summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd
AgeCommit message (Collapse)AuthorFilesLines
2024-10-02drm/amd/display: Fix system hang while resume with TBT monitorTom Chung1-0/+6
[Why] Connected with a Thunderbolt monitor and do the suspend and the system may hang while resume. The TBT monitor HPD will be triggered during the resume procedure and call the drm_client_modeset_probe() while struct drm_connector connector->dev->master is NULL. It will mess up the pipe topology after resume. [How] Skip the TBT monitor HPD during the resume procedure because we currently will probe the connectors after resume by default. Reviewed-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-02drm/amd/display: Adjust PHY FSM transition to TX_EN-to-PLL_ON for TMDSRyan Seto4-82/+57
[Why] If two monitors with TMDS signals were timing synced and one was disconnected, the stream would go out of sync too early due to the PLL turning off and the system could hang [How] On link disable output, change PHY FSM transition from TX_EN-to-PHY_OFF to TX_EN-to-PLL_ON for TMDS Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Ryan Seto <ryanseto@amd.com> Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-02drm/amd/display: 3.2.302Aric Cyr1-1/+1
* Stability fixes in DML, SPL, * Improvements for MST, DSC, eDP, IPS, HDR * Fix clock gating on DCN35 * Fixes from static analysis checks * Other bug fixes and debug improvements Reviewed-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-02drm/amdgpu: update the handle ptr in print_ip_stateSunil Khatri21-46/+44
Update the ptr handle to amdgpu_ip_block ptr in all the functions affected. Signed-off-by: Sunil Khatri <sunil.khatri@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-02drm/amd/display: Enable idle workqueue for more IPS modesLeo Li1-1/+2
[Why] There are more IPS modes other than DMUB_IPS_ENABLE that enables IPS. We need to enable the hotplug detect idle workqueue for those modes as well. [How] Modify the if condition to initialize the workqueue in all IPS modes except for DMUB_IPS_DISABLE_ALL. Fixes: 65444581a4ae ("drm/amd/display: Determine IPS mode by ASIC and PMFW versions") Signed-off-by: Leo Li <sunpeng.li@amd.com> Reviewed-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-02drm/amd/display: Wait For DET Update Should Use Current StateAustin Zheng2-3/+8
[Why] Current state should be used when waiting for DET update instead of new context. For any streams decreasing in DET, pipes used in the current state should be checked since those pipes need to free their DET before DET can be reallocated. [How] Pass in current_state instead of context. Use pipe from current_state instead of context. This assumes that pipe in the current_state is an OTG_MASTER pipe if the pipe in the context is an OTG_MASTER pipe. Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Austin Zheng <Austin.Zheng@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-02drm/amd/display: Add HDR workaround for specific eDPAlex Hung3-1/+15
[WHY & HOW] Some eDP panels suffer from flicking when HDR is enabled in KDE. This quirk works around it by skipping VSC that is incompatible with eDP panels. Link: https://gitlab.freedesktop.org/drm/amd/-/issues/3151 Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-02drm/amd/display: Clip rect size changes should be full updatesJoshua Aberback3-29/+19
[Why] In cases where an MPO plane is being dragged around partially off-screen, it is possible to get a flip where the only scaling parameters to change are the clip rect size and position. Currently, clip rect size changes are considered medium updates, which can result in the clip rect being used for HW programming being larger than the clip rect that was used for the last DML validation. This can lead to mismatches in different parts of the pipe and can result in a p-state hang. [How] - consider clip rect size changes scaling changes, therefore full updates - refactor get_scaling_info_update_type for clarity - remove clip_size_change update flag Clip rect size changes were previously demoted from full updates as an optimization when the MPO + ODM policy changed to always pre-allocate MPO pipes, but it created the issue described above. Personally testing this use case, the performance feels fine with full update spam, and we expect this is a fairly infrequent use case. If the performance needs to be optimized in the future, consider reworking the entire update type logic to run a DML pass and determine the update type based on what DML says will actually change. Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Joshua Aberback <joshua.aberback@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-02drm/amd/display: Fix cursor visual confirm updateIlya Bakoulin4-10/+24
[Why/How] Certain transitions from HW to SW cursor can be missed, which will result in black visual confirm instead of expected blue/red. Need to add handling for cursor visual confirm to dc_update_visual_confirm_color. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-02drm/amd/display: Update Interface to Check UCLK DPMAustin Zheng5-1/+36
[Why] Videos using YUV420 format may result in high power being used. Disabling MPO may result in lower power usage. Update interface that can be used to check power profile of a dc_state. [How] Allow pstate switching in VBlank as last entry in strategy candidates. Add helper functions that can be used to determine power level: -get power profile after a dc_state has undergone full validation Reviewed-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Austin Zheng <Austin.Zheng@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-02drm/amd/display: fix static analysis warningsSamson Tam5-44/+45
[Why & How] Fix static analysis warnings in SPL library Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Samson Tam <Samson.Tam@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-02drm/amd/display: correct register Clock Gater incorrectly disabledCharlene Liu1-6/+4
[why] The "dpp35_dppclk_control" routine is incorrectly disabling the register clock gater when the DPP is enabled. The "DISPCLK_R_GATE_DISABLE" should never be set to 1 in the normal operating mode. This will disable the clock gater and the DPPCLK register clock branch will always be running. As a consequence, the dynamic power will be higher than expected. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Charlene Liu <Charlene.Liu@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-02drm/amd/display: avoid set dispclk to 0Charlene Liu1-0/+1
[why] set dispclk to 0 cause stability issue. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Charlene Liu <Charlene.Liu@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-02drm/amd/display: Block UHBR Based On USB-C PD Cable IDMichael Strauss1-6/+16
[WHY] Currently the absence of UHBR cable ID caps from USB-C PD does not block UHBR rates. In situations where DPCD reports valid UHBR capability but USB-C PD does not, such as using a USB-C to DP1.4 dongle connected to a native DP2.1 cable, link loss and lightup failures can be seen as a result. Additionally, in edge cases where a platform supports cable ID but DMUB doesn't correctly return cable ID caps, driver currently also allows UHBR. [HOW] Block UHBR rates over DP alt mode if cable id indicates no UHBR support. Additionally, block UHBR rates if a cable ID supported platform receives no reply from a DMUB cable id query. Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Reviewed-by: Ovidiu Bunea <ovidiu.bunea@amd.com> Signed-off-by: Michael Strauss <michael.strauss@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-02drm/amd/display: Set Pipe Unlock Order Outside of HWSEQAustin Zheng4-20/+57
[Why] Current pipe unlock order set within dcn401_interdependent_update_lock. Separate the logic from the functionality to allow for unit testing and make it easier to debug. [How] Add a flag to indicate if a pipe unlock order should be set. Create function to determine unlock order. Indicate which pipes should be unlocked first using array stored in dc scratch memory. Pipes indicated in array can be unlocked in any order. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Austin Zheng <Austin.Zheng@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-02drm/amd/display: Change dc_surface_update cm2_params to constShunlu Zhang1-1/+1
[WHY] cm2_params is used to set update_flags. It's value is not intended to be modified. [WHAT] Change the declaration of cm2_params to be a constant variable Reviewed-by: Tao Huang <tao.huang@amd.com> Reviewed-by: Ariel Bernstein <eric.bernstein@amd.com> Signed-off-by: Shunlu Zhang <Shunlu.Zhang@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-02drm/amd/display: Clean up triple buffer enablement codeSung Lee1-11/+12
[WHY] Triple buffer enablement currently does not work properly [HOW] Allow triple buffer enablement to happen properly on fast updates Reviewed-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Sung Lee <sunglee@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-02drm/amd/display: Fix incorrect DSC recompute triggerFangzhi Zuo1-1/+1
A stream without dsc_aux should not be eliminated from the dsc determination. Whether it needs a dsc recompute depends on whether its mode has changed or not. Eliminating such a no-dsc stream from the dsc determination policy will end up with inconsistencies in the new dc_state when compared to the current dc_state, triggering a dsc recompute that should not have happened. Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-02drm/amd/display: Monitor patch to call blank_stream() before otg offZhongwei2-0/+6
[Why] Turning off OTG before DIG is on and backlight is on, might cause: DIG FIFO underflow. EDP output unexpected video data. That might violate EDP spec. EDP spec requires black light should be off before validate video data is turned off. Currently garbage issue only occurs in one type of EDP to MIPI converter. [How] Add monitor patch to call blank_stream() before disable_crtc(). That will be no impact for current sequence. If there are more types of EDP panels meeting this issue later, we might remove this monitor patch and fix the current sequence. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Zhongwei <Zhongwei.Zhang@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-02drm/amd/display: Wait for all pending cleared before full updateAlvin Lee24-34/+161
[Description] Before every full update we must wait for all pending updates to be cleared - this is particularly important for minimal transitions because if we don't wait for pending cleared, it will be as if there was no minimal transition at all. In OTG we must read 3 different status registers for pending cleared, one specifically for OTG updates, one specifically for OPTC updates, and the last for surface related updates. Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-02drm/amd/display: Restore Optimized pbn Value if Failed to Disable DSCFangzhi Zuo1-4/+13
Existing last step of dsc policy is to restore pbn value under minimum compression when try to greedily disable dsc for a stream failed to fit in MST bw. Optimized dsc params result from optimization step is not necessarily the minimum compression, therefore it is not correct to restore the pbn under minimum compression rate. Restore the pbn under minimum compression instead of the value from optimized pbn could result in the dsc params not correct at the modeset where atomic_check failed due to not enough bw. One or more monitors connected could not light up in such case. Restore the optimized pbn value, instead of using the pbn value under minimum compression. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-02drm/amd/display: disable adaptive scaler and sharpener when integer scaling ↵Samson Tam2-0/+13
is enabled [Why & How] When integer scaling is enabled, set taps to 1 and disable adaptive scaler and sharpener. Reviewed-by: Jun Lei <jun.lei@amd.com> Signed-off-by: Samson Tam <Samson.Tam@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-02drm/amd/display: update DML2 policy ↵Yihan Zhu1-1/+0
EnhancedPrefetchScheduleAccelerationFinal DCN35 [WHY & HOW] Mismatch in DCN35 DML2 cause bw validation failed to acquire unexpected DPP pipe to cause grey screen and system hang. Remove EnhancedPrefetchScheduleAccelerationFinal value override to match HW spec. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Charlene Liu <charlene.liu@amd.com> Signed-off-by: Yihan Zhu <Yihan.Zhu@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-02drm/amdgpu: Add sysfs nodes to get xcp detailsLijo Lazar3-0/+208
Add partition config nodes in sysfs to get resource instance details for a particular partition mode. A resource could be anything like an xcc, vcn decoder, system dma units etc. Details of various resource instances are available under /sys/bus/pci/devices/.../compute_partition_config/ Select a partition configuration: /sys/bus/pci/devices/.../compute_partition_config/xcp_config Number of instances of a resource: /sys/bus/pci/devices/.../compute_partition_config/<rsrc_name>/num_inst Total partitions sharing the resource: /sys/bus/pci/devices/.../compute_partition_config/<rsrc_name>/num_shared v2: Update node name as per spec Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Asad Kamal <asad.kamal@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-02drm/amdgpu: update the handle ptr in dump_ip_stateSunil Khatri22-41/+43
Update the ptr handle to amdgpu_ip_block ptr in all the functions. Signed-off-by: Sunil Khatri <sunil.khatri@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-02drm/amdgpu/sdma5: split out per instance resume functionJiadong Zhu1-115/+138
Extract the resume sequence from sdma_v5_0_gfx_resume for starting/restarting an individual instance. Signed-off-by: Jiadong Zhu <Jiadong.Zhu@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-02drm/amdkfd: Remove an unused parameter in queue creationLang Yu3-8/+5
struct file *f is unused in queue creation, remove it. Signed-off-by: Lang Yu <lang.yu@amd.com> Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-02Revert "drm/amd/display: change the panel power savings level without a modeset"Leo Li3-41/+17
This reverts commit 8d20a066fa9beb1ec559b12945414a51d17d07e5. It's causing a failure in the abm_gradual igt test. Signed-off-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-28Merge tag 'drm-next-2024-09-28' of https://gitlab.freedesktop.org/drm/kernelLinus Torvalds100-831/+1027
Pull drm fixes from Dave Airlie: "Regular fixes for the week to end the merge window, i915 and xe have a few each, amdgpu makes up most of it with a bunch of SR-IOV related fixes amongst others. i915: - Fix BMG support to UHBR13.5 - Two PSR fixes - Fix colorimetry detection for DP xe: - Fix macro for checking minimum GuC version - Fix CCS offset calculation for some BMG SKUs - Fix locking on memory usage reporting via fdinfo and BO destroy - Fix GPU page fault handler on a closed VM - Fix overflow in oa batch buffer amdgpu: - MES 12 fix - KFD fence sync fix - SR-IOV fixes - VCN 4.0.6 fix - SDMA 7.x fix - Bump driver version to note cleared VRAM support - SWSMU fix - CU occupancy logic fix - SDMA queue fix" * tag 'drm-next-2024-09-28' of https://gitlab.freedesktop.org/drm/kernel: (79 commits) drm/amd/pm: update workload mask after the setting drm/amdgpu: bump driver version for cleared VRAM drm/amdgpu: fix vbios fetching for SR-IOV drm/amdgpu: fix PTE copy corruption for sdma 7 drm/amdkfd: Add SDMA queue quantum support for GFX12 drm/amdgpu/vcn: enable AV1 on both instances drm/amdkfd: Fix CU occupancy for GFX 9.4.3 drm/amdkfd: Update logic for CU occupancy calculations drm/amdgpu: skip coredump after job timeout in SRIOV drm/amdgpu: sync to KFD fences before clearing PTEs drm/amdgpu/mes12: set enable_level_process_quantum_check drm/i915/dp: Fix colorimetry detection drm/amdgpu/mes12: reduce timeout drm/amdgpu/mes11: reduce timeout drm/amdgpu: use GEM references instead of TTMs v2 drm/amd/display: Allow backlight to go below `AMDGPU_DM_DEFAULT_MIN_BACKLIGHT` drm/amd/display: Fix kdoc entry for 'tps' in 'dc_process_dmub_dpia_set_tps_notification' drm/amdgpu: update golden regs for gfx12 drm/amdgpu: clean up vbios fetching code drm/amd/display: handle nulled pipe context in DCE110's set_drr() ...
2024-09-27drm/amd/display: change the panel power savings level without a modesetHamza Mahfooz3-17/+41
We don't actually need to request that the compositor does a full modeset to modify the panel power savings level, we can instead just make a request to DMUB, to set the new level dynamically. Cc: Harry Wentland <harry.wentland@amd.com> Cc: Leo Li <sunpeng.li@amd.com> Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Sebastian Wick <sebastian@sebastianwick.net> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Tested-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/3578 Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-27drm/amdgpu: Add PSP reload case to reset-on-initLijo Lazar1-0/+2
A reset on initialization will be needed if a new PSP TOS needs to be loaded than the one currently active on the system. This is possible only on SOCs which support a full device reset which results in unload of active PSP TOS. Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com> Tested-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-27drm/amdgpu: Add interface for TOS reload casesLijo Lazar3-0/+40
Add interface to check if a different TOS needs to be loaded than the one which is which is already active on the SOC. Presently the interface is restricted to specific variants of PSPv13.0. Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com> Tested-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-27drm/amdgpu: Support reset-on-init on select SOCsLijo Lazar1-0/+1
Add XGMI reset on init support to aldebaran and SOCs with GC v9.4.3. Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com> Tested-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-27drm/amdgpu: Drop delayed reset work handlerLijo Lazar2-84/+0
Drop delayed reset work handler as it is no longer used. Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com> Tested-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-27drm/amdgpu: Refactor XGMI reset on init handlingLijo Lazar6-19/+91
Use XGMI hive information to rely on resetting XGMI devices on initialization rather than using mgpu structure. mgpu structure may have other devices as well. Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Feifei Xu <feifxu@amd.com> Acked-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com> Tested-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-27drm/amdgpu: Add helper to initialize badpage infoLijo Lazar3-21/+41
Add a separate function to read badpage data during initialization. Reading bad pages will need hardware access and cannot be done during reset. Hence in cases where device needs a full reset during init itself, attempting to read will cause a deadlock. Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com> Tested-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-27drm/amdgpu: Remove unused amdgpu_i2c functionsDr. David Alan Gilbert2-29/+0
amdgpu_i2c_add and amdgpu_i2c_init were added in 2015's commit d38ceaf99ed0 ("drm/amdgpu: add core driver (v4)") but never used. Remove them. Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-27drm/amdgpu: Remove unused amdgpu_gfx_bit_to_me_queueDr. David Alan Gilbert2-12/+0
amdgpu_gfx_bit_to_me_queue has been unused since it was added in commit 7470bfcf2014 ("drm/amdgpu: add helper function for gfx queue/bitmap transition") Remove it. Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-27drm/amdgpu: Remove unused amdgpu_gmc_vram_cpu_paDr. David Alan Gilbert2-13/+0
amdgpu_gmc_vram_cpu_pa has been unused since commit 087451f372bf ("drm/amdgpu: use generic fb helpers instead of setting up AMD own's.") Remove it. Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-27drm/amdgpu: Remove unused amdgpu_atpx functionsDr. David Alan Gilbert2-20/+0
amdgpu_atpx_dgpu_req_power_for_displays has been unused since commit bdb1ccb080da ("drm/amdgpu: remove ATPX_DGPU_REQ_POWER_FOR_DISPLAYS check when hotplug-in") amdgpu_atpx_get_dhandle has been unused since commit f9b7f3703ff9 ("drm/amdgpu/acpi: make ATPX/ATCS structures global (v2)") Remove them. Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-27drm/amdgpu: Remove unused amdgpu_device_ip_is_idleDr. David Alan Gilbert2-26/+0
amdgpu_device_ip_is_idle is unused. It was renamed from 'amdgpu_is_idle' which was originally added in commit 5dbbb60ba61e ("drm/amdgpu: add IP helpers for wait_for_idle and is_idle") but hasn't been used. Remove it. Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-27drm/amdgpu: Add reset on init handler for XGMILijo Lazar3-0/+155
In some cases, device needs to be reset before first use. Add handlers for doing device reset during driver init sequence. Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Feifei Xu <feifxu@amd.com> Acked-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com> Tested-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-27drm/amd/display: fix typos in several function pointer checksVitaliy Shevtsov3-4/+4
Fix several copypaste mistakes in *_disable_link_output() functions where an improper function pointer is checked before dereference. Found by Linux Verification Center (linuxtesting.org) with Svace. Signed-off-by: Vitaliy Shevtsov <v.shevtsov@maxima.ru> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-27drm/amdgpu: Add callback get xcp resource infoLijo Lazar2-2/+83
Add a callback interface to get the resource information of a partition mode. Presently the information has number of resources and number of entities sharing the resource. Add the implementation for aquavanjaram SOCs. Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Asad Kamal <asad.kamal@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-27drm/amd: Add helper to get partition config modesLijo Lazar3-20/+76
Add helper to get supported/available partition config modes Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-27drm/amdgpu: Fix typo "acccess" and improve the comment style hereWangYuli2-4/+8
There are some spelling mistakes of 'acccess' in comments which should be instead of 'access'. And the comment style should be like this: /* * Text * Text */ Suggested-by: Christian König <christian.koenig@amd.com> Link: https://lore.kernel.org/all/f75fbe30-528e-404f-97e4-854d27d7a401@amd.com/ Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://lore.kernel.org/all/0c768bf6-bc19-43de-a30b-ff5e3ddfd0b3@suse.de/ Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: WangYuli <wangyuli@uniontech.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-27drm/amdgpu/gfx9: Explicitly halt CP before initAlex Deucher1-0/+4
Need to make sure it's halted as we don't know what state the GPU may have been left in previously. Reviewed-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-27drm/amdgpu/gfx9: set additional bits on CP haltAlex Deucher1-1/+18
Need to set the pipe reset and cache invalidation bits on halt otherwise we can get stale state if the CP firmware changes (e.g., on module unload and reload). Reviewed-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-27drm/amdgpu: add amdgpu_device reference in ip blockSunil Khatri2-0/+3
To handle amdgpu_device reference for different GPUs we add it's reference in each ip block which can be used to differentiate between difference gpu devices. Signed-off-by: Sunil Khatri <sunil.khatri@amd.com> Suggested-by: Christian König <christian.koenig@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-27drm/amdgpu: Separate reinitialization after resetLijo Lazar2-63/+89
Move the reinitialization part after a reset to another function. No functional changes. Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com> Tested-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-20 02:32:20 +0300