summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd
AgeCommit message (Collapse)AuthorFilesLines
2025-02-13drm/amdgpu/gfx10: Add cleaner shader for GFX10.1.10Srinivasan Shanmugam3-0/+175
This commit adds the cleaner shader microcode for GFX10.1.0 GPUs. The cleaner shader is a piece of GPU code that is used to clear or initialize certain GPU resources, such as Local Data Share (LDS), Vector General Purpose Registers (VGPRs), and Scalar General Purpose Registers (SGPRs). Clearing these resources is important for ensuring data isolation between different workloads running on the GPU. Without the cleaner shader, residual data from a previous workload could potentially be accessed by a subsequent workload, leading to data leaks and incorrect computation results. The cleaner shader microcode is represented as an array of 32-bit words (`gfx_10_1_0_cleaner_shader_hex`). This array is the binary representation of the cleaner shader code, which is written in a low-level GPU instruction set. When the cleaner shader feature is enabled, the AMDGPU driver loads this array into a specific location in the GPU memory. The GPU then reads this memory location to fetch and execute the cleaner shader instructions. The cleaner shader is executed automatically by the GPU at the end of each workload, before the next workload starts. This ensures that all GPU resources are in a clean state before the start of each workload. This addition is part of the cleaner shader feature implementation. The cleaner shader feature helps resource utilization by cleaning up GPU resources after they are used. It also enhances security and reliability by preventing data leaks between workloads. Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Suggested-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-13drm/amdgpu: Skip err_count sysfs creation on VF unsupported RAS blocksVictor Skvortsov3-1/+21
VFs are not able to query error counts for all RAS blocks. Rather than returning error for queries on these blocks, skip sysfs the creation all together. Signed-off-by: Victor Skvortsov <victor.skvortsov@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-13drm/amdgpu: Update usage for bad page thresholdHawking Zhang4-40/+45
The driver's behavior varies based on the configuration of amdgpu_bad_page_threshold setting Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-13drm/amd/pm: Update pm attr for gc_9_5_0Asad Kamal1-9/+18
Update power management & clk attributes for gc_v_9_5_0 Signed-off-by: Asad Kamal <asad.kamal@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-13drm/amd/pm: Skip showing MCLK_OD levelAsad Kamal1-0/+3
Skip showing MCLK_OD level if setting UCLK MAX is not supported Signed-off-by: Asad Kamal <asad.kamal@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-13drm/amd/pm: Add metrics support for smuv13.0.12Asad Kamal2-81/+113
Add metrics table support for smuv13.0.12 to fetch data from metrics version v2 v2: Update get metric field and get metric size macro (Lijo) Signed-off-by: Asad Kamal <asad.kamal@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-13drm/amd/pm: Add SMUv13.0.12 PPT interfaceAsad Kamal5-2/+247
Add SMUv13.0.12 PPT interface to fetch dpm features Signed-off-by: Asad Kamal <asad.kamal@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-13drm/amd/pm: Add metrics table header for smu_v13_0_12Asad Kamal1-0/+109
Add metrics table header for smu_v13_0_12 as metrics version V2 Signed-off-by: Asad Kamal <asad.kamal@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-13drm/amd/pm: Update metrics tbl struct for smu_v_13.0.6Asad Kamal2-30/+32
Update metrics table struct name for smu_v_13.0.6 and keep it as version Signed-off-by: Asad Kamal <asad.kamal@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-13drm/amd/pm: Update smu_v13_0_0 SRIOV VF flag in msg mapping tableYifan Zha1-3/+3
[Why] Under SRIOV VF, driver send a VF unsupportted smu message causing a failure. [How] Update smu_v13_0_0 message mapping table based on PMFW. Signed-off-by: Yifan Zha <Yifan.Zha@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-13drm/amd/display: Refactor mark_seamless_boot_stream()Mario Limonciello1-7/+11
mark_seamless_boot_stream() can be called multiple times to run the more expensive checks in dc_validate_boot_timing(). Refactor the function so that if those have already passed once the function isn't called again. Also add a message the first time that they have passed to let the user know the stream will be used for seamless boot. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Link: https://lore.kernel.org/r/20250120194903.1048811-4-superm1@kernel.org Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-13drm/amd: Mark amdgpu.gttsize parameter as deprecated and show warnings on useMario Limonciello2-4/+14
When not set `gttsize` module parameter by default will get the value to use for the GTT pool from the TTM page limit, which is set by a separate module parameter. This inevitably leads to people not sure which one to set when they want more addressable memory for the GPU, and you'll end up seeing instructions online saying to set both. Add some messages to try to guide people both who are using or misusing the parameters and mark the parameter as deprecated with the plan to drop it after the next LTS kernel release. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-13drm/amd/display: Add new log type `DC_LOG_INFO`Mario Limonciello1-0/+1
`DC_LOG_INFO` will wrap `drm_info()` and be used for the typical `INFO` level printk messages but in DC code. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Link: https://lore.kernel.org/r/20250120194903.1048811-3-superm1@kernel.org Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-13drm/amd/display: Decrease message about seamless boot enabled to debugMario Limonciello1-1/+1
The message in amdgpu_dm about seamless boot is about an ASIC version check and module parameter check. It doesn't actually mean that seamless boot will work. Push this message into debug to avoid being disingenuous about it working until it's been tested. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Link: https://lore.kernel.org/r/20250120194903.1048811-2-superm1@kernel.org Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-13drm/amd/display: Add debug messages for dc_validate_boot_timing()Mario Limonciello1-28/+86
dc_validate_boot_timing() runs through an exhaustive list of checks to determine whether a boot stream can be marked as seamless. When the checks fail, a user will be left guessing what the reason was Add debug statements that will be helpful to validate the specific reason. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Link: https://lore.kernel.org/r/20250120194903.1048811-1-superm1@kernel.org Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-13amdgpu/soc15: enable asic reset for dGPU in case of suspend abortJiang Liu1-5/+3
When GPU suspend is aborted, do the same for dGPU as APU to reset soc15 asic. Otherwise it may cause following errors: [ 547.229463] amdgpu 0001:81:00.0: [drm:amdgpu_ring_test_helper [amdgpu]] *ERROR* ring kiq_0.2.1.0 test failed (-110) [ 555.126827] amdgpu 0000:0a:00.0: [drm:amdgpu_ring_test_helper [amdgpu]] *ERROR* ring kiq_0.2.1.0 test failed (-110) [ 555.126901] [drm:amdgpu_gfx_enable_kcq [amdgpu]] *ERROR* KCQ enable failed [ 555.126957] [drm:amdgpu_device_ip_resume_phase2 [amdgpu]] *ERROR* resume of IP block <gfx_v9_4_3> failed -110 [ 555.126959] amdgpu 0000:0a:00.0: amdgpu: amdgpu_device_ip_resume failed (-110). [ 555.126965] PM: dpm_run_callback(): pci_pm_resume+0x0/0xe0 returns -110 [ 555.126966] PM: Device 0000:0a:00.0 failed to resume async: error -110 This fix has been tested on Mi308X. Signed-off-by: Jiang Liu <gerry@linux.alibaba.com> Tested-by: Shuo Liu <shuox.liu@linux.alibaba.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/r/2462b4b12eb9d025e82525178d568cbaa4c223ff.1736739303.git.gerry@linux.alibaba.com Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-13drm/amd/display: 3.2.317Aric Cyr1-1/+1
This version brings along following fixes: - Reverse the visual confirm recouts - Exclude clkoffset and ips setting for dcn351 specific - Fix cursor programming problems - Increase block_sequence array size - Use Nominal vBlank to determine vstartup if Provided - Fix clock frequencies incorrect problems for dcn401 - Add SDP programming for UHBR link as well - Support "Broadcast RGB" drm property Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-13drm/amd/display: Reverse the visual confirm recoutsPeterson Guo5-142/+73
[WHY] When checking if a pipe can disable cursor to prevent duplicate cursors, having visual confirm on will prevent disabling cursors on planes which cover the bottom of the screen. [HOW] When checking if a plane can disable visual confirm, the pipe first reverses these calculations before doing the checks. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Peterson Guo <peterson.guo@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-13drm/amd/display: Exclude clkoffset and ips setting for dcn351 specificCharlene Liu1-2/+2
Exclude clock offset and IPS setting for dcn351 specific only. Reviewed-by: Syed Hassan <syed.hassan@amd.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Charlene Liu <Charlene.Liu@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-13drm/amd/display: Increase block_sequence array sizeJoshua Aberback1-1/+1
[Why] It's possible to generate more than 50 steps in hwss_build_fast_sequence, for example with a 6-pipe asic where all pipes are in one MPC chain. This overflows the block_sequence buffer and corrupts block_sequence_steps, causing a crash. [How] Expand block_sequence to 100 items. A naive upper bound on the possible number of steps for a 6-pipe asic, ignoring the potential for steps to be mutually exclusive, is 91 with current code, therefore 100 is sufficient. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Joshua Aberback <joshua.aberback@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-13drm/amd/display: Use Nominal vBlank If Provided Instead Of Capping ItAustin Zheng1-3/+2
[Why/How] vBlank used to determine the max vStartup is based on the smallest between the vblank provided by the timing and vblank in ip_caps. Extra vblank time is not considered if the vblank provided by the timing ends up being higher than what's defined by the ip_caps Use 1 less than the vblank size in case the timing is interlaced so vstartup will always be less than vblank_nom. Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Austin Zheng <Austin.Zheng@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-13drm/amd/display: Populate register address for dentist for dcn401Dillon Varone2-0/+3
[WHY&HOW] Address was not previously populated which can result in incorrect clock frequencies being read on boot. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-13drm/amd/display: Add AS SDP programming for UHBR link rate.Ian Chen1-0/+5
Add SDP programming for UHB link as well. Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Ian Chen <ian.chen@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-13drm/amd/display: log destination of vertical interruptJosip Pavic23-42/+145
[Why] Knowing the destination of OTG's vertical interrupt 2 is useful for debugging, but it is not currently included in the OTG state readback logic [How] Read the OTG interrupt destination register to get the vertical interrupt 2 destination on ASICs that have this register when reading back the OTG state from hardware Reviewed-by: Sung Lee <sung.lee@amd.com> Reviewed-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Josip Pavic <Josip.Pavic@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-13drm/amd/display: Support "Broadcast RGB" drm propertyYan Li2-3/+24
[WHY] The source device outputs a full RGB signal, but TV may be set to use limited RGB. The mismatch in color range leads to a degradation in image quality. Display driver should have the ability to switch between the full and limited RGB to match TV's settings. [HOW] Add support of the linux DRM "Broadcast RGB" property, which indicates the Quantization Range (Full vs Limited) used. User space can set this property to be "Automatic", "Full" or "Limited 16:235" to adjust the output color range. Reviewed-by: Jerry Zuo <jerry.zuo@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Yan Li <yan.li@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-13drm/amd/display: remove extraneous ; after statementsColin Ian King1-2/+2
There are a couple of statements with two following semicolons, replace these with just one semicolon. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-13drm/amdgpu/gfx10: implement gfx queue reset via MMIOJesse.zhang@amd.com1-0/+19
Using mmio to do queue reset v2: Alignment the function with gfx9/gfx9.4.3. Signed-off-by: Jesse Zhang <jesse.zhang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-13drm/amdgpu/gfx10: implement queue reset via MMIOJesse.zhang@amd.com1-0/+34
Using mmio to do queue reset. v2: Alignment this function with gfx9/gfx9.4.3. Signed-off-by: Jesse Zhang <jesse.zhang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-13drm/amd/pm: Fill ip version for SMU v13.0.12Asad Kamal1-4/+2
Fill ip version in pm_metrics for SMU v13.0.12 v2: Remove ip version check(Lijo) Signed-off-by: Asad Kamal <asad.kamal@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-13drm/amdgpu: Use active umc info from discoveryLijo Lazar2-1/+42
There could be configs where some UMC instances are harvested. This information is obtained through discovery data and populated in umc.active_mask. Avoid reassigning this as AID mask, instead use the mask directly while iterating through umc instances. This is to avoid accesses to harvested UMC instances. v2: fix warning (Alex) Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-13drm/amd/pm: Populate pmfw version for SMU v13.0.12Asad Kamal1-4/+1
Populate pmfw version for SMU v13.0.12 to device struct v2: Remove ip version check to get smu version Signed-off-by: Asad Kamal <asad.kamal@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-13drm/amdgpu: Set noretry default for GC 9.5.0Amber Lin1-0/+1
Set GC 9.5.0 noretry default as 1 for better performance. It can be changed by the administrator using amdgpu.noretry=0 or by the user using HSA_XNACK=1 environment variable. Signed-off-by: Amber Lin <Amber.Lin@amd.com> Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviwanathan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-13drm/amdgpu: read harvest info from harvest table for gfx950Le Ma1-1/+2
Harvest table is applied for gfx950. Signed-off-by: Le Ma <le.ma@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-13drm/amdgpu: enlarge the VBIOS binary size limitShiwu Zhang1-1/+1
Some chips have a larger VBIOS file so raise the size limit to support the flashing tool. Signed-off-by: Shiwu Zhang <shiwu.zhang@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-13drm/amdkfd: Remove unused functionsDr. David Alan Gilbert3-45/+0
kfd_device_by_pci_dev(), kfd_get_pasid_limit() and kfd_set_pasid_limit() have been unused since 2023's commit c99a2e7ae291 ("drm/amdkfd: drop IOMMUv2 support") Remove them. Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-13drm/amdgpu/swsmu: set workload profile to bootup defaultAlex Deucher2-19/+3
Now that we can select a workload profile dynamically when we submit work, it's best to default to the bootup default workload profile. Defaulting to other profiles prevents some power management features from kicking in during idle periods. Once all jobs have finished, the workload profile will automatically move back to default bootup for max power savings. Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-13drm/amdgpu: add dynamic workload profile switching for gfx12Alex Deucher1-4/+22
Enable dynamic workload profile switching for gfx12. Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-13drm/amdgpu: add dynamic workload profile switching for gfx11Alex Deucher1-4/+22
Enable dynamic workload profile switching for gfx11. Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-13drm/amdgpu: add dynamic workload profile switching for gfx10Alex Deucher1-4/+22
Enable dynamic workload profile switching for gfx10. Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-13drm/amdgpu/gfx: add ring helpers for setting workload profileAlex Deucher2-0/+68
Add helpers to switch the workload profile dynamically when commands are submitted. This allows us to switch to the FULLSCREEN3D or COMPUTE profile when work is submitted. Add a delayed work handler to delay switching out of the selected profile if additional work comes in. This works the same as the VIDEO profile for VCN. This lets dynamically enable workload profiles on the fly and then move back to the default when there is no work. Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-13drm/amdkfd: Have kfd driver use same PASID values from graphic driverXiaogang Chen16-181/+196
Current kfd driver has its own PASID value for a kfd process and uses it to locate vm at interrupt handler or mapping between kfd process and vm. That design is not working when a physical gpu device has multiple spatial partitions, ex: adev in CPX mode. This patch has kfd driver use same pasid values that graphic driver generated which is per vm per pasid. These pasid values are passed to fw/hardware. We do not need change interrupt handler though more pasid values are used. Also, pasid values at log are replaced by user process pid; pasid values are not exposed to user. Users see their process pids that have meaning in user space. Signed-off-by: Xiaogang Chen <xiaogang.chen@amd.com> Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-13drm/amdgpu: Check RRMT status for JPEG v4.0.3Lijo Lazar2-2/+13
RRMT could get dynamically enabled/disabled by PSP firmware. Read the status from register for reading RRMT status. For VFs, this is not accessible, hence assume that it's always disabled for now. Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Sathishkumar S <sathishkumar.sundararaju@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-13drm/amdgpu: Check RRMT status for VCN v4.0.3Lijo Lazar2-2/+13
RRMT could get dynamically enabled/disabled by PSP firmware. Read the status from register for reading RRMT status. For VFs, this is not accessible, hence assume that it's always disabled for now. Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Sathishkumar S <sathishkumar.sundararaju@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-13drm/amdgpu: Add VCN v4.0.3 RRMT register offsetLijo Lazar1-1/+2
Add RRMT control register offset for VCN v4.0.3 Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Sathishkumar S <sathishkumar.sundararaju@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-13drm/amdgpu: add support for PSP IP version 14.0.5Tim Huang3-0/+15
This initializes PSP IP version 14.0.5. Signed-off-by: Tim Huang <tim.huang@amd.com> Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-13drm/amdgpu: add support for SMU IP version 14.0.5Tim Huang4-0/+5
This initializes SMU IP version 14.0.5. Signed-off-by: Tim Huang <tim.huang@amd.com> Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-13drm/amdgpu: enable VCN/JPEG CGPG for GC IP version 11.5.3Tim Huang1-2/+8
Enable VCN/JPEG CGPG for ASIC with GFX version 11.5.3. Signed-off-by: Saleemkhan Jamadar <saleemkhan.jamadar@amd.com> Signed-off-by: Tim Huang <tim.huang@amd.com> Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-13drm/amdgpu: add support for MMHUB IP version 3.3.2Tim Huang2-0/+2
This initializes MMHUB IP version 3.3.2. Signed-off-by: Tim Huang <tim.huang@amd.com> Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-13drm/amdgpu: add support for NBIO IP version 7.11.2Tim Huang2-0/+2
This initializes NBIO IP version 7.11.2. Signed-off-by: Tim Huang <tim.huang@amd.com> Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-13drm/amdgpu: add support for SDMA IP version 6.1.3Tim Huang3-0/+4
This initializes SDMA IP version 6.1.3. Signed-off-by: Tim Huang <tim.huang@amd.com> Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-12 22:54:51 +0300