| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
[ Upstream commit 6f8ecb7f85f441eb7d78ba2a4df45ee8a821934e ]
Current GPIO label is fixed, so can't distinguish different GPIO
controllers through labels. Use dev name instead.
Fixes: 7f2691a19627 ("gpio: vf610: add gpiolib/IRQ chip driver for Vybrid")
Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 45fecdb9f658d9c82960c98240bc0770ade19aca ]
for_each_pci_dev() is implemented by pci_get_device(). The comment of
pci_get_device() says that it will increase the reference count for the
returned pci_dev and also decrease the reference count for the input
pci_dev @from if it is not NULL.
If we break for_each_pci_dev() loop with pdev not NULL, we need to call
pci_dev_put() to decrease the reference count. Add the missing
pci_dev_put() after the 'out' label. Since pci_dev_put() can handle NULL
input parameter, there is no problem for the 'Device not found' branch.
For the normal path, add pci_dev_put() in amd_gpio_exit().
Fixes: f942a7de047d ("gpio: add a driver for GPIO pins found on AMD-8111 south bridge chips")
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 279c12df8d2efb28def9d037f288cbfb97c30fe2 ]
Commit e39d5ef67804 ("powerpc/5xxx: extend mpc8xxx_gpio driver to support
mpc512x gpios") implemented support for IRQ_TYPE_LEVEL_LOW flow type in
mpc512x via falling edge type. Do same for mpc85xx which support was added
in commit 345e5c8a1cc3 ("powerpc: Add interrupt support to mpc8xxx_gpio").
Fixes probing of lm90 hwmon driver on mpc85xx based board which use level
interrupt. Without it kernel prints error and refuse lm90 to work:
[ 15.258370] genirq: Setting trigger mode 8 for irq 49 failed (mpc8xxx_irq_set_type+0x0/0xf8)
[ 15.267168] lm90 0-004c: cannot request IRQ 49
[ 15.272708] lm90: probe of 0-004c failed with error -22
Fixes: 345e5c8a1cc3 ("powerpc: Add interrupt support to mpc8xxx_gpio")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5d07a692f9562f9c06e62cce369e9dd108173a0f ]
We should use of_node_get() when a new reference of device_node
is created. It is noted that the old reference stored in
'mm_gc->gc.of_node' should also be decreased.
This patch is based on the fact that there is a call site in function
'qe_add_gpiochips()' of src file 'drivers\soc\fsl\qe\gpio.c'. In this
function, of_mm_gpiochip_add_data() is contained in an iteration of
for_each_compatible_node() which will automatically increase and
decrease the refcount. So we need additional of_node_get() for the
reference escape in of_mm_gpiochip_add_data().
Fixes: a19e3da5bc5f ("of/gpio: Kill of_gpio_chip and add members directly to gpio_chip")
Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c81aba8fde2aee4f5778ebab3a1d51bd2ef48e4c ]
commit 979934da9e7a ("[PATCH] mips: update IRQ handling for vr41xx") added
a function irq_dispatch, and it'll increase irq_err_count when the get_irq
callback returns a negative value, but increase irq_err_count in get_irq
was not removed.
And also, modpost complains once gpio-vr41xx drivers become modules.
ERROR: modpost: "irq_err_count" [drivers/gpio/gpio-vr41xx.ko] undefined!
So it would be a good idea to remove repetitive increase irq_err_count in
get_irq callback.
Fixes: 27fdd325dace ("MIPS: Update VR41xx GPIO driver to use gpiolib")
Fixes: 979934da9e7a ("[PATCH] mips: update IRQ handling for vr41xx")
Reported-by: k2ci <kernel-bot@kylinos.cn>
Signed-off-by: huhai <huhai@kylinos.cn>
Signed-off-by: Genjian Zhang <zhanggenjian@kylinos.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3ecb10175b1f776f076553c24e2689e42953fef5 ]
The driver doesn't take struct pwm_state::polarity into account when
configuring the hardware, so refuse requests for inverted polarity.
Fixes: 757642f9a584 ("gpio: mvebu: Add limited PWM support")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9bf3ac466faa83d51a8fe9212131701e58fdef74 ]
For gpio controller contain register PDDR, when set one target bit,
current logic will clear all other bits, this is wrong. Use operator
'|=' to fix it.
Fixes: 659d8a62311f ("gpio: vf610: add imx7ulp support")
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 213d266ebfb1621aab79cfe63388facc520a1381 ]
When compiling with -Wformat, clang emits the following warning:
gpiolib-acpi.c:393:4: warning: format specifies type 'unsigned char' but the argument has type 'int' [-Wformat]
pin);
^~~
So warning that '%hhX' is paired with an 'int' is all just completely
mindless and wrong. Sadly, I can see a different bogus warning reason
why people would want to use '%02hhX'.
Again, the *sane* thing from a human perspective is to use '%02X. But
if the compiler doesn't do any range analysis at all, it could decide
that "Oh, that print format could need up to 8 bytes of space in the
result". Using '%02hhX' would cut that down to two.
And since we use
char ev_name[5];
and currently use "_%c%02hhX" as the format string, even a compiler
that doesn't notice that "pin <= 255" test that guards this all will
go "OK, that's at most 4 bytes and the final NUL termination, so it's
fine".
While a compiler - like gcc - that only sees that the original source
of the 'pin' value is a 'unsigned short' array, and then doesn't take
the "pin <= 255" into account, will warn like this:
gpiolib-acpi.c: In function 'acpi_gpiochip_request_interrupt':
gpiolib-acpi.c:206:24: warning: '%02X' directive writing between 2 and 4 bytes into a region of size 3 [-Wformat-overflow=]
sprintf(ev_name, "_%c%02X",
^~~~
gpiolib-acpi.c:206:20: note: directive argument in the range [0, 65535]
because gcc isn't being very good at that argument range analysis either.
In other words, the original use of 'hhx' was bogus to begin with, and
due to *another* compiler warning being bad, and we had that bad code
being written back in 2016 to work around _that_ compiler warning
(commit e40a3ae1f794: "gpio: acpi: work around false-positive
-Wstring-overflow warning").
Sadly, two different bad compiler warnings together does not make for
one good one.
It just makes for even more pain.
End result: I think the simplest and cleanest option is simply the
proposed change which undoes that '%hhX' change for gcc, and replaces
it with just using a slightly bigger stack allocation. It's not like
a 5-byte allocation is in any way likely to have saved any actual stack,
since all the other variables in that function are 'int' or bigger.
False-positive compiler warnings really do make people write worse
code, and that's a problem. But on a scale of bad code, I feel that
extending the buffer trivially is better than adding a pointless cast
that literally makes no sense.
At least in this case the end result isn't unreadable or buggy. We've
had several cases of bad compiler warnings that caused changes that
were actually horrendously wrong.
Fixes: e40a3ae1f794 ("gpio: acpi: work around false-positive -Wstring-overflow warning")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 03fe003547975680fdb9ff5ab0e41cb68276c4f2 ]
This works around an issue with the hardware where both OE and
DAT are exposed in the same register. If both are updated
simultaneously, the harware makes no guarantees that OE or DAT
will actually change in any given order and may result in a
glitch of a few ns on a GPIO pin when changing direction and value
in a single write.
Setting direction to input now only affects OE bit. Setting
direction to output updates DAT first, then OE.
Fixes: 9c6686322d74 ("gpio: add Technologic I2C-FPGA gpio support")
Signed-off-by: Mark Featherston <mark@embeddedTS.com>
Signed-off-by: Kris Bahnsen <kris@embeddedTS.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit bdfd6ab8fdccd8b138837efff66f4a1911496378 ]
If the IRQ is already in use, then acpi_dev_gpio_irq_get_by() really
should not change the type underneath the current owner.
I specifically hit an issue with this an a Chuwi Hi8 Super (CWI509) Bay
Trail tablet, when the Boot OS selection in the BIOS is set to Android.
In this case _STA for a MAX17047 ACPI I2C device wrongly returns 0xf and
the _CRS resources for this device include a GpioInt pointing to a GPIO
already in use by an _AEI handler, with a different type then specified
in the _CRS for the MAX17047 device. Leading to the acpi_dev_gpio_irq_get()
call done by the i2c-core-acpi.c code changing the type breaking the
_AEI handler.
Now this clearly is a bug in the DSDT of this tablet (in Android mode),
but in general calling irq_set_irq_type() on an IRQ which already is
in use seems like a bad idea.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a51b2fb94b04ab71e53a71b9fad03fa826941254 ]
Return value of "pm_runtime_get_sync" API was neither captured nor checked.
Fixed it by capturing the return value and then checking for any warning.
Addresses-Coverity: "check_return"
Signed-off-by: Srinivas Neeli <srinivas.neeli@xilinx.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit da91ece226729c76f60708efc275ebd4716ad089 ]
Like some other Bay and Cherry Trail SoC based devices the Dell Venue
10 Pro 5055 has an embedded-controller which uses ACPI GPIO events to
report events instead of using the standard ACPI EC interface for this.
The EC interrupt is only used to report battery-level changes and
it keeps doing this while the system is suspended, causing the system
to not stay suspended.
Add an ignore-wake quirk for the GPIO pin used by the EC to fix the
spurious wakeups from suspend.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6e5d5791730b55a1f987e1db84b078b91eb49e99 ]
fixed the following coccicheck:
./drivers/gpio/gpiolib-acpi.c:176:7-27: ERROR: Threaded IRQ with no
primary handler requested without IRQF_ONESHOT
Make sure threaded IRQs without a primary handler are always request
with IRQF_ONESHOT
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit a8002a35935aaefcd6a42ad3289f62bab947f2ca upstream.
If no n_latch value will be provided at driver probe then all pins will
be used as an input:
gpio->out = ~n_latch;
In that case initial state for all pins is "one":
gpio->status = gpio->out;
So if pcf857x IRQ happens with change pin value from "zero" to "one"
then we miss it, because of "one" from IRQ and "one" from initial state
leaves corresponding pin unchanged:
change = (gpio->status ^ status) & gpio->irq_enabled;
The right solution will be to read actual state at driver probe.
Cc: stable@vger.kernel.org
Fixes: 6e20a0a429bd ("gpio: pcf857x: enable gpio_to_irq() support")
Signed-off-by: Maxim Kiselev <bigunclemax@gmail.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e73b0101ae5124bf7cd3fb5d250302ad2f16a416 upstream.
The period is the sum of on and off values. That is, calculate period as
($on + $off) / clkrate
instead of
$off / clkrate - $on / clkrate
that makes no sense.
Reported-by: Russell King <linux@armlinux.org.uk>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Fixes: 757642f9a584e ("gpio: mvebu: Add limited PWM support")
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
[baruch: backport to kernels <= v5.10]
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 7ee1a01e47403f72b9f38839a737692f6991263e ]
When mvebu_pwm_probe() fails IRQ domain is not released. Move pwm probe
before IRQ domain allocation. Add pwm cleanup code to the failure path.
Fixes: 757642f9a584 ("gpio: mvebu: Add limited PWM support")
Reported-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 1b02d9e770cd7087f34c743f85ccf5ea8372b047 upstream
If the module init function fails after creating the debugs directory,
it's never removed. Add proper cleanup calls to avoid this resource
leak.
Fixes: 9202ba2397d1 ("gpio: mockup: implement event injecting over debugfs")
Cc: <stable@vger.kernel.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
[sudip: adjust context]
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 214b0e1ad01abf4c1f6d8d28fa096bf167e47cef upstream.
The offset of regmap is incorrect, j * 8 is move to the
wrong register.
for example:
asume i = 0, j = 1. we want to set KPY5 as interrupt
falling edge mode, regmap[0][1] should be TC3589x_GPIOIBE1 0xcd
but, regmap[i] + j * 8 = TC3589x_GPIOIBE0 + 8 ,point to 0xd4,
this is TC3589x_GPIOIE2 not TC3589x_GPIOIBE1.
Fixes: d88b25be3584 ("gpio: Add TC35892 GPIO driver")
Cc: Cc: stable@vger.kernel.org
Signed-off-by: dillon min <dillon.minfei@gmail.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 861254d826499944cb4d9b5a15f5a794a6b99a69 ]
Calling pm_runtime_get_sync increments the counter even in case of
failure, causing incorrect ref count if pm_runtime_put is not called in
error handling paths. Call pm_runtime_put if pm_runtime_get_sync fails.
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20200605030052.78235-1-navid.emamdoost@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e6f390a834b56583e6fc0949822644ce92fbb107 ]
Calling pm_runtime_get_sync increments the counter even in case of
failure, causing incorrect ref count. Call pm_runtime_put if
pm_runtime_get_sync fails.
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20200605025207.65719-1-navid.emamdoost@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 333830aa149a87cabeb5d30fbcf12eecc8040d2c ]
The commit 7ecced0934e5 ("gpio: exar: add a check for the return value
of ida_simple_get fails") added a goto jump to the common error
handler for ida_simple_get() error, but this is wrong in two ways:
it doesn't set the proper return code and, more badly, it invokes
ida_simple_remove() with a negative index that shall lead to a kernel
panic via BUG_ON().
This patch addresses those two issues.
Fixes: 7ecced0934e5 ("gpio: exar: add a check for the return value of ida_simple_get fails")
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0cf253eed5d2bdf7bb3152457b38f39b012955f7 ]
The driver currently leaves GPIO IRQs unmasked even when the GPIO IRQ
client has released the GPIO IRQ. This allows the HW to raise IRQs, and
SW to process them, after shutdown. Fix this by masking the IRQ when it's
shut down. This is usually taken care of by the irqchip core, but since
this driver has a custom irq_shutdown implementation, it must do this
explicitly itself.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Link: https://lore.kernel.org/r/20200427232605.11608-1-swarren@wwwdotorg.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1ca2a92b2a99323f666f1b669b7484df4bda05e4 ]
This reverts commit 72d3200061776264941be1b5a9bb8e926b3b30a5.
We cannot blindly query the direction of all GPIOs when the pins are
first registered. The get_direction callback normally triggers a
read/write to hardware, but we shouldn't be touching the hardware for
an individual GPIO until after it's been properly claimed.
Signed-off-by: Timur Tabi <timur@codeaurora.org>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0c625ccfe6f754d0896b8881f5c85bcb81699f1f upstream.
There are at least 3 models of the HP x2 10 models:
Bay Trail SoC + AXP288 PMIC
Cherry Trail SoC + AXP288 PMIC
Cherry Trail SoC + TI PMIC
Like on the other HP x2 10 models we need to ignore wakeup for ACPI GPIO
events on the external embedded-controller pin to avoid spurious wakeups
on the HP x2 10 CHT + AXP288 model too.
This commit adds an extra DMI based quirk for the HP x2 10 CHT + AXP288
model, ignoring wakeups for ACPI GPIO events on the EC interrupt pin
on this model. This fixes spurious wakeups from suspend on this model.
Fixes: aa23ca3d98f7 ("gpiolib: acpi: Add honor_wakeup module-option + quirk mechanism")
Reported-and-tested-by: Marc Lehmann <schmorp@schmorp.de>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20200302111225.6641-4-hdegoede@redhat.com
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0e91506ba00730f088961a8d39f8693b0f8e3fea upstream.
Commit aa23ca3d98f7 ("gpiolib: acpi: Add honor_wakeup module-option +
quirk mechanism") was added to deal with spurious wakeups on one specific
model of the HP x2 10 series. In the mean time I have learned that there
are at least 3 different HP x2 10 models:
Bay Trail SoC + AXP288 PMIC
Cherry Trail SoC + AXP288 PMIC
Cherry Trail SoC + TI PMIC
And the original quirk is only correct for (and only matches the)
Cherry Trail SoC + TI PMIC model.
The Bay Trail SoC + AXP288 PMIC model has different DMI strings, has
the external EC interrupt on a different GPIO pin and only needs to ignore
wakeups on the EC interrupt, the INT0002 device works fine on this model.
This commit adds an extra DMI based quirk for the HP x2 10 BYT + AXP288
model, ignoring wakeups for ACPI GPIO events on the EC interrupt pin
on this model. This fixes spurious wakeups from suspend on this model.
Fixes: aa23ca3d98f7 ("gpiolib: acpi: Add honor_wakeup module-option + quirk mechanism")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20200302111225.6641-3-hdegoede@redhat.com
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2ccb21f5516afef5e251184eeefbf36db90206d7 upstream.
Commit aa23ca3d98f7 ("gpiolib: acpi: Add honor_wakeup module-option +
quirk mechanism") was added to deal with spurious wakeups on one specific
model of the HP x2 10 series.
The approach taken there was to add a bool controlling wakeup support for
all ACPI GPIO events. This was sufficient for the specific HP x2 10 model
the commit was trying to fix, but in the mean time other models have
turned up which need a similar workaround to avoid spurious wakeups from
suspend, but only for one of the pins on which the ACPI tables request
ACPI GPIO events.
Since the honor_wakeup option was added to be able to ignore wake events,
the name was perhaps not the best, this commit renames it to ignore_wake
and changes it to a string with the following format:
gpiolib_acpi.ignore_wake=controller@pin[,controller@pin[,...]]
This allows working around spurious wakeup issues on a per pin basis.
This commit also reworks the existing quirk for the HP x2 10 so that
it functions as before.
Note:
-This removes the honor_wakeup parameter. This has only been upstream for
a short time and to the best of my knowledge there are no users using
this module parameter.
-The controller@pin[,controller@pin[,...]] syntax is based on an existing
kernel module parameter using the same controller@pin format. That version
uses ';' as separator, but in practice that is problematic because grub2
cannot handle this without taking special care to escape the ';', so here
we are using a ',' as separator instead which does not have this issue.
Fixes: aa23ca3d98f7 ("gpiolib: acpi: Add honor_wakeup module-option + quirk mechanism")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20200302111225.6641-2-hdegoede@redhat.com
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit efaa87fa0947d525cf7c075316adde4e3ac7720b upstream.
Commit aa23ca3d98f7 ("gpiolib: acpi: Add honor_wakeup module-option +
quirk mechanism") added a quirk for some models of the HP x2 10 series.
There are 2 issues with the comment describing the quirk:
1) The comment claims the DMI quirk applies to all Cherry Trail based HP x2
10 models. In the mean time I have learned that there are at least 3
models of the HP x2 10 models:
Bay Trail SoC + AXP288 PMIC
Cherry Trail SoC + AXP288 PMIC
Cherry Trail SoC + TI PMIC
And this quirk's DMI matches only match the Cherry Trail SoC + TI PMIC
SoC, which is good because we want a slightly different quirk for the
others. This commit updates the comment to make it clear that the quirk
is only for the Cherry Trail SoC + TI PMIC models.
2) The comment says that it is ok to disable wakeup on all ACPI GPIO event
handlers, because there is only the one for the embedded-controller
events. This is not true, there also is a handler for the special
INT0002 device which is related to USB wakeups. We need to also disable
wakeups on that one because the device turns of the USB-keyboard built
into the dock when closing the lid. The XHCI controller takes a while
to notice this, so it only notices it when already suspended, causing
a spurious wakeup because of this. So disabling wakeup on all handlers
is the right thing to do, but not because there only is the one handler
for the EC events. This commit updates the comment to correctly reflect
this.
Fixes: aa23ca3d98f7 ("gpiolib: acpi: Add honor_wakeup module-option + quirk mechanism")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20200302111225.6641-1-hdegoede@redhat.com
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
grgpio_irq_map/unmap()
[ Upstream commit e36eaf94be8f7bc4e686246eed3cf92d845e2ef8 ]
The driver may sleep while holding a spinlock.
The function call path (from bottom to top) in Linux 4.19 is:
drivers/gpio/gpio-grgpio.c, 261:
request_irq in grgpio_irq_map
drivers/gpio/gpio-grgpio.c, 255:
_raw_spin_lock_irqsave in grgpio_irq_map
drivers/gpio/gpio-grgpio.c, 318:
free_irq in grgpio_irq_unmap
drivers/gpio/gpio-grgpio.c, 299:
_raw_spin_lock_irqsave in grgpio_irq_unmap
request_irq() and free_irq() can sleep at runtime.
To fix these bugs, request_irq() and free_irq() are called without
holding the spinlock.
These bugs are found by a static analysis tool STCheck written by myself.
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Link: https://lore.kernel.org/r/20191218132605.10594-1-baijiaju1990@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c5706c7defc79de68a115b5536376298a8fef111 ]
Driver fails to compile in a minimized kernel's configuration because of
the missing dependency on GPIOLIB_IRQCHIP.
error: ‘struct gpio_chip’ has no member named ‘irq’
44 | virq = irq_find_mapping(gpio->gpio_chip.irq.domain, offset);
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20200106015154.12040-1-digetx@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 322f6a3182d42df18059a89c53b09d33919f755e ]
Dear Linus Walleij,
In old kernels, some APIs still try to use parent->of_node from struct gpio_chip,
and it could be resulted in kernel panic because parent is NULL. Adding platform
device to gpiochip->parent can fix this problem.
Signed-off-by: Johnson Chen <johnsonch.chen@moxa.com>
Link: https://patchwork.kernel.org/patch/11234609
Link: https://lore.kernel.org/r/HK0PR01MB3521489269F76467DFD7843FFA450@HK0PR01MB3521.apcprd01.prod.exchangelabs.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit d935bd50dd14a7714cbdba9a76435dbb56edb1ae upstream.
When a GPIO offset in a lookup table is out-of-range, the printed error
message (1) does not include the actual out-of-range value, and (2)
contains an off-by-one error in the upper bound.
Avoid user confusion by also printing the actual GPIO offset, and
correcting the upper bound of the range.
While at it, use "%u" for unsigned int.
Sample impact:
-requested GPIO 0 is out of range [0..32] for chip e6052000.gpio
+requested GPIO 0 (45) is out of range [0..31] for chip e6052000.gpio
Fixes: 2a3cf6a3599e9015 ("gpiolib: return -ENOENT if no GPIO mapping exists")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20191127095919.4214-1-geert+renesas@glider.be
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 36f2e7207f21a83ca0054116191f119ac64583ab upstream.
This patch writes the inverse value of Interrupt Mask Status
register into the Interrupt Enable register in
zynq_gpio_restore_context API to fix the bug.
Fixes: e11de4de28c0 ("gpio: zynq: Add support for suspend resume")
Signed-off-by: Swapna Manupati <swapna.manupati@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Srinivas Neeli <srinivas.neeli@xilinx.com>
Link: https://lore.kernel.org/r/1577362338-28744-2-git-send-email-srinivas.neeli@xilinx.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit aa23ca3d98f756d5b1e503fb140665fb24a41a38 upstream.
On some laptops enabling wakeup on the GPIO interrupts used for ACPI _AEI
event handling causes spurious wakeups.
This commit adds a new honor_wakeup option, defaulting to true (our current
behavior), which can be used to disable wakeup on troublesome hardware
to avoid these spurious wakeups.
This is a workaround for an architectural problem with s2idle under Linux
where we do not have any mechanism to immediately go back to sleep after
wakeup events, other then for embedded-controller events using the standard
ACPI EC interface, for details see:
https://lore.kernel.org/linux-acpi/61450f9b-cbc6-0c09-8b3a-aff6bf9a0b3c@redhat.com/
One series of laptops which is not able to suspend without this workaround
is the HP x2 10 Cherry Trail models, this commit adds a DMI based quirk
which makes sets honor_wakeup to false on these models.
Cc: stable@vger.kernel.org
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20200105160357.97154-3-hdegoede@redhat.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1ad1b54099c231aed8f6f257065c1b322583f264 upstream.
Turn the existing run_edge_events_on_boot_blacklist dmi_system_id table
into a generic quirk table, storing the quirks in the driver_data ptr.
This is a preparation patch for adding other types of (DMI based) quirks.
Cc: stable@vger.kernel.org
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20200105160357.97154-2-hdegoede@redhat.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 256efaea1fdc4e38970489197409a26125ee0aaa upstream.
gpiolib has a corner case with open drain outputs that are emulated.
When such outputs are outputting a logic 1, emulation will set the
hardware to input mode, which will cause gpiod_get_direction() to
report that it is in input mode. This is different from the behaviour
with a true open-drain output.
Unify the semantics here.
Cc: <stable@vger.kernel.org>
Suggested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 4e50573f39229d5e9c985fa3b4923a8b29619ade ]
The per-SoC devtype structures can contain their own callbacks that
overwrite mpc8xxx_gpio_devtype_default.
The clear intention is that mpc8xxx_irq_set_type is used in case the SoC
does not specify a more specific callback. But what happens is that if
the SoC doesn't specify one, its .irq_set_type is de-facto NULL, and
this overwrites mpc8xxx_irq_set_type to a no-op. This means that the
following SoCs are affected:
- fsl,mpc8572-gpio
- fsl,ls1028a-gpio
- fsl,ls1088a-gpio
On these boards, the irq_set_type does exactly nothing, and the GPIO
controller keeps its GPICR register in the hardware-default state. On
the LS1028A, that is ACTIVE_BOTH, which means 2 interrupts are raised
even if the IRQ client requests LEVEL_HIGH. Another implication is that
the IRQs are not checked (e.g. level-triggered interrupts are not
rejected, although they are not supported).
Fixes: 82e39b0d8566 ("gpio: mpc8xxx: handle differences between incarnations at a single place")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20191115125551.31061-1-olteanv@gmail.com
Tested-by: Michael Walle <michael@walle.cc>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2727315df3f5ffbebcb174eed3153944a858b66f ]
The Terra Pad 1061 has the usual micro-USB-B id-pin handler, but instead
of controlling the actual micro-USB-B it turns the 5V boost for the
tablet's USB-A connector and its keyboard-cover connector off.
The actual micro-USB-B connector on the tablet is wired for charging only,
and its id pin is *not* connected to the GPIO which is used for the
(broken) id-pin event handler in the DSDT.
While at it not only add a comment why the Terra Pad 1061 is on the
blacklist, but also fix the missing comment for the Minix Neo Z83-4 entry.
Fixes: 61f7f7c8f978 ("gpiolib: acpi: Add gpiolib_acpi_run_edge_events_on_boot option and blacklist")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit b0391479ae04dfcbd208b9571c375064caad9a57 upstream.
When converting milliseconds to microseconds in commit fffa6af94894
("gpio: max77620: Use correct unit for debounce times") some ~1 ms gaps
were introduced between the various ranges supported by the controller.
Fix this by changing the start of each range to the value immediately
following the end of the previous range. This way a debounce time of,
say 8250 us will translate into 16 ms instead of returning an -EINVAL
error.
Typically the debounce delay is only ever set through device tree and
specified in milliseconds, so we can never really hit this issue because
debounce times are always a multiple of 1000 us.
The only notable exception for this is drivers/mmc/host/mmc-spi.c where
the CD GPIO is requested, which passes a 1 us debounce time. According
to a comment preceeding that code this should actually be 1 ms (i.e.
1000 us).
Reported-by: Pavel Machek <pavel@denx.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Acked-by: Pavel Machek <pavel@denx.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 70728c29465bc4bfa7a8c14304771eab77e923c7 ]
The priv->data->set can be NULL while flags contains GPIO_SYSCON_FEAT_OUT
and chip->set is valid pointer. This happens in case the controller uses
the default GPIO setter. Always use chip->set to access the setter to avoid
possible NULL pointer dereferencing.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit fffa6af94894126994a7600c6f6f09b892e89fa9 ]
The gpiod_set_debounce() function takes the debounce time in
microseconds. Adjust the switch/case values in the MAX77620 GPIO to use
the correct unit.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20191002122825.3948322-1-thierry.reding@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e735244e2cf068f98b6384681a38993e0517a838 ]
When emulating open-drain/open-source by not actively driving the output
lines - we're simply changing their mode to input. This is wrong as it
will then make it impossible to change the value of such line - it's now
considered to actually be in input mode. If we want to still use the
direction_input() callback for simplicity then we need to set FLAG_IS_OUT
manually in gpiod_direction_output() and not clear it in
gpio_set_open_drain_value_commit() and
gpio_set_open_source_value_commit().
Fixes: c663e5f56737 ("gpio: support native single-ended hardware drivers")
Cc: stable@vger.kernel.org
Reported-by: Kent Gibson <warthog618@gmail.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
[Bartosz: backported to v4.14]
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 5ca2f54b597c816df54ff1b28eb99cf7262b955d upstream.
lineevent_create should not allow any of GPIOHANDLE_REQUEST_OUTPUT,
GPIOHANDLE_REQUEST_OPEN_DRAIN or GPIOHANDLE_REQUEST_OPEN_SOURCE to be set.
Fixes: d7c51b47ac11 ("gpio: userspace ABI for reading/writing GPIO lines")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Kent Gibson <warthog618@gmail.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e95fbc130a162ba9ad956311b95aa0da269eea48 upstream.
linehandle_create should not allow both GPIOHANDLE_REQUEST_INPUT
and GPIOHANDLE_REQUEST_OUTPUT to be set.
Fixes: d7c51b47ac11 ("gpio: userspace ABI for reading/writing GPIO lines")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Kent Gibson <warthog618@gmail.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 61f7f7c8f978b1c0d80e43c83b7d110ca0496eb4 upstream.
Another day; another DSDT bug we need to workaround...
Since commit ca876c7483b6 ("gpiolib-acpi: make sure we trigger edge events
at least once on boot") we call _AEI edge handlers at boot.
In some rare cases this causes problems. One example of this is the Minix
Neo Z83-4 mini PC, this device has a clear DSDT bug where it has some copy
and pasted code for dealing with Micro USB-B connector host/device role
switching, while the mini PC does not even have a micro-USB connector.
This code, which should not be there, messes with the DDC data pin from
the HDMI connector (switching it to GPIO mode) breaking HDMI support.
To avoid problems like this, this commit adds a new
gpiolib_acpi.run_edge_events_on_boot kernel commandline option, which
allows disabling the running of _AEI edge event handlers at boot.
The default value is -1/auto which uses a DMI based blacklist, the initial
version of this blacklist contains the Neo Z83-4 fixing the HDMI breakage.
Cc: stable@vger.kernel.org
Cc: Daniel Drake <drake@endlessm.com>
Cc: Ian W MORRISON <ianwmorrison@gmail.com>
Reported-by: Ian W MORRISON <ianwmorrison@gmail.com>
Suggested-by: Ian W MORRISON <ianwmorrison@gmail.com>
Fixes: ca876c7483b6 ("gpiolib-acpi: make sure we trigger edge events at least once on boot")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20190827202835.213456-1-hdegoede@redhat.com
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Ian W MORRISON <ianwmorrison@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2c60e6b5c9241b24b8b523fefd3e44fb85622cda upstream.
If the driver doesn't support open-drain/source config options, we
emulate this behavior when setting the direction by calling
gpiod_direction_input() if the default value is 0 (open-source) or
1 (open-drain), thus not actively driving the line in those cases.
This however clears the FLAG_IS_OUT bit for the GPIO line descriptor
and makes the LINEINFO ioctl() incorrectly report this line's mode as
'input' to user-space.
This commit modifies the ioctl() to always set the GPIOLINE_FLAG_IS_OUT
bit in the lineinfo structure's flags field. Since it's impossible to
use the input mode and open-drain/source options at the same time, we
can be sure the reported information will be correct.
Fixes: 521a2ad6f862 ("gpio: add userspace ABI for GPIO line information")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Link: https://lore.kernel.org/r/20190806114151.17652-1-brgl@bgdev.pl
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 223ecaf140b1dd1c1d2a1a1d96281efc5c906984 upstream.
When a pin is active-low, logical trigger edge should be inverted to match
the same interrupt opportunity.
For example, a button pushed triggers falling edge in ACTIVE_HIGH case; in
ACTIVE_LOW case, the button pushed triggers rising edge. For user space the
IRQ requesting doesn't need to do any modification except to configuring
GPIOHANDLE_REQUEST_ACTIVE_LOW.
For example, we want to catch the event when the button is pushed. The
button on the original board drives level to be low when it is pushed, and
drives level to be high when it is released.
In user space we can do:
req.handleflags = GPIOHANDLE_REQUEST_INPUT;
req.eventflags = GPIOEVENT_REQUEST_FALLING_EDGE;
while (1) {
read(fd, &dat, sizeof(dat));
if (dat.id == GPIOEVENT_EVENT_FALLING_EDGE)
printf("button pushed\n");
}
Run the same logic on another board which the polarity of the button is
inverted; it drives level to be high when pushed, and level to be low when
released. For this inversion we add flag GPIOHANDLE_REQUEST_ACTIVE_LOW:
req.handleflags = GPIOHANDLE_REQUEST_INPUT |
GPIOHANDLE_REQUEST_ACTIVE_LOW;
req.eventflags = GPIOEVENT_REQUEST_FALLING_EDGE;
At the result, there are no any events caught when the button is pushed.
By the way, button releasing will emit a "falling" event. The timing of
"falling" catching is not expected.
Cc: stable@vger.kernel.org
Signed-off-by: Michael Wu <michael.wu@vatics.com>
Tested-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 3285170f28a850638794cdfe712eb6d93e51e706 ]
Commit 372e722ea4dd4ca1 ("gpiolib: use descriptors internally") renamed
the functions to use a "gpiod" prefix, and commit 79a9becda8940deb
("gpiolib: export descriptor-based GPIO interface") introduced the "raw"
variants, but both changes forgot to update the comments.
Readd a similar reference to gpiod_set_value(), which was accidentally
removed by commit 1e77fc82110ac36f ("gpio: Add missing open drain/source
handling to gpiod_set_value_cansleep()").
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20190701142738.25219-1-geert+renesas@glider.be
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c859e0d479b3b4f6132fc12637c51e01492f31f6 ]
Documentation states:
NOTE: There must be a correlation between the wake-up enable and
interrupt-enable registers. If a GPIO pin has a wake-up configured
on it, it must also have the corresponding interrupt enabled (on
one of the two interrupt lines).
Ensure that this condition is always satisfied by enabling the detection
events after enabling the interrupt, and disabling the detection before
disabling the interrupt. This ensures interrupt/wakeup events can not
happen until both the wakeup and interrupt enables correlate.
If we do any clearing, clear between the interrupt enable/disable and
trigger setting.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 64ea3e9094a1f13b96c33244a3fb3a0f45690bd2 ]
Commit 384ebe1c2849 ("gpio/omap: Add DT support to GPIO driver") added
the register definition tables to the gpio-omap driver. Subsequently to
that commit, commit 4e962e8998cc ("gpio/omap: remove cpu_is_omapxxxx()
checks from *_runtime_resume()") added definitions for irqstatus_raw*
registers to the legacy OMAP4 definitions, but missed the DT
definitions.
This causes an unintentional change of behaviour for the 1.101 errata
workaround on OMAP4 platforms. Fix this oversight.
Fixes: 4e962e8998cc ("gpio/omap: remove cpu_is_omapxxxx() checks from *_runtime_resume()")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e9646f0f5bb62b7d43f0968f39d536cfe7123b53 ]
The gpio-adp5588 driver uses interfaces that are provided by
GPIOLIB_IRQCHIP, so select that symbol in its Kconfig entry.
Fixes these build errors:
../drivers/gpio/gpio-adp5588.c: In function ‘adp5588_irq_handler’:
../drivers/gpio/gpio-adp5588.c:266:26: error: ‘struct gpio_chip’ has no member named ‘irq’
dev->gpio_chip.irq.domain, gpio));
^
../drivers/gpio/gpio-adp5588.c: In function ‘adp5588_irq_setup’:
../drivers/gpio/gpio-adp5588.c:298:2: error: implicit declaration of function ‘gpiochip_irqchip_add_nested’ [-Werror=implicit-function-declaration]
ret = gpiochip_irqchip_add_nested(&dev->gpio_chip,
^
../drivers/gpio/gpio-adp5588.c:307:2: error: implicit declaration of function ‘gpiochip_set_nested_irqchip’ [-Werror=implicit-function-declaration]
gpiochip_set_nested_irqchip(&dev->gpio_chip,
^
Fixes: 459773ae8dbb ("gpio: adp5588-gpio: support interrupt controller")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: linux-gpio@vger.kernel.org
Reviewed-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
