summaryrefslogtreecommitdiff
path: root/drivers/gpio
AgeCommit message (Collapse)AuthorFilesLines
2020-09-30gpiolib: cdev: support edge detection for uAPI v2Kent Gibson3-0/+281
Add support for edge detection to lines requested using GPIO_V2_GET_LINE_IOCTL. The edge_detector implementation is based on the v1 lineevent implementation. Unlike the v1 implementation, an overflow of the event buffer results in discarding older events, rather than the most recent, so the final event in a burst will correspond to the current state of the line. Signed-off-by: Kent Gibson <warthog618@gmail.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-09-30gpiolib: cdev: support GPIO_V2_GET_LINEINFO_IOCTL and ↵Kent Gibson1-28/+168
GPIO_V2_GET_LINEINFO_WATCH_IOCTL Add support for GPIO_V2_GET_LINEINFO_IOCTL and GPIO_V2_GET_LINEINFO_WATCH_IOCTL. The core of this change is the event kfifo switching to contain struct gpioline_info_changed_v2, instead of v1 as v2 is richer. The two uAPI versions are mostly independent - other than where they both provide line info changes via reads on the chip fd. As the info change structs differ between v1 and v2, the infowatch implementation tracks which version of the infowatch ioctl, either GPIO_GET_LINEINFO_WATCH_IOCTL or GPIO_V2_GET_LINEINFO_WATCH_IOCTL, initiates the initial watch and returns the corresponding info change struct to the read. The version supported on that fd locks to that version on the first watch request, so subsequent watches from that process must use the same uAPI version. Signed-off-by: Kent Gibson <warthog618@gmail.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-09-30gpiolib: cdev: support GPIO_V2_GET_LINE_IOCTL and GPIO_V2_LINE_GET_VALUES_IOCTLKent Gibson1-0/+424
Add support for requesting lines using the GPIO_V2_GET_LINE_IOCTL, and returning their current values using GPIO_V2_LINE_GET_VALUES_IOCTL. The struct linereq implementation is based on the v1 struct linehandle implementation. Signed-off-by: Kent Gibson <warthog618@gmail.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-09-30gpiolib: add build option for CDEV v1 ABIKent Gibson1-0/+12
Add a build option to allow the removal of the CDEV v1 ABI. Suggested-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Kent Gibson <warthog618@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-09-30gpiolib: make cdev a build optionKent Gibson3-3/+31
Make the gpiolib-cdev module a build option. This allows the CDEV interface to be removed from the kernel to reduce kernel size in applications where is it not required, and provides the parent for other CDEV interface specific build options to follow. Suggested-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Kent Gibson <warthog618@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-09-30gpiolib: cdev: replace strncpy() with strscpy()Kent Gibson1-16/+7
Replace usage of strncpy() with strscpy() to remove -Wstringop-truncation warnings. The structures being populated are zeroed, to prevent stack leakage as they are returned to userspace, so strscpy() performs the equivalent function without the warnings. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Kent Gibson <warthog618@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-09-30gpiolib: cdev: gpio_desc_to_lineinfo() should set info offsetKent Gibson1-1/+2
Set the value of the line info offset in gpio_desc_to_lineinfo(), rather than relying on it being passed in the info. This makes the function behave as you would expect from the name - it generates the line info corresponding to a given GPIO desc. Signed-off-by: Kent Gibson <warthog618@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-09-30gpio: mockup: refactor the module init functionBartosz Golaszewski1-47/+49
Let's move the code preparing the device properties into a separate routine. This has the advantage of simplifying the error handling and makes the indentation less deep. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-09-30gpio: mockup: use the generic 'gpio-line-names' propertyBartosz Golaszewski1-32/+38
GPIO line names are currently created by the driver from the chip label. We'll want to support custom formats for line names (for instance: to name all lines the same) for user-space tests so create them in the module init function and pass them to the driver using the standard 'gpio-line-names' property. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-09-30gpio: mockup: pass the chip label as device propertyBartosz Golaszewski1-9/+8
While we do check the "chip-name" property in probe(), we never actually use it. Let's pass the chip label to the driver using device properties as we'll want to allow users to define their own once dynamically created chips are supported. The property is renamed to "chip-label" to not cause any confusion with the actual chip name which is of the form: "gpiochipX". If the "chip-label" property is missing, let's do what most devices in drivers/gpio/ do and use dev_name(). Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-09-30gpio: mockup: increase the number of supported device propertiesBartosz Golaszewski1-2/+2
The driver actually supports 4 properties but we only ever set up up to three. This will change however in upcoming patches so increase the number of really (as in: the number the property array can hold) supported properties to 4. Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-09-30gpio: mockup: remove unneeded return statementBartosz Golaszewski1-2/+0
There's a return; at the end of a void function. This is not needed so remove it. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-09-30gpio: mockup: use pr_fmt()Bartosz Golaszewski1-4/+4
We don't need a custom logging helper. Let's use the standard pr_fmt() macro which allows us to use all pr_*() routines with custom format. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-09-30gpio: mockup: use KBUILD_MODNAMEBartosz Golaszewski1-4/+3
Drop the definition for the driver name. Let's use KBUILD_MODNAME for the log format and use the "gpio-mockup" value directly in the only place where it's relevant: in the name of the device. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-09-30gpio: mockup: drop unneeded includesBartosz Golaszewski1-2/+0
This module doesn't need gpio/consumer.h - it's a provider. It also doesn't use any symbols from init.h so let's remove both includes. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-09-30gpio: mpc8xxx: simplify ls1028a/ls1088a supportMichael Walle1-33/+12
Some Layerscape/QoriQ SoCs have input buffers which needs to be enabled first. This was done in two different ways in the driver. Unify it. This was tested on a LS1028A SoC. Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-09-30gpio: mockup: fix resource leak in error pathBartosz Golaszewski1-0/+2
If the module init function fails after creating the debugs directory, it's never removed. Add proper cleanup calls to avoid this resource leak. Fixes: 9202ba2397d1 ("gpio: mockup: implement event injecting over debugfs") Cc: <stable@vger.kernel.org> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-09-29gpio: mxc: Support module buildAnson Huang2-1/+7
Change config to tristate, add module device table, module author, description and license to support module build for i.MX GPIO driver. As this is a SoC GPIO module, it provides common functions for most of the peripheral devices, such as GPIO pins control, secondary interrupt controller for GPIO pins IRQ etc., without GPIO driver, most of the peripheral devices will NOT work properly, so GPIO module is similar with clock, pinctrl driver that should be loaded ONCE and never unloaded. Since MXC GPIO driver needs to have init function to register syscore ops once, here still use subsys_initcall(), NOT module_platform_driver(). Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Link: https://lore.kernel.org/r/1600320829-1453-1-git-send-email-Anson.Huang@nxp.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-09-28gpio: amd-fch: correct logic of GPIO_LINE_DIRECTIONEd Wildgoose1-1/+1
The original commit appears to have the logic reversed in amd_fch_gpio_get_direction. Also confirmed by observing the value of "direction" in the sys tree. Signed-off-by: Ed Wildgoose <lists@wildgooses.com> Fixes: e09d168f13f0 ("gpio: AMD G-Series PCH gpio driver") Cc: stable@vger.kernel.org Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-09-24gpio: aspeed: fix ast2600 bank propertiesTao Ren1-2/+2
GPIO_U is mapped to the least significant byte of input/output mask, and the byte in "output" mask should be 0 because GPIO_U is input only. All the other bits need to be 1 because GPIO_V/W/X support both input and output modes. Similarly, GPIO_Y/Z are mapped to the 2 least significant bytes, and the according bits need to be 1 because GPIO_Y/Z support both input and output modes. Fixes: ab4a85534c3e ("gpio: aspeed: Add in ast2600 details to Aspeed driver") Signed-off-by: Tao Ren <rentao.bupt@gmail.com> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-09-24gpio/aspeed-sgpio: don't enable all interrupts by defaultJeremy Kerr1-5/+3
Currently, the IRQ setup for the SGPIO driver enables all interrupts in dual-edge trigger mode. Since the default handler is handle_bad_irq, any state change on input GPIOs will trigger bad IRQ warnings. This change applies sensible IRQ defaults: single-edge trigger, and all IRQs disabled. Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au> Fixes: 7db47faae79b ("gpio: aspeed: Add SGPIO driver") Reviewed-by: Joel Stanley <joel@jms.id.au> Acked-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-09-24gpio/aspeed-sgpio: enable access to all 80 input & output sgpiosJeremy Kerr1-42/+84
Currently, the aspeed-sgpio driver exposes up to 80 GPIO lines, corresponding to the 80 status bits available in hardware. Each of these lines can be configured as either an input or an output. However, each of these GPIOs is actually an input *and* an output; we actually have 80 inputs plus 80 outputs. This change expands the maximum number of GPIOs to 160; the lower half of this range are the input-only GPIOs, the upper half are the outputs. We fix the GPIO directions to correspond to this mapping. This also fixes a bug when setting GPIOs - we were reading from the input register, making it impossible to set more than one output GPIO. Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au> Fixes: 7db47faae79b ("gpio: aspeed: Add SGPIO driver") Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-09-24gpio: pca953x: Fix uninitialized pending variableYe Li1-1/+1
When pca953x_irq_pending returns false, the pending parameter won't be set. But pca953x_irq_handler continues using this uninitialized variable as pending irqs and will cause problem. Fix the issue by initializing pending to 0. Fixes: 064c73afe738 ("gpio: pca953x: Synchronize interrupt handler properly") Signed-off-by: Ye Li <ye.li@nxp.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-09-22Merge tag 'gpio-updates-for-v5.10-part1' of ↵Linus Walleij14-161/+181
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into devel gpio updates for v5.10 - part 1 - automatically drive GPHY leds in gpio-stp-xway - refactor ->{get, set}_multiple() in gpio-aggregator - add support for a new model in rcar-gpio DT bindings - simplify several GPIO drivers with dev_err_probe() - disable Direct KBD interrupts in gpio-tc35894 - use DEFINE_SEQ_ATTRIBUTE() in GPIO chardev to shrink code - switch to using a simpler IDA API in gpiolib - make devprop_gpiochip_set_names() more generic by using device properties instead of using fwnode helpers
2020-09-17gpio: Add support for the sl28cpld GPIO controllerMichael Walle3-0/+174
Add support for the GPIO controller of the sl28 board management controller. This driver is part of a multi-function device. A controller has 8 lines. There are three different flavors: full-featured GPIO with interrupt support, input-only and output-only. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-09-17gpiolib: check for parent device in devprop_gpiochip_set_names()Bartosz Golaszewski1-0/+4
It's possible for a GPIO chip to not have a parent device (whose properties we inspect for 'gpio-line-names'). In this case we should simply return from devprop_gpiochip_set_names(). Add an appropriate check for this use-case. Fixes: 7cba1a4d5e16 ("gpiolib: generalize devprop_gpiochip_set_names() for device properties") Reported-by: Anders Roxell <anders.roxell@linaro.org> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Anders Roxell <anders.roxell@linaro.org> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-09-17gpiolib: Fix line event handling in syscall compatible modeAndy Shevchenko1-4/+30
The introduced line event handling ABI in the commit 61f922db7221 ("gpio: userspace ABI for reading GPIO line events") missed the fact that 64-bit kernel may serve for 32-bit applications. In such case the very first check in the lineevent_read() will fail due to alignment differences. To workaround this introduce lineevent_get_size() helper which returns actual size of the structure in user space. Fixes: 61f922db7221 ("gpio: userspace ABI for reading GPIO line events") Suggested-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Kent Gibson <warthog618@gmail.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-09-14gpiolib: unexport devprop_gpiochip_set_names()Bartosz Golaszewski3-64/+47
Now that devprop_gpiochip_set_names() is only used in a single place inside drivers/gpio/gpiolib.c, there's no need anymore for it to be exported or to even live in its own source file. Pull this function into the core source file for gpiolib. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-09-14gpiolib: generalize devprop_gpiochip_set_names() for device propertiesBartosz Golaszewski4-22/+14
devprop_gpiochip_set_names() is overly complicated with taking the fwnode argument (which requires using dev_fwnode() & of_fwnode_handle() in ACPI and OF GPIO code respectively). Let's just switch to using the generic device properties. This allows us to pull the code setting line names directly into gpiochip_add_data_with_key() instead of handling it separately for ACPI and OF. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-09-14gpiolib: switch to simpler IDA interfaceBartosz Golaszewski1-3/+3
We don't need to specify any ranges when allocating IDs so we can switch to ida_alloc() and ida_free() instead of the ida_simple_ counterparts. ida_simple_get(ida, 0, 0, gfp) is equivalent to ida_alloc_range(ida, 0, UINT_MAX, gfp) which is equivalent to ida_alloc(ida, gfp). Note: IDR will never actually allocate an ID larger than INT_MAX. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-09-11gpiolib: convert to use DEFINE_SEQ_ATTRIBUTE macroAndy Shevchenko1-16/+3
Use DEFINE_SEQ_ATTRIBUTE macro to simplify the code. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-09-09gpio: mockup: fix resource leak in error pathBartosz Golaszewski1-0/+2
If the module init function fails after creating the debugs directory, it's never removed. Add proper cleanup calls to avoid this resource leak. Fixes: 9202ba2397d1 ("gpio: mockup: implement event injecting over debugfs") Cc: <stable@vger.kernel.org> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-09-09gpio: siox: explicitly support only threaded irqsAhmad Fatoum1-0/+1
The gpio-siox driver uses handle_nested_irq() to implement its interrupt support. This is only capable of handling threaded irq actions. For a hardirq action it triggers a NULL pointer oops. (It calls action->thread_fn which is NULL then.) Prevent registration of a hardirq action by setting gpio_irq_chip::threaded to true. Cc: u.kleine-koenig@pengutronix.de Fixes: be8c8facc707 ("gpio: new driver to work with a 8x12 siox") Cc: stable@vger.kernel.org Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-09-09gpio: tc35894: Disable Direct KBD interrupts to enable gpio irqdillon min1-2/+16
On tc35894, have to disable direct keypad interrupts to make it as general purpose interrupts functionality work. if not, after chip reset, IRQST(0x91) will always 0x20, IRQN always low level, can't be clear. Configure DIRECTx to enable general purpose gpio mode, else read GPIOMISx register always zero in irq routine. verified on tc35894, need more test on other tc3589x. Signed-off-by: dillon min <dillon.minfei@gmail.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-09-09gpio: tc35894: fix up tc35894 interrupt configurationdillon min1-1/+1
The offset of regmap is incorrect, j * 8 is move to the wrong register. for example: asume i = 0, j = 1. we want to set KPY5 as interrupt falling edge mode, regmap[0][1] should be TC3589x_GPIOIBE1 0xcd but, regmap[i] + j * 8 = TC3589x_GPIOIBE0 + 8 ,point to 0xd4, this is TC3589x_GPIOIE2 not TC3589x_GPIOIBE1. Fixes: d88b25be3584 ("gpio: Add TC35892 GPIO driver") Cc: Cc: stable@vger.kernel.org Signed-off-by: dillon min <dillon.minfei@gmail.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-08-31gpio: sprd: Clear interrupt when setting the type as edgeTaiping Lai1-0/+3
The raw interrupt status of GPIO maybe set before the interrupt is enabled, which would trigger the interrupt event once enabled it from user side. This is the case for edge interrupts only. Adding a clear operation when setting interrupt type can avoid that. There're a few considerations for the solution: 1) This issue is for edge interrupt only; The interrupts requested by users are IRQ_TYPE_LEVEL_HIGH as default, so clearing interrupt when request is useless. 2) The interrupt type can be set to edge when request and following up with clearing it though, but the problem is still there once users set the interrupt type to level trggier. 3) We can add a clear operation after each time of setting interrupt enable bit, but it is redundant for level trigger interrupt. Therefore, the solution is this patch seems the best for now. Fixes: 9a3821c2bb47 ("gpio: Add GPIO driver for Spreadtrum SC9860 platform") Signed-off-by: Taiping Lai <taiping.lai@unisoc.com> Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com> Reviewed-by: Baolin Wang <baolin.wang7@gmail.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-08-28gpio: zynq: Simplify with dev_err_probe()Krzysztof Kozlowski1-5/+3
Common pattern of handling deferred probe can be simplified with dev_err_probe(). Less code and also it prints the error value. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-08-28gpio: pisosr: Simplify with dev_err_probe()Krzysztof Kozlowski1-6/+3
Common pattern of handling deferred probe can be simplified with dev_err_probe(). Less code and also it prints the error value. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-08-28gpio: pca953x: Simplify with dev_err_probe()Krzysztof Kozlowski1-6/+3
Common pattern of handling deferred probe can be simplified with dev_err_probe(). Less code and also it prints the error value. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-08-28gpio: omap: Simplify with dev_err_probe()Krzysztof Kozlowski1-4/+1
Common pattern of handling deferred probe can be simplified with dev_err_probe(). Less code and also it prints the error value. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-08-28gpio: davinci: Simplify with dev_err_probe()Krzysztof Kozlowski1-6/+2
Common pattern of handling deferred probe can be simplified with dev_err_probe(). Less code and also it prints the error value. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-08-28gpio: bcm-kona: Simplify with dev_err_probe()Krzysztof Kozlowski1-4/+1
Common pattern of handling deferred probe can be simplified with dev_err_probe(). Less code and also it prints the error value. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-08-27gpio: dwapb: Use resource managed GPIO-chip add data methodSerge Semin1-35/+2
Since the resource managed version of gpiochip_add_data() will handle the GPIO-chip data automated cleanup we can freely remove the DW APB GPIO driver code responsible for that. After doing so the DW APB GPIO driver removal callback can be also fully discarded since there is nothing left to be done for it. All the cleanups are now performed by means of the device managed framework. Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20200730152808.2955-11-Sergey.Semin@baikalelectronics.ru Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-08-27gpio: dwapb: Get clocks by means of resource managed interfaceSerge Semin1-16/+32
The kernel clock framework provides the resource managed version of the clk_bulk_get() method. The only thing which needs to be also automated is the clocks disable/unprepare procedure executed on the device removal. It can be implemented by means of the custom action definition. After that the clocks acquisition and release will be purely managed by the device resources interface. Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20200730152808.2955-10-Sergey.Semin@baikalelectronics.ru Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-08-27gpio: dwapb: Get reset control by means of resource managed interfaceSerge Semin1-6/+29
The reset control interface provides the resource managed version of the reset_control_get() method. The only thing which needs to be also automated is the reset lane assertion on the device removal. It can be implemented by means of the custom action definition. After that the reset control will be purely managed by the device resources interface. Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20200730152808.2955-9-Sergey.Semin@baikalelectronics.ru Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-08-27gpio: dwapb: Discard ACPI GPIO-chip IRQs requestSerge Semin1-4/+0
Since GPIOlib-based IRQ-chip interface is now utilized there is no need in calling the methods acpi_gpiochip_{request,free}_interrupts() here. They will be called from gpiochip_add_irqchip()/gpiochip_irqchip_remove() anyway. Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20200730152808.2955-8-Sergey.Semin@baikalelectronics.ru Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-08-27gpio: dwapb: Discard GPIO-to-IRQ mapping functionSerge Semin1-10/+0
Since GPIOlib-based IRQ-chip interface is now utilized there is no need in setting up a custom GPIO-to-IRQ mapping method. GPIO-lib defines the standard mapping method - gpiochip_to_irq(), which will be used anyway no matter whether the custom to_irq callback is specified or not. Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20200730152808.2955-7-Sergey.Semin@baikalelectronics.ru Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-08-27gpio: dwapb: Convert driver to using the GPIO-lib-based IRQ-chipSerge Semin2-94/+111
GPIO-lib provides a ready-to-use interface to initialize an IRQ-chip on top of a GPIO chip. It's better from maintainability and readability point of view to use one instead of supporting a hand-written Generic IRQ-chip-based implementation. Moreover the new implementation won't cause much functional overhead but will provide a cleaner driver code. All of that makes the DW APB GPIO driver conversion pretty much justified especially seeing a tendency of the other GPIO drivers getting converted too. Here is what we do in the framework of this commit to convert the driver to using the GPIO-lib-based IRQ-chip interface: 1) IRQ ack, mask and unmask callbacks are locally defined instead of using the Generic IRQ-chip ones. 2) An irq_chip structure instance is embedded into the dwapb_gpio private data. Note we can't have a static instance of that structure since GPIO-lib will add some hooks into it by calling gpiochip_set_irq_hooks(). A warning about that would have been printed by the GPIO-lib code if we used a single irq_chip structure instance for multiple DW APB GPIO controllers. 3) Initialize the gpio_irq_chip structure embedded into the gpio_chip descriptor. By default there is no IRQ enabled so any event raised will be handled by the handle_bad_irq() IRQ flow handler. If DW APB GPIO IP-core is synthesized to have non-shared reference IRQ-lines, then as before the hierarchical and cascaded cases are distinguished by checking how many parental IRQs are defined. (Note irq_set_chained_handler_and_data() won't initialize IRQs, which descriptors couldn't be found.) If DW APB GPIO IP is used on a platform with shared IRQ line, then we simply won't let the GPIO-lib to initialize the parental IRQs, but will handle them locally in the driver. 4) Discard linear IRQ-domain and Generic IRQ-chip initialization, since GPIO-lib IRQ-chip interface will create a new domain and accept a standard IRQ-chip structure pointer based on the setting we provided in the gpio_irq_chip structure. 5) Manually select a proper IRQ flow handler directly in the irq_set_type() callback by calling irq_set_handler_locked() method, since an ordinary (not Generic) irq_chip descriptor is now utilized. Note this shalln't give any regression 6) Alter CONFIG_GPIO_DWAPB kernel config to select CONFIG_GPIOLIB_IRQCHIP instead of CONFIG_GENERIC_IRQ_CHIP. Note neither 4) nor 5) shall cause a regression of commit 6a2f4b7dadd5 ("gpio: dwapb: use a second irq chip"), since the later isn't properly used here anyway. Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20200730152808.2955-6-Sergey.Semin@baikalelectronics.ru Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-08-27gpio: dwapb: Add max GPIOs macroSerge Semin1-4/+4
Add a new macro DWAPB_MAX_GPIOS which defines the maximum possible number of GPIO lines corresponding to the maximum DW APB GPIO controller port width. Use the new macro instead of number literal 32 where it's applicable. Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20200730152808.2955-5-Sergey.Semin@baikalelectronics.ru Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-08-27gpio: dwapb: Move MFD-specific IRQ handlerSerge Semin1-5/+5
For better readability let's group all the IRQ handlers in a single place of the driver instead of having them scatter around all over the file. Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20200730152808.2955-4-Sergey.Semin@baikalelectronics.ru Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-26 20:05:09 +0300