| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
[ Upstream commit 337b1b566db087347194e4543ddfdfa5645275cc ]
BAR resize operation is implemented in the pci_resize_resource() and
pbus_reassign_bridge_resources() functions. pci_resize_resource() can be
called either from __resource_resize_store() from sysfs or directly by the
driver for the Endpoint Device.
The pci_resize_resource() requires that caller has released the device
resources that share the bridge window with the BAR to be resized as
otherwise the bridge window is pinned in place and cannot be changed.
pbus_reassign_bridge_resources() rolls back resources if the resize
operation fails, but rollback is performed only for the bridge windows.
Because releasing the device resources are done by the caller of the BAR
resize interface, these functions performing the BAR resize do not have
access to the device resources as they were before the resize.
pbus_reassign_bridge_resources() could try __pci_bridge_assign_resources()
after rolling back the bridge windows as they were, however, it will not
guarantee the resource are assigned due to differences in how FW and the
kernel assign the resources (alignment of the start address and tail).
To perform rollback robustly, the BAR resize interface has to be altered to
also release the device resources that share the bridge window with the BAR
to be resized.
Also, remove restoring from the entries failed list as saved list should
now contain both the bridge windows and device resources so the extra
restore is duplicated work.
Some drivers (currently only amdgpu) want to prevent releasing some
resources. Add exclude_bars param to pci_resize_resource() and make amdgpu
pass its register BAR (BAR 2 or 5), which should never be released during
resize operation. Normally 64-bit prefetchable resources do not share a
bridge window with the 32-bit only register BAR, but there are various
fallbacks in the resource assignment logic which may make the resources
share the bridge window in rare cases.
This change (together with the driver side changes) is to counter the
resource releases that had to be done to prevent resource tree corruption
in the ("PCI: Release assigned resource before restoring them") change. As
such, it likely restores functionality in cases where device resources were
released to avoid resource tree conflicts which appeared to be "working"
when such conflicts were not correctly detected by the kernel.
Reported-by: Simon Richter <Simon.Richter@hogyros.de>
Link: https://lore.kernel.org/linux-pci/f9a8c975-f5d3-4dd2-988e-4371a1433a60@hogyros.de/
Reported-by: Alex Bennée <alex.bennee@linaro.org>
Link: https://lore.kernel.org/linux-pci/874irqop6b.fsf@draig.linaro.org/
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
[bhelgaas: squash amdgpu BAR selection from
https: //lore.kernel.org/r/20251114103053.13778-1-ilpo.jarvinen@linux.intel.com]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Alex Bennée <alex.bennee@linaro.org> # AVA, AMD GPU
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patch.msgid.link/20251113162628.5946-7-ilpo.jarvinen@linux.intel.com
Stable-dep-of: ee7471fe968d ("PCI: Skip Resizable BAR restore on read error")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit fe2b84f9228e2a0903221a4d0d8c350b018e9c0c ]
This commit fixes amdgpu to work on the Radeon HD 7870 XT
which has never worked with the Linux open source drivers before.
Some boards have "harvested" chips, meaning that some parts of
the chip are disabled and fused, and it's sold for cheaper and
under a different marketing name.
On a harvested chip, any of the following can be disabled:
- CUs (Compute Units)
- RBs (Render Backend, aka. ROP)
- Memory channels (ie. the chip has a lower bandwidth)
- TCCs (ie. less L2 cache)
Handle chips with harvested TCCs by patching the registers
that configure how TCCs are mapped.
If some TCCs are disabled, we need to make sure that
the disabled TCCs are not used, and the remaining TCCs
are used optimally.
TCP_CHAN_STEER_LO/HI control which TCC is used by TCP channels.
TCP_ADDR_CONFIG.NUM_TCC_BANKS controls how many channels are used.
Note that the TCC configuration is highly relevant to performance.
Suboptimal configuration (eg. CHAN_STEER=0) can significantly
reduce gaming performance.
For optimal performance:
- Rely on the CHAN_STEER from the golden registers table,
only skip disabled TCCs but keep the mapping order.
- Limit NUM_TCC_BANKS to number of active TCCs to avoid thrashing,
which performs better than using the same TCC twice.
v2:
- Also consider CGTS_USER_TCC_DISABLE for disabled TCCs.
Link: https://bugs.freedesktop.org/show_bug.cgi?id=60879
Closes: https://gitlab.freedesktop.org/drm/amd/-/work_items/2664
Fixes: 2cd46ad22383 ("drm/amdgpu: add graphic pipeline implementation for si v8")
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 00218d15528fab9f6b31241fe5904eea4fcaa30d)
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 13e4cf116dbf7a1fb8123a59bea2c098f30d3736 ]
UVD 3.1 firmware validation seems to always fail after
attempting it when it had already been validated.
(This works similarly with the VCE 1.0 as well.)
Don't attempt repeating the validation when it's already done.
This caused issues in situations when the system isn't able
to suspend the GPU properly and so the GPU isn't actually
powered down. Then amdgpu would fail when calling the IP
block resume function.
Closes: https://gitlab.freedesktop.org/drm/amd/-/work_items/2887
Fixes: bb7978111dd3 ("drm/amdgpu: fix SI UVD firmware validate resume fail")
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 889a2cfd889c4a4dd9d0c89ce9a8e60b78be71dd)
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ce43abd7ec9464cf954f90e1c69e11768b02fa0a ]
Found some typos while exploring amdgpu code.
Signed-off-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: 13e4cf116dbf ("drm/amdgpu/uvd3.1: Don't validate the firmware when already validated")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit e6e9faba8100628990cccd13f0f044a648c303cf upstream.
As pointed out by SDL, the previous condition may be vulnerable to
overflow.
Fixes: b193019860d6 ("drm/amdgpu/vcn3: Prevent OOB reads when parsing dec msg")
Cc: SDL <sdl@nppct.ru>
Signed-off-by: Benjamin Cheng <benjamin.cheng@amd.com>
Reviewed-by: Ruijing Dong <ruijing.dong@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit db00257ac9e4a51eb2515aaea161a019f7125e10)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 78d2e624fa073c14970aa097adcf3ea31c157a66 upstream.
sdma_v4_0_ring_emit_fence() contains two BUG_ON(addr & 0x3) assertions
that verify fence writeback addresses are dword-aligned. These
assertions can be reached from unprivileged userspace via crafted
DRM_IOCTL_AMDGPU_CS submissions, causing a fatal kernel panic in a
scheduler worker thread.
Replace both BUG_ON() calls with WARN_ON() to log the condition without
crashing the kernel. A misaligned fence address at this point indicates
a driver bug, but crashing the kernel is never the correct response when
the assertion is reachable from userspace.
The CS IOCTL path is the correct place to filter invalid submissions;
the ring emission callback is too late to do anything about it.
Fixes: 2130f89ced2c ("drm/amdgpu: add SDMA v4.0 implementation (v2)")
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: John B. Moore <jbmoore61@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit b90250bd933afd1ba94d86d6b13821997b22b18e)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7bbfb2559bcec39d1a4e1182d931a2046112c352 upstream.
Remove the BUG_ON(flags & AMDGPU_FENCE_FLAG_64BIT) assertion from
gfx_v9_0_ring_emit_fence_kiq(). The KIQ hardware supports 64-bit
fence writes; the 32-bit writeback address constraint is an
upper-layer convention, not a hardware limitation. The check serves
no purpose and should not be present.
Found by code inspection while investigating related BUG_ON
assertions in the GFX and compute ring emission paths.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: John B. Moore <jbmoore61@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 1b1101a46a426bb4328116bb5273c326a2780389)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b193019860d61e92da395eae2011f2f6716b182f upstream.
Check bounds against the end of the BO whenever we access the msg.
Signed-off-by: Benjamin Cheng <benjamin.cheng@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Ruijing Dong <ruijing.dong@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 095a8b0ad3c3b5cdc3850d961adb8a8f735220bb upstream.
RDNA4 (GFX 12) hardware removes the GDS, GWS, and OA on-chip memory
resources. The gfx_v12_0 initialisation code correctly leaves
adev->gds.gds_size, adev->gds.gws_size, and adev->gds.oa_size at
zero to reflect this.
amdgpu_ttm_init() unconditionally calls amdgpu_ttm_init_on_chip() for
each of these resources regardless of size. When the size is zero,
amdgpu_ttm_init_on_chip() forwards the call to ttm_range_man_init(),
which calls drm_mm_init(mm, 0, 0). drm_mm_init() immediately fires
DRM_MM_BUG_ON(start + size <= start) -- trivially true when size is
zero -- crashing the kernel during modprobe of amdgpu on an RX 9070 XT.
Guard against this by returning 0 early from
amdgpu_ttm_init_on_chip() when size_in_page is zero. This skips TTM
resource manager registration for hardware resources that are absent,
without affecting any other GPU type.
DRM_MM_BUG_ON() only asserts if CONFIG_DRM_DEBUG_MM is enabled in
the kernel config. This is apparently rarely enabled as these chips
have been in the market for over a year and this issue was only reported
now.
Link: https://lore.kernel.org/all/bug-221376-2300@https.bugzilla.kernel.org%2F/
Link: https://bugzilla.kernel.org/show_bug.cgi?id=221376
Oops-Analysis: http://oops.fenrus.org/reports/bugzilla.korg/221376/report.html
Assisted-by: GitHub Copilot:Claude Sonnet 4.6 linux-kernel-oops-x86.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 5719ce5865279cad4fd5f01011fe037168503f2d)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 5daff15cd013422bc6d1efcfe82b586800025384 ]
Root PD BO should be reserved before unmap and remove
a bo_va from VM otherwise lockdep will complain.
v2: check fpriv->csa_va is not NULL instead of amdgpu_mcbp (christian)
[14616.936827] WARNING: CPU: 6 PID: 1711 at drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:1762 amdgpu_vm_bo_del+0x399/0x3f0 [amdgpu]
[14616.937096] Call Trace:
[14616.937097] <TASK>
[14616.937102] amdgpu_driver_postclose_kms+0x249/0x2f0 [amdgpu]
[14616.937187] drm_file_free+0x1d6/0x300 [drm]
[14616.937207] drm_close_helper.isra.0+0x62/0x70 [drm]
[14616.937220] drm_release+0x5e/0x100 [drm]
[14616.937234] __fput+0x9f/0x280
[14616.937239] ____fput+0xe/0x20
[14616.937241] task_work_run+0x61/0x90
[14616.937246] exit_to_user_mode_prepare+0x215/0x220
[14616.937251] syscall_exit_to_user_mode+0x2a/0x60
[14616.937254] do_syscall_64+0x48/0x90
[14616.937257] entry_SYSCALL_64_after_hwframe+0x63/0xcd
Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[ The context change is due to the commit e56694f718f0
("drm/amdgpu: rename amdgpu_vm_bo_rmv to _del")
in v5.18 and the proper adoption is done which
is irrelevant to the logic of this patch. ]
Signed-off-by: Johnny Hao <johnny_haocn@sina.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2c1030f2e84885cc58bffef6af67d5b9d2e7098f upstream.
Replace non-atomic vm->process_info assignment with cmpxchg()
to prevent race when parent/child processes sharing a drm_file
both try to acquire the same VM after fork().
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alysa Liu <Alysa.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit c7c573275ec20db05be769288a3e3bb2250ec618)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 096bb75e13cc508d3915b7604e356bcb12b17766 ]
On Intel MacBookPros with switchable graphics, when the iGPU
is enabled, the address of VRAM gets put at 0 in the dGPU's
virtual address space. This is non-standard and seems to cause
issues with the cursor if it ends up at 0. We have the framework
to reserve memory at 0 in the address space, so enable it here if
the vram start address is 0.
Reviewed-and-tested-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4302
Cc: stable@vger.kernel.org
Cc: Mario Kleiner <mario.kleiner.de@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3ee1c72606bd2842f0f377fd4b118362af0323ae ]
Tune the sleep interval in the PSP fence wait loop from 10-100us to
60-100us.This adjustment results in an overall wait window of 1.2s
(60us * 20000 iterations) to 2 seconds (100us * 20000 iterations),
which guarantees that we can retrieve the correct fence value
Signed-off-by: Ce Sun <cesun102@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit af26fa751c2eef66916acbf0d3c3e9159da56186 ]
vcn_v2_0_start_sriov() declares a local variable "i" initialized to zero
and uses it only as the instance index in SOC15_REG_OFFSET(UVD, i, ...).
The value is never changed and all other fields are taken from
adev->vcn.inst[0], so this path only ever programs VCN instance 0.
This triggered a Smatch:
warn: iterator 'i' not incremented
Replace the dummy iterator with an explicit instance index of 0 in
SOC15_REG_OFFSET() calls.
Fixes: dd26858a9cd8 ("drm/amdgpu: implement initialization part on VCN2.0 for SRIOV")
Reported by: Dan Carpenter <dan.carpenter@linaro.org>
Cc: darlington Opara <darlington.opara@amd.com>
Cc: Jinage Zhao <jiange.zhao@amd.com>
Cc: Monk Liu <Monk.Liu@amd.com>
Cc: Emily Deng <Emily.Deng@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Emily Deng <Emily.Deng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit dea75df7afe14d6217576dbc28cc3ec1d1f712fb ]
Replace kmalloc_array() + copy_from_user() with memdup_array_user().
This shrinks the source code and improves separation between the kernel
and userspace slabs.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0e7581eda8c76d1ca4cf519631a4d4eb9f82b94c ]
Acquire jpeg_pg_lock before changes to jpeg power state
and release it after power off from idle work handler.
Signed-off-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6df8e84aa6b5b1812cc2cacd6b3f5ccbb18cda2b ]
The atomic variable vm_fault_info_updated is used to synchronize access to
adev->gmc.vm_fault_info between the interrupt handler and
get_vm_fault_info().
The default atomic functions like atomic_set() and atomic_read() do not
provide memory barriers. This allows for CPU instruction reordering,
meaning the memory accesses to vm_fault_info and the vm_fault_info_updated
flag are not guaranteed to occur in the intended order. This creates a
race condition that can lead to inconsistent or stale data being used.
The previous implementation, which used an explicit mb(), was incomplete
and inefficient. It failed to account for all potential CPU reorderings,
such as the access of vm_fault_info being reordered before the atomic_read
of the flag. This approach is also more verbose and less performant than
using the proper atomic functions with acquire/release semantics.
Fix this by switching to atomic_set_release() and atomic_read_acquire().
These functions provide the necessary acquire and release semantics,
which act as memory barriers to ensure the correct order of operations.
It is also more efficient and idiomatic than using explicit full memory
barriers.
Fixes: b97dfa27ef3a ("drm/amdgpu: save vm fault information for amdkfd")
Cc: stable@vger.kernel.org
Signed-off-by: Gui-Dong Han <hanguidong02@gmail.com>
Signed-off-by: Felix Kuehling <felix.kuehling@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[ kept kgd_dev parameter and adev cast in amdgpu_amdkfd_gpuvm_get_vm_fault_info ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 1a251f52cfdc417c84411a056bc142cbd77baef4 ]
This just standardizes the use of MIN() and MAX() macros, with the very
traditional semantics. The goal is to use these for C constant
expressions and for top-level / static initializers, and so be able to
simplify the min()/max() macros.
These macro names were used by various kernel code - they are very
traditional, after all - and all such users have been fixed up, with a
few different approaches:
- trivial duplicated macro definitions have been removed
Note that 'trivial' here means that it's obviously kernel code that
already included all the major kernel headers, and thus gets the new
generic MIN/MAX macros automatically.
- non-trivial duplicated macro definitions are guarded with #ifndef
This is the "yes, they define their own versions, but no, the include
situation is not entirely obvious, and maybe they don't get the
generic version automatically" case.
- strange use case #1
A couple of drivers decided that the way they want to describe their
versioning is with
#define MAJ 1
#define MIN 2
#define DRV_VERSION __stringify(MAJ) "." __stringify(MIN)
which adds zero value and I just did my Alexander the Great
impersonation, and rewrote that pointless Gordian knot as
#define DRV_VERSION "1.2"
instead.
- strange use case #2
A couple of drivers thought that it's a good idea to have a random
'MIN' or 'MAX' define for a value or index into a table, rather than
the traditional macro that takes arguments.
These values were re-written as C enum's instead. The new
function-line macros only expand when followed by an open
parenthesis, and thus don't clash with enum use.
Happily, there weren't really all that many of these cases, and a lot of
users already had the pattern of using '#ifndef' guarding (or in one
case just using '#undef MIN') before defining their own private version
that does the same thing. I left such cases alone.
Cc: David Laight <David.Laight@aculab.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Eliav Farber <farbere@amazon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit c661219cd7be75bb5599b525f16a455a058eb516 ]
Unlike later versions, UVD 3 has firmware validation.
For this to work, the UVD should be powered up correctly.
When DPM is enabled and the display clock is off,
the SMU may choose a power state which doesn't power
the UVD, which can result in failure to initialize UVD.
v2:
Add code comments to explain about the UVD power state
and how UVD clock is turned on/off.
Fixes: b38f3e80ecec ("drm amdgpu: SI UVD v3_1 (v2)")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7838fb5f119191403560eca2e23613380c0e425e ]
Commit b61badd20b44 ("drm/amdgpu: fix usage slab after free")
reordered when amdgpu_fence_driver_sw_fini() was called after
that patch, amdgpu_fence_driver_sw_fini() effectively became
a no-op as the sched entities we never freed because the
ring pointers were already set to NULL. Remove the NULL
setting.
Reported-by: Lin.Cao <lincao12@amd.com>
Cc: Vitaly Prosyak <vitaly.prosyak@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Fixes: b61badd20b44 ("drm/amdgpu: fix usage slab after free")
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit a525fa37aac36c4591cc8b07ae8957862415fbd5)
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 71403f58b4bb6c13b71c05505593a355f697fd94 upstream.
We already disable the audio pins in hw_fini so
there is no need to do it again in sw_fini.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4481
Cc: oushixiong <oushixiong1025@163.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 5eeb16ca727f11278b2917fd4311a7d7efb0bbd6)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ac4ed2da4c1305a1a002415058aa7deaf49ffe3e upstream.
This reverts commit b08425fa77ad2f305fe57a33dceb456be03b653f.
Revert this to align with 6.17 because the fixes tag
was wrong on this commit.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit be33e8a239aac204d7e9e673c4220ef244eb1ba3)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 040bc6d0e0e9c814c9c663f6f1544ebaff6824a8 ]
It should use vm flags instead of pte flags
to specify bo vm attributes.
Fixes: 7946340fa389 ("drm/amdgpu: Move csa related code to separate file")
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit b08425fa77ad2f305fe57a33dceb456be03b653f)
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a4a4c0ae6742ec7d6bf1548d2c6828de440814a0 ]
We shouldn't return after the last section.
We need to update the rest of the CSIB.
Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c8b8d7a4f1c5cdfbd61d75302fb3e3cdefb1a7ab ]
We shouldn't return after the last section.
We need to update the rest of the CSIB.
Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit be7652c23d833d1ab2c67b16e173b1a4e69d1ae6 ]
We shouldn't return after the last section.
We need to update the rest of the CSIB.
Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 683308af030cd9b8d3f1de5cbc1ee51788878feb ]
We shouldn't return after the last section.
We need to update the rest of the CSIB.
Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8307ebc15c1ea98a8a0b7837af1faa6c01514577 ]
We shouldn't return after the last section.
We need to update the rest of the CSIB.
Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e92f3f94cad24154fd3baae30c6dfb918492278d ]
Reset psp->cmd to NULL after releasing the buffer in function psp_sw_fini().
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Jiang Liu <gerry@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 057fef20b8401110a7bc1c2fe9d804a8a0bf0d24 ]
SRIOV VF does not have write access to AGP BAR regs.
Skip the writes to avoid a dmesg warning.
Signed-off-by: Victor Lu <victorchengchi.lu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit b61badd20b443eabe132314669bb51a263982e5c upstream.
[ +0.000021] BUG: KASAN: slab-use-after-free in drm_sched_entity_flush+0x6cb/0x7a0 [gpu_sched]
[ +0.000027] Read of size 8 at addr ffff8881b8605f88 by task amd_pci_unplug/2147
[ +0.000023] CPU: 6 PID: 2147 Comm: amd_pci_unplug Not tainted 6.10.0+ #1
[ +0.000016] Hardware name: ASUS System Product Name/ROG STRIX B550-F GAMING (WI-FI), BIOS 1401 12/03/2020
[ +0.000016] Call Trace:
[ +0.000008] <TASK>
[ +0.000009] dump_stack_lvl+0x76/0xa0
[ +0.000017] print_report+0xce/0x5f0
[ +0.000017] ? drm_sched_entity_flush+0x6cb/0x7a0 [gpu_sched]
[ +0.000019] ? srso_return_thunk+0x5/0x5f
[ +0.000015] ? kasan_complete_mode_report_info+0x72/0x200
[ +0.000016] ? drm_sched_entity_flush+0x6cb/0x7a0 [gpu_sched]
[ +0.000019] kasan_report+0xbe/0x110
[ +0.000015] ? drm_sched_entity_flush+0x6cb/0x7a0 [gpu_sched]
[ +0.000023] __asan_report_load8_noabort+0x14/0x30
[ +0.000014] drm_sched_entity_flush+0x6cb/0x7a0 [gpu_sched]
[ +0.000020] ? srso_return_thunk+0x5/0x5f
[ +0.000013] ? __kasan_check_write+0x14/0x30
[ +0.000016] ? __pfx_drm_sched_entity_flush+0x10/0x10 [gpu_sched]
[ +0.000020] ? srso_return_thunk+0x5/0x5f
[ +0.000013] ? __kasan_check_write+0x14/0x30
[ +0.000013] ? srso_return_thunk+0x5/0x5f
[ +0.000013] ? enable_work+0x124/0x220
[ +0.000015] ? __pfx_enable_work+0x10/0x10
[ +0.000013] ? srso_return_thunk+0x5/0x5f
[ +0.000014] ? free_large_kmalloc+0x85/0xf0
[ +0.000016] drm_sched_entity_destroy+0x18/0x30 [gpu_sched]
[ +0.000020] amdgpu_vce_sw_fini+0x55/0x170 [amdgpu]
[ +0.000735] ? __kasan_check_read+0x11/0x20
[ +0.000016] vce_v4_0_sw_fini+0x80/0x110 [amdgpu]
[ +0.000726] amdgpu_device_fini_sw+0x331/0xfc0 [amdgpu]
[ +0.000679] ? mutex_unlock+0x80/0xe0
[ +0.000017] ? __pfx_amdgpu_device_fini_sw+0x10/0x10 [amdgpu]
[ +0.000662] ? srso_return_thunk+0x5/0x5f
[ +0.000014] ? __kasan_check_write+0x14/0x30
[ +0.000013] ? srso_return_thunk+0x5/0x5f
[ +0.000013] ? mutex_unlock+0x80/0xe0
[ +0.000016] amdgpu_driver_release_kms+0x16/0x80 [amdgpu]
[ +0.000663] drm_minor_release+0xc9/0x140 [drm]
[ +0.000081] drm_release+0x1fd/0x390 [drm]
[ +0.000082] __fput+0x36c/0xad0
[ +0.000018] __fput_sync+0x3c/0x50
[ +0.000014] __x64_sys_close+0x7d/0xe0
[ +0.000014] x64_sys_call+0x1bc6/0x2680
[ +0.000014] do_syscall_64+0x70/0x130
[ +0.000014] ? srso_return_thunk+0x5/0x5f
[ +0.000014] ? irqentry_exit_to_user_mode+0x60/0x190
[ +0.000015] ? srso_return_thunk+0x5/0x5f
[ +0.000014] ? irqentry_exit+0x43/0x50
[ +0.000012] ? srso_return_thunk+0x5/0x5f
[ +0.000013] ? exc_page_fault+0x7c/0x110
[ +0.000015] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ +0.000014] RIP: 0033:0x7ffff7b14f67
[ +0.000013] Code: ff e8 0d 16 02 00 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 03 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 41 c3 48 83 ec 18 89 7c 24 0c e8 73 ba f7 ff
[ +0.000026] RSP: 002b:00007fffffffe378 EFLAGS: 00000246 ORIG_RAX: 0000000000000003
[ +0.000019] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007ffff7b14f67
[ +0.000014] RDX: 0000000000000000 RSI: 00007ffff7f6f47a RDI: 0000000000000003
[ +0.000014] RBP: 00007fffffffe3a0 R08: 0000555555569890 R09: 0000000000000000
[ +0.000014] R10: 0000000000000000 R11: 0000000000000246 R12: 00007fffffffe5c8
[ +0.000013] R13: 00005555555552a9 R14: 0000555555557d48 R15: 00007ffff7ffd040
[ +0.000020] </TASK>
[ +0.000016] Allocated by task 383 on cpu 7 at 26.880319s:
[ +0.000014] kasan_save_stack+0x28/0x60
[ +0.000008] kasan_save_track+0x18/0x70
[ +0.000007] kasan_save_alloc_info+0x38/0x60
[ +0.000007] __kasan_kmalloc+0xc1/0xd0
[ +0.000007] kmalloc_trace_noprof+0x180/0x380
[ +0.000007] drm_sched_init+0x411/0xec0 [gpu_sched]
[ +0.000012] amdgpu_device_init+0x695f/0xa610 [amdgpu]
[ +0.000658] amdgpu_driver_load_kms+0x1a/0x120 [amdgpu]
[ +0.000662] amdgpu_pci_probe+0x361/0xf30 [amdgpu]
[ +0.000651] local_pci_probe+0xe7/0x1b0
[ +0.000009] pci_device_probe+0x248/0x890
[ +0.000008] really_probe+0x1fd/0x950
[ +0.000008] __driver_probe_device+0x307/0x410
[ +0.000007] driver_probe_device+0x4e/0x150
[ +0.000007] __driver_attach+0x223/0x510
[ +0.000006] bus_for_each_dev+0x102/0x1a0
[ +0.000007] driver_attach+0x3d/0x60
[ +0.000006] bus_add_driver+0x2ac/0x5f0
[ +0.000006] driver_register+0x13d/0x490
[ +0.000008] __pci_register_driver+0x1ee/0x2b0
[ +0.000007] llc_sap_close+0xb0/0x160 [llc]
[ +0.000009] do_one_initcall+0x9c/0x3e0
[ +0.000008] do_init_module+0x241/0x760
[ +0.000008] load_module+0x51ac/0x6c30
[ +0.000006] __do_sys_init_module+0x234/0x270
[ +0.000007] __x64_sys_init_module+0x73/0xc0
[ +0.000006] x64_sys_call+0xe3/0x2680
[ +0.000006] do_syscall_64+0x70/0x130
[ +0.000007] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ +0.000015] Freed by task 2147 on cpu 6 at 160.507651s:
[ +0.000013] kasan_save_stack+0x28/0x60
[ +0.000007] kasan_save_track+0x18/0x70
[ +0.000007] kasan_save_free_info+0x3b/0x60
[ +0.000007] poison_slab_object+0x115/0x1c0
[ +0.000007] __kasan_slab_free+0x34/0x60
[ +0.000007] kfree+0xfa/0x2f0
[ +0.000007] drm_sched_fini+0x19d/0x410 [gpu_sched]
[ +0.000012] amdgpu_fence_driver_sw_fini+0xc4/0x2f0 [amdgpu]
[ +0.000662] amdgpu_device_fini_sw+0x77/0xfc0 [amdgpu]
[ +0.000653] amdgpu_driver_release_kms+0x16/0x80 [amdgpu]
[ +0.000655] drm_minor_release+0xc9/0x140 [drm]
[ +0.000071] drm_release+0x1fd/0x390 [drm]
[ +0.000071] __fput+0x36c/0xad0
[ +0.000008] __fput_sync+0x3c/0x50
[ +0.000007] __x64_sys_close+0x7d/0xe0
[ +0.000007] x64_sys_call+0x1bc6/0x2680
[ +0.000007] do_syscall_64+0x70/0x130
[ +0.000007] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ +0.000014] The buggy address belongs to the object at ffff8881b8605f80
which belongs to the cache kmalloc-64 of size 64
[ +0.000020] The buggy address is located 8 bytes inside of
freed 64-byte region [ffff8881b8605f80, ffff8881b8605fc0)
[ +0.000028] The buggy address belongs to the physical page:
[ +0.000011] page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1b8605
[ +0.000008] anon flags: 0x17ffffc0000000(node=0|zone=2|lastcpupid=0x1fffff)
[ +0.000007] page_type: 0xffffefff(slab)
[ +0.000009] raw: 0017ffffc0000000 ffff8881000428c0 0000000000000000 dead000000000001
[ +0.000006] raw: 0000000000000000 0000000000200020 00000001ffffefff 0000000000000000
[ +0.000006] page dumped because: kasan: bad access detected
[ +0.000012] Memory state around the buggy address:
[ +0.000011] ffff8881b8605e80: fa fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
[ +0.000015] ffff8881b8605f00: 00 00 00 00 00 00 00 00 fc fc fc fc fc fc fc fc
[ +0.000015] >ffff8881b8605f80: fa fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
[ +0.000013] ^
[ +0.000011] ffff8881b8606000: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fc
[ +0.000014] ffff8881b8606080: fc fc fc fc fc fc fc fa fb fb fb fb fb fb fb fb
[ +0.000013] ==================================================================
The issue reproduced on VG20 during the IGT pci_unplug test.
The root cause of the issue is that the function drm_sched_fini is called before drm_sched_entity_kill.
In drm_sched_fini, the drm_sched_rq structure is freed, but this structure is later accessed by
each entity within the run queue, leading to invalid memory access.
To resolve this, the order of cleanup calls is updated:
Before:
amdgpu_fence_driver_sw_fini
amdgpu_device_ip_fini
After:
amdgpu_device_ip_fini
amdgpu_fence_driver_sw_fini
This updated order ensures that all entities in the IPs are cleaned up first, followed by proper
cleanup of the schedulers.
Additional Investigation:
During debugging, another issue was identified in the amdgpu_vce_sw_fini function. The vce.vcpu_bo
buffer must be freed only as the final step in the cleanup process to prevent any premature
access during earlier cleanup stages.
v2: Using Christian suggestion call drm_sched_entity_destroy before drm_sched_fini.
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
[Minor context change fixed.]
Signed-off-by: Bin Lan <bin.lan.cn@windriver.com>
Signed-off-by: He Zhe <zhe.he@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c0dd8a9253fadfb8e5357217d085f1989da4ef0a upstream.
The page_link lower bits of the first sg could contain something like
SG_END, if we are mapping a single VRAM page or contiguous blob which
fits into one sg entry. Rather pull out the struct page, and use that in
our check to know if we mapped struct pages vs VRAM.
Fixes: f44ffd677fb3 ("drm/amdgpu: add support for exporting VRAM using DMA-buf v3")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v5.8+
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 4afacc9948e1f8fdbca401d259ae65ad93d298c0 ]
When userspace invokes S4 the flow is:
1) amdgpu_pmops_prepare()
2) amdgpu_pmops_freeze()
3) Create hibernation image
4) amdgpu_pmops_thaw()
5) Write out image to disk
6) Turn off system
Then on resume amdgpu_pmops_restore() is called.
This flow has a problem that because amdgpu_pmops_thaw() is called
it will call amdgpu_device_resume() which will resume all of the GPU.
This includes turning the display hardware back on and discovering
connectors again.
This is an unexpected experience for the display to turn back on.
Adjust the flow so that during the S4 sequence display hardware is
not turned back on.
Reported-by: Xaver Hugl <xaver.hugl@gmail.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/2038
Cc: Muhammad Usama Anjum <usama.anjum@collabora.com>
Tested-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Link: https://lore.kernel.org/r/20250306185124.44780-1-mario.limonciello@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 68bfdc8dc0a1a7fdd9ab61e69907ae71a6fd3d91)
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit ec33964d9d88488fa954a03d476a8b811efc6e85 upstream.
8192x8192 is the maximum supported resolution.
Signed-off-by: David Rosca <david.rosca@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Ruijing Dong <ruijing.dong@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 6e0d2fde3ae8fdb5b47e10389f23ed2cb4daec5d)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 099bffc7cadff40bfab1517c3461c53a7a38a0d7 ]
There was a quirk added to add a workaround for a Sapphire
RX 5600 XT Pulse that didn't allow BAR resizing. However,
the quirk caused a regression with runtime pm on Dell laptops
using those chips, rather than narrowing the scope of the
resizing quirk, add a quirk to prevent amdgpu from resizing
the BAR on those Dell platforms unless runtime pm is disabled.
v2: update commit message, add runpm check
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/1707
Fixes: 907830b0fc9e ("PCI: Add a REBAR size quirk for Sapphire RX 5600 XT Pulse")
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 5235053f443cef4210606e5fb71f99b915a9723d)
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
large bar
[ Upstream commit e372baeb3d336b20fd9463784c577fd8824497cd ]
Some customer platforms do not enable mmconfig for various reasons,
such as bios bug, and therefore cannot access the GPU extend configuration
space through mmio.
When the system enters the d3cold state and resumes, the amdgpu driver
fails to resume because the extend configuration space registers of
GPU can't be restored. At this point, Usually we only see some failure
dmesg log printed by amdgpu driver, it is difficult to find the root
cause.
Therefor print a warnning message if the system can't access the
extended configuration space register when using large bar.
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: 099bffc7cadf ("drm/amdgpu: disable BAR resize on Dell G5 SE")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
This reverts commit d897650c5897b3d858ca97ab77d10041e8e34231 which is
commit 73dae652dcac776296890da215ee7dec357a1032 upstream.
The original patch 73dae652dcac (drm/amdgpu: rework resume handling for
display (v2)), was only targeted at kernels 6.11 and newer. It did not
apply cleanly to 6.12 so I backported it and it backport landed as
99a02eab8251 ("drm/amdgpu: rework resume handling for display (v2)"),
however there was a bug in the backport that was subsequently fixed in
063d380ca28e ("drm/amdgpu: fix backport of commit 73dae652dcac"). None
of this was intended for kernels older than 6.11, however the original
backport eventually landed in 6.6, 6.1, and 5.15.
Please revert the change from kernels 6.6, 6.1, and 5.15.
Link: https://lore.kernel.org/r/BL1PR12MB5144D5363FCE6F2FD3502534F7E72@BL1PR12MB5144.namprd12.prod.outlook.com
Link: https://lore.kernel.org/r/BL1PR12MB51449ADCFBF2314431F8BCFDF7132@BL1PR12MB5144.namprd12.prod.outlook.com
Reported-by: Salvatore Bonaccorso <carnil@debian.org>
Reported-by: Christian König <christian.koenig@amd.com>
Reported-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 85230ee36d88e7a09fb062d43203035659dd10a5 upstream.
Third time's the charm, I hope?
Fixes: d3116756a710 ("drm/ttm: rename bo->mem and make it a pointer")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3837
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 695c2c745e5dff201b75da8a1d237ce403600d04)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 73dae652dcac776296890da215ee7dec357a1032 upstream.
Split resume into a 3rd step to handle displays when DCC is
enabled on DCN 4.0.1. Move display after the buffer funcs
have been re-enabled so that the GPU will do the move and
properly set the DCC metadata for DCN.
v2: fix fence irq resume ordering
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.11.x
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This reverts commit aaf6160a4b7f9ee3cd91aa5b3251f5dbe2170f42.
The origin mainline patch fix a buffer overflow issue in
amdgpu_debugfs_gprwave_read(), but it has not been introduced in kernel
6.1 and older kernels. This patch add a check in a wrong function in the
same file.
Signed-off-by: Zhang Zekun <zhangzekun11@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit e2e97435783979124ba92d6870415c57ecfef6a5 ]
The driver needs to set the correct max_segment_size;
otherwise debug_dma_map_sg() will complain about the
over-mapping of the AMDGPU sg length as following:
WARNING: CPU: 6 PID: 1964 at kernel/dma/debug.c:1178 debug_dma_map_sg+0x2dc/0x370
[ 364.049444] Modules linked in: veth amdgpu(OE) amdxcp drm_exec gpu_sched drm_buddy drm_ttm_helper ttm(OE) drm_suballoc_helper drm_display_helper drm_kms_helper i2c_algo_bit rpcsec_gss_krb5 auth_rpcgss nfsv4 nfs lockd grace netfs xt_conntrack xt_MASQUERADE nf_conntrack_netlink xfrm_user xfrm_algo iptable_nat xt_addrtype iptable_filter br_netfilter nvme_fabrics overlay nfnetlink_cttimeout nfnetlink openvswitch nsh nf_conncount nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 libcrc32c bridge stp llc amd_atl intel_rapl_msr intel_rapl_common sunrpc sch_fq_codel snd_hda_codec_realtek snd_hda_codec_generic snd_hda_scodec_component snd_hda_codec_hdmi snd_hda_intel snd_intel_dspcfg edac_mce_amd binfmt_misc snd_hda_codec snd_pci_acp6x snd_hda_core snd_acp_config snd_hwdep snd_soc_acpi kvm_amd snd_pcm kvm snd_seq_midi snd_seq_midi_event crct10dif_pclmul ghash_clmulni_intel sha512_ssse3 snd_rawmidi sha256_ssse3 sha1_ssse3 aesni_intel snd_seq nls_iso8859_1 crypto_simd snd_seq_device cryptd snd_timer rapl input_leds snd
[ 364.049532] ipmi_devintf wmi_bmof ccp serio_raw k10temp sp5100_tco soundcore ipmi_msghandler cm32181 industrialio mac_hid msr parport_pc ppdev lp parport drm efi_pstore ip_tables x_tables pci_stub crc32_pclmul nvme ahci libahci i2c_piix4 r8169 nvme_core i2c_designware_pci realtek i2c_ccgx_ucsi video wmi hid_generic cdc_ether usbnet usbhid hid r8152 mii
[ 364.049576] CPU: 6 PID: 1964 Comm: rocminfo Tainted: G OE 6.10.0-custom #492
[ 364.049579] Hardware name: AMD Majolica-RN/Majolica-RN, BIOS RMJ1009A 06/13/2021
[ 364.049582] RIP: 0010:debug_dma_map_sg+0x2dc/0x370
[ 364.049585] Code: 89 4d b8 e8 36 b1 86 00 8b 4d b8 48 8b 55 b0 44 8b 45 a8 4c 8b 4d a0 48 89 c6 48 c7 c7 00 4b 74 bc 4c 89 4d b8 e8 b4 73 f3 ff <0f> 0b 4c 8b 4d b8 8b 15 c8 2c b8 01 85 d2 0f 85 ee fd ff ff 8b 05
[ 364.049588] RSP: 0018:ffff9ca600b57ac0 EFLAGS: 00010286
[ 364.049590] RAX: 0000000000000000 RBX: ffff88b7c132b0c8 RCX: 0000000000000027
[ 364.049592] RDX: ffff88bb0f521688 RSI: 0000000000000001 RDI: ffff88bb0f521680
[ 364.049594] RBP: ffff9ca600b57b20 R08: 000000000000006f R09: ffff9ca600b57930
[ 364.049596] R10: ffff9ca600b57928 R11: ffffffffbcb46328 R12: 0000000000000000
[ 364.049597] R13: 0000000000000001 R14: ffff88b7c19c0700 R15: ffff88b7c9059800
[ 364.049599] FS: 00007fb2d3516e80(0000) GS:ffff88bb0f500000(0000) knlGS:0000000000000000
[ 364.049601] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 364.049603] CR2: 000055610bd03598 CR3: 00000001049f6000 CR4: 0000000000350ef0
[ 364.049605] Call Trace:
[ 364.049607] <TASK>
[ 364.049609] ? show_regs+0x6d/0x80
[ 364.049614] ? __warn+0x8c/0x140
[ 364.049618] ? debug_dma_map_sg+0x2dc/0x370
[ 364.049621] ? report_bug+0x193/0x1a0
[ 364.049627] ? handle_bug+0x46/0x80
[ 364.049631] ? exc_invalid_op+0x1d/0x80
[ 364.049635] ? asm_exc_invalid_op+0x1f/0x30
[ 364.049642] ? debug_dma_map_sg+0x2dc/0x370
[ 364.049647] __dma_map_sg_attrs+0x90/0xe0
[ 364.049651] dma_map_sgtable+0x25/0x40
[ 364.049654] amdgpu_bo_move+0x59a/0x850 [amdgpu]
[ 364.049935] ? srso_return_thunk+0x5/0x5f
[ 364.049939] ? amdgpu_ttm_tt_populate+0x5d/0xc0 [amdgpu]
[ 364.050095] ttm_bo_handle_move_mem+0xc3/0x180 [ttm]
[ 364.050103] ttm_bo_validate+0xc1/0x160 [ttm]
[ 364.050108] ? amdgpu_ttm_tt_get_user_pages+0xe5/0x1b0 [amdgpu]
[ 364.050263] amdgpu_amdkfd_gpuvm_alloc_memory_of_gpu+0xa12/0xc90 [amdgpu]
[ 364.050473] kfd_ioctl_alloc_memory_of_gpu+0x16b/0x3b0 [amdgpu]
[ 364.050680] kfd_ioctl+0x3c2/0x530 [amdgpu]
[ 364.050866] ? __pfx_kfd_ioctl_alloc_memory_of_gpu+0x10/0x10 [amdgpu]
[ 364.051054] ? srso_return_thunk+0x5/0x5f
[ 364.051057] ? tomoyo_file_ioctl+0x20/0x30
[ 364.051063] __x64_sys_ioctl+0x9c/0xd0
[ 364.051068] x64_sys_call+0x1219/0x20d0
[ 364.051073] do_syscall_64+0x51/0x120
[ 364.051077] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ 364.051081] RIP: 0033:0x7fb2d2f1a94f
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit afe260df55ac280cd56306248cb6d8a6b0db095c ]
Under sriov, host driver will save and restore vf pci cfg space during
reset. And during device init, under sriov, pci_restore_state happens after
fullaccess released, and it can have race condition with mmio protection
enable from host side leading to missing interrupts.
So skip amdgpu_device_cache_pci_state for sriov.
Signed-off-by: Victor Zhao <Victor.Zhao@amd.com>
Acked-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 46186667f98fb7158c98f4ff5da62c427761ffcd ]
Free sg table when dma_map_sgtable() failed to avoid memory leak.
Signed-off-by: Lang Yu <lang.yu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 32e7ee293ff476c67b51be006e986021967bc525 ]
Need to dereference the atcs acpi buffer after
the method is executed, otherwise it will result in
a memory leak.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8b22f048331dfd45fdfbf0efdfb1d43deff7518d ]
Port this change to vega20_ih.c:
commit afbf7955ff01 ("drm/amdgpu: clear RB_OVERFLOW bit when enabling interrupts")
Original commit message:
"Why:
Setting IH_RB_WPTR register to 0 will not clear the RB_OVERFLOW bit
if RB_ENABLE is not set.
How to fix:
Set WPTR_OVERFLOW_CLEAR bit after RB_ENABLE bit is set.
The RB_ENABLE bit is required to be set, together with
WPTR_OVERFLOW_ENABLE bit so that setting WPTR_OVERFLOW_CLEAR bit
would clear the RB_OVERFLOW."
Signed-off-by: Victor Lu <victorchengchi.lu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit a6dd15981c03f2cdc9a351a278f09b5479d53d2e upstream.
acpi_evaluate_object() may return AE_NOT_FOUND (failure), which
would result in dereferencing buffer.pointer (obj) while being NULL.
Although this case may be unrealistic for the current code, it is
still better to protect against possible bugs.
Bail out also when status is AE_NOT_FOUND.
This fixes 1 FORWARD_NULL issue reported by Coverity
Report: CID 1600951: Null pointer dereferences (FORWARD_NULL)
Signed-off-by: Antonio Quartulli <antonio@mandelbit.com>
Fixes: c9b7c809b89f ("drm/amd: Guard against bad data for ATIF ACPI method")
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20241031152848.4716-1-antonio@mandelbit.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 91c9e221fe2553edf2db71627d8453f083de87a1)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 4d75b9468021c73108b4439794d69e892b1d24e3 upstream.
Avoid a possible buffer overflow if size is larger than 4K.
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit f5d873f5825b40d886d03bd2aede91d4cf002434)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f790a2c494c4ef587eeeb9fca20124de76a1646f upstream.
Users should not be able to run these.
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 7ba9395430f611cfc101b1c2687732baafa239d5)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit bf58f03931fdcf7b3c45cb76ac13244477a60f44 upstream.
If a BIOS provides bad data in response to an ATIF method call
this causes a NULL pointer dereference in the caller.
```
? show_regs (arch/x86/kernel/dumpstack.c:478 (discriminator 1))
? __die (arch/x86/kernel/dumpstack.c:423 arch/x86/kernel/dumpstack.c:434)
? page_fault_oops (arch/x86/mm/fault.c:544 (discriminator 2) arch/x86/mm/fault.c:705 (discriminator 2))
? do_user_addr_fault (arch/x86/mm/fault.c:440 (discriminator 1) arch/x86/mm/fault.c:1232 (discriminator 1))
? acpi_ut_update_object_reference (drivers/acpi/acpica/utdelete.c:642)
? exc_page_fault (arch/x86/mm/fault.c:1542)
? asm_exc_page_fault (./arch/x86/include/asm/idtentry.h:623)
? amdgpu_atif_query_backlight_caps.constprop.0 (drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c:387 (discriminator 2)) amdgpu
? amdgpu_atif_query_backlight_caps.constprop.0 (drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c:386 (discriminator 1)) amdgpu
```
It has been encountered on at least one system, so guard for it.
Fixes: d38ceaf99ed0 ("drm/amdgpu: add core driver (v4)")
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit c9b7c809b89f24e9372a4e7f02d64c950b07fdee)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 2c7795e245d993bcba2f716a8c93a5891ef910c9 ]
Enabling gfxoff quirk results in perfectly usable
graphical user interface on HP 705G4 DM with R5 2400G.
Without the quirk, X server is completely unusable as
every few seconds there is gpu reset due to ring gfx timeout.
Signed-off-by: Peng Liu <liupeng01@kylinos.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
