| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
[ Upstream commit 1e876e5a0875e71e34148c9feb2eedd3bf6b2b43 ]
The reference obtained by calling usb_get_dev() is not released in the
gpio_mpsse_probe() error paths. Fix that by using device managed helper
functions. Also remove the usb_put_dev() call in the disconnect function
since now it will be released automatically.
Cc: stable@vger.kernel.org
Fixes: c46a74ff05c0 ("gpio: add support for FTDI's MPSSE as GPIO")
Signed-off-by: Abdun Nihaal <nihaal@cse.iitm.ac.in>
Link: https://lore.kernel.org/r/20251226060414.20785-1-nihaal@cse.iitm.ac.in
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit f13b0f72af238d63bb9a2e417657da8b45d72544 ]
Builds out a facility for specifying compatible lines directions and
labels for MPSSE-based devices.
* dir_in/out are bitmask of lines that can go in/out. 1 means
compatible, 0 means incompatible.
* names is an array of line names which will be exposed to userspace.
Also changes the chip label format to include some more useful
information about the device to help identify it from userspace.
Signed-off-by: Mary Strodl <mstrodl@csh.rit.edu>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20251014133530.3592716-4-mstrodl@csh.rit.edu
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Stable-dep-of: 1e876e5a0875 ("gpio: mpsse: fix reference leak in gpio_mpsse_probe() error paths")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 179ef1127d7a4f09f0e741fa9f30b8a8e7886271 ]
When an IRQ worker is running, unplugging the device would cause a
crash. The sealevel hardware this driver was written for was not
hotpluggable, so I never realized it.
This change uses a spinlock to protect a list of workers, which
it tears down on disconnect.
Signed-off-by: Mary Strodl <mstrodl@csh.rit.edu>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20251014133530.3592716-3-mstrodl@csh.rit.edu
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Stable-dep-of: 1e876e5a0875 ("gpio: mpsse: fix reference leak in gpio_mpsse_probe() error paths")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 014a17deb41201449f76df2b20c857a9c3294a7c ]
GPIO drivers with latch input support may miss short pulses on input
pins even when input latching is enabled. The generic interrupt logic in
the pca953x driver reports interrupts by comparing the current input
value against the previously sampled one and only signals an event when
a level change is observed between two reads.
For short pulses, the first edge is captured when the input register is
read, but if the signal returns to its previous level before the read,
the second edge is not observed. As a result, successive pulses can
produce identical input values at read time and no level change is
detected, causing interrupts to be missed. Below timing diagram shows
this situation where the top signal is the input pin level and the
bottom signal indicates the latched value.
─────┐ ┌──*───────────────┐ ┌──*─────────────────┐ ┌──*───
│ │ . │ │ . │ │ .
│ │ │ │ │ │ │ │ │
└──*──┘ │ └──*──┘ │ └──*──┘ │
Input │ │ │ │ │ │
▼ │ ▼ │ ▼ │
IRQ │ IRQ │ IRQ │
. . .
─────┐ .┌──────────────┐ .┌────────────────┐ .┌──
│ │ │ │ │ │
│ │ │ │ │ │
└────────*┘ └────────*┘ └────────*┘
Latched │ │ │
▼ ▼ ▼
READ 0 READ 0 READ 0
NO CHANGE NO CHANGE
PCAL variants provide an interrupt status register that records which
pins triggered an interrupt, but the status and input registers cannot
be read atomically. The interrupt status is only cleared when the input
port is read, and the input value must also be read to determine the
triggering edge. If another interrupt occurs on a different line after
the status register has been read but before the input register is
sampled, that event will not be reflected in the earlier status
snapshot, so relying solely on the interrupt status register is also
insufficient.
Support for input latching and interrupt status handling was previously
added by [1], but the interrupt status-based logic was reverted by [2]
due to these issues. This patch addresses the original problem by
combining both sources of information. Events indicated by the interrupt
status register are merged with events detected through the existing
level-change logic. As a result:
* short pulses, whose second edges are invisible, are detected via the
interrupt status register, and
* interrupts that occur between the status and input reads are still
caught by the generic level-change logic.
This significantly improves robustness on devices that signal interrupts
as short pulses, while avoiding the issues that led to the earlier
reversion. In practice, even if only the first edge of a pulse is
observable, the interrupt is reliably detected.
This fixes missed interrupts from an Ilitek touch controller with its
interrupt line connected to a PCAL6416A, where active-low pulses are
approximately 200 us long.
[1] commit 44896beae605 ("gpio: pca953x: add PCAL9535 interrupt support for Galileo Gen2")
[2] commit d6179f6c6204 ("gpio: pca953x: Improve interrupt support")
Fixes: d6179f6c6204 ("gpio: pca953x: Improve interrupt support")
Signed-off-by: Ernest Van Hoecke <ernest.vanhoecke@toradex.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20251217153050.142057-1-ernestvanhoecke@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a7ac22d53d0990152b108c3f4fe30df45fcb0181 ]
If two drivers were calling gpiochip_add_data_with_key(), one may be
traversing the srcu-protected list in gpio_name_to_desc(), meanwhile
other has just added its gdev in gpiodev_add_to_list_unlocked().
This creates a non-mutexed and non-protected timeframe, when one
instance is dereferencing and using &gdev->srcu, before the other
has initialized it, resulting in crash:
[ 4.935481] Unable to handle kernel paging request at virtual address ffff800272bcc000
[ 4.943396] Mem abort info:
[ 4.943400] ESR = 0x0000000096000005
[ 4.943403] EC = 0x25: DABT (current EL), IL = 32 bits
[ 4.943407] SET = 0, FnV = 0
[ 4.943410] EA = 0, S1PTW = 0
[ 4.943413] FSC = 0x05: level 1 translation fault
[ 4.943416] Data abort info:
[ 4.943418] ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000
[ 4.946220] CM = 0, WnR = 0, TnD = 0, TagAccess = 0
[ 4.955261] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[ 4.955268] swapper pgtable: 4k pages, 48-bit VAs, pgdp=0000000038e6c000
[ 4.961449] [ffff800272bcc000] pgd=0000000000000000
[ 4.969203] , p4d=1000000039739003
[ 4.979730] , pud=0000000000000000
[ 4.980210] phandle (CPU): 0x0000005e, phandle (BE): 0x5e000000 for node "reset"
[ 4.991736] Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP
...
[ 5.121359] pc : __srcu_read_lock+0x44/0x98
[ 5.131091] lr : gpio_name_to_desc+0x60/0x1a0
[ 5.153671] sp : ffff8000833bb430
[ 5.298440]
[ 5.298443] Call trace:
[ 5.298445] __srcu_read_lock+0x44/0x98
[ 5.309484] gpio_name_to_desc+0x60/0x1a0
[ 5.320692] gpiochip_add_data_with_key+0x488/0xf00
5.946419] ---[ end trace 0000000000000000 ]---
Move initialization code for gdev fields before it is added to
gpio_devices, with adjacent initialization code.
Adjust goto statements to reflect modified order of operations
Fixes: 47d8b4c1d868 ("gpio: add SRCU infrastructure to struct gpio_device")
Reviewed-by: Jakub Lewalski <jakub.lewalski@nokia.com>
Signed-off-by: Paweł Narewski <pawel.narewski@nokia.com>
[Bartosz: fixed a build issue, removed stray newline]
Link: https://lore.kernel.org/r/20251224082641.10769-1-bartosz.golaszewski@oss.qualcomm.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d4f335b410ddbe3e99f48f8b5ea78a25041274f1 ]
The chip_$level() macros take struct gpio_chip as argument so make it
follow the convention of using the 'gpiochip_' prefix.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Stable-dep-of: a7ac22d53d09 ("gpiolib: fix race condition for gdev->srcu")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0ba6f1ed3808b1f095fbdb490006f0ecd00f52bd ]
We don't need to add additional logs when returning -ENOMEM so remove
unnecessary error messages.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Stable-dep-of: a7ac22d53d09 ("gpiolib: fix race condition for gdev->srcu")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a05543d6b05ba998fdbb4b383319ae5121bb7407 ]
We always call superio_enter() in it87_gpio_direction_out() but only
call superio_exit() if the call to it87_gpio_set() succeeds. Move the
label to balance the calls in error path as well.
Fixes: ef877a159072 ("gpio: it87: use new line value setter callbacks")
Reported-by: Daniel Gibson <daniel@gibson.sh>
Closes: https://lore.kernel.org/all/bd0a00e3-9b8c-43e8-8772-e67b91f4c71e@gibson.sh/
Link: https://lore.kernel.org/r/20251210055026.23146-1-bartosz.golaszewski@oss.qualcomm.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 20cf2aed89ac6d78a0122e31c875228e15247194 upstream.
The GPIO controller is configured as non-sleeping but it uses generic
pinctrl helpers which use a mutex for synchronization.
This can cause the following lockdep splat with shared GPIOs enabled on
boards which have multiple devices using the same GPIO:
BUG: sleeping function called from invalid context at
kernel/locking/mutex.c:591
in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 12, name:
kworker/u16:0
preempt_count: 1, expected: 0
RCU nest depth: 0, expected: 0
6 locks held by kworker/u16:0/12:
#0: ffff0001f0018d48 ((wq_completion)events_unbound#2){+.+.}-{0:0},
at: process_one_work+0x18c/0x604
#1: ffff8000842dbdf0 (deferred_probe_work){+.+.}-{0:0}, at:
process_one_work+0x1b4/0x604
#2: ffff0001f18498f8 (&dev->mutex){....}-{4:4}, at:
__device_attach+0x38/0x1b0
#3: ffff0001f75f1e90 (&gdev->srcu){.+.?}-{0:0}, at:
gpiod_direction_output_raw_commit+0x0/0x360
#4: ffff0001f46e3db8 (&shared_desc->spinlock){....}-{3:3}, at:
gpio_shared_proxy_direction_output+0xd0/0x144 [gpio_shared_proxy]
#5: ffff0001f180ee90 (&gdev->srcu){.+.?}-{0:0}, at:
gpiod_direction_output_raw_commit+0x0/0x360
irq event stamp: 81450
hardirqs last enabled at (81449): [<ffff8000813acba4>]
_raw_spin_unlock_irqrestore+0x74/0x78
hardirqs last disabled at (81450): [<ffff8000813abfb8>]
_raw_spin_lock_irqsave+0x84/0x88
softirqs last enabled at (79616): [<ffff8000811455fc>]
__alloc_skb+0x17c/0x1e8
softirqs last disabled at (79614): [<ffff8000811455fc>]
__alloc_skb+0x17c/0x1e8
CPU: 2 UID: 0 PID: 12 Comm: kworker/u16:0 Not tainted
6.19.0-rc4-next-20260105+ #11975 PREEMPT
Hardware name: Hardkernel ODROID-M1 (DT)
Workqueue: events_unbound deferred_probe_work_func
Call trace:
show_stack+0x18/0x24 (C)
dump_stack_lvl+0x90/0xd0
dump_stack+0x18/0x24
__might_resched+0x144/0x248
__might_sleep+0x48/0x98
__mutex_lock+0x5c/0x894
mutex_lock_nested+0x24/0x30
pinctrl_get_device_gpio_range+0x44/0x128
pinctrl_gpio_direction+0x3c/0xe0
pinctrl_gpio_direction_output+0x14/0x20
rockchip_gpio_direction_output+0xb8/0x19c
gpiochip_direction_output+0x38/0x94
gpiod_direction_output_raw_commit+0x1d8/0x360
gpiod_direction_output_nonotify+0x7c/0x230
gpiod_direction_output+0x34/0xf8
gpio_shared_proxy_direction_output+0xec/0x144 [gpio_shared_proxy]
gpiochip_direction_output+0x38/0x94
gpiod_direction_output_raw_commit+0x1d8/0x360
gpiod_direction_output_nonotify+0x7c/0x230
gpiod_configure_flags+0xbc/0x480
gpiod_find_and_request+0x1a0/0x574
gpiod_get_index+0x58/0x84
devm_gpiod_get_index+0x20/0xb4
devm_gpiod_get_optional+0x18/0x30
rockchip_pcie_probe+0x98/0x380
platform_probe+0x5c/0xac
really_probe+0xbc/0x298
Fixes: 936ee2675eee ("gpio/rockchip: add driver for rockchip gpio")
Cc: stable@vger.kernel.org
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Closes: https://lore.kernel.org/all/d035fc29-3b03-4cd6-b8ec-001f93540bc6@samsung.com/
Acked-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20260106090011.21603-1-bartosz.golaszewski@oss.qualcomm.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This reverts commit e5d527be7e6984882306b49c067f1fec18920735.
This software node change doesn't actually fix any current issues
with the kernel, it is an improvement to the lookup process rather
than fixing a live bug. It also causes a couple of regressions with
shipping laptops, which relied on the label based lookup.
There is a fix for the regressions in mainline, the first 5 patches
of [1]. However, those patches are fairly substantial changes and
given the patch causing the regression doesn't actually fix a bug
it seems better to just revert it in stable.
CC: stable@vger.kernel.org # 6.18
Link: https://lore.kernel.org/linux-sound/20251120-reset-gpios-swnodes-v7-0-a100493a0f4b@linaro.org/ [1]
Closes: https://github.com/thesofproject/linux/issues/5599
Closes: https://github.com/thesofproject/linux/issues/5603
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit dae9750105cf93ac1e156ef91f4beeb53bd64777 upstream.
The manuals of 2K2000 says both BIT_CTRL_MODE and BYTE_CTRL_MODE are
supported but the latter is recommended. Also on 2K3000, per the ACPI
DSDT the GPIO controller is compatible with 2K2000, but it fails to
operate GPIOs 62 and 63 (and maybe others) using BIT_CTRL_MODE.
Using BYTE_CTRL_MODE also makes those 2K3000 GPIOs work.
Fixes: 3feb70a61740 ("gpio: loongson: add more gpio chip support")
Cc: stable@vger.kernel.org
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Link: https://lore.kernel.org/r/20251128075033.255821-1-xry111@xry111.site
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2d967310c49ed93ac11cef408a55ddf15c3dd52e upstream.
Dell Precision 7780 often wakes up on its own from suspend. Sometimes
wake up happens immediately (i. e. within 7 seconds), sometimes it happens
after, say, 30 minutes.
Fixes: 1796f808e4bb ("HID: i2c-hid: acpi: Stop setting wakeup_capable")
Link: https://lore.kernel.org/linux-i2c/197ae95ffd8.dc819e60457077.7692120488609091556@zohomail.com/
Cc: stable@vger.kernel.org
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Askar Safin <safinaskar@gmail.com>
Link: https://lore.kernel.org/r/20251206180414.3183334-2-safinaskar@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 52721cfc78c76b09c66e092b52617006390ae96a upstream.
Call gpiochip_remove() to free the resources allocated by
gpiochip_add_data() in error path.
Fixes: 553b75d4bfe9 ("gpio: regmap: Allow to allocate regmap-irq device")
Fixes: ae495810cffe ("gpio: regmap: add the .fixed_direction_output configuration parameter")
CC: stable@vger.kernel.org
Co-developed-by: WangYuli <wangyl5933@chinaunicom.cn>
Signed-off-by: WangYuli <wangyl5933@chinaunicom.cn>
Signed-off-by: Wentao Guan <guanwentao@uniontech.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20251204101303.30353-1-guanwentao@uniontech.com
[Bartosz: reworked the commit message]
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit dd44d4d0c55a4ecf5eabf7856f96ed47e0684780 ]
Selecting OF_GPIO is generally not allowed, it always gets enabled
when both GPIOLIB and OF are turned on.
The tb10x driver now warns about this after it was enabled for
compile-testing:
WARNING: unmet direct dependencies detected for OF_GPIO
Depends on [n]: GPIOLIB [=y] && OF [=n] && HAS_IOMEM [=y]
Selected by [y]:
- GPIO_TB10X [=y] && GPIOLIB [=y] && HAS_IOMEM [=y] && (ARC_PLAT_TB10X || COMPILE_TEST [=y])
OF_GPIO is not required for compile-testing and is already enabled
when the driver is usable, so just drop the 'select' line.
Fixes: 682fbb18e14c ("gpio: tb10x: allow building the module with COMPILE_TEST=y")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20251205095429.1291866-1-arnd@kernel.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
With the final call to fput() on a file descriptor, the release action
may be deferred and scheduled on a work queue. The reference count of
that descriptor is still zero and it must not be used. It's possible
that a GPIO change, we want to notify the user-space about, happens
AFTER the reference count on the file descriptor associated with the
character device went down to zero but BEFORE the .release() callback
was called from the workqueue and so BEFORE we unregistered from the
notifier.
Using the regular get_file() routine in this situation triggers the
following warning:
struct file::f_count incremented from zero; use-after-free condition present!
So use the get_file_active() variant that will return NULL on file
descriptors that have been or are being released.
Fixes: 40b7c49950bd ("gpio: cdev: put emitting the line state events on a workqueue")
Reported-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Closes: https://lore.kernel.org/all/5d605f7fc99456804911403102a4fe999a14cc85.camel@siemens.com/
Tested-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Link: https://lore.kernel.org/r/20251117-gpio-cdev-get-file-v1-1-28a16b5985b8@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
tb10x_set_bits() is not referenced anywhere leading to W=1 warning:
gpio-tb10x.c:59:20: error: unused function 'tb10x_set_bits' [-Werror,-Wunused-function]
After its removal, tb10x_reg_write() becomes unused as well.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20251106-gpio-of-match-v1-1-50c7115a045e@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Restore the set_config operation, as it was lost during the refactoring of
the gpio-aggregator driver while creating the gpio forwarder library.
Fixes: b31c68fd851e7 ("gpio: aggregator: handle runtime registration of gpio_desc in gpiochip_fwd")
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202509281206.a7334ae8-lkp@intel.com
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20250929-gpio-aggregator-fix-set-config-callback-v1-1-39046e1da609@bootlin.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
If the memory allocation in gpiolib_seq_start() fails, the s->private
field remains uninitialized and is later dereferenced without checking
in gpiolib_seq_stop(). Initialize s->private to NULL before calling
kzalloc() and check it before dereferencing it.
Fixes: e348544f7994 ("gpio: protect the list of GPIO devices with SRCU")
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20251103141132.53471-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Looking up a GPIO controller by label that is the name of the software
node is wonky at best - the GPIO controller driver is free to set
a different label than the name of its firmware node. We're already being
passed a firmware node handle attached to the GPIO device to
swnode_get_gpio_device() so use it instead for a more precise lookup.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Fixes: e7f9ff5dc90c ("gpiolib: add support for software nodes")
Link: https://lore.kernel.org/r/20251103-reset-gpios-swnodes-v4-4-6461800b6775@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
The generic_handle_domain_irq() function resolves the hardware IRQ
internally. The driver performed a duplicative mapping by calling
irq_find_mapping() first, which could lead to an RCU stall.
Delete the redundant irq_find_mapping() call and pass the hardware IRQ
directly to generic_handle_domain_irq().
Fixes: c5a4b6fd31e8 ("gpio: Add support for Intel LJCA USB GPIO driver")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Link: https://lore.kernel.org/r/20251023070231.1305-1-vulab@iscas.ac.cn
[Bartosz: remove unused variable]
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-gpio-intel into gpio/for-current
intel-gpio fixes for v6.18-1
* Make set debounce errors non-fatal in GPIO ACPI case
* Use human readable error when printing a message in GPIO ACPI code
|
|
One of the coccinelle recipe suggests to use %pe when we deal with
an error pointer. Do it so.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Julia Lawall <julia.lawall@inria.fr>
Closes: https://lore.kernel.org/r/202510231350.calxvXIm-lkp@intel.com/
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Commit 16c07342b542 ("gpiolib: acpi: Program debounce when finding GPIO")
adds a gpio_set_debounce_timeout() call to acpi_find_gpio() and makes
acpi_find_gpio() fail if this fails.
But gpio_set_debounce_timeout() failing is a somewhat normal occurrence,
since not all debounce values are supported on all GPIO/pinctrl chips.
Making this an error for example break getting the card-detect GPIO for
the micro-sd slot found on many Bay Trail tablets, breaking support for
the micro-sd slot on these tablets.
acpi_request_own_gpiod() already treats gpio_set_debounce_timeout()
failures as non-fatal, just warning about them.
Add a acpi_gpio_set_debounce_timeout() helper which wraps
gpio_set_debounce_timeout() and warns on failures and replace both existing
gpio_set_debounce_timeout() calls with the helper.
Since the helper only warns on failures this fixes the card-detect issue.
Fixes: 16c07342b542 ("gpiolib: acpi: Program debounce when finding GPIO")
Cc: stable@vger.kernel.org
Cc: Mario Limonciello <superm1@kernel.org>
Signed-off-by: Hans de Goede <hansg@kernel.org>
Acked-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/stable/20250920201200.20611-1-hansg%40kernel.org
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
The direction of the IDIO-16 GPIO lines is fixed with the first 16 lines
as output and the remaining 16 lines as input. Set the gpio_config
fixed_direction_output member to represent the fixed direction of the
GPIO lines.
Fixes: db02247827ef ("gpio: idio-16: Migrate to the regmap API")
Reported-by: Mark Cave-Ayland <mark.caveayland@nutanix.com>
Closes: https://lore.kernel.org/r/9b0375fd-235f-4ee1-a7fa-daca296ef6bf@nutanix.com
Suggested-by: Michael Walle <mwalle@kernel.org>
Cc: stable@vger.kernel.org # ae495810cffe: gpio: regmap: add the .fixed_direction_output configuration parameter
Cc: stable@vger.kernel.org
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: William Breathitt Gray <wbg@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20251020-fix-gpio-idio-16-regmap-v2-3-ebeb50e93c33@kernel.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
There are GPIO controllers such as the one present in the LX2160ARDB
QIXIS FPGA which have fixed-direction input and output GPIO lines mixed
together in a single register. This cannot be modeled using the
gpio-regmap as-is since there is no way to present the true direction of
a GPIO line.
In order to make this use case possible, add a new configuration
parameter - fixed_direction_output - into the gpio_regmap_config
structure. This will enable user drivers to provide a bitmap that
represents the fixed direction of the GPIO lines.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Attempting to load the pci-idio-16 module fails during regmap
initialization with a return error -EINVAL. This is a result of the
regmap cache failing initialization. Set the idio_16_regmap_config
max_register member to fix this failure.
Fixes: 73d8f3efc5c2 ("gpio: pci-idio-16: Migrate to the regmap API")
Reported-by: Mark Cave-Ayland <mark.caveayland@nutanix.com>
Closes: https://lore.kernel.org/r/9b0375fd-235f-4ee1-a7fa-daca296ef6bf@nutanix.com
Suggested-by: Mark Cave-Ayland <mark.caveayland@nutanix.com>
Cc: stable@vger.kernel.org
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: William Breathitt Gray <wbg@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20251020-fix-gpio-idio-16-regmap-v2-2-ebeb50e93c33@kernel.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Attempting to load the 104-idio-16 module fails during regmap
initialization with a return error -EINVAL. This is a result of the
regmap cache failing initialization. Set the idio_16_regmap_config
max_register member to fix this failure.
Fixes: 2c210c9a34a3 ("gpio: 104-idio-16: Migrate to the regmap API")
Reported-by: Mark Cave-Ayland <mark.caveayland@nutanix.com>
Closes: https://lore.kernel.org/r/9b0375fd-235f-4ee1-a7fa-daca296ef6bf@nutanix.com
Suggested-by: Mark Cave-Ayland <mark.caveayland@nutanix.com>
Cc: stable@vger.kernel.org
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: William Breathitt Gray <wbg@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20251020-fix-gpio-idio-16-regmap-v2-1-ebeb50e93c33@kernel.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
The slimbus regmap passed to the GPIO driver down from MFD does not use
fast_io. This means a mutex is used for locking and thus this GPIO chip
must not be used in atomic context. Change the can_sleep switch in
struct gpio_chip to true.
Fixes: 59c324683400 ("gpio: wcd934x: Add support to wcd934x gpio controller")
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Add "INTC10D1" ACPI device-id for MTL-CVF devices, like the Dell Latitude
7450.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2368506
Signed-off-by: Hans de Goede <hansg@kernel.org>
Acked-by: Israel Cepeda <israel.a.cepeda.lopez@intel.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and thunderbolt drivers for 6.18-rc1. It
was another normal development cycle, with lots of the usual drivers
getting updates:
- Thunderbolt driver cleanups and additions
- dwc3 driver updates
- dwc2 driver updates
- typec driver updates
- xhci driver updates and additions
- offload USB engine updates for better power management
- unused tracepoint removals
- usb gadget fixes and updates as more users start to rely on these
drivers instead of the "old" function gadget drivers
- new USB device ids
- other minor driver USB driver updates
- new USB I/O driver framework and driver additions"
The last item, the usb i/o driver, has an i2c and gpio driver added
through this tree. Those drivers were acked by the respective
subsystem maintainers.
All of these have been in linux-next for a while"
* tag 'usb-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (132 commits)
usb: vhci-hcd: Prevent suspending virtually attached devices
USB: serial: option: add SIMCom 8230C compositions
thunderbolt: Fix use-after-free in tb_dp_dprx_work
usb: xhci: align PORTSC trace with one-based port numbering
usb: xhci: correct indentation for PORTSC tracing function
usb: xhci: improve TR Dequeue Pointer mask
usb: xhci-pci: add support for hosts with zero USB3 ports
usb: xhci: Update a comment about Stop Endpoint retries
Revert "usb: xhci: Avoid Stop Endpoint retry loop if the endpoint seems Running"
usb: gadget: f_rndis: Refactor bind path to use __free()
usb: gadget: f_ecm: Refactor bind path to use __free()
usb: gadget: f_acm: Refactor bind path to use __free()
usb: gadget: f_ncm: Refactor bind path to use __free()
usb: gadget: Introduce free_usb_request helper
usb: gadget: Store endpoint pointer in usb_request
usb: host: xhci-rcar: Add Renesas RZ/G3E USB3 Host driver support
usb: host: xhci-plat: Add .post_resume_quirk for struct xhci_plat_priv
usb: host: xhci-rcar: Move R-Car reg definitions
dt-bindings: usb: Document Renesas RZ/G3E USB3HOST
usb: gadget: f_fs: Fix epfile null pointer access after ep enable.
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"We have GPIO awareness in the pin control core and an interesting
AAEON driver.
Core changes:
- Allow pins to be identified/marked as GPIO mode with a special
callback.
The pin controller core is now "aware" if a pin is in GPIO mode if
the callback is implemented in the driver, and can thus be marked
as "strict", i.e. disallowing simultaneous use of a line as GPIO
and another function such as I2C.
This is enabled in the Qualcomm TLMM driver and also implemeted
from day 1 in the new Broadcom STB driver
- Rename the pin config option PIN_CONFIG_OUTPUT to PIN_CONFIG_LEVEL
to better describe what the config is doing, as well as making it
more intuitive what shall be returned when reading this property
New drivers:
- Qualcomm SDM660 LPASS LPI TLMM pin controller subdriver
- Qualcomm Glymur family pin controller driver
- Broadcom STB family pin controller driver
- Tegra186 pin controller driver
- AAEON UP pin controller support.
This is some special pin controller that works as an external
advanced line MUX and amplifier for signals from an Intel SoC. A
cooperative effort with the GPIO maintainer was needed to reach a
solution where we reuse code from the GPIO aggregator/forwarder
driver
- Renesas RZ/T2H and RZ/N2H pin controller support
- Axis ARTPEC-8 subdriver for the Samsung pin controller driver
Improvements:
- Output enable (OEN) support in the Renesas RZG2L driver
- Properly support bias pull up/down in the pinctrl-single driver
- Move over all GPIO portions using generic MMIO GPIO to the new
generic GPIO chip management which has a nice and separate API
- Proper DT bindings for some older Broadcom SoCs
- External GPIO (EGPIO) support in the Qualcomm SM8250
Deleted code:
- Dropped the now unused Samsung S3C24xx drivers"
* tag 'pinctrl-v6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (75 commits)
pinctrl: use more common syntax for compound literals
pinctrl: Simplify printks with pOF format
pinctrl: qcom: Add SDM660 LPASS LPI TLMM
dt-bindings: pinctrl: qcom: Add SDM660 LPI pinctrl
pinctrl: qcom: lpass-lpi: Add ability to use custom pin offsets
pinctrl: qcom: Add glymur pinctrl driver
dt-bindings: pinctrl: qcom: Add Glymur pinctrl
pinctrl: qcom: sm8250: Add egpio support
pinctrl: generic: rename PIN_CONFIG_OUTPUT to LEVEL
pinctrl: keembay: fix double free in keembay_build_functions()
pinctrl: spacemit: fix typo in PRI_TDI pin name
pinctrl: eswin: Fix regulator error check and Kconfig dependency
pinctrl: bcm: Add STB family pin controller driver
dt-bindings: pinctrl: Add support for Broadcom STB pin controller
pinctrl: qcom: make the pinmuxing strict
pinctrl: qcom: mark the `gpio` and `egpio` pins function as non-strict functions
pinctrl: qcom: add infrastructure for marking pin functions as GPIOs
pinctrl: allow to mark pin functions as requestable GPIOs
pinctrl: qcom: use generic pin function helpers
pinctrl: make struct pinfunction a pointer in struct function_desc
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"There are two new drivers and support for more models in existing
ones.
The generic GPIO API has been reworked and all users converted
which allowed us to move the fields specific to the generic GPIO
implementation out of the high-level struct gpio_chip into its own
structure that wraps the gpio_chip.
Other than that, there's nothing too exciting. Mostly minor tweaks and
fixes all over the place, some refactoring and some small new features
in helper modules.
GPIO core:
- add support for sparse pin ranges to the glue between GPIO and
pinctrl
- use a common prefix across all GPIO descriptor flags for improved
namespacing
New drivers:
- add new GPIO driver for the Nuvoton NCT6694
- add new GPIO driver for MAX7360
Driver improvements:
- add support for Tegra 256 to the gpio-tegra186 driver
- add support for Loongson-2K0300 to the gpio-loongson-64bit driver
- refactor the gpio-aggregator module to expose its GPIO forwarder
API to other in-kernel users (to enable merging of a new pinctrl
driver that uses it)
- convert all remaining drivers to using the modernized generic GPIO
chip API and remove the old interface
- stop displaying global GPIO numbers in debugfs output of controller
drivers
- extend the gpio-regmap helper with a new config option and improve
its support for GPIO interrupts
- remove redundant fast_io parameter from regmap configs in GPIO
drivers that already use MMIO regmaps which imply it
- add support for a new model in gpio-mmio: ixp4xx expansion bus
- order includes alphabetically in a few drivers for better
readability
- use generic device properties where applicable
- use devm_mutex_init() where applicable
- extend build coverage of drivers by enabling more to be compiled
with COMPILE_TEST enabled
- allow building gpio-stmpe as a module
- use dev_err_probe() where it makes sense in drivers
Late driver fixes:
- fix setting GPIO direction to output in gpio-mpfs
Documentation:
- document the usage of software nodes with GPIO chips
Device-tree bindings:
- Add DT bindings documents for new hardware: Tegra256, MAX7360
- Document a new model in Loongson bindings: LS2K0300
- Document a new model using the generic GPIO binding: IXP4xx
- Convert the DT binding for fsl,mxs-pinctrl to YAML
- fix the schema ID in the "trivial" GPIO schema
- describe GPIO hogs in the generic GPIO binding"
* tag 'gpio-updates-for-v6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (122 commits)
gpio: mpfs: fix setting gpio direction to output
gpio: generic: move GPIO_GENERIC_ flags to the correct header
gpio: generic: rename BGPIOF_ flags to GPIO_GENERIC_
gpio: nomadik: fix the debugfs helper stub
MAINTAINERS: Add entry on MAX7360 driver
input: misc: Add support for MAX7360 rotary
input: keyboard: Add support for MAX7360 keypad
gpio: max7360: Add MAX7360 gpio support
gpio: regmap: Allow to provide init_valid_mask callback
gpio: regmap: Allow to allocate regmap-irq device
pwm: max7360: Add MAX7360 PWM support
pinctrl: Add MAX7360 pinctrl driver
mfd: Add max7360 support
dt-bindings: mfd: gpio: Add MAX7360
rtc: Add Nuvoton NCT6694 RTC support
hwmon: Add Nuvoton NCT6694 HWMON support
watchdog: Add Nuvoton NCT6694 WDT support
can: Add Nuvoton NCT6694 CANFD support
i2c: Add Nuvoton NCT6694 I2C support
gpio: Add Nuvoton NCT6694 GPIO support
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Madhavan Srinivasan:
- powerpc support for BPF arena and arena atomics
- Patches to switch to msi parent domain (per-device MSI domains)
- Add a lock contention tracepoint in the queued spinlock slowpath
- Fixes for underflow in pseries/powernv msi and pci paths
- Switch from legacy-of-mm-gpiochip dependency to platform driver
- Fixes for handling TLB misses
- Introduce support for powerpc papr-hvpipe
- Add vpa-dtl PMU driver for pseries platform
- Misc fixes and cleanups
Thanks to Aboorva Devarajan, Aditya Bodkhe, Andrew Donnellan, Athira
Rajeev, Cédric Le Goater, Christophe Leroy, Erhard Furtner, Gautam
Menghani, Geert Uytterhoeven, Haren Myneni, Hari Bathini, Joe Lawrence,
Kajol Jain, Kienan Stewart, Linus Walleij, Mahesh Salgaonkar, Nam Cao,
Nicolas Schier, Nysal Jan K.A., Ritesh Harjani (IBM), Ruben Wauters,
Saket Kumar Bhaskar, Shashank MS, Shrikanth Hegde, Tejas Manhas, Thomas
Gleixner, Thomas Huth, Thorsten Blum, Tyrel Datwyler, and Venkat Rao
Bagalkote.
* tag 'powerpc-6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (49 commits)
powerpc/pseries: Define __u{8,32} types in papr_hvpipe_hdr struct
genirq/msi: Remove msi_post_free()
powerpc/perf/vpa-dtl: Add documentation for VPA dispatch trace log PMU
powerpc/perf/vpa-dtl: Handle the writing of perf record when aux wake up is needed
powerpc/perf/vpa-dtl: Add support to capture DTL data in aux buffer
powerpc/perf/vpa-dtl: Add support to setup and free aux buffer for capturing DTL data
docs: ABI: sysfs-bus-event_source-devices-vpa-dtl: Document sysfs event format entries for vpa_dtl pmu
powerpc/vpa_dtl: Add interface to expose vpa dtl counters via perf
powerpc/time: Expose boot_tb via accessor
powerpc/32: Remove PAGE_KERNEL_TEXT to fix startup failure
powerpc/fprobe: fix updated fprobe for function-graph tracer
powerpc/ftrace: support CONFIG_FUNCTION_GRAPH_RETVAL
powerpc64/modules: replace stub allocation sentinel with an explicit counter
powerpc64/modules: correctly iterate over stubs in setup_ftrace_ool_stubs
powerpc/ftrace: ensure ftrace record ops are always set for NOPs
powerpc/603: Really copy kernel PGD entries into all PGDIRs
powerpc/8xx: Remove left-over instruction and comments in DataStoreTLBMiss handler
powerpc/pseries: HVPIPE changes to support migration
powerpc/pseries: Enable hvpipe with ibm,set-system-parameter RTAS
powerpc/pseries: Enable HVPIPE event message interrupt
...
|
|
mpfs_gpio_direction_output() actually sets the line to input mode.
Use the correct register settings for output mode so that this function
actually works as intended.
This was a copy-paste mistake made when converting to regmap during the
driver submission process. It went unnoticed because my test for output
mode is toggling LEDs on an Icicle kit which functions with the
incorrect code. The internal reporter has yet to test the patch, but on
their system the incorrect setting may be the reason for failures to
drive the GPIO lines on the BeagleV-fire board.
CC: stable@vger.kernel.org
Fixes: a987b78f3615e ("gpio: mpfs: add polarfire soc gpio support")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250925-boogieman-carrot-82989ff75d10@spud
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Make the flags passed to gpio_generic_chip_init() use the same prefix as
the rest of the modernized generic GPIO chip API.
Link: https://lore.kernel.org/r/20250917-gpio-generic-flags-v1-1-69f51fee8c89@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
The gpio_regmap structure is leaked on the error path. Fix this by
jumping to the appropriate kfree instead of returning directly.
Fixes: db305161880a ("gpio: regmap: Allow ngpio to be read from the property")
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Suggested-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: Michael Walle <mwalle@kernel.org>
Link: https://lore.kernel.org/r/20250922142427.3310221-7-ioana.ciornei@nxp.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
When a software-node gets added to a device which already has another
fwnode as primary node it will become the secondary fwnode for that
device.
Currently if a software-node with GPIO properties ends up as the secondary
fwnode then gpiod_find_by_fwnode() will fail to find the GPIOs.
Add a new gpiod_fwnode_lookup() helper which falls back to calling
gpiod_find_by_fwnode() with the secondary fwnode if the GPIO was not
found in the primary fwnode.
Fixes: e7f9ff5dc90c ("gpiolib: add support for software nodes")
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hansg@kernel.org>
Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://lore.kernel.org/r/20250920200955.20403-1-hansg@kernel.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into gpio/for-next
Pull changes from the immutable branch between MFD, GPIO, Input, Pinctrl
and PWM trees containing the GPIO driver for max7360.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into gpio/for-next
Pull changes from the immutable branch between MFD, GPIO, HWMON, I2C,
CAN, RTC and Watchdog trees containing GPIO support for Nuvoton NCT6694.
|
|
Add driver for Maxim Integrated MAX7360 GPIO/GPO controller.
Two sets of GPIOs are provided by the device:
- Up to 8 GPIOs, shared with the PWM and rotary encoder functionalities.
These GPIOs also provide interrupts on input changes.
- Up to 6 GPOs, on unused keypad columns pins.
Co-developed-by: Kamel Bouhara <kamel.bouhara@bootlin.com>
Signed-off-by: Kamel Bouhara <kamel.bouhara@bootlin.com>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
Link: https://lore.kernel.org/r/20250824-mdb-max7360-support-v14-7-435cfda2b1ea@bootlin.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Allows to populate the gpio_regmap_config structure with
init_valid_mask() callback to set on the final gpio_chip structure.
Reviewed-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
Link: https://lore.kernel.org/r/20250824-mdb-max7360-support-v14-6-435cfda2b1ea@bootlin.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
GPIO controller often have support for IRQ: allow to easily allocate
both gpio-regmap and regmap-irq in one operation.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
Link: https://lore.kernel.org/r/20250824-mdb-max7360-support-v14-5-435cfda2b1ea@bootlin.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
This driver supports GPIO and IRQ functionality for NCT6694 MFD
device based on USB interface.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Ming Yu <a0282524688@gmail.com>
Link: https://lore.kernel.org/r/20250912091952.1169369-3-a0282524688@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-gpio-intel into gpio/for-current
intel-gpio fixes for v6.17-rc7
* Fix a regression to make GpioInt() by index work again
* Ingnore spurious wakeups from touchpad on GPD G1619-05
* Accept debounce from GpioIo() resources
|
|
Since commit 7c010d463372 ("gpiolib: acpi: Make sure we fill struct
acpi_gpio_info"), uninitialized acpi_gpio_info struct are passed to
__acpi_find_gpio() and later in the call stack info->quirks is used in
acpi_populate_gpio_lookup. This breaks the i2c_hid_cpi driver:
[ 58.122916] i2c_hid_acpi i2c-UNIW0001:00: HID over i2c has not been provided an Int IRQ
[ 58.123097] i2c_hid_acpi i2c-UNIW0001:00: probe with driver i2c_hid_acpi failed with error -22
Fix this by initializing the acpi_gpio_info pass to __acpi_find_gpio()
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220388
Fixes: 7c010d463372 ("gpiolib: acpi: Make sure we fill struct acpi_gpio_info")
Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Tested-by: Hans de Goede <hansg@kernel.org>
Reviewed-by: Hans de Goede <hansg@kernel.org>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Tested-By: Calvin Owens <calvin@wbinvd.org>
Cc: stable@vger.kernel.org
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
We need the USB fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add a a driver for the GPIO auxbus child device of the Intel USBIO USB
IO-expander used by the MIPI cameras on various new (Meteor Lake and
later) Intel laptops.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Co-developed-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Israel Cepeda <israel.a.cepeda.lopez@intel.com>
Link: https://lore.kernel.org/r/20250911181343.77398-3-hansg@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
With all users of bgpio_init() converted to using the modernized generic
GPIO chip API, we can now move the gpio-mmio-specific fields out of
struct gpio_chip and into the dedicated struct gpio_generic_chip. To
that end: adjust the gpio-mmio driver to the new layout, update the
docs, etc.
The changes in gpio-mlxbf2.c and gpio-mpc8xxx.c are here and not in their
respective conversion commits because the former passes the address of
the generic chip's lock to the __releases() annotation and we cannot
really hide it while gpio-mpc8xxx.c accesses the shadow registers in a
driver-specific workaround and there's no reason to make them available
in a public API.
Also: drop the relevant task from TODO as it's now done.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250910-gpio-mmio-gpio-conv-part4-v2-15-f3d1a4c57124@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Convert the driver to using the new generic GPIO chip interfaces from
linux/gpio/generic.h.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250910-gpio-mmio-gpio-conv-part4-v2-14-f3d1a4c57124@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Convert the driver to using the new generic GPIO chip interfaces from
linux/gpio/generic.h.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250910-gpio-mmio-gpio-conv-part4-v2-13-f3d1a4c57124@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
