summaryrefslogtreecommitdiff
path: root/drivers/gpio
AgeCommit message (Collapse)AuthorFilesLines
2010-01-11gpio: adp5588-gpio: new driver for ADP5588 GPIO expandersMichael Hennerich3-0/+276
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Cc: Jean Delvare <khali@linux-fr.org> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-01-11gpiolib: fix poll(2) support reconfigure on sysfs polarity changeJani Nikula1-2/+0
Previously enabled poll(2) support on one edge was never reconfigured when sysfs polarity change was triggered from kernel, because 'struct device *dev' shadowed an earlier definition. Found by sparse, which I should've run much earlier. Signed-off-by: Jani Nikula <ext-jani.1.nikula@nokia.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-16gpiolib: add support for changing value polarity in sysfsJani Nikula1-12/+149
Drivers may use gpiolib sysfs as part of their public user space interface. The GPIO number and polarity might change from board to board. The gpio_export_link() call can be used to hide the GPIO number from user space. Add support for also hiding the GPIO line polarity changes from user space. Signed-off-by: Jani Nikula <ext-jani.1.nikula@nokia.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-16gpio: add GPIO driver for the Timberdale FPGARichard Röjfors3-0/+349
A GPIO driver for the Timberdale FPGA found on the Intel Atom board Russellville. The GPIO driver also has an IRQ-chip to support interrupts on the pins. Signed-off-by: Richard Röjfors <richard.rojfors@mocean-labs.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-16gpio: fix test on unsigned in lnw_irq_type()Roel Kluin1-1/+1
The wrong test was used, gpio is unsigned and it had an off-by-one. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Cc: Alek Du <alek.du@intel.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15cs5535: drop the Geode-specific MFGPT/GPIO codeAndres Salomon1-1/+1
With generic modular drivers handling all of this stuff, the geode-specific code can go away. The cs5535-gpio, cs5535-mfgpt, and cs5535-clockevt drivers now handle this. Signed-off-by: Andres Salomon <dilinger@collabora.co.uk> Cc: Jordan Crouse <jordan@cosmicpenguin.net> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: john stultz <johnstul@us.ibm.com> Cc: Chris Ball <cjb@laptop.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15cs5535-gpio: request function, mask & names addedTobias Mueller1-5/+78
Changed number of gpio pins to 32 (according to datasheet) Added mask to disable some pins Added gpio_request for checking mask and disabling special pin functions Added pin names [dilinger@collabora.co.uk: make printk usage consistent] Signed-off-by: Tobias Mueller <Tobias_Mueller@twam.info> Signed-off-by: Andres Salomon <dilinger@collabora.co.uk> Cc: Takashi Iwai <tiwai@suse.de> Cc: Jordan Crouse <jordan@cosmicpenguin.net> Cc: David Brownell <david-b@pacbell.net> Cc: Alessandro Zummo <alessandro.zummo@towertech.it> Signed-off-by: Andres Salomon <dilinger@collabora.co.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15cs5535-gpio: add AMD CS5535/CS5536 GPIO driver supportAndres Salomon3-0/+293
This creates a CS5535/CS5536 GPIO driver which uses a gpio_chip backend (allowing GPIO users to use the generic GPIO API if desired) while also allowing architecture-specific users directly (via the cs5535_gpio_* functions). Tested on an OLPC machine. Some Leemotes also use CS5536 (with a mips cpu), which is why this is in drivers/gpio rather than arch/x86. Currently, it conflicts with older geode GPIO support; once MFGPT support is reworked to also be more generic, the older geode code will be removed. Signed-off-by: Andres Salomon <dilinger@collabora.co.uk> Cc: Takashi Iwai <tiwai@suse.de> Cc: Jordan Crouse <jordan@cosmicpenguin.net> Cc: David Brownell <david-b@pacbell.net> Reviewed-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-13mfd: Rename all twl4030_i2c*Balaji T K1-9/+9
This patch renames function names like twl4030_i2c_write_u8, twl4030_i2c_read_u8 to twl_i2c_write_u8, twl_i2c_read_u8 and also common variable in twl-core.c Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Balaji T K <balajitk@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13mfd: Rename twl4030* driver files to enable re-useSantosh Shilimkar1-1/+1
The upcoming TWL6030 is companion chip for OMAP4 like the current TWL4030 for OMAP3. The common modules like RTC, Regulator creates opportunity to re-use the most of the code from twl4030. This patch renames few common drivers twl4030* files to twl* to enable the code re-use. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Balaji T K <balajitk@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13gpiolib: Implement gpio_to_irq() for wm831xMark Brown1-0/+13
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13gpio: adp5520: rename common defines and typosMichael Hennerich1-16/+20
The common adp5520 mfd defines were namespaced to avoid collisions, so update the define used in this driver accordingly. The structs were also renamed to fix a spelling typo. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13gpiolib: Make WM831x GPIO count dynamicMark Brown1-3/+1
This supports future devices with fewer GPIOs. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-02gpio: Langwell GPIO driver bugfixesAlek Du1-10/+1
- Remove wrong and unnecessary unmask operation - Remove extra GEDR reading This fixes the loss of interrupts which occurs when two or more pins are triggered in close succession. Signed-off-by: Alek Du <alek.du@intel.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-11-12gpiolib: fix device_create() result checkSergei Shtylyov1-4/+4
In case of failure, device_create() returns not NULL but the error code. The current code checks for non-NULL though which causes kernel oops in sysfs_create_group() when device_create() fails. Check for error using IS_ERR() and propagate the error value using PTR_ERR() instead of fixed -ENODEV code returned now... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-10-29twl4030-gpio: remove __devexit markings from remove funcMike Frysinger1-2/+3
The gpio_twl4030_probe() function calls gpio_twl4030_remove(), and the former has __devinit, so the latter cannot use __devexit. Otherwise we hit the section mismatch warning: WARNING: drivers/gpio/built-in.o(.devinit.text+0x71a): Section mismatch in reference from the function _gpio_twl4030_probe() to the function .devexit.text:_gpio_twl4030_remove() The function __devinit _gpio_twl4030_probe() references a function __devexit _gpio_twl4030_remove(). This is often seen when error handling in the init function uses functionality in the exit path. The fix is often to remove the __devexit annotation of _gpio_twl4030_remove() so it may be used outside an exit section. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-10-02const: constify remaining file_operationsAlexey Dobriyan1-1/+1
[akpm@linux-foundation.org: fix KVM] Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-23Merge branch 'i2c-for-linus' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging * 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: i2c: Clearly mark ACPI drivers as such i2c: Add driver for SMBus Control Method Interface i2c-pnx: Correct use of request_region/request_mem_region MAINTAINERS: Add maintainer for AT24 and PCA9564/PCA9665 i2c-piix4: Add AMD SB900 SMBus device ID i2c/chips: Remove deprecated pcf8574 driver i2c/chips: Remove deprecated pca9539 driver i2c/chips: Remove deprecated pcf8575 driver gpio/pcf857x: Copy i2c_device_id from old pcf8574 driver i2c/scx200_acb: Provide more information on bus errors i2c: Provide compatibility links for i2c adapters i2c: Convert i2c adapters to bus devices i2c: Convert i2c clients to a device type i2c/tsl2550: Use combined SMBus transactions i2c-taos-evm: Switch echo off to improve performance i2c: Drop unused i2c_driver.id field
2009-09-23gpio: gpio support for ADP5520/ADP5501 MFD PMICsMichael Hennerich3-0/+217
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-23gpiolib: allow poll() on valueDaniel Glöckner1-5/+203
Many gpio chips allow to generate interrupts when the value of a pin changes. This patch gives usermode application the opportunity to make use of this feature by calling poll(2) on the /sys/class/gpio/gpioN/value sysfs file. The edge to trigger can be set in the edge file in the same directory. Possible values are "none", "rising", "falling", and "both". Using level triggers is not possible with current sysfs since nothing changes the GPIO value (and the IRQ keeps triggering). Edge triggering will "just work". Note that if there was an event between read() and poll(), the poll() returns immediately. Also note that this version only supports true GPIO interrupts. Some later patch might be able to synthesize this behavior by timer-driven polling; some systems seem to need that. [dbrownell@users.sourceforge.net: align ids to 16 bit ids; whitespace] Signed-off-by: Daniel Glöckner <dg@emlix.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-23gpio: include <linux/gpio.h> not <asm/gpio.h>H Hartley Sweeten4-9/+4
Drivers should be including <linux/gpio.h> not <asm/gpio.h>. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-23gpio: pca953x: add support for MAX7315Alek Du1-0/+1
MAX7315 is pin and software compatible with PCA9534, so add it to the I2C device ID table of pca953x driver. http://www.datasheetcatalog.org/datasheet/maxim/MAX7315.pdf Signed-off-by: Alek Du <alek.du@intel.com> Acked-by: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-23gpio: add Intel Moorestown Platform Langwell chip gpio driverAlek Du3-0/+304
The Langwell chip is the IO hub for Intel Moorestown platform which has a 64-pin gpio block device inside. It is exposed as a dedicated PCI device. We use it to control outside peripheral as well as to do IRQ demuxing. The gpio block uses MSI to send level type interrupt to IOAPIC. Signed-off-by: Alek Du <alek.du@intel.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-23mfd/gpio: add a GPIO interface to the UCB1400 MFD chip driver via gpiolibMarek Vasut3-0/+138
Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: David Brownell <david-b@pacbell.net> Cc: Samuel Ortiz <sameo@openedhand.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-23gpio: add MC33880 driverRichard Röjfors3-0/+204
A GPIO driver for the Freescale MC33880 High/Low side switch Signed-off-by: Richard Röjfors <richard.rojfors.ext@mocean-labs.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-23gpiolib: allow exported GPIO nodes to be named using sysfs linksJani Nikula1-0/+45
Commit 926b663ce8215ba448960e1ff6e58b67a2c3b99b (gpiolib: allow GPIOs to be named) already provides naming on the chip level. This patch provides more flexibility by allowing multiple names where ever in sysfs on a per GPIO basis. Adapted from David Brownell's comments on a similar concept: http://lkml.org/lkml/2009/4/20/203. [randy.dunlap@oracle.com: fix build for CONFIG_GENERIC_GPIO=n] Signed-off-by: Jani Nikula <ext-jani.1.nikula@nokia.com> Acked-by: David Brownell <david-b@pacbell.net> Cc: Daniel Silverstone <dsilvers@simtec.co.uk> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-23spi: prefix modalias with "spi:"Anton Vorontsov2-0/+2
This makes it consistent with other buses (platform, i2c, vio, ...). I'm not sure why we use the prefixes, but there must be a reason. This was easy enough to do it, and I did it. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Jean Delvare <khali@linux-fr.org> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Dmitry Torokhov <dtor@mail.ru> Cc: Samuel Ortiz <sameo@openedhand.com> Cc: "John W. Linville" <linville@tuxdriver.com> Acked-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-21trivial: add __init/__exit macros in drivers/gpio/bt8xxgpio.cPeter Huewe1-2/+2
Trivial patch which adds the __init/__exit macro to the init/exit functions of drivers/gpio/bt8xxgpio.c Signed-off-by: Peter Huewe <peterhuewe@gmx.de> Acked-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-09-19gpio/pcf857x: Copy i2c_device_id from old pcf8574 driverWolfram Sang1-0/+1
The deprecated pcf8574 driver is going to be removed. Make sure the replacement driver inherits all i2c_device_ids for a smooth transition. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-09-17gpio: Add WM831X GPIO driverMark Brown3-0/+260
Add support for the GPIO pins on the WM831x. No direct support is currently supplied for configuring non-gpiolib functionality such as pull configuration and alternate functions, soft configuration of these will be provided in a future patch. Currently use of these pins as interrupts is not supported due to the ongoing issues with generic irq not support interrupt controllers on interrupt driven buses. Users can directly request the interrupts with the wm831x-specific APIs currently provided if required. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-07-12headers: smp_lock.h reduxAlexey Dobriyan1-1/+0
* Remove smp_lock.h from files which don't need it (including some headers!) * Add smp_lock.h to files which do need it * Make smp_lock.h include conditional in hardirq.h It's needed only for one kernel_locked() usage which is under CONFIG_PREEMPT This will make hardirq.h inclusion cheaper for every PREEMPT=n config (which includes allmodconfig/allyesconfig, BTW) Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-07-03Update Yoichi Yuasa's e-mail addressYoichi Yuasa1-3/+3
Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-07-03MIPS: Update VR41xx GPIO driver to use gpiolibYoichi Yuasa3-0/+593
Signed-off-by: Yoichi Yuasa <yyuasa@linux.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-07-01gpio: pl061: fix IRQ handling for GPIOs >= PL061_GPIO_NRBaruch Siach1-3/+14
IRQ handling is wrong for any GPIO >= PL061_GPIO_NR. Fix this by implementing and using a proper .to_irq method. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-07-01gpio: pl061: fix probe error handling codeBaruch Siach1-1/+2
Note that IRQ has not been initialized when kmalloc() fails. Also, use DECLARE_BITMAP() to make the code clearer. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-20gpio: driver for PrimeCell PL061 GPIO controllerBaruch Siach3-0/+348
This is a driver for the ARM PrimeCell PL061 GPIO AMBA peripheral. The driver is implemented using the gpiolib framework. This driver also includes support for the use of the PL061 as an interrupt controller (secondary). Signed-off-by: Baruch Siach <baruch@tkos.co.il> Cc: David Brownell <david-b@pacbell.net> Acked-by: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-19gpio: pca953x: Add support for PCA9556Nate Case1-0/+1
PCA9556 is the software-compatible predecessor to the PCA9557, so add it to the supported I2C device ID table. Signed-off-by: Nate Case <ncase@xes-inc.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-19gpio: pca953x: Get platform_data from OpenFirmwareNate Case1-5/+70
On OpenFirmware platforms, it makes the most sense to get platform_data from the device tree. Make an attempt to translate OF node properties into platform_data struct before bailing out. Note that the implementation approach taken differs from other device drivers that make use of device tree information. This is because I2C chips are already registered automatically by of_i2c, so we can get by with a small translator function in the driver. [akpm@linux-foundation.org: coding-style fixes] [akpm@linux-foundation.org: kfree(NULL) is legal] Signed-off-by: Nate Case <ncase@xes-inc.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-19gpio: max7301: add missing __devexit markingMike Frysinger1-1/+1
The remove member of the spi_driver max7301_driver uses __devexit_p(), so the remove function itself should be marked with __devexit. Even more so considering the probe function is marked with __devinit. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Juergen Beisert <j.beisert@pengutronix.de> Cc: Dmitry Baryshkov <dbaryshkov@gmail.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-19pca953x: support GPIOLIB GPIO namingDaniel Silverstone1-0/+4
Add support to the PCA953x driver to use the GPIOLIB naming facility for GPIOs. Signed-off-by: Daniel Silverstone <dsilvers@simtec.co.uk> Cc: Ben Gardner <bgardner@wabtec.com> Cc: Jean Delvare <khali@linux-fr.org> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-21microblaze: Kconfig: Enable drivers for MicroblazeMichal Simek1-1/+1
Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-04-04Merge branch 'for-linus' of ↵Linus Torvalds1-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (28 commits) trivial: Update my email address trivial: NULL noise: drivers/mtd/tests/mtd_*test.c trivial: NULL noise: drivers/media/dvb/frontends/drx397xD_fw.h trivial: Fix misspelling of "Celsius". trivial: remove unused variable 'path' in alloc_file() trivial: fix a pdlfush -> pdflush typo in comment trivial: jbd header comment typo fix for JBD_PARANOID_IOFAIL trivial: wusb: Storage class should be before const qualifier trivial: drivers/char/bsr.c: Storage class should be before const qualifier trivial: h8300: Storage class should be before const qualifier trivial: fix where cgroup documentation is not correctly referred to trivial: Give the right path in Documentation example trivial: MTD: remove EOL from MODULE_DESCRIPTION trivial: Fix typo in bio_split()'s documentation trivial: PWM: fix of #endif comment trivial: fix typos/grammar errors in Kconfig texts trivial: Fix misspelling of firmware trivial: cgroups: documentation typo and spelling corrections trivial: Update contact info for Jochen Hein trivial: fix typo "resgister" -> "register" ...
2009-04-03gpio: gpio_{request,free}() now required (feature removal)David Brownell1-4/+8
We want to phase out the GPIO "autorequest" mechanism in gpiolib and require all callers to use gpio_request(). - Update feature-removal-schedule - Update the documentation now - Convert the relevant pr_warning() in gpiolib to a WARN() so folk using this mechanism get a noisy stack dump Some drivers and board init code will probably need to change. Implementations not using gpiolib will still be fine; they are already required to implement gpio_{request,free}() stubs. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-03gpiolib: allow GPIOs to be namedDaniel Silverstone1-1/+6
Allow GPIOs in GPIOLIB chips to be named. This name is then used when the GPIO is exported to sysfs, although it could be used elsewhere if deemed useful. Signed-off-by: Daniel Silverstone <dsilvers@simtec.co.uk> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-30trivial: fix typos/grammar errors in Kconfig textsMatt LaPlante1-3/+3
Signed-off-by: Matt LaPlante <kernel1@cyberdogtech.com> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-03-25gpio: struct device - replace bus_id with dev_name(), dev_set_name()Kay Sievers1-1/+1
Cc: Michael Buesch <mb@bu3sch.de> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
2009-01-30gpiolib: fix request related issueMagnus Damm1-0/+1
Fix request-already-requested handling in gpio_request(). Signed-off-by: Magnus Damm <damm@igel.co.jp> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Cc: <stable@kernel.org> [2.6.28.x] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-16gpio: fix probe() error return in gpio driver probesBen Dooks5-12/+24
A number of drivers in drivers/gpio return -ENODEV when confronted with missing setup parameters such as the platform data. However, returning -ENODEV causes the driver layer to silently ignore the driver as it assumes the probe did not find anything and was only speculative. To make life easier to discern why a driver is not being attached, change to returning -EINVAL, which is a better description of the fact that the driver data was not valid. Also add a set of dev_dbg() statements to the error paths to provide an better explanation of the error as there may be more that one point in the driver. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6Linus Torvalds1-1/+1
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: (60 commits) uio: make uio_info's name and version const UIO: Documentation for UIO ioport info handling UIO: Pass information about ioports to userspace (V2) UIO: uio_pdrv_genirq: allow custom irq_flags UIO: use pci_ioremap_bar() in drivers/uio arm: struct device - replace bus_id with dev_name(), dev_set_name() libata: struct device - replace bus_id with dev_name(), dev_set_name() avr: struct device - replace bus_id with dev_name(), dev_set_name() block: struct device - replace bus_id with dev_name(), dev_set_name() chris: struct device - replace bus_id with dev_name(), dev_set_name() dmi: struct device - replace bus_id with dev_name(), dev_set_name() gadget: struct device - replace bus_id with dev_name(), dev_set_name() gpio: struct device - replace bus_id with dev_name(), dev_set_name() gpu: struct device - replace bus_id with dev_name(), dev_set_name() hwmon: struct device - replace bus_id with dev_name(), dev_set_name() i2o: struct device - replace bus_id with dev_name(), dev_set_name() IA64: struct device - replace bus_id with dev_name(), dev_set_name() i7300_idle: struct device - replace bus_id with dev_name(), dev_set_name() infiniband: struct device - replace bus_id with dev_name(), dev_set_name() ISDN: struct device - replace bus_id with dev_name(), dev_set_name() ...
2009-01-07gpio: pca953x handles more chips, i2c fault codesDavid Brownell2-8/+11
Minor updates to the pca953x GPIO expander driver: handle several more compatible parts, and stop assuming that the I2C layer's return codes are garbage (that's now been fixed). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Eric Miao <eric.miao@marvell.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-30 12:36:23 +0300