summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd/display/dc/dcn32
AgeCommit message (Collapse)AuthorFilesLines
2022-06-03drm/amd/display: add new pixel rate programmingJun Lei5-7/+72
[why] New dividers in DCCG need to be programmed depending on encoder/stream type since pixels per clock in OTG/DIO is different DIO also needs additional programming depending on pixels per clock Signed-off-by: Jun Lei <Jun.Lei@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
2022-06-03drm/amd/display: Remove W/A for ODM memory pinsAlvin Lee1-1/+1
[Description] By default we can now set ODM_MEM_VBLANK_PWR_MODE=1 Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-03drm/amd/display: do not override CURSOR_REQ_MODE when SubVP is not enabledSamson Tam1-2/+5
[Why] HUBP_UNBOUNDED_REQ_MODE and CURSOR_REQ_MODE are normally set together. In hubp32_prepare_subvp_buffering() call, CURSOR_REQ_MODE is set based on whether SubVP is enabled or not. For non MPO case, both REQ_MODE registers are set to 1. But since SubVP is not enabled, then CURSOR_REQ_MODE is set to 0, overriding the previous value. [How] Do not set CURSOR_REQ_MODE to 0 if SubVP is not enabled. This will allow CURSOR_REQ_MODE to stay as 1 in the non MPO case. Add note to follow up and check case for single pipe MPO and SubVP enabled as this would cause both REQ_MODE registers to be set to 0 but SubVP enabled would override CURSOR_REQ_MODE to 1. Signed-off-by: Samson Tam <Samson.Tam@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-03drm/amd/display: change dsc image width cap for dcn32 and dcn321Dillon Varone1-0/+3
Set appropriate caps for DCN3.2.x. Signed-off-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-03drm/amd/display: set dram speed for all statesDillon Varone1-1/+5
[WHY?] If higher states have memory speed set to 0 MT/s currently they do not get set to the highest value which can cause validation failures. [HOW?] Set unpopulated higher states to max value. Signed-off-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-03drm/amd/display: use updated clock source init routineCharlene Liu1-1/+1
[why] Use correct clock source initialization routine for DCN32/321 Signed-off-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-03drm/amd/display: disable idle optimizationsAurabindo Pillai1-0/+1
Disable idle optimizations until SMU can handle them to prevent DMUB timeout and subsequent system freeze Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Acked-by: Jerry Zuo <jerry.zuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-03drm/amd/display: Various DML fixes to enable higher timingsDillon Varone2-13/+24
Fixes to enable higher rate timings for DCN3.2.x. Signed-off-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Chaitanya Dhere <chaitanya.dhere@amd.com> Signed-off-by: Nevenko Stupar <Nevenko.Stupar@amd.com> Acked-by: Jerry Zuo <jerry.zuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-03drm/amd/display: Use DTBCLK for valid pixel clockEric Bernstein1-6/+14
Use DTBCLK for valid pixel clock generation Signed-off-by: Eric Bernstein <eric.bernstein@amd.com> Acked-by: Jerry Zuo <jerry.zuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-03drm/amd/display: Add missing instance for clock source registerAlvin Lee1-1/+2
[Description] Need to add inst 5 for clk_src_regs because there are 5 PHY instances in DCN32 & DCN321. Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Acked-by: Jerry Zuo <jerry.zuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-03drm/amd/display: Fix USBC link creationDillon Varone2-3/+32
[Description] Add USBC connector ID to align with new VBIOS parsing. Add seperate DCN321 link encoder due to different PHY version affecting DP ALT related registers. Signed-off-by: Dillon Varone <dillon.varone@amd.com> Acked-by: Jerry Zuo <jerry.zuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-03drm/amd/display: Add dependant changes for DCN32/321Aurabindo Pillai6-34/+104
[Why&How] This patch adds necessary changes needed in DC files outside DCN32/321 specific tree v2: squash in updates (Alex) Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-03drm/amd/display: add DCN32/321 specific files for Display CoreAurabindo Pillai27-0/+10388
Add core DC support for DCN 3.2.x. v2: squash in fixup (Alex) Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-01 19:21:41 +0300