summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd/display/amdgpu_dm
AgeCommit message (Collapse)AuthorFilesLines
2024-02-05drm/amdgpu: apply the RV2 system aperture fix to RN/CZN as wellAlex Deucher1-2/+6
[ Upstream commit 16783d8ef08448815e149e40c82fc1e1fc41ddbf ] These chips needs the same fix. This was previously not seen on then since the AGP aperture expanded the system aperture, but this showed up again when AGP was disabled. Reviewed-and-tested-by: Jiadong Zhu <Jiadong.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-02-05Re-revert "drm/amd/display: Enable Replay for static screen use cases"Ivan Lipski2-30/+1
[ Upstream commit d6398866a6b47e92319ef6efdb0126a4fbb7796a ] This reverts commit 44e60b14d5a72f91fd0bdeae8da59ae37a3ca8e5. Since, it causes a regression in which eDP displays with PSR support, but no Replay support (Sink support <= 0x03), fail to enable PSR and consequently all IGT amd_psr tests fail. So, revert this until a more suitable fix can be found. This got brought back accidently with the backmerge. Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Ivan Lipski <ivlipski@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-02-01drm/amd/display: Align the returned error code with legacy DPWayne Lin1-0/+5
commit bfe79f5fff1300d96203383582b078c7b0aec80a upstream. [Why] For usb4 connector, AUX transaction is handled by dmub utilizing a differnt code path comparing to legacy DP connector. If the usb4 DP connector is disconnected, AUX access will report EBUSY and cause igt@kms_dp_aux_dev fail. [How] Align the error code with the one reported by legacy DP as EIO. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Wayne Lin <Wayne.Lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-01Revert "drm/amd/display: fix bandwidth validation failure on DCN 2.1"Ivan Lipski1-1/+1
commit c2ab9ce0ee7225fc05f58a6671c43b8a3684f530 upstream. This commit causes dmesg-warn on several IGT tests on DCN 3.1.6: *ERROR* link_enc_cfg_validate: Invalid link encoder assignments - 0x1c Affected IGT tests include: - amdgpu/[amd_assr|amd_plane|amd_hotplug] - kms_atomic - kms_color - kms_flip - kms_properties - kms_universal_plane and some other tests This reverts commit 3a0fa3bc245ef92838a8296e0055569b8dff94c4. Cc: Melissa Wen <mwen@igalia.com> Cc: Hamza Mahfooz <hamza.mahfooz@amd.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Ivan Lipski <ivlipski@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-01drm/amd/display: fix bandwidth validation failure on DCN 2.1Melissa Wen1-1/+1
commit 3a0fa3bc245ef92838a8296e0055569b8dff94c4 upstream. IGT `amdgpu/amd_color/crtc-lut-accuracy` fails right at the beginning of the test execution, during atomic check, because DC rejects the bandwidth state for a fb sizing 64x64. The test was previously working with the deprecated dc_commit_state(). Now using dc_validate_with_context() approach, the atomic check needs to perform a full state validation. Therefore, set fast_validation to false in the dc_validate_global_state call for atomic check. Cc: stable@vger.kernel.org Fixes: b8272241ff9d ("drm/amd/display: Drop dc_commit_state in favor of dc_commit_streams") Signed-off-by: Melissa Wen <mwen@igalia.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-26drm/dp_mst: Fix fractional DSC bpp handlingVille Syrjälä2-2/+2
[ Upstream commit 7707dd6022593f3edd8e182e7935870cf326f874 ] The current code does '(bpp << 4) / 16' in the MST PBN calculation, but that is just the same as 'bpp' so the DSC codepath achieves absolutely nothing. Fix it up so that the fractional part of the bpp value is actually used instead of truncated away. 64*1006 has enough zero lsbs that we can just shift that down in the dividend and thus still manage to stick to a 32bit divisor. And while touching this, let's just make the whole thing more straightforward by making the passed in bpp value .4 binary fixed point always, instead of having to pass in different things based on whether DSC is enabled or not. v2: - Fix DSC kunit test cases. Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Lyude Paul <lyude@redhat.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: David Francis <David.Francis@amd.com> Cc: Mikita Lipski <mikita.lipski@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Fixes: dc48529fb14e ("drm/dp_mst: Add PBN calculation for DSC modes") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> [Imre: Fix kunit test cases] Acked-by: Maxime Ripard <mripard@kernel.org> Reviewed-by: Lyude Paul <lyude@redhat.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231030155843.2251023-3-imre.deak@intel.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-01-20drm/amd/display: Add monitor patch for specific eDPIvan Lipski1-0/+6
[ Upstream commit 3d71a8726e05a35beb9de394e86ce896d69e563f ] [WHY] Some eDP panels's ext caps don't write initial value cause the value of dpcd_addr(0x317) is random. It means that sometimes the eDP will clarify it is OLED, miniLED...etc cause the backlight control interface is incorrect. [HOW] Add a new panel patch to remove sink ext caps(HDR,OLED...etc) Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Sun peng Li <sunpeng.li@amd.com> Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Ivan Lipski <ivlipski@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-01-10drm/amd/display: Fix sending VSC (+ colorimetry) packets for DP/eDP displays ↵Joshua Ashton1-3/+5
without PSR commit 202260f64519e591b5cd99626e441b6559f571a3 upstream. The check for sending the vsc infopacket to the display was gated behind PSR (Panel Self Refresh) being enabled. The vsc infopacket also contains the colorimetry (specifically the container color gamut) information for the stream on modern DP. PSR is typically only supported on mobile phone eDP displays, thus this was not getting sent for typical desktop monitors or TV screens. This functionality is needed for proper HDR10 functionality on DP as it wants BT2020 RGB/YCbCr for the container color space. Cc: stable@vger.kernel.org Cc: Harry Wentland <harry.wentland@amd.com> Cc: Xaver Hugl <xaver.hugl@gmail.com> Cc: Melissa Wen <mwen@igalia.com> Fixes: 15f9dfd545a1 ("drm/amd/display: Register Colorspace property for DP and HDMI") Tested-by: Simon Berz <simon@berz.me> Tested-by: Xaver Hugl <xaver.hugl@kde.org> Signed-off-by: Joshua Ashton <joshua@froggi.es> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-10drm/amd/display: pbn_div need be updated for hotplug eventWayne Lin1-2/+1
commit 9cdef4f720376ef0fb0febce1ed2377c19e531f9 upstream. link_rate sometime will be changed when DP MST connector hotplug, so pbn_div also need be updated; otherwise, it will mismatch with link_rate, causes no output in external monitor. This is a backport to 6.7 and older. Cc: stable@vger.kernel.org Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Jerry Zuo <jerry.zuo@amd.com> Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Wade Wang <wade.wang@hp.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-01drm/amd/display: fix hw rotated modes when PSR-SU is enabledHamza Mahfooz1-0/+3
[ Upstream commit f528ee145bd0076cd0ed7e7b2d435893e6329e98 ] We currently don't support dirty rectangles on hardware rotated modes. So, if a user is using hardware rotated modes with PSR-SU enabled, use PSR-SU FFU for all rotated planes (including cursor planes). Cc: stable@vger.kernel.org Fixes: 30ebe41582d1 ("drm/amd/display: add FB_DAMAGE_CLIPS support") Reported-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/2952 Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Tested-by: Bin Li <binli@gnome.org> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-08drm/amd/display: fix ABM disablementHamza Mahfooz1-3/+5
commit b9f46f0b98784e40288ee393f863f553fde062fa upstream. On recent versions of DMUB firmware, if we want to completely disable ABM we have to pass ABM_LEVEL_IMMEDIATE_DISABLE as the requested ABM level to DMUB. Otherwise, LCD eDP displays are unable to reach their maximum brightness levels. So, to fix this whenever the user requests an ABM level of 0 pass ABM_LEVEL_IMMEDIATE_DISABLE to DMUB instead. Also, to keep the user's experience consistent map ABM_LEVEL_IMMEDIATE_DISABLE to 0 when a user tries to read the requested ABM level. Cc: stable@vger.kernel.org # 6.1+ Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-11-28drm/amd/display: Change the DMCUB mailbox memory location from FB to inboxLewis Huang1-6/+7
commit 5911d02cac70d7fb52009fbd37423e63f8f6f9bc upstream. [WHY] Flush command sent to DMCUB spends more time for execution on a dGPU than on an APU. This causes cursor lag when using high refresh rate mouses. [HOW] 1. Change the DMCUB mailbox memory location from FB to inbox. 2. Only change windows memory to inbox. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Lewis Huang <lewis.huang@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-11-28drm/amd/display: Enable fast plane updates on DCN3.2 and aboveTianci Yin1-4/+4
commit 435f5b369657cffee4b04db1f5805b48599f4dbe upstream. [WHY] When cursor moves across screen boarder, lag cursor observed, since subvp settings need to sync up with vblank that causes cursor updates being delayed. [HOW] Enable fast plane updates on DCN3.2 to fix it. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Tianci Yin <tianci.yin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-11-28drm/amd/display: fix a NULL pointer dereference in amdgpu_dm_i2c_xfer()Mario Limonciello1-0/+3
commit b71f4ade1b8900d30c661d6c27f87c35214c398c upstream. When ddc_service_construct() is called, it explicitly checks both the link type and whether there is something on the link which will dictate whether the pin is marked as hw_supported. If the pin isn't set or the link is not set (such as from unloading/reloading amdgpu in an IGT test) then fail the amdgpu_dm_i2c_xfer() call. Cc: stable@vger.kernel.org Fixes: 22676bc500c2 ("drm/amd/display: Fix dmub soft hang for PSR 1") Link: https://github.com/fwupd/fwupd/issues/6327 Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-11-28drm/amd/display: Fix DSC not Enabled on Direct MST SinkFangzhi Zuo1-15/+14
commit a58555359a9f870543aaddef277c3396159895ce upstream. [WHY & HOW] For the scenario when a dsc capable MST sink device is directly connected, it needs to use max dsc compression as the link bw constraint. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Roman Li <roman.li@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-11-20drm/amd/display: Bail from dm_check_crtc_cursor if no relevant changeMichel Dänzer1-1/+32
[ Upstream commit bc0b79ce2050aa523c38c96b6d26340a96bfbdca ] If no plane was newly enabled or changed scaling, there can be no new scaling mismatch with the cursor plane. By not pulling non-cursor plane states into all atomic commits while the cursor plane is enabled, this avoids synchronizing all cursor plane changes to vertical blank, which caused the following IGT tests to fail: kms_cursor_legacy@cursor-vs-flip.* kms_cursor_legacy@flip-vs-cursor.* Fixes: 003048ddf44b ("drm/amd/display: Check all enabled planes in dm_check_crtc_cursor") Signed-off-by: Michel Dänzer <mdaenzer@redhat.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-20drm/amd/display: Refactor dm_get_plane_scale helperMichel Dänzer1-9/+14
[ Upstream commit ec4d770bbb155674c2497f255f4199bdc42287a9 ] Cleanup, no functional change intended. Signed-off-by: Michel Dänzer <mdaenzer@redhat.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Stable-dep-of: bc0b79ce2050 ("drm/amd/display: Bail from dm_check_crtc_cursor if no relevant change") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-20drm/amd/display: Check all enabled planes in dm_check_crtc_cursorMichel Dänzer1-2/+12
[ Upstream commit 003048ddf44b1a6cfa57afa5a0cf40673e13f1ba ] It was only checking planes which had any state changes in the same commit. However, it also needs to check other enabled planes. Not doing this meant that a commit might spuriously "succeed", resulting in the cursor plane displaying with incorrect scaling. See https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3177#note_1824263 for an example. Fixes: d1bfbe8a3202 ("amd/display: check cursor plane matches underlying plane") Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Michel Dänzer <mdaenzer@redhat.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-20drm/amd/display: Fix null pointer dereference in error messageCong Liu1-2/+1
[ Upstream commit 0c3601a2fbfb265ce283651480e30c8e60459112 ] This patch fixes a null pointer dereference in the error message that is printed when the Display Core (DC) fails to initialize. The original message includes the DC version number, which is undefined if the DC is not initialized. Fixes: 9788d087caff ("drm/amd/display: improve the message printed when loading DC") Signed-off-by: Cong Liu <liucong2@kylinos.cn> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-21drm/amd/display: fix the ability to use lower resolution modes on eDPHamza Mahfooz1-2/+2
On eDP we can receive invalid modes from dm_update_crtc_state() for entirely new streams for which drm_mode_set_crtcinfo() shouldn't be called on. So, instead of calling drm_mode_set_crtcinfo() from within create_stream_for_sink() we can instead call it from amdgpu_dm_connector_mode_valid(). Since, we are guaranteed to only call drm_mode_set_crtcinfo() for valid modes from that function (invalid modes are rejected by that callback) and that is the only user of create_validate_stream_for_sink() that we need to call drm_mode_set_crtcinfo() for (as before commit cb841d27b876 ("drm/amd/display: Always pass connector_state to stream validation"), that is the only place where create_validate_stream_for_sink()'s dm_state was NULL). Cc: stable@vger.kernel.org Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2693 Fixes: cb841d27b876 ("drm/amd/display: Always pass connector_state to stream validation") Tested-by: Mark Broadworth <mark.broadworth@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-09-12drm/amd/display: fix replay_mode kernel-doc warningRandy Dunlap1-1/+1
Fix the typo in the kernel-doc for @replay_mode to prevent kernel-doc warnings: drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h:623: warning: Incorrect use of kernel-doc format: * @replay mode: Replay supported drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h:626: warning: Function parameter or member 'replay_mode' not described in 'amdgpu_hdmi_vsdb_info' Fixes: ec8e59cb4e0c ("drm/amd/display: Get replay info from VSDB") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kernel test robot <lkp@intel.com> Cc: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Leo Li <sunpeng.li@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: amd-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-09-12drm/amd/display: Adjust the MST resume flowWayne Lin1-13/+80
[Why] In drm_dp_mst_topology_mgr_resume() today, it will resume the mst branch to be ready handling mst mode and also consecutively do the mst topology probing. Which will cause the dirver have chance to fire hotplug event before restoring the old state. Then Userspace will react to the hotplug event based on a wrong state. [How] Adjust the mst resume flow as: 1. set dpcd to resume mst branch status 2. restore source old state 3. Do mst resume topology probing For drm_dp_mst_topology_mgr_resume(), it's better to adjust it to pull out topology probing work into a 2nd part procedure of the mst resume. Will have a follow up patch in drm. Reviewed-by: Chao-kai Wang <stylon.wang@amd.com> Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Acked-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-09-12drm/amd/display: Add dirty rect support for ReplayBhawanpreet Lakha1-1/+2
Dirty rect can be used with replay, so enable them to allow for more powersaving. Reviewed-by: Sun peng Li <sunpeng.li@amd.com> Acked-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-09-12Revert "drm/amd: Disable S/G for APUs when 64GB or more host memory"Hamza Mahfooz1-2/+3
This reverts commit 70e64c4d522b732e31c6475a3be2349de337d321. Since, we now have an actual fix for this issue, we can get rid of this workaround as it can cause pin failures if enough VRAM isn't carved out by the BIOS. Cc: stable@vger.kernel.org # 6.1+ Acked-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-09-12drm/amd/display: fix the white screen issue when >= 64GB DRAMYifan Zhang1-5/+9
Dropping bit 31:4 of page table base is wrong, it makes page table base points to wrong address if phys addr is beyond 64GB; dropping page_table_start/end bit 31:4 is unnecessary since dcn20_vmid_setup will do that. Also, while we are at it, cleanup the assignments using upper_32_bits()/lower_32_bits() and AMDGPU_GPU_PAGE_SHIFT. Cc: stable@vger.kernel.org Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2354 Fixes: 81d0bcf99009 ("drm/amdgpu: make display pinning more flexible (v2)") Acked-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com> Co-developed-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-09-07drm/amd/display: enable cursor degamma for DCN3+ DRM legacy gammaMelissa Wen1-0/+7
For DRM legacy gamma, AMD display manager applies implicit sRGB degamma using a pre-defined sRGB transfer function. It works fine for DCN2 family where degamma ROM and custom curves go to the same color block. But, on DCN3+, degamma is split into two blocks: degamma ROM for pre-defined TFs and `gamma correction` for user/custom curves and degamma ROM settings doesn't apply to cursor plane. To get DRM legacy gamma working as expected, enable cursor degamma ROM for implict sRGB degamma on HW with this configuration. Cc: stable@vger.kernel.org Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2803 Fixes: 96b020e2163f ("drm/amd/display: check attr flag before set cursor degamma on DCN3+") Signed-off-by: Melissa Wen <mwen@igalia.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-09-01Revert "Revert "drm/amd/display: Implement zpos property""Hamza Mahfooz1-0/+9
This reverts commit e2066eb4efe0e7d2d329d6e6765ed637a523ac45. The problematic IGT test case (i.e. kms_atomic@plane-immutable-zpos) has been fixed as of commit cb77add45011 ("tests/kms_atomic: remove zpos < N-planes assert") to the IGT repo. So, reintroduce the reverted code. Link: https://gitlab.freedesktop.org/drm/igt-gpu-tools/-/commit/cb77add45011b129e21f3cb2a4089a73dde56179 Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Melissa Wen <mwen@igalia.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-09-01drm/amd/display: fix mode scaling (RMX_.*)Hamza Mahfooz1-1/+1
As made mention of in commit 4a2df0d1f28e ("drm/amd/display: Fixed non-native modes not lighting up"), we shouldn't call drm_mode_set_crtcinfo() once the crtc timings have been decided. Since, it can cause settings to be unintentionally overwritten. So, since dm_state is never NULL now, we can use old_stream to determine if we should call drm_mode_set_crtcinfo() because we only need to set the crtc timing parameters for entirely new streams. Cc: Harry Wentland <harry.wentland@amd.com> Cc: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Fixes: bd49f19039c1 ("drm/amd/display: Always set crtcinfo from create_stream_for_sink") Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-09-01drm/amd/display: Enable Replay for static screen use casesBhawanpreet Lakha2-1/+30
- Setup replay config on device init. - Enable replay if feature is enabled (prioritize replay over PSR, since it can be enabled in more usecases) - Add debug masks to enable replay on supported ASICs Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-24BackMerge tag 'v6.5-rc7' into drm-nextDave Airlie1-0/+12
Linux 6.5-rc7 This is needed for the CI stuff and the msm pull has fixes in it. Signed-off-by: Dave Airlie <airlied@redhat.com>
2023-08-16drm/amd/display: Update adaptive sync infopackets for replayBhawanpreet Lakha1-2/+2
Update infopackets for replay Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-16drm/amd/display: Replace ternary operator with min() in ↵Srinivasan Shanmugam1-1/+1
'dm_helpers_parse_edid_caps' Fixes the following coccicheck: drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c:120:41-42: WARNING opportunity for min() Cc: Harry Wentland <harry.wentland@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-09drm/amd/display: Fix a regression on Polaris cardsMario Limonciello1-1/+1
DCE products don't define a `remove_stream_from_ctx` like DCN ones do. This means that when compute_mst_dsc_configs_for_state() is called it always returns -EINVAL which causes MST to fail to setup. Cc: stable@vger.kernel.org # 6.4.y Cc: Harry Wentland <Harry.Wentland@amd.com> Reported-by: Klaus.Kusche@computerix.info Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/2671 Fixes: efa4c4df864e ("drm/amd/display: call remove_stream_from_ctx from res_pool funcs") Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-09drm/amd: Disable S/G for APUs when 64GB or more host memoryMario Limonciello1-3/+2
Users report a white flickering screen on multiple systems that is tied to having 64GB or more memory. When S/G is enabled pages will get pinned to both VRAM carve out and system RAM leading to this. Until it can be fixed properly, disable S/G when 64GB of memory or more is detected. This will force pages to be pinned into VRAM. This should fix white screen flickers but if VRAM pressure is encountered may lead to black screens. It's a trade-off for now. Fixes: 81d0bcf99009 ("drm/amdgpu: make display pinning more flexible (v2)") Cc: Hamza Mahfooz <Hamza.Mahfooz@amd.com> Cc: Roman Li <roman.li@amd.com> Cc: <stable@vger.kernel.org> # 6.1.y: bf0207e172703 ("drm/amdgpu: add S/G display parameter") Cc: <stable@vger.kernel.org> # 6.4.y Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2735 Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2354 Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-09drm/amd/display: Get replay info from VSDBBhawanpreet Lakha3-0/+64
We need to make sure that the panel supports replay. This info is inside the amd vsdb (vendor specific data block). Create a function to parse the block and read the replay_mode bit. Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-09drm/amd/display: Fix a regression on Polaris cardsMario Limonciello1-1/+1
DCE products don't define a `remove_stream_from_ctx` like DCN ones do. This means that when compute_mst_dsc_configs_for_state() is called it always returns -EINVAL which causes MST to fail to setup. Cc: stable@vger.kernel.org # 6.4.y Cc: Harry Wentland <Harry.Wentland@amd.com> Reported-by: Klaus.Kusche@computerix.info Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/2671 Fixes: efa4c4df864e ("drm/amd/display: call remove_stream_from_ctx from res_pool funcs") Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-08drm/amd/display: Change HDCP update sequence for DMBhawanpreet Lakha1-42/+38
Refactor the sequence in hdcp_update_display() to use mod_hdcp_update_display(). Previous sequence: - remove()->add() This Sequence was used to update the display, (mod_hdcp_update_display didn't exist at the time). This meant for any hdcp updates (type changes, enable/disable) we would remove, reconstruct, and add. This leads to unnecessary calls to psp eventually New Sequence using mod_hdcp_update_display(): - add() once when stream is enabled - use update() for all updates The update function checks for prev == new states and will not unnecessarily end up calling psp via add/remove. Reviewed-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-08drm/amd/display: Enable DPIA trace with DC debug maskStylon Wang1-1/+6
[Why] DPIA traces from DMUB is not enabled by default, which is less convenient to debug DPIA related issues because we have to resort to other means to enable DPIA trace. [How] Reuse existing DC debug mask to enable DPIA trace log from kernel command line. This makes debugging DPIA issues easier especially when system power state (suspend/reboot) is involved. To turn on DPIA trace, simply add "amdgpu.dcdebugmask=0x80" to kernel command line. Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Stylon Wang <stylon.wang@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-08drm/amd/display: ensure async flips are only accepted for fast updatesHamza Mahfooz2-15/+21
We should be checking to see if async flips are supported in amdgpu_dm_atomic_check() (i.e. not dm_crtc_helper_atomic_check()). Also, async flipping isn't supported if a plane's framebuffer changes memory domains during an atomic commit. So, move the check from dm_crtc_helper_atomic_check() to amdgpu_dm_atomic_check() and check if the memory domain has changed in amdgpu_dm_atomic_check(). Cc: stable@vger.kernel.org Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2733 Fixes: c1e18c44dc7f ("drm/amd/display: only accept async flips for fast updates") Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-08drm/amd/display: Add Freesync Panel DM codeBhawanpreet Lakha3-1/+223
We need certain conditions for replay to be enabled, so create an interface in DM to enable/disable replay. Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-08Revert "drm/amd/display: Implement zpos property"Nicholas Choi1-9/+0
This reverts commit 5b29369b5488d54e466ef7c6a2020a4efc1d854f. This patch causes IGT test case 'kms_atomic@plane-immutable-zpos' to fail on AMDGPU hardware. Cc: Joshua Ashton <joshua@froggi.es> Signed-off-by: Nicholas Choi <Nicholas.Choi@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-08drm/amd/display: Temporary Disable MST DP Colorspace PropertyFangzhi Zuo1-1/+1
Create MST colorsapce property for downstream device would trigger warning message "RIP: 0010:drm_mode_object_add+0x8e/0xa0 [drm]" After driver is loaded and drm device is registered, create dp colorspace property triggers warning storm at WARN_ON(!dev->driver->load && dev->registered && !obj_free_cb); Temporary disabling MST dp colorspace property for now. Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-07drm/amd: Disable S/G for APUs when 64GB or more host memoryMario Limonciello1-3/+2
Users report a white flickering screen on multiple systems that is tied to having 64GB or more memory. When S/G is enabled pages will get pinned to both VRAM carve out and system RAM leading to this. Until it can be fixed properly, disable S/G when 64GB of memory or more is detected. This will force pages to be pinned into VRAM. This should fix white screen flickers but if VRAM pressure is encountered may lead to black screens. It's a trade-off for now. Fixes: 81d0bcf99009 ("drm/amdgpu: make display pinning more flexible (v2)") Cc: Hamza Mahfooz <Hamza.Mahfooz@amd.com> Cc: Roman Li <roman.li@amd.com> Cc: <stable@vger.kernel.org> # 6.1.y: bf0207e172703 ("drm/amdgpu: add S/G display parameter") Cc: <stable@vger.kernel.org> # 6.4.y Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2735 Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2354 Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-25drm/amd/display: Unlock on error path in ↵Dan Carpenter1-1/+1
dm_handle_mst_sideband_msg_ready_event() This error path needs to unlock the "aconnector->handle_mst_msg_ready" mutex before returning. Fixes: 4f6d9e38c4d2 ("drm/amd/display: Add polling method to handle MST reply packet") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-25drm/amd/display: Remove else after return in 'dm_vblank_get_counter' & ↵Srinivasan Shanmugam1-14/+17
'amdgpu_dm_backlight_get_level' Expressions under 'else' branch in function 'dm_vblank_get_counter' & 'amdgpu_dm_backlight_get_level' are executed whenever the expression in 'if' is False. Otherwise, return from function occurs. Therefore, there is no need in 'else', and it has been removed. Fixes the following: WARNING: else is not generally useful after a break or return + return 0; + else { WARNING: else is not generally useful after a break or return + return convert_brightness_to_user(&caps, avg); + } else { Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-25drm/amd/display: Unlock on error path in ↵Dan Carpenter1-1/+1
dm_handle_mst_sideband_msg_ready_event() This error path needs to unlock the "aconnector->handle_mst_msg_ready" mutex before returning. Fixes: bb4fa525f327 ("drm/amd/display: Add polling method to handle MST reply packet") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-18drm/amd/display: Add polling method to handle MST reply packetWayne Lin4-86/+159
[Why] Specific TBT4 dock doesn't send out short HPD to notify source that IRQ event DOWN_REP_MSG_RDY is set. Which violates the spec and cause source can't send out streams to mst sinks. [How] To cover this misbehavior, add an additional polling method to detect DOWN_REP_MSG_RDY is set. HPD driven handling method is still kept. Just hook up our handler to drm mgr->cbs->poll_hpd_irq(). Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Jerry Zuo <jerry.zuo@amd.com> Acked-by: Alan Liu <haoping.liu@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-18drm/amd/display: Clean up errors & warnings in amdgpu_dm.cSrinivasan Shanmugam1-68/+65
Fix the following errors & warnings reported by checkpatch: ERROR: space required before the open brace '{' ERROR: space required before the open parenthesis '(' ERROR: that open brace { should be on the previous line ERROR: space prohibited before that ',' (ctx:WxW) ERROR: else should follow close brace '}' ERROR: open brace '{' following function definitions go on the next line ERROR: code indent should use tabs where possible WARNING: braces {} are not necessary for single statement blocks WARNING: void function return statements are not generally useful WARNING: Block comments use * on subsequent lines WARNING: Block comments use a trailing */ on a separate line Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-18drm/amd/display: only accept async flips for fast updatesSimon Ser2-0/+20
Up until now, amdgpu was silently degrading to vsync when user-space requested an async flip but the hardware didn't support it. The hardware doesn't support immediate flips when the update changes the FB pitch, the DCC state, the rotation, enables or disables CRTCs or planes, etc. This is reflected in the dm_crtc_state.update_type field: UPDATE_TYPE_FAST means that immediate flip is supported. Silently degrading async flips to vsync is not the expected behavior from a uAPI point-of-view. Xorg expects async flips to fail if unsupported, to be able to fall back to a blit. i915 already behaves this way. This patch aligns amdgpu with uAPI expectations and returns a failure when an async flip is not possible. Signed-off-by: Simon Ser <contact@emersion.fr> Reviewed-by: André Almeida <andrealmeid@igalia.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: André Almeida <andrealmeid@igalia.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2023-07-18drm/amd/display: Add link encoding to timing BW calculation parametersGeorge Shen2-5/+17
[Why] There certain cases where the timing BW is dependent on the type of link encoding in use. Thus to calculate the correct BW required for a given timing, the link encoding should be added as a parameter. Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Acked-by: Alan Liu <haoping.liu@amd.com> Signed-off-by: George Shen <george.shen@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.39.0) at 2026-05-13 12:03:07 +0300