summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd
AgeCommit message (Collapse)AuthorFilesLines
2023-02-09drm/amd/display: fix read errors pertaining to dp_lttpr_status_show()Hamza Mahfooz1-50/+22
Currently, it is likely that we will read the relevant LTTPR caps after link training has completed (which can cause garbage data to be read), however according to the DP 2.0 spec that should be done before link training has commenced. So, instead of reading the registers on demand, use the values provided to us by DC. Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-02-09drm/amd/amdgpu: enable athub cg 11.0.3Kenneth Feng1-1/+3
enable athub cg on gc 11.0.3 Signed-off-by: Kenneth Feng <kenneth.feng@amd.com> Reviewed-by: Likun Gao <Likun.Gao@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-02-06drm/ttm: prevent moving of pinned BOsChristian König1-4/+0
We have checks for this in the individual drivers move callback, but it's probably better to generally forbid that on a higher level. Also stops exporting ttm_resource_compat() since that's not necessary any more after removing the extra checks in vmwgfx. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Signed-off-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230130120636.63765-6-matthew.auld@intel.com
2023-02-03Revert "drm/amd/display: disable S/G display on DCN 3.1.4"Alex Deucher1-0/+1
This reverts commit 9aa15370819294beb7eb67c9dcbf654d79ff8790. This is fixed now so we can re-enable S/G display on DCN 3.1.4. Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-02-03Revert "Revert "drm/amdgpu/gmc11: enable AGP aperture""Alex Deucher4-9/+12
This reverts commit 1a65327a84db5b9081a51ccb1c562083f59bfcec. This should be resolved so we can re-enable this. Also, the AGP apeture was bring programmed to 0 on MMHUB 3.0.1 since agp_start and end were not being set. Acked-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-02-03drm/amd/display: properly handling AGP aperture in vm setupAlex Deucher1-14/+28
Take into account whether or not the AGP aperture is enabled or not when calculating the system aperture. Fixes white screens with DCN 3.1.4. Based on a patch from Yifan Zhang <yifan1.zhang@amd.com> Cc: Yifan Zhang <yifan1.zhang@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-02-03drm/amd/display: disable S/G display on DCN 3.1.2/3Alex Deucher1-2/+0
Causes flickering or white screens in some configurations. Disable it for now until we can fix the issue. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2352 Cc: roman.li@amd.com Cc: yifan1.zhang@amd.com Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-02-03drm/amd/display: disable S/G display on DCN 2.1.0Alex Deucher1-1/+0
Causes flickering or white screens in some configurations. Disable it for now until we can fix the issue. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2352 Cc: roman.li@amd.com Cc: yifan1.zhang@amd.com Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-02-03drm/amdgpu: Remove writing GRBM_GFX_CNTL in RLCG interface under SRIOVYifan Zha1-2/+0
[Why] Accessing GRBM_GFX_CNTL in full access time has risk when VF is doing MMIO attacking. Therefore, VF writing GRBM_GFX_CNTL are blocked by L1 Policy. For RLCG interface, RLCG use SCRATCH_REG2 which is copied from GRBM_GFX_CNTL. [How] Remove writing GRBM_GFX_CNTL in amdgpu_virt_rlcg_reg_rw. v2: Remove directly writing GRBM_GFX_INDEX in amdgpu_virt_rlcg_reg_rw as RLCG interface no need to use it. Signed-off-by: Yifan Zha <Yifan.Zha@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-02-03drm/amdgpu: always sending PSP messages LOAD_ASD and UNLOAD_TAVitaly Prosyak1-3/+13
We allow sending PSP messages LOAD_ASD and UNLOAD_TA without acquiring a lock in drm_dev_enter during driver unload because we must call drm_dev_unplug as the beginning of unload driver sequence. Added WARNING if other PSP messages are sent without a lock. After this commit, the following commands would work -sudo modprobe -r amdgpu -sudo modprobe amdgpu Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com> Reviewed-by Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-02-03drm/amd/display: Trivial swizzle-related code clean-upsGuilherme G. Piccoli3-11/+4
This is a very trivial code clean-up related to commit 5468c36d6285 ("drm/amd/display: Filter Invalid 420 Modes for HDMI TMDS"). This commit added a validation on driver probe to prevent invalid TMDS modes, but one of the fake properties (swizzle) ended-up causing a warning on driver probe; was reported here: https://gitlab.freedesktop.org/drm/amd/-/issues/2264. It was fixed by commit a1cbe6916f44 ("drm/amd/display: patch cases with unknown plane state to prevent warning"), but the validation code had a double variable assignment, which we hereby remove. Also, the fix relies in the dcn2{0,1}patch_unknown_plane_state() callbacks, so while at it we took the opportunity to perform a small code clean-up in such routines. Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Daniel Wheeler <daniel.wheeler@amd.com> Cc: Fangzhi Zuo <Jerry.Zuo@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Leo Li <sunpeng.li@amd.com> Cc: Mark Broadworth <mark.broadworth@amd.com> Cc: Melissa Wen <mwen@igalia.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Sung Joon Kim <Sungjoon.Kim@amd.com> Cc: Swapnil Patel <Swapnil.Patel@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-02-03drm/amd/display: reduce else-if to else in dcn32_calculate_dlg_params()Tom Rix1-1/+1
cppcheck reports drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c:1403:76: style: Expression is always true because 'else if' condition is opposite to previous condition at line 1396. [multiCondition] } else if (context->res_ctx.pipe_ctx[i].stream->mall_stream_config.type == SUBVP_PHANTOM) { ^ drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c:1396:69: note: first condition if (context->res_ctx.pipe_ctx[i].stream->mall_stream_config.type != SUBVP_PHANTOM) { ^ drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c:1403:76: note: else if condition is opposite to first condition } else if (context->res_ctx.pipe_ctx[i].stream->mall_stream_config.type == SUBVP_PHANTOM) { It is not necessary to explicitly the check != condition, an else is simplier. Fixes: 238debcaebe4 ("drm/amd/display: Use DML for MALL SS and Subvp allocation calculations") Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-02-03drm/amd/display: reduce else-if to else in dcn10_blank_pixel_data()Tom Rix1-1/+1
checkpatch reports drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c:2902:13: style: Expression is always true because 'else if' condition is opposite to previous condition at line 2895. [multiCondition] } else if (blank) { ^ drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c:2895:6: note: first condition if (!blank) { ^ drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c:2902:13: note: else if condition is opposite to first condition } else if (blank) { It is not necessary to explicitly the check != condition, an else is simplier. Fixes: aa5a57773042 ("drm/amd/display: Vari-bright looks disabled near end of MM14") Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-02-03drm/amdgpu/display: remove duplicate include header in filesye xingchen1-1/+0
opp.h is included more than once. Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-02-03drm/amdgpu: Fix a typo ("boradcast")Jonathan Neuschäfer1-1/+1
Spell it as "broadcast". Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-02-03drm/amdgpu: fix memory leak in amdgpu_cs_sync_ringsBert Karwatzki1-1/+4
amdgpu_sync_get_fence deletes the returned fence from the syncobj, so the refcount of fence needs to lowered to avoid a memory leak. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2360 Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Bert Karwatzki <spasswolf@web.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/3b590ba0f11d24b8c6c39c3d38250129c1116af4.camel@web.de
2023-02-02drm/amd/display: Properly handle additional cases where DCN is not supportedAlex Deucher1-0/+11
There could be boards with DCN listed in IP discovery, but no display hardware actually wired up. In this case the vbios display table will not be populated. Detect this case and skip loading DM when we detect it. v2: Mark DCN as harvested as well so other display checks elsewhere in the driver are handled properly. Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-02-02drm/amdgpu: Enable vclk dclk node for gc11.0.3Yiqing Yao1-2/+4
These sysfs nodes are tested supported, so enable them. Signed-off-by: Yiqing Yao <yiqing.yao@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-02-02drm/amd: Fix initialization for nbio 4.3.0Mario Limonciello1-1/+7
A mistake has been made on some boards with NBIO 4.3.0 where some NBIO registers aren't properly set by the hardware. Ensure that they're set during initialization. Cc: Natikar Basavaraj <Basavaraj.Natikar@amd.com> Tested-by: Satyanarayana ReddyTVN <Satyanarayana.ReddyTVN@amd.com> Tested-by: Rutvij Gajjar <Rutvij.Gajjar@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.1.x
2023-02-02drm/amdgpu: enable HDP SD for gfx 11.0.3Evan Quan1-1/+2
Enable HDP clock gating control for gfx 11.0.3. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-02-02drm/amd/pm: drop unneeded dpm features disablement for SMU 13.0.4/11Tim Huang1-0/+14
PMFW will handle the features disablement properly for gpu reset case, driver involvement may cause some unexpected issues. Cc: stable@vger.kernel.org # 6.1 Signed-off-by: Tim Huang <tim.huang@amd.com> Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-02-02drm/amd/display: Reset DMUB mailbox SW state after HW resetNicholas Kazlauskas1-0/+12
[Why] Otherwise we can be out of sync with what's in the hardware, leading to us rerunning every command that's presently in the ringbuffer. [How] Reset software state for the mailboxes in hw_reset callback. This is already done as part of the mailbox init in hw_init, but we do need to remember to reset the last cached wptr value as well here. Reviewed-by: Hansen Dsouza <hansen.dsouza@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-02-02drm/amd/display: Unassign does_plane_fit_in_mall function from dcn3.2George Shen1-1/+1
[Why] The hwss function does_plane_fit_in_mall not applicable to dcn3.2 asics. Using it with dcn3.2 can result in undefined behaviour. [How] Assign the function pointer to NULL. Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: George Shen <george.shen@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-02-02drm/amd/display: Adjust downscaling limits for dcn314Daniel Miess1-2/+3
[Why] Lower max_downscale_ratio and ARGB888 downscale factor to prevent cases where underflow may occur on dcn314 [How] Set max_downscale_ratio to 400 and ARGB downscale factor to 250 for dcn314 Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Daniel Miess <Daniel.Miess@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-02-02drm/amd/display: Add missing brackets in calculationDaniel Miess1-1/+1
[Why] Brackets missing in the calculation for MIN_DST_Y_NEXT_START [How] Add missing brackets for this calculation Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Daniel Miess <Daniel.Miess@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-02-02drm/amdgpu: update wave data type to 3 for gfx11Graham Sider1-2/+2
SQ_WAVE_INST_DW0 isn't present on gfx11 compared to gfx10, so update wave data type to signify a difference. Signed-off-by: Graham Sider <Graham.Sider@amd.com> Reviewed-by: Mukul Joshi <Mukul.Joshi@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.1.x
2023-01-31drm/amd/display: Properly handle additional cases where DCN is not supportedAlex Deucher1-0/+11
There could be boards with DCN listed in IP discovery, but no display hardware actually wired up. In this case the vbios display table will not be populated. Detect this case and skip loading DM when we detect it. v2: Mark DCN as harvested as well so other display checks elsewhere in the driver are handled properly. Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-31drm/amdgpu: Enable vclk dclk node for gc11.0.3Yiqing Yao1-2/+4
These sysfs nodes are tested supported, so enable them. Signed-off-by: Yiqing Yao <yiqing.yao@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-31drm/amd: Fix initialization for nbio 4.3.0Mario Limonciello1-1/+7
A mistake has been made on some boards with NBIO 4.3.0 where some NBIO registers aren't properly set by the hardware. Ensure that they're set during initialization. Cc: Natikar Basavaraj <Basavaraj.Natikar@amd.com> Tested-by: Satyanarayana ReddyTVN <Satyanarayana.ReddyTVN@amd.com> Tested-by: Rutvij Gajjar <Rutvij.Gajjar@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-31drm/amdgpu: enable HDP SD for gfx 11.0.3Evan Quan1-1/+2
Enable HDP clock gating control for gfx 11.0.3. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-31drm/amd/pm: drop unneeded dpm features disablement for SMU 13.0.4/11Tim Huang1-0/+14
PMFW will handle the features disablement properly for gpu reset case, driver involvement may cause some unexpected issues. Cc: stable@vger.kernel.org # 6.1 Signed-off-by: Tim Huang <tim.huang@amd.com> Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-31drm/amd/display: 3.2.221Aric Cyr1-1/+1
This version brings along following fixes: - fix linux dp link lost handled only one time - Reset DMUB mailbox SW state after HW reset - Unassign does_plane_fit_in_mall function from dcn3.2 - Add Function delaration in dc_link - Fix crash when connecting 2 displays with video playback - Adjust downscaling limits for dcn314 - fix FCLK pstate change underflow - Fix only one ABM pipe enabled under ODM combined case - Add missing brackets in calculation - Correct bw_params population - Fix Z8 support configurations - Add Debug Log for MST and PCON - fix MALL size hardcoded for DCN321 - add rc_params_override option in dc_dsc_config - Enable Freesync over PCon Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-31drm/amd/display: fix linux dp link lost handled only one timeHersen Wu2-3/+24
[Why] linux amdgpu defer handle link lost irq. dm add handle request to irq work queue for the first irq of link lost. if link training fails for link lost handle, link will not be enabled anymore. [How] allow adding handle request of link lost to work queue before running dp link training for link lost. Signed-off-by: Hersen Wu <hersenxs.wu@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-31drm/amd/display: Reset DMUB mailbox SW state after HW resetNicholas Kazlauskas1-0/+12
[Why] Otherwise we can be out of sync with what's in the hardware, leading to us rerunning every command that's presently in the ringbuffer. [How] Reset software state for the mailboxes in hw_reset callback. This is already done as part of the mailbox init in hw_init, but we do need to remember to reset the last cached wptr value as well here. Reviewed-by: Hansen Dsouza <hansen.dsouza@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-31drm/amd/display: Unassign does_plane_fit_in_mall function from dcn3.2George Shen1-1/+1
[Why] The hwss function does_plane_fit_in_mall not applicable to dcn3.2 asics. Using it with dcn3.2 can result in undefined behaviour. [How] Assign the function pointer to NULL. Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: George Shen <george.shen@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-31drm/amd/display: Add Function declaration in dc_linkMustapha Ghaddar2-24/+27
[WHY] Housekeeping cleaning and adding declaration for function to be called from DM layer [HOW] Adding public functions to dc_link.h Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Mustapha Ghaddar <mghaddar@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-31drm/amd/display: Revert "avoid disable otg when dig was disabled"Aric Cyr1-20/+6
This reverts commit 7cf5ceb30d4d527d763ae78c5405e3faca1fb8b1. Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-31drm/amd/display: Adjust downscaling limits for dcn314Daniel Miess1-2/+3
[Why] Lower max_downscale_ratio and ARGB888 downscale factor to prevent cases where underflow may occur on dcn314 [How] Set max_downscale_ratio to 400 and ARGB downscale factor to 250 for dcn314 Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Daniel Miess <Daniel.Miess@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-31drm/amd/display: fix FCLK pstate change underflowVladimir Stempen1-0/+4
[Why] Currently we set FCLK p-state change watermark calculated based on dummy p-state latency when UCLK p-state is not supported [How] Calculate FCLK p-state change watermark based on on FCLK pstate change latency in case UCLK p-state is not supported Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Vladimir Stempen <vladimir.stempen@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-31drm/amd/display: Fix only one ABM pipe enabled under ODM combined caseLeon Huang1-0/+9
[Why] ABM set pipe before updating ODM status, it leads to incorrect ABM pipe setting when enabling ODM combine. [How] Call ABM set pipe flow after ODM status update in program pipe sequence. Reviewed-by: Chun-Liang Chang <Chun-Liang.Chang@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Leon Huang <Leon.Huang1@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-31drm/amd/display: Add missing brackets in calculationDaniel Miess1-1/+1
[Why] Brackets missing in the calculation for MIN_DST_Y_NEXT_START [How] Add missing brackets for this calculation Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Daniel Miess <Daniel.Miess@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-31drm/amd/display: Correct bw_params populationDaniel Miess1-10/+21
[Why] Underflow observed during P010 video playback on dcn314 due to incorrectly populated bw_params [How] Populate fclk, memclk and voltage in bw_params with values from max pstate rather than min pstate Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Daniel Miess <Daniel.Miess@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-31drm/amd/display: Fix Z8 support configurationsNicholas Kazlauskas1-7/+7
[Why] It's not supported in multi-display, but it is supported in 2nd eDP screen only. [How] Remove multi display support, restrict number of planes for all z-states support, but still allow Z8 if we're not using PWRSEQ0. Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-31drm/amd/display: Add Debug Log for MST and PCONFangzhi Zuo3-1/+26
Add log for MST/PCON specific use case: 1. If DP1.2 hub where gives reduced link bw and no dsc support. 2. If less than 4-lane configuration where gives reduced bw. 3. If FRL PCON enabled for asic. 4. Track MST sink count. Reviewed-by: Hersen Wu <Hersenxs.Wu@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-31drm/amd/display: fix MALL size hardcoded for DCN321Samson Tam1-1/+0
[Why] MALL size available can vary for different SKUs MALL size was still hardcoded for DCN321 [How] Remove hardcoding MALL size for DCN321 Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Samson Tam <Samson.Tam@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-31drm/amd/display: add rc_params_override option in dc_dsc_configWenjing Liu4-7/+68
[why] Current RC params are based on VESA recommended configurations. Some DSC sink may prefer non standard rc params values due to hardware limitations. To support those DSC sink we will allow DM to optionally pass rc_params_ovrd in dc_dsc_config so DC will override the default VESA recommended configurations. Reviewed-by: Martin Leung <Martin.Leung@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-31drm/amd/display: Enable Freesync over PConSung Joon Kim7-37/+118
[why] Enable Freesync over PCon on Linux environment. [how] Adding Freesync over PCon support in amdgpu_dm - Read DPCD for Freesync over PCon capabilitiy - Add whitelist for compatible branch devices Reviewed-by: Chao-kai Wang <Stylon.Wang@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Sung Joon Kim <sungkim@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-31drm/amdgpu: update wave data type to 3 for gfx11Graham Sider1-2/+2
SQ_WAVE_INST_DW0 isn't present on gfx11 compared to gfx10, so update wave data type to signify a difference. Signed-off-by: Graham Sider <Graham.Sider@amd.com> Reviewed-by: Mukul Joshi <Mukul.Joshi@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-31drm/amd: Allow s0ix without BIOS supportMario Limonciello1-6/+2
We guard the suspend entry code from running unless we have proper BIOS support for either S3 mode or s0ix mode. If a user's system doesn't support either of these modes the kernel still does offer s2idle in `/sys/power/mem_sleep` so there is an expectation from users that it works even if the power consumption remains very high. Rafael Ávila de Espíndola reports that a system of his has a non-functional graphics stack after resuming. That system doesn't support S3 and the FADT doesn't indicate support for low power idle. Through some experimentation it was concluded that even without the hardware s0i3 support provided by the amd_pmc driver the power consumption over suspend is decreased by running amdgpu's s0ix suspend routine. The numbers over suspend showed: * No patch: 9.2W * Skip amdgpu suspend entirely: 10.5W * Run amdgpu s0ix routine: 7.7W As this does improve the power, remove some of the guard rails in `amdgpu_acpi.c` for only running s0ix suspend routines in the right circumstances. However if this turns out to cause regressions for anyone, we should revert this change and instead opt for skipping suspend/resume routines entirely or try to fix the underlying behavior that makes graphics fail after resume without underlying platform support. Reported-by: Rafael Ávila de Espíndola <rafael@espindo.la> Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2364 Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-31Revert "drm/amdgpu: TA unload messages are not actually sent to psp when ↵Vitaly Prosyak2-3/+4
amdgpu is uninstalled" This reverts commit fac53471d0ea9693d314aa2df08d62b2e7e3a0f8. The following change: move the drm_dev_unplug call after amdgpu_driver_unload_kms in amdgpu_pci_remove. The reason is the following: amdgpu_pci_remove calls drm_dev_unregister and it should be called first to ensure userspace can't access the device instance anymore. If we call drm_dev_unplug after amdgpu_driver_unload_kms then we observe IGT PCI software unplug test failure (kernel hung) for all ASICs. This is how this regression was found. After this revert, the following commands do work not, but it would be fixed in the next commit: - sudo modprobe -r amdgpu - sudo modprobe amdgpu Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com> Reviewed-by Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-01 18:59:00 +0300