summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd
AgeCommit message (Collapse)AuthorFilesLines
2020-07-27drm/amd/display: Use seperate dmcub firmware for navy_flounderBhawanpreet Lakha1-1/+6
[Why] Currently navy_flounder is using sienna_cichlid_dmcub.bin. [How] Create a seperate define so navy_flounder will use its own firmware. Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-27drm/amd/display: Check lane status again after link training doneMartin Tsai2-0/+52
[Why] Some monitors could suffer symbol unlock but cannot send HPD IRQ to notic source device to handle link loss. This makes monitor stuck in abnormal status and causes black screen. [How] According to the suggestion from scalar vendor, to check lane status again after link training done. That can improve the comaptibility from current production monitors. Signed-off-by: Martin Tsai <martin.tsai@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-27drm/amd/display: Don't compare dppclk before updating DTOAlvin Lee1-3/+4
[Why] In dcn3_update_clocks there are situations where dppclk is not lowered (i.e. stays the same), but DTO still needs to be increased before we program pipe frontend (i.e. in prepare_bandwidth). If we don't program the new DTO value before we program the pipe, we will underflow as soon as the pipe lock is released until the next call to dcn3_update_clocks where the DTO is updated. [How] Remove dppclk check before programming new DTO value. Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-27drm/amd/display: Fix naming of DSC Debugfs entryEryk Brol1-4/+5
[why] Fix naming and return bits rather than bytes per pixel for naming consistency. Because registers return Bytes per pixel, but DSC Config structure is expecting bits per pixel as input. So when returning the value convert from bytes into bits. Signed-off-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Mikita Lipski <mikita.lipski@amd.com> Reviewed-by: Mikita Lipski <Mikita.Lipski@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-27drm/amd/display: Rename bytes_pp to the correct bits_ppEryk Brol4-4/+6
[Why] Struct dcn_dsc_state is used for reading current state and parameters of DSC on a pipe, the target rate parameter uses bytes per pixel even though its reading BITS_PER_PIXEL register. [How] Changing it to Bits Per Pixel for consistency. Signed-off-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Mikita Lipski <mikita.lipski@amd.com> Reviewed-by: Mikita Lipski <Mikita.Lipski@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-27drm/amd/display: Clean up global sync param retrievalDmytro Laktyushkin3-63/+7
[Why] This change replaces older looping code in favor of these functions. [How] There are built in functions for extracting global sync params during mode validation now. Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-27drm/amd/swsmu: allow asic to handle sensor type by itselfKevin Wang1-2/+7
1. allow asic to handle sensor type by itself. 2. if not, use smu common sensor to handle it. Signed-off-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-27drm/amdgpu: add support for umc 8.7 ras functionsJohn Clements2-0/+382
added support for umc 8.7 error reporting and query Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: John Clements <john.clements@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-27drm/amd/powerplay: update driver if file for sienna_cichlidLikun Gao3-10/+24
Update sienna_cichlid driver if header and related files. Support new smu metrics for pre & postDS frequency. Signed-off-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-27drm/amdgpu: add umc v8_7_0 IP headersJohn Clements2-0/+112
the change introduces IP headers for unified memory controller (umc) Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: John Clements <john.clements@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-27drm/amd/powerplay: revise the outputs layout of amdgpu_pm_info debugfsEvan Quan1-8/+11
The current outputs of amdgpu_pm_info debugfs come with clock gating status and followed by current clock/power information. However the clock gating status retrieving may pull GFX out of CG status. That will make the succeeding clock/power information retrieving inaccurate. To overcome this and be with minimum impact, the outputs are updated to show current clock/power information first. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-27Revert "drm/amdgpu/vcn3.0: remove extra asic type check"James Zhu1-13/+16
This reverts commit 058c07201ec7d373fc6a0a570b38a8a9d62c29fb. Chip NAVY_FLOUNDER uses vcn3.0, but it has only one VCN instance. Signed-off-by: James Zhu <James.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-27drm/amdkfd: Fix spurious debug exception on gfx10Jay Cornwall2-90/+95
s_barrier triggers a debug exception when issued with PRIV=1, DEBUG_EN=1. This causes spurious notifications to rocm-gdb. Clear MODE before issuing s_barrier and restore MODE afterwards in the context restore handler. Signed-off-by: Jay Cornwall <jay.cornwall@amd.com> Tested-by: Laurent Morichetti <laurent.morichetti@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-27drm/amd/powerplay: drop unnecessary message support check(v2)Changfeng2-10/+1
Take back patch:drop unnecessary message support check Because the gpu reset fail problem on renoir can be fixed by: drm/amd/powerplay: skip invalid msg when smu set mp1 state It needs to remove SWSMU_CODE_LAYER_L1 in smu_cmn.h to guard a clear code layer. Signed-off-by: changfeng <Changfeng.Zhu@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-27drm/amdkfd: Add thermal throttling SMI eventMukul Joshi9-17/+72
Add support for reporting thermal throttling events through SMI. Also, add a counter to count the number of throttling interrupts observed and report the count in the SMI event message. Signed-off-by: Mukul Joshi <mukul.joshi@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-27drm/amdgpu: fix system hang issue during GPU resetDennis Li39-183/+463
when GPU hang, driver has multi-paths to enter amdgpu_device_gpu_recover, the atomic adev->in_gpu_reset and hive->in_reset are used to avoid re-entering GPU recovery. During GPU reset and resume, it is unsafe that other threads access GPU, which maybe cause GPU reset failed. Therefore the new rw_semaphore adev->reset_sem is introduced, which protect GPU from being accessed by external threads during recovery. v2: 1. add rwlock for some ioctls, debugfs and file-close function. 2. change to use dqm->is_resetting and dqm_lock for protection in kfd driver. 3. remove try_lock and change adev->in_gpu_reset as atomic, to avoid re-enter GPU recovery for the same GPU hang. v3: 1. change back to use adev->reset_sem to protect kfd callback functions, because dqm_lock couldn't protect all codes, for example: free_mqd must be called outside of dqm_lock; [ 1230.176199] Hardware name: Supermicro SYS-7049GP-TRT/X11DPG-QT, BIOS 3.1 05/23/2019 [ 1230.177221] Call Trace: [ 1230.178249] dump_stack+0x98/0xd5 [ 1230.179443] amdgpu_virt_kiq_reg_write_reg_wait+0x181/0x190 [amdgpu] [ 1230.180673] gmc_v9_0_flush_gpu_tlb+0xcc/0x310 [amdgpu] [ 1230.181882] amdgpu_gart_unbind+0xa9/0xe0 [amdgpu] [ 1230.183098] amdgpu_ttm_backend_unbind+0x46/0x180 [amdgpu] [ 1230.184239] ? ttm_bo_put+0x171/0x5f0 [ttm] [ 1230.185394] ttm_tt_unbind+0x21/0x40 [ttm] [ 1230.186558] ttm_tt_destroy.part.12+0x12/0x60 [ttm] [ 1230.187707] ttm_tt_destroy+0x13/0x20 [ttm] [ 1230.188832] ttm_bo_cleanup_memtype_use+0x36/0x80 [ttm] [ 1230.189979] ttm_bo_put+0x1be/0x5f0 [ttm] [ 1230.191230] amdgpu_bo_unref+0x1e/0x30 [amdgpu] [ 1230.192522] amdgpu_amdkfd_free_gtt_mem+0xaf/0x140 [amdgpu] [ 1230.193833] free_mqd+0x25/0x40 [amdgpu] [ 1230.195143] destroy_queue_cpsch+0x1a7/0x270 [amdgpu] [ 1230.196475] pqm_destroy_queue+0x105/0x260 [amdgpu] [ 1230.197819] kfd_ioctl_destroy_queue+0x37/0x70 [amdgpu] [ 1230.199154] kfd_ioctl+0x277/0x500 [amdgpu] [ 1230.200458] ? kfd_ioctl_get_clock_counters+0x60/0x60 [amdgpu] [ 1230.201656] ? tomoyo_file_ioctl+0x19/0x20 [ 1230.202831] ksys_ioctl+0x98/0xb0 [ 1230.204004] __x64_sys_ioctl+0x1a/0x20 [ 1230.205174] do_syscall_64+0x5f/0x250 [ 1230.206339] entry_SYSCALL_64_after_hwframe+0x49/0xbe 2. remove try_lock and introduce atomic hive->in_reset, to avoid re-enter GPU recovery. v4: 1. remove an unnecessary whitespace change in kfd_chardev.c 2. remove comment codes in amdgpu_device.c 3. add more detailed comment in commit message 4. define a wrap function amdgpu_in_reset v5: 1. Fix some style issues. Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Suggested-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Suggested-by: Christian König <christian.koenig@amd.com> Suggested-by: Felix Kuehling <Felix.Kuehling@amd.com> Suggested-by: Lijo Lazar <Lijo.Lazar@amd.com> Suggested-by: Luben Tukov <luben.tuikov@amd.com> Signed-off-by: Dennis Li <Dennis.Li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-27drm/amdgpu: update dec ring test for VCN 3.0Boyuan Zhang1-1/+1
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com> Reviewed-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-27drm/amd/display: remove redundant initialization of variable resultColin Ian King1-1/+1
The variable result is being initialized with a value that is never read and it is being updated later with a new value. The initialization is redundant and can be removed. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-27drm/amdgpu/vcn3.0: remove extra asic type checkJames Zhu1-16/+13
vcn ip block is already selected based on ASIC type during set_ip_blocks. Signed-off-by: James Zhu <James.Zhu@amd.com> Reviewed-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-27drm/amdgpu/jpeg3.0: remove extra asic type checkJames Zhu1-5/+4
jpeg ip block is already selected based on ASIC type during set_ip_blocks. Signed-off-by: James Zhu <James.Zhu@amd.com> Reviewed-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-27drm/amdkfd: Unify gfx9/gfx10 context save area layoutsLaurent Morichetti2-464/+468
Add some padding before the MODE register in the HWREGs block to preserve the same layout as gfx9. This simplifies implementation of a user-mode debugger. Signed-off-by: Laurent Morichetti <laurent.morichetti@amd.com> Reviewed-by: Jay Cornwall <jay.cornwall@amd.com> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-27drm/amd/amdgpu: Add RLC_CGTT_MGCG_OVERRIDE to gfx 10.3 headersTom St Denis2-0/+27
Signed-off-by: Tom St Denis <tom.stdenis@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-27drm/amdgpu: Remove extra asic type checkJames Zhu1-17/+12
vcn ip block is already selected based on ASIC type during set_ip_blocks Signed-off-by: James Zhu <James.Zhu@amd.com> Reviewed-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-27drm/amdgpu/jpeg: Remove extra asic type checkJames Zhu1-15/+11
jpeg ip block is already selected based on ASIC type during set_ip_blocks. Signed-off-by: James Zhu <James.Zhu@amd.com> Reviewed-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-27Merge tag 'amd-drm-next-5.9-2020-07-24' of ↵Dave Airlie53-1950/+3002
git://people.freedesktop.org/~agd5f/linux into drm-next amd-drm-next-5.9-2020-07-24: amdgpu: - Misc sienna cichlid fixes - Final bits of swSMU cleanup - Misc display fixes - Misc VCN fixes - Eeprom i2c cleanup - Drop amd vrr_range debugfs in favor of core drm Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200724205712.3913-1-alexander.deucher@amd.com
2020-07-24Merge v5.8-rc6 into drm-nextDave Airlie2-2/+2
I've got a silent conflict + two trees based on fixes to merge. Fixes a silent merge with amdgpu Signed-off-by: Dave Airlie <airlied@redhat.com>
2020-07-23drm/amdgpu/powerplay: add some documentation about memory clockAlex Deucher1-0/+46
We expose the actual memory controller clock rate in Linux, not the effective memory clock of the DRAMs. To translate it, it follows the following formula: Clock conversion (Mhz): HBM: effective_memory_clock = memory_controller_clock * 1 G5: effective_memory_clock = memory_controller_clock * 1 G6: effective_memory_clock = memory_controller_clock * 2 DRAM data rate (MT/s): HBM: effective_memory_clock * 2 = data_rate G5: effective_memory_clock * 4 = data_rate G6: effective_memory_clock * 8 = data_rate Bandwidth (MB/s): data_rate * vram_bit_width / 8 = memory_bandwidth Some examples: G5 on RX460: memory_controller_clock = 1750 Mhz effective_memory_clock = 1750 Mhz * 1 = 1750 Mhz data rate = 1750 * 4 = 7000 MT/s memory_bandwidth = 7000 * 128 bits / 8 = 112000 MB/s G6 on RX5600: memory_controller_clock = 900 Mhz effective_memory_clock = 900 Mhz * 2 = 1800 Mhz data rate = 1800 * 8 = 14400 MT/s memory_bandwidth = 14400 * 192 bits / 8 = 345600 MB/s Acked-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-23drm/amdgpu: Remove redundant NULL checkLi Heng1-2/+1
Fix below warnings reported by coccicheck: ./drivers/gpu/drm/amd/display/dc/clk_mgr/dcn30/dcn30_clk_mgr.c:557:2-7: WARNING: NULL check before some freeing functions is not needed. Fixes: 4d55b0dd1cdd ("drm/amd/display: Add DCN3 CLK_MGR") Signed-off-by: Li Heng <liheng40@huawei.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-23drm/amdgpu: move umc specific macros to headerJohn Clements2-14/+14
certain umc macros are common across umc versions Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: John Clements <john.clements@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-23drm/amdgpu: update golden setting for sienna_cichlidLikun Gao1-1/+1
Update golden setting for sienna_cichlid. Signed-off-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-23drm/amd/powerplay: correct smu message for vf modeLikun Gao1-35/+35
Set valid_in_vf to false for the message not support in vf mode on sienna cichlid. Signed-off-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-23drm/amd/powerplay: add msg map for mode1 resetLikun Gao1-0/+1
Mapping Mode1Reset message for sienna_cichlid. Signed-off-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-23drm/amd/powerplay: skip invalid msg when smu set mp1 stateLikun Gao1-0/+3
Some asic may not support for some message of set mp1 state. If the return value of smu_send_smc_msg is -EINVAL, that means it failed to send msg to smc as it can not map an valid message for the ASIC. And with that case, smu_set_mp1_state should be skipped as those ASIC was in fact do not support for that. Signed-off-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-23Merge tag 'amd-drm-next-5.9-2020-07-17' of ↵Dave Airlie154-3011/+5136
git://people.freedesktop.org/~agd5f/linux into drm-next amd-drm-next-5.9-2020-07-17: amdgpu: - SI UVD/VCE clock support - Updates for Sienna Cichlid - Expose drm rotation property - Atomfirmware updates for renoir - updates to GPUVM hub handling for different register layouts - swSMU restructuring and cleanups - RAS fixes - DC fixes - mode1 reset support for Sienna Cichlid - Add support for Navy Flounder GPUs amdkfd: - Add SMI events watch interface UAPI: - Add amdkfd SMI events watch interface Userspace which uses this interface: https://github.com/RadeonOpenCompute/rocm_smi_lib/commit/2235ede34c456f1c7d3490f6fe74825d442d272e Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200717132022.4014-1-alexander.deucher@amd.com
2020-07-23Merge tag 'drm-misc-next-2020-07-22' of ↵Dave Airlie1-7/+2
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for v5.9: UAPI Changes: Cross-subsystem Changes: - Convert panel-dsi-cm and ingenic bindings to YAML. - Add lockdep annotations for dma-fence. \o/ - Describe why indefinite fences are a bad idea - Update binding for rocktech jh057n00900. Core Changes: - Add vblank workers. - Use spin_(un)lock_irq instead of the irqsave/restore variants in crtc code. - Add managed vram helpers. - Convert more logging to drm functions. - Replace more http links with https in core and drivers. - Cleanup to ttm iomem functions and implementation. - Remove TTM CMA memtype as it doesn't work correctly. - Remove TTM_MEMTYPE_FLAG_MAPPABLE for many drivers that have no unmappable memory resources. Driver Changes: - Add CRC support to nouveau, using the new vblank workers. - Dithering and atomic state fix for nouveau. - Fixes for Frida FRD350H54004 panel. - Add support for OSD mode (sprite planes), IPU (scaling) and multiple panels/bridges to ingenic. - Use managed vram helpers in ast. - Assorted small fixes to ingenic, i810, mxsfb. - Remove optional unused ttm dummy functions. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/d6bf269e-ccb2-8a7b-fdae-226e9e3f8274@linux.intel.com
2020-07-23drm/amdgpu/dc: Simplify drm_crtc_state::active checksMichel Dänzer1-13/+3
drm_atomic_crtc_check enforces that ::active can only be true if ::enable is as well. Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Michel Dänzer <mdaenzer@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-23drm/amd/powerplay: remove the dpm checking in the boot sequenceKenneth Feng1-1/+1
It's not necessary to retrieve the power features status when the asic is booted up the first time. This patch can have the features enablement status still checked in suspend/resume case and removed from the first boot up sequence. Signed-off-by: Kenneth Feng <kenneth.feng@amd.com> Reviewed-by: Kevin Wang <kevin1.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-23drm/amd/amdgpu: Fix compiler warning in df driverTom St Denis1-1/+1
Fix this warning: CC [M] drivers/gpu/drm/amd/amdgpu/gfxhub_v1_1.o In file included from drivers/gpu/drm/amd/amdgpu/amdgpu_ring.h:29, from drivers/gpu/drm/amd/amdgpu/amdgpu_ctx.h:26, from drivers/gpu/drm/amd/amdgpu/amdgpu.h:43, from drivers/gpu/drm/amd/amdgpu/df_v3_6.c:23: drivers/gpu/drm/amd/amdgpu/df_v3_6.c: In function ‘df_v3_6_pmc_get_count’: ./include/drm/drm_print.h:487:2: warning: ‘hi_base_addr’ may be used uninitialized in this function [-Wmaybe-uninitialized] 487 | __drm_dbg(DRM_UT_DRIVER, fmt, ##__VA_ARGS__) | ^~~~~~~~~ drivers/gpu/drm/amd/amdgpu/df_v3_6.c:649:25: note: ‘hi_base_addr’ was declared here 649 | uint32_t lo_base_addr, hi_base_addr, lo_val = 0, hi_val = 0; | ^~~~~~~~~~~~ In file included from drivers/gpu/drm/amd/amdgpu/amdgpu_ring.h:29, from drivers/gpu/drm/amd/amdgpu/amdgpu_ctx.h:26, from drivers/gpu/drm/amd/amdgpu/amdgpu.h:43, from drivers/gpu/drm/amd/amdgpu/df_v3_6.c:23: ./include/drm/drm_print.h:487:2: warning: ‘lo_base_addr’ may be used uninitialized in this function [-Wmaybe-uninitialized] 487 | __drm_dbg(DRM_UT_DRIVER, fmt, ##__VA_ARGS__) | ^~~~~~~~~ drivers/gpu/drm/amd/amdgpu/df_v3_6.c:649:11: note: ‘lo_base_addr’ was declared here 649 | uint32_t lo_base_addr, hi_base_addr, lo_val = 0, hi_val = 0; Signed-off-by: Tom St Denis <tom.stdenis@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-23drm/amdgpu: won't include gc and mmhub register headers in GMC blockHuang Rui1-2/+0
All gc/mmhub register access and operation should be in gfxhub/mmhub level. Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-23drm/amdgpu: move get_invalidate_req function into gfxhub/mmhub levelHuang Rui5-23/+67
This patch is to move get_invalidate_req into gfxhub/mmhub level. It will avoid mismatch of the different gfxhub/mmhub register offsets and fields in the same gmc block. Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-23drm/amdgpu: add vmhub funcs helper (v2)Huang Rui5-23/+108
This patch is to introduce vmhub funcs helper to add following callback (print_l2_protection_fault_status). Each GC/MMHUB register specific programming should be in gfxhub/mmhub level. v2: remove the condition of funcs assignment. Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-23drm/amdgpu: abstract set_vm_fault_masks function to refine the programmingHuang Rui3-49/+28
This patch is to add set_vm_fault_masks helper to amdgpu_gmc to refine the original programming. Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-23drm/amdgpu: add member to store vm fault interrupt masksHuang Rui4-0/+26
This patch adds a member in vmhub structure to store the vm fault interrupt masks for different version gfxhubs/mmhubs. Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-23Revert "drm/amd/powerplay: drop unnecessary message support check"Changfeng2-1/+10
The below 3 messages are not supported on Renoir SMU_MSG_PrepareMp1ForShutdown SMU_MSG_PrepareMp1ForUnload SMU_MSG_PrepareMp1ForReset It needs to revert patch: drm/amd/powerplay: drop unnecessary message support check to avoid set mp1 state fail during gpu reset on renoir. Signed-off-by: changfeng <Changfeng.Zhu@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-23drm/amdgpu: add printing after executing page reservation to eepromGuchun Chen1-1/+4
This will tell users if the faulty page has been written to external eeprom device in dmesg log. Signed-off-by: Guchun Chen <guchun.chen@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-23drm/amdgpu: expand sienna chichlid reg access supportJohn Clements1-0/+45
Added dedicated 64bit reg read/write support Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: John Clements <john.clements@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-22drm/amdgpu: stop using TTM_MEMTYPE_FLAG_MAPPABLEChristian König1-7/+4
The driver does support some not-mapable resources, but those are already handled correctly in the switch/case statement in the code. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/378243/
2020-07-22Revert "drm/amd/display: Expose connector VRR range via debugfs"Bhanuprakash Modem1-20/+0
v3: * Rebase (Manasi) v2: * Rebase (Manasi) As both VRR min and max are already part of drm_display_info, drm can expose this VRR range for each connector. Hence this logic should move to core DRM. This reverts commit 727962f030c23422a01e8b22d0f463815fb15ec4. Signed-off-by: Bhanuprakash Modem <bhanuprakash.modem@intel.com> Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: AMD gfx <amd-gfx@lists.freedesktop.org> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-21drm/amdgpu: Fix NULL dereference in dpm sysfs handlersPaweł Gronowski1-6/+3
NULL dereference occurs when string that is not ended with space or newline is written to some dpm sysfs interface (for example pp_dpm_sclk). This happens because strsep replaces the tmp with NULL if the delimiter is not present in string, which is then dereferenced by tmp[0]. Reproduction example: sudo sh -c 'echo -n 1 > /sys/class/drm/card0/device/pp_dpm_sclk' Signed-off-by: Paweł Gronowski <me@woland.xyz> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2020-07-21drm/amd/powerplay: fix a crash when overclocking Vega MQiu Wenbo1-4/+6
Avoid kernel crash when vddci_control is SMU7_VOLTAGE_CONTROL_NONE and vddci_voltage_table is empty. It has been tested on Intel Hades Canyon (i7-8809G). Bug: https://bugzilla.kernel.org/show_bug.cgi?id=208489 Fixes: ac7822b0026f ("drm/amd/powerplay: add smumgr support for VEGAM (v2)") Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Qiu Wenbo <qiuwenbo@phytium.com.cn> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-01 23:33:51 +0300