summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd
AgeCommit message (Collapse)AuthorFilesLines
2023-01-18drm/amdkfd: Support process XNACK mode dynamic changePhilip Yang3-16/+15
Update queue qpd is done for the first queue creation of the process, if the device support XNACK mode per process, update qpd setup sh_mem_config based on the process XNACK mode, to support the process destroy all queues, change XNACK mode, and then create queues. Add helper macro KFD_SUPPORT_XNACK_PER_PROCESS to remove duplicate code and add new ASICs support in future. Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-18drm/amd: Evaluate early init for all IP blocks even if one failsMario Limonciello1-1/+5
If early init fails for a single IP block, then no further IP blocks are evaluated. This means that if a user was missing more than one firmware binary they would have to keep adding binaries and re-probing until they discovered the ones missing. To make this easier, run early init for each IP block and report a single failure if not all passed. Reviewed-by: Aaron Liu <aaron.liu@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-18drm/amd: Remove needless break for legacy IP discovery MP0 9.0.0Mario Limonciello1-1/+0
There is already a "default" case in the switch block, so there is no need to have a break after the switch block. Reviewed-by: Aaron Liu <aaron.liu@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-18drm/amdgpu: fix cleaning up reserved VMID on releaseChristian König1-0/+1
We need to reset this or otherwise run into list corruption later on. Fixes: e44a0fe630c5 ("drm/amdgpu: rework reserved VMID handling") Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Tested-by: Candice Li <candice.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-18drm/amdgpu: Adjust ras support check condition for special asicYiPeng Chai1-1/+16
[Why]: Amdgpu ras uses amdgpu_ras_is_supported to check whether the ras block supports the ras function. amdgpu_ras_is_supported uses .ras_enabled to determine whether the ras function of the block is enabled. But for special asic with mem ecc enabled but sram ecc not enabled, some ras blocks support poison mode but their ras function is not enabled on .ras_enabled, these ras blocks will run abnormally. [How]: If the ras block is not supported on .ras_enabled but the asic supports poison mode and the ras block has ras configuration, it can be considered that the ras block supports ras function. Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-18drm/amdgpu: Remove unnecessary ras block support checkYiPeng Chai1-3/+0
[Why]: For special asic with mem ecc enabled but sram ecc not enabled, some ras blocks can register their ras configuration to ras list, but these ras blocks are not enabled on .ras_enabled, so it can not get ras block object using amdgpu_ras_get_ras_block. [How]: Remove ras block support check. Even if the ras block checked is not in the ras list, it will return a null pointer and will have no effect. Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-18drm/amdgpu: Perform gpu reset after gfx finishes processing ras poison ↵YiPeng Chai4-3/+31
consumption on gfx_v11_0_3 Perform gpu reset after gfx finishes processing ras poison consumption on gfx_v11_0_3. V2: Move gfx poison consumption handler from hw_ops to ip function level. V3: Adjust the calling position of amdgpu_gfx_poison_consumation_handler. V4: Since gfx v11_0_3 does not have .hw_ops instance, the .hw_ops null pointer check in amdgpu_ras_interrupt_poison_consumption_handler needs to be adjusted. Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-18drm/amdgpu: Add gfx cp ecc error irq handling on gfx v11_0_3YiPeng Chai1-0/+47
V2: Optimize gfx_v11_0_set_cp_ecc_error_state function. V3: Define macro constant for me pipe instance address interval. V5: Register and handle gfx cp ecc error irq on gfx v11_0_3. V6: Remove invalid intermediate function call. Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-18drm/amdgpu: Add gfx ras poison consumption irq handling on gfx v11_0_3YiPeng Chai4-1/+79
Add gfx ras poison consumption irq handling on gfx v11_0_3. V2: Move ras poison consumption irq handling code of gfx v11_0_3 to gfx_v11_0_3.c. V5: Create dedicated irq handler for RLC_GC_FED_INTERRUPT. V6: Remove invalid function call. Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-18amd/amdgpu: Add RLC_RLCS_FED_STATUS_* to gc v11_0_3 ip headersYiPeng Chai2-0/+58
V2: Add RLC_RLCS_FED_STATUS_0 and RLC_RLCS_FED_STATUS_1 register offset and shift masks. Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-18drm/amdgpu: Add gfx ras function on gfx v11_0_3YiPeng Chai6-0/+106
Add gfx ras function on gfx v11_0_3. V2: 1. Add separate source files for gfx v11_0_3. 2. Create a common function to initialize gfx ras block. V3: 1. Rename amdgpu_gfx_ras_block_init to amdgpu_gfx_ras_sw_init. 2. Adjust the calling position of amdgpu_gfx_ras_sw_init. 3. Remove gfx_v11_0_3_ras_ops. V4: Revert changes in amdgpu_ras_interrupt_poison_consumption_handler. V5: 1. Remove invalid include file in gfx_v11_0_3.c. 2. Reduce the number of parameters of amdgpu_gfx_ras_sw_init. Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-18drm/amd: Fix renoir/green sardine MP0 IP version detectionMario Limonciello1-6/+3
The existing codebase never had a case for detecting MP0 version on Renoir and instead relied upon hardcoded chip name. This was missed as part of the changes to migrate all IP blocks to build filenames from `amdgpu_ucode.c`. Consequently, Renoir tries to fetch a binary with 11_0_3 in the filename and since it's supposed to have "renoir" in the filename fails to probe. The fbdev still works though so the series worked. Add a case for Renoir into the legacy table to ensure the right ASD and TA firmware load again. Reported-by: Ekene Akuneme <Ekene.Akuneme@amd.com> Reported-by: Nicholas Choi <Nicholas.Choi@amd.com> Cc: Alex Hung <Alex.Hung@amd.com> Fixes: 994a97447e38 ("drm/amd: Parse both v1 and v2 TA microcode headers using same function") Fixes: 54a3e032340e ("drm/amd: Add a legacy mapping to "amdgpu_ucode_ip_version_decode"") Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-17drm/amd/display: 3.2.218Aric Cyr1-1/+1
This version brings along following fixes: - Revert patches that caused regressions associated with audio and an old change that checks the DCN version. - Refactor DDC and HDP. - Move DPIA and DPCD logic to new files. - Updates to DMUB. - Optimization and bug fixes for SUBVP/DRR. - Drop legacy code. Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-17drm/amd/display: hdcp not enabled on connector 0hersen wu1-7/+0
[Why] incorrect skip when drm_connector.index = 0 within event_property_validate and update [How] handle hdcp validate and update for connector 0 Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com> Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: hersen wu <hersenxs.wu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-17drm/amd/display: phase2 enable mst hdcp multiple displayshersen wu2-43/+122
[why] For MST topology with 1 physical link and multiple connectors (>=2), e.g. daisy cahined MST + SST, or 1-to-multi MST hub, if userspace set to enable the HDCP simultaneously on all connected outputs, the commit tail iteratively call the hdcp_update_display() for each display (connector). However, the hdcp workqueue data structure for each link has only one DM connector and encryption status members, which means the work queue of property_validate/update() would only be triggered for the last connector within this physical link, and therefore the HDCP property value of other connectors would stay on DESIRED instead of switching to ENABLED, which is NOT as expected. [how] Use array of AMDGPU_DM_MAX_DISPLAY_INDEX for both aconnector and encryption status in hdcp workqueue data structure for each physical link. For property validate/update work queue, we iterates over the array and do similar operation/check for each connected display. Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com> Signed-off-by: hersen wu <hersenxs.wu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-17drm/amd/display: Account for MPO planes in dcn32 mall alloc calculationsDillon Varone1-2/+3
[WHY?] Cannot only consider the MALL required from top pipes because of the MPO case. [HOW?] Only count a pipe if it fits the following criteria: 1) does not have a top pipe (is the topmost pipe for that plane) 2) it does have a top pipe, but that pipe is associated with a different plane Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com> Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Dillon Varone <Dillon.Varone@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-17drm/amd/display: Allow subvp on vactive pipes that are 2560x1440@60Alvin Lee2-1/+32
Enable subvp on specifically 1440p@60hz displays even though it can switch in vactive. Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-17drm/amd/display: Request min clocks after disabling pipes on initAlvin Lee1-0/+21
[Description] - Request min clocks after disabling pipes on init - This optimizes for power savings during init sequence - Also handles the case where we boot up with no display connected Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-17drm/amd/display: fix mapping to non-allocated addressBrandon Syu4-6/+19
[Why] There is an issue mapping non-allocated location of memory. It would allocate gpio registers from an array out of bounds. [How] Patch correct numbers of bounds for using. Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com> Reviewed-by: Martin Leung <Martin.Leung@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Brandon Syu <Brandon.Syu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-17drm/amd/display: Skip backlight control delay on external powered linksTony Tascioglu6-14/+17
[Why] When an eDP panel is powered externally from a different GPU, we can avoid waiting for hardware sequencing delays when switching the backlight on/off as the display backlight is no longer powered by the original source. [How] This commit extends the 'link_powered_externally' variable to allow bypassing hardware delays for additional backlight commands and force the backlight on/off when a link is powered by another GPU. Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com> Reviewed-by: Felipe Clark <felipe.clark@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Tony Tascioglu <tony.tascioglu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-17drm/amd/display: contional remove disable dig_fifo when blankCharlene Liu2-1/+3
keep dig_fifo enable for test pattern generation. Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com> Reviewed-by: Chris Park <Chris.Park@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Charlene Liu <Charlene.Liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-17drm/amd/display: Remove DISPCLK dentist programming for dcn32Dillon Varone1-5/+91
[WHY?] For dcn32, SMU handles DISPCLK dentist programming. [HOW?] Only use calls to SMU to set DISPCLK. Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Dillon Varone <Dillon.Varone@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-17drm/amd/display: Add extra mblk for DCCSaaem Rizvi1-5/+5
[Why] DCC meta was found to be detached from usable pixel data. Due to this DCC meta and the end of the fetched part of the frame will be on not be on the same mblk. Furthermore if the meta is not aligned to the mblk size, then we require an extra mblk in MALL to account for this. [How] Always add an additional mblk when DCC is enabled for detachment and misalignment. Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com> Reviewed-by: Dillon Varone <Dillon.Varone@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Saaem Rizvi <SyedSaaem.Rizvi@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-17drm/amd/display: set active bit for desktop with VSDBv3Dillon Varone1-6/+14
When using freesync on desktop, need to set freesync active bit for AMD VSDBv3 infopacket. Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com> Reviewed-by: Martin Leung <Martin.Leung@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Dillon Varone <Dillon.Varone@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-17drm/amd/display: Remove unused codeRodrigo Siqueira1-44/+0
Remove some code that is never used from freesync file. Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-17drm/amd/display: Optimize link power-down when link powered externallyTony Tascioglu7-15/+29
[Why] When an eDP panel is powered externally by a different GPU, we don't need to wait for hardware sequencing delays when powering down a link, as the display is not dependent on the GPU being powered down. [How] This commit adds a variable 'link_powered_externally' to indicate when a link is being powered by another GPU. Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com> Reviewed-by: Felipe Clark <felipe.clark@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Tony Tascioglu <tony.tascioglu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-17drm/amd/display: fix an error check condition for synced pipesAurabindo Pillai1-2/+13
Checking for disabled master pipe on a timing synchronized pipe is incorrect in the case of ODM combine. This case is acceptable as long as the disabled master pipe is part of the ODM tree. Skip printing error message if this condition holds true. Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com> Reviewed-by: Dillon Varone <Dillon.Varone@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-17Revert "drm/amd/display: Demote Error Level When ODM Transition Supported"Aurabindo Pillai1-12/+3
This reverts commit e81b6a4427f3ca37859f5b9fdb6a66683bb84e2e. Reverting to put in a better solution which does not involve checking DCN version. Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com> Reviewed-by: Dillon Varone <Dillon.Varone@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-17drm/amd/display: move dp capability related logic to link_dp_capabilityWenjing Liu26-2263/+2380
Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com> Reviewed-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-17drm/amd/display: move dp phy related logic to link_dp_phyWenjing Liu14-149/+210
Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com> Reviewed-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-17drm/amd/display: move dp link training logic to link_dp_trainingWenjing Liu22-4119/+4545
[why] Extract dp link training logic out to their own files. link_dp_training - high level training sequence and helper functions. link_dp_training_8b_10b - dp1.x training link_dp_training_auxless - aux-less training link_dp_traininig_dpia - dpia training link_dp_training_fixed_vs_pe_retimer - fixed vs pe retimer training link_dp_training_128b_132b - dp2.1 training Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com> Reviewed-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-17drm/amd/display: Remove SubVp support if src/dst rect does not equal stream ↵Saaem Rizvi1-0/+8
timing Current implementation of SubVP does not support cases where stream timing matched neither the destination rect nor the source rect. Will need to further debug to see how we can support these cases. Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com> Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Saaem Rizvi <SyedSaaem.Rizvi@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-17drm/amd/display: Change i2c speed for hdcpBhawanpreet Lakha1-1/+1
[why] HDCP 1.4 failed on SL8800 SW w/a test driver use. [how] slower down the HW i2c speed when used by HW i2c. Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com> Reviewed-by: Aurabindo Pillai <Aurabindo.Pillai@amd.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-17drm/amd/display: cleanup function args in dmlDillon Varone2-2/+2
Remove array size on array passed to CalculateDETSwathFillLatencyHiding. Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com> Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Dillon Varone <Dillon.Varone@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-17drm/amd/display: Use DML for MALL SS and Subvp allocation calculationsDillon Varone7-237/+134
MALL SS and Subvp use the same calculations for determining the size of the required allocation for a given surface, which is already done in DML. Add an interface to extract this information from VBA variables and use in their respective helper functions. Also refactor existing code to remove stale workarounds. Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com> Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Dillon Varone <Dillon.Varone@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-17drm/amd/display: Account for Subvp Phantoms in DML MALL surface calculationsDillon Varone3-4/+14
DML does not explicitly consider support for space in MALL required for subvp phantom pipes. This adds a check to make sure portion of phantom surface can fit in MALL. Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com> Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Dillon Varone <Dillon.Varone@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-17drm/amd/display: Account for DCC Meta pitch in DML MALL surface calculationsDillon Varone3-4/+12
DML incorrectly uses surface width for determining DCC meta size in MALL allocation calculations. Meta pitch should be used instead. Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com> Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Dillon Varone <Dillon.Varone@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-17drm/amd/display: Optimize subvp and drr validationDillon Varone1-16/+26
Two issues existed: 1) Configs that support DRR, but have it disabled will fail subvp+vblank validation incorrectly. Use subvp+vblank path for this case. 2) Configs that support DRR and have it enabled can use higher voltage level than required if they also support subvp+vblank. Use lowest supported voltage level for this case. Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com> Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Dillon Varone <Dillon.Varone@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-17drm/amdgpu: Add a missing tabDan Carpenter1-1/+1
This tab was deleted accidentally and triggers a Smatch warning: drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c:1006 gfx_v8_0_init_microcode() warn: inconsistent indenting Add it back. Fixes: 0aaafb7359d2 ("drm/amd: Use `amdgpu_ucode_*` helpers for GFX8") Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-16Merge tag 'drm-misc-next-2023-01-12' of ↵Dave Airlie1-0/+2
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for v6.3: UAPI Changes: * fourcc: Document Open Source user waiver Cross-subsystem Changes: * firmware: fix color-format selection for system framebuffers Core Changes: * format-helper: Add conversion from XRGB8888 to various sysfb formats; Make XRGB8888 the only driver-emulated legacy format * fb-helper: Avoid blank consoles from selecting an incorrect color format * probe-helper: Enable/disable HPD on connectors plus driver updates * Use drm_dbg_ helpers in several places * docs: Document defaults for CRTC backgrounds; Document use of drm_minor Driver Changes: * arm/hdlcd: Use new debugfs helpers * gud: Use new debugfs helpers * panel: Support Visionox VTDR6130 AMOLED DSI; Support Himax HX8394; Convert many drivers to common generic DSI write-sequence helper * v3d: Do not opencode drm_gem_object_lookup() * vc4: Various HVS an CRTC fixes * vkms: Fix SEGFAULT from incorrect GEM-buffer mapping * Convert various drivers to i2c probe_new() Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/Y8ADeSzZDj+tpibF@linux-uq9g
2023-01-16Merge tag 'amd-drm-next-6.3-2023-01-13' of ↵Dave Airlie66-1591/+996
https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-next-6.3-2023-01-13: amdgpu: - Fix possible segfault in failure case - Rework FW requests to happen in early_init for all IPs so that we don't lose the sbios console if FW is missing - PSR fixes - Misc cleanups - Unload fix - SMU13 fixes amdkfd: - Fix for cleared VRAM BOs - Fix cleanup if GPUVM creation fails - Memory accounting fix - Use resource_size rather than open codeing it - GC11 mGPU fix radeon: - Fix memory leak on shutdown Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230113225911.7776-1-alexander.deucher@amd.com
2023-01-16Merge tag 'amd-drm-next-6.3-2023-01-06' of ↵Dave Airlie135-994/+1962
https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-next-6.3-2023-01-06: amdgpu: - secure display support for multiple displays - DML optimizations - DCN 3.2 updates - PSR updates - DP 2.1 updates - SR-IOV RAS updates - VCN RAS support - SMU 13.x updates - Switch 1 element arrays to flexible arrays - Add RAS support for DF 4.3 - Stack size improvements - S0ix rework - Soft reset fix - Allow 0 as a vram limit on APUs - Display fixes - Misc code cleanups - Documentation fixes - Handle profiling modes for SMU13.x amdkfd: - Error handling fixes - PASID fixes radeon: - Switch 1 element arrays to flexible arrays drm: - Add DP adaptive sync DPCD definitions UAPI: - Add new INFO queries for peak and min sclk/mclk for profile modes on newer chips Proposed mesa patch: https://gitlab.freedesktop.org/mesa/drm/-/merge_requests/278 Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230106222037.7870-1-alexander.deucher@amd.com
2023-01-13drm/amd/display: add hubbub_init relatedCharlene Liu7-5/+88
Required by display init, also update get_dig_mode Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com> Reviewed-by: Hansen Dsouza <hansen.dsouza@amd.com> Reviewed-by: Duncan Ma <duncan.ma@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Charlene Liu <Charlene.Liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-13drm/amd/display: Update dmub header to match DMUBMustapha Ghaddar3-92/+109
[WHY] Last PR missed name of a struct to match in DMUB [HOW] Update the logic in dmub_cmh.h header Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com> Reviewed-by: Meenakshikumar Somasundaram <Meenakshikumar.Somasundaram@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Mustapha Ghaddar <mghaddar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-13drm/amdgpu: Skip specific mmhub and sdma registers accessing under sriovYifan Zha2-21/+23
[Why] SDMA0_CNTL and MMHUB system aperture related registers are blocked by L1 Policy. Therefore, they cannot be accessed by VF and loged in violation. [How] For MMHUB registers, they will be programmed by PF. So VF will skip to program them in mmhubv3_0. For SDMA0_CNTL which is a PF_only register, VF don't need to program it in sdma_v6_0. Signed-off-by: Yifan Zha <Yifan.Zha@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-13drm/amd/pm: Support RAS fatal error mode1 reset on smu v13_0_0 and v13_0_10Candice Li3-3/+48
Support RAS fatal error mode1 reset on smu v13_0_0 and v13_0_10. Signed-off-by: Candice Li <candice.li@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-13drm/amdgpu: Correct the power calcultion for Renior/Cezanne.jie1zhan1-1/+6
From smu firmware,the value of power is transferred in units of watts. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2321 Fixes: 137aac26a2ed ("drm/amdgpu/smu12: fix power reporting on renoir") Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com> Reviewed-by: Aaron Liu <aaron.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-13drm/amd: fix some dead code in `gfx_v9_0_init_cp_compute_microcode`Mario Limonciello1-5/+6
Some dead code was introduced as part of utilizing the `amdgpu_ucode_*` helpers. Adjust the control flow to make sure that firmware is released in the appropriate error flows. Reported-by: coverity-bot <keescook+coverity-bot@chromium.org> Addresses-Coverity-ID: 1530548 ("Control flow issues") Fixes: ec787deb2ddf ("drm/amd: Use `amdgpu_ucode_*` helpers for GFX9") Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-13drm/amd/display: move dc_link_dpia logic to link_dp_dpiaWenjing Liu6-8/+7
Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com> Reviewed-by: George Shen <George.Shen@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-13drm/amd/display: move dpcd logic from dc_link_dpcd to link_dpcdWenjing Liu18-24/+19
[why] Moving dpcd logic from dc_link_dpcd to link_dpcd as part of link file restructure Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com> Reviewed-by: George Shen <George.Shen@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-03 11:01:58 +0300