anholt.net> Cc: Noralf Trønnes <noralf@tronnes.org> Cc: Ben Widawsky <ben@bwidawsk.net> Cc: Mark yao <mark.yao@rock-chips.com> Cc: Peter Rosin <peda@axentia.se> Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Mikko Rapeli <mikko.rapeli@iki.fi> Cc: David Lechner <david@lechnology.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> * tag 'drm-misc-next-2017-08-08' of git://anongit.freedesktop.org/git/drm-misc: (107 commits) drm: Nuke drm_atomic_legacy_backoff drm: Nuke drm_atomic_helper_connector_dpms drm: Nuke drm_atomic_helper_connector_set_property drm: Nuke drm_atomic_helper_plane_set_property drm: Nuke drm_atomic_helper_crtc_set_property drm: Handle properties in the core for atomic drivers drm: Don't update property values for atomic drivers drm/omap: Rework the rotation-on-crtc hack drm/radeon: Use the drm_driver.dumb_destroy default drm/i915: Use the drm_driver.dumb_destroy default drm/sti: Use .dumb_map_offset and .dumb_destroy defaults drm: bridge: synopsys/dw-hdmi: Provide default configuration function for HDMI 2.0 PHY drm/fb-helper: pass physical dimensions to fbdev uapi drm/armada_drm.h: use __u32 and __u64 instead of uint32_t and uint64_t drm/bridge: dw-hdmi: remove CEC engine register definitions drm/bridge: dw-hdmi: add cec driver drm/bridge: dw-hdmi: add missing cec_notifier_put drm: remove unused and redundant callbacks staging: vboxvideo: remove dead gamma lut code drm: dw-hdmi-i2s: add missing company name on Copyright ...
2017-08-04drm: ast: remove dead code and pointless local lut storagePeter Rosin1-1/+0
The redundant fb helpers .load_lut, .gamma_set and .gamma_get are no longer used. Remove the dead code and hook up the crtc .gamma_set to use the crtc gamma_store directly instead of duplicating that info locally. Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20170713162538.22788-7-peda@axentia.se
2017-08-02drm/ast: Actually load DP501 firmware when requiredEgbert Eich1-2/+1
The ast driver has a code to load the DP501 firmware, but it's never used. This patch implements its actual usage by requesting the firmware on demand, and release the firmware at exit as well. Also the path contains a few cleanups and makes relevant functions static. Signed-off-by: Egbert Eich <eich@suse.de> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Dave Airlie <airlied@redhat.com>
2017-02-28drm/ast: Base support for AST2500Y.C. Chen1-0/+2
Add detection and mode setting updates for AST2500 generation chip, code originally from Aspeed and slightly reworked for coding style mostly by Ben. This doesn't contain the BMC DRAM POST code which is in a separate patch. Signed-off-by: Y.C. Chen <yc_chen@aspeedtech.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Dave Airlie <airlied@redhat.com>
2017-02-28drm/ast: const'ify mode setting tablesBenjamin Herrenschmidt1-2/+2
And fix some comment alignment & space/tabs while at it Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Dave Airlie <airlied@redhat.com>
2017-02-28drm/ast: Handle configuration without P2A bridgeRussell Currey1-1/+5
The ast driver configures a window to enable access into BMC memory space in order to read some configuration registers. If this window is disabled, which it can be from the BMC side, the ast driver can't function. Closing this window is a necessity for security if a machine's host side and BMC side are controlled by different parties; i.e. a cloud provider offering machines "bare metal". A recent patch went in to try to check if that window is open but it does so by trying to access the registers in question and testing if the result is 0xffffffff. This method will trigger a PCIe error when the window is closed which on some systems will be fatal (it will trigger an EEH for example on POWER which will take out the device). This patch improves this in two ways: - First, if the firmware has put properties in the device-tree containing the relevant configuration information, we use these. - Otherwise, a bit in one of the SCU scratch registers (which are readable via the VGA register space and writeable by the BMC) will indicate if the BMC has closed the window. This bit has been defined by Y.C Chen from Aspeed. If the window is closed and the configuration isn't available from the device-tree, some sane defaults are used. Those defaults are hopefully sufficient for standard video modes used on a server. Signed-off-by: Russell Currey <ruscur@russell.cc> Acked-by: Joel Stanley <joel@jms.id.au> Cc: <stable@vger.kernel.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2017-02-23Merge tag 'v4.10-rc8' into drm-nextDave Airlie1-0/+1
Linux 4.10-rc8 Backmerge Linus rc8 to fix some conflicts, but also to avoid pulling it in via a fixes pull from someone.
2017-01-27drm/ast: Fixed system hanged if disable P2AY.C. Chen1-0/+1
The original ast driver will access some BMC configuration through P2A bridge that can be disabled since AST2300 and after. It will cause system hanged if P2A bridge is disabled. Here is the update to fix it. Signed-off-by: Y.C. Chen <yc_chen@aspeedtech.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-04-30 06:55:43 +0300