summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd/display
AgeCommit message (Collapse)AuthorFilesLines
2023-10-20drm/amd/display: Don't set dpms_off for seamless bootDaniel Miess1-0/+3
commit 23645bca98304a2772f0de96f97370dd567d0ae6 upstream. [Why] eDPs fail to light up with seamless boot enabled [How] When seamless boot is enabled don't configure dpms_off in disable_vbios_mode_if_required. Reviewed-by: Charlene Liu <charlene.liu@amd.com> Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Daniel Miess <daniel.miess@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-10drm/amd/display: Adjust the MST resume flowWayne Lin1-13/+80
commit ec5fa9fcdeca69edf7dab5ca3b2e0ceb1c08fe9a upstream. [Why] In drm_dp_mst_topology_mgr_resume() today, it will resume the mst branch to be ready handling mst mode and also consecutively do the mst topology probing. Which will cause the dirver have chance to fire hotplug event before restoring the old state. Then Userspace will react to the hotplug event based on a wrong state. [How] Adjust the mst resume flow as: 1. set dpcd to resume mst branch status 2. restore source old state 3. Do mst resume topology probing For drm_dp_mst_topology_mgr_resume(), it's better to adjust it to pull out topology probing work into a 2nd part procedure of the mst resume. Will have a follow up patch in drm. Reviewed-by: Chao-kai Wang <stylon.wang@amd.com> Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Acked-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> [ Adjust for missing variable rename in f0127cb11299 ("drm/amdgpu/display/mst: adjust the naming of mst_port and port of aconnector") ] Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-06drm/amd/display: Don't check registers, if using AUX BL controlSwapnil Patel1-1/+3
[ Upstream commit f5b2c10b57615828b531bb0ae56bd6325a41167e ] [Why] Currently the driver looks DCN registers to access if BL is on or not. This check is not valid if we are using AUX based brightness control. This causes driver to not send out "backlight off" command during power off sequence as it already thinks it is off. [How] Only check DCN registers if we aren't using AUX based brightness control. Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Acked-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Swapnil Patel <swapnil.patel@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-23drm/amd/display: fix the white screen issue when >= 64GB DRAMYifan Zhang1-5/+9
commit ef064187a9709393a981a56cce1e31880fd97107 upstream. Dropping bit 31:4 of page table base is wrong, it makes page table base points to wrong address if phys addr is beyond 64GB; dropping page_table_start/end bit 31:4 is unnecessary since dcn20_vmid_setup will do that. Also, while we are at it, cleanup the assignments using upper_32_bits()/lower_32_bits() and AMDGPU_GPU_PAGE_SHIFT. Cc: stable@vger.kernel.org Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2354 Fixes: 81d0bcf99009 ("drm/amdgpu: make display pinning more flexible (v2)") Acked-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com> Co-developed-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-09-23Revert "drm/amd: Disable S/G for APUs when 64GB or more host memory"Hamza Mahfooz1-2/+3
commit 169ed4ece8373f02f10642eae5240e3d1ef5c038 upstream. This reverts commit 70e64c4d522b732e31c6475a3be2349de337d321. Since, we now have an actual fix for this issue, we can get rid of this workaround as it can cause pin failures if enough VRAM isn't carved out by the BIOS. Cc: stable@vger.kernel.org # 6.1+ Acked-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-09-23drm/amd/display: Blocking invalid 420 modes on HDMI TMDS for DCN314Leo Chen1-1/+3
[ Upstream commit 4c6107a653ccf361cb1b6ba35d558a1a5e6e57ac ] [Why & How] HDMI TMDS does not have ODM support. Filtering 420 modes that exceed the 4096 FMT limitation on DCN314 will resolve intermittent corruptions issues. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Leo Chen <sancchen@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-23drm/amd/display: Blocking invalid 420 modes on HDMI TMDS for DCN31Leo Chen1-1/+3
[ Upstream commit 026a71babf48efb6b9884a3a66fa31aec9e1ea54 ] [Why & How] HDMI TMDS does not have ODM support. Filtering 420 modes that exceed the 4096 FMT limitation on DCN31 will resolve intermittent corruptions issues. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Leo Chen <sancchen@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-23drm/amd/display: Use DTBCLK as refclk instead of DPREFCLKAustin Zheng1-1/+2
[ Upstream commit 4a30cc2bd281fa176a68b5305cd3695d636152ad ] [Why] Flash of corruption observed when UCLK switching after transitioning from DTBCLK to DPREFCLK on subVP(DP) + subVP(HDMI) config Scenario where DPREFCLK is required instead of DTBCLK is not expected [How] Always set the DTBCLK source as DTBCLK0 Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Austin Zheng <austin.zheng@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-23drm/amd/display: Fix underflow issue on 175hz timingLeo Ma1-1/+6
[ Upstream commit 735688eb905db529efea0c78466fccc1461c3fde ] [Why] Screen underflows happen on 175hz timing for 3 plane overlay case. [How] Based on dst y prefetch value clamp to equ or oto for bandwidth calculation. Reviewed-by: Dillon Varone <dillon.varone@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Leo Ma <hanghong.ma@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-19drm/amd/display: Fix a bug when searching for insert_above_mpccWesley Chalmers1-2/+3
commit 3d028d5d60d516c536de1ddd3ebf3d55f3f8983b upstream. [WHY] Currently, when insert_plane is called with insert_above_mpcc parameter that is equal to tree->opp_list, the function returns NULL. [HOW] Instead, the function should insert the plane at the top of the tree. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Jun Lei <jun.lei@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Wesley Chalmers <wesley.chalmers@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-09-19drm/amd/display: Remove wait while lockedGabe Teeger3-28/+42
commit 5a3ccb1400339268c5e3dc1fa044a7f6c7f59a02 upstream. [Why] We wait for mpc idle while in a locked state, leading to potential deadlock. [What] Move the wait_for_idle call to outside of HW lock. This and a call to wait_drr_doublebuffer_pending_clear are moved added to a new static helper function called wait_for_outstanding_hw_updates, to make the interface clearer. Cc: stable@vger.kernel.org Fixes: 8f0d304d21b3 ("drm/amd/display: Do not commit pipe when updating DRR") Reviewed-by: Jun Lei <jun.lei@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Gabe Teeger <gabe.teeger@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-09-19drm/amd/display: always switch off ODM before committing more streamsWenjing Liu1-5/+5
commit 49a30c3d1a2258fc93cfe6eea8e4951dabadc824 upstream. ODM power optimization is only supported with single stream. When ODM power optimization is enabled, we might not have enough free pipes for enabling other stream. So when we are committing more than 1 stream we should first switch off ODM power optimization to make room for new stream and then allocating pipe resource for the new stream. Cc: stable@vger.kernel.org Fixes: 59de751e3845 ("drm/amd/display: add ODM case when looking for first split pipe") Reviewed-by: Dillon Varone <dillon.varone@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-09-19drm/amd/display: prevent potential division by zero errorsHamza Mahfooz1-3/+6
commit 07e388aab042774f284a2ad75a70a194517cdad4 upstream. There are two places in apply_below_the_range() where it's possible for a divide by zero error to occur. So, to fix this make sure the divisor is non-zero before attempting the computation in both cases. Cc: stable@vger.kernel.org Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2637 Fixes: a463b263032f ("drm/amd/display: Fix frames_to_insert math") Fixes: ded6119e825a ("drm/amd/display: Reinstate LFC optimization") Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-09-19drm/amd/display: enable cursor degamma for DCN3+ DRM legacy gammaMelissa Wen1-0/+7
commit 57a943ebfcdb4a97fbb409640234bdb44bfa1953 upstream. For DRM legacy gamma, AMD display manager applies implicit sRGB degamma using a pre-defined sRGB transfer function. It works fine for DCN2 family where degamma ROM and custom curves go to the same color block. But, on DCN3+, degamma is split into two blocks: degamma ROM for pre-defined TFs and `gamma correction` for user/custom curves and degamma ROM settings doesn't apply to cursor plane. To get DRM legacy gamma working as expected, enable cursor degamma ROM for implict sRGB degamma on HW with this configuration. Cc: stable@vger.kernel.org Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2803 Fixes: 96b020e2163f ("drm/amd/display: check attr flag before set cursor degamma on DCN3+") Signed-off-by: Melissa Wen <mwen@igalia.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-09-13Revert "drm/amd/display: Do not set drr on pipe commit"Michel Dänzer2-13/+0
commit 360930985ec9f394c82ba0b235403b4a366d1560 upstream. This reverts commit e101bf95ea87ccc03ac2f48dfc0757c6364ff3c7. Caused a regression: Samsung Odyssey Neo G9, running at 5120x1440@240/VRR, connected to Navi 21 via DisplayPort, blanks and the GPU hangs while starting the Steam game Assetto Corsa Competizione (via Proton 7.0). Example dmesg excerpt: amdgpu 0000:0c:00.0: [drm] ERROR [CRTC:82:crtc-0] flip_done timed out NMI watchdog: Watchdog detected hard LOCKUP on cpu 6 [...] RIP: 0010:amdgpu_device_rreg.part.0+0x2f/0xf0 [amdgpu] Code: 41 54 44 8d 24 b5 00 00 00 00 55 89 f5 53 48 89 fb 4c 3b a7 60 0b 00 00 73 6a 83 e2 02 74 29 4c 03 a3 68 0b 00 00 45 8b 24 24 <48> 8b 43 08 0f b7 70 3e 66 90 44 89 e0 5b 5d 41 5c 31 d2 31 c9 31 RSP: 0000:ffffb39a119dfb88 EFLAGS: 00000086 RAX: ffffffffc0eb96a0 RBX: ffff9e7963dc0000 RCX: 0000000000007fff RDX: 0000000000000000 RSI: 0000000000004ff6 RDI: ffff9e7963dc0000 RBP: 0000000000004ff6 R08: ffffb39a119dfc40 R09: 0000000000000010 R10: ffffb39a119dfc40 R11: ffffb39a119dfc44 R12: 00000000000e05ae R13: 0000000000000000 R14: ffff9e7963dc0010 R15: 0000000000000000 FS: 000000001012f6c0(0000) GS:ffff9e805eb80000(0000) knlGS:000000007fd40000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000461ca000 CR3: 00000002a8a20000 CR4: 0000000000350ee0 Call Trace: <TASK> dm_read_reg_func+0x37/0xc0 [amdgpu] generic_reg_get2+0x22/0x60 [amdgpu] optc1_get_crtc_scanoutpos+0x6a/0xc0 [amdgpu] dc_stream_get_scanoutpos+0x74/0x90 [amdgpu] dm_crtc_get_scanoutpos+0x82/0xf0 [amdgpu] amdgpu_display_get_crtc_scanoutpos+0x91/0x190 [amdgpu] ? dm_read_reg_func+0x37/0xc0 [amdgpu] amdgpu_get_vblank_counter_kms+0xb4/0x1a0 [amdgpu] dm_pflip_high_irq+0x213/0x2f0 [amdgpu] amdgpu_dm_irq_handler+0x8a/0x200 [amdgpu] amdgpu_irq_dispatch+0xd4/0x220 [amdgpu] amdgpu_ih_process+0x7f/0x110 [amdgpu] amdgpu_irq_handler+0x1f/0x70 [amdgpu] __handle_irq_event_percpu+0x46/0x1b0 handle_irq_event+0x34/0x80 handle_edge_irq+0x9f/0x240 __common_interrupt+0x66/0x110 common_interrupt+0x5c/0xd0 asm_common_interrupt+0x22/0x40 Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Michel Dänzer <mdaenzer@redhat.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-09-13drm/amd/display: Add smu write msg id fail retry processFudong Wang1-4/+16
commit 72105dcfa3d12b5af49311f857e3490baa225135 upstream. A benchmark stress test (12-40 machines x 48hours) found that DCN315 has cases where DC writes to an indirect register to set the smu clock msg id, but when we go to read the same indirect register the returned msg id doesn't match with what we just set it to. So, to fix this retry the write until the register's value matches with the requested value. Cc: stable@vger.kernel.org # 6.1+ Fixes: f94903996140 ("drm/amd/display: Add DCN315 CLK_MGR") Reviewed-by: Charlene Liu <charlene.liu@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Fudong Wang <fudong.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-09-13drm/amd/display: register edp_backlight_control() for DCN301Hamza Mahfooz1-0/+1
commit 1611917f39bee1abfc01501238db8ac19649042d upstream. As made mention of in commit 099303e9a9bd ("drm/amd/display: eDP intermittent black screen during PnP"), we need to turn off the display's backlight before powering off an eDP display. Not doing so will result in undefined behaviour according to the eDP spec. So, set DCN301's edp_backlight_control() function pointer to dce110_edp_backlight_control(). Cc: stable@vger.kernel.org Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2765 Fixes: 9c75891feef0 ("drm/amd/display: rework recent update PHY state commit") Suggested-by: Swapnil Patel <swapnil.patel@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-09-13drm/amd/display: Do not set drr on pipe commitWesley Chalmers2-0/+13
[ Upstream commit e101bf95ea87ccc03ac2f48dfc0757c6364ff3c7 ] [WHY] Writing to DRR registers such as OTG_V_TOTAL_MIN on the same frame as a pipe commit can cause underflow. [HOW] Move DMUB p-state delegate into optimze_bandwidth; enabling FAMS sets optimized_required. This change expects that Freesync requests are blocked when optimized_required is true. Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13drm/amd/display: ensure async flips are only accepted for fast updatesHamza Mahfooz2-15/+21
commit a7c0cad0dc060bb77e9c9d235d68441b0fc69507 upstream. We should be checking to see if async flips are supported in amdgpu_dm_atomic_check() (i.e. not dm_crtc_helper_atomic_check()). Also, async flipping isn't supported if a plane's framebuffer changes memory domains during an atomic commit. So, move the check from dm_crtc_helper_atomic_check() to amdgpu_dm_atomic_check() and check if the memory domain has changed in amdgpu_dm_atomic_check(). Cc: stable@vger.kernel.org Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2733 Fixes: c1e18c44dc7f ("drm/amd/display: only accept async flips for fast updates") Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-09-13drm/amd/display: Exit idle optimizations before attempt to access PHYLeo Chen1-0/+3
[ Upstream commit de612738e9771bd66aeb20044486c457c512f684 ] [Why & How] DMUB may hang when powering down pixel clocks due to no dprefclk. It is fixed by exiting idle optimization before the attempt to access PHY. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Leo Chen <sancchen@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13drm/amd/display: Guard DCN31 PHYD32CLK logic against chip familyGeorge Shen1-1/+2
[ Upstream commit 25b054c3c89cb6a7106a7982f0f70e83d0797dab ] [Why] Current yellow carp B0 PHYD32CLK logic is incorrectly applied to other ASICs. [How] Add guard to check chip family is yellow carp before applying logic. Reviewed-by: Hansen Dsouza <hansen.dsouza@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: George Shen <george.shen@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13Revert "Revert drm/amd/display: Enable Freesync Video Mode by default"Aurabindo Pillai1-7/+5
[ Upstream commit 11b92df8a2f7f4605ccc764ce6ae4a72760674df ] This reverts commit 4243c84aa082d8fba70c45f48eb2bb5c19799060. Enables freesync video by default, since the hang and corruption issue on eDP panels are now fixed. Acked-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Reviewed-by: Rodrigo Siqueira <rjordrigo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13Partially revert "drm/amd/display: Fix possible underflow for displays with ↵Daniel Miess1-1/+1
large vblank" [ Upstream commit a99a4ff6ef205d125002fc7e0857074e4e6597b6 ] This partially reverts commit de231189e7bf ("drm/amd/display: Fix possible underflow for displays with large vblank"). [Why] The increased value of VBlankNomDefaultUS causes underflow at the desktop of an IP KVM setup [How] Change the value from 800 back to 668 Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Jun Lei <jun.lei@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Daniel Miess <daniel.miess@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-08-23drm/amd/display: Implement workaround for writing to OTG_PIXEL_RATE_DIV registerSaaem Rizvi5-4/+29
commit 74fa4c81aadf418341f0d073c864ea7dca730a2e upstream. [Why and How] Current implementation requires FPGA builds to take a different code path from DCN32 to write to OTG_PIXEL_RATE_DIV. Now that we have a workaround to write to OTG_PIXEL_RATE_DIV register without blanking display on hotplug on DCN32, we can allow the code paths for FPGA to be exactly the same allowing for more consistent testing. Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Saaem Rizvi <SyedSaaem.Rizvi@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: "Limonciello, Mario" <mario.limonciello@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-23drm/amd/display: disable RCO for DCN314Daniel Miess2-1/+5
commit 85e41f1ed5d94a26fe4e57003c399936d291ed70 upstream. [Why] RCO is causing error messages on some DCN314 systems [How] Force disable RCO for DCN314 Fixes: 17fbdbda9cc8 ("drm/amd/display: Enable dcn314 DPP RCO") Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Daniel Miess <daniel.miess@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-23drm/amd/display: fix access hdcp_workqueue assertHersen Wu2-6/+16
[ Upstream commit cdff36a0217aadf5cbc167893ad1c0da869619cb ] [Why] hdcp are enabled for asics from raven. for old asics which hdcp are not enabled, hdcp_workqueue are null. some access to hdcp work queue are not guarded with pointer check. [How] add hdcp_workqueue pointer check before access workqueue. Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Hersen Wu <hersenxs.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-08-23drm/amd/display: phase3 mst hdcp for multiple displayshersen wu1-42/+141
[ Upstream commit e8fd3eeb5e8711af39b00642da06474e52f4780c ] [Why] multiple display hdcp are enabled within event_property_validate, event_property_update by looping all displays on mst hub. when one of display on mst hub in unplugged or disabled, hdcp are disabled for all displays on mst hub within hdcp_reset_display by looping all displays of mst link. for displays still active, their encryption status are off. kernel driver will not run hdcp authentication again. therefore, hdcp are not enabled automatically. [How] within is_content_protection_different, check drm_crtc_state changes of all displays on mst hub, if need, triger hdcp_update_display to re-run hdcp authentication. Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: hersen wu <hersenxs.wu@amd.com> Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Stable-dep-of: cdff36a0217a ("drm/amd/display: fix access hdcp_workqueue assert") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-08-23drm/amd/display: save restore hdcp state when display is unplugged from mst hubhersen wu3-1/+63
[ Upstream commit 82986fd631fa04bcedaefe11a6b3767601cbe84f ] [Why] connector hdcp properties are lost after display is unplgged from mst hub. connector is destroyed with dm_dp_mst_connector_destroy. when display is plugged back, hdcp is not desired and it wouldnt be enabled. [How] save hdcp properties into hdcp_work within amdgpu_dm_atomic_commit_tail. If the same display is plugged back with same display index, its hdcp properties will be retrieved from hdcp_work within dm_dp_mst_get_modes. Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: hersen wu <hersenxs.wu@amd.com> Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Stable-dep-of: cdff36a0217a ("drm/amd/display: fix access hdcp_workqueue assert") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-08-23drm/amd/display: Enable dcn314 DPP RCODaniel Miess1-0/+16
[ Upstream commit 17fbdbda9cc87ff5a013898de506212d25323ed7 ] [Why and How] Add back debug bits enabling RCO for dcn314 as underflow associated with this change has been resolved Acked-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Daniel Miess <daniel.miess@amd.com> Reviewed-by: Jun Lei <jun.lei@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-08-23drm/amd/display: Skip DPP DTO update if root clock is gatedNicholas Kazlauskas3-0/+14
[ Upstream commit 30f90f3c1c2c63c2fa44f61233737d27b72637c2 ] [Why] Hardware implements root clock gating by utilizing the DPP DTO registers with a special case of DTO enabled, phase = 0, modulo = 1. This conflicts with our policy to always update the DPPDTO for cases where it's expected to be disabled. The pipes unexpectedly enter a higher power state than expected because of this programming flow. [How] Guard the upper layers of HWSS against this hardware quirk with programming the register with an internal state flag in DCCG. While technically acting as global state for the DCCG, HWSS shouldn't be expected to understand the hardware quirk for having DTO disabled causing more power than DTO enabled with this specific setting. This also prevents sequencing errors from occuring in the future if we have to program DPP DTO in multiple locations. Acked-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Jun Lei <jun.lei@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-08-23drm/amd/display: Apply 60us prefetch for DCFCLK <= 300MhzAlvin Lee2-3/+3
[ Upstream commit 7e60ab4eb3e4ba2adac46d737fdbbc5732bebd58 ] [Description] - Previously we wanted to apply extra 60us of prefetch for min DCFCLK (200Mhz), but DCFCLK can be calculated to be 201Mhz which underflows also without the extra prefetch - Instead, apply the the extra 60us prefetch for any DCFCLK freq <= 300Mhz Reviewed-by: Nevenko Stupar <nevenko.stupar@amd.com> Reviewed-by: Jun Lei <jun.lei@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-08-16drm/amd/display: trigger timing sync only if TG is runningAurabindo Pillai1-0/+6
commit 6066aaf74f510fc171dbe9375153aee2d60d37aa upstream [Why&How] If the timing generator isnt running, it does not make sense to trigger a sync on the corresponding OTG. Check this condition before starting. Otherwise, this will cause error like: *ERROR* GSL: Timeout on reset trigger! Fixes: dc55b106ad47 ("drm/amd/display: Disable phantom OTG after enable for plane disable") Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> [ NOTE: This is also 5f9f97c02dd2 ("drm/amd/display: trigger timing sync only if TG is running") ] Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-16drm/amd/display: fix the build when DRM_AMD_DC_DCN is not setAlex Deucher1-1/+1
commit 5ca9b33ece9aa048b6ec9411f054e1b781662327 upstream Move the new callback outside of the guard. Fixes: dc55b106ad47 ("drm/amd/display: Disable phantom OTG after enable for plane disable") CC: Alvin Lee <Alvin.Lee2@amd.com> CC: Alan Liu <HaoPing.Liu@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-16drm/amd/display: Retain phantom plane/stream if validation failsAlvin Lee5-0/+40
commit 9b216b7e38f5381bcc3ad21c5ac614aa577ab8f2 upstream [Description] - If we fail validation, we should retain the phantom stream/planes - Full updates assume that phantom pipes will be fully removed, but if validation fails we keep the phantom pipes - Therefore we have to retain the plane/stream if validation fails (since the refcount is decremented before validation, and the expectation is that it's fully freed when the old dc_state is released) Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-16drm/amd/display: Disable phantom OTG after enable for plane disableAlvin Lee3-1/+22
commit dc55b106ad477c67f969f3432d9070c6846fb557 upstream [Description] - Need to disable phantom OTG after it's enabled in order to restore it to it's original state. - If it's enabled and then an MCLK switch comes in we may not prefetch the correct data since the phantom OTG could already be in the middle of the frame. Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Alan Liu <HaoPing.Liu@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-16drm/amd/display: Use update plane and stream routine for DCN32xRodrigo Siqueira1-0/+12
commit dddde627807c22d6f15f4417eb395b13a1ca88f9 upstream Sub-viewport (Subvp) feature is used for changing MCLK without causing any display artifact, requiring special treatment from the plane and stream perspective since DC needs to read data from the cache when using subvp. However, the function dc_commit_updates_for_stream does not provide all the support needed by this feature which will make this function legacy at some point. For this reason, this commit enables dc_update_planes_and_stream for ASICs that support this feature but preserves the old behavior for other ASICs. However, dc_update_planes_and_stream should replace dc_commit_updates_for_stream for all ASICs since it does most of the tasks executed by dc_commit_updates_for_stream with other extra operations, but we need to run tests before making this change. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Co-developed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-16drm/amd/display: Avoid ABM when ODM combine is enabled for eDPRodrigo Siqueira1-1/+11
commit 7fffb03b4045c862f904a88b852dc509c4e46406 upstream ODM to combine on the eDP panel with ABM causes the color difference to the panel since the ABM module only sets one pipe. Hence, this commit blocks ABM in case of ODM combined on eDP. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Co-developed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-16drm/amd/display: Update OTG instance in the commit streamRodrigo Siqueira1-0/+6
commit eef019eabc3cd0fddcffefbf67806a4d8cca29bb upstream OTG instance is not updated in dc_commit_state_no_check for newly committed streams because mode_change is not set. Notice that OTG update is part of the software state, and after hardware programming, it must be updated; for this reason, this commit updates the OTG offset right after hardware programming. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Co-developed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-16drm/amd/display: Handle seamless boot streamRodrigo Siqueira1-0/+15
commit 170390e587a69b2a24abac39eb3ae6ec28a4d7f2 upstream A seamless boot stream has hardware resources assigned to it, and adding a new stream means rebuilding the current assignment. It is desirable to avoid this situation since it may cause light-up issues on the VGA monitor on USB-C. This commit swaps the seamless boot stream to pipe 0 (if necessary) to ensure that the pipe context matches. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Co-developed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-16drm/amd/display: Add function for validate and update new streamRodrigo Siqueira3-14/+227
commit a5e39ae27c3a305c6aafc0e423b0cb2c677facde upstream DC stream can be seen as a representation of the DCN backend or the data struct that represents the center of the display pipeline. The front end (i.e., planes) is connected to the DC stream, and in its turn, streams are connected to the DC link. Due to this dynamic, DC must handle the following scenarios: 1. A stream is removed; 2. A new stream is created; 3. An unchanged stream had some updates on its planes. These combinations require that the new stream data struct become updated and has a valid global state. For handling multiple corner cases associated with stream operations, this commit introduces a function dedicated to manipulating stream changes and invokes the state validation function after that. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Co-developed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-16drm/amd/display: Handle virtual hardware detectRodrigo Siqueira1-0/+3
commit 987b96eb860036ab79051fb271f7fbdc01c9daf5 upstream If virtual hardware is detected, there is no reason to run the full dc_commit_streams process, and DC can return true immediately. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Co-developed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-16drm/amd/display: limit DPIA link rate to HBR3Peichen Huang1-0/+5
commit 0e69ef6ea82e8eece7d2b2b45a0da9670eaaefff upstream. [Why] DPIA doesn't support UHBR, driver should not enable UHBR for dp tunneling [How] limit DPIA link rate to HBR3 Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Acked-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Peichen Huang <peichen.huang@amd.com> Reviewed-by: Mustapha Ghaddar <Mustapha.Ghaddar@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-16drm/amd: Disable S/G for APUs when 64GB or more host memoryMario Limonciello1-3/+2
commit 08fffa74d9772d9538338be3f304006c94dde6f0 upstream. Users report a white flickering screen on multiple systems that is tied to having 64GB or more memory. When S/G is enabled pages will get pinned to both VRAM carve out and system RAM leading to this. Until it can be fixed properly, disable S/G when 64GB of memory or more is detected. This will force pages to be pinned into VRAM. This should fix white screen flickers but if VRAM pressure is encountered may lead to black screens. It's a trade-off for now. Fixes: 81d0bcf99009 ("drm/amdgpu: make display pinning more flexible (v2)") Cc: Hamza Mahfooz <Hamza.Mahfooz@amd.com> Cc: Roman Li <roman.li@amd.com> Cc: <stable@vger.kernel.org> # 6.1.y: bf0207e172703 ("drm/amdgpu: add S/G display parameter") Cc: <stable@vger.kernel.org> # 6.4.y Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2735 Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2354 Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-16drm/amdgpu: add S/G display parameterAlex Deucher1-0/+3
commit bf0207e1727031798f300afa17f9bbeceac6da87 upstream. Some users have reported flickerng with S/G display. We've tried extensively to reproduce and debug the issue on a wide variety of platform configurations (DRAM bandwidth, etc.) and a variety of monitors, but so far have not been able to. We disabled S/G display on a number of platforms to address this but that leads to failure to pin framebuffers errors and blank displays when there is memory pressure or no displays at all on systems with limited carveout (e.g., Chromebooks). Add a option to disable this as a debugging option as a way for users to disable this, depending on their use case, and for us to help debug this further. v2: fix typo Reviewed-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-16drm/amd/display: check attr flag before set cursor degamma on DCN3+Melissa Wen1-2/+5
commit 96b020e2163fb2197266b2f71b1007495206e6bb upstream. Don't set predefined degamma curve to cursor plane if the cursor attribute flag is not set. Applying a degamma curve to the cursor by default breaks userspace expectation. Checking the flag before performing any color transformation prevents too dark cursor gamma in DCN3+ on many Linux desktop environment (KDE Plasma, GNOME, wlroots-based, etc.) as reported at: - https://gitlab.freedesktop.org/drm/amd/-/issues/1513 This is the same approach followed by DCN2 drivers where the issue is not present. Fixes: 03f54d7d3448 ("drm/amd/display: Add DCN3 DPP") Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1513 Signed-off-by: Melissa Wen <mwen@igalia.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Tested-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-11drm/amd/display: skip CLEAR_PAYLOAD_ID_TABLE if device mst_en is 0Peichen Huang1-1/+4
commit a1c9a1e27022d13c70a14c4faeab6ce293ad043b upstream. [Why] Some dock and mst monitor don't like to receive CLEAR_PAYLOAD_ID_TABLE when mst_en is set to 0. It doesn't make sense to do so in source side, either. [How] Don't send CLEAR_PAYLOAD_ID_TABLE if mst_en is 0 Reviewed-by: George Shen <George.Shen@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Peichen Huang <PeiChen.Huang@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> [ 6.1.y doesn't have the file rename from 54618888d1ea7 ("drm/amd/display: break down dc_link.c") ] Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-11drm/amd/display: Ensure that planes are in the same orderRodrigo Siqueira1-0/+15
commit bb46a6a9bab134b9d15043ea8fa9d6c276e938b8 upstream. The function dc_update_planes_and_stream handles multiple cases where DC needs to remove and add planes in the commit tail phase. After Linux started to use this function, some of the IGT kms_plane started to fail; one good example to illustrate why the new sequence regressed IGT is the subtest plane-position-hole which has the following diagram as a template: +--------------------+ +-----------------------+ | +-----+ | | +-----+ | | | | | | | +-----+ | | | +--+ | ==> | | | | | | | |__| | | +-|---+ | | | | | +-----+ | | | | | +--------------------+ +-----------------------+ (a) Final image (b) Composed image IGT expects image (a) as the final result of two plane compositions as described in figure (b). After the migration to the new sequence, the last plane order is changed, and DC generates the following image: +---------------------+ | +-----+ | | | | | | | | | | +-----+ | | | +---------------------+ Notice that the generated image by DC is different because the small square that should be composed on top of the primary plane is below the primary plane. For this reason, the CRC will mismatch with the expected value. Since the function dc_add_all_planes_for_stream re-append all the new planes back to the dc_validation_set, this commit ensures that the original sequence is maintained. After this change, all CI tests in all ASICs start to pass again. Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Suggested-by: Melissa Wen <mwen@igalia.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-03drm/amd/display: Write to correct dirty_rectBenjamin Cheng1-3/+3
commit 751281c55579f0cb0e56c9797d4663f689909681 upstream. When FB_DAMAGE_CLIPS are provided in a non-MPO scenario, the loop does not use the counter i. This causes the fill_dc_dity_rect() to always fill dirty_rects[0], causing graphical artifacts when a damage clip aware DRM client sends more than 1 damage clip. Instead, use the flip_addrs->dirty_rect_count which is incremented by fill_dc_dirty_rect() on a successful fill. Fixes: 30ebe41582d1 ("drm/amd/display: add FB_DAMAGE_CLIPS support") Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2453 Signed-off-by: Benjamin Cheng <ben@bcheng.me> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.1.x Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-03drm/amd/display: perform a bounds check before filling dirty rectanglesHamza Mahfooz1-9/+4
commit af22d6a869cc26b519bfdcd54293c53f2e491870 upstream. Currently, it is possible for us to access memory that we shouldn't. Since, we acquire (possibly dangling) pointers to dirty rectangles before doing a bounds check to make sure we can actually accommodate the number of dirty rectangles userspace has requested to fill. This issue is especially evident if a compositor requests both MPO and damage clips at the same time, in which case I have observed a soft-hang. So, to avoid this issue, perform the bounds check before filling a single dirty rectangle and WARN() about it, if it is ever attempted in fill_dc_dirty_rect(). Cc: stable@vger.kernel.org # 6.1+ Fixes: 30ebe41582d1 ("drm/amd/display: add FB_DAMAGE_CLIPS support") Reviewed-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-03drm/amd/display: set per pipe dppclk to 0 when dpp is offDmytro Laktyushkin2-1/+7
commit 6609141c49df1b86fbad26a8643d4b4044f28b11 upstream. The 'commit 52e4fdf09ebc ("drm/amd/display: use low clocks for no plane configs")' introduced a change that set low clock values for DCN31 and DCN32. As a result of these changes, DC started to spam the log with the following warning: ------------[ cut here ]------------ WARNING: CPU: 8 PID: 1486 at drivers/gpu/drm/amd/amdgpu/../display/dc/dcn20/dcn20_dccg.c:58 dccg2_update_dpp_dto+0x3f/0xf0 [amdgpu] [..] CPU: 8 PID: 1486 Comm: kms_atomic Tainted: G W 5.18.0+ #1 RIP: 0010:dccg2_update_dpp_dto+0x3f/0xf0 [amdgpu] RSP: 0018:ffffbbd8025334d0 EFLAGS: 00010206 RAX: 00000000000001ee RBX: ffffa02c87dd3de0 RCX: 00000000000a7f80 RDX: 000000000007dec3 RSI: 0000000000000000 RDI: ffffa02c87dd3de0 RBP: ffffbbd8025334e8 R08: 0000000000000001 R09: 0000000000000005 R10: 00000000000331a0 R11: ffffffffc0b03d80 R12: ffffa02ca576d000 R13: ffffa02cd02c0000 R14: 00000000001453bc R15: ffffa02cdc280000 [..] dcn20_update_clocks_update_dpp_dto+0x4e/0xa0 [amdgpu] dcn32_update_clocks+0x5d9/0x650 [amdgpu] dcn20_prepare_bandwidth+0x49/0x100 [amdgpu] dcn30_prepare_bandwidth+0x63/0x80 [amdgpu] dc_commit_state_no_check+0x39d/0x13e0 [amdgpu] dc_commit_streams+0x1f9/0x3b0 [amdgpu] dc_commit_state+0x37/0x120 [amdgpu] amdgpu_dm_atomic_commit_tail+0x5e5/0x2520 [amdgpu] ? _raw_spin_unlock_irqrestore+0x1f/0x40 ? down_trylock+0x2c/0x40 ? vprintk_emit+0x186/0x2c0 ? vprintk_default+0x1d/0x20 ? vprintk+0x4e/0x60 We can easily trigger this issue by using a 4k@120 or a 2k@165 and running some of the kms_atomic tests. This warning is triggered because the per-pipe clock update is not happening; this commit fixes this issue by ensuring that DPPCLK is updated when calculating the watermark and dlg is invoked. Fixes: 2641c7b78081 ("drm/amd/display: use low clocks for no plane configs") Reported-by: Mark Broadworth <mark.broadworth@amd.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2026-05-13 04:48:44 +0300