summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd/display
AgeCommit message (Collapse)AuthorFilesLines
2021-11-03drm/amd/display: dsc engine not disabled after unplug dsc mst hubHersen Wu2-43/+138
[WHY] If timing and bpp of displays on mst hub are not changed, pbn, slot_num for displays should not be changed. Linux user mode may initiate atomic_check with different display configuration after set mode finished. This will call to amdgpu_dm to re-compute payload, slot_num of displays and saved to dm_connect_state. stream->timing.flags.dsc, pbn, slot_num are updated to values which may be different from that were used for set mode. when dsc hub with 3 4k@60hz dp connected, 3 dsc engines are enabled. timing.flags.dsc = 1. timing.flags.dsc are changed to 0 due to atomic check. when dsc hub is unplugged, amdgpu driver check timing.flags.dsc for last mode set and find out flags.dsc = 0, then does not disable dsc. [HOW] check status of displays on dsc mst hubs. re-compute pbn, slot_num, timing.flags.dsc only if there is mode, connect or enable/disable change. Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Hersen Wu <hersenwu@amd.com> Reviewed-by: Mikita Lipski <Mikita.Lipski@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-11-03drm/amd/display: Look at firmware version to determine using dmub on dcn21Mario Limonciello1-1/+9
commit 652de07addd2 ("drm/amd/display: Fully switch to dmub for all dcn21 asics") switched over to using dmub on Renoir to fix Gitlab 1735, but this implied a new dependency on newer firmware which might not be met on older kernel versions. Since sw_init runs before hw_init, there is an opportunity to determine whether or not the firmware version is new to adjust the behavior. Cc: Roman.Li@amd.com BugLink: https://gitlab.freedesktop.org/drm/amd/-/issues/1772 BugLink: https://gitlab.freedesktop.org/drm/amd/-/issues/1735 Fixes: 652de07addd2 ("drm/amd/display: Fully switch to dmub for all dcn21 asics") Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Roman Li <Roman.Li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-11-02amdgpu: use drm_kms_helper_connector_hotplug_eventSimon Ser2-6/+6
When updating a single connector, use drm_kms_helper_connector_hotplug_event instead of drm_kms_helper_hotplug_event. Signed-off-by: Simon Ser <contact@emersion.fr> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211018084707.32253-5-contact@emersion.fr
2021-10-28drm/amd/display: MST support for DPIAMeenakshikumar Somasundaram4-0/+111
[Why] - DPIA MST slot registers are not programmed during payload allocation and hence MST does not work with DPIA. - HPD RX interrupts are not handled for DPIA. [How] - Added inbox command to program the MST slots whenever payload allocation happens for DPIA links. - Added support for handling HPD RX interrupts Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amdgpu: Fix even more out of bound writes from debugfsPatrik Jakobsson1-9/+9
CVE-2021-42327 was fixed by: commit f23750b5b3d98653b31d4469592935ef6364ad67 Author: Thelford Williams <tdwilliamsiv@gmail.com> Date: Wed Oct 13 16:04:13 2021 -0400 drm/amdgpu: fix out of bounds write but amdgpu_dm_debugfs.c contains more of the same issue so fix the remaining ones. v2: * Add missing fix in dp_max_bpc_write (Harry Wentland) Fixes: 918698d5c2b5 ("drm/amd/display: Return the number of bytes parsed than allocated") Signed-off-by: Patrik Jakobsson <pjakobsson@suse.de> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: Enable dpia in dmub only for DCN31 B0Jude Shih3-0/+16
[Why] DMUB binary is common for both A0 and B0. Hence, driver should notify FW about the support for DPIA in B0. [How] Added dpia_supported bit in dmub_fw_boot_options and will be set only for B0. Assign dpia_supported to true before dm_dmub_hw_init in B0 case. v2: fix build without CONFIG_DRM_AMD_DC_DCN (Alex) Signed-off-by: Jude Shih <shenshih@amd.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: Fix USB4 hot plug crash issueJude Shih1-7/+16
[Why] Notify data from outbox corrupt, the notify type should be 2 (HPD) instead of 0 (No data). We copied the address instead of the value. The memory might be freed in the end of outbox IRQ [How] We should allocate the memory of notify and copy the whole content from outbox to hpd handle function Fixes: 88f52b1fff891e ("drm/amd/display: Support for SET_CONFIG processing with DMUB") Signed-off-by: Jude Shih <shenshih@amd.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: Fix deadlock when falling back to v2 from v3Nicholas Kazlauskas1-4/+2
[Why] A deadlock in the kernel occurs when we fallback from the V3 to V2 add_topology_to_display or remove_topology_to_display because they both try to acquire the dtm_mutex but recursive locking isn't supported on mutex_lock(). [How] Make the mutex_lock/unlock more fine grained and move them up such that they're only required for the psp invocation itself. Fixes: bf62221e9d0e ("drm/amd/display: Add DCN3.1 HDCP support") Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: Fallback to clocks which meet requested voltage on DCN31Michael Strauss1-3/+10
[WHY] On certain configs, SMU clock table voltages don't match which cause parser to behave incorrectly by leaving dcfclk and socclk table entries unpopulated. [HOW] Currently the function that finds the corresponding clock for a given voltage only checks for exact voltage level matches. In the case that no match gets found, parser now falls back to searching for the max clock which meets the requested voltage (i.e. its corresponding voltage is below requested). Signed-off-by: Michael Strauss <michael.strauss@amd.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: move FPU associated DCN301 code to DML folderQingqing Zhuo7-365/+450
[Why & How] As part of the FPU isolation work documented in https://patchwork.freedesktop.org/series/93042/, isolate code that uses FPU in DCN301 to DML, where all FPU code should locate. Cc: Christian König <christian.koenig@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Zhan Liu <Zhan.Liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Qingqing Zhuo <Qingqing.Zhuo@amd.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: fix link training regression for 1 or 2 laneWenjing Liu1-3/+32
[why] We have a regression that cause maximize lane settings to use uninitialized data from unused lanes. This will cause link training to fail for 1 or 2 lanes because the lane adjust is populated incorrectly sometimes. v2: fix build without CONFIG_DRM_AMD_DC_DCN (Alex) Reviewed-by: Eric Yang <eric.yang2@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: add two lane settings training optionsWenjing Liu2-2/+13
[why] option 1: disallow different lanes to have different lane settings option 2: dpcd lane settings will always use the same hw lane settings even if it doesn't match requested lane adjust Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: decouple hw_lane_settings from dpcd_lane_settingsWenjing Liu4-106/+63
[why] As DP features expands, we have encountered many situations where we must configure a different DPCD lane setting from hw lane settings we output. The change is to decouple hw lane settings from dpcd lane settings to provide flexibility to configure dpcd and hw individually. Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: implement decide lane settingsWenjing Liu4-232/+155
[why] Decouple lane settings decision logic all to its own function. The function takes in lane adjust array and link training settings and decide what hw lane setting and dpcd lane setting should be used. Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: adopt DP2.0 LT SCR revision 8Wenjing Liu1-8/+13
[how] revision 8 SCR requires DP Source to write TPS2 and FFE lane adjustment in one 5 byte write aux transaction. It specifies to read aux rd interval value as soon as we turn on TPS1 pattern. Cc: Wayne Lin <wayne.lin@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: FEC configuration for dpia links in MST modeMeenakshikumar Somasundaram1-1/+1
[Why] To fix the check condition for fec enable for dpia links in MST mode. [How] dc_link_should_enable_fec() to be used to check whether fec should be enabled in MST mode. Cc: Wayne Lin <wayne.lin@amd.com> Reviewed-by: Jimmy Kizito <Jimmy.Kizito@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: FEC configuration for dpia linksMeenakshikumar Somasundaram1-1/+1
[Why] To fix the check condition for fec enable for dpia links. [How] dc_link_should_enable_fec() to be used to check whether fec should be enabled. Cc: Wayne Lin <wayne.lin@amd.com> Reviewed-by: Jimmy Kizito <Jimmy.Kizito@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: Add workaround flag for EDID read on certain docksJimmy Kizito2-0/+4
[Why] Certain docks appear to NAK I2C writes to the segment pointer with the MOT (middle of transaction) bit clear. This behaviour can cause EDID reads from higher segments to fail. [How] Add workaround flag for links which connect to docks exhibiting this issue. Cc: Wayne Lin <wayne.lin@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: Set phy_mux_sel bit in dmub scratch registerHansen5-3/+9
[Why] B0 has pipe mux for DIGC and DIGD which can be connected to PHYF/PHYG or PHYC/PHY D. [How] Based on chip internal hardware revision id determine it is B0 and set DMUB scratch register so DMUBFW can connect the display pipe is connected correctly to the dig. Cc: Wayne Lin <wayne.lin@amd.com> Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Hansen <Hansen.Dsouza@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: Manually adjust strobe for DCN303Martin Leung1-0/+14
why: DCN303's 4 channel SOC BB causes problems at strobe how: workaround to manually adjust strobe calculation using FCLK restrict. Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Martin Leung <Martin.Leung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: 3.2.159Aric Cyr1-1/+1
This new DC version brings improvements in the following areas: - Improvements for USB4; - Isolate FPU code for DCN20, DCN301, and DSC; - Fixes on Linking training; - Refactoring some parts of the code, such as PSR; Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: [FW Promotion] Release 0.0.90Anthony Koo1-2/+2
Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: Remove unused macrosAnson Jacob3-8/+0
fixed16_to_double & fixed16_to_double_to_cpu are not used. Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Signed-off-by: Anson Jacob <Anson.Jacob@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: allow windowed mpo + odmDmytro Laktyushkin3-17/+28
This change adds a config flag to allow non fullscreen MPO during ODM. Scaling calculation will still fail configurations where video is only one one side of the screen. Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: set Layout properly for 8ch audio at timing validationGuo, Bing1-2/+4
Why: For audio packet type 0x02, there are 2 Layouts: Layout = 0 for 2 channels and Layout = 1 for > 2 channels. Layout will affect bandwidth check. Currently, for HDMI FRL, Layout field isn't set and has a default value of 0, so theoretically only 2-channel audio for audio packet type 0x02 is supported now. How: 1. Set Layout properly according to maximum audio channel numbers for audios with audio packet type 0x02. 2. 8ch LPCM audio is not supported for timing modes with v_active <= 576. Reviewed-by: Chris Park <chris.park@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Signed-off-by: Bing Guo <Bing.Guo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: Fix 3DLUT skipped programmingAric Cyr2-0/+5
We found a compilation error that we thought was caused by the 3DLUT patch; later on, we figured out the root cause of the problem, but we already applied the revert in the wrong patch. This commit brings it back the 3DLUT fix. Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: 3.2.158Aric Cyr1-1/+1
Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: [FW Promotion] Release 0.0.89Anthony Koo1-3/+6
- Add flag to control root clock gating in init_hw - Add flag to indicate a diags environment is being used Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: Handle I2C-over-AUX write channel status updateAric Cyr4-10/+44
[Why] When writing long AUX commands some sinks will respond will write status update requiring source to read status. [How] When a write request is replied with data (AUX_ACK_M), retry a read of write status to determine when the write is completed. Reviewed-by: Martin Leung <Martin.Leung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: Add comment for preferred_training_settingsGeorge Shen1-0/+4
[Why] Currently the naming of preferred_training_settings is ambiguous and has caused confusion regarding its purpose and usage. [How] Add comment to clarify the intention. Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Signed-off-by: George Shen <george.shen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: Implement fixed DP drive settingsGeorge Shen6-1/+27
[Why] Currently there are use cases that require DP link to maintain fixed VS and PE in HW regardless of what the sink requests. BIOS integrated info table will specify whether we need to use the fixed drive settings, and the drive settings to use. [How] Implement changes to parse the integrated info table and set the fixed drive settings accordingly. Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Signed-off-by: George Shen <george.shen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: restyle dcn31 resource header inline with other asicsDmytro Laktyushkin2-2/+12
Style change for better consistency across codebase Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: clean up dcn31 revision checkDmytro Laktyushkin1-8/+2
This is unnecessary in clk_mgr Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: Defer GAMCOR and DSCL power down sequence to vupdateMichael Strauss6-6/+38
[WHY] Every other CM LUT power down sequence is deferred to next vupdate as memory powerdown updates immediately while selecting LUTs is double buffered. Previous update to defer LUT power down missed GAMCOR and DSCL, causing some visible flicker when entering/exiting fullscreen video playback. [HOW] Update dpp deferred update loop to check for valid DPPs in res_pool instead of referencing dcn_ip which turns out to not be populated during runtime. Move GAMCOR and DSCL powerdown to dpp deferred updates. Reviewed-by: Haonan Wang <Haonan.Wang2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Signed-off-by: Michael Strauss <michael.strauss@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: Set i2c memory to light sleep during hw initMichael Strauss3-2/+9
[WHY] i2c memory doesn't get set to light sleep on hw init as intended [HOW] Set i2c to light sleep after reg gets zeroed, ensuring memory power control doesn't get disabled for any other DIO memory Reviewed-by: Haonan Wang <Haonan.Wang2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Signed-off-by: Michael Strauss <michael.strauss@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: fix a crash on USB4 over C20 PHYAhmad Othman1-5/+20
[Why] Crash when USB4 is connected. [How] Added an ASIC specific code guard. Reviewed-by: Nikola Cornij <Nikola.Cornij@amd.com> Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Signed-off-by: Ahmad Othman <Ahmad.Othman@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: move FPU associated DSC code to DML folderQingqing Zhuo8-338/+389
[Why & How] As part of the FPU isolation work documented in https://patchwork.freedesktop.org/series/93042/, isolate code that uses FPU in DSC to DML, where all FPU code should locate. This change does not refactor any functions but move code around. Cc: Christian König <christian.koenig@amd.com> Cc: Hersen Wu <hersenxs.wu@amd.com> Cc: Anson Jacob <Anson.Jacob@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Tested-by: Anson Jacob <Anson.Jacob@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: Add support for USB4 on C20 PHY for DCN3.1Ahmad Othman4-6/+64
[Why] Created new fields that matches new B0 structs On DCN31 the mapping of DIO output to PHY differs from A0 to B0 boards with new PHY C20 & this new mapping needed to be handled. [How] Mapped new structure based on new structs Added logic for mapping over A0 and B0 boards Hooked all new structs together. Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Ahmad Othman <Ahmad.Othman@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: dc_link_set_psr_allow_active refactoringRobin Chen10-23/+125
[Why] To expose new power optimization flags to PSR interface. It allows the PSR related power features can be enabled separately base on different use scenarios. Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Robin Chen <po-tchen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: Get ceiling for v_total calcGuo, Bing1-3/+12
Updating certain variable blanking calculations to use ceiling function. Reviewed-by: Chris Park <chris.park@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Signed-off-by: Bing Guo <Bing.Guo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: dcn20_resource_construct reduce scope of FPU enabledAnson Jacob1-7/+9
Limit when FPU is enabled to only functions that does FPU operations for dcn20_resource_construct, which gets called during driver initialization. Enabling FPU operation disables preemption. Sleeping functions(mutex (un)lock, memory allocation using GFP_KERNEL, etc.) should not be called when preemption is disabled. Fixes the following case caught by enabling CONFIG_DEBUG_ATOMIC_SLEEP in kernel config [ 1.338434] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:281 [ 1.347395] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 197, name: systemd-udevd [ 1.356356] CPU: 7 PID: 197 Comm: systemd-udevd Not tainted 5.13.0+ #3 [ 1.356358] Hardware name: System manufacturer System Product Name/PRIME X570-PRO, BIOS 3405 02/01/2021 [ 1.356360] Call Trace: [ 1.356361] dump_stack+0x6b/0x86 [ 1.356366] ___might_sleep.cold+0x87/0x98 [ 1.356370] __might_sleep+0x4b/0x80 [ 1.356372] mutex_lock+0x21/0x50 [ 1.356376] smu_get_uclk_dpm_states+0x3f/0x80 [amdgpu] [ 1.356538] pp_nv_get_uclk_dpm_states+0x35/0x50 [amdgpu] [ 1.356711] init_soc_bounding_box+0xf9/0x210 [amdgpu] [ 1.356892] ? create_object+0x20d/0x340 [ 1.356897] ? dcn20_resource_construct+0x46f/0xd30 [amdgpu] [ 1.357077] dcn20_resource_construct+0x4b1/0xd30 [amdgpu] ... Tested on: 5700XT (NAVI10 0x1002:0x731F 0x1DA2:0xE410 0xC1) Cc: Christian König <christian.koenig@amd.com> Cc: Hersen Wu <hersenxs.wu@amd.com> Cc: Anson Jacob <Anson.Jacob@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Signed-off-by: Anson Jacob <Anson.Jacob@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: Align bw context with hw config when system resumeLewis Huang1-0/+6
[Why] When the vbios config and driver config are different, if we update clock to lower before call program_timing and program_pixel_clk, garbage appear. [How] Align bw context with hw config when system resume Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Signed-off-by: Lewis Huang <Lewis.Huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amdgpu/display: add quirk handling for stutter modeAlex Deucher1-0/+33
Stutter mode is a power saving feature on GPUs, however at least one early raven system exhibits stability issues with it. Add a quirk to disable it for that system. Bug: https://bugzilla.kernel.org/show_bug.cgi?id=214417 Fixes: 005440066f929b ("drm/amdgpu: enable gfxoff again on raven series (v2)") Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28BackMerge tag 'v5.15-rc7' into drm-nextDave Airlie2-1/+7
The msm next tree is based on rc3, so let's just backmerge rc7 before pulling it in. Signed-off-by: Dave Airlie <airlied@redhat.com>
2021-10-28drm/amd/display: Fix deadlock when falling back to v2 from v3Nicholas Kazlauskas1-4/+2
[Why] A deadlock in the kernel occurs when we fallback from the V3 to V2 add_topology_to_display or remove_topology_to_display because they both try to acquire the dtm_mutex but recursive locking isn't supported on mutex_lock(). [How] Make the mutex_lock/unlock more fine grained and move them up such that they're only required for the psp invocation itself. Fixes: bf62221e9d0e ("drm/amd/display: Add DCN3.1 HDCP support") Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-10-28drm/amd/display: Fallback to clocks which meet requested voltage on DCN31Michael Strauss1-3/+10
[WHY] On certain configs, SMU clock table voltages don't match which cause parser to behave incorrectly by leaving dcfclk and socclk table entries unpopulated. [HOW] Currently the function that finds the corresponding clock for a given voltage only checks for exact voltage level matches. In the case that no match gets found, parser now falls back to searching for the max clock which meets the requested voltage (i.e. its corresponding voltage is below requested). Signed-off-by: Michael Strauss <michael.strauss@amd.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-10-28drm/amdgpu: Fix even more out of bound writes from debugfsPatrik Jakobsson1-9/+9
CVE-2021-42327 was fixed by: commit f23750b5b3d98653b31d4469592935ef6364ad67 Author: Thelford Williams <tdwilliamsiv@gmail.com> Date: Wed Oct 13 16:04:13 2021 -0400 drm/amdgpu: fix out of bounds write but amdgpu_dm_debugfs.c contains more of the same issue so fix the remaining ones. v2: * Add missing fix in dp_max_bpc_write (Harry Wentland) Fixes: 918698d5c2b5 ("drm/amd/display: Return the number of bytes parsed than allocated") Signed-off-by: Patrik Jakobsson <pjakobsson@suse.de> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-10-28Merge tag 'topic/amdgpu-dp2.0-mst-2021-10-27' of ↵Dave Airlie8-1/+383
git://anongit.freedesktop.org/drm/drm-misc into drm-next UAPI Changes: Nope! Cross-subsystem Changes: drm_dp_update_payload_part1() takes a new argument for specifying what the VCPI slot start is Core Changes: Make the DP MST helpers aware of the current starting VCPI slot/VCPI total slot count... Driver Changes: ...and then add support for taking advantage of this for 128b/132b links on DP 2.0 for amdgpu Signed-off-by: Dave Airlie <airlied@redhat.com> From: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/bf8e724cc0c8803d58a8d730fd6883c991376a76.camel@redhat.com
2021-10-28drm/amdgpu/display: fix build when CONFIG_DRM_AMD_DC_DCN is not setAlex Deucher2-2/+4
Need to guard some things with CONFIG_DRM_AMD_DC_DCN. Fixes: 41724ea273cdda ("drm/amd/display: Add DP 2.0 MST DM Support") Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: Lyude Paul <lyude@redhat.com> Cc: Dave Airlie <airlied@gmail.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211027223914.1776061-1-alexander.deucher@amd.com
2021-10-26drm/amd/display: Add DP 2.0 MST DM SupportBhawanpreet Lakha3-1/+36
[Why] Add DP2 MST and debugfs support [How] Update the slot info based on the link encoding format Reviewed-by: "Lin, Wayne" <Wayne.Lin@amd.com> Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com> Signed-off-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211025223825.301703-5-lyude@redhat.com
generated by cgit v1.2.3 (git 2.39.0) at 2026-06-08 15:56:42 +0300