summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd
AgeCommit message (Collapse)AuthorFilesLines
2024-07-24drm/amd/display: Disable subvp based on HW cursor requirementAlvin Lee3-1/+11
[Description] - There are situations where HW cursor is required - In these scenarios we should disable subvp based on the HW cursor requirement Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Jerry Zuo <jerry.zuo@amd.com> Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-24drm/amd/display: When resync fifo ensure to use correct pipe ctxAlvin Lee6-12/+30
We resync the FIFO after each pipe update in apply_ctx_to_hw. However, this means that some pipes (in hardware) are based on the new context and some are based on the current_state (since the pipes are updated on at a time). In this case we must ensure to use the pipe_ctx that's currently still configured in hardware when turning off / on OTG's and reconfiguring ODM during the resync. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Jerry Zuo <jerry.zuo@amd.com> Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-24drm/amd/display: Add option to allow transition when odm is forcedSridevi Arvindekar2-1/+8
Added option to allow transition for forced odm. Add the variation to the nightly run. Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Jerry Zuo <jerry.zuo@amd.com> Signed-off-by: Sridevi Arvindekar <sarvinde@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-24drm/amd/display: avoid disable otg when dig was disabledJingwen Zhu3-3/+25
[Why] This is a workaround for an dcn3.1 hang that happens if otg dispclk is ramped while otg is on and stream enc is off. But this w/a should not trigger when we have a dig active. [How] Avoid disable otg when dig FE/BE FIFO was not switched. Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Jerry Zuo <jerry.zuo@amd.com> Signed-off-by: Jingwen Zhu <jingwen.zhu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-24drm/amd/display: Implement bias and scale pre sclRelja Vojvodic7-14/+43
why: New scaler needs the input to be full range color space. This will also fix issues that come up due to not having a predefined limited color space matrix for certain color spaces how: Use bias and scale HW to expand the range of limited color spaces to full before the scaler Reviewed-by: Krunoslav Kovac <krunoslav.kovac@amd.com> Signed-off-by: Jerry Zuo <jerry.zuo@amd.com> Signed-off-by: Relja Vojvodic <relja.vojvodic@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-24drm/amd/display: apply vmin optimization even if it doesn't reach vmin levelWenjing Liu2-7/+20
[why] Based on power measurement result, in most cases when display clock is higher than Vmin display clock, lowering display clock using dynamic ODM will improve overall power consumption by 0 to 4 watts even if we can't reach Vmin. [how] Allow vmin optimization applied even if dispclk can't reach Vmin. Reviewed-by: Jun Lei <jun.lei@amd.com> Signed-off-by: Jerry Zuo <jerry.zuo@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-24drm/amd/display: fix dscclk programming sequence on DCN401Wenjing Liu8-59/+58
[why] The mux to switch between refclk and dto_dsc_clk is non double buffered. However dto dsc clk's phase and modulo divider registers are currently configured as double buffered update. This causes a problem when we switch to use dto dsc clk and program phase and modulo in the same sequence. In this sequence dsc clk is switched to dto but the clock divider programming doesn't take effect until next frame. When we try to program DSCC registers, SMN bus will hang because dto dsc clk divider phase is set to 0. [how] Configure phase and modulo to take effect immediately. Always switch to dto dsc clk before DSC clock is unagted. Switch back to refclk after DSC clock is gated. Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Reviewed-by: Jerry Zuo <jerry.zuo@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-24drm/amd/display: Revert "Check HDCP returned status"Alex Hung1-9/+9
This reverts commit 5d93060d430b359e16e7c555c8f151ead1ac614b due to a power consumption regression. Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Jerry Zuo <jerry.zuo@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-24drm/amd/display: Replace assert with error message in dp_retrieve_lttpr_cap()Roman Li1-1/+5
[Why] When assert in dp_retrieve_lttpr_cap() is hit, dmesg has traces like: RIP: 0010:dp_retrieve_lttpr_cap+0xcc/0x1a0 [amdgpu] Call Trace: <TASK> dp_retrieve_lttpr_cap+0xcc/0x1a0 [amdgpu] report_bug+0x1e8/0x240 handle_bug+0x46/0x80 link_detect+0x35/0x580 [amdgpu] It happens when LTTPRs fail to increment dpcd repeater count. We have a recovery action in place for such cases. Assert is misleading, an indicative error in dmesg is more useful. [How] Remove ASSERT and use DC_LOG_ERROR instead. Reviewed-by: Michael Strauss <michael.strauss@amd.com> Signed-off-by: Jerry Zuo <jerry.zuo@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-24drm/amd/display: Added logging for automated DPM testingRyan Seto7-57/+237
[Why] Added clock logs to automate DPM testing [How] Added logs and helper functions to output clocks Co-authored-by: Ryan Seto <ryanseto@amd.com> Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Jerry Zuo <jerry.zuo@amd.com> Signed-off-by: Ryan Seto <ryanseto@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-24drm/amd/display: Don't consider cursor for no plane case in DML1Alvin Lee1-0/+2
[Description] For no plane scenarios we should not consider cursor as there cannot be any cursor if there's no planes. This fixes an issue where dc_commit_streams fails due to prefetch bandwidth requirements (the display config + dummy planes + cursor causes the prefetch bandwidth to exceed what is possible). Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com> Signed-off-by: Jerry Zuo <jerry.zuo@amd.com> Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-24drm/amd/display: quality improvements for EASF and ISHARPSamson Tam19-710/+3161
[Why] Update coefficients and LUT tables for scaler and sharpener to improve quality and support different use cases (SDR/HDR) [How] Move scaler coefficients to new file dc_spl_scl_easf_filters.c Remove older coefficients file dc_sp_scl_filters_old.c Update default taps for EASF support Update LLS policy for DON'T CARE case Update cositing offset from 0.5 to 0.25 Add support to adjust sharpness based on level, use case, and scaling ratio ( using discrete levels ) Apply sharpness to all RGB surfaces and both NV12 and P010 video ( in fullscreen only ). Upscale and 1:1 ratios only Enable scaler when sharpening 1:1 ratios Add support for coefficients that are in S1.10 format (convert to S1.12 format) Reviewed-by: Jun Lei <jun.lei@amd.com> Signed-off-by: Jerry Zuo <jerry.zuo@amd.com> Signed-off-by: Samson Tam <samson.tam@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-24drm/amd/display: Disable HBR audio for DP2 for certain ASICsAlvin Lee9-0/+19
[Description] Due to a HW bug, HBR audio is not supported for DP2 encoders for certain ASICs. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Jerry Zuo <jerry.zuo@amd.com> Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-24drm/amd/display: Disable replay if VRR capability is falseTom Chung1-0/+6
[Why] The VRR need to be supported for panel replay feature. If VRR capability is false, panel replay capability also need to be disabled. [How] After update the vrr capability, the panel replay capability also need to be check if need. Reviewed-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Jerry Zuo <jerry.zuo@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-24drm/amdgpu: add print support for sdma_v_5_0 ip_dumpSunil Khatri1-0/+22
Add support for ip dump for sdma_v_5_0 in devcoredump. Signed-off-by: Sunil Khatri <sunil.khatri@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-24drm/amdgpu: Add sdma_v5_0 ip dump for devcoredumpSunil Khatri1-0/+82
Add ip dump for sdma_v5_0 for devcoredump for all instances of sdma. Signed-off-by: Sunil Khatri <sunil.khatri@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-24drm/amdgpu: add print support for sdma_v_6_0 ip_dumpSunil Khatri1-0/+22
Add print support for ip dump for sdma_v_6_0 in devcoredump. Signed-off-by: Sunil Khatri <sunil.khatri@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-24drm/amdgpu: Add sdma_v6_0 ip dump for devcoredumpSunil Khatri1-0/+90
Add ip dump for sdma_v6_0 for devcoredump for all instances of sdma. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sunil Khatri <sunil.khatri@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-24drm/amdgpu: fix the print message in devcoredumpSunil Khatri1-1/+1
Fix the memory type logged for gtt memory size which is wrongly logged as visible vram size. Signed-off-by: Sunil Khatri <sunil.khatri@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-24drm/amdgpu: fix the extra space between two functionsSunil Khatri1-0/+1
fix extra line space between two functions. Signed-off-by: Sunil Khatri <sunil.khatri@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-24drm/amdgpu: add print support for sdma_v_5_2 ip_dumpSunil Khatri1-0/+21
Add support for ip dump for sdma_v_5_2 in devcoredump. Signed-off-by: Sunil Khatri <sunil.khatri@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-24drm/amdgpu: Add sdma_v5_2 ip dump for devcoredumpSunil Khatri2-0/+83
Add ip dump for sdma_v5_2 for devcoredump for all instances of sdma. Signed-off-by: Sunil Khatri <sunil.khatri@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-18drm/amd/display: fix corruption with high refresh rates on DCN 3.0Alex Deucher2-12/+13
This reverts commit bc87d666c05a13e6d4ae1ddce41fc43d2567b9a2 and the register changes from commit 6d4279cb99ac4f51d10409501d29969f687ac8dc. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3412 Cc: mikhail.v.gavrilov@gmail.com Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.10.x
2024-07-16drm/amd/display: Add simple struct doc to remove doc build warningRodrigo Siqueira2-5/+32
This commit is a part of a series that addresses the following build warning for opp: ./drivers/gpu/drm/amd/display/dc/inc/hw/opp.h:1: warning: no structured comments found ./drivers/gpu/drm/amd/display/dc/inc/hw/dpp.h:1: warning: no structured comments found This commit fixes this issue by adding a simple kernel-doc to a struct in the opp.h and the dpp.h files. Cc: Alex Deucher <alexander.deucher@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-16drm/amd/display: Move DIO documentation to the right placeRodrigo Siqueira2-9/+29
When building the kernel-doc, it complains with the below warning: ./drivers/gpu/drm/amd/display/dc/link/hwss/link_hwss_dio.h:1: warning: no structured comments found ./drivers/gpu/drm/amd/display/dc/link/hwss/link_hwss_dio.h:1: warning: no structured comments found This warning was caused by the wrong use of the ':export:' and the lack of function documentation in the file pointed under the ':internal:'. This commit addresses those issues by relocating the overview documentation to the correct C file, removing the ':export:' options, and adding two simple kernel-doc to ensure that ':internal:' does not have any warning. Cc: Alex Deucher <alexander.deucher@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Link: https://lore.kernel.org/dri-devel/20240715085918.68f5ecc9@canb.auug.org.au/ Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-16drm/amd/swsmu: enable Pstates profile levels for SMU v14.0.4Li Ma1-3/+15
Enables following UMD stable Pstates profile levels of power_dpm_force_performance_level for SMU v14.0.4. - profile_peak - profile_min_mclk - profile_min_sclk - profile_standard Signed-off-by: Li Ma <li.ma@amd.com> Reviewed-by: Tim Huang <tim.huang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-16drm/amd/pm: early return if disabling DPMS for GFX IP v11.5.2Tim Huang1-12/+4
This was intended to add support for GFX IP v11.5.2, but it needs to be applied to all GFX11 and subsequent APUs. Therefore the code should be revised to accommodate this. Signed-off-by: Tim Huang <tim.huang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-16drm/amdgpu: add mutex to protect ras shared memoryYiPeng Chai3-40/+86
Add mutex to protect ras shared memory. v2: Add TA_RAS_COMMAND__TRIGGER_ERROR command call status check. Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-16drm/amd/display: Add function banner for idle_workqueueRoman Li1-0/+13
[Why] htmldocs warning: drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h: warning: Function parameter or struct member 'idle_workqueue' not described in 'amdgpu_display_manager'. [How] Add comment section for idle_workqueue with param description. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Link: https://lore.kernel.org/dri-devel/20240715090211.736a9b4d@canb.auug.org.au/ Signed-off-by: Roman Li <Roman.Li@amd.com> Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-16drm/amd/display: Add doc entry for program_3dlut_sizeAlex Hung1-0/+14
Fixes the warning: Function parameter or struct member 'program_3dlut_size' not described in 'mpc_funcs' Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Closes: https://lore.kernel.org/dri-devel/20240715090445.7e9387ec@canb.auug.org.au/ Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-16drm/amdgpu/vcn: not pause dpg for unified queueBoyuan Zhang1-3/+11
For unified queue, DPG pause for encoding is done inside VCN firmware, so there is no need to pause dpg based on ring type in kernel. For VCN3 and below, pausing DPG for encoding in kernel is still needed. v2: add more comments v3: update commit message Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Ruijing Dong <ruijing.dong@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-16drm/amdgpu/vcn: identify unified queue in sw initBoyuan Zhang2-24/+16
Determine whether VCN using unified queue in sw_init, instead of calling functions later on. v2: fix coding style Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Ruijing Dong <ruijing.dong@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-16drm/amd/display: fix doc entry for bb_from_dmubAurabindo Pillai1-1/+3
Fixes the warning: Function parameter or struct member 'bb_from_dmub' not described in 'amdgpu_display_manager' Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-16drm/amd: Bump KMS_DRIVER_MINOR versionAurabindo Pillai1-1/+2
Increase the KMS minor version to indicate GFX12 DCC support since this contains a major change in how DCC is managed across IPs like GFX, DCN etc. This will be used mainly by userspace like Mesa to figure out DCC support on GFX12 hardware. v2: fix version number (Alex) Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Marek Olšák <marek.olsak@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-12drm/amdgpu/mes12: add missing opcode stringAlex Deucher1-0/+1
Fixes the indexing of the string array. Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-12drm/amdgpu/mes11: update opcode stringsAlex Deucher1-0/+3
Add new packet. Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-12Revert "drm/amd/display: Reset freesync config before update new state"Leo Li1-1/+0
This change caused PSR SU panels to not read from their remote fb, preventing us from entering self-refresh. It is a regression. This reverts commit eb6dfbb7a9c67c7d9bcdb9f9b9131270e2144e3d. Signed-off-by: Leo Li <sunpeng.li@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit dc1000bf463d1d89f66d6b5369cf76603f32c4d3)
2024-07-11drm/amd: Add power_saving_policy drm property to eDP connectorsMario Limonciello3-5/+53
When the `power_saving_policy` property is set to bit mask "Require color accuracy" ABM should be disabled immediately and any requests by sysfs to update will return an -EBUSY error. When the `power_saving_policy` property is set to bit mask "Require low latency" PSR should be disabled. When the property is restored to an empty bit mask ABM and PSR can be enabled again. Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240703051722.328-3-mario.limonciello@amd.com
2024-07-10drm/amdgpu: remove exp hw support check for gfx12Alex Deucher1-2/+0
Enable it by default. Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-10drm/amdgpu: timely save bad pages to eeprom after gpu ras reset is completedYiPeng Chai2-1/+23
The problem case is as follows: 1. GPU A triggers a gpu ras reset, and GPU A drives GPU B to also perform a gpu ras reset. 2. After gpu B ras reset started, gpu B queried a DE data. Since the DE data was queried in the ras reset thread instead of the page retirement thread, bad page retirement work would not be triggered. Then even if all gpu resets are completed, the bad pages will be cached in RAM until GPU B's bad page retirement work is triggered again and then saved to eeprom. This patch can save the bad pages to eeprom in time after gpu ras reset is completed. v2: 1. Add the above description to code comments. 2. Reuse existing function. Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-10drm/amdgpu: flush all cached ras bad pages to eepromYiPeng Chai1-6/+29
Before uninstalling gpu driver, flush all cached ras bad pages to eeprom. v2: Put the same code into a function and reuse the function. Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-10drm/amdgpu: select compute ME engines dynamicallySunil Khatri1-1/+1
GFX ME right now is one but this could change in future SOC's. Use no of ME for GFX as start point for ME for compute for GFX12. Signed-off-by: Sunil Khatri <sunil.khatri@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-10drm/amd/display: Allow display DCC for DCN401Aurabindo Pillai1-6/+25
To enable mesa to use display dcc, DM should expose them in the supported modifiers. Add the best (most efficient) modifiers first. Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-10drm/amdgpu: select compute ME engines dynamicallySunil Khatri1-1/+1
GFX ME right now is one but this could change in future SOC's. Use no of ME for GFX as start point for ME for compute for GFX11. Signed-off-by: Sunil Khatri <sunil.khatri@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-10drm/amdgpu/job: Replace DRM_INFO/ERROR loggingAlex Deucher1-10/+11
Use the dev_info/err variants so we get per device logging in multi-GPU cases. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-10drm/amdgpu: select compute ME engines dynamicallySunil Khatri1-1/+1
GFX ME right now is one but this could change in future SOC's. Use no of ME for GFX as start point for ME for compute for GFX10. Signed-off-by: Sunil Khatri <sunil.khatri@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-10drm/amd/pm: Ignore initial value in smu response registerDanijel Slivka3-5/+40
Why: If the reg mmMP1_SMN_C2PMSG_90 is being written to during amdgpu driver load or driver unload, subsequent amdgpu driver load will fail at smu_hw_init. The default of mmMP1_SMN_C2PMSG_90 register at a clean environment is 0x1 and if value differs from expected, amdgpu driver load will fail. How to fix: Ignore the initial value in smu response register before the first smu message is sent,if smc in SMU_FW_INIT state, just proceed further to send the message. If register holds an unexpected value after smu message was sent set, smc_state to SMU_FW_HANG state and no further smu messages will be sent. v2: Set SMU_FW_INIT state at the start of smu hw_init/resume. Check smc_fw_state before sending smu message if in hang state skip sending message. Set SMU_FW_HANG only in case unexpected value is detected Signed-off-by: Danijel Slivka <danijel.slivka@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Asad Kamal <asad.kamal@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-10drm/amdgpu: Initialize VF partition modeLijo Lazar4-12/+88
For SOCs with GFX v9.4.3, a VF may have multiple compute partitions. Fetch the partition information during init and initialize partition nodes. There is no support to switch partition mode in VF mode, hence disable the same. Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-10drm/amd/amdgpu: fix SDMA IRQ client ID <-> req mapping.Gavin Wan1-7/+13
sdma has 2 instances in SRIOV cpx mode. Odd numbered VFs have sdma0/sdma1 instances. Even numbered vfs have sdma2/sdma3. For Even numbered vfs, the sdma2 & sdma3 (irq srouce id CLIENTID_SDMA2 and CLIENTID_SDMA3) should map to irq seq 0 & 1. Signed-off-by: Gavin Wan <Gavin.Wan@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-09drm/ttm, drm/amdgpu, drm/xe: Consider hitch moves within bulk sublist movesThomas Hellström1-0/+4
To address the problem with hitches moving when bulk move sublists are lru-bumped, register the list cursors with the ttm_lru_bulk_move structure when traversing its list, and when lru-bumping the list, move the cursor hitch to the tail. This also means it's mandatory for drivers to call ttm_lru_bulk_move_init() and ttm_lru_bulk_move_fini() when initializing and finalizing the bulk move structure, so add those calls to the amdgpu- and xe driver. Compared to v1 this is slightly more code but less fragile and hopefully easier to understand. Changes in previous series: - Completely rework the functionality - Avoid a NULL pointer dereference assigning manager->mem_type - Remove some leftover code causing build problems v2: - For hitch bulk tail moves, store the mem_type in the cursor instead of with the manager. v3: - Remove leftover mem_type member from change in v2. v6: - Add some lockdep asserts (Matthew Brost) - Avoid NULL pointer dereference (Matthew Brost) - No need to check bo->resource before dereferencing bo->bulk_move (Matthew Brost) Cc: Christian König <christian.koenig@amd.com> Cc: Somalapuram Amaranath <Amaranath.Somalapuram@amd.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: <dri-devel@lists.freedesktop.org> Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Reviewed-by: Matthew Brost <matthew.brost@intel.com> Acked-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240705153206.68526-5-thomas.hellstrom@linux.intel.com Signed-off-by: Christian König <christian.koenig@amd.com>
generated by cgit v1.2.3 (git 2.39.0) at 2026-06-07 08:33:17 +0300