summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd/display
AgeCommit message (Collapse)AuthorFilesLines
2023-12-19drm/amd/display: Only clear symclk otg flag for HDMIAlvin Lee4-4/+8
[Description] There is a corner case where the symclk otg flag is cleared when disabling the phantom pipe for subvp (because the phantom and main pipe share the same link). This is undesired because we need the maintain the correct symclk otg flag state for the main pipe. For now only clear the flag only for HDMI signal type, since it's only set for HDMI signal type (phantom is virtual). The ideal solution is to not clear it if the stream is phantom but currently there's a bug that doesn't allow us to do this. Once this issue is fixed the proper fix can be implemented. Reviewed-by: Samson Tam <samson.tam@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-12-19drm/amd/display: Fix lightup regression with DP2 single display configsMichael Strauss1-0/+8
[WHY] Previous fix for multiple displays downstream of DP2 MST hub caused regression [HOW] Match sink IDs instead of sink struct addresses Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Charlene Liu <charlene.liu@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Michael Strauss <michael.strauss@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-12-19drm/amd/display: Deep copy dml2_context when copying dc_stateDillon Varone1-0/+4
[WHY&HOW] dml2_context should be deep copied from src to dst dc_state. Reviewed-by: George Shen <george.shen@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Dillon Varone <dillon.varone@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-12-19drm/amd/display: Create dc_state after resource initializationDillon Varone1-9/+9
[WHY&HOW] After refactoring dc_state, it is always constructed at the time of its creation. Construction can only happen after dc resources are initialized, so move creation to be after this. Reviewed-by: George Shen <george.shen@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Dillon Varone <dillon.varone@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-12-19drm/amd/display: Fix null reference to state when getting subvp typeDillon Varone1-1/+1
[WHY&HOW] Need to provide valid pointer to dc_state when getting subvp pipe type. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Dillon Varone <dillon.varone@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-12-19drm/amd/display: Refactor phantom resource allocationDillon Varone33-549/+578
[WHY?] Phantom streams and planes were previously not referenced explcitly on creation. [HOW?] To reduce memory management complexity, add an additional phantom streams and planes reference into dc_state, and move mall_stream_config to stream_status inside the state to make it safe to modify in shallow copies. Also consildates any logic that is affected by this change to dc_state. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Jun Lei <jun.lei@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Dillon Varone <dillon.varone@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-12-19drm/amd/display: Refactor dc_state interfaceDillon Varone37-706/+1171
[WHY?] Part of the dc_state interface that deals with adding streams and planes should remain public, while others that deal with internal status' and subvp should be private to DC. [HOW?] Move and rename the public functions to dc_state.h and private functions to dc_state_priv.h. Also add some additional functions for extracting subvp meta data from the state. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Jun Lei <jun.lei@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Dillon Varone <dillon.varone@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-12-19drm/amd/display: Wake DMCUB before executing GPINT commandsNicholas Kazlauskas4-54/+77
[Why] DMCUB can be in idle when we attempt to interface with the HW through the GPINT mailbox resulting in a system hang. [How] Add dc_wake_and_execute_gpint() to wrap the wake, execute, sleep sequence. If the GPINT executes successfully then DMCUB will be put back into sleep after the optional response is returned. It functions similar to the inbox command interface. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Hansen Dsouza <hansen.dsouza@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-12-19drm/amd/display: Wake DMCUB before sending a commandNicholas Kazlauskas25-63/+143
[Why] We can hang in place trying to send commands when the DMCUB isn't powered on. [How] For functions that execute within a DC context or DC lock we can wrap the direct calls to dm_execute_dmub_cmd/list with code that exits idle power optimizations and reallows once we're done with the command submission on success. For DM direct submissions the DM will need to manage the enter/exit sequencing manually. We cannot invoke a DMCUB command directly within the DM execution helper or we can deadlock. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Hansen Dsouza <hansen.dsouza@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-12-19drm/amd/display: Refactor DMCUB enter/exit idle interfaceNicholas Kazlauskas4-12/+43
[Why] We can hang in place trying to send commands when the DMCUB isn't powered on. [How] We need to exit out of the idle state prior to sending a command, but the process that performs the exit also invokes a command itself. Fixing this issue involves the following: 1. Using a software state to track whether or not we need to start the process to exit idle or notify idle. It's possible for the hardware to have exited an idle state without driver knowledge, but entering one is always restricted to a driver allow - which makes the SW state vs HW state mismatch issue purely one of optimization, which should seldomly be hit, if at all. 2. Refactor any instances of exit/notify idle to use a single wrapper that maintains this SW state. This works simialr to dc_allow_idle_optimizations, but works at the DMCUB level and makes sure the state is marked prior to any notify/exit idle so we don't enter an infinite loop. 3. Make sure we exit out of idle prior to sending any commands or waiting for DMCUB idle. This patch takes care of 1/2. A future patch will take care of wrapping DMCUB command submission with calls to this new interface. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Hansen Dsouza <hansen.dsouza@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-12-19drm/amd/display: fix usb-c connector_typeAllen Pan1-0/+5
[why] BIOS switches to use USB-C connector type 0x18, but VBIOS's objectInfo table not supported yet. driver needs to patch it based on enc_cap from system integration info table. Reviewed-by: Charlene Liu <charlene.liu@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Allen Pan <allen.pan@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-12-19drm/amd/display: add debug option for ExtendedVBlank DLG adjustMuhammad Ahmed2-1/+3
[why & how] Add new option for debug usage Reviewed-by: Charlene Liu <charlene.liu@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Muhammad Ahmed <ahmed.ahmed@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-12-19drm/amd/display: Set test_pattern_changed update flag on pipe enableGeorge Shen1-0/+4
[Why] In certain cases, ODM pipe split can occur while stream already has test pattern enabled. The new pipe used in the ODM combine config must be configured to output the test pattern in this case. [How] If the stream is configured to output test pattern, then set the test_pattern_changed update flag for the new pipe when it gets enabled. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: George Shen <george.shen@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-12-19drm/amd/display: dereference variable before checking for zeroJosip Pavic1-1/+1
[Why] Driver incorrectly checks if pointer variable OutBpp is null instead of if the value being pointed to is zero. [How] Dereference OutBpp before checking for a value of zero. Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Josip Pavic <josip.pavic@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-12-19drm/amd/display: get dprefclk ss info from integration info tableCharlene Liu2-5/+16
[why & how] we have two SSC_En: we get ssc_info from dce_info for MPLL_SSC_EN. we used to call VBIOS cmdtbl's smu_info's SS persentage for DPRECLK SS info, is used for DP AUDIO and VBIOS' smu_info table was from systemIntegrationInfoTable. since dcn35 VBIOS removed smu_info, driver need to use integrationInfotable directly. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Charlene Liu <charlene.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-12-19drm/amd/display: skip error logging when DMUB is inactive from S3Samson Tam3-12/+27
[Why] On resume from S3, while DMUB is inactive, DMUB queue and execute calls will not work. Skip reporting errors in these scenarios [How] Add new return code during DMUB queue and execute calls when DMUB is in S3 state. Skip logging errors in these scenarios Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Samson Tam <samson.tam@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-12-19drm/amd/display: make flip_timestamp_in_us a 64-bit variableJosip Pavic1-1/+1
[Why] This variable currently overflows after about 71 minutes. This doesn't cause any known functional issues but it does make debugging more difficult. [How] Make it a 64-bit variable. Reviewed-by: Aric Cyr <aric.cyr@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Josip Pavic <josip.pavic@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-12-19drm/amd/display: Add case for dcn35 to support usb4 dmub hpd eventWayne Lin1-8/+18
[Why & how] Refactor dc_is_dmub_outbox_supported() a bit and add case for dcn35 to register dmub outbox notification irq to handle usb4 relevant hpd event. Reviewed-by: Roman Li <roman.li@amd.com> Reviewed-by: Jun Lei <jun.lei@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-12-19drm/amd/display: disable FPO and SubVP for older DMUB versions on DCN32xHamza Mahfooz1-0/+6
There have recently been changes that break backwards compatibility, that were introduced into DMUB firmware (for DCN32x) concerning FPO and SubVP. So, since those are just power optimization features, we can just disable them unless the user is using a new enough version of DMUB firmware. Cc: stable@vger.kernel.org Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2870 Fixes: ed6e2782e974 ("drm/amd/display: For cursor P-State allow for SubVP") Reported-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com> Closes: https://lore.kernel.org/r/CABXGCsNRb0QbF2pKLJMDhVOKxyGD6-E+8p-4QO6FOWa6zp22_A@mail.gmail.com/ Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-12-19drm/amd/display: Add a new DC debug mask for PSR-SUMario Limonciello1-0/+3
Some issues have been raised that appear to be tied to PSR-SU. To allow users to confirm they're tied to PSR-SU without turning off PSR entirely introduce a new debug mask: amdgpu.dcdebugmask=0x200 Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-12-19drm/amd/display: Add function for dumping clk registersJohnson Chen2-4/+22
[why] Allow devs to check raw clk register values by dumping them on the log [how] Add clk register dump implementation Reviewed-by: Charlene Liu <charlene.liu@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Johnson Chen <johnson.chen@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-12-19drm/amd/display: Unify optimize_required flags and VRR adjustmentsAric Cyr5-17/+10
[why] There is only a single call to dc_post_update_surfaces_to_stream so there is no need to have two flags to control it. Unifying this to a single flag allows dc_stream_adjust_vmin_vmax to skip actual programming when there is no change required. [how] Remove wm_optimze_required flag and set only optimize_required in its place. Then in dc_stream_adjust_vmin_vmax, check that the stream timing range matches the requested one and skip programming if they are equal. Reviewed-by: Jun Lei <jun.lei@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-12-15drm/amd/display: Revert " drm/amd/display: Use channel_width = 2 for vram ↵Alvin Lee1-7/+1
table 3.0" [Description] Revert commit fec05adc40c2 ("drm/amd/display: Use channel_width = 2 for vram table 3.0") Because the issue is being fixed from VBIOS side. Reviewed-by: Samson Tam <samson.tam@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-12-15drm/amd/display: remove HPO PG in driver sideMuhammad Ahmed1-0/+1
[why & how] Add config to make HPO PG handled in dmubfw ips entry/exit Reviewed-by: Charlene Liu <charlene.liu@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Muhammad Ahmed <ahmed.ahmed@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-12-15drm/amd/display: do not send commands to DMUB if DMUB is inactive from S3Samson Tam5-0/+55
[Why] On resume from S3, may get apply_idle_optimizations call while DMUB is inactive which will just time out. [How] Set and track power state in dmub_srv and check power state before sending commands to DMUB. Add interface in both dmub_srv and dc_dmub_srv Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Samson Tam <samson.tam@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-12-14drm/amd/display: fix documentation for dm_crtc_additional_color_mgmt()Melissa Wen1-1/+1
warning: expecting prototype for drm_crtc_additional_color_mgmt(). Prototype was for dm_crtc_additional_color_mgmt() instead Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202312141801.o9eBCxt9-lkp@intel.com/ Signed-off-by: Melissa Wen <mwen@igalia.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-12-14drm/amd/display: fix documentation for amdgpu_dm_verify_lut3d_size()Alex Deucher1-1/+1
It takes the plane state rather than the crtc state. Fixes: aba8b76baabd ("drm/amd/display: add plane shaper LUT support") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Reviewed-by: Melissa Wen <mwen@igalia.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: Melissa Wen <mwen@igalia.com> Cc: Harry.Wentland@amd.com
2023-12-14drm/amd/display: Add 3x4 CTM support for plane CTMJoshua Ashton2-4/+26
Create drm_color_ctm_3x4 to support 3x4-dimension plane CTM matrix and convert DRM CTM to DC CSC float matrix. v3: - rename ctm2 to ctm_3x4 (Harry) Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Joshua Ashton <joshua@froggi.es> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-12-14drm/amd/display: add plane CTM supportMelissa Wen2-0/+27
Map the plane CTM driver-specific property to DC plane, instead of DC stream. The remaining steps to program DPP block are already implemented on DC shared-code. v3: - fix comment about plane and CRTC CTMs priorities (Harry) Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Melissa Wen <mwen@igalia.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-12-14drm/amd/display: add plane CTM driver-specific propertyMelissa Wen3-0/+35
Plane CTM for pre-blending color space conversion. Only enable driver-specific plane CTM property on drivers that support both pre- and post-blending gamut remap matrix, i.e., DCN3+ family. Otherwise it conflits with DRM CRTC CTM property. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Melissa Wen <mwen@igalia.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-12-14drm/amd/display: copy 3D LUT settings from crtc state to stream_updateJoshua Ashton1-0/+4
When commiting planes, we copy color mgmt resources to the stream state. Do the same for shaper and 3D LUTs. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Joshua Ashton <joshua@froggi.es> Co-developed-by: Melissa Wen <mwen@igalia.com> Signed-off-by: Melissa Wen <mwen@igalia.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-12-14drm/amd/pm: support return vpe clock tablePeyton Lee1-0/+2
pm supports return vpe clock table and soc clock table Signed-off-by: Peyton Lee <peytolee@amd.com> Reviewed-by: Li Ma <li.ma@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-12-14drm/amd/display: allow newer DC hardware to use degamma ROM for PQ/HLGJoshua Ashton1-11/+18
Need to funnel the color caps through to these functions so it can check that the hardware is capable. v2: - remove redundant color caps assignment on plane degamma map (Harry) - pass color caps to degamma params v3: - remove unused color_caps parameter from set_color_properties (Harry) Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Joshua Ashton <joshua@froggi.es> Signed-off-by: Melissa Wen <mwen@igalia.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-12-14drm/amd/display: add plane blend LUT and TF supportJoshua Ashton2-4/+53
Map plane blend properties to DPP blend gamma. Plane blend is a post-3D LUT curve that linearizes color space for blending. It may be defined by a user-blob LUT and/or predefined transfer function. As hardcoded curve (ROM) is not supported on blend gamma, we use AMD color module to fill parameters when setting non-linear TF with empty LUT. v2: - rename DRM TFs to AMDGPU TFs Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Joshua Ashton <joshua@froggi.es> Signed-off-by: Melissa Wen <mwen@igalia.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-12-14drm/amd/display: handle empty LUTs in __set_input_tfJoshua Ashton1-8/+12
Unlike degamma, blend gamma doesn't support hardcoded curve (predefined/ROM), but we can use AMD color module to fill blend gamma parameters when we have non-linear plane gamma TF without plane gamma LUT. The regular degamma path doesn't hit this. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Joshua Ashton <joshua@froggi.es> Signed-off-by: Melissa Wen <mwen@igalia.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-12-14drm/amd/display: add plane 3D LUT supportMelissa Wen2-4/+99
Wire up DC 3D LUT to DM plane color management (pre-blending). On AMD display HW, 3D LUT comes after a shaper curve and we always have to program a shaper curve to delinearize or normalize the color space before applying a 3D LUT (since we have a reduced number of LUT entries). In this version, the default values of 3D LUT for size and bit_depth are 17x17x17 and 12-bit, but we already provide here a more generic mechanisms to program other supported values (9x9x9 size and 10-bit). v2: - started with plane 3D LUT instead of CRTC 3D LUT support v4: - lut3d_size is the max dimension size instead of # of entries Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Melissa Wen <mwen@igalia.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-12-14drm/amd/display: add plane shaper TF supportMelissa Wen1-4/+11
Enable usage of predefined transfer func in addition to shaper 1D LUT. That means we can save some complexity by just setting a predefined curve, instead of programming a custom curve when preparing color space for applying 3D LUT. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Melissa Wen <mwen@igalia.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-12-14drm/amd/display: add plane shaper LUT supportMelissa Wen3-4/+92
Map DC shaper LUT to DM plane color management. Shaper LUT can be used to delinearize and/or normalize the color space for computational efficiency and achiving specific visual styles. If a plane degamma is apply to linearize the color space, a custom shaper 1D LUT can be used just before applying 3D LUT. v2: - use DPP color caps to verify plane 3D LUT support - add debug message if shaper LUT programming fails v4: - remove helper to check 3D LUT color caps (Harry) - update desc of lut3d-setup helper from MPC to DPP v5: - remove color_mgmt_changed check that prevents color updates (Joshua) Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Melissa Wen <mwen@igalia.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-12-14drm/amd/display: add HDR multiplier supportJoshua Ashton2-0/+4
With `dc_fixpt_from_s3132()` translation, we can just use it to set hdr_mult. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Joshua Ashton <joshua@froggi.es> Signed-off-by: Melissa Wen <mwen@igalia.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-12-14drm/amd/display: add dc_fixpt_from_s3132 helperJoshua Ashton2-7/+13
Detach value translation from CTM to reuse it for programming HDR multiplier property. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Joshua Ashton <joshua@froggi.es> Signed-off-by: Melissa Wen <mwen@igalia.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-12-14drm/amd/display: reject atomic commit if setting both plane and CRTC degammaMelissa Wen1-1/+12
DC only has pre-blending degamma caps (plane/DPP) that is currently in use for CRTC/post-blending degamma, so that we don't have HW caps to perform plane and CRTC degamma at the same time. Reject atomic updates when serspace sets both plane and CRTC degamma properties. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Melissa Wen <mwen@igalia.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-12-14drm/amd/display: add plane degamma TF and LUT supportJoshua Ashton3-6/+69
Set DC plane with user degamma LUT or predefined TF from driver-specific plane color properties. If plane and CRTC degamma are set in the same time, plane degamma has priority. That means, we only set CRTC degamma if we don't have plane degamma LUT or TF to configure. We return -EINVAL if we don't have plane degamma settings, so we can continue and check CRTC degamma. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Joshua Ashton <joshua@froggi.es> Signed-off-by: Melissa Wen <mwen@igalia.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-12-14drm/amd/display: decouple steps for mapping CRTC degamma to DC planeMelissa Wen1-18/+42
The next patch adds pre-blending degamma to AMD color mgmt pipeline, but pre-blending degamma caps (DPP) is currently in use to provide DRM CRTC atomic degamma or implict degamma on legacy gamma. Detach degamma usage regarging CRTC color properties to manage plane and CRTC color correction combinations. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Melissa Wen <mwen@igalia.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-12-14drm/amd/display: mark plane as needing reset if color props changeJoshua Ashton1-0/+15
We should reset a plane state if at least one of the color management properties differs from old and new state. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Joshua Ashton <joshua@froggi.es> Co-developed-by: Melissa Wen <mwen@igalia.com> Signed-off-by: Melissa Wen <mwen@igalia.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-12-14drm/amd/display: set sdr_ref_white_level to 80 for out_transfer_funcJoshua Ashton1-0/+2
Otherwise this is just initialized to 0. This needs to actually have a value so that compute_curve can work for PQ EOTF. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Joshua Ashton <joshua@froggi.es> Co-developed-by: Melissa Wen <mwen@igalia.com> Signed-off-by: Melissa Wen <mwen@igalia.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-12-14drm/amd: include drm/drm_edid.h only where neededJani Nikula2-0/+2
Including drm_edid.h from amdgpu_mode.h causes the rebuild of literally hundreds of files when drm_edid.h is modified, while there are only a handful of files that actually need to include drm_edid.h. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-12-14drm/amd/display: add CRTC gamma TF supportJoshua Ashton2-17/+61
Add predefined transfer function programming. There is no post-blending out gamma ROM for hardcoded curves, but we can use AMD color modules to program LUT parameters from pre-defined coefficients and an empty regamma LUT (or bump up LUT parameters with pre-defined TF values). v2: - update crtc color mgmt if regamma TF differs between states (Joshua) - map inverse EOTF to DC transfer function (Melissa) v3: - update AMDGPU TF list v4: - update comment regarding regamma behavior Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Joshua Ashton <joshua@froggi.es> Co-developed-by: Melissa Wen <mwen@igalia.com> Signed-off-by: Melissa Wen <mwen@igalia.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-12-14drm/amd/display: encapsulate atomic regamma operationMelissa Wen1-20/+35
We will wire up MPC 3D LUT to DM CRTC color pipeline in the next patch, but so far, only for atomic interface. By checking set_output_transfer_func in DC drivers with MPC 3D LUT support, we can verify that regamma is only programmed when 3D LUT programming fails. As a groundwork to introduce 3D LUT programming and better understand each step, detach atomic regamma programming from the crtc colocr updating code. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Melissa Wen <mwen@igalia.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-12-14drm/amd/display: add comments to describe DM crtc color mgmt behaviorMelissa Wen1-2/+14
Describe some expected behavior of the AMD DM color mgmt programming. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Melissa Wen <mwen@igalia.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-12-14drm/amd/display: add CRTC gamma TF driver-specific propertyMelissa Wen3-0/+87
Add AMD pre-defined transfer function property to default DRM CRTC gamma to convert to wire encoding with or without a user gamma LUT. There is no post-blending regamma ROM for pre-defined TF. When setting Gamma TF (!= Identity) and LUT at the same time, the color module will combine the pre-defined TF and the custom LUT values into the LUT that's actually programmed. v2: - enable CRTC prop in the end of driver-specific prop sequence - define inverse EOTFs as supported regamma TFs - reword driver-specific function doc to remove shaper/3D LUT v3: - spell out TF+LUT behavior in the commit and comments (Harry) Reviewed-by: Harry Wentland <harry.wentland@amd.com> Co-developed-by: Joshua Ashton <joshua@froggi.es> Signed-off-by: Joshua Ashton <joshua@froggi.es> Signed-off-by: Melissa Wen <mwen@igalia.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.39.0) at 2026-05-25 22:33:40 +0300