summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd/display
AgeCommit message (Collapse)AuthorFilesLines
2021-01-27drm/amd/display: disable dcn10 pipe split by defaultLi, Roman1-2/+2
[ Upstream commit 9d03bb102028b4a3f4a64d6069b219e2e1c1f306 ] [Why] The initial purpose of dcn10 pipe split is to support some high bandwidth mode which requires dispclk greater than max dispclk. By initial bring up power measurement data, it showed power consumption is less with pipe split for dcn block. This could be reason for enable pipe split by default. By battery life measurement of some Chromebooks, result shows battery life is longer with pipe split disabled. [How] Disable pipe split by default. Pipe split could be still enabled when required dispclk is greater than max dispclk. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Hersen Wu <hersenxs.wu@amd.com> Signed-off-by: Roman Li <Roman.Li@amd.com> Reviewed-by: Roman Li <Roman.Li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-01-27drm/amd/display: DCN2X Find Secondary Pipe properly in MPO + ODM CaseSung Lee1-3/+4
commit 348fe1ca5ccdca0f8c285e2ab99004fdcd531430 upstream. [WHY] Previously as MPO + ODM Combine was not supported, finding secondary pipes for each case was mutually exclusive. Now that both are supported at the same time, both cases should be taken into account when finding a secondary pipe. [HOW] If a secondary pipe cannot be found based on previous bottom pipe, search for a second pipe using next_odm_pipe instead. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Sung Lee <sung.lee@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Anson Jacob <anson.jacob@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 5.10.x Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-23drm/amdgpu/display: drop DCN support for aarch64Alex Deucher10-102/+32
commit c241ed2f0ea549c18cff62a3708b43846b84dae3 upstream. From Ard: "Simply disabling -mgeneral-regs-only left and right is risky, given that the standard AArch64 ABI permits the use of FP/SIMD registers anywhere, and GCC is known to use SIMD registers for spilling, and may invent other uses of the FP/SIMD register file that have nothing to do with the floating point code in question. Note that putting kernel_neon_begin() and kernel_neon_end() around the code that does use FP is not sufficient here, the problem is in all the other code that may be emitted with references to SIMD registers in it. So the only way to do this properly is to put all floating point code in a separate compilation unit, and only compile that unit with -mgeneral-regs-only." Disable support until the code can be properly refactored to support this properly on aarch64. Acked-by: Will Deacon <will@kernel.org> Reported-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> [ardb: backport to v5.10 by reverting c38d444e44badc55 instead] Acked-by: Alex Deucher <alexander.deucher@amd.com> # v5.10 backport Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-19drm/amd/display: fix sysfs amdgpu_current_backlight_pwm NULL pointer issueKevin Wang1-1/+6
[ Upstream commit a7b5d9dd57298333e6e9f4c167f01385d922bbfb ] fix NULL pointer issue when read sysfs amdgpu_current_backlight_pwm sysfs node. Call Trace: [ 248.273833] BUG: kernel NULL pointer dereference, address: 0000000000000130 [ 248.273930] #PF: supervisor read access in kernel mode [ 248.273993] #PF: error_code(0x0000) - not-present page [ 248.274054] PGD 0 P4D 0 [ 248.274092] Oops: 0000 [#1] SMP PTI [ 248.274138] CPU: 2 PID: 1377 Comm: cat Tainted: G OE 5.9.0-rc5-drm-next-5.9+ #1 [ 248.274233] Hardware name: System manufacturer System Product Name/Z170-A, BIOS 3802 03/15/2018 [ 248.274641] RIP: 0010:dc_link_get_backlight_level+0x5/0x70 [amdgpu] [ 248.274718] Code: 67 ff ff ff 41 b9 03 00 00 00 e9 45 ff ff ff d1 ea e9 55 ff ff ff 0f 1f 44 00 00 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 <48> 8b 87 30 01 00 00 48 8b 00 48 8b 88 88 03 00 00 48 8d 81 e8 01 [ 248.274919] RSP: 0018:ffffb5ad809b3df0 EFLAGS: 00010203 [ 248.274982] RAX: ffffa0f77d1c0010 RBX: ffffa0f793ae9168 RCX: 0000000000000001 [ 248.275064] RDX: ffffa0f79753db00 RSI: 0000000000000001 RDI: 0000000000000000 [ 248.275145] RBP: ffffb5ad809b3e00 R08: ffffb5ad809b3da0 R09: 0000000000000000 [ 248.275225] R10: ffffb5ad809b3e68 R11: 0000000000000000 R12: ffffa0f793ae9190 [ 248.275306] R13: ffffb5ad809b3ef0 R14: 0000000000000001 R15: ffffa0f793ae9168 [ 248.275388] FS: 00007f5f1ec4d540(0000) GS:ffffa0f79ec80000(0000) knlGS:0000000000000000 [ 248.275480] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 248.275547] CR2: 0000000000000130 CR3: 000000042a03c005 CR4: 00000000003706e0 [ 248.275628] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 248.275708] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 248.275789] Call Trace: [ 248.276124] ? current_backlight_read+0x24/0x40 [amdgpu] [ 248.276194] seq_read+0xc3/0x3f0 [ 248.276240] full_proxy_read+0x5c/0x90 [ 248.276290] vfs_read+0xa7/0x190 [ 248.276334] ksys_read+0xa7/0xe0 [ 248.276379] __x64_sys_read+0x1a/0x20 [ 248.276429] do_syscall_64+0x37/0x80 [ 248.276477] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 248.276538] RIP: 0033:0x7f5f1e75c191 [ 248.276585] Code: fe ff ff 48 8d 3d b7 9d 0a 00 48 83 ec 08 e8 46 4d 02 00 66 0f 1f 44 00 00 48 8d 05 71 07 2e 00 8b 00 85 c0 75 13 31 c0 0f 05 <48> 3d 00 f0 ff ff 77 57 f3 c3 0f 1f 44 00 00 41 54 55 49 89 d4 53Hw [ 248.276784] RSP: 002b:00007ffcb1fc3f38 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 [ 248.276872] RAX: ffffffffffffffda RBX: 0000000000020000 RCX: 00007f5f1e75c191 [ 248.276953] RDX: 0000000000020000 RSI: 00007f5f1ec2b000 RDI: 0000000000000003 [ 248.277034] RBP: 0000000000020000 R08: 00000000ffffffff R09: 0000000000000000 [ 248.277115] R10: 0000000000000022 R11: 0000000000000246 R12: 00007f5f1ec2b000 [ 248.277195] R13: 0000000000000003 R14: 00007f5f1ec2b00f R15: 0000000000020000 [ 248.277279] Modules linked in: amdgpu(OE) iommu_v2 gpu_sched ttm(OE) drm_kms_helper cec drm i2c_algo_bit fb_sys_fops syscopyarea sysfillrect sysimgblt rpcsec_gss_krb5 auth_rpcgss nfsv4 nfs lockd grace fscache nls_iso8859_1 snd_hda_codec_realtek snd_hda_codec_hdmi snd_hda_codec_generic ledtrig_audio intel_rapl_msr intel_rapl_common snd_hda_intel snd_intel_dspcfg x86_pkg_temp_thermal intel_powerclamp snd_hda_codec snd_hda_core snd_hwdep snd_pcm snd_seq_midi snd_seq_midi_event mei_hdcp coretemp snd_rawmidi snd_seq kvm_intel kvm snd_seq_device snd_timer irqbypass joydev snd input_leds soundcore crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel crypto_simd cryptd glue_helper rapl intel_cstate mac_hid mei_me serio_raw mei eeepc_wmi wmi_bmof asus_wmi mxm_wmi intel_wmi_thunderbolt acpi_pad sparse_keymap efi_pstore sch_fq_codel parport_pc ppdev lp parport sunrpc ip_tables x_tables autofs4 hid_logitech_hidpp hid_logitech_dj hid_generic usbhid hid e1000e psmouse ahci libahci wmi video [ 248.278211] CR2: 0000000000000130 [ 248.278221] ---[ end trace 1fbe72fe6f91091d ]--- [ 248.357226] RIP: 0010:dc_link_get_backlight_level+0x5/0x70 [amdgpu] [ 248.357272] Code: 67 ff ff ff 41 b9 03 00 00 00 e9 45 ff ff ff d1 ea e9 55 ff ff ff 0f 1f 44 00 00 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 <48> 8b 87 30 01 00 00 48 8b 00 48 8b 88 88 03 00 00 48 8d 81 e8 01 Signed-off-by: Kevin Wang <kevin1.wang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-01-19Revert "drm/amd/display: Fixed Intermittent blue screen on OLED panel"Rodrigo Siqueira1-5/+6
commit 4eec66c014e9a406d8d453de958f6791d05427e4 upstream. commit a861736dae64 ("drm/amd/display: Fixed Intermittent blue screen on OLED panel") causes power regression for many users. It seems that this change causes the MCLK to get forced high; this creates a regression for many users since their devices were not able to drop to a low state after this change. For this reason, this reverts commit a861736dae644a0d7abbca0c638ae6aad28feeb8. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1407 Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Naveed Ashfaq <Naveed.Ashfaq@amd.com> Cc: Hersen Wu <hersenxs.wu@amd.com> Cc: Roman Li <roman.li@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-09Revert "drm/amd/display: Fix memory leaks in S3 resume"Alex Deucher1-2/+1
This reverts commit a135a1b4c4db1f3b8cbed9676a40ede39feb3362. This leads to blank screens on some boards after replugging a display. Revert until we understand the root cause and can fix both the leak and the blank screen after replug. Cc: Stylon Wang <stylon.wang@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Cc: Andre Tomt <andre@tomt.net> Cc: Oleksandr Natalenko <oleksandr@natalenko.name> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-06drm/amd/display: updated wm table for RenoirJake Wang1-6/+6
[ Upstream commit 410066d24cfc1071be25e402510367aca9db5cb6 ] [Why] For certain timings, Renoir may underflow due to sr exit latency being too slow. [How] Updated wm table for renoir. Signed-off-by: Jake Wang <haonan.wang2@amd.com> Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-01-06drm/amd/display: Add get_dig_frontend implementation for DCExRodrigo Siqueira2-2/+44
commit 6bdeff12a96c9a5da95c8d11fefd145eb165e32a upstream. Some old ASICs might not implement/require get_dig_frontend helper; in this scenario, we can have a NULL pointer exception when we try to call it inside vbios disable operation. For example, this situation might happen when using Polaris12 with an eDP panel. This commit avoids this situation by adding a specific get_dig_frontend implementation for DCEx. Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Harry Wentland <Harry.Wentland@amd.com> Cc: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Cc: Chiawen Huang <chiawen.huang@amd.com> Reported-and-tested-by: Borislav Petkov <bp@suse.de> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-30drm/amd/display: Fix memory leaks in S3 resumeStylon Wang1-1/+2
commit a135a1b4c4db1f3b8cbed9676a40ede39feb3362 upstream. EDID parsing in S3 resume pushes new display modes to probed_modes list but doesn't consolidate to actual mode list. This creates a race condition when amdgpu_dm_connector_ddc_get_modes() re-initializes the list head without walking the list and results in memory leak. Bug: https://bugzilla.kernel.org/show_bug.cgi?id=209987 Acked-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-30drm/amdgpu: fix build_coefficients() argumentArnd Bergmann1-1/+1
[ Upstream commit dbb60031dd0c2b85f10ce4c12ae604c28d3aaca4 ] gcc -Wextra warns about a function taking an enum argument being called with a bool: drivers/gpu/drm/amd/amdgpu/../display/modules/color/color_gamma.c: In function 'apply_degamma_for_user_regamma': drivers/gpu/drm/amd/amdgpu/../display/modules/color/color_gamma.c:1617:29: warning: implicit conversion from 'enum <anonymous>' to 'enum dc_transfer_func_predefined' [-Wenum-conversion] 1617 | build_coefficients(&coeff, true); It appears that a patch was added using the old calling conventions after the type was changed, and the value should actually be 0 (TRANSFER_FUNCTION_SRGB) here instead of 1 (true). Fixes: 55a01d4023ce ("drm/amd/display: Add user_regamma to color module") Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-30drm/amdgpu: fix incorrect enum typeArnd Bergmann1-2/+2
[ Upstream commit a110f3750bf8b93764f13bd1402c7cba03d15d61 ] core_link_write_dpcd() returns enum dc_status, not ddc_result: display/dc/core/dc_link_dp.c: In function 'dp_set_panel_mode': display/dc/core/dc_link_dp.c:4237:11: warning: implicit conversion from 'enum dc_status' to 'enum ddc_result' [-Wenum-conversion] Avoid the warning by using the correct enum in the caller. Fixes: 0b226322434c ("drm/amd/display: Synchronous DisplayPort Link Training") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-09drm/amd/display: Add wm table for RenoirSung Lee1-4/+89
[Why] Without additional HostVM Latency, Renoir takes 2us longer to exit self-refresh. This causes underflow in certain cases. [How] Add table for Renoir with updated sr exit latencies for WM set A. Signed-off-by: Sung Lee <sung.lee@amd.com> Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com> Reviewed-by: Roman Li <Roman.Li@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-09drm/amd/display: Prevent bandwidth overflowChris Park1-2/+5
[Why] At very high pixel clock, bandwidth calculation exceeds 32 bit size and overflow value. This causes the resulting selection of link rate to be inaccurate. [How] Change order of operation and use fixed point to deal with integer accuracy. Also address bug found when forcing link rate. Signed-off-by: Chris Park <Chris.Park@amd.com> Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-09drm/amdgpu/disply: set num_crtc earlierAlex Deucher1-5/+4
To avoid a recently added warning: Bogus possible_crtcs: [ENCODER:65:TMDS-65] possible_crtcs=0xf (full crtc mask=0x7) WARNING: CPU: 3 PID: 439 at drivers/gpu/drm/drm_mode_config.c:617 drm_mode_config_validate+0x178/0x200 [drm] In this case the warning is harmless, but confusing to users. Fixes: 0df108237433 ("drm: Validate encoder->possible_crtcs") Bug: https://bugzilla.kernel.org/show_bug.cgi?id=209123 Reviewed-by: Daniel Vetter <daniel@ffwll.ch> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2020-12-03drm/amd/display: Init clock value by current vbios CLKsBrandon Syu1-2/+11
[Why] While booting into OS, driver updates DPP/DISP CLKs. But init clock value is zero which is invalid. [How] Get current clocks value to update init clocks. To avoid underflow. Signed-off-by: Brandon Syu <Brandon.Syu@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-11-24drm/amd/display: Avoid HDCP initialization in devices without outputRodrigo Siqueira1-1/+1
The HDCP feature requires at least one connector attached to the device; however, some GPUs do not have a physical output, making the HDCP initialization irrelevant. This patch disables HDCP initialization when the graphic card does not have output. Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2020-11-18drm/amd/display: Always get CRTC updated constant values inside commit tailRodrigo Siqueira1-1/+2
We recently improved our display atomic commit and tail sequence to avoid some issues related to concurrency. One of the major changes consisted of moving the interrupt disable and the stream release from our atomic commit to our atomic tail (commit 6d90a208cfff ("drm/amd/display: Move disable interrupt into commit tail")) . However, the new code introduced inside our commit tail function was inserted right after the function drm_atomic_helper_update_legacy_modeset_state(), which has routines for updating internal data structs related to timestamps. As a result, in certain conditions, the display module can reach a situation where we update our constants and, after that, clean it. This situation generates the following warning: amdgpu 0000:03:00.0: drm_WARN_ON_ONCE(drm_drv_uses_atomic_modeset(dev)) WARNING: CPU: 6 PID: 1269 at drivers/gpu/drm/drm_vblank.c:722 drm_crtc_vblank_helper_get_vblank_timestamp_internal+0x32b/0x340 [drm] ... RIP: 0010:drm_crtc_vblank_helper_get_vblank_timestamp_internal+0x32b/0x340 [drm] ... Call Trace: ? dc_stream_get_vblank_counter+0x57/0x60 [amdgpu] drm_crtc_vblank_helper_get_vblank_timestamp+0x1c/0x20 [drm] drm_get_last_vbltimestamp+0xad/0xc0 [drm] drm_reset_vblank_timestamp+0x63/0xd0 [drm] drm_crtc_vblank_on+0x85/0x150 [drm] amdgpu_dm_atomic_commit_tail+0xaf1/0x2330 [amdgpu] commit_tail+0x99/0x130 [drm_kms_helper] drm_atomic_helper_commit+0x123/0x150 [drm_kms_helper] amdgpu_dm_atomic_commit+0x11/0x20 [amdgpu] drm_atomic_commit+0x4a/0x50 [drm] drm_atomic_helper_set_config+0x7c/0xc0 [drm_kms_helper] drm_mode_setcrtc+0x20b/0x7e0 [drm] ? tomoyo_path_number_perm+0x6f/0x200 ? drm_mode_getcrtc+0x190/0x190 [drm] drm_ioctl_kernel+0xae/0xf0 [drm] drm_ioctl+0x245/0x400 [drm] ? drm_mode_getcrtc+0x190/0x190 [drm] amdgpu_drm_ioctl+0x4e/0x80 [amdgpu] __x64_sys_ioctl+0x91/0xc0 do_syscall_64+0x38/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 ... For fixing this issue we rely upon a refactor introduced on drm_atomic_helper_update_legacy_modeset_state ("Remove the timestamping constant update from drm_atomic_helper_update_legacy_modeset_state()") which decouples constant values update from drm_atomic_helper_update_legacy_modeset_state to a new helper. Basically, this commit uses this new helper and place it right after our release module to avoid a situation where our CRTC struct gets wrong values. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1373 Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1349 Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-11-16drm/amd/display: Add missing pflip irq for dcn2.0Alex Deucher1-2/+2
If we have more than 4 displays we will run into dummy irq calls or flip timout issues. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2020-11-13Merge tag 'amd-drm-fixes-5.10-2020-11-12' of ↵Dave Airlie1-2/+2
git://people.freedesktop.org/~agd5f/linux into drm-fixes amd-drm-fixes-5.10-2020-11-12: amdgpu: - Pageflip fix for DCN3 - Declare TA firmware for green sardine - Headless navi fix Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201113055512.3963-1-alexander.deucher@amd.com
2020-11-06Merge tag 'drm-fixes-2020-11-06-1' of git://anongit.freedesktop.org/drm/drmLinus Torvalds4-0/+17
Pull drm fixes from Dave Airlie: "It's Friday here so that means another installment of drm fixes to distract you from the counting process. Changes all over the place, the amdgpu changes contain support for a new GPU that is close to current one already in the tree (Green Sardine) so it shouldn't have much side effects. Otherwise imx has a few cleanup patches and fixes, amdgpu and i915 have around the usual smattering of fixes, fonts got constified, and vc4/panfrost has some minor fixes. All in all a fairly regular rc3. We have an outstanding nouveau regression, but the author is looking into the fix, so should be here next week. I now return you to counting. fonts: - constify font structures. MAINTAINERS: - Fix path for amdgpu power management amdgpu: - Add support for more navi1x SKUs - Fix for suspend on CI dGPUs - VCN DPG fix for Picasso - Sienna Cichlid fixes - Polaris DPM fix - Add support for Green Sardine amdkfd: - Fix an allocation failure check i915: - Fix set domain's cache coherency - Fixes around breadcrumbs - Fix encoder lookup during PSR atomic - Hold onto an explicit ref to i915_vma_work.pinned - gvt: HWSP reset handling fix - gvt: flush workaround - gvt: vGPU context pin/unpin - gvt: mmio cmd access fix for bxt/apl imx: - drop unused functions and callbacks - reuse imx_drm_encoder_parse_of - spinlock rework - memory leak fix - minor cleanups vc4: - resource cleanup fix panfrost: - madvise/shrinker fix" * tag 'drm-fixes-2020-11-06-1' of git://anongit.freedesktop.org/drm/drm: (55 commits) drm/amdgpu/display: remove DRM_AMD_DC_GREEN_SARDINE drm/amd/display: Add green_sardine support to DM drm/amd/display: Add green_sardine support to DC drm/amdgpu: enable vcn support for green_sardine (v2) drm/amdgpu: enable green_sardine_asd.bin loading (v2) drm/amdgpu/sdma: add sdma engine support for green_sardine (v2) drm/amdgpu: add gfx support for green_sardine (v2) drm/amdgpu: add soc15 common ip block support for green_sardine (v3) drm/amdgpu: add green_sardine support for gpu_info and ip block setting (v2) drm/amdgpu: add Green_Sardine APU flag drm/amdgpu: resolved ASD loading issue on sienna amdkfd: Check kvmalloc return before memcpy drm/amdgpu: update golden setting for sienna_cichlid amd/amdgpu: Disable VCN DPG mode for Picasso drm/amdgpu/swsmu: remove duplicate call to smu_set_default_dpm_table drm/i915: Hold onto an explicit ref to i915_vma_work.pinned drm/i915/gt: Flush xcs before tgl breadcrumbs drm/i915/gt: Expose more parameters for emitting writes into the ring drm/i915: Fix encoder lookup during PSR atomic check drm/i915/gt: Use the local HWSP offset during submission ...
2020-11-06drm/amd/display: Add missing pflip irqBhawanpreet Lakha1-2/+2
If we have more than 4 displays we will run into dummy irq calls or flip timout issues. Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 5.9.x
2020-11-04drm/amdgpu/display: remove DRM_AMD_DC_GREEN_SARDINEAlex Deucher5-20/+0
No need for a separate config option at this point. Reviewed-by: Luben Tuikov <luben.tuikov@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-11-04drm/amd/display: Add green_sardine support to DMRoman Li1-0/+12
Display Manager support for green_sardine Signed-off-by: Roman Li <Roman.Li@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-11-04drm/amd/display: Add green_sardine support to DCRoman Li4-0/+25
Display Core support for green_sardine Signed-off-by: Roman Li <Roman.Li@amd.com> Acked-by: Hersen Wu <hersenxs.wu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-11-04Merge tag 'docs-5.10-warnings' of git://git.lwn.net/linuxLinus Torvalds2-4/+4
Pull documentation build warning fixes from Jonathan Corbet: "This contains a series of warning fixes from Mauro; once applied, the number of warnings from the once-noisy docs build process is nearly zero. Getting to this point has required a lot of work; once there, hopefully we can keep things that way. I have packaged this as a separate pull because it does a fair amount of reaching outside of Documentation/. The changes are all in comments and in code placement. It's all been in linux-next since last week" * tag 'docs-5.10-warnings' of git://git.lwn.net/linux: (24 commits) docs: SafeSetID: fix a warning amdgpu: fix a few kernel-doc markup issues selftests: kselftest_harness.h: fix kernel-doc markups drm: amdgpu_dm: fix a typo gpu: docs: amdgpu.rst: get rid of wrong kernel-doc markups drm: amdgpu: kernel-doc: update some adev parameters docs: fs: api-summary.rst: get rid of kernel-doc include IB/srpt: docs: add a description for cq_size member locking/refcount: move kernel-doc markups to the proper place docs: lockdep-design: fix some warning issues MAINTAINERS: fix broken doc refs due to yaml conversion ice: docs fix a devlink info that broke a table crypto: sun8x-ce*: update entries to its documentation net: phy: remove kernel-doc duplication mm: pagemap.h: fix two kernel-doc markups blk-mq: docs: add kernel-doc description for a new struct member docs: userspace-api: add iommu.rst to the index file docs: hwmon: mp2975.rst: address some html build warnings docs: net: statistics.rst: remove a duplicated kernel-doc docs: kasan.rst: add two missing blank lines ...
2020-10-28drm: amdgpu_dm: fix a typoMauro Carvalho Chehab2-4/+4
dm_comressor_info -> dm_compressor_info The kernel-doc markup is right, but the struct itself and their references contain a typo. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/9de495fa791596609eb2e73ba71cea99e09b2689.1603791716.git.mchehab+huawei@kernel.org Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2020-10-27drm/amd/display: Clean up debug macrosTakashi Iwai2-21/+13
This patch simplifies the ASSERT*() and BREAK_TO_DEBUGGER() macros: - Move the dependency check of CONFIG_KGDB into Kconfig - Unify the kgdb_breakpoint() call - Drop the non-existing CONFIG_HAVE_KGDB Also align the behavior of ASSERT() macro in both cases with and without CONFIG_DEBUG_KERNEL_DC. Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-10-27drm/amd/display: Don't invoke kgdb_breakpoint() unconditionallyTakashi Iwai1-1/+1
ASSERT_CRITICAL() invokes kgdb_breakpoint() whenever either CONFIG_KGDB or CONFIG_HAVE_KGDB is set. This, however, may lead to a kernel panic when no kdb stuff is attached, since the kgdb_breakpoint() call issues INT3. It's nothing but a surprise for normal end-users. For avoiding the pitfall, make the kgdb_breakpoint() call only when CONFIG_DEBUG_KERNEL_DC is set. https://bugzilla.opensuse.org/show_bug.cgi?id=1177973 Cc: <stable@vger.kernel.org> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-10-27drm/amd/display: Fix kernel panic by dal_gpio_open() errorTakashi Iwai1-2/+2
Currently both error code paths handled in dal_gpio_open_ex() issues ASSERT_CRITICAL(), and this leads to a kernel panic unnecessarily if CONFIG_KGDB is enabled. Since basically both are non-critical errors and can be recovered, drop those assert calls and use a safer one, BREAK_TO_DEBUGGER(), for allowing the debugging, instead. BugLink: https://bugzilla.opensuse.org/show_bug.cgi?id=1177973 Cc: <stable@vger.kernel.org> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-10-27drm/amdgpu/display: use kvzalloc again in dc_create_stateAlex Deucher1-2/+2
It looks this was accidently lost in a follow up patch. dc context is large and we don't need contiguous pages. Fixes: e4863f118a7d ("drm/amd/display: Multi display cause system lag on mode change") Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: Aric Cyr <aric.cyr@amd.com> Cc: Alex Xu <alex_y_xu@yahoo.ca> Reported-by: Alex Xu (Hello71) <alex_y_xu@yahoo.ca> Tested-by: Alex Xu (Hello71) <alex_y_xu@yahoo.ca> Cc: stable@vger.kernel.org
2020-10-27drm/amd/display: adding ddc_gpio_vga_reg_list to ddc reg def'nsMartin Leung1-0/+12
why: oem-related ddc read/write fails without these regs how: copy from hw_factory_dcn20.c Signed-off-by: Martin Leung <martin.leung@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-10-27drm/amd/display: prevent null pointer accessDmytro Laktyushkin1-5/+7
Prevent null pointer access when checking odm tree. Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: <stable@vger.kernel.org>
2020-10-27drm/amd/display: Fixed panic during seamless boot.David Galiffi1-1/+2
[why] get_pixel_clk_frequency_100hz is undefined in clock_source_funcs. [how] set function pointer: ".get_pixel_clk_frequency_100hz = get_pixel_clk_frequency_100hz" Signed-off-by: David Galiffi <David.Galiffi@amd.com> Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-10-22drm/amd/display: Avoid MST manager resource leak.Andrey Grodzovsky1-0/+7
On connector destruction call drm_dp_mst_topology_mgr_destroy to release resources allocated in drm_dp_mst_topology_mgr_init. Do it only if MST manager was initilized before otherwsie a crash is seen on driver unload/device unplug. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2020-10-22drm/amd/display: Revert "drm/amd/display: Fix a list corruption"Andrey Grodzovsky1-1/+0
This fixes regression on device unplug and/or driver unload. [ 65.681501 < 0.000004>] BUG: kernel NULL pointer dereference, address: 0000000000000008 [ 65.681504 < 0.000003>] #PF: supervisor write access in kernel mode [ 65.681506 < 0.000002>] #PF: error_code(0x0002) - not-present page [ 65.681507 < 0.000001>] PGD 7c9437067 P4D 7c9437067 PUD 7c9db7067 PMD 0 [ 65.681511 < 0.000004>] Oops: 0002 [#1] SMP NOPTI [ 65.681512 < 0.000001>] CPU: 8 PID: 127 Comm: kworker/8:1 Tainted: G W O 5.9.0-rc2-dev+ #59 [ 65.681514 < 0.000002>] Hardware name: System manufacturer System Product Name/PRIME X470-PRO, BIOS 4406 02/28/2019 [ 65.681525 < 0.000011>] Workqueue: events drm_connector_free_work_fn [drm] [ 65.681535 < 0.000010>] RIP: 0010:drm_atomic_private_obj_fini+0x11/0x60 [drm] [ 65.681537 < 0.000002>] Code: de 4c 89 e7 e8 70 f2 ba f8 48 8d 65 d8 5b 41 5c 41 5d 41 5e 41 5f 5d c3 90 0f 1f 44 00 00 48 8b 47 08 48 8b 17 55 48 89 e5 53 <48> 89 42 08 48 89 10 48 b8 00 01 00 00 00 00 ad de 48 89 fb 48 89 [ 65.681541 < 0.000004>] RSP: 0018:ffffa5fa805efdd8 EFLAGS: 00010246 [ 65.681542 < 0.000001>] RAX: 0000000000000000 RBX: ffff9a4b094654d8 RCX: 0000000000000000 [ 65.681544 < 0.000002>] RDX: 0000000000000000 RSI: ffffffffba197bc2 RDI: ffff9a4b094654d8 [ 65.681545 < 0.000001>] RBP: ffffa5fa805efde0 R08: ffffffffba197b82 R09: 0000000000000040 [ 65.681547 < 0.000002>] R10: ffffa5fa805efdc8 R11: 000000000000007f R12: ffff9a4b09465888 [ 65.681549 < 0.000002>] R13: ffff9a4b36f20010 R14: ffff9a4b36f20290 R15: ffff9a4b3a692840 [ 65.681551 < 0.000002>] FS: 0000000000000000(0000) GS:ffff9a4b3ea00000(0000) knlGS:0000000000000000 [ 65.681553 < 0.000002>] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 65.681554 < 0.000001>] CR2: 0000000000000008 CR3: 00000007c9c82000 CR4: 00000000003506e0 [ 65.681556 < 0.000002>] Call Trace: [ 65.681561 < 0.000005>] drm_dp_mst_topology_mgr_destroy+0xc4/0xe0 [drm_kms_helper] [ 65.681612 < 0.000051>] amdgpu_dm_connector_destroy+0x3d/0x110 [amdgpu] [ 65.681622 < 0.000010>] drm_connector_free_work_fn+0x78/0x90 [drm] [ 65.681624 < 0.000002>] process_one_work+0x164/0x410 [ 65.681626 < 0.000002>] worker_thread+0x4d/0x450 [ 65.681628 < 0.000002>] ? rescuer_thread+0x390/0x390 [ 65.681630 < 0.000002>] kthread+0x10a/0x140 [ 65.681632 < 0.000002>] ? kthread_unpark+0x70/0x70 [ 65.681634 < 0.000002>] ret_from_fork+0x22/0x30 This reverts commit 1545fbf97eafc1dbdc2923e58b4186b16a834784. Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2020-10-19drm/amd/display: Fix incorrect dsc force enable logicEryk Brol1-1/+1
[Why] Missed removing a '!' which results in incorrect behavior [How] Remove the offending '!' Signed-off-by: Eryk Brol <eryk.brol@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201015194053.355335-1-eryk.brol@amd.com
2020-10-19Merge tag 'amd-drm-fixes-5.10-2020-10-14' of ↵Dave Airlie2-5/+7
git://people.freedesktop.org/~agd5f/linux into drm-next amd-drm-fixes-5.10-2020-10-14: amdgpu: - eDP fix - BACO fix - Kernel documentation fixes - SMU7 mclk fix - VCN1 hw bug workaround amdkfd: - kvfree vs kfree fix Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201014195403.4558-1-alexander.deucher@amd.com
2020-10-14drm/amd/display: kernel-doc: document force_timing_syncMauro Carvalho Chehab1-0/+2
As warned when running "make htmldocs": ./drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h:345: warning: Function parameter or member 'force_timing_sync' not described in 'amdgpu_display_manager' This new struct member was not documented at kernel-doc markup. Fixes: 3d4e52d0cf24 ("drm/amd/display: Add debugfs for forcing stream timing sync") Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-10-14drm/amd/display: Fix module load hangs when connected to an eDPRodrigo Siqueira1-5/+5
It was recently introduced a change that enables driver to disable streams if pixel clock changes. Consequently, the code path executed in the disable vbios function expanded to an encoder verification part. The encoder loop is nested inside the pipe count loop, and both loops share the 'i' variable in control of their flow. This situation may lead to an infinite loop because the encoder loop constantly updates the `i` variable, making the first loop always positive. As a result, we can see a soft hang during the module load (modprobe amdgpu) and a series of dmesg log that looks like this: kernel:[ 124.538727] watchdog: BUG: soft lockup - CPU#2 stuck for 22s! [modprobe:1000] RSP: 0018:ffffabbf419bf0e8 EFLAGS: 00000282 RAX: ffffffffc0809de0 RBX: ffff93b35ccc0000 RCX: ffff93b366c21800 RDX: 0000000000000000 RSI: 0000000000000141 RDI: ffff93b35ccc0000 RBP: ffffabbf419bf108 R08: ffffabbf419bf164 R09: 0000000000000001 R10: 0000000000000003 R11: 0000000000000003 R12: 0000000008677d40 R13: 0000000000000141 R14: ffff93b35cfc0000 R15: ffff93b35abc0000 FS: 00007f1400717540(0000) GS:ffff93b37f680000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005649b66b0968 CR3: 00000003e0fec000 CR4: 0000000000350ee0 Call Trace: amdgpu_device_rreg+0x17/0x20 [amdgpu] amdgpu_cgs_read_register+0x14/0x20 [amdgpu] dm_read_reg_func+0x3a/0xb0 [amdgpu] get_pixel_clk_frequency_100hz+0x30/0x50 [amdgpu] dc_commit_state+0x8f1/0xae0 [amdgpu] ? drm_calc_timestamping_constants+0x101/0x160 [drm] amdgpu_dm_atomic_commit_tail+0x39d/0x21a0 [amdgpu] ? dcn21_validate_bandwidth+0xe5/0x290 [amdgpu] ? kfree+0xc3/0x390 ? dcn21_validate_bandwidth+0xe5/0x290 [amdgpu] ... RSP: 002b:00007fff26009bd8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 RAX: ffffffffffffffda RBX: 000055a8025bea50 RCX: 00007f140085c89d RDX: 0000000000000000 RSI: 000055a8025b8290 RDI: 000000000000000c RBP: 0000000000040000 R08: 0000000000000000 R09: 0000000000000000 R10: 000000000000000c R11: 0000000000000246 R12: 000055a8025b8290 R13: 0000000000000000 R14: 000055a8025bead0 R15: 000055a8025bea50 This issue was fixed by introducing a second variable for the internal loop. Fixes: 8353d30e747f4e ("drm/amd/display: disable stream if pixel clock changed with link active") Reviewed-by: Roman Li <Roman.Li@amd.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-10-12Merge tag 'amd-drm-fixes-5.10-2020-10-09' of ↵Dave Airlie36-132/+511
git://people.freedesktop.org/~agd5f/linux into drm-next amd-drm-fixes-5.10-2020-10-09: amdgpu: - Clean up indirect register access - Navy Flounder fixes - SMU11 AC/DC interrupt fixes - GPUVM alignment fix - Display fixes - Misc other fixes Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201009222810.4030-1-alexander.deucher@amd.com
2020-10-09drm/amd/display: Fix OPTC_DATA_FORMAT programmingDmytro Laktyushkin3-16/+11
This should be programmed with timing rather than with odm. Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-10-09drm/amd/display: Don't allow pstate if no support in blankAlvin Lee1-1/+1
[Why] We will hang if we report switch in VACTIVE but not in VBLANK and DPG_EN = 1 [How] Block switch in ACTIVE if not supported in BLANK Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-10-05drm/amd/display: HDMI remote sink need mode validation for LinuxFangzhi Zuo1-1/+1
[Why] Currently mode validation is bypassed if remote sink exists. That leads to mode set issue when a BW bottle neck exists in the link path, e.g., a DP-to-HDMI converter that only supports HDMI 1.4. Any invalid mode passed to Linux user space will cause the modeset failure due to limitation of Linux user space implementation. [How] Mode validation is skipped only if in edid override. For real remote sink, clock limit check should be done for HDMI remote sink. Have HDMI related remote sink going through mode validation to elimiate modes which pixel clock exceeds BW limitation. Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com> Reviewed-by: Hersen Wu <hersenxs.wu@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-10-05drm/amd/display: Change to correct unit on audio rateChris Park1-3/+2
[Why] Formula uses kHz in their formula while our driver operates with Hz. [How] Divide audio rate by 1000 on the initial variable that is entered into formula. Signed-off-by: Chris Park <Chris.Park@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Acked-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-10-05drm/amd/display: Avoid set zero in the requested clkRodrigo Siqueira1-2/+1
[Why] Sometimes CRTCs can be disabled due to display unplugging or temporarily transition in the userspace; in these circumstances, DCE tries to set the minimum clock threshold. When we have this situation, the function bw_calcs is invoked with number_of_displays set to zero, making DCE set dispclk_khz and sclk_khz to zero. For these reasons, we have seen some ATOM bios errors that look like: [drm:atom_op_jump [amdgpu]] *ERROR* atombios stuck in loop for more than 5secs aborting [drm:amdgpu_atom_execute_table_locked [amdgpu]] *ERROR* atombios stuck executing EA8A (len 761, WS 0, PS 0) @ 0xEABA [How] This error happens due to an attempt to optimize the bandwidth using the sclk, and the dispclk clock set to zero. Technically we handle this in the function dce112_set_clock, but we are not considering the case that this value is set to zero. This commit fixes this issue by ensuring that we never set a minimum value below the minimum clock threshold. Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-09-30drm/amd/display: add pipe reassignment prevention code to dcn3Dmytro Laktyushkin1-12/+49
Add code to gracefuly handle any pipe reassignment occuring on dcn3 hardware. This should only happen when new surfaces are used for an update rather than old ones updated. Fixes: 69fc1f4b976cea ("amd/drm/display: avoid dcn3 on flip opp change for slave pipes") Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-09-29drm/amd/display: remove duplicate call to rn_vbios_smu_get_smu_version()Dirk Gouders1-1/+0
Commit 78fe9f63947a2b ("drm/amd/display: Remove DISPCLK Limit Floor for Certain SMU Versions") added a call to rn_vbios_smu_get_smu_version() to set clk_mgr->smu_ver. That field is initialized prior to the if-statement, already. Fixes: 78fe9f63947a2b (drm/amd/display: Remove DISPCLK Limit Floor for Certain SMU Versions) Signed-off-by: Dirk Gouders <dirk@gouders.net> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Sung Lee <sung.lee@amd.com> Cc: Yongqiang Sun <yongqiang.sun@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-09-29drm/amd/display: make two symbols staticJason Yan1-2/+2
This addresses the following sparse warning: drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_hw_sequencer.c:2740:6: warning: symbol 'dce110_set_cursor_position' was not declared. Should it be static? drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_hw_sequencer.c:2785:6: warning: symbol 'dce110_set_cursor_attribute' was not declared. Should it be static? Reviewed-by: Harry Wentland <harry.wentland@amd.com> Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-09-29drm/amd/display: make get_color_space_type() staticJason Yan1-1/+1
This addresses the following sparse warning: drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_hw_sequencer.c:180:26: warning: symbol 'get_color_space_type' was not declared. Should it be static? Reviewed-by: Harry Wentland <harry.wentland@amd.com> Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-09-29amd/drm/display: avoid dcn3 on flip opp change for slave pipesDmytro Laktyushkin1-3/+40
At the moment on flip opp reassignment does not work in all cases for non root pipes. This change simply makes sure we prefer pipes not used previously when splitting in dcn3. Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Reviewed-by: Eric Bernstein <eric.bernstein@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-16 08:31:32 +0300