summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd
AgeCommit message (Collapse)AuthorFilesLines
2018-08-01drm/amdgpu: fix a reversed conditionRex Zhu1-1/+1
This test was reversed so it would end up leading to vddnb value can't be read via hwmon on APU. Reviewed-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2018-08-01drm/amd/pp: Convert voltage unit in mV*4 to mV on CZ/STRex Zhu1-2/+3
the voltage showed in debugfs and hwmon should be in mV Reviewed-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2018-08-01drm/amd/pp: Delete unused temp variablesRex Zhu1-16/+6
Only delete the dead temp variables in Polaris. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-08-01drm/amd/pp/Polaris12: Fix a chunk of registers missed to programRex Zhu1-0/+43
DIDTConfig_Polaris12[] table missed a big chunk of data. Pointed by aidan.fabius <aidan.fabius@coreavi.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2018-07-30BackMerge v4.18-rc7 into drm-nextDave Airlie8-16/+49
rmk requested this for armada and I think we've had a few conflicts build up. Signed-off-by: Dave Airlie <airlied@redhat.com>
2018-07-27drm/amdgpu: clean up the superfluous space and align the comment text for ↵Huang Rui1-56/+51
amdgpu_ttm This patch cleans up spaces and align the text to refine the comment for amdgpu_ttm. Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-27drm/amdgpu: correct evict flag for bo moveJunwei Zhang1-2/+2
pass the evict flag instead of hard code Signed-off-by: Junwei Zhang <Jerry.Zhang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-27drm/amdgpu: implement harvesting support for UVD 7.2 (v3)Alex Deucher5-12/+89
Properly handle cases where one or more instance of the IP block may be harvested. v2: make sure ip_num_rings is initialized amdgpu_queue_mgr.c v3: rebase on Christian's UVD changes, drop unused var Reviewed-by: James Zhu <James.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-27drm/amd: Add missing fields in atom_integrated_system_info_v1_11Harry Wentland1-4/+11
This structure needs to align with structure in atomfirmware table. Update it. Signed-off-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-27drm/amd/display: DC 3.1.59Harry Wentland1-1/+1
Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-27drm/amd/display: Prevent PSR from being enabled if initialization failsAnthony Koo2-16/+24
[Why] PSR_SET command is sent to the microcontroller in order to initialize parameters needed for PSR feature, such as telling the microcontroller which pipe is driving the PSR supported panel. When this command is skipped or fails, the microcontroller may program the wrong thing if driver tries to enable PSR. [How] If PSR_SET fails, do not set psr_enable flag to indicate the feature is not yet initialized. Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-27drm/amd/display: Fix Vega10 black screen after mode changeJerry (Fangzhi) Zuo3-1/+16
[Why] The sequence is slightly changed when bring .set_bandwidth out from the end of programming backend to the end of programming surface. Vega10 doesn't like to get clocks updated if stream_count is zero in the current context (Atomic Reset). [How] Do not update clocks if no stream is showing up in the context. Fixes 1b2b130192 "dc: Remove 300Mhz minimum disp clk limit." Signed-off-by: Jerry (Fangzhi) Zuo <Jerry.Zuo@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-27drm/amd/display: flatten aux_engine and engineBhawanpreet Lakha12-186/+140
[Why] engine and aux_engine are unnecessary layers we want to remove this layer. [How] flatten engine and aux engine structs into one struct called aux_engine and remove all references to the engine struct. Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-27drm/amd/display: Retry link training againBhawanpreet Lakha3-4/+24
[Why] Some receivers seem to fail the first link training but are good on subsequent tries. We want to retry link training again. This fixes HTC vive pro not lighting up after being disabled. [How] Check if the link training passed without fall back if this is not the case then we retry link training. Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-27drm/amdgpu: patch the IBs for the second UVD instance v2Christian König1-0/+29
Patch the IBs for the second UVD instance so that userspace don't need to care about the instance they submit to. v2: use direct IB patching Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-and-tested-by: James Zhu <James.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-27drm/amdgpu: add support for inplace IB patching for MM engines v2Christian König3-7/+17
We are going to need that for the second UVD instance on Vega20. v2: rename to patch_cs_in_place Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-and-tested-by: James Zhu <James.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-25gpu: drm: amdgpu: Replace mdelay with msleep in cik_pcie_gen3_enable()Jia-Ju Bai1-1/+1
cik_pcie_gen3_enable() is only called by cik_common_hw_init(), which is never called in atomic context. cik_pcie_gen3_enable() calls mdelay() to busily wait, which is not necessary. mdelay() can be replaced with msleep(). This is found by a static analysis tool named DCNS written by myself. Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-25drm/amdgpu/gmc9: clarify GPUVM fault error messageAlex Deucher1-1/+1
The address printed is the actual address, not the page. Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-25drm/scheduler: remove sched field from the entityNayan Deshmukh3-6/+6
The scheduler of the entity is decided by the run queue on which it is queued. This patch avoids us the effort required to maintain a sync between rq and sched field when we start shifting entites among different rqs. Signed-off-by: Nayan Deshmukh <nayan26deshmukh@gmail.com> Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-25drm/scheduler: modify API to avoid redundancyNayan Deshmukh7-17/+12
entity has a scheduler field and we don't need the sched argument in any of the functions where entity is provided. Signed-off-by: Nayan Deshmukh <nayan26deshmukh@gmail.com> Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-25drm/amdgpu: reduce the number of placements for a BOChristian König2-1/+4
Make struct amdgpu_bo a bit smaller. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-25drm/amdgpu: consistenly name amdgpu_bo_ functionsChristian König10-38/+39
Just rename functions, no functional change. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-25drm/amdgpu: expose only the first UVD instance for nowChristian König2-15/+7
Going to completely rework the context to ring mapping with Nayan's GSoC work, but for now just stopping to expose the second UVD instance should do it. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-25drm/amdgpu: clean up coding style a bitChristian König1-10/+10
No need to bitcast a boolean and even if we should use "!!" instead. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-24drm/amd/display: DC 3.1.58Harry Wentland1-1/+1
Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-24drm/amd/display: separate dc_debug into dc_debug_options and dc_debug dataJun Lei6-15/+18
[why] confusing as to which part of debug is informational, and which part causes behavioral change Signed-off-by: Jun Lei <Jun.Lei@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-24drm/amd/display: Decouple aux from i2cBhawanpreet Lakha14-14/+1549
[Why] Aux engine is created from i2caux layer. We want to remove this layer and use the engine directly. [How] Decouple aux engine from i2caux. Move aux engine related code to dce folder and use dc resource pool to manage the engine. And use the engine functions directly Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-24drm/amd/display: DPP CM ICSC AYCRCB8888 format supportvikrant mhaske2-1/+5
[why] Diags has POR to run the video workload using AYCRCB8888 through DCN; capture it through DWB and send it to VCN hardware to encode [how] added the code to support this format so that DPP ICSC will be able to convert it from YUV444 to internal RGB and DWB OCSC will be able to convert from internal RGB to YUV420 Signed-off-by: vikrant mhaske <vikrant.mhaske@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-24drm/amd/display: On dce100, set clocks to 0 on suspendDavid Francis1-3/+16
[Why] When a dce100 asic was suspended, the clocks were not set to 0. Upon resume, the new clock was compared to the existing clock, they were found to be the same, and so the clock was not set. This resulted in a pernicious blackscreen. [How] In atomic commit, check to see if there are any active pipes. If no, set clocks to 0 Signed-off-by: David Francis <David.Francis@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-24drm/amd/display: allow diags to skip initial link trainingTony Cheng4-3/+9
[why] diag specify what the full config and is only concerned about pass/fail at the end having inter-op code like verifiying we can actually train at reported link rate slows down diag test and add complexity we don't need [how] add dc_debug option to skip capability link trianing also remove hbr in function name as verify is not specific to hbr Signed-off-by: Tony Cheng <tony.cheng@amd.com> Reviewed-by: Ken Chalmers <ken.chalmers@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-24drm/amd/display: Remove unnecessary warningMikita Lipski1-4/+0
[why] The warning message floods the dmesg log on Tonga even though it is expected to have a pix_clk set to zero, when the pipe is not active. [how] remove the assert Signed-off-by: Mikita Lipski <mikita.lipski@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-24drm/amdgpu: move the amdgpu_fbdev_set_suspend() further upShirish S1-3/+3
This patch moves amdgpu_fbdev_set_suspend() to the beginning of suspend sequence. This is to ensure fbcon does not to write to the VRAM after GPU is powerd down. Signed-off-by: Shirish S <shirish.s@amd.com> Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-24drm/amdgpu: Don't warn on destroying a pinned BOMichel Dänzer1-1/+1
The warning turned out to be not so useful, as BO destruction tends to be deferred to a workqueue. Also, we should be preventing any damage from this now, so not really important anymore to fix code doing this. Acked-by: Alex Deucher <alexander.deucher@amd.com> Tested-by: Mike Lothian <mike@fireburn.co.uk> Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-24drm/amd/powerplay: allow slow switch only if NBPState enabled v2Evan Quan2-2/+4
Otherwise there may be potential SMU performance issues. v2: fix commit description and coding style Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Rex Zhu <rex.zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-24drm/amd/powerplay: correct the argument for PPSMC_MSG_SetUclkFastSwitchEvan Quan2-2/+2
The argument was set wrongly. Fast/slow switch was asked when there is actually a slow/fast switch needed. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Rex Zhu <rex.zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-24drm/amd/powerplay: slow UCLK switch when multiple displays not in syncEvan Quan1-1/+2
Slow switch for UCLK when there is multiple displays and they are not in sync. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Rex Zhu <rex.zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-24drm/amdgpu: Fix RLC safe mode test in gfx_v9_0_enter_rlc_safe_modeMichel Dänzer1-1/+1
We were testing the register offset, instead of the value stored in the register, therefore always timing out the loop. This reduces suspend time of the system in the bug report below by ~600 ms. Cc: stable@vger.kernel.org Bugzilla: https://bugs.freedesktop.org/107277 Tested-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com> Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-20drm/amdgpu: rework suspend and resume to deal with atomic changesAlex Deucher1-41/+45
Use the newly split ip suspend functions to do suspend displays first (to deal with atomic so that FBs can be unpinned before attempting to evict vram), then evict vram, then suspend the other IPs. Also move the non-DC pinning code to only be called in the non-DC cases since atomic should take care of DC. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107065 Fixes: e00fb85 drm: Stop updating plane->crtc/fb/old_fb on atomic drivers Acked-by: Harry Wentland <harry.wentland@amd.com> Reviewed-and-tested-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-20drm/amdgpu: split ip suspend into 2 phasesAlex Deucher1-2/+76
We need to do some IPs earlier to deal with ordering issues similar to how resume is split into two phases. Do DCE first to deal with atomic, then do the rest. Acked-by: Harry Wentland <harry.wentland@amd.com> Reviewed-and-tested-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-20drm/amdgpu/acpi: skip backlight events for DCAlex Deucher1-1/+3
No change in behavior, just bail sooner. Reviewed-by: Jim Qu <Jim.Qu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-20drm/amdgpu/apci: don't call sbios request function if it's not supportedAlex Deucher1-25/+28
Check the supported functions mask before calling the bios requests method. Reviewed-by: Jim Qu <Jim.Qu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-20drm/amdgpu: Fix warning in dma_fence_is_later on resume from S3.Andrey Grodzovsky1-0/+2
Problem: amdgpu_ttm_set_buffer_funcs_status destroys adev->mman.entity on suspend without releasing adev->mman.bdev.man[TTM_PL_VRAM].move fence so on resume the new drm_sched_entity.fence_context causes the warning against the old fence context which is different. Fix: When destroying sched_entity in amdgpu_ttm_set_buffer_funcs_status release man->move and set the pointer to NULL. Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-20drm/amdgpu: use drm_fb helper for console_(un)lockShirish S2-8/+4
This patch removes the usage of console_(un)lock by replacing drm_fb_helper_set_suspend() to drm_fb_helper_set_suspend_unlocked() which locks and unlocks the console instead of locking ourselves. Signed-off-by: Shirish S <shirish.s@amd.com> Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-20drm/amd/display: Convert 10kHz clks from PPLib into kHzRex Zhu1-2/+2
Except special naming as *_in_khz, The default clock unit in powerplay is in 10KHz. so need to * 10 as expecting clock frequency in display is in kHz. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-20drm/amd/pp: Set Max clock level to display by defaultRex Zhu1-2/+7
avoid the error in dmesg: [drm:dm_pp_get_static_clocks] *ERROR* DM_PPLIB: invalid powerlevel state: 0! Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-20drm/amd/pp: Update clk with od setting when set power stateRex Zhu1-0/+15
This can fix the issue resume from S3, the user's OD setting were reverted to default. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-20drm/amd/pp: Read vbios vddc limit before use themRex Zhu1-3/+8
Use the vddc limit before read them from vbios Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-20drm/amdgpu: lock and unlock console only for amdgpu_fbdev_set_suspend [V5]Shirish S1-15/+7
[Why] While the console_lock is held, console output will be buffered, till its unlocked it wont be emitted, hence its ideal to unlock sooner to enable debugging/detecting/fixing of any issue in the remaining sequence of events in resume path. The concern here is about consoles other than fbcon on the device, e.g. a serial console [How] This patch restructures the console_lock, console_unlock around amdgpu_fbdev_set_suspend() and moves this new block appropriately. V2: Kept amdgpu_fbdev_set_suspend after pci_set_power_state V3: Updated the commit message to clarify the real concern that this patch addresses. V4: code clean-up. V5: fixed return value Signed-off-by: Shirish S <shirish.s@amd.com> Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-20drm/amd/display: Honor pplib stutter mask for all ASICs in DCHarry Wentland1-4/+3
[Why] We were only setting this mask for DCN, but should really use it universally for all ASICs. [How] Move the assignment out of the Raven switch statement for all ASICs other than Stoney and Carrizo. v2: Keep stutter always on for Carrizo and Stoney (Alex) Cc: Rex.Zhu@amd.com Cc: Feifei.Xu@amd.com Cc: Kenneth.Feng@amd.com Cc: Evan.Quan@amd.com Cc: Bhawanpreet.Lakha@amd.com Cc: Jordan.Lazare@amd.com Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-20drm/amd/display: Drop unused backlight functions in DMHarry Wentland1-16/+2
These are only ever called for non-DC code. Signed-off-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-29 01:36:12 +0300