summaryrefslogtreecommitdiff
path: root/drivers/gpio
AgeCommit message (Collapse)AuthorFilesLines
2020-01-27gpio/aspeed: Fix incorrect number of banksRashmica Gupta1-1/+1
[ Upstream commit 3c4710ae6f883f9c6e3df5e27e274702a1221c57 ] The current calculation for the number of GPIO banks is only correct if the number of GPIOs is a multiple of 32 (if there were 31 GPIOs we would currently say there are 0 banks, which is incorrect). Fixes: 361b79119a4b7 ('gpio: Add Aspeed driver') Signed-off-by: Rashmica Gupta <rashmica.g@gmail.com> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/20190906062623.13354-1-rashmica.g@gmail.com Reviewed-by: Joel Stanley <joel@jms.d.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-17gpio: mpc8xxx: Add platform device to gpiochip->parentJohnson CH Chen (陳昭勳)1-0/+1
[ Upstream commit 322f6a3182d42df18059a89c53b09d33919f755e ] Dear Linus Walleij, In old kernels, some APIs still try to use parent->of_node from struct gpio_chip, and it could be resulted in kernel panic because parent is NULL. Adding platform device to gpiochip->parent can fix this problem. Signed-off-by: Johnson Chen <johnsonch.chen@moxa.com> Link: https://patchwork.kernel.org/patch/11234609 Link: https://lore.kernel.org/r/HK0PR01MB3521489269F76467DFD7843FFA450@HK0PR01MB3521.apcprd01.prod.exchangelabs.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-17gpio: Fix error message on out-of-range GPIO in lookup tableGeert Uytterhoeven1-2/+3
commit d935bd50dd14a7714cbdba9a76435dbb56edb1ae upstream. When a GPIO offset in a lookup table is out-of-range, the printed error message (1) does not include the actual out-of-range value, and (2) contains an off-by-one error in the upper bound. Avoid user confusion by also printing the actual GPIO offset, and correcting the upper bound of the range. While at it, use "%u" for unsigned int. Sample impact: -requested GPIO 0 is out of range [0..32] for chip e6052000.gpio +requested GPIO 0 (45) is out of range [0..31] for chip e6052000.gpio Fixes: 2a3cf6a3599e9015 ("gpiolib: return -ENOENT if no GPIO mapping exists") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20191127095919.4214-1-geert+renesas@glider.be Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-17gpio: zynq: Fix for bug in zynq_gpio_restore_context APISwapna Manupati1-3/+5
commit 36f2e7207f21a83ca0054116191f119ac64583ab upstream. This patch writes the inverse value of Interrupt Mask Status register into the Interrupt Enable register in zynq_gpio_restore_context API to fix the bug. Fixes: e11de4de28c0 ("gpio: zynq: Add support for suspend resume") Signed-off-by: Swapna Manupati <swapna.manupati@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Srinivas Neeli <srinivas.neeli@xilinx.com> Link: https://lore.kernel.org/r/1577362338-28744-2-git-send-email-srinivas.neeli@xilinx.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-14gpiolib: acpi: Add honor_wakeup module-option + quirk mechanismHans de Goede1-1/+31
commit aa23ca3d98f756d5b1e503fb140665fb24a41a38 upstream. On some laptops enabling wakeup on the GPIO interrupts used for ACPI _AEI event handling causes spurious wakeups. This commit adds a new honor_wakeup option, defaulting to true (our current behavior), which can be used to disable wakeup on troublesome hardware to avoid these spurious wakeups. This is a workaround for an architectural problem with s2idle under Linux where we do not have any mechanism to immediately go back to sleep after wakeup events, other then for embedded-controller events using the standard ACPI EC interface, for details see: https://lore.kernel.org/linux-acpi/61450f9b-cbc6-0c09-8b3a-aff6bf9a0b3c@redhat.com/ One series of laptops which is not able to suspend without this workaround is the HP x2 10 Cherry Trail models, this commit adds a DMI based quirk which makes sets honor_wakeup to false on these models. Cc: stable@vger.kernel.org Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20200105160357.97154-3-hdegoede@redhat.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-14gpiolib: acpi: Turn dmi_system_id table into a generic quirk tableHans de Goede1-4/+15
commit 1ad1b54099c231aed8f6f257065c1b322583f264 upstream. Turn the existing run_edge_events_on_boot_blacklist dmi_system_id table into a generic quirk table, storing the quirks in the driver_data ptr. This is a preparation patch for adding other types of (DMI based) quirks. Cc: stable@vger.kernel.org Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20200105160357.97154-2-hdegoede@redhat.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-09gpiolib: fix up emulated open drain outputsRussell King1-0/+8
commit 256efaea1fdc4e38970489197409a26125ee0aaa upstream. gpiolib has a corner case with open drain outputs that are emulated. When such outputs are outputting a logic 1, emulation will set the hardware to input mode, which will cause gpiod_get_direction() to report that it is in input mode. This is different from the behaviour with a true open-drain output. Unify the semantics here. Cc: <stable@vger.kernel.org> Suggested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-04gpio: mpc8xxx: Don't overwrite default irq_set_type callbackVladimir Oltean1-1/+2
[ Upstream commit 4e50573f39229d5e9c985fa3b4923a8b29619ade ] The per-SoC devtype structures can contain their own callbacks that overwrite mpc8xxx_gpio_devtype_default. The clear intention is that mpc8xxx_irq_set_type is used in case the SoC does not specify a more specific callback. But what happens is that if the SoC doesn't specify one, its .irq_set_type is de-facto NULL, and this overwrites mpc8xxx_irq_set_type to a no-op. This means that the following SoCs are affected: - fsl,mpc8572-gpio - fsl,ls1028a-gpio - fsl,ls1088a-gpio On these boards, the irq_set_type does exactly nothing, and the GPIO controller keeps its GPICR register in the hardware-default state. On the LS1028A, that is ACTIVE_BOTH, which means 2 interrupts are raised even if the IRQ client requests LEVEL_HIGH. Another implication is that the IRQs are not checked (e.g. level-triggered interrupts are not rejected, although they are not supported). Fixes: 82e39b0d8566 ("gpio: mpc8xxx: handle differences between incarnations at a single place") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20191115125551.31061-1-olteanv@gmail.com Tested-by: Michael Walle <michael@walle.cc> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-17gpiolib: acpi: Add Terra Pad 1061 to the run_edge_events_on_boot_blacklistHans de Goede1-0/+17
[ Upstream commit 2727315df3f5ffbebcb174eed3153944a858b66f ] The Terra Pad 1061 has the usual micro-USB-B id-pin handler, but instead of controlling the actual micro-USB-B it turns the 5V boost for the tablet's USB-A connector and its keyboard-cover connector off. The actual micro-USB-B connector on the tablet is wired for charging only, and its id pin is *not* connected to the GPIO which is used for the (broken) id-pin event handler in the DSDT. While at it not only add a comment why the Terra Pad 1061 is on the blacklist, but also fix the missing comment for the Minix Neo Z83-4 entry. Fixes: 61f7f7c8f978 ("gpiolib: acpi: Add gpiolib_acpi_run_edge_events_on_boot option and blacklist") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-05gpio: raspberrypi-exp: decrease refcount on firmware dt nodeNicolas Saenz Julienne1-0/+1
[ Upstream commit 85af74c474b21940e88483fd48f6094145c89d97 ] We're getting a reference RPi's firmware node in order to be able to communicate with it's driver. We should decrease the reference count on the dt node after being done with it. Fixes: a98d90e7d588 ("gpio: raspberrypi-exp: Driver for RPi3 GPIO expander via mailbox service") Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-05gpio: pca953x: Fix AI overflow on PCAL6524Marek Vasut1-1/+1
[ Upstream commit 92f45ebe68181c2d7f76633ffae55bc9447d62cd ] The PCAL_PINCTRL_MASK is too large. The extended register block on PCAL6524, which is the largest chip with this block, has the block limited to address range 0x40..0x7f. This is because the bit 7 in the command register is used for the Address Increment functionality. Trim the mask to 0x60 to match the datasheet and to prevent accidental overwrite of the AI bit. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Reviewed-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-01gpio: max77620: Fixup debounce delaysThierry Reding1-3/+3
commit b0391479ae04dfcbd208b9571c375064caad9a57 upstream. When converting milliseconds to microseconds in commit fffa6af94894 ("gpio: max77620: Use correct unit for debounce times") some ~1 ms gaps were introduced between the various ranges supported by the controller. Fix this by changing the start of each range to the value immediately following the end of the previous range. This way a debounce time of, say 8250 us will translate into 16 ms instead of returning an -EINVAL error. Typically the debounce delay is only ever set through device tree and specified in milliseconds, so we can never really hit this issue because debounce times are always a multiple of 1000 us. The only notable exception for this is drivers/mmc/host/mmc-spi.c where the CD GPIO is requested, which passes a 1 us debounce time. According to a comment preceeding that code this should actually be 1 ms (i.e. 1000 us). Reported-by: Pavel Machek <pavel@denx.de> Signed-off-by: Thierry Reding <treding@nvidia.com> Acked-by: Pavel Machek <pavel@denx.de> Cc: <stable@vger.kernel.org> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-24gpio: syscon: Fix possible NULL ptr usageMarek Vasut1-1/+1
[ Upstream commit 70728c29465bc4bfa7a8c14304771eab77e923c7 ] The priv->data->set can be NULL while flags contains GPIO_SYSCON_FEAT_OUT and chip->set is valid pointer. This happens in case the controller uses the default GPIO setter. Always use chip->set to access the setter to avoid possible NULL pointer dereferencing. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-11-20gpiolib: Fix gpio_direction_* for single direction GPIOsRicardo Ribalda Delgado1-8/+28
[ Upstream commit ae9847f48a4b4bff0335da20be63ac84d94eb54c ] GPIOs with no programmable direction are not required to implement direction_output nor direction_input. If we try to set an output direction on an output-only GPIO or input direction on an input-only GPIO simply return 0. This allows this single direction GPIO to be used by libgpiod. Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-11-06gpio: max77620: Use correct unit for debounce timesThierry Reding1-3/+3
[ Upstream commit fffa6af94894126994a7600c6f6f09b892e89fa9 ] The gpiod_set_debounce() function takes the debounce time in microseconds. Adjust the switch/case values in the MAX77620 GPIO to use the correct unit. Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20191002122825.3948322-1-thierry.reding@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-10-17gpiolib: don't clear FLAG_IS_OUT when emulating open-drain/open-sourceBartosz Golaszewski1-8/+19
[ Upstream commit e735244e2cf068f98b6384681a38993e0517a838 ] When emulating open-drain/open-source by not actively driving the output lines - we're simply changing their mode to input. This is wrong as it will then make it impossible to change the value of such line - it's now considered to actually be in input mode. If we want to still use the direction_input() callback for simplicity then we need to set FLAG_IS_OUT manually in gpiod_direction_output() and not clear it in gpio_set_open_drain_value_commit() and gpio_set_open_source_value_commit(). Fixes: c663e5f56737 ("gpio: support native single-ended hardware drivers") Cc: stable@vger.kernel.org Reported-by: Kent Gibson <warthog618@gmail.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> [Bartosz: backported to v5.3, v4.19] Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-10-17gpio: eic: sprd: Fix the incorrect EIC offset when togglingBruce Chen1-3/+4
commit e91aafcb51f3c5001ae76c3ee027beb0b8506447 upstream. When toggling the level trigger to emulate the edge trigger, the EIC offset is incorrect without adding the corresponding bank index, thus fix it. Fixes: 7bf0d7f62282 ("gpio: eic: Add edge trigger emulation for EIC") Cc: stable@vger.kernel.org Signed-off-by: Bruce Chen <bruce.chen@unisoc.com> Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-19gpio: fix line flag validation in lineevent_createKent Gibson1-5/+3
commit 5ca2f54b597c816df54ff1b28eb99cf7262b955d upstream. lineevent_create should not allow any of GPIOHANDLE_REQUEST_OUTPUT, GPIOHANDLE_REQUEST_OPEN_DRAIN or GPIOHANDLE_REQUEST_OPEN_SOURCE to be set. Fixes: d7c51b47ac11 ("gpio: userspace ABI for reading/writing GPIO lines") Cc: stable <stable@vger.kernel.org> Signed-off-by: Kent Gibson <warthog618@gmail.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-19gpio: fix line flag validation in linehandle_createKent Gibson1-0/+8
commit e95fbc130a162ba9ad956311b95aa0da269eea48 upstream. linehandle_create should not allow both GPIOHANDLE_REQUEST_INPUT and GPIOHANDLE_REQUEST_OUTPUT to be set. Fixes: d7c51b47ac11 ("gpio: userspace ABI for reading/writing GPIO lines") Cc: stable <stable@vger.kernel.org> Signed-off-by: Kent Gibson <warthog618@gmail.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-19gpiolib: acpi: Add gpiolib_acpi_run_edge_events_on_boot option and blacklistHans de Goede1-4/+38
commit 61f7f7c8f978b1c0d80e43c83b7d110ca0496eb4 upstream. Another day; another DSDT bug we need to workaround... Since commit ca876c7483b6 ("gpiolib-acpi: make sure we trigger edge events at least once on boot") we call _AEI edge handlers at boot. In some rare cases this causes problems. One example of this is the Minix Neo Z83-4 mini PC, this device has a clear DSDT bug where it has some copy and pasted code for dealing with Micro USB-B connector host/device role switching, while the mini PC does not even have a micro-USB connector. This code, which should not be there, messes with the DDC data pin from the HDMI connector (switching it to GPIO mode) breaking HDMI support. To avoid problems like this, this commit adds a new gpiolib_acpi.run_edge_events_on_boot kernel commandline option, which allows disabling the running of _AEI edge event handlers at boot. The default value is -1/auto which uses a DMI based blacklist, the initial version of this blacklist contains the Neo Z83-4 fixing the HDMI breakage. Cc: stable@vger.kernel.org Cc: Daniel Drake <drake@endlessm.com> Cc: Ian W MORRISON <ianwmorrison@gmail.com> Reported-by: Ian W MORRISON <ianwmorrison@gmail.com> Suggested-by: Ian W MORRISON <ianwmorrison@gmail.com> Fixes: ca876c7483b6 ("gpiolib-acpi: make sure we trigger edge events at least once on boot") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20190827202835.213456-1-hdegoede@redhat.com Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Ian W MORRISON <ianwmorrison@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-29gpiolib: never report open-drain/source lines as 'input' to user-spaceBartosz Golaszewski1-2/+4
commit 2c60e6b5c9241b24b8b523fefd3e44fb85622cda upstream. If the driver doesn't support open-drain/source config options, we emulate this behavior when setting the direction by calling gpiod_direction_input() if the default value is 0 (open-source) or 1 (open-drain), thus not actively driving the line in those cases. This however clears the FLAG_IS_OUT bit for the GPIO line descriptor and makes the LINEINFO ioctl() incorrectly report this line's mode as 'input' to user-space. This commit modifies the ioctl() to always set the GPIOLINE_FLAG_IS_OUT bit in the lineinfo structure's flags field. Since it's impossible to use the input mode and open-drain/source options at the same time, we can be sure the reported information will be correct. Fixes: 521a2ad6f862 ("gpio: add userspace ABI for GPIO line information") Cc: stable <stable@vger.kernel.org> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Link: https://lore.kernel.org/r/20190806114151.17652-1-brgl@bgdev.pl Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-06gpiolib: fix incorrect IRQ requesting of an active-low lineeventMichael Wu1-2/+4
commit 223ecaf140b1dd1c1d2a1a1d96281efc5c906984 upstream. When a pin is active-low, logical trigger edge should be inverted to match the same interrupt opportunity. For example, a button pushed triggers falling edge in ACTIVE_HIGH case; in ACTIVE_LOW case, the button pushed triggers rising edge. For user space the IRQ requesting doesn't need to do any modification except to configuring GPIOHANDLE_REQUEST_ACTIVE_LOW. For example, we want to catch the event when the button is pushed. The button on the original board drives level to be low when it is pushed, and drives level to be high when it is released. In user space we can do: req.handleflags = GPIOHANDLE_REQUEST_INPUT; req.eventflags = GPIOEVENT_REQUEST_FALLING_EDGE; while (1) { read(fd, &dat, sizeof(dat)); if (dat.id == GPIOEVENT_EVENT_FALLING_EDGE) printf("button pushed\n"); } Run the same logic on another board which the polarity of the button is inverted; it drives level to be high when pushed, and level to be low when released. For this inversion we add flag GPIOHANDLE_REQUEST_ACTIVE_LOW: req.handleflags = GPIOHANDLE_REQUEST_INPUT | GPIOHANDLE_REQUEST_ACTIVE_LOW; req.eventflags = GPIOEVENT_REQUEST_FALLING_EDGE; At the result, there are no any events caught when the button is pushed. By the way, button releasing will emit a "falling" event. The timing of "falling" catching is not expected. Cc: stable@vger.kernel.org Signed-off-by: Michael Wu <michael.wu@vatics.com> Tested-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-28gpio: davinci: silence error prints in case of EPROBE_DEFERKeerthy1-2/+3
commit 541e4095f388c196685685633c950cb9b97f8039 upstream. Silence error prints in case of EPROBE_DEFER. This avoids multiple/duplicate defer prints during boot. Cc: <stable@vger.kernel.org> Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26gpiolib: Fix references to gpiod_[gs]et_*value_cansleep() variantsGeert Uytterhoeven1-3/+4
[ Upstream commit 3285170f28a850638794cdfe712eb6d93e51e706 ] Commit 372e722ea4dd4ca1 ("gpiolib: use descriptors internally") renamed the functions to use a "gpiod" prefix, and commit 79a9becda8940deb ("gpiolib: export descriptor-based GPIO interface") introduced the "raw" variants, but both changes forgot to update the comments. Readd a similar reference to gpiod_set_value(), which was accidentally removed by commit 1e77fc82110ac36f ("gpio: Add missing open drain/source handling to gpiod_set_value_cansleep()"). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20190701142738.25219-1-geert+renesas@glider.be Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26gpio: omap: ensure irq is enabled before wakeupRussell King1-7/+8
[ Upstream commit c859e0d479b3b4f6132fc12637c51e01492f31f6 ] Documentation states: NOTE: There must be a correlation between the wake-up enable and interrupt-enable registers. If a GPIO pin has a wake-up configured on it, it must also have the corresponding interrupt enabled (on one of the two interrupt lines). Ensure that this condition is always satisfied by enabling the detection events after enabling the interrupt, and disabling the detection before disabling the interrupt. This ensures interrupt/wakeup events can not happen until both the wakeup and interrupt enables correlate. If we do any clearing, clear between the interrupt enable/disable and trigger setting. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Tested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26gpio: omap: fix lack of irqstatus_raw0 for OMAP4Russell King1-0/+2
[ Upstream commit 64ea3e9094a1f13b96c33244a3fb3a0f45690bd2 ] Commit 384ebe1c2849 ("gpio/omap: Add DT support to GPIO driver") added the register definition tables to the gpio-omap driver. Subsequently to that commit, commit 4e962e8998cc ("gpio/omap: remove cpu_is_omapxxxx() checks from *_runtime_resume()") added definitions for irqstatus_raw* registers to the legacy OMAP4 definitions, but missed the DT definitions. This causes an unintentional change of behaviour for the 1.101 errata workaround on OMAP4 platforms. Fix this oversight. Fixes: 4e962e8998cc ("gpio/omap: remove cpu_is_omapxxxx() checks from *_runtime_resume()") Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Tested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-06-22gpio: fix gpio-adp5588 build errorsRandy Dunlap1-0/+1
[ Upstream commit e9646f0f5bb62b7d43f0968f39d536cfe7123b53 ] The gpio-adp5588 driver uses interfaces that are provided by GPIOLIB_IRQCHIP, so select that symbol in its Kconfig entry. Fixes these build errors: ../drivers/gpio/gpio-adp5588.c: In function ‘adp5588_irq_handler’: ../drivers/gpio/gpio-adp5588.c:266:26: error: ‘struct gpio_chip’ has no member named ‘irq’ dev->gpio_chip.irq.domain, gpio)); ^ ../drivers/gpio/gpio-adp5588.c: In function ‘adp5588_irq_setup’: ../drivers/gpio/gpio-adp5588.c:298:2: error: implicit declaration of function ‘gpiochip_irqchip_add_nested’ [-Werror=implicit-function-declaration] ret = gpiochip_irqchip_add_nested(&dev->gpio_chip, ^ ../drivers/gpio/gpio-adp5588.c:307:2: error: implicit declaration of function ‘gpiochip_set_nested_irqchip’ [-Werror=implicit-function-declaration] gpiochip_set_nested_irqchip(&dev->gpio_chip, ^ Fixes: 459773ae8dbb ("gpio: adp5588-gpio: support interrupt controller") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: linux-gpio@vger.kernel.org Reviewed-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Acked-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-06-15gpio: vf610: Do not share irq_chipAndrey Smirnov1-14/+12
[ Upstream commit 338aa10750ba24d04beeaf5dc5efc032e5cf343f ] Fix the warning produced by gpiochip_set_irq_hooks() by allocating a dedicated IRQ chip per GPIO chip/port. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com> Cc: Chris Healy <cphealy@gmail.com> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Heiner Kallweit <hkallweit1@gmail.com> Cc: Fabio Estevam <festevam@gmail.com> Cc: linux-gpio@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-imx@nxp.com Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-06-15gpio: gpio-omap: add check for off wake capable gpiosTony Lindgren1-8/+17
[ Upstream commit da38ef3ed10a09248e13ae16530c2c6d448dc47d ] We are currently assuming all GPIOs are non-wakeup capable GPIOs as we not configuring the bank->non_wakeup_gpios like we used to earlier with platform_data. Let's add omap_gpio_is_off_wakeup_capable() to make the handling clearer while considering that later patches may want to configure SoC specific bank->non_wakeup_gpios for the GPIOs in wakeup domain. Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Keerthy <j-keerthy@ti.com> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Tero Kristo <t-kristo@ti.com> Reported-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-08gpio: mxc: add check to return defer probe if clock tree NOT readyAnson Huang1-1/+4
commit a329bbe707cee2cf8c660890ef2ad0d00ec7e8a3 upstream. On i.MX8MQ platform, clock driver uses platform driver model and it is probed after GPIO driver, so when GPIO driver fails to get clock, it should check the error type to decide whether to return defer probe or just ignore the clock operation. Fixes: 2808801aab8a ("gpio: mxc: add clock operation") Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-04gpio: of: Fix of_gpiochip_add() error pathGeert Uytterhoeven1-1/+7
[ Upstream commit f7299d441a4da8a5088e651ea55023525a793a13 ] If the call to of_gpiochip_scan_gpios() in of_gpiochip_add() fails, no error handling is performed. This lead to the need of callers to call of_gpiochip_remove() on failure, which causes "BAD of_node_put() on ..." if the failure happened before the call to of_node_get(). Fix this by adding proper error handling. Note that calling gpiochip_remove_pin_ranges() multiple times causes no harm: subsequent calls are a no-op. Fixes: dfbd379ba9b7431e ("gpio: of: Return error if gpio hog configuration failed") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Mukesh Ojha <mojha@codeaurora.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin (Microsoft) <sashal@kernel.org>
2019-05-04gpio: aspeed: fix a potential NULL pointer dereferenceKangjie Lu1-0/+2
[ Upstream commit 6cf4511e9729c00a7306cf94085f9cc3c52ee723 ] In case devm_kzalloc, the patch returns ENOMEM to avoid potential NULL pointer dereference. Signed-off-by: Kangjie Lu <kjlu@umn.edu> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Sasha Levin (Microsoft) <sashal@kernel.org>
2019-05-02gpio: eic: sprd: Fix incorrect irq type setting for the sync EICBaolin Wang1-0/+1
commit 102bbe34b31c9159e714432afd64458f6f3876d7 upstream. When setting sync EIC as IRQ_TYPE_EDGE_BOTH type, we missed to set the SPRD_EIC_SYNC_INTMODE register to 0, which means detecting edge signals. Thus this patch fixes the issue. Fixes: 25518e024e3a ("gpio: Add Spreadtrum EIC driver support") Cc: <stable@vger.kernel.org> Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-20gpio: pxa: handle corner case of unprobed deviceRobert Jarzmik1-0/+6
[ Upstream commit 9ce3ebe973bf4073426f35f282c6b955ed802765 ] In the corner case where the gpio driver probe fails, for whatever reason, the suspend and resume handlers will still be called as they have to be registered as syscore operations. This applies as well when no probe was called while the driver has been built in the kernel. Nicolas tracked this in : https://bugzilla.kernel.org/show_bug.cgi?id=200905 Therefore, add a failsafe in these function, and test if a proper probe succeeded and the driver is functional. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Reported-by: Nicolas Chauvet <kwizart@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-04-05gpio: gpio-omap: fix level interrupt idlingRussell King1-6/+8
[ Upstream commit d01849f7deba81f4959fd9e51bf20dbf46987d1c ] Tony notes that the GPIO module does not idle when level interrupts are in use, as the wakeup appears to get stuck. After extensive investigation, it appears that the wakeup will only be cleared if the interrupt status register is cleared while the interrupt is enabled. However, we are currently clearing it with the interrupt disabled for level-based interrupts. It is acknowledged that this observed behaviour conflicts with a statement in the TRM: CAUTION After servicing the interrupt, the status bit in the interrupt status register (GPIOi.GPIO_IRQSTATUS_0 or GPIOi.GPIO_IRQSTATUS_1) must be reset and the interrupt line released (by setting the corresponding bit of the interrupt status register to 1) before enabling an interrupt for the GPIO channel in the interrupt-enable register (GPIOi.GPIO_IRQSTATUS_SET_0 or GPIOi.GPIO_IRQSTATUS_SET_1) to prevent the occurrence of unexpected interrupts when enabling an interrupt for the GPIO channel. However, this does not appear to be a practical problem. Further, as reported by Grygorii Strashko <grygorii.strashko@ti.com>, the TI Android kernel tree has an earlier similar patch as "GPIO: OMAP: Fix the sequence to clear the IRQ status" saying: if the status is cleared after disabling the IRQ then sWAKEUP will not be cleared and gates the module transition When we unmask the level interrupt after the interrupt has been handled, enable the interrupt and only then clear the interrupt. If the interrupt is still pending, the hardware will re-assert the interrupt status. Should the caution note in the TRM prove to be a problem, we could use a clear-enable-clear sequence instead. Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Keerthy <j-keerthy@ti.com> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> [tony@atomide.com: updated comments based on an earlier TI patch] Signed-off-by: Tony Lindgren <tony@atomide.com> Acked-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-04-03gpio: adnp: Fix testing wrong value in adnp_gpio_direction_inputAxel Lin1-2/+4
commit c5bc6e526d3f217ed2cc3681d256dc4a2af4cc2b upstream. Current code test wrong value so it does not verify if the written data is correctly read back. Fix it. Also make it return -EPERM if read value does not match written bit, just like it done for adnp_gpio_direction_output(). Fixes: 5e969a401a01 ("gpio: Add Avionic Design N-bit GPIO expander support") Cc: <stable@vger.kernel.org> Signed-off-by: Axel Lin <axel.lin@ingics.com> Reviewed-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-03gpio: exar: add a check for the return value of ida_simple_get failsKangjie Lu1-0/+2
commit 7ecced0934e574b528a1ba6c237731e682216a74 upstream. ida_simple_get may fail and return a negative error number. The fix checks its return value; if it fails, go to err_destroy. Cc: <stable@vger.kernel.org> Signed-off-by: Kangjie Lu <kjlu@umn.edu> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-23gpio: pca953x: Fix dereference of irq data in shutdownMark Walton1-1/+2
commit c378b3aa015931a46c91d6ccc2fe04d97801d060 upstream. If a PCA953x gpio was used as an interrupt and then released, the shutdown function was trying to extract the pca953x_chip pointer directly from the irq_data, but in reality was getting the gpio_chip structure. The net effect was that the subsequent writes to the data structure corrupted data in the gpio_chip structure, which wasn't immediately obvious until attempting to use the GPIO again in the future, at which point the kernel panics. This fix correctly extracts the pca953x_chip structure via the gpio_chip structure, as is correctly done in the other irq functions. Fixes: 0a70fe00efea ("gpio: pca953x: Clear irq trigger type on irq shutdown") Cc: stable@vger.kernel.org Signed-off-by: Mark Walton <mark.walton@serialtek.com> Reviewed-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-14gpio: vf610: Mask all GPIO interruptsAndrew Lunn1-0/+5
[ Upstream commit 7ae710f9f8b2cf95297e7bbfe1c09789a7dc43d4 ] On SoC reset all GPIO interrupts are disable. However, if kexec is used to boot into a new kernel, the SoC does not experience a reset. Hence GPIO interrupts can be left enabled from the previous kernel. It is then possible for the interrupt to fire before an interrupt handler is registered, resulting in the kernel complaining of an "unexpected IRQ trap", the interrupt is never cleared, and so fires again, resulting in an interrupt storm. Disable all GPIO interrupts before registering the GPIO IRQ chip. Fixes: 7f2691a19627 ("gpio: vf610: add gpiolib/IRQ chip driver for Vybrid") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-02-27gpio: pxa: avoid attempting to set pin direction via pinctrl on MMP2Lubomir Rintel1-0/+1
commit af14b2c98adb85e9517390bb88309338b9075350 upstream. Similarly to PXA3xx, pinctrl-single can't set pin direction on MMP2 either. See also: commit 9dabfdd84bdfa ("gpio: pxa: disable pinctrl calls for PXA3xx") Cc: stable@vger.kernel.org Fixes: a770d946371e ("gpio: pxa: add pin control gpio direction and request") Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-27gpio: MT7621: use a per instance irq_chip structureRené van Dorst1-10/+10
commit fa84667b98fd1a191b2465d66b440bda6714b3bf upstream. This fixes the kernel complains: gpio gpiochip1: (1e000600.gpio-bank1): detected irqchip that is shared with multiple gpiochips: please fix the driver. gpio gpiochip2: (1e000600.gpio-bank2): detected irqchip that is shared with multiple gpiochips: please fix the driver. Fixes: 4ba9c3afda41 ("gpio: mt7621: Add a driver for MT7621") Cc: stable@vger.kernel.org Signed-off-by: René van Dorst <opensource@vdorst.com> Cc: linux-gpio@vger.kernel.org Cc: linux-mediatek@lists.infradead.org Tested-by: Greg Ungerer <gerg@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-20gpio: mxc: move gpio noirq suspend/resume to syscore phaseAnson Huang1-17/+24
commit 1a5287a3dbc34cd0c02c8f64c9131bd23cdfe2bb upstream. During noirq suspend/resume phase, GPIO irq could arrive and its registers like IMR will be changed by irq handle process, to make the GPIO registers exactly when it is powered ON after resume, move the GPIO noirq suspend/resume callback to syscore suspend/resume phase, local irq is disabled at this phase so GPIO registers are atomic. Fixes: c19fdaeea0aa ("gpio: mxc: add power management support") Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Martin Hundebøll <martin@geanix.com> Cc: <stable@vger.kernel.org> # 4.19.x+ Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-02-12gpio: mt7621: pass mediatek_gpio_bank_probe() failure up the stackNicholas Mc Guire1-2/+6
[ Upstream commit a109c2dbb571b10bb9969285b646f57309c98251 ] The error cases of mediatek_gpio_bank_probe() would go unnoticed (except for the dev_err() messages). The probe function should return an error if one of the banks failed to initialize properly indicated by not returning non-0. Fixes: 4ba9c3afda41 ("gpio: mt7621: Add a driver for MT7621") Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> Acked-by: Sean Wang <sean.wang@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-02-12gpio: mt7621: report failure of devm_kasprintf()Nicholas Mc Guire1-0/+2
[ Upstream commit 59d646c775d6ae688ee90fda9f2a4270c47b7490 ] kasprintf() may return NULL on failure of internal allocation thus the assigned label is not safe if not explicitly checked. On error mediatek_gpio_bank_probe() returns negative values so -ENOMEM in the (unlikely) failure case should be fine here. Fixes: 4ba9c3afda41 ("gpio: mt7621: Add a driver for MT7621") Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> Reviewed-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Acked-by: Sean Wang <sean.wang@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-02-12gpiolib: Fix possible use after free on labelMuchun Song1-4/+21
[ Upstream commit 18534df419041e6c1f4b41af56ee7d41f757815c ] gpiod_request_commit() copies the pointer to the label passed as an argument only to be used later. But there's a chance the caller could immediately free the passed string(e.g., local variable). This could trigger a use after free when we use gpio label(e.g., gpiochip_unlock_as_irq(), gpiochip_is_requested()). To be on the safe side: duplicate the string with kstrdup_const() so that if an unaware user passes an address to a stack-allocated buffer, we won't get the arbitrary label. Also fix gpiod_set_consumer_name(). Signed-off-by: Muchun Song <smuchun@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-02-06gpio: sprd: Fix incorrect irq type setting for the async EICNeo Hou1-0/+1
commit f785ffb61605734b518afa766d1b5445e9f38c8d upstream. When setting async EIC as IRQ_TYPE_EDGE_BOTH type, we missed to set the SPRD_EIC_ASYNC_INTMODE register to 0, which means detecting edge signals. Thus this patch fixes the issue. Fixes: 25518e024e3a ("gpio: Add Spreadtrum EIC driver support") Cc: <stable@vger.kernel.org> Signed-off-by: Neo Hou <neo.hou@unisoc.com> Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-06gpio: sprd: Fix the incorrect data registerNeo Hou1-1/+12
commit 09d158d52d2bceda736797a61b6c13d7fc83707b upstream. Since differnt type EICs have its own data register to read, thus fix the incorrect data register. Fixes: 25518e024e3a ("gpio: Add Spreadtrum EIC driver support") Cc: <stable@vger.kernel.org> Signed-off-by: Neo Hou <neo.hou@unisoc.com> Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-06gpio: pcf857x: Fix interrupts on multiple instancesRoger Quadros1-14/+12
commit 2486e67374aa8b7854c2de32869642c2873b3d53 upstream. When multiple instances of pcf857x chips are present, a fix up message [1] is printed during the probe of the 2nd and later instances. The issue is that the driver is using the same irq_chip data structure between multiple instances. Fix this by allocating the irq_chip data structure per instance. [1] fix up message addressed by this patch [ 1.212100] gpio gpiochip9: (pcf8575): detected irqchip that is shared with multiple gpiochips: please fix the driver. Cc: Stable <stable@vger.kernel.org> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-06gpiolib: fix line event timestamps for nested irqsBartosz Golaszewski1-1/+9
commit 1033be58992f818dc564196ded2bcc3f360bc297 upstream. Nested interrupts run inside the calling thread's context and the top half handler is never called which means that we never read the timestamp. This issue came up when trying to read line events from a gpiochip using regmap_irq_chip for interrupts. Fix it by reading the timestamp from the irq thread function if it's still 0 by the time the second handler is called. Fixes: d58f2bf261fd ("gpio: Timestamp events in hardirq handler") Cc: stable@vger.kernel.org Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-06gpio: altera-a10sr: Set proper output level for direction_outputAxel Lin1-1/+3
commit 2095a45e345e669ea77a9b34bdd7de5ceb422f93 upstream. The altr_a10sr_gpio_direction_output should set proper output level based on the value argument. Fixes: 26a48c4cc2f1 ("gpio: altera-a10sr: Add A10 System Resource Chip GPIO support.") Cc: <stable@vger.kernel.org> Signed-off-by: Axel Lin <axel.lin@ingics.com> Tested by: Thor Thayer <thor.thayer@linux.intel.com> Reviewed by: Thor Thayer <thor.thayer@linux.intel.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-27 13:50:30 +0300