summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd/pm/swsmu/smu_internal.h
AgeCommit message (Collapse)AuthorFilesLines
2023-12-13drm/amd/pm: setup the framework to support Wifi RFI mitigation featureEvan Quan1-0/+3
With WBRF feature supported, as a driver responding to the frequencies, amdgpu driver is able to do shadow pstate switching to mitigate possible interference(between its (G-)DDR memory clocks and local radio module frequency bands used by Wifi 6/6e/7). -- v1->v2: - update the prompt for feature support(Lijo) v8->v9: - update parameter document for smu_wbrf_event_handler(Simon) v9->v10: v10->v11: - correct the logics for wbrf range sorting(Lijo) v13: - Fix the format issue (IIpo Jarvinen) Signed-off-by: Evan Quan <quanliangl@hotmail.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Ma Jun <Jun.Ma2@amd.com> Signed-off-by: Ma Jun <Jun.Ma2@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-11-30drm/amdgpu: optimize RLC powerdown notification on VangoghPerry Yuan1-0/+1
The smu needs to get the rlc power down message to sync the rlc state with smu, the rlc state updating message need to be sent at while smu begin suspend sequence , otherwise SMU will crash while RLC state is not notified by driver, and rlc state probally changed after that notification, so it needs to notify rlc state to smu at the end of the suspend sequence in amdgpu_device_suspend() that can make sure the rlc state is correctly set to SMU. [ 101.000590] amdgpu 0000:03:00.0: amdgpu: SMU: I'm not done with your previous command: SMN_C2PMSG_66:0x0000001E SMN_C2PMSG_82:0x00000000 [ 101.000598] amdgpu 0000:03:00.0: amdgpu: Failed to disable gfxoff! [ 110.838026] amdgpu 0000:03:00.0: amdgpu: SMU: I'm not done with your previous command: SMN_C2PMSG_66:0x0000001E SMN_C2PMSG_82:0x00000000 [ 110.838035] amdgpu 0000:03:00.0: amdgpu: Failed to disable smu features. [ 110.838039] amdgpu 0000:03:00.0: amdgpu: Fail to disable dpm features! [ 110.838040] [drm:amdgpu_device_ip_suspend_phase2 [amdgpu]] *ERROR* suspend of IP block <smu> failed -62 [ 110.884394] PM: suspend of devices aborted after 21213.620 msecs [ 110.884402] PM: start suspend of devices aborted after 21213.882 msecs [ 110.884405] PM: Some devices failed to suspend, or early wake event detected Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com> Signed-off-by: Perry Yuan <perry.yuan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-10-20drm/amd/pm: Support for getting power1_cap_min valueMa Jun1-1/+1
Support for getting power1_cap_min value on smu13 and smu11. For other Asics, we still use 0 as the default value. Signed-off-by: Ma Jun <Jun.Ma2@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-09drm/amd: Clean up errors in smu_v13_0_5_ppt.cRan Sun1-2/+2
Fix the following errors reported by checkpatch: ERROR: space prohibited before that ',' (ctx:WxW) Signed-off-by: Ran Sun <sunran001@208suo.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-17drm/amd: Add detailed GFXOFF stats to debugfsAndré Almeida1-0/+3
Add debugfs interface to log GFXOFF statistics: - Read amdgpu_gfxoff_count to get the total GFXOFF entry count at the time of query since system power-up - Write 1 to amdgpu_gfxoff_residency to start logging, and 0 to stop. Read it to get average GFXOFF residency % multiplied by 100 during the last logging interval. Both features are designed to be keep the values persistent between suspends. Signed-off-by: André Almeida <andrealmeid@igalia.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-05-04drm/amdgpu: enable pptable ucode loadingEvan Quan1-0/+1
With SCPM enabled, pptable cannot be uploaded to SMU directly. The transferring has to be via PSP. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-17drm/amd/pm: correct the default DriverSmuConfig table settingsEvan Quan1-0/+2
For Some ASICs, with the PMFW default settings, we may see the power consumption reported via metrics table is "Very Erratic". With the socket power alpha filter set as 10/100ms, we can correct that issue. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-12drm/amd/pm: fix enabled features retrieving on Renoir and Cyan SkillfishEvan Quan1-1/+1
For Cyan Skillfish and Renoir, there is no interface provided by PMFW to retrieve the enabled features. So, we assume all features are enabled. Fixes: 7ade3ca9cdb5 ("drm/amd/pm: correct the usage for 'supported' member of smu_feature structure") Signed-off-by: Evan Quan <evan.quan@amd.com> Tested-by: Nathan Chancellor <nathan@kernel.org> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-08drm/amd/pm: revise the implementation of ↵Evan Quan1-1/+1
smu_cmn_disable_all_features_with_exception As there is no internal cache for enabled ppfeatures now. Thus the 2nd parameter will be not needed any more. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-08drm/amd/pm: update the data type for retrieving enabled ppfeaturesEvan Quan1-1/+1
Use uint64_t instead of an array of uint32_t. This can avoid some non-necessary intermediate uint32_t -> uint64_t conversions. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-01-27drm/amd: Expose the FRU SMU I2C busLuben Tuikov1-2/+2
Expose both SMU I2C buses. Some boards use the same bus for both the RAS and FRU EEPROMs and others use different buses. This enables the additional I2C bus and sets the right buses to use for RAS and FRU EEPROM access. Cc: Roy Sun <Roy.Sun@amd.com> Co-developed-by: Alex Deucher <Alexander.Deucher@amd.com> Signed-off-by: Luben Tuikov <luben.tuikov@amd.com> Reviewed-by: Alex Deucher <Alexander.Deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-06-11drm/amd/pm: correct the power limits reporting on OOB supportedEvan Quan1-1/+1
As OOB(out-of-band) interface may be used to update the power limits. Thus to make sure the power limits reporting of our driver always reflects the correct values, the internal cache must be aligned carefully. V2: add support for out-of-band of other ASICs align cached current power limit with OOB imposed Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-By: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-06-11drm/amd/pm: update the cached dpm feature statusEvan Quan1-1/+1
For some ASICs, the real dpm feature disablement job is handled by PMFW during baco reset and custom pptable loading. Cached dpm feature status need to be updated to pair that. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-11-16drm/amd/pm: add the fine grain tuning function for vangoghXiaojian Du1-0/+1
This patch is to add the fine grain tuning function for vangogh. This function uses the pp_od_clk_voltage sysfs file to configure the min and max value of gfx clock frequency or restore the default value. Command guide: echo "s level value" > pp_od_clk_voltage "s" - set the sclk frequency "level" - 0 or 1, "0" represents the min value, "1" represents the max value "value" - the target value of sclk frequency, it should be limited in the safe range echo "r" > pp_od_clk_voltage "r" - reset the sclk frequency, restore the default value instantly echo "c" > pp_od_clk_voltage "c" - commit the min and max value of sclk frequency to the system only after the commit command, the setting target values by "s" command will take effect. Example: 1)check the default sclk frequency $ cat pp_od_clk_voltage OD_SCLK: 0: 200Mhz 1: 1400Mhz OD_RANGE: SCLK: 200MHz 1400MHz 2)use "s" -- set command to configure the min or max sclk frequency $ echo "s 0 600" > pp_od_clk_voltage $ echo "s 1 1000" > pp_od_clk_voltage $ echo "c" > pp_od_clk_voltage $ cat pp_od_clk_voltage OD_SCLK: 0: 600Mhz 1: 1000Mhz OD_RANGE: SCLK: 200MHz 1400MHz 3)use "r" -- reset command to restore the min and max sclk frequency $ echo "r" > pp_od_clk_voltage $ cat pp_od_clk_voltage OD_SCLK: 0: 200Mhz 1: 1400Mhz OD_RANGE: SCLK: 200MHz 1400MHz Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-10-15drm/amd/pm: properly setting GPO feature on UMD pstate entering/exitingEvan Quan1-0/+1
Disable/enable the GPO feature on UMD pstate entering/exiting. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-10-09drm/amdgpu/swsmu: clean up a bunch of stale interfacesAlex Deucher1-7/+0
These were leftover from the initial implementation, but never used. Drop them. Reviewed-by: Evan Quan <evan.quan@amd.com> Noticed-by: Ryan Taylor <ryan.taylor@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-09-18drm/amd/pm: drop unnecessary table existence and dpm enablement checkEvan Quan1-0/+1
Either this was already performed in parent API. Or the table is confirmed to exist. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Nirmoy Das <nirmoy.das@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-09-18drm/amd/pm: put Navi1X umc cdr workaround in post_smu_initEvan Quan1-1/+0
That's where the uclk dpm get enabled and then the uclk cdr workaround can be applied. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-09-18drm/amd/pm: wrapper for postponing some setup job after DAL initializatioa(V2)Evan Quan1-0/+1
So that ASIC specific actions can be added. V2: better namings Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-09-03drm/amdgpu/swsmu: add new callback for getting fan parametersAlex Deucher1-0/+1
To fetch the max rpm from pptable. Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-19drm/amd/pm: disable/enable deep sleep features on UMD pstate enter/exitEvan Quan1-0/+1
Add deep sleep disablement/enablement on UMD pstate entering/exiting. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-19drm/amd/pm: disable/enable gfx ulv on UMD pstate enter/exitEvan Quan1-0/+1
Add gfx ulv disablement/enablement on UMD pstate entering/exiting. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-14drm/amd/pm: optimize the power related source code layoutEvan Quan1-0/+97
The target is to provide a clear entry point(for power routines). Also this can help to maintain a clear view about the frameworks used on different ASICs. Hopefully all these can make power part more friendly to play with. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-10-21 21:52:42 +0300