summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd/display
AgeCommit message (Collapse)AuthorFilesLines
2024-12-10drm/amd/display: Don't allow IPS2 in D0 for RCG DynamicNicholas Kazlauskas2-1/+5
[Why] The existing changes to the DPMS off flag should help reduce accidental entry, but this change further restricts the entry condition. [How] Record last power state as sent to DMUB. Don't send IPS2 allow if it's D0. Reviewed-by: Ovidiu Bunea <ovidiu.bunea@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-12-10drm/amd/display: Populate chroma prefetch parameters, DET buffer fixAusef Yousof2-11/+29
[WHY] Soft hang/lag observed during 10bit playback + moving cursor, corruption observed in other tickets for same reason, also failing MPO. 1. Currently, we are always running calculate_lowest_supported_state_for_temp_read which is only necessary on dGPU 2. Fast validate path does not apply DET buffer allocation policy 3. Prefetch UrgBFactor chroma parameter not populated in prefetch calculation [HOW] 1. Add a check to see if we are on APU, if so, skip the code 2. Add det buffer alloc policy checks to fast validate path 3. Populate UrgentBurstChroma param in call to calculate UrgBChroma prefetch values -revision commits: small formatting/brackets/null check addition + remove test change + dGPU code Reviewed-by: Charlene Liu <charlene.liu@amd.com> Signed-off-by: Ausef Yousof <Ausef.Yousof@amd.com> Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-12-10drm/amd/display: correct dcn351 dpm clk table based on pmfw_drv_ifCharlene Liu2-15/+119
[why] driver got wrong clock table due to miss match dtm_table headers. correct the dtn_clock table based on pmfw header. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Reviewed-by: Sung joon Kim <sungjoon.kim@amd.com> Signed-off-by: Charlene Liu <Charlene.Liu@amd.com> Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-12-10drm/amd/display: Revised for Replay Pseudo vblank controlDennis Chan3-5/+5
[why] Revised Replay Full screen video Pseudo vblank control. Reviewed-by: ChunTao Tso <chuntao.tso@amd.com> Signed-off-by: Dennis Chan <dennis.chan@amd.com> Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-12-10drm/amd/display: 3.2.311Aric Cyr1-1/+1
This version brings along following fixes: - Add hblank borrowing support - Limit VTotal range to max hw cap minus fp - Correct prefetch calculation - Add option to retrieve detile buffer size - Add support for custom recout_width in SPL - Add disable_ips_in_dpms_off flag for IPS - Enable EASF based on luma taps only - Add a left edge pixel if in YCbCr422 or YCbCr420 and odm Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-12-10drm/amd/display: Add support for custom recout_width in SPLSamson Tam3-12/+37
[WHY] Add support for custom recout_width for mpc combine in SPL [HOW] 1. Rename mpc_combine_h and mpc_combine_v 2. Add flag use_recout_width_aligned to use custom recout_width 3. Create union to use either mpc_num_h_slices or mpc_recout_width_align Reviewed-by: Navid Assadian <navid.assadian@amd.com> Signed-off-by: Samson Tam <Samson.Tam@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-12-10drm/amd/display: Add disable_ips_in_dpms_off flag for IPSNicholas Kazlauskas2-1/+2
[WHY] It's possible we still allow IPS2 when all streams are DPMS off but this is unexpected. [HOW] Pass the DM config value into DC so it can use the pure stream count to decide. We will be in 0 streams for S0i3 so this will still allow it for D3. Reviewed-by: Ovidiu Bunea <ovidiu.bunea@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-12-10drm/amd/display: Enable EASF based on luma taps onlySamson Tam1-4/+2
[WHY] EASF only applies to luma. Previously both luma and chroma taps were checked to determine whether to enable EASF. [HOW] Only check if luma taps are supported before determining whether to enable EASF or not. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Samson Tam <Samson.Tam@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-12-10drm/amdgpu: pass ip_block in set_clockgating_stateBoyuan Zhang1-1/+1
Pass ip_block instead of adev in set_clockgating_state() callback functions. Modify set_clockgating_state()for all correspoding ip blocks. v2: remove all changes for is_idle(), remove type casting Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Sunil Khatri <sunil.khatri@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-12-10drm/amdgpu: pass ip_block in set_powergating_stateBoyuan Zhang1-1/+1
Pass ip_block instead of adev in set_powergating_state callback function. Modify set_powergating_state ip functions for all correspoding ip blocks. v2: fix a ip block index error. v3: remove type casting Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com> Suggested-by: Christian König <christian.koenig@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Sunil Khatri <sunil.khatri@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-12-09Merge remote-tracking branch 'drm/drm-next' into drm-misc-nextMaarten Lankhorst27-13/+193
The v6.13-rc2 release included a bunch of breaking changes, specifically the MODULE_IMPORT_NS commit. Backmerge in order to fix them before the next pull-request. Include the fix from Stephen Roswell. Caused by commit 25c3fd1183c0 ("drm/virtio: Add a helper to map and note the dma addrs and lengths") Interacting with commit cdd30ebb1b9f ("module: Convert symbol namespace to string literal") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Link: https://patchwork.freedesktop.org/patch/msgid/20241209121717.2abe8026@canb.auug.org.au Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
2024-12-03drm/amd/display: Add hblank borrowing supportChris Park9-7/+75
[WHY] Some DSC timing failed at bandwidth validation due to hactive can't be evenly divided on each ODM segment. [HOW] Borrow from hblank to increase hactive to support these timing. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Chris Park <chris.park@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-12-03drm/amd/display: Limit VTotal range to max hw cap minus fpDillon Varone11-3/+46
[WHY & HOW] Hardware does not support the VTotal to be between fp2 lines of the maximum possible VTotal, so add a capability flag to track it and apply where necessary. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Jun Lei <jun.lei@amd.com> Reviewed-by: Anthony Koo <anthony.koo@amd.com> Signed-off-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-12-03drm/amd/display: Correct prefetch calculationLo-an Chen1-0/+1
[WHY] The minimum value of the dst_y_prefetch_equ was not correct in prefetch calculation whice causes OPTC underflow. [HOW] Add the min operation of dst_y_prefetch_equ in prefetch calculation. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Lo-an Chen <lo-an.chen@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-12-03drm/amd/display: Add option to retrieve detile buffer sizeSung Lee10-0/+36
[WHY] For better power profiling knowing the detile buffer size at a given point in time would be useful. [HOW] Add interface to retrieve detile buffer from dc state. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Sung Lee <Sung.Lee@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-12-03drm/amd/display: Add a left edge pixel if in YCbCr422 or YCbCr420 and odmPeterson Guo1-0/+23
[WHY] On some cards when odm is used, the monitor will have 2 separate pipes split vertically. When compression is used on the YCbCr colour space on the second pipe to have correct colours, we need to read a pixel from the end of first pipe to accurately display colours. Hardware was programmed properly to account for this extra pixel but it was not calculated properly in software causing a split screen on some monitors. [HOW] The fix adjusts the second pipe's viewport and timings if the pixel encoding is YCbCr422 or YCbCr420. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: George Shen <george.shen@amd.com> Signed-off-by: Peterson Guo <peterson.guo@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-12-03drm/amd/display: Fix programming backlight on OLED panelsMario Limonciello1-0/+2
commit 38077562e059 ("drm/amd/display: Implement new backlight_level_params structure") adjusted DC core to require the backlight type to be programmed in the dc link when changing brightness. This isn't initialized in amdgpu_dm for OLED panels though which broke brightness. Explicitly initialize when aux support is enabled. Reported-and-tested-by: Luke Jones <luke@ljones.dev> Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3792 Fixes: 38077562e059 ("drm/amd/display: Implement new backlight_level_params structure") Reviewed-by: Harry Wentland <harry.wentland@amd.com> Link: https://lore.kernel.org/r/20241128032200.2085398-1-superm1@kernel.org Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-12-03drm/amd: Sanity check the ACPI EDIDMario Limonciello1-3/+10
An HP Pavilion Aero Laptop 13-be0xxx/8916 has an ACPI EDID, but using it is causing corruption. It's got illogical values of not specifying a digital interface. Sanity check the ACPI EDID to avoid tripping such problems. Suggested-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Reported-and-tested-by: Chris Bainbridge <chris.bainbridge@gmail.com> Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3782 Fixes: c6a837088bed ("drm/amd/display: Fetch the EDID from _DDC if available for eDP") Reviewed-by: Harry Wentland <harry.wentland@amd.com> Link: https://lore.kernel.org/r/20241128032500.2088288-1-superm1@kernel.org Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-12-02Merge drm/drm-next into drm-misc-nextMaxime Ripard95-942/+803
Kickstart 6.14 cycle. Signed-off-by: Maxime Ripard <mripard@kernel.org>
2024-11-21drm/amd/display: Add support for minimum backlight quirkThomas Weißschuh1-0/+6
Not all platforms provide the full range of PWM backlight capabilities supported by the hardware through ATIF. Use the generic drm panel minimum backlight quirk infrastructure to override the capabilities where necessary. Testing the backlight quirk together with the "panel_power_savings" sysfs file has not shown any negative impact. One quirk seems to be that 0% at panel_power_savings=0 seems to be slightly darker than at panel_power_savings=4. Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Tested-by: Dustin L. Howett <dustin@howett.net> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241111-amdgpu-min-backlight-quirk-v7-2-f662851fda69@weissschuh.net
2024-11-20drm/amd/display: Allow building DC with clang on LoongArchHuacai Chen1-7/+8
Clang on LoongArch (18+) appears to be unaffected by the bug causing excessive stack usage in calculate_bandwidth(). But when building DC_FP support the stack frame size can be as large as 2816 bytes, which causes the FRAME_WARN build warnings. So on LoongArch we allow building DC with clang, but disable DC_FP by default. The help message is also updated. Tested-by: Rui Wang <wangrui@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-11-20drm/amd/display: Fix null check for pipe_ctx->plane_state in hwss_setup_dppZicheng Qu1-0/+3
This commit addresses a null pointer dereference issue in hwss_setup_dpp(). The issue could occur when pipe_ctx->plane_state is null. The fix adds a check to ensure `pipe_ctx->plane_state` is not null before accessing. This prevents a null pointer dereference. Fixes: 0baae6246307 ("drm/amd/display: Refactor fast update to use new HWSS build sequence") Reviewed-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Zicheng Qu <quzicheng@huawei.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-11-20drm/amd/display: Fix null check for pipe_ctx->plane_state in dcn20_program_pipeZicheng Qu1-3/+3
This commit addresses a null pointer dereference issue in dcn20_program_pipe(). Previously, commit 8e4ed3cf1642 ("drm/amd/display: Add null check for pipe_ctx->plane_state in dcn20_program_pipe") partially fixed the null pointer dereference issue. However, in dcn20_update_dchubp_dpp(), the variable pipe_ctx is passed in, and plane_state is accessed again through pipe_ctx. Multiple if statements directly call attributes of plane_state, leading to potential null pointer dereference issues. This patch adds necessary null checks to ensure stability. Fixes: 8e4ed3cf1642 ("drm/amd/display: Add null check for pipe_ctx->plane_state in dcn20_program_pipe") Reviewed-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Zicheng Qu <quzicheng@huawei.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-11-20drm/amd/display: 3.2.310Aric Cyr1-1/+1
This version brings along the following: - DC core fixes - DCN35 fix - DCN4+ fixes - DML2 fix - New SPL features Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-11-20drm/amd/display: Remove PIPE_DTO_SRC_SEL programming from set_dtbclk_dtoOvidiu Bunea1-6/+9
There are cases where an OTG is remapped from driving a regular HDMI display to a DP/eDP display. There are also cases where DTBCLK needs to be enabled for HPO, but DTBCLK DTO programming may be done while OTG is still enabled which is dangerous as the PIPE_DTO_SRC_SEL programming may change the pixel clock generator source for a mapped and running OTG and cause it to hang. Remove the PIPE_DTO_SRC_SEL programming from this sequence since it is already done in program_pixel_clk(). Additionally, make sure that program_pixel_clk sets DTBCLK DTO as source for special HDMI cases. Cc: stable@vger.kernel.org # 6.11+ Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Ovidiu Bunea <Ovidiu.Bunea@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-11-20drm/amd/display: allow chroma 1:1 scaling when sharpness is offSamson Tam1-14/+20
[Why] SPL code forces taps to 1 when ratio is 1:1 and sharpness is off But for chroma 1:1, need taps > 1 to handle cositing [How] Do not force chroma taps to 1 when ratio is 1:1 for YUV420 Remove 420_CHROMA_BYPASS mode for scaler Reviewed-by: Navid Assadian <navid.assadian@amd.com> Signed-off-by: Samson Tam <Samson.Tam@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-11-20drm/amd/display: Populate Power Profile In Case of Early ReturnAustin Zheng1-2/+2
Early return possible if context has no clk_mgr. This will lead to an invalid power profile being returned which looks identical to a profile with the lowest power level. Add back logic that populated the power profile and overwrite the value if needed. Cc: stable@vger.kernel.org Fixes: d016d0dd5a57 ("drm/amd/display: Update Interface to Check UCLK DPM") Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Austin Zheng <Austin.Zheng@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-11-20drm/amd/display: add public taps API in SPLSamson Tam2-17/+48
[Why] Add public API to obtain number of taps in SPL. [How] Isolate function to calculate recout, ratios and viewport before calculating taps. Call function in both public taps API call and private scaling call. Reviewed-by: Jun Lei <jun.lei@amd.com> Signed-off-by: Samson Tam <Samson.Tam@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-11-20drm/amd/display: Enable Request rate limiter during C-State on dcn401Dillon Varone8-11/+53
[WHY] When C-State entry is requested, the rate limiter will be disabled which can result in high contention in the DCHUB return path. [HOW] Enable the rate limiter during C-state requests to prevent contention. Cc: stable@vger.kernel.org # 6.11+ Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-11-20drm/amd/display: Fix handling of plane refcountJoshua Aberback1-0/+3
[Why] The mechanism to backup and restore plane states doesn't maintain refcount, which can cause issues if the refcount of the plane changes in between backup and restore operations, such as memory leaks if the refcount was supposed to go down, or double frees / invalid memory accesses if the refcount was supposed to go up. [How] Cache and re-apply current refcount when restoring plane states. Cc: stable@vger.kernel.org Reviewed-by: Josip Pavic <josip.pavic@amd.com> Signed-off-by: Joshua Aberback <joshua.aberback@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-11-20drm/amd/display: Ignore scalar validation failure if pipe is phantomChris Park1-0/+8
[Why] There are some pipe scaler validation failure when the pipe is phantom and causes crash in DML validation. Since, scalar parameters are not as important in phantom pipe and we require this plane to do successful MCLK switches, the failure condition can be ignored. [How] Ignore scalar validation failure if the pipe validation is marked as phantom pipe. Cc: stable@vger.kernel.org # 6.11+ Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Chris Park <chris.park@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-11-20drm/amd/display: update pipe selection policy to check head pipeYihan Zhu1-1/+22
[Why] No check on head pipe during the dml to dc hw mapping will allow illegal pipe usage. This will result in a wrong pipe topology to cause mpcc tree totally mess up then cause a display hang. [How] Avoid to use the pipe is head in all check and avoid ODM slice during preferred pipe check. Cc: stable@vger.kernel.org Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Yihan Zhu <Yihan.Zhu@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-11-20drm/amd/display: remove redundant is_dsc_possible checkBhavin Sharma1-8/+5
Since is_dsc_possible is already checked just above, there's no need to check it again before filling out the DSC settings. Signed-off-by: Bhavin Sharma <bhavin.sharma@siliconsignals.io> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-11-13Revert "drm/amd/display: parse umc_info or vram_info based on ASIC"Alex Deucher1-3/+1
This reverts commit 2551b4a321a68134360b860113dd460133e856e5. This was not the root cause. Revert. Link: https://gitlab.freedesktop.org/drm/amd/-/issues/3678 Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: aurabindo.pillai@amd.com Cc: hamishclaxton@gmail.com
2024-11-13drm/amd/display: Fix failure to read vram info due to static BP_RESULTHamish Claxton1-1/+1
The static declaration causes the check to fail. Remove it. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3678 Fixes: 00c391102abc ("drm/amd/display: Add misc DC changes for DCN401") Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Hamish Claxton <hamishclaxton@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: aurabindo.pillai@amd.com Cc: hamishclaxton@gmail.com
2024-11-11drm/amd/display: 3.2.309Aric Cyr3-8/+32
This version brings along the following: - DML2 fixes - DP fixes - DPMS fix - HPD fixes - Misc cleanup - ODM fix - Replay fix - SPL fix Reviewed-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-11-11drm/amd/display: Adjust VSDB parser for replay featureRodrigo Siqueira1-1/+1
At some point, the IEEE ID identification for the replay check in the AMD EDID was added. However, this check causes the following out-of-bounds issues when using KASAN: [ 27.804016] BUG: KASAN: slab-out-of-bounds in amdgpu_dm_update_freesync_caps+0xefa/0x17a0 [amdgpu] [ 27.804788] Read of size 1 at addr ffff8881647fdb00 by task systemd-udevd/383 ... [ 27.821207] Memory state around the buggy address: [ 27.821215] ffff8881647fda00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 27.821224] ffff8881647fda80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 27.821234] >ffff8881647fdb00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 27.821243] ^ [ 27.821250] ffff8881647fdb80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 27.821259] ffff8881647fdc00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 27.821268] ================================================================== This is caused because the ID extraction happens outside of the range of the edid lenght. This commit addresses this issue by considering the amd_vsdb_block size. Cc: ChiaHsuan Chung <chiahsuan.chung@amd.com> Reviewed-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-11-11drm/amd/display: Remove unused codeRodrigo Siqueira1-13/+0
This commit removes a legacy debug_defaults_diags struct. Reviewed-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-11-11drm/amd/display: Require minimum VBlank size for stutter optimizationDillon Varone1-2/+9
If the nominal VBlank is too small, optimizing for stutter can cause the prefetch bandwidth to increase drasticaly, resulting in higher clock and power requirements. Only optimize if it is >3x the stutter latency. Reviewed-by: Austin Zheng <austin.zheng@amd.com> Signed-off-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-11-08drm/amd/display: Handle dml allocation failure to avoid crashRyan Seto1-0/+3
[Why] In the case where a dml allocation fails for any reason, the current state's dml contexts would no longer be valid. Then subsequent calls dc_state_copy_internal would shallow copy invalid memory and if the new state was released, a double free would occur. [How] Reset dml pointers in new_state to NULL and avoid invalid pointer Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Ryan Seto <ryanseto@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-11-08drm/amd/display: Use region6 size in fw_meta_infoJinZe Xu1-1/+3
[Why] If driver allocated region6 size is not same as the size in firmware, dmcub won't enable region6. [How] Use region6 size in dmcub_fw_meta instead of a constant value. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: JinZe Xu <jinze.xu@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-11-08drm/amd/display: Update SPL Taps Required For Integer ScalingAustin Zheng1-4/+11
Number of taps is incorrectly being set when integer scaling is enabled. Taps required when src_rect != dst_rect previously not considered. Perform the calculations when integer scaling is enabled. Set taps to 1 if the scaling ratio is 1:1. Reviewed-by: Samson Tam <samson.tam@amd.com> Signed-off-by: Austin Zheng <Austin.Zheng@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-11-08drm/amd/display: disabling p-state checks for DCN31 and DCN314Emily Nie3-2/+25
[Why] IGT displays Dmesg warnings which are likely false [How] Disabling p-state checks leading to this warning for DCN31 and DCN314 Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Emily Nie <Emily.Nie@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-11-08drm/amd/display: always blank stream before disable crtcFudongwang1-4/+6
Garbage will show due to dig is on. So blank stream needed. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Fudongwang <Fudong.Wang@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-11-08drm/amd/display: Read DP tunneling support only for DPIA endpointsAurabindo Pillai1-3/+5
Unconditionally reading DP tunneling support results in extraneous errors messages on certain devices. Fix this by guarding the DPCD read for DP tunneling support for USB4 DPIA endpoints. Reviewed-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-11-08drm/amd/display: Adding flag for forced MST blocked discoveryMeenakshikumar Somasundaram1-0/+1
[Why] Need a flag to force MST blocked discovery for certain branch devices. [How] Added a flag to force MST blocked discovery in struct dc_panel_patch. Reviewed-by: PeiChen Huang <peichen.huang@amd.com> Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-11-08drm/amd/display: Fix Panel Replay not update screen correctlyTom Chung2-57/+59
[Why] In certain use case such as KDE login screen, there will be no atomic commit while do the frame update. If the Panel Replay enabled, it will cause the screen not updated and looks like system hang. [How] Delay few atomic commits before enabled the Panel Replay just like PSR. Fixes: be64336307a6c ("drm/amd/display: Re-enable panel replay feature") Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3686 Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3682 Tested-By: Corey Hickey <bugfood-c@fatooh.org> Tested-By: James Courtier-Dutton <james.dutton@gmail.com> Reviewed-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-11-08drm/amd/display: Change some variable name of psrTom Chung4-14/+14
Panel Replay feature may also use the same variable with PSR. Change the variable name and make it not specify for PSR. Reviewed-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-11-08drm/amd/display: Change parameters to fix certain compiler errorsRevalla Hari Krishna2-2/+2
[Why] String literals must be assigned to const char pointers. [How] By adding const keyword to fix compilation errors. Reviewed-by: Lohita Mudimela <lohita.mudimela@amd.com> Signed-off-by: Revalla Hari Krishna <Harikrishna.Revalla@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-11-08drm/amd/display: Refactor HPD IRQ error checking flowLeon Huang1-13/+3
[Why] HPD error status does not cover Replay desync error status while executing autotests and CTS tests. [How] Refactor the checking flow, reporting the HPD error based on different eDP feature. Reviewed-by: Robin Chen <robin.chen@amd.com> Signed-off-by: Leon Huang <Leon.Huang1@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>