Age | Commit message (Collapse) | Author | Files | Lines |
|
Create sysfs interface also for sienna_cichlid.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
SDMA utilization calculations are enabled/disabled by
writing to SDMAx_PUB_DUMMY_REG2 register. Currently,
enable this only for Arcturus.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why&How]
To refactor DM IRQ management, all fields used by IRQ is best moved
to a separate struct so that main amdgpu_crtc struct need not be changed
Location of the new struct shall be in DM
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Output RAS init status
If RAS init fails, teardown RAS context
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
It needs to add ta DTM/HDCP print to get HDCP/DTM version info when cat
amdgpu_firmware_info
Signed-off-by: Changfeng <Changfeng.Zhu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
XGMI support is more complicated than single device support as
questions of synchronization between the device recovering from
PCI error and other members of the hive are required.
Leaving this for next round.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Reuse exsisting functions from GPU recovery to avoid code
duplications.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Cache the PCI state on boot and before each case where we might
loose it.
v2: Add pci_restore_state while caching the PCI state to avoid
breaking PCI core logic for stuff like suspend/resume.
v3: Extract pci_restore_state from amdgpu_device_cache_pci_state
to avoid superflous restores during GPU resets and suspend/resumes.
v4: Style fixes.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Wait for HW/PSP initiated ASIC reset to complete before
starting the recovery operations.
v2: Remove typo
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
DPC recovery involves ASIC reset just as normal GPU recovery so block
SW GPU schedulers and wait on all concurrent GPU resets.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
At this point the ASIC is already post reset by the HW/PSP
so the HW not in proper state to be configured for suspension,
some blocks might be even gated and so best is to avoid touching it.
v2: Rename in_dpc to more meaningful name
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add PCI Downstream Port Containment (DPC) with
basic recovery functionality
v2: remove pci_save_state to avoid breaking suspend/resume
v3: Fix style comments
v4: Improve description.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
In function flr_work, we should do gpu recovery when no job
is running. Fix the logic by inverting it.
v2: modify the description
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Liu ChengZhe <ChengZhe.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Instead of letting TTM make an educated guess based on
some mask all drivers should just specify what caching
they want for their CPU mappings.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/390207/
|
|
As far as I can tell this was never used either and we just
always fallback to the order cached > wc > uncached anyway.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/390142/
|
|
Paul Cercueil needs some patches in -rc5 to apply new patches for ingenic
properly.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
|
|
It's not supported to specify more than one of those flags.
So it never made sense to make this a flag in the first place.
Nuke the flags and specify directly which memory type to use.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/389826/?series=81551&rev=1
|
|
Add drm_device argument to drm_prime_pages_to_sg(), so we can
call dma_max_mapping_size() to figure the segment size limit
and call into __sg_alloc_table_from_pages() with the correct
limit.
This fixes virtio-gpu with sev. Possibly it'll fix other bugs
too given that drm seems to totaly ignore segment size limits
so far ...
v2: place max_segment in drm driver not gem object.
v3: move max_segment next to the other gem fields.
v4: just use dma_max_mapping_size().
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20200907112425.15610-2-kraxel@redhat.com
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-next
UAPI Changes:
None
Cross-subsystem Changes:
* Moves a bunch of miscellaneous DP code from the i915 driver into a set
of shared DRM DP helpers
Core Changes:
* New DRM DP helpers (see above)
Driver Changes:
* Implements usage of the aforementioned DP helpers in the nouveau
driver, along with some other various HPD related cleanup for nouveau
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/11e59ebdea7ee4f46803a21fe9b21443d2b9c401.camel@redhat.com
|
|
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200907204630.1406528-9-airlied@gmail.com
|
|
This pattern is cut-n-pasted across 4 drivers, switch it to
a WARN_ON instead, as BUG_ON is considered a bad idea usually.
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200907204630.1406528-2-airlied@gmail.com
|
|
This is used by TTM to communicate the physical address
which should be used with ioremap(), ioremap_wc(). We don't
need to separate the base and offset in any way here.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/389457/
|
|
git://people.freedesktop.org/~agd5f/linux into drm-next
amd-drm-next-5.10-2020-09-03:
amdgpu:
- RAS fixes
- Sienna Cichlid updates
- Navy Flounder updates
- DCE6 (SI) support in DC
- Enable plane rotation
- Rework pre-OS vram reservation handling during driver init
- Add standard interface to dump GPU metrics table from SMU
- Rework tiling and tmz state handling in atomic commits
- Pstate fixes
- Add voltage and power hwmon interfaces for renoir
- SW CTF fixes
- S/G display fix for Raven
- Print client strings for vmfaults for vega and newer
- Manual fan control fixes
- Display updates
- Reorg power management directory structure
- Misc bug fixes
- Misc code cleanups
amdkfd:
- Topology fixes
- Add SMI events for thermal throttling and GPU resets
radeon:
- switch from pci_* to dma_* for dma allocations
- PLL fix
Scheduler:
- Clean up priority levels
UAPI:
- amdgpu INFO IOCTL query update for TMZ state
https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6049
- amdkfd SMI event interface updates
https://github.com/RadeonOpenCompute/rocm_smi_lib/tree/therm_thrott
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200903222921.4152-1-alexander.deucher@amd.com
|
|
Backmerge 5.9-rc4 as there is a nasty qxl conflict
that needs to be resolved.
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
I want to split this structure up and use it differently,
step one remove bdev pointer from it and pass it explicitly.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200826014428.828392-4-airlied@gmail.com
|
|
Print the name of the client rather than the number. This
makes it easier to debug what block is causing the fault.
Reviewed-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Print the name of the client rather than the number. This
makes it easier to debug what block is causing the fault.
Reviewed-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Print the name of the client rather than the number. This
makes it easier to debug what block is causing the fault.
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Print the name of the client rather than the number. This
makes it easier to debug what block is causing the fault.
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
1. gfx_v10_0_soft_reset GRBM_STATUS__SPI_BUSY_MASK
2. gfx_v10_0_update_gfx_clock_gating AMD_CG_SUPPORT_GFX_CGLS
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Ye Bin <yebin10@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
It needs to load renoir_ta firmware because hdcp is enabled by default
for renoir now. This can avoid error:DTM TA is not initialized
Signed-off-by: Changfeng <Changfeng.Zhu@amd.com>
Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Calculate the correct value for max_entries or we might run after the
page_address array.
v2: Xinhui pointed out we don't need the shift
v3: use local copy of start and simplify some calculation
v4: fix the case that we map less VA range than BO size
Signed-off-by: Christian König <christian.koenig@amd.com>
Fixes: 1e691e244487 drm/amdgpu: stop allocating dummy GTT nodes
Reviewed-by: xinhui pan <xinhui.pan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The DRM device is a static member of
the amdgpu device structure and as such
always exists, so long as the PCI and
thus the amdgpu device exist.
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Enable multi-ring ih1 and ih2 for Arcturus only.
For Navi10 family multi-ring has been disabled.
Apparently, having multi-ring enabled in Navi was causing
continus page fault interrupts.
Further investigation is needed to get to the root cause.
Related issue link:
https://gitlab.freedesktop.org/drm/amd/-/issues/1279
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
drm_dev_alloc() alloc *dev* and set managed.final_kfree to dev to free
itself.
Now from commit 5cdd68498918("drm/amdgpu: Embed drm_device into
amdgpu_device (v3)") we alloc *adev* and ddev is just a member of it.
So drm_dev_release try to free a wrong pointer then.
Also driver's release trys to free adev, but drm_dev_release will
access dev after call drvier's release.
To fix it, remove driver's release and set managed.final_kfree to adev.
[ 36.269348] BUG: unable to handle page fault for address: ffffa0c279940028
[ 36.276841] #PF: supervisor read access in kernel mode
[ 36.282434] #PF: error_code(0x0000) - not-present page
[ 36.288053] PGD 676601067 P4D 676601067 PUD 86a414067 PMD 86a247067 PTE 800ffff8066bf060
[ 36.296868] Oops: 0000 [#1] SMP DEBUG_PAGEALLOC NOPTI
[ 36.302409] CPU: 4 PID: 1375 Comm: bash Tainted: G O 5.9.0-rc2+ #46
[ 36.310670] Hardware name: System manufacturer System Product Name/PRIME Z390-A, BIOS 1401 11/26/2019
[ 36.320725] RIP: 0010:drm_managed_release+0x25/0x110 [drm]
[ 36.326741] Code: 80 00 00 00 00 0f 1f 44 00 00 55 48 c7 c2 5a 9f 41 c0 be 00 02 00 00 48 89 e5 41 57 41 56 41 55 41 54 49 89 fc 53 48 83 ec 08 <48> 8b 7f 18 e8 c2 10 ff ff 4d 8b 74 24 20 49 8d 44 24 5
[ 36.347217] RSP: 0018:ffffb9424141fce0 EFLAGS: 00010282
[ 36.352931] RAX: 0000000000000006 RBX: ffffa0c279940010 RCX: 0000000000000006
[ 36.360718] RDX: ffffffffc0419f5a RSI: 0000000000000200 RDI: ffffa0c279940010
[ 36.368503] RBP: ffffb9424141fd10 R08: 0000000000000001 R09: 0000000000000001
[ 36.376304] R10: 0000000000000000 R11: 0000000000000000 R12: ffffa0c279940010
[ 36.384070] R13: ffffffffc0e2a000 R14: ffffa0c26924e220 R15: fffffffffffffff2
[ 36.391845] FS: 00007fc4a277b740(0000) GS:ffffa0c288e00000(0000) knlGS:0000000000000000
[ 36.400669] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 36.406937] CR2: ffffa0c279940028 CR3: 0000000792304006 CR4: 00000000003706e0
[ 36.414732] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 36.422550] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 36.430354] Call Trace:
[ 36.433044] drm_dev_put.part.0+0x40/0x60 [drm]
[ 36.438017] drm_dev_put+0x13/0x20 [drm]
[ 36.442398] amdgpu_pci_remove+0x56/0x60 [amdgpu]
[ 36.447528] pci_device_remove+0x3e/0xb0
[ 36.451807] device_release_driver_internal+0xff/0x1d0
[ 36.457416] device_release_driver+0x12/0x20
[ 36.462094] pci_stop_bus_device+0x70/0xa0
[ 36.466588] pci_stop_and_remove_bus_device_locked+0x1b/0x30
[ 36.472786] remove_store+0x7b/0x90
[ 36.476614] dev_attr_store+0x17/0x30
[ 36.480646] sysfs_kf_write+0x4b/0x60
[ 36.484655] kernfs_fop_write+0xe8/0x1d0
[ 36.488952] vfs_write+0xf5/0x230
[ 36.492562] ksys_write+0x70/0xf0
[ 36.496206] __x64_sys_write+0x1a/0x20
[ 36.500292] do_syscall_64+0x38/0x90
[ 36.504219] entry_SYSCALL_64_after_hwframe+0x44/0xa9
Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Acked-by: Alex Deucher <alexancer.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
When GPU is in reset, its status isn't stable and ring buffer also need
be reset when resuming. Therefore driver should protect GPU recovery
thread from ring buffer accessed by other threads. Otherwise GPU will
randomly hang during recovery.
v2: correct indent
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dennis Li <Dennis.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
On hardware with multiple uvd instances, dependent uvd jobs
may get scheduled to different uvd instances. Because uvd_enc
jobs retain hw context, dependent jobs should always run on the
same uvd instance. This patch disables GPU scheduler's load balancer
for a context that binds jobs from the same context to a uvd
instance.
v2: Squash in uvd_enc fix
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200826014428.828392-2-airlied@gmail.com
|
|
Fixes below compiler warnings:
CC [M] drivers/gpu/drm/amd/amdgpu/amdgpu_device.o
drivers/gpu/drm/amd/amdgpu/amdgpu_device.c:381:1: warning: ‘static’ is not at beginning of declaration [-Wold-style-declaration]
381 | void static inline amdgpu_mm_wreg_mmio(struct amdgpu_device *adev, uint32_t reg, uint32_t v, uint32_t acc_flags)
| ^~~~
drivers/gpu/drm/amd/amdgpu/amdgpu_device.c:381:1: warning: ‘inline’ is not at beginning of declaration [-Wold-style-declaration]
drivers/gpu/drm/amd/amdgpu/amdgpu_device.c: In function ‘amdgpu_device_fini’:
drivers/gpu/drm/amd/amdgpu/amdgpu_device.c:3381:6: warning: variable ‘r’ set but not used [-Wunused-but-set-variable]
3381 | int r;
| ^
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Pull drm fixes from Dave Airlie:
"As expected a bit of an rc3 uptick, amdgpu and msm are the main ones,
one msm patch was from the merge window, but had dependencies and we
dropped it until the other tree had landed. Otherwise it's a couple of
fixes for core, and etnaviv, and single i915, exynos, omap fixes.
I'm still tracking the Sandybridge gpu relocations issue, if we don't
see much movement I might just queue up the reverts. I'll talk to
Daniel next week once he's back from holidays.
core:
- Take modeset bkl for legacy drivers
dp_mst:
- Allow null crtc in dp_mst
i915:
- Fix command parser desc matching with masks
amdgpu:
- Misc display fixes
- Backlight fixes
- MPO fix for DCN1
- Fixes for Sienna Cichlid
- Fixes for Navy Flounder
- Vega SW CTF fixes
- SMU fix for Raven
- Fix a possible overflow in INFO ioctl
- Gfx10 clockgating fix
msm:
- opp/bw scaling patch followup
- frequency restoring fux
- vblank in atomic commit fix
- dpu modesetting fixes
- fencing fix
etnaviv:
- scheduler interaction fix
- gpu init regression fix
exynos:
- Just drop __iommu annotation to fix sparse warning
omap:
- locking state fix"
* tag 'drm-fixes-2020-08-28' of git://anongit.freedesktop.org/drm/drm: (41 commits)
drm/amd/display: Fix memleak in amdgpu_dm_mode_config_init
drm/amdgpu: disable runtime pm for navy_flounder
drm/amd/display: Retry AUX write when fail occurs
drm/amdgpu: Fix buffer overflow in INFO ioctl
drm/amd/powerplay: Fix hardmins not being sent to SMU for RV
drm/amdgpu: use MODE1 reset for navy_flounder by default
drm/amd/pm: correct the thermal alert temperature limit settings
drm/amdgpu: add asd fw check before loading asd
drm/amd/display: Keep current gain when ABM disable immediately
drm/amd/display: Fix passive dongle mistaken as active dongle in EDID emulation
drm/amd/display: Revert HDCP disable sequence change
drm/amd/display: Send DISPLAY_OFF after power down on boot
drm/amdgpu/gfx10: refine mgcg setting
drm/amd/pm: correct Vega20 swctf limit setting
drm/amd/pm: correct Vega12 swctf limit setting
drm/amd/pm: correct Vega10 swctf limit setting
drm/amd/pm: set VCN pg per instances
drm/amd/pm: enable run_btc callback for sienna_cichlid
drivers: gpu: amd: Initialize amdgpu_dm_backlight_caps object to 0 in amdgpu_dm_update_backlight_caps
drm/amd/display: Reject overlay plane configurations in multi-display scenarios
...
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for 5.10:
UAPI Changes:
Cross-subsystem Changes:
Core Changes:
- ttm: various cleanups and reworks of the API
Driver Changes:
- ast: various cleanups
- gma500: A few fixes, conversion to GPIOd API
- hisilicon: Change of maintainer, various reworks
- ingenic: Clock handling and formats support improvements
- mcde: improvements to the DSI support
- mgag200: Support G200 desktop cards
- mxsfb: Support the i.MX7 and i.MX8M and the alpha plane
- panfrost: support devfreq
- ps8640: Retrieve the EDID from eDP control, misc improvements
- tidss: Add a workaround for AM65xx YUV formats handling
- virtio: a few cleanups, support for virtio-gpu exported resources
- bridges: Support the chained bridges on more drivers,
new bridges: Toshiba TC358762, Toshiba TC358775, Lontium LT9611
- panels: Convert to dev_ based logging, read orientation from the DT,
various fixes, new panels: Mantix MLAF057WE51-X, Chefree CH101OLHLWH-002,
Powertip PH800480T013, KingDisplay KD116N21-30NV-A010
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200827155517.do6emeacetpturli@gilmour.lan
|
|
Optimize code to iterate less loops in
amdgpu_device_ip_reinit_early_sriov()
Signed-off-by: Jiawei <Jiawei.Gu@amd.com>
Reviewed-by: Emily.Deng <Emily.Deng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
When resetting EDC related register, all CUs needs to be visited,
otherwise, garbage data from EDC register of missed SEs would present.
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Dennis Li <Dennis.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Disable runtime pm for navy_flounder temporarily.
Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The values for "se_num" and "sh_num" come from the user in the ioctl.
They can be in the 0-255 range but if they're more than
AMDGPU_GFX_MAX_SE (4) or AMDGPU_GFX_MAX_SH_PER_SE (2) then it results in
an out of bounds read.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Virtual display is non-atomic so report false to avoid checking
atomic state and other atomic things at runtime.
v2: squash into the sr-iov check
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Acked-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Switch default gpu reset method to MODE1 for navy_flounder.
Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The ctx->features are new RAS implementation which
is only available for Vega20 and onwards, it is not
available for vega10, vega10 should follow legacy
ECC implementation.
Changed from V1:
wrap function to initialize kfd node properties
Changed from V2:
remove wrap function and SDMA SRAM ECC check
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
asd is not ready for some ASICs in early stage, and psp->asd_fw is more generic than ASIC name in the check.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Jiansong Chen <Jiansong.Chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|