summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd/display/dc
AgeCommit message (Collapse)AuthorFilesLines
2024-04-10drm/amd/display: fix an incorrect ODM policy assigned for subvpWenjing Liu1-13/+15
[why] When Subvp pipe's index is smaller than main pipe's index, the main pipe's ODM policy is not yet assigned. If we assign subvp pipe's ODM policy based on main pipe, we will assign uninitialized ODM policy. [how] Instead of copying main pipe's policy we copy the main pipe ODM policy logic. So it doesn't matter whether if main pipe's ODM policy is set, phantom pipe will always have the same policy because it running the same calcualtion to derive ODM policy. Cc: stable@vger.kernel.org Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-10drm/amd/display: always reset ODM mode in context when adding first planeWenjing Liu1-0/+9
[why] In current implemenation ODM mode is only reset when the last plane is removed from dc state. For any dc validate we will always remove all current planes and add new planes. However when switching from no planes to 1 plane, ODM mode is not reset because no planes get removed. This has caused an issue where we kept ODM combine when it should have been remove when a plane is added. The change is to reset ODM mode when adding the first plane. Cc: stable@vger.kernel.org Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-10drm/amd/display: Add option to configure mapping policy for edp0 on dp1Lewis Huang2-1/+9
[Why] We want flexibility to choose how pwrseq instance is mapped to eDP panel [How] Add configuration option to choose the pwrseq mapping policy. When enabled, allow fixed mapping between DIG inst to pwrseq inst. Reviewed-by: Anthony Koo <anthony.koo@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Lewis Huang <lewis.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-10drm/amd/display: Add missing parameter desc in dc_commit_streamsSrinivasan Shanmugam1-2/+1
This commit removes the lines that describe the 'streams' and 'stream_count' parameters and adds a line to describe the 'params' parameter, which was missing from the original comment block. Fixes the below with gcc W=1: drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:2138: warning: Function parameter or member 'params' not described in 'dc_commit_streams' drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:2138: warning: Excess function parameter 'streams' description in 'dc_commit_streams' drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:2138: warning: Excess function parameter 'stream_count' description in 'dc_commit_streams' Fixes: e779f4587f61 ("drm/amd/display: Add handling for DC power mode") Cc: Joshua Aberback <joshua.aberback@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Roman Li <roman.li@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-10drm/amd/display: Enable FGCG for DCN351Rodrigo Siqueira1-0/+2
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Acked-by: Roman Li <roman.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-10drm/amd/display: Add color logs for dcn20Rodrigo Siqueira1-0/+1
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Acked-by: Roman Li <roman.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-10drm/amd/display: Includes adjustmentsRodrigo Siqueira5-10/+1
This commit clean up some of the includes used by DCN. Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Acked-by: Roman Li <roman.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-10drm/amd/display: Add code comments clock and encode codeRodrigo Siqueira4-7/+16
This commit adds some comments to make easier to understand the clock update for DCN 201, the encode function, and other minor comments. Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Acked-by: Roman Li <roman.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-10drm/amd/display: Add WBSCL ram coefficient for writebackRodrigo Siqueira1-0/+11
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Acked-by: Roman Li <roman.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-10drm/amd/display: Fix MPCC DTN loggingEric Bernstein1-1/+1
[Why] DTN only logs 'pipe_count' instances of MPCC. However in some cases there are different number of MPCC than DPP (pipe_count). [How] Add mpcc_count parameter to resource_pool and set it during pool construction and use it for DTN logging of MPCC state. Signed-off-by: Eric Bernstein <eric.bernstein@amd.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Acked-by: Roman Li <roman.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-10drm/amd/display: Initialize debug variable dataRodrigo Siqueira1-1/+1
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Acked-by: Roman Li <roman.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-10drm/amd/display: Add missing SFB and OPP_SFRodrigo Siqueira2-0/+2
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Acked-by: Roman Li <roman.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-10drm/amd/display: Remove redundant RESERVE0 and RESERVE1Rodrigo Siqueira1-2/+1
This commit drops the RESERVE0 and RESERVE1 since both of them can be summarized as RESERVED. Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Acked-by: Roman Li <roman.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-10drm/amd/display: Drop legacy codeRodrigo Siqueira2-23/+0
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Acked-by: Roman Li <roman.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-10drm/amd/display: Update DSC compute parameter calculationRodrigo Siqueira1-4/+3
Adjust bytes per pixel calculation to use div_u64. Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Acked-by: Roman Li <roman.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-10drm/amd/display: Add some missing debug registersRodrigo Siqueira1-0/+4
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Acked-by: Roman Li <roman.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-10drm/amd/display: Enable cur_rom_en even if cursor degamma is not enabledRodrigo Siqueira1-3/+1
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Acked-by: Roman Li <roman.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-10drm/amd/display: Set alpha enable to 0 for some specific formatsRodrigo Siqueira1-0/+4
Set alpha_en to 0 in some specific color formats. Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Acked-by: Roman Li <roman.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-10drm/amd/display: Initialize DP ref clk with the correct clockRodrigo Siqueira1-2/+2
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Acked-by: Roman Li <roman.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-10drm/amd/display: 3.2.279Aric Cyr1-1/+1
This version pairs with DMUB FW Release 0.0.211.0 for dcn314, dcn35, dcn351 and brings along the following: - Fix underflow in subvp/non-subvp configs - Fix compiler warnings - Add handling for DC power mode - Add extra logging for DMUB, HUBP and OTG - Add timing pixel encoding for mst mode validation - Expand supported Replay residency mode - Allow HPO PG and RCG for DCN35 - Update pipe topology log to support subvp - Disable Z8 minimum stutter period check for DCN35 - Enable RCO for HDMISTREAMCLK in DCN35 Acked-by: Roman Li <roman.li@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-10drm/amd/display: Fix compiler warnings on high compiler warning levelsAric Cyr33-53/+42
[why] Enabling higher compiler warning levels results in many issues that can be trivially resolved as well as some potentially critical issues. [how] Fix all compiler warnings found with various compilers and higher warning levels. Primarily, potentially uninitialized variables and unreachable code. Reviewed-by: Leo Li <sunpeng.li@amd.com> Acked-by: Roman Li <roman.li@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-10drm/amd/display: move build test pattern params as part of pipe resource ↵Wenjing Liu5-9/+37
update for odm [why] Move built test pattern as part of pipe resource update for odm to ensure we rebuild test pattern params every time we have an ODM update Reviewed-by: George Shen <george.shen@amd.com> Acked-by: Roman Li <roman.li@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-10drm/amd/display: Add handling for DC power modeJoshua Aberback12-38/+108
[Why] Future implementations will require a distinction between AC power and DC power (wall power and battery power, respectively). To accomplish this, adding a power mode parameter to certain dc interfaces, and adding a separate DML2 instance for DC mode validation. Default behaviour unchanged. Reviewed-by: Jun Lei <jun.lei@amd.com> Reviewed-by: Aric Cyr <aric.cyr@amd.com> Acked-by: Roman Li <roman.li@amd.com> Signed-off-by: Joshua Aberback <joshua.aberback@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-10drm/amd/display: remove context->dml2 dependency from DML21 wrapperJoshua Aberback5-6/+7
[Why] When the DML2 wrapper explicitly accesses context->dml2, that creates a dependency on where dc saves the DML object. This dependency makes it harder to have multiple co-existing DML objects, which we would like to have for upcoming functionality. [How] - make all DML21 interfaces take in a DML2 object as parameter - remove all references to context->dml2, use parameter instead Reviewed-by: Jun Lei <jun.lei@amd.com> Reviewed-by: Aric Cyr <aric.cyr@amd.com> Acked-by: Roman Li <roman.li@amd.com> Signed-off-by: Joshua Aberback <joshua.aberback@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-10drm/amd/display: Add extra DMUB logging to track message timeoutAlvin Lee1-1/+9
[Description] - Add logging for first DMUB inbox message that timed out to diagnostic data - It is useful to track the first failed message for debug purposes because once DMUB becomes hung (typically on a message), it will remain hung and all subsequent messages. In these cases we're interested in knowing which is the first message that failed. Reviewed-by: Josip Pavic <josip.pavic@amd.com> Acked-by: Roman Li <roman.li@amd.com> Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-10drm/amd/display: add root clock control function pointer to fix display ↵Xi (Alex) Liu1-0/+1
corruption [Why and how] External display has corruption because no root clock control function. Add the function pointer to fix the issue. Reviewed-by: Daniel Miess <daniel.miess@amd.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Roman Li <roman.li@amd.com> Signed-off-by: Xi (Alex) Liu <xi.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-10drm/amd/display: Disable Z8 minimum stutter period check for DCN35Nicholas Kazlauskas1-1/+1
[Why] The threshold is no longer useful for blocking suboptimal power states for DCN35 based on real measurement. [How] Reduce to the minimum threshold duration, 1us. Reviewed-by: Gabe Teeger <gabe.teeger@amd.com> Acked-by: Roman Li <roman.li@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-10drm/amd/display: Add extra logging for HUBP and OTGAlvin Lee5-0/+15
[Description] Add extra logging for DCSURF_FLIP_CNTL, DCHUBP_CNTL, OTG_MASTER_EN, and OTG_DOUBLE_BUFFER_CONTROL for more debuggability for a system crash. Reviewed-by: Samson Tam <samson.tam@amd.com> Acked-by: Roman Li <roman.li@amd.com> Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-10drm/amd/display: Add OTG check for set AV muteLeo (Hanghong) Ma1-1/+1
[Why && How] OTG can be disabled before setting dpms on. Add check to skip wait when setting AV mute if OTG is disabled. Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Acked-by: Roman Li <roman.li@amd.com> Signed-off-by: Leo (Hanghong) Ma <hanghong.ma@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-10drm/amd/display: Allow HPO PG for DCN35Duncan Ma1-1/+1
[Why] HPO can be power gated unconditionally for DCN35. [How] Set disable flag to false. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Roman Li <roman.li@amd.com> Signed-off-by: Duncan Ma <duncan.ma@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-10drm/amd/display: Enable RCO for HDMISTREAMCLK in DCN35Daniel Miess2-2/+13
[Why & How] Enable root clock optimization for HDMISTREAMCLK and only disable it when it's actively being used. Reviewed-by: Charlene Liu <charlene.liu@amd.com> Acked-by: Roman Li <roman.li@amd.com> Signed-off-by: Daniel Miess <daniel.miess@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-10drm/amd/display: Add dummy interface for tracing DCN32 SMU messagesGeorge Shen3-1/+23
[Why/How] Some issues may require a trace of the previous SMU messages from DC to understand the context and aid in debugging. Actual logging to be implemented when needed. Reviewed-by: Josip Pavic <josip.pavic@amd.com> Acked-by: Roman Li <roman.li@amd.com> Signed-off-by: George Shen <george.shen@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-10drm/amd/display: Enable DTBCLK DTO earlier in the sequenceSung Joon Kim1-16/+16
[why] As per programming guide, we need to enable the virtual pixel clock via DTBCLK DTO and ungate the clock before we begin programming OPP/OPTC control registers. Otherwise, the double-buffered registers will be left pending until the clocks are enabled. [how] Move the DTBCLK DTO programming up to where we do the legacy DP DTO programming. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Roman Li <roman.li@amd.com> Signed-off-by: Sung Joon Kim <sungjoon.kim@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-10drm/amd/display: update pipe topology log to support subvpWenjing Liu1-31/+65
[why] There is an ambiguity in subvp pipe topology log. The log doesn't show subvp relation to main stream and it is not clear that certain stream is an internal stream for subvp pipes. [how] Separate subvp pipe topology logging from main pipe topology. Log main stream indices instead of the internal stream for subvp pipes. The following is a sample log showing 2 streams with subvp enabled on both: pipe topology update ________________________ | plane0 slice0 stream0| |DPP1----OPP1----OTG1----| | plane0 slice0 stream1| |DPP0----OPP0----OTG0----| | (phantom pipes) | | plane0 slice0 stream0| |DPP3----OPP3----OTG3----| | plane0 slice0 stream1| |DPP2----OPP2----OTG2----| |________________________| Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Acked-by: Roman Li <roman.li@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-10drm/amd/display: Add dmub additional interface support for FAMSDillon Varone4-4/+4
[WHY&HOW] Update dmub and driver interface for future FAMS revisions. Reviewed-by: Anthony Koo <anthony.koo@amd.com> Acked-by: Roman Li <roman.li@amd.com> Signed-off-by: Dillon Varone <dillon.varone@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-10drm/amd/display: handle invalid connector indicesJoshua Aberback8-8/+10
[Why] The function to count the number of valid connectors does not guarantee that the first n indices are valid, only that there exist n valid indices. When invalid indices are present, this results in later valid connectors being missed, as processing would end after checking n indices. [How] - count valid indices separately from total indices examined - add explicit definition of MAX_LINKS Reviewed-by: Dillon Varone <dillon.varone@amd.com> Acked-by: Roman Li <roman.li@amd.com> Signed-off-by: Joshua Aberback <joshua.aberback@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-10drm/amd/display: Expand supported Replay residency modeLeon Huang3-4/+7
[Why] Dmub provides several Replay residency calculation methods, but current interface only supports either ALPM or PHY mode [How] Modify the interface for supporting different types of Replay residency calculation. Reviewed-by: Robin Chen <robin.chen@amd.com> Acked-by: Roman Li <roman.li@amd.com> Signed-off-by: Leon Huang <leon.huang1@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-10drm/amd/display: Toggle additional RCO options in DCN35Daniel Miess10-14/+314
[Why] With root clock optimization now enabled for DCN35 there are still RCO registers still not being toggled [How] Add in logic to toggle RCO registers for DPPCLK, DPSTREAMCLK and DSCCLK Reviewed-by: Charlene Liu <charlene.liu@amd.com> Acked-by: Roman Li <roman.li@amd.com> Signed-off-by: Daniel Miess <daniel.miess@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-10drm/amd/display: optimize dml2 pipe resource allocation orderWenjing Liu4-44/+97
[why] There could be cases that we are transition from MPC to ODM combine. In this case if we map pipes before unmapping MPC pipes, we might temporarly run out of pipes. The change reorders pipe resource allocation. So we unmapping pipes before mapping new pipes. Reviewed-by: Dillon Varone <dillon.varone@amd.com> Acked-by: Roman Li <roman.li@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-10drm/amd/display: fix underflow in some two display subvp/non-subvp configsSamson Tam2-130/+199
[Why] In two display configuration, switching between subvp and non-subvp may cause underflow because it moves an existing pipe between displays [How] Create helper function for applying pipe split flags Apply pipe split flags prior to deciding on subvp During subvp check, do not merge pipes, so it can retain previous pipe configuration Add check for prev odm pipe in subvp check For single display subvp case, use same odm policy for phantom pipes as main subvp pipe Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Acked-by: Roman Li <roman.li@amd.com> Signed-off-by: Samson Tam <samson.tam@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-10drm/amd/display: Fix compiler redefinition warnings for certain configsMounika Adhuri1-2/+2
[why & how] Modified definitions of 1 function and 2 structs to remove warnings on certain specific compiler configurations due to redefinition. Reviewed-by: Martin Leung <martin.leung@amd.com> Acked-by: Roman Li <roman.li@amd.com> Signed-off-by: Mounika Adhuri <moadhuri@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-31Merge tag 'kbuild-fixes-v6.9' of ↵Linus Torvalds5-5/+5
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - Deduplicate Kconfig entries for CONFIG_CXL_PMU - Fix unselectable choice entry in MIPS Kconfig, and forbid this structure - Remove unused include/asm-generic/export.h - Fix a NULL pointer dereference bug in modpost - Enable -Woverride-init warning consistently with W=1 - Drop KCSAN flags from *.mod.c files * tag 'kbuild-fixes-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kconfig: Fix typo HEIGTH to HEIGHT Documentation/llvm: Note s390 LLVM=1 support with LLVM 18.1.0 and newer kbuild: Disable KCSAN for autogenerated *.mod.c intermediaries kbuild: make -Woverride-init warnings more consistent modpost: do not make find_tosym() return NULL export.h: remove include/asm-generic/export.h kconfig: do not reparent the menu inside a choice block MIPS: move unselectable FIT_IMAGE_FDT_EPM5 out of the "System type" choice cxl: remove CONFIG_CXL_PMU entry in drivers/cxl/Kconfig
2024-03-31kbuild: make -Woverride-init warnings more consistentArnd Bergmann5-5/+5
The -Woverride-init warn about code that may be intentional or not, but the inintentional ones tend to be real bugs, so there is a bit of disagreement on whether this warning option should be enabled by default and we have multiple settings in scripts/Makefile.extrawarn as well as individual subsystems. Older versions of clang only supported -Wno-initializer-overrides with the same meaning as gcc's -Woverride-init, though all supported versions now work with both. Because of this difference, an earlier cleanup of mine accidentally turned the clang warning off for W=1 builds and only left it on for W=2, while it's still enabled for gcc with W=1. There is also one driver that only turns the warning off for newer versions of gcc but not other compilers, and some but not all the Makefiles still use a cc-disable-warning conditional that is no longer needed with supported compilers here. Address all of the above by removing the special cases for clang and always turning the warning off unconditionally where it got in the way, using the syntax that is supported by both compilers. Fixes: 2cd3271b7a31 ("kbuild: avoid duplicate warning options") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Acked-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2024-03-27drm/amd/display: Set DCN351 BB and IP the same as DCN35Xi Liu1-5/+1
[WHY & HOW] DCN351 and DCN35 should use the same bounding box and IP settings. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Jun Lei <jun.lei@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Xi Liu <xi.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-27drm/amd/display: Fix bounds check for dcn35 DcfClocksRoman Li1-1/+1
[Why] NumFclkLevelsEnabled is used for DcfClocks bounds check instead of designated NumDcfClkLevelsEnabled. That can cause array index out-of-bounds access. [How] Use designated variable for dcn35 DcfClocks bounds check. Fixes: a8edc9cc0b14 ("drm/amd/display: Fix array-index-out-of-bounds in dcn35_clkmgr") Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Sun peng Li <sunpeng.li@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-27drm/amd/display: Remove MPC rate control logic from DCN30 and aboveGeorge Shen6-155/+41
[Why] MPC flow rate control is not needed for DCN30 and above. Current logic that uses it can result in underflow for certain edge cases (such as DSC N422 + ODM combine + 422 left edge pixel). [How] Remove MPC flow rate control logic and programming for DCN30 and above. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: George Shen <george.shen@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-27drm/amd/display: fix a dereference of a NULL pointerWenjing Liu1-2/+4
[why&how] In some platform out_transfer_func may not be popualted. We need to check for null before dereferencing it. Fixes: d2dea1f14038 ("drm/amd/display: Generalize new minimal transition path") Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-27drm/amd/display: Send DTBCLK disable message on first commitTaimur Hassan1-0/+5
[Why] Previous patch to allow DTBCLK disable didn't address boot case. Driver thinks DTBCLK is disabled by default, so we don't send disable message to PMFW. DTBCLK is then enabled at idle desktop on boot, burning power. [How] Set dtbclk_en to true on boot so that disable message is sent during first commit. Fixes: 27750e176a4f ("drm/amd/display: Allow DTBCLK disable for DCN35") Reviewed-by: Charlene Liu <charlene.liu@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Taimur Hassan <syed.hassan@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-27drm/amd/display: Update dcn351 to latest dcn35 configSung Joon Kim3-7/+15
[why & how] There were some fixes in dcn35 that need to be ported over to dcn351 to prevent any regression. Signed-off-by: Sung Joon Kim <sungkim@amd.com> Reviewed-by: Liu, Xi (Alex) <xiliu102@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-27drm/amd/display: increase bb clock for DCN351Xi Liu1-14/+76
[Why and how] Bounding box clocks for DCN351 should be increased as per request Reviewed-by: Swapnil Patel <swapnil.patel@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Xi Liu <xi.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.39.0) at 2026-05-23 11:16:01 +0300