summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd/display/dc
AgeCommit message (Collapse)AuthorFilesLines
2024-03-20drm/amd/display: Comments adjustmentsRodrigo Siqueira1-2/+1
[Why & How] This commit just drop some old comments and update a typo in another one. Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amd/display: correct hostvm flagSherry Wang1-1/+1
[Why] Hostvm should be enabled/disabled accordding to the status of riommu_active, but hostvm always be disabled on DCN31 which causes underflow [How] Set correct hostvm flag on DCN31 Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Sherry Wang <Yao.Wang1@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amd/display: Remove legacy codeRodrigo Siqueira1-20/+0
[Why & How] Remove legacy code which is unnecessary. Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amd/display: Enable fast update for DCN314Rodrigo Siqueira1-0/+1
[Why & How] Enable legacy fast update for DCN314 Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amd/display: Move define to the proper headerRodrigo Siqueira2-1/+1
[Why & How] DCN3_16_MIN_COMPBUF_SIZE_KB is defined in the dcn316_resource.c file. This header fit better in the dcn31_fpu.h together with similar defines. Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amd/display: Add the MALL size in the fallback functionRodrigo Siqueira2-2/+5
[Why & How] If the driver has issues retrieving the MALL size for the specific hardware, it might fail since the current value is set to zero. This commit addresses this issue by adding a simple constant value to give the drive a chance to start. Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amd/display: Correct indentations and spacesAlex Hung5-31/+32
[Why & How] This fixes indentations and adjust spaces for better readability and code styles. Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amd/display: Delete duplicated function prototypesAlex Hung1-2/+1
[Why & How] dcn32_smu_transfer_wm_table_dram_2_smu is defined twice so one is removed. Also adjust prototype orders. Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amd/display: Enable 2to1 ODM policy for DCN35Rodrigo Siqueira1-1/+1
[Why & How] Enable 2to1 ODM policy for DCN35 Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amd/display: Revert "Set the power_down_on_boot function pointer to null"Ovidiu Bunea1-1/+1
This reverts commit 54d9490314af ("drm/amd/display: Set the power_down_on_boot function pointer to null") [why & how] This commit breaks S0i3 entry because DCN does not enter IPS2. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Charlene Liu <charlene.liu@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Ovidiu Bunea <ovidiu.bunea@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amd/display: Set the power_down_on_boot function pointer to nullMuhammad Ahmed1-1/+1
[WHY] Blackscreen hang @ PC EF000025 when trying to wake up from S0i3. DCN gets powered off due to dc_power_down_on_boot() being called after timeout. [HOW] Setting the power_down_on_boot function pointer to null since we don't expect the function to be called for APU. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Muhammad Ahmed <ahmed.ahmed@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amd/display: 3.2.275Aric Cyr1-1/+1
- Support long vblank feature - Add monitor patch for specific eDP - Init DPPCLK from SMU on dcn32 - Update odm when ODM combine is changed on an otg master pipe with no plane - Fix idle check for shared firmware state - Add guards for idle on reg read/write - Guard cursor idle reallow by DC debug option - Add debug counters to IPS exit prints - Add left edge pixel for YCbCr422/420 + ODM pipe split - Amend coasting vtotal for replay low hz - Refactor DPP into a component directory - Set the power_down_on_boot function pointer to null - Implement update_planes_and_stream_v3 sequence - Lock all enabled otg pipes even with no planes - Implement wait_for_odm_update_pending_complete - Add a dc_state NULL check in dc_state_release - Backup and restore only on full updates - Update DMUB flags and definitions - Return the correct HDCP error code - Add comments to v_total calculation and drop legacy TODO Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amd/display: Backup and restore only on full updatesAlvin Lee4-97/+100
[WHY & HOW] Since the backup and restore for plane and stream states has a significant amount of data to copy, we will change the backup and restore sequence to only take place during full updates. We will also move the scratch memory to struct dc instead of dc_state to avoid needing to allocate large amounts of memory every time we create a new DC state. Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amd/display: Implement update_planes_and_stream_v3 sequenceWenjing Liu1-232/+469
[WHY & HOW] Update planes and stream version 3 separates FULL and FAST updates to their own sequences. It aims to clean up frequent checks for update type resulting unnecessary branching in logic flow. It also adds a new commit minimal transition sequence, which detects the need for minimal transition based on the actual comparison of current and new states instead of "predicting" it based on per feature software policy, i.e. could_mpcc_tree_change_for_active_pipes. The new commit minimal transition sequence is made universal to any power saving features that would use extra free pipes such as Dynamic ODM/MPC Combine, MPO or SubVp. Therefore there is no longer a need to specially handle compatibility problems with transitions among those features as they are now transparent to the new sequence. Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amd/display: Update DMUB flags and definitionsAnthony Koo1-1/+1
[WHAT] - Update replay residency tracing design to support more types including tracking PHY and ALPM residency types - Add commands for Replay frame update count profiling - Enhance HWFQ with additional flags to allow for more optimized IPS low power state residencies - Add new flag to indicate if a new frame update needed for ABM to ramp up into steady state Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Anthony Koo <anthony.koo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amd/display: Refactor DPP into a component directoryRevalla Hari Krishna32-24/+127
[WHY & HOW] Move all dpp files to a new dpp directory. Reviewed-by: Martin Leung <martin.leung@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Revalla Hari Krishna <harikrishna.revalla@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amd/display: Add debug counters to IPS exit printsNicholas Kazlauskas1-3/+15
[WHY] To have a log of the entry/exit counters in case the system hangs to measure stability. [HOW] Read them from firmware state and pass them to the prints. Reviewed-by: Duncan Ma <duncan.ma@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amd/display: Guard cursor idle reallow by DC debug optionNicholas Kazlauskas1-2/+2
[WHY] To control whether idle optimizations reallowed after the first cursor update. [HOW] Add checks to the conditions. Reviewed-by: Duncan Ma <duncan.ma@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amd/display: Add guards for idle on reg read/writeNicholas Kazlauskas2-0/+10
[WHY] If DCN is in idle then we should not be accessing DCN registers or it can lead to hangs. [HOW] Log the error and return 0 or drop the write if it's in idle. This is skipped in the exit sequence itself since the boolean flips before it starts. It also does not cover accesses from external clients outside of DM/DC like firmware or the kernel mode driver. Reviewed-by: Duncan Ma <duncan.ma@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amd/display: Fix potential index out of bounds in color transformation ↵Srinivasan Shanmugam1-0/+5
function Fixes index out of bounds issue in the color transformation function. The issue could occur when the index 'i' exceeds the number of transfer function points (TRANSFER_FUNC_POINTS). The fix adds a check to ensure 'i' is within bounds before accessing the transfer function points. If 'i' is out of bounds, an error message is logged and the function returns false to indicate an error. Reported by smatch: drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_cm_common.c:405 cm_helper_translate_curve_to_hw_format() error: buffer overflow 'output_tf->tf_pts.red' 1025 <= s32max drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_cm_common.c:406 cm_helper_translate_curve_to_hw_format() error: buffer overflow 'output_tf->tf_pts.green' 1025 <= s32max drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_cm_common.c:407 cm_helper_translate_curve_to_hw_format() error: buffer overflow 'output_tf->tf_pts.blue' 1025 <= s32max Fixes: b629596072e5 ("drm/amd/display: Build unity lut for shaper") Cc: Vitaly Prosyak <vitaly.prosyak@amd.com> Cc: Charlene Liu <Charlene.Liu@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Roman Li <roman.li@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amd/display: Support long vblank featureRobin Chen11-4/+251
[WHY] We want to support low hz case, but the original vtotal/vtotal_min/vtotal_max can't support more than 0x7FFF. [HOW] We use the 2 HW reg to contorl long vblank case. 1. OTG_V_COUNT_STOP_CONTROL -> vcount_stop 2. OTG_V_COUNT_STOP_CONTROL2 -> vcount_stop_timer vcount_stop define from which line we stop using vcount and start using vcount2. vcount_stop_timer define how long we use vcount2. Ex: Vtotal = 7 OTG_V_COUNT_STOP_CONTROL = 4 OTG_V_COUNT_STOP_CONTROL2 = 5 time : 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11 vcount : 0, 1, 2, 3, - - - - - 4, 5, 6 vcount2 : 0, 1, 2, 3, 4, Reviewed-by: Jun Lei <jun.lei@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: ChunTao Tso <chuntao.tso@amd.com> Signed-off-by: Robin Chen<robin.chen@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amd/display: 3.2.274Aric Cyr1-1/+1
- Change default size for dummy plane in DML2 - Enable DML2 debug flags - Add some forward declarations - Add DML2 folder to include path - Set DCN351 BB and IP the same as DCN35 - Override min required DCFCLK in dml1_validate - Fix function banner for amdgpu_dm_psr_disable_all() - Allow dirty rects to be sent to dmub when abm is active - Add debug key to allow disabling dtbclk - Add debug prints for IPS testing - Exit idle optimizations before HDCP execution - Add entry and exit counters Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amd/display: Add debug prints for IPS testingNicholas Kazlauskas3-5/+85
[WHY] To log commit states and when we transition in/out of allow and idle states and the caller. [HOW] Add a new logging helper and wrap idle optimization calls to receive the caller. Reviewed-by: Duncan Ma <duncan.ma@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amd/display: Add debug key to allow disabling dtbclkMuhammad Ahmed2-1/+3
[HOW] Add debug key to allow disabling dtbclk Reviewed-by: Charlene Liu <charlene.liu@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Muhammad Ahmed <ahmed.ahmed@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amd/display: Add DML2 folder to include pathAurabindo Pillai1-0/+1
Add DML2 compilation rule in the Makefile. Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amd/display: Add some forward declarationsAurabindo Pillai1-0/+2
[WHAT] Add DML2 pipe and config struct forward declaration as a preparation for DML2. Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amd/display: Revert Add left edge pixel + ODM pipe splitGabe Teeger5-57/+0
This reverts commit e2fdd5c5257d ("drm/amd/display: Add left edge pixel for YCbCr422/420 + ODM pipe split") Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: George Shen <george.shen@amd.com> Reviewed-by: Charlene Liu <charlene.liu@amd.com> Reviewed-by: Jun Lei <jun.lei@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Gabe Teeger <gabe.teeger@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amd/display: Add left edge pixel for YCbCr422/420 + ODM pipe splitGeorge Shen5-0/+57
[WHY] Currently 3-tap chroma subsampling is used for YCbCr422/420. When ODM pipesplit is used, pixels on the left edge of ODM slices need one extra pixel from the right edge of the previous slice to calculate the correct chroma value. Without this change, the chroma value is slightly different than expected. This is usually imperceptible visually, but it impacts test pattern CRCs for compliance test automation. [HOW] Update logic to use the register for adding extra left edge pixel for YCbCr422/420 ODM cases. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: George Shen <george.shen@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amd/display: Fix noise issue on HDMI AV muteLeo Ma1-1/+11
[Why] When mode switching is triggered there is momentary noise visible on some HDMI TV or displays. [How] Wait for 2 frames to make sure we have enough time to send out AV mute and sink receives a full frame. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Leo Ma <hanghong.ma@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amd/display: Revert Remove pixle rate limit for subvpWenjing Liu1-0/+1
This reverts commit 340383c734f8 ("drm/amd/display: Remove pixle rate limit for subvp") [why] The original commit causes a regression when subvp is applied on ODM required 8k60hz timing. The display shows black screen on boot. The issue can be recovered with hotplug. It also causes MPO to fail. We will temprarily revert this commit and investigate the root cause further. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com> Reviewed-by: Martin Leung <martin.leung@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amd/display: Add a dc_state NULL check in dc_state_releaseAllen Pan1-1/+2
[How] Check wheather state is NULL before releasing it. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Charlene Liu <charlene.liu@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Allen Pan <allen.pan@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amd/display: Implement wait_for_odm_update_pending_completeWenjing Liu11-4/+90
[WHY] Odm update is doubled buffered. We need to wait for ODM update to be completed before optimizing bandwidth or programming new udpates. [HOW] implement wait_for_odm_update_pending_complete function to wait for: 1. odm configuration update is no longer pending in timing generator. 2. no pending dpg pattern update for each active OPP. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amd/display: Lock all enabled otg pipes even with no planesWenjing Liu3-1/+26
[WHY] On DCN32 we support dynamic ODM even when OTG is blanked. When ODM configuration is dynamically changed and the OTG is on blank pattern, we will need to reprogram OPP's test pattern based on new ODM configuration. Therefore we need to lock the OTG pipe to avoid temporary corruption when we are reprogramming OPP blank patterns. [HOW] Add a new interdependent update lock implementation to lock all enabled OTG pipes even when there is no plane on the OTG for DCN32. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amd/display: Amend coasting vtotal for replay low hzChunTao Tso4-8/+8
[WHY] The original coasting vtotal is 2 bytes, and it need to be amended to 4 bytes because low hz case. [HOW] Amend coasting vtotal from 2 bytes to 4 bytes. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: ChunTao Tso <chuntao.tso@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amd/display: Fix idle check for shared firmware stateNicholas Kazlauskas1-9/+3
[WHY] We still had an instance of get_idle_state checking the PMFW scratch register instead of the actual idle allow signal. [HOW] Replace it with the SW state check for whether we had allowed idle through notify_idle. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Duncan Ma <duncan.ma@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amd/display: Update odm when ODM combine is changed on an otg master ↵Wenjing Liu2-20/+28
pipe with no plane [WHY] When committing an update with ODM combine change when the plane is removing or already removed, we fail to detect odm change in pipe update flags. This has caused mismatch between new dc state and the actual hardware state, because we missed odm programming. [HOW] - Detect odm change even for otg master pipe without a plane. - Update odm config before calling program pipes for pipe with planes. The commit also updates blank pattern programming when odm is changed without plane. This is because number of OPP is changed when ODM combine is changed. Blank pattern is per OPP so we will need to reprogram OPP based on the new pipe topology. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Dillon Varone <dillon.varone@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amd/display: Init DPPCLK from SMU on dcn32Dillon Varone5-8/+41
[WHY & HOW] DPPCLK ranges should be obtained from the SMU when available. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Dillon Varone <dillon.varone@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amd/display: Allow dirty rects to be sent to dmub when abm is activeJosip Pavic1-0/+3
[WHY] It's beneficial for ABM to know when new frame data are available. [HOW] Add new condition to allow dirty rects to be sent to DMUB when ABM is active. ABM will use this as a signal that a new frame has arrived. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Anthony Koo <anthony.koo@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Josip Pavic <josip.pavic@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amd/display: Override min required DCFCLK in dml1_validateSohaib Nadeem3-0/+10
[WHY]: Increasing min DCFCLK addresses underflow issues that occur when phantom pipe is turned on for some Sub-Viewport configs [HOW]: dcn32_override_min_req_dcfclk is added to override DCFCLK value in dml1_validate when subviewport is being used. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Sohaib Nadeem <sohaib.nadeem@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amd/display: Change default size for dummy plane in DML2Swapnil Patel1-3/+15
[WHY & HOW] Currently, to map dc states into dml_display_cfg, We create a dummy plane if the stream doesn't have any planes attached to it. This dummy plane uses max addersable width height. This results in certain mode validations failing when they shouldn't. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Swapnil Patel <swapnil.patel@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-07drm/amd/display: Removed redundant @ symbol to fix kernel-doc warnings in ↵R SUNDAR1-4/+3
-next repo For linux-next repository. ./drivers/gpu/drm/amd/display/dc/inc/hw/hubp.h:1: warning: no structured comments found ./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:132: warning: Incorrect use of kernel-doc format: * @@overlap_only: Whether overlapping of different planes is allowed. ./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:132: warning: Incorrect use of kernel-doc format: * @@overlap_only: Whether overlapping of different planes is allowed. ./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:1: warning: no structured comments found ./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:132: warning: Incorrect use of kernel-doc format: * @@overlap_only: Whether overlapping of different planes is allowed. ./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:162: warning: Function parameter or struct member 'pre_multiplied_alpha' not described in 'mpcc_blnd_cfg' Signed-off-by: R SUNDAR <prosunofficial@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-04drm/amd/display: add DC changes for DCN351Hamza Mahfooz13-4/+2801
Add DC support for DCN 3.5.1. Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-04drm/amd/display: add DCN351 IRQ changesHamza Mahfooz3-1/+431
Add DCN3.5.1 interrupt support. Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-02-26drm/amd/display: Prevent potential buffer overflow in map_hw_resourcesSrinivasan Shanmugam1-0/+5
Adds a check in the map_hw_resources function to prevent a potential buffer overflow. The function was accessing arrays using an index that could potentially be greater than the size of the arrays, leading to a buffer overflow. Adds a check to ensure that the index is within the bounds of the arrays. If the index is out of bounds, an error message is printed and break it will continue execution with just ignoring extra data early to prevent the buffer overflow. Reported by smatch: drivers/gpu/drm/amd/amdgpu/../display/dc/dml2/dml2_wrapper.c:79 map_hw_resources() error: buffer overflow 'dml2->v20.scratch.dml_to_dc_pipe_mapping.disp_cfg_to_stream_id' 6 <= 7 drivers/gpu/drm/amd/amdgpu/../display/dc/dml2/dml2_wrapper.c:81 map_hw_resources() error: buffer overflow 'dml2->v20.scratch.dml_to_dc_pipe_mapping.disp_cfg_to_plane_id' 6 <= 7 Fixes: 7966f319c66d ("drm/amd/display: Introduce DML2") Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Roman Li <roman.li@amd.com> Cc: Qingqing Zhuo <Qingqing.Zhuo@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Suggested-by: Roman Li <roman.li@amd.com> Reviewed-by: Roman Li <roman.li@amd.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-02-22drm/amd/display: Use kcalloc() instead of kzalloc()Lenko Donchev1-1/+1
We are trying to get rid of all multiplications from allocation functions to prevent integer overflows. Here the multiplication is obviously safe, but using kcalloc() is more appropriate and improves readability. This patch has no effect on runtime behavior. Link: https://www.kernel.org/doc/html/next/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments Link: https://github.com/KSPP/linux/issues/162 Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Lenko Donchev <lenko.donchev@gmail.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-02-22drm/amd/display: 3.2.273Aric Cyr1-1/+1
This version brings along the following: - Re-enable windowed MPO support for DCN32/321 - Improvements in the subvp feature - Code clean up - USB4 fixes Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-02-22drm/amd/display: Drop unnecessary headerRodrigo Siqueira7-14/+0
A long time ago, the slab header was added to multiple files in DC. We also included it in the os_types.h, which is included in many of those DC files. At this point, there is no need to insert the slab.h header in multiple files, so this commit drops those includes. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-02-22drm/amd/display: reenable windowed mpo odm support on dcn32 and dcn321Wenjing Liu2-1/+2
[why] The feature was disabled due to regression found during testing. Now that all the pending issues are addressed, we are reenabling the power saving feature again. The feature optimizes dispclk level when user is using MPO capable broswers or watching MPO capable videos in windowed mode. The feature achieves power optimization by utilizing free pipes to process incoming pixels in parallel. So it reduces max dispclk requirements for each pipe. Previously ODM power optimization will be disabled when MPO plane is present due to technical challeges. This is mainly because ODM divides pixel workload with respect to stream but MPO plane position and size are arbitrary with respect to stream. The pixel processing workload of an MPO plane is not guarenteed to be evenly distributed across DCN pipes. For example if a plane is moved inside single ODM slice, all the processing for the plane is distributed to the pipe in the current ODM slice, while the other ODM slices don't need to process this plane. If the plane is then moved to the middle crosing two ODM slices, each ODM slice gets half of the workload. This is especially difficult when the plane itself has a large source rect which can't be processed by single DCN pipe. In this case we can't enable ODM power optimization when the plane is only within one ODM slice. [how] To overcome the challeges, new pipe resource management is in place to make sure a plane is validated with ODM power optimization support if it can be validated regardless of its position and the same pipe topology can be used regardless of the plane's position. When the plane is moved outside current ODM slice, we will set recout to 0 so the pipe can be idling without the need to update pipe topology. When the user resizes a plane, it may result in downscaling ratio changes. When the downscaling ratio is above single pipe's threshold, we will seamlessly exit ODM power optimization and applies MPC combine to support the plane. when downscaling ratio becomes smaller, we will seamlessly enter ODM power optimization again. All these pipe transitions happen automatically and quietly when the conditions are met without any visual impacts to the user. Reviewed-by: Martin Leung <martin.leung@amd.com> Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-02-22drm/amd/display: Remove pixle rate limit for subvpAlvin Lee1-1/+0
Subvp bugs related to 8K60 have been fixed, so remove the limit that blocks 8K60 timings from enabling SubVP. Reviewed-by: Nevenko Stupar <nevenko.stupar@amd.com> Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com> Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-02-22drm/amd/display: Only log during optimize_bandwidth callEthan Bitnun1-1/+1
Prevent logs during a prepare_bandwidth call to ensure log accuracy. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Ethan Bitnun <etbitnun@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.39.0) at 2026-05-23 13:23:19 +0300