summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/Kconfig
AgeCommit message (Collapse)AuthorFilesLines
2018-10-03drm/fb_helper: Allow leaking fbdev smem_startNeil Armstrong1-0/+20
Since "drm/fb: Stop leaking physical address", the default behaviour of the DRM fbdev emulation is to set the smem_base to 0 and pass the new FBINFO_HIDE_SMEM_START flag. The main reason is to avoid leaking physical addresse to user-space, and it follows a general move over the kernel code to avoid user-space to manipulate physical addresses and then use some other mechanisms like dma-buf to transfer physical buffer handles over multiple subsystems. But, a lot of devices depends on closed sources binaries to enable OpenGL hardware acceleration that uses this smem_start value to pass physical addresses to out-of-tree modules in order to render into these physical adresses. These should use dma-buf buffers allocated from the DRM display device instead and stop relying on fbdev overallocation to gather DMA memory (some HW vendors delivers GBM and Wayland capable binaries, but older unsupported devices won't have these new binaries and are doomed until an Open Source solution like Lima finalizes). Since these devices heavily depends on this kind of software and because the smem_start population was available for years, it's a breakage to stop leaking smem_start without any alternative solutions. This patch adds a Kconfig depending on the EXPERT config and an unsafe kernel module parameter tainting the kernel when enabled. A clear comment and Kconfig help text was added to clarify why and when this patch should be reverted, but in the meantime it's a necessary feature to keep. Cc: Dave Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Noralf Trønnes <noralf@tronnes.org> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Eric Anholt <eric@anholt.net> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Rob Clark <robdclark@gmail.com> Cc: Ben Skeggs <skeggsb@gmail.com> Cc: Christian König <christian.koenig@amd.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Maxime Ripard <maxime.ripard@bootlin.com> Tested-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Dave Airlie <airlied@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/1538136355-15383-1-git-send-email-narmstrong@baylibre.com
2018-08-28drm/amdgpu: Merge amdkfd into amdgpuAmber Lin1-2/+0
Since KFD is only supported by single GPU driver, it makes sense to merge amdgpu and amdkfd into one module. This patch is the initial step: merge Kconfig and Makefile. v2: also remove kfd from drm Kconfig Signed-off-by: Amber Lin <Amber.Lin@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-13drm: add support for DisplayPort CEC-Tunneling-over-AUXHans Verkuil1-0/+10
This adds support for the DisplayPort CEC-Tunneling-over-AUX feature that is part of the DisplayPort 1.3 standard. Unfortunately, not all DisplayPort/USB-C to HDMI adapters with a chip that has this capability actually hook up the CEC pin, so even though a CEC device is created, it may not actually work. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180711132909.25409-2-hverkuil@xs4all.nl
2018-07-09drm: vkms: select DRM_KMS_HELPERArnd Bergmann1-0/+1
Without this, we get link errors during randconfig build: drivers/gpu/drm/vkms/vkms_drv.o:(.rodata+0xa0): undefined reference to `drm_atomic_helper_check' drivers/gpu/drm/vkms/vkms_drv.o:(.rodata+0xa8): undefined reference to `drm_atomic_helper_commit' drivers/gpu/drm/vkms/vkms_plane.o:(.rodata+0x0): undefined reference to `drm_atomic_helper_update_plane' drivers/gpu/drm/vkms/vkms_plane.o:(.rodata+0x8): undefined reference to `drm_atomic_helper_disable_plane' drivers/gpu/drm/vkms/vkms_plane.o:(.rodata+0x18): undefined reference to `drm_atomic_helper_plane_reset' drivers/gpu/drm/vkms/vkms_plane.o:(.rodata+0x28): undefined reference to `drm_atomic_helper_plane_duplicate_state' drivers/gpu/drm/vkms/vkms_plane.o:(.rodata+0x30): undefined reference to `drm_atomic_helper_plane_destroy_state' drivers/gpu/drm/vkms/vkms_output.o:(.rodata+0x1c0): undefined reference to `drm_helper_probe_single_connector_modes' drivers/gpu/drm/vkms/vkms_crtc.o:(.rodata+0x40): undefined reference to `drm_atomic_helper_crtc_reset' drivers/gpu/drm/vkms/vkms_crtc.o:(.rodata+0x70): undefined reference to `drm_atomic_helper_set_config' drivers/gpu/drm/vkms/vkms_crtc.o:(.rodata+0x78): undefined reference to `drm_atomic_helper_page_flip' drivers/gpu/drm/vkms/vkms_crtc.o:(.rodata+0x90): undefined reference to `drm_atomic_helper_crtc_duplicate_state' drivers/gpu/drm/vkms/vkms_crtc.o:(.rodata+0x98): undefined reference to `drm_atomic_helper_crtc_destroy_state' Fixes: 854502fa0a38 ("drm/vkms: Add basic CRTC initialization") Fixes: 1c7c5fd916a0 ("drm/vkms: Introduce basic VKMS driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20180709154901.1989316-1-arnd@arndb.de
2018-07-05drm/vkms: Add extra information about vkmsRodrigo Siqueira1-2/+6
Add the following additional information: authors and description in Kconfig. Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com> Reviewed-by: Haneen Mohammed <hamohammed.sa@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/180770375b0537f1ba1857bdb7fdc71dd201882e.1526514457.git.rodrigosiqueiramelo@gmail.com
2018-07-05drm/vkms: Introduce basic VKMS driverHaneen Mohammed1-0/+6
This patch introduces Virtual Kernel Mode-Setting (VKMS) driver. It creates a very basic kms driver with 1 crtc/encoder/connector/plane. VKMS driver would be useful for testing, or for running X (or similar) on headless machines and be able to still use the GPU. Thus it enables a virtual display without the need for hardware display capability. Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180514143346.GA21695@haneen-vb
2018-05-04drm/selftests: Add drm helper selftestMaarten Lankhorst1-0/+1
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180503112217.37292-6-maarten.lankhorst@linux.intel.com Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2018-05-04drm/selftests: Rename the Kconfig option to CONFIG_DRM_DEBUG_SELFTESTMaarten Lankhorst1-4/+4
We want to add more DRM selftests, and there's not much point in having a Kconfig option for every single one of them, so make a generic one. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180503112217.37292-5-maarten.lankhorst@linux.intel.com [mlankhorst: Fix i915/Kconfig.debug (ickle)] Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2018-05-04drm/v3d: Introduce a new DRM driver for Broadcom V3D V3.x+Eric Anholt1-0/+2
This driver will be used to support Mesa on the Broadcom 7268 and 7278 platforms. V3D 3.3 introduces an MMU, which means we no longer need CMA or vc4's complicated CL/shader validation scheme. This massively changes the GEM behavior, so I've forked off to a new driver. v2: Mark SUBMIT_CL as needing DRM_AUTH. coccinelle fixes from kbuild test robot. Drop personal git link from MAINTAINERS. Don't double-map dma-buf imported BOs. Add kerneldoc about needing MMU eviction. Drop prime vmap/unmap stubs. Delay mmap offset setup to mmap time. Use drm_dev_init instead of _alloc. Use ktime_get() for wait_bo timeouts. Drop drm_can_sleep() usage, since we don't modeset. Switch page tables back to WC (debug change to coherent had slipped in). Switch drm_gem_object_unreference_unlocked() to drm_gem_object_put_unlocked(). Simplify overflow mem handling by not sharing overflow mem between jobs. v3: no changes v4: align submit_cl to 64 bits (review by airlied), check zero flags in other ioctls. Signed-off-by: Eric Anholt <eric@anholt.net> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> (v4) Acked-by: Dave Airlie <airlied@linux.ie> (v3, requested submit_cl change) Link: https://patchwork.freedesktop.org/patch/msgid/20180430181058.30181-3-eric@anholt.net
2018-04-03drm/xen-front: Add support for Xen PV display frontendOleksandr Andrushchenko1-0/+2
Add support for Xen para-virtualized frontend display driver. Accompanying backend [1] is implemented as a user-space application and its helper library [2], capable of running as a Weston client or DRM master. Configuration of both backend and frontend is done via Xen guest domain configuration options [3]. Driver limitations: 1. Only primary plane without additional properties is supported. 2. Only one video mode supported which resolution is configured via XenStore. 3. All CRTCs operate at fixed frequency of 60Hz. 1. Implement Xen bus state machine for the frontend driver according to the state diagram and recovery flow from display para-virtualized protocol: xen/interface/io/displif.h. 2. Read configuration values from Xen store according to xen/interface/io/displif.h protocol: - read connector(s) configuration - read buffer allocation mode (backend/frontend) 3. Handle Xen event channels: - create for all configured connectors and publish corresponding ring references and event channels in Xen store, so backend can connect - implement event channels interrupt handlers - create and destroy event channels with respect to Xen bus state 4. Implement shared buffer handling according to the para-virtualized display device protocol at xen/interface/io/displif.h: - handle page directories according to displif protocol: - allocate and share page directories - grant references to the required set of pages for the page directory - allocate xen balllooned pages via Xen balloon driver with alloc_xenballooned_pages/free_xenballooned_pages - grant references to the required set of pages for the shared buffer itself - implement pages map/unmap for the buffers allocated by the backend (gnttab_map_refs/gnttab_unmap_refs) 5. Implement kernel modesetiing/connector handling using DRM simple KMS helper pipeline: - implement KMS part of the driver with the help of DRM simple pipepline helper which is possible due to the fact that the para-virtualized driver only supports a single (primary) plane: - initialize connectors according to XenStore configuration - handle frame done events from the backend - create and destroy frame buffers and propagate those to the backend - propagate set/reset mode configuration to the backend on display enable/disable callbacks - send page flip request to the backend and implement logic for reporting backend IO errors on prepare fb callback - implement virtual connector handling: - support only pixel formats suitable for single plane modes - make sure the connector is always connected - support a single video mode as per para-virtualized driver configuration 6. Implement GEM handling depending on driver mode of operation: depending on the requirements for the para-virtualized environment, namely requirements dictated by the accompanying DRM/(v)GPU drivers running in both host and guest environments, number of operating modes of para-virtualized display driver are supported: - display buffers can be allocated by either frontend driver or backend - display buffers can be allocated to be contiguous in memory or not Note! Frontend driver itself has no dependency on contiguous memory for its operation. 6.1. Buffers allocated by the frontend driver. The below modes of operation are configured at compile-time via frontend driver's kernel configuration. 6.1.1. Front driver configured to use GEM CMA helpers This use-case is useful when used with accompanying DRM/vGPU driver in guest domain which was designed to only work with contiguous buffers, e.g. DRM driver based on GEM CMA helpers: such drivers can only import contiguous PRIME buffers, thus requiring frontend driver to provide such. In order to implement this mode of operation para-virtualized frontend driver can be configured to use GEM CMA helpers. 6.1.2. Front driver doesn't use GEM CMA If accompanying drivers can cope with non-contiguous memory then, to lower pressure on CMA subsystem of the kernel, driver can allocate buffers from system memory. Note! If used with accompanying DRM/(v)GPU drivers this mode of operation may require IOMMU support on the platform, so accompanying DRM/vGPU hardware can still reach display buffer memory while importing PRIME buffers from the frontend driver. 6.2. Buffers allocated by the backend This mode of operation is run-time configured via guest domain configuration through XenStore entries. For systems which do not provide IOMMU support, but having specific requirements for display buffers it is possible to allocate such buffers at backend side and share those with the frontend. For example, if host domain is 1:1 mapped and has DRM/GPU hardware expecting physically contiguous memory, this allows implementing zero-copying use-cases. Note, while using this scenario the following should be considered: a) If guest domain dies then pages/grants received from the backend cannot be claimed back b) Misbehaving guest may send too many requests to the backend exhausting its grant references and memory (consider this from security POV). Note! Configuration options 1.1 (contiguous display buffers) and 2 (backend allocated buffers) are not supported at the same time. 7. Handle communication with the backend: - send requests and wait for the responses according to the displif protocol - serialize access to the communication channel - time-out used for backend communication is set to 3000 ms - manage display buffers shared with the backend [1] https://github.com/xen-troops/displ_be [2] https://github.com/xen-troops/libxenbe [3] https://xenbits.xen.org/gitweb/?p=xen.git;a=blob;f=docs/man/xl.cfg.pod.5.in;h=a699367779e2ae1212ff8f638eff0206ec1a1cc9;hb=refs/heads/master#l1257 Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20180403112317.28751-2-andr2000@gmail.com
2018-01-25Merge tag 'drm-misc-next-fixes-2018-01-18' of ↵Dave Airlie1-4/+4
git://anongit.freedesktop.org/drm/drm-misc into drm-next Fixes for 4.16: Fixes one Kconfig issue and a enable some panels to work properly. There is also a fix of error code return in sun4i. * tag 'drm-misc-next-fixes-2018-01-18' of git://anongit.freedesktop.org/drm/drm-misc: drm: Fix PANEL_ORIENTATION_QUIRKS breaking the Kconfig DRM menuconfig drm/panel: lvds: Handle the optional regulator case properly drm/sun4i: Fix error code in sun4i_tcon_bind()
2018-01-17drm: Fix PANEL_ORIENTATION_QUIRKS breaking the Kconfig DRM menuconfigHans de Goede1-4/+4
All Kconfig menu menu entries should have a depends on MENU_OPTION, the menu stops after the first Kconfig entry without this depends on. Since the PANEL_ORIENTATION_QUIRKS option is also used outside of DRM, it deliberately does not have a depends on DRM, but this causes all items after it to show as separate items rather then under the DRM menuconfig. This commit moves PANEL_ORIENTATION_QUIRKS to the end of the drm Kconfig file, grouping it with DRM_LIB_RANDOM which also does not depend on DRM, fixing the DRM menuconfig. Fixes: 404d1a3edc38 ("drm: Add panel orientation quirks, v6.") Cc: Chris Wilson <chris@chris-wilson.co.uk> Reported-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180117081032.6411-1-hdegoede@redhat.com
2017-12-21Merge branch 'drm-next-4.16' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie1-0/+5
into drm-next * 'drm-next-4.16' of git://people.freedesktop.org/~agd5f/linux: (171 commits) drm/amdgpu: fix test for shadow page tables drm/amd/display: Expose dpp1_set_cursor_attributes drm/amd/display: Update FMT and OPPBUF functions drm/amd/display: check for null before calling is_blanked drm/amd/display: dal 3.1.27 drm/amd/display: Fix unused variable warnings. drm/amd/display: Only blank DCN when we have set_blank implementation drm/amd/display: Put dcn_mi_registers with other structs drm/amd/display: hubp refactor drm/amd/display: integrating optc pseudocode drm/amd/display: Call validate_fbc should_enable_fbc drm/amd/display: Clean up DCN cursor code drm/amd/display: fix 180 full screen pipe split drm/amd/display: reprogram surface config on scaling change drm/amd/display: Remove dwbc from pipe_ctx drm/amd/display: Use the maximum link setting which EDP reported. drm/amd/display: Add hdr_supported flag drm/amd/display: fix global sync param retrieval when not pipe splitting drm/amd/display: Update HUBP drm/amd/display: fix rotated surface scaling ...
2017-12-07drm: move amd_gpu_scheduler into common locationLucas Stach1-0/+5
This moves and renames the AMDGPU scheduler to a common location in DRM in order to facilitate re-use by other drivers. This is mostly a straight forward rename with no code changes. One notable exception is the function to_drm_sched_fence(), which is no longer a inline header function to avoid the need to export the drm_sched_fence_ops_scheduled and drm_sched_fence_ops_finished structures. Reviewed-by: Chunming Zhou <david1.zhou@amd.com> Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-05drm: Document that drm_panel_orientation_quirks.c is shared with fbdevHans de Goede1-0/+1
Add a comment to the DRM_PANEL_ORIENTATION_QUIRKS documenting that the reason for a separate Kconfig for this is because drm_panel_orientation_quirks.c code is shared with fbdev. Suggested-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20171204223321.15799-1-hdegoede@redhat.com
2017-12-05drm: Add support for a panel-orientation connector property, v6Hans de Goede1-0/+1
On some devices the LCD panel is mounted in the casing in such a way that the up/top side of the panel does not match with the top side of the device (e.g. it is mounted upside-down). This commit adds the necessary infra for lcd-panel drm_connector-s to have a "panel orientation" property to communicate how the panel is orientated vs the casing. Userspace can use this property to check for non-normal orientation and then adjust the displayed image accordingly by rotating it to compensate. Changes in v2: -Store panel_orientation in drm_display_info, so that drm_fb_helper.c can access it easily -Have a single drm_connector_init_panel_orientation_property rather then create and attach functions. The caller is expected to set drm_display_info.panel_orientation before calling this, then this will check for platform specific quirks overriding the panel_orientation and if the panel_orientation is set after this then it will attach the property. Changes in v6: -Use an enum (with kerneldoc) rather then #defines for DRM_MODE_PANEL_ORIENTATION_* Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171125193553.23986-4-hdegoede@redhat.com
2017-12-05drm: Add panel orientation quirks, v6.Hans de Goede1-0/+3
Some x86 clamshell design devices use portrait tablet screens and a display engine which cannot rotate in hardware, so the firmware just leaves things as is and we cannot figure out that the display is oriented non upright from the hardware. So at least on x86, we need a quirk table for this. This commit adds a DMI based quirk table which is initially populated with 5 such devices: Asus T100HA, GPD Pocket, GPD win, I.T.Works TW891 and the VIOS LTH17. This quirk table will be used by the drm code to let userspace know that the display is not mounted upright inside the devices case through a new panel orientation drm-connector property, as well as to tell fbcon to rotate the console so that it shows the right way up. Changes in v5: -Add a kernel-doc comment documenting drm_get_panel_orientation_quirk() -Remove board_* matches from the dmi-matches for the VIOS LTH17 laptop, keeping only the (identical) sys_vendor and product_name matches. This is necessary because an older version of the bios has board_vendor set to VOIS instead of VIOS Changes in v6: -Add reference to added kernel-docs in Documentation/gpu/drm-kms-helpers.rst Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171125193553.23986-3-hdegoede@redhat.com
2017-09-28Merge branch 'drm-next-4.15' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie1-0/+3
into drm-next First feature pull for 4.15. Highlights: - Per VM BO support - Lots of powerplay cleanups - Powerplay support for CI - pasid mgr for kfd - interrupt infrastructure for recoverable page faults - SR-IOV fixes - initial GPU reset for vega10 - prime mmap support - ttm page table debugging improvements - lots of bug fixes * 'drm-next-4.15' of git://people.freedesktop.org/~agd5f/linux: (232 commits) drm/amdgpu: clarify license in amdgpu_trace_points.c drm/amdgpu: Add gem_prime_mmap support drm/amd/powerplay: delete dead code in smumgr drm/amd/powerplay: delete SMUM_FIELD_MASK drm/amd/powerplay: delete SMUM_WAIT_INDIRECT_FIELD drm/amd/powerplay: delete SMUM_READ_FIELD drm/amd/powerplay: delete SMUM_SET_FIELD drm/amd/powerplay: delete SMUM_READ_VFPF_INDIRECT_FIELD drm/amd/powerplay: delete SMUM_WRITE_VFPF_INDIRECT_FIELD drm/amd/powerplay: delete SMUM_WRITE_FIELD drm/amd/powerplay: delete SMU_WRITE_INDIRECT_FIELD drm/amd/powerplay: move macros to hwmgr.h drm/amd/powerplay: move PHM_WAIT_VFPF_INDIRECT_FIELD to hwmgr.h drm/amd/powerplay: move SMUM_WAIT_VFPF_INDIRECT_FIELD_UNEQUAL to hwmgr.h drm/amd/powerplay: move SMUM_WAIT_INDIRECT_FIELD_UNEQUAL to hwmgr.h drm/amd/powerplay: add new helper functions in hwmgr.h drm/amd/powerplay: use SMU_IND_INDEX/DATA_11 pair drm/amd/powerplay: refine powerplay code. drm/amd/powerplay: delete dead code in hwmgr.h drm/amd/powerplay: refine interface in struct pp_smumgr_func ...
2017-09-26drm/amdgpu: Track pending retry faults in IH and VM (v2)Felix Kuehling1-0/+1
IH tracks pending retry faults in a hash table for fast lookup in interrupt context. Each VM has a short FIFO of pending VM faults for processing in a bottom half. The IH prescreening stage adds retry faults and filters out repeated retry interrupts to minimize the impact of interrupt storms. It's the VM's responsibility remove pending faults once they are handled. For now this is only done when the VM is destroyed. v2: - Made the hash table smaller and the FIFO longer. I never want the FIFO to fill up, because that would make prescreen take longer. 128 pending page faults should be enough to keep migrations busy. Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Acked-by: Christian König <christian.koenig@amd.com> (v1) Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-09-26drm/amd: Closed hash table with low overhead (v2)Felix Kuehling1-0/+2
This adds a statically sized closed hash table implementation with low memory and CPU overhead. The API is inspired by kfifo. Storing, retrieving and deleting data does not involve any dynamic memory management, which makes it ideal for use in interrupt context. Static memory usage per entry comprises a 32 or 64 bit hash key, two bits for occupancy tracking and the value size stored in the table. No list heads or pointers are needed. Therefore this data structure should be quite cache-friendly, too. It uses linear probing and lazy deletion. During lookups free space is reclaimed and entries relocated to speed up future lookups. v2: squash in do_div and _BITOPS_LONG_SHIFT fixes Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-09-19drm: handle override and firmware EDID at drm_do_get_edid() levelJani Nikula1-1/+1
Handle debugfs override edid and firmware edid at the low level to transparently and completely replace the real edid. Previously, we practically only used the modes from the override EDID, and none of the other data, such as audio parameters. This change also prevents actual EDID reads when the EDID is to be overridden, but retains the DDC probe. This is useful if the reason for preferring override EDID are problems with reading the data, or corruption of the data. Move firmware EDID loading from helper to core, as the functionality moves to lower level as well. This will result in a change of module parameter from drm_kms_helper.edid_firmware to drm.edid_firmware, which arguably makes more sense anyway. Some future work remains related to override and firmware EDID validation. Like before, no validation is done for override EDID. The firmware EDID is validated separately in the loader. Some unification and deduplication would be in order, to validate all of them at the drm_do_get_edid() level, like "real" EDIDs. v2: move firmware loading to core v3: rebase, commit message refresh Cc: Abdiel Janulgue <abdiel.janulgue@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Tested-by: Abdiel Janulgue <abdiel.janulgue@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Acked-by: Dave Airlie <airlied@gmail.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1e8a710bcac46e5136c1a7b430074893c81f364a.1505203831.git.jani.nikula@intel.com
2017-08-24drm/tve200: Add new driver for TVE200Linus Walleij1-0/+2
This adds a new DRM driver for the Faraday Technology TVE200 block. This "TV Encoder" encodes a ITU-T BT.656 stream and can be found in the StorLink SL3516 (later Cortina Systems CS3516) as well as the Grain Media GM8180. I do not have definitive word from anyone at Faraday that this IP block is theirs, but it bears the hallmark of their 3-digit version code (200) and is used in two SoCs from completely different companies. (Grain Media was fully owned by Faraday until it was transferred to NovoTek this january, and Faraday did lots of work on the StorLink SoCs.) The D-Link DIR-685 uses this in connection with the Ilitek ILI9322 panel driver that supports BT.656 input, while the GM8180 apparently has been used with the Cirrus Logic CS4954 digital video encoder. The oldest user seems to be something called Techwall 2835. This driver is heavily inspired by Eric Anholt's PL111 driver and therefore I have mentioned all the ancestor authors in the header file. Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20170820100557.24991-2-linus.walleij@linaro.org
2017-05-08drm/pl111: Initial drm/kms driver for pl111Tom Cooksey1-0/+2
This is a modesetting driver for the pl111 CLCD display controller found on various ARM platforms such as the Versatile Express. The driver has only been tested on the bcm911360_entphn platform so far, with PRIME-based buffer sharing between vc4 and clcd. It reuses the existing devicetree binding, while not using quite as many of its properties as the fbdev driver does (those are left for future work). v2: Nearly complete rewrite by anholt, cutting 2/3 of the code thanks to DRM core's excellent new helpers. v3: Don't match pl110 any more, don't attach if we don't have a DRM panel, use DRM_GEM_CMA_FOPS, update MAINTAINERS, use the simple display helper, use drm_gem_cma_dumb_create (same as our wrapper). v4: Change the driver's .name to not clash with fbdev in sysfs, drop platform alias, drop redundant "drm" in DRM driver name, hook up .prepare_fb to the CMA helper so that DMA fences should work. v5: Move register definitions inside the driver directory, fix build in COMPILE_TEST and !AMBA mode. v6: Drop TIM2_CLKSEL for now to be consistent with existing DT bindings, switch back to external register definitions. Signed-off-by: Tom Cooksey <tom.cooksey@arm.com> Signed-off-by: Eric Anholt <eric@anholt.net> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> (v5) Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170413031746.12921-2-eric@anholt.net
2017-04-14drm/stm: Add STM32 LTDC driverYannick Fertre1-0/+2
This controller provides output signals to interface directly a variety of LCD and TFT panels. These output signals are: RGB signals (up to 24bpp), vertical & horizontal synchronisations, data enable and the pixel clock. Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Yannick Fertre <yannick.fertre@st.com> Signed-off-by: Eric Anholt <eric@anholt.net> Link: http://patchwork.freedesktop.org/patch/msgid/1492164819-10513-5-git-send-email-yannick.fertre@st.com Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Eric Anholt <eric@anholt.net>
2017-02-27drm/fb-helper: Add multi buffer support for cma fbdevXinliang Liu1-0/+9
This patch add a config to support to create multi buffer for cma fbdev. Such as double buffer and triple buffer. Cma fbdev is convient to add a legency fbdev. And still many Android devices use fbdev now and at least double buffer is needed for these Android devices, so that a buffer flip can be operated. It will need some time for Android device vendors to abondon legency fbdev. So multi buffer for fbdev is needed. Signed-off-by: Xinliang Liu <xinliang.liu@linaro.org> [s.christ@phytec.de: Picking patch from https://lkml.org/lkml/2015/9/14/188] Signed-off-by: Stefan Christ <s.christ@phytec.de> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Dave Airlie <airlied@gmail.com> Tested-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/075ffb50cc16ab055b5d47b30163401bb356ab51.1487175046.git-series.maxime.ripard@free-electrons.com
2017-02-18drm: Add DRM support for tiny LCD displaysNoralf Trønnes1-0/+2
tinydrm provides helpers for very simple displays that can use CMA backed framebuffers and need flushing on changes. Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Thierry Reding <treding@nvidia.com>
2017-01-12drm: fix MMU dependenciesBenjamin Gaignard1-2/+2
DRM_VM and DRM_LEGACY shouldn't be selected if MMU isn't set. Fixes: 62a0d98a188c ("drm: allow to use mmuless SoC") Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1484211456-5759-1-git-send-email-benjamin.gaignard@linaro.org
2017-01-09drm: fix compilations issues introduced by "drm: allow to use mmuless SoC"Benjamin Gaignard1-2/+2
Removing MMU configuration flag from DRM make few automatic build failed when they answer yes to all flags. Add asm/vga.h file on Blackfin architecture to not broke compilation. Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Fixes: 62a0d98a188c ("drm: allow to use mmuless SoC") Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1483789151-6603-1-git-send-email-benjamin.gaignard@linaro.org
2017-01-06drm: allow to use mmuless SoCBenjamin Gaignard1-2/+2
Some SoC without MMU have display driver where a drm/kms driver could be implemented. Before doing such kind of thing drm/kms must allow to use mmuless devices. This patch propose to remove MMU configuration flag and add a cma helper function to help implementing mmuless display driver version 4: - add documentation about drm_gem_cma_get_unmapped_area() - stub it MMU case Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> [danvet: Use recommended struct member references in kernel-doc.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1483521177-21794-4-git-send-email-benjamin.gaignard@linaro.org
2017-01-06drm: compile drm_vm.c only when neededBenjamin Gaignard1-0/+5
drm_vm.c functions are only need for DRM_LEGACY and DRM_NOUVEAU. Use a new DRM_VM to define when drm_vm.c in needed. stub drm_legacy_vma_flush() to avoid compilation issues version 4: - a "config DRM_VM" in Kconfig Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> [danvet: Fix conflict.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2016-12-27drm: Add some kselftests for the DRM range manager (struct drm_mm)Chris Wilson1-0/+15
First we introduce a smattering of infrastructure for writing selftests. The idea is that we have a test module that exercises a particular portion of the exported API, and that module provides a set of tests that can either be run as an ensemble via kselftest or individually via an igt harness (in this case igt/drm_mm). To accommodate selecting individual tests, we export a boolean parameter to control selection of each test - that is hidden inside a bunch of reusable boilerplate macros to keep writing the tests simple. v2: Choose a random random_seed unless one is specified by the user. v3: More parameters to control max_iterations and max_prime of the tests. Testcase: igt/drm_mm Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161222083641.2691-7-chris@chris-wilson.co.uk
2016-12-27drm: Add a simple generator of random permutationsChris Wilson1-0/+4
When testing, we want a random but yet reproducible order in which to process elements. Here we create an array which is a random (using the Tausworthe PRNG) permutation of the order in which to execute. Note these are simple helpers intended to be merged upstream in lib/ v2: Tidier code by David Herrmann v3: Add reminder that this code is intended to be temporary, with at least the bulk of the prandom changes going to lib/ Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: David Herrmann <dh.herrmann@gmail.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161222083641.2691-6-chris@chris-wilson.co.uk
2016-12-08Merge tag 'meson-drm-for-4.10' of github.com:superna9999/linux into drm-nextDave Airlie1-0/+2
Add support for the Amlogic Meson Video Processing Unit - Only CVBS/Composite output for Amlogic Meson GXBB/GXL/GXM SoCs - Add MAINTAINERS entry - Add DT bindings documentation * tag 'meson-drm-for-4.10' of github.com:superna9999/linux: MAINTAINERS: add entry for Amlogic DRM drivers dt-bindings: display: add Amlogic Meson DRM Bindings drm: Add support for Amlogic Meson Graphic Controller
2016-12-06drm: Add new driver for MXSFB controllerMarek Vasut1-0/+2
Add new driver for the MXSFB controller found in i.MX23/28/6SX . The MXSFB controller is a simple framebuffer controller with one parallel LCD output. Unlike the MXSFB fbdev driver that is used on these systems now, this driver uses the DRM/KMS framework. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Shawn Guo <shawnguo@kernel.org>
2016-12-01drm: Add support for Amlogic Meson Graphic ControllerNeil Armstrong1-0/+2
The Amlogic Meson Display controller is composed of several components : DMC|---------------VPU (Video Processing Unit)----------------|------HHI------| | vd1 _______ _____________ _________________ | | D |-------| |----| | | | | HDMI PLL | D | vd2 | VIU | | Video Post | | Video Encoders |<---|-----VCLK | R |-------| |----| Processing | | | | | | osd2 | | | |---| Enci ----------|----|-----VDAC------| R |-------| CSC |----| Scalers | | Encp ----------|----|----HDMI-TX----| A | osd1 | | | Blenders | | Encl ----------|----|---------------| M |-------|______|----|____________| |________________| | | ___|__________________________________________________________|_______________| VIU: Video Input Unit --------------------- The Video Input Unit is in charge of the pixel scanout from the DDR memory. It fetches the frames addresses, stride and parameters from the "Canvas" memory. This part is also in charge of the CSC (Colorspace Conversion). It can handle 2 OSD Planes and 2 Video Planes. VPP: Video Post Processing -------------------------- The Video Post Processing is in charge of the scaling and blending of the various planes into a single pixel stream. There is a special "pre-blending" used by the video planes with a dedicated scaler and a "post-blending" to merge with the OSD Planes. The OSD planes also have a dedicated scaler for one of the OSD. VENC: Video Encoders -------------------- The VENC is composed of the multiple pixel encoders : - ENCI : Interlace Video encoder for CVBS and Interlace HDMI - ENCP : Progressive Video Encoder for HDMI - ENCL : LCD LVDS Encoder The VENC Unit gets a Pixel Clocks (VCLK) from a dedicated HDMI PLL and clock tree and provides the scanout clock to the VPP and VIU. The ENCI is connected to a single VDAC for Composite Output. The ENCI and ENCP are connected to an on-chip HDMI Transceiver. This driver is a DRM/KMS driver using the following DRM components : - GEM-CMA - PRIME-CMA - Atomic Modesetting - FBDev-CMA For the following SoCs : - GXBB Family (S905) - GXL Family (S905X, S905D) - GXM Family (S912) The current driver only supports the CVBS PAL/NTSC output modes, but the CRTC/Planes management should support bigger modes. But Advanced Colorspace Conversion, Scaling and HDMI Modes will be added in a second time. The Device Tree bindings makes use of the endpoints video interface definitions to connect to the optional CVBS and in the future the HDMI Connector nodes. HDMI Support is planned for a next release. Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2016-11-16drm/fence: add in-fences supportGustavo Padovan1-0/+1
There is now a new property called IN_FENCE_FD attached to every plane state that receives sync_file fds from userspace via the atomic commit IOCTL. The fd is then translated to a fence (that may be a fence_array subclass or just a normal fence) and then used by DRM to fence_wait() for all fences in the sync_file to signal. So it only commits when all framebuffers are ready to scanout. v2: Comments by Daniel Vetter: - remove set state->fence = NULL in destroy phase - accept fence -1 as valid and just return 0 - do not call fence_get() - sync_file_fences_get() already calls it - fence_put() if state->fence is already set, in case userspace set the property more than once. v3: WARN_ON if fence is set but state has no FB v4: Comment from Maarten Lankhorst - allow set fence with no related fb v5: rename FENCE_FD to IN_FENCE_FD v6: Comments by Daniel Vetter: - rename plane_state->in_fence back to "fence" - re-introduce WARN_ON if fence set but no fb - rebase after fence -> dma_fence rename v7: Comments by Brian Starkey - set state->fence to NULL when duplicating the state - fail if IN_FENCE_FD was already set v8: rebase against latest drm-misc Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Reviewed-by: Brian Starkey <brian.starkey@arm.com> Reviewed-by: Sean Paul <seanpaul@chromium.org> Tested-by: Robert Foss <robert.foss@collabora.com> [danvet: Rebase onto extracted drm_mode_config.[hc].] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2016-11-11Merge tag 'zxdrm-4.10' of ↵Dave Airlie1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into drm-next ZTE zxdrm driver support for 4.10: This is the initial ZTE VOU display controller DRM/KMS driver. There are still some features to be added, like overlay plane, scaling, and more output devices support. But it's already useful with dual CRTCs and HDMI display working. [airlied: use drm_format_plane_cpp instead of legacy api] * tag 'zxdrm-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: MAINTAINERS: add an entry for ZTE ZX DRM driver drm: zte: add initial vou drm driver dt-bindings: add bindings doc for ZTE VOU display controller
2016-11-09drm: Make DRM_DEBUG_MM depend on STACKTRACE_SUPPORTChris Wilson1-0/+1
0day continues to complain about trying to save a stacktrace for the users of the drm_mm range allocator. This time, it is that m68k has no save_stack_trace(), which is apparently guarded by STACKTRACE_SUPPORT. Make it depend so! Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161109143906.11057-1-chris@chris-wilson.co.uk
2016-11-09drm: Restrict stackdepot usage to builtin drm.koChris Wilson1-1/+1
I misread the kbuild result thinking that we had missed the include (which we had for completeness anyway), what kbuild was actually warning me about was that depot_save_stack was not exported. Temporarily fix this by only selecting STACKDEPOT iff drm.ko is builtin Reported-by: kbuild test robot <fengguang.wu@intel.com> Fixes: 5705670d0463 ("drm: Track drm_mm allocators and show leaks on shutdown") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161108131917.6253-2-chris@chris-wilson.co.uk
2016-11-08drm: Track drm_mm allocators and show leaks on shutdownChris Wilson1-0/+13
We can use the kernel's stack tracer and depot to record the allocation site of every drm_mm user. Then on shutdown, as well as warning that allocated nodes still reside with the drm_mm range manager, we can display who allocated them to aide tracking down the leak. v2: Move Kconfig around so it lies underneath the DRM options submenu. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161031090806.20073-1-chris@chris-wilson.co.uk
2016-11-07drm: zte: add initial vou drm driverShawn Guo1-0/+2
It adds the initial ZTE VOU display controller DRM driver. There are still some features to be added, like overlay plane, scaling, and more output devices support. But it's already useful with dual CRTCs and HDMI monitor working. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2016-08-31Revert "drm: make DRI1 drivers depend on BROKEN"Dave Airlie1-1/+0
This reverts commit d10571fc4fba7d57fb8157f0be61dcbe4a7965ca. This isn't how we get to do this unfortunately. Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-08-31Merge tag 'topic/drm-misc-2016-08-31' of ↵Dave Airlie1-57/+79
git://anongit.freedesktop.org/drm-intel into drm-next More -misc stuff - moar drm_crtc.c split up&documentation - some fixes for the simple kms helpers (Andrea) - I included all the dri1 patches from David - we're not removing any code or drivers, and it seems to have worked as a wake-up call to motivate a few more people to upstream kms conversions for these. Feel free to revert if you disagree strongly. - a few other single patches * tag 'topic/drm-misc-2016-08-31' of git://anongit.freedesktop.org/drm-intel: (24 commits) drm: drm_probe_helper: Fix output_poll_work scheduling drm: bridge/dw-hdmi: Fix colorspace and scan information registers values drm/doc: Polish docs for drm_property&drm_property_blob drm: Unify handling of blob and object properties drm: Extract drm_property.[hc] drm: move drm_mode_legacy_fb_format to drm_fourcc.c drm/doc: Polish docs for drm_mode_object drm: Remove drm_mode_object->atomic_count drm: Extract drm_mode_object.[hc] drm/doc: Polish kerneldoc for encoders drm: Extract drm_encoder.[hc] drm/fb-helper: don't call remove_conflicting_framebuffers for FB=m && DRM=y drm/atomic-helper: Add NO_DISABLE_AFTER_MODESET flag support for plane commit drm/atomic-helper: Disable appropriate planes in disable_planes_on_crtc() drm/atomic-helper: Add atomic_disable CRTC helper callback drm: simple_kms_helper: add support for bridges drm: simple_kms_helper: make connector optional at init time drm/bridge: introduce bridge detaching mechanism drm/simple-helpers: Always add planes to the state update drm: reduce GETCLIENT to a minimum ...
2016-08-25drm: make DRI1 drivers depend on BROKENDavid Herrmann1-0/+1
The legacy DRI1 drivers expose highly broken interfaces to user-space. No modern system should enable them, or you will effectively allow user-space to circumvent most of your kernel security measures. The DRI1 kernel APIs are simply broken. User-space can always use vesafb/efifb/simplefb and friends to get working graphics. Lets hide the old drivers behind CONFIG_BROKEN. In case they turn out to be still used (really?), we can easily revert this and figure out a way to move them out of sight (e.g., moving all DRI1 drivers to drivers/gpu/dri1/). Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20160804080657.9664-2-dh.herrmann@gmail.com
2016-08-25drm: hide legacy drivers with CONFIG_DRM_LEGACYDavid Herrmann1-57/+78
Lets move forward and hide the remaining DRI1 drivers behind a config option, so we have a central place to disable them all. Furthermore, we can provide a clear warning to anyone enabling them. Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20160804080657.9664-1-dh.herrmann@gmail.com
2016-08-25Merge branch 'drm-next-4.9' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie1-3/+0
into drm-next First drm-next pull for radeon and amdgpu for 4.9. Highlights: - powerplay support for iceland asics - improved GPU reset (both full asic and per block) - UVD and VCE powergating for CZ and ST - VCE clockgating for CZ and ST - Support for pre-initialized (e.g., zeroed) vram buffers - ttm cleanups - virtual display support - core and radeon/amdgpu support for page_flip_target - lots of bug fixes and clean ups * 'drm-next-4.9' of git://people.freedesktop.org/~agd5f/linux: (171 commits) drm/amdgpu: use memcpy_toio for VCE firmware upload drm/amdgpu: use memcpy_to/fromio for UVD fw upload drm/amd/powerplay: delete useless code in iceland_hwmgr.c. drm/radeon: switch UVD code to use UVD_NO_OP for padding drm/amdgpu: switch UVD code to use UVD_NO_OP for padding drm/radeon: add support for UVD_NO_OP register drm/amdgpu: add support for UVD_NO_OP register drm/amdgpu: fix VCE ib alignment value drm/amdgpu: fix IB alignment for UVD drm/amd/amdgpu: Print ring name in amdgpu_ib_schedule() drm/radeon: remove dead code, si_mc_load_microcode (v2) drm/radeon/cik: remove dead code (v2) drm/amd/powerplay: avoid NULL dereference, cz_hwmgr.c drm/amd/powerplay: avoid NULL pointer dereference drm/amdgpu/gmc8: remove dead code (v2) drm/amdgpu/gmc7: remove dead code (v2) drm/amdgpu: Fix indentation in dce_v8_0_audio_write_sad_regs() drm/amdgpu: Use correct mask in dce_v8_0_afmt_setmode() and fix comment typos. drm/amdgpu: cleanup amdgpu_vm_bo_update params drm/amdgpu: stop adding dummy entry in amdgpu_ttm_placement_init ...
2016-08-12drm/radeon|amgpu: Make fbdev emulation optionalDaniel Vetter1-8/+0
Seems to at least compile fine, only change needed was to use the fb_set_suspend helper. Cc: alexander.deucher@amd.com Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1470847958-28465-5-git-send-email-daniel.vetter@ffwll.ch
2016-08-08drm/amdgpu: move all Kconfig options to amdgpu/KconfigAlex Deucher1-3/+0
For consistency. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-05-06drm/mediatek: Add DRM Driver for Mediatek SoC MT8173.CK Hu1-0/+2
This patch adds an initial DRM driver for the Mediatek MT8173 DISP subsystem. It currently supports two fixed output streams from the OVL0/OVL1 sources to the DSI0/DPI0 sinks, respectively. Signed-off-by: CK Hu <ck.hu@mediatek.com> Signed-off-by: YT Shen <yt.shen@mediatek.com> Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com> Signed-off-by: Mao Huang <littlecvr@chromium.org> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-05-05Merge tag 'topic/drm-misc-2016-05-04' of ↵Dave Airlie1-0/+1
git://anongit.freedesktop.org/drm-intel into drm-next Ofc I promise just a few leftovers for drm-misc and somehow it's the biggest pull. But really mostly trivial stuff: - MAINTAINERS updates from Emil - rename async to nonblock in atomic_commit to avoid the confusion between nonblocking ioctl and async flip (= not vblank synced), from Maarten. Needs to be regened with newer drivers, but probably only after -rc1 to catch them all. - actually lockless gem_object_free, plus acked driver conversion patches. All the trickier prep stuff already is in drm-next. - Noralf's nice work for generic defio support in our fbdev emulation. Keeps the udl hack, and qxl is tested by Gerd. * tag 'topic/drm-misc-2016-05-04' of git://anongit.freedesktop.org/drm-intel: (47 commits) drm: Fixup locking WARN_ON mistake around gem_object_free_unlocked drm/etnaviv: Use lockless gem BO free callback drm/imx: Use lockless gem BO free callback drm/radeon: Use lockless gem BO free callback drm/amdgpu: Use lockless gem BO free callback drm/gem: support BO freeing without dev->struct_mutex MAINTAINERS: Add myself for the new VC4 (RPi GPU) graphics driver. MAINTAINERS: Add a bunch of legacy (UMS) DRM drivers MAINTAINERS: Add a few DRM drivers by Dave Airlie MAINTAINERS: List the correct git repo for the Renesas DRM drivers MAINTAINERS: Update the files list for the Renesas DRM drivers MAINTAINERS: Update the files list for the Armada DRM driver MAINTAINERS: Update the files list for the Rockchip DRM driver MAINTAINERS: Update the files list for the Exynos DRM driver MAINTAINERS: Add maintainer entry for the VMWGFX DRM driver MAINTAINERS: Add maintainer entry for the MSM DRM driver MAINTAINERS: Add maintainer entry for the Nouveau DRM driver MAINTAINERS: Update the files list for the Etnaviv DRM driver MAINTAINERS: Remove unneded wildcard for the i915 DRM driver drm/atomic: Add WARN_ON when state->acquire_ctx is not set. ...
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-11 17:40:15 +0300