summaryrefslogtreecommitdiff
path: root/drivers/gpio/gpio-mxc.c
AgeCommit message (Collapse)AuthorFilesLines
2023-01-25gpio: mxc: Unlock on error path in mxc_flip_edge()Dan Carpenter1-1/+2
We recently added locking to this function but one error path was over looked. Drop the lock before returning. Fixes: e5464277625c ("gpio: mxc: Protect GPIO irqchip RMW with bgpio spinlock") Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Marek Vasut <marex@denx.de> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-01-16gpio: mxc: Always set GPIOs used as interrupt source to INPUT modeMarek Vasut1-1/+1
Always configure GPIO pins which are used as interrupt source as INPUTs. In case the default pin configuration is OUTPUT, or the prior stage does configure the pins as OUTPUT, then Linux will not reconfigure the pin as INPUT and no interrupts are received. Always configure the interrupt source GPIO pin as input to fix the above case. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Fixes: 07bd1a6cc7cbb ("MXC arch: Add gpio support for the whole platform") Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-01-16gpio: mxc: Protect GPIO irqchip RMW with bgpio spinlockMarek Vasut1-0/+11
The driver currently performs register read-modify-write without locking in its irqchip part, this could lead to a race condition when configuring interrupt mode setting. Add the missing bgpio spinlock lock/unlock around the register read-modify-write. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Marc Zyngier <maz@kernel.org> Fixes: 07bd1a6cc7cbb ("MXC arch: Add gpio support for the whole platform") Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2022-11-08gpio: mxc: enable pad wakeup on i.MX8x platformsShenwei Wang1-1/+91
On i.MX8QM/QXP/DXL SoCs, even a GPIO is selected as the wakeup source, the GPIO block will be powered off when system enters into suspend state. This can greatly reduce the power consumption of suspend state because the whole partition can be shutdown. This is called PAD wakeup feature on i.MX8x platform. This patch adds the noirq suspend/resume hooks and uses the pad wakeup feature as the default wakeup method for GPIO modules on i.MX8QM/QXP/DXL platforms. Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Link: https://lore.kernel.org/r/20221027130859.1444412-6-shenwei.wang@nxp.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-08-12gpio: Bulk conversion to generic_handle_domain_irq()Marc Zyngier1-1/+1
Wherever possible, replace constructs that match either generic_handle_irq(irq_find_mapping()) or generic_handle_irq(irq_linear_revmap()) to a single call to generic_handle_domain_irq(). Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Marc Zyngier <maz@kernel.org>
2021-06-21gpio: mxc: Fix disabled interrupt wake-up supportLoic Poulain1-1/+1
A disabled/masked interrupt marked as wakeup source must be re-enable and unmasked in order to be able to wake-up the host. That can be done by flaging the irqchip with IRQCHIP_ENABLE_WAKEUP_ON_SUSPEND. Note: It 'sometimes' works without that change, but only thanks to the lazy generic interrupt disabling (keeping interrupt unmasked). Reported-by: Michal Koziel <michal.koziel@emlogic.no> Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-11-18gpio: mxc: Convert the driver to DT-onlyFabio Estevam1-80/+22
Since 5.10-rc1 i.MX is a devicetree-only platform, so simplify the code by removing the unused non-DT support. Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20201117105917.27591-1-festevam@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-09-29gpio: mxc: Support module buildAnson Huang1-0/+6
Change config to tristate, add module device table, module author, description and license to support module build for i.MX GPIO driver. As this is a SoC GPIO module, it provides common functions for most of the peripheral devices, such as GPIO pins control, secondary interrupt controller for GPIO pins IRQ etc., without GPIO driver, most of the peripheral devices will NOT work properly, so GPIO module is similar with clock, pinctrl driver that should be loaded ONCE and never unloaded. Since MXC GPIO driver needs to have init function to register syscore ops once, here still use subsys_initcall(), NOT module_platform_driver(). Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Link: https://lore.kernel.org/r/1600320829-1453-1-git-send-email-Anson.Huang@nxp.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-04-02gpio: Unconditionally assign .request()/.free()Thierry Reding1-5/+2
The gpiochip_generic_request() and gpiochip_generic_free() functions can now deal properly with chips that don't have any pin-ranges defined, so they can be assigned unconditionally. Suggested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20200401200527.2982450-1-thierry.reding@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-10-01gpio: mxc: Only get the second IRQ when there is more than one IRQAnson Huang1-3/+10
On some of i.MX SoCs like i.MX8QXP, there is ONLY one IRQ for each GPIO bank, so it is better to check the IRQ count before getting second IRQ to avoid below error message during probe: [ 1.070908] gpio-mxc 5d080000.gpio: IRQ index 1 not found [ 1.077420] gpio-mxc 5d090000.gpio: IRQ index 1 not found [ 1.083766] gpio-mxc 5d0a0000.gpio: IRQ index 1 not found [ 1.090122] gpio-mxc 5d0b0000.gpio: IRQ index 1 not found [ 1.096470] gpio-mxc 5d0c0000.gpio: IRQ index 1 not found [ 1.102804] gpio-mxc 5d0d0000.gpio: IRQ index 1 not found [ 1.109144] gpio-mxc 5d0e0000.gpio: IRQ index 1 not found [ 1.115475] gpio-mxc 5d0f0000.gpio: IRQ index 1 not found Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-08-02gpio: mxc: Use devm_clk_get_optional instead of devm_clk_getAnson Huang1-6/+3
i.MX SoC's GPIO clock is optional, so it is better to use devm_clk_get_optional instead of devm_clk_get. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-04-04drivers: gpio: mxc: use devm_platform_ioremap_resource()Enrico Weigelt, metux IT consult1-3/+1
Use the new helper that wraps the calls to platform_get_resource() and devm_ioremap_resource() together. Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-02-25gpio: mxc: add check to return defer probe if clock tree NOT readyAnson Huang1-1/+4
On i.MX8MQ platform, clock driver uses platform driver model and it is probed after GPIO driver, so when GPIO driver fails to get clock, it should check the error type to decide whether to return defer probe or just ignore the clock operation. Fixes: 2808801aab8a ("gpio: mxc: add clock operation") Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-11-17gpio: mxc: move gpio noirq suspend/resume to syscore phaseAnson Huang1-15/+24
During noirq suspend/resume phase, GPIO irq could arrive and its registers like IMR will be changed by irq handle process, to make the GPIO registers exactly when it is powered ON after resume, move the GPIO noirq suspend/resume callback to syscore suspend/resume phase, local irq is disabled at this phase so GPIO registers are atomic. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-11-05gpio: gpio-mxc: simplify getting .driver_dataWolfram Sang1-4/+2
We should get 'driver_data' from 'struct device' directly. Going via platform_device is an unneeded step back and forth. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-07-29gpio: mxc: add power management supportAnson Huang1-0/+73
GPIO registers could lose context on i.MX7D, when enter LPSR mode, the whole SoC will be powered off except LPSR domain, GPIO banks will lose context in this case, need to restore the context after resume from LPSR mode. This patch adds new compatible string for i.MX7D which supports GPIO power off feature in suspend, and adds the GPIO save/restore operations in noirq suspend/resume phase, since GPIO is fundamental module which could be used by other peripherals' resume phase. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-05-24gpio: mxc: Switch to SPDX identifierFabio Estevam1-21/+8
Adopt the SPDX license identifier headers to ease license compliance management. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-05-24gpio: mxc: add clock operationAnson Huang1-0/+14
Some i.MX SoCs have GPIO clock gates in CCM CCGR, such as i.MX6SLL, need to enable clocks before accessing GPIO registers, add optional clock operation for GPIO driver. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-05-16gpio: mxc: Remove reliance on <linux/gpio.h>Linus Walleij1-6/+3
This is a driver so we should only include <linux/gpio/driver.h>. However this driver was using gpio_get_value() to fetch the current value of a GPIO used as IRQ line to determine trigger direction, so we need a better way than looping over the global GPIO numberspace. Fix this by just calling the .get() function in the GPIO chip, as we don't want to end up creating a consumer dependency on ourselves. Cc: Vladimir Zapolskiy <vz@mleia.com> Cc: Fabio Estevam <fabio.estevam@nxp.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-08-21gpio: mxc: use devres for irq generic chipBartosz Golaszewski1-5/+10
Use resource managed variants of irq_alloc_generic_chip() and irq_setup_generic_chip(). Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-08-21gpio: mxc: disallow unbinding the driverBartosz Golaszewski1-0/+1
This driver is non-modular so explicitly disallow a driver unbind. Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-08-14gpio: gpio-mxc: gpio_set_wake_irq() use proper return valuesPhilipp Rosenberger1-5/+6
Errors from enable_irq_wake() in gpio_set_wake_irq() were silently ignored. Thus led to the problem that gpio_set_wake_irq() always returned successfully, even if enable_irq_wake() returned an error. Signed-off-by: Philipp Rosenberger <p.rosenberger@linutronix.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-08-01gpio: gpio-mxc: Fix: higher 16 GPIOs usable as wake sourcePhilipp Rosenberger1-0/+3
In the function gpio_set_wake_irq(), port->irq_high is only checked for zero. As platform_get_irq() returns a value less then zero if no interrupt was found, any gpio >= 16 was handled like an irq_high interrupt was available. On iMX27 for example no high interrupt is available. This lead to the problem that only some gpios (the lower 16) were useable as wake sources. Signed-off-by: Philipp Rosenberger <p.rosenberger@linutronix.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-03-15gpio: mxc: use devm_irq_alloc_descs()Bartosz Golaszewski1-4/+2
This driver never frees the interrupt descriptors it allocates. Fix it by using the resource managed version of irq_alloc_descs(). Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-10-05Merge tag 'gpio-v4.9-1' of ↵Linus Torvalds1-8/+2
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO changes for the v4.9 series: Subsystem improvements: - do away with the last users of the obsolete Kconfig options ARCH_REQUIRE_GPIOLIB and ARCH_WANT_OPTIONAL_GPIOLIB (the latter always sounded like an item on a wishlist to Santa Claus to me). We can now select GPIOLIB and be done with it, for all archs. After some struggle it even work on UM. Not that it has GPIO, but if it wants to, it can select the library. - continued efforts to make drivers properly either tristate or bool. - introduce a warning for drivers assigning default triggers to their irqchip lines when probed from device tree, so we find and fix these ambigous drivers. It is agreed that in the OF config path, the device tree defines trigger characteristics. - the same warning, mutatis mutandis, for ACPI-probed GPIO irqchips. - we introduce the ability to mark certain IRQ lines as "unusable" as they can be taken by BIOS/firmware, unrouted in silicon and generally nasty if you use them, and such things. This is put to good use in the STMPE driver and also in the Cherryview pin control driver. - a new "mockup" virtual GPIO device that can be used for testing. The plan is to add unit tests under tools/* for exercising this device and verify that the kernel code paths are working as they should. - make memory-mapped I/O-drivers depend on HAS_IOMEM. This was implicit all the time, but when people started building UM with allyesconfig or allmodconfig it exploded in their face. - move some stray bits of device tree and ACPI HW description callbacks down into their respective implementation silo. These were causing issues when compiling on !HAS_IOMEM as well, so now eventually UM compiles the GPIOLIB library if it wants to. New drivers: - new driver for the Aspeed GPIO front-end companion to the pin controller merged through the pin control tree. - new driver for the LP873x PMIC GPIO portions. - new driver for Technologic Systems' I2C FPGA GPIO such as TS4900, TS-7970, TS-7990 and TS-4100. - new driver for the Broadcom BCM63xx series including BCM6338 and BCM6345. - new driver for the Intel WhiskeyCove PMIC GPIO. - new driver for the Allwinner AXP209 PMIC GPIO portions. - new driver for Diamond Systems 48 line GPIO-MM, another of these port-mapped I/O expansion cards. - support the STMicroelectronics STMPE1600 variant in the STMPE driver. Driver improvements: - the STMPE driver now supports rising/falling edge detection properly for IRQs. - the PCA954x will now fetch and enable its VCC regulator properly. - major rework of the PCA953x driver with the goal of eventually switching it over to use regmap and thus modernize it even more. - switch the IOP driver to use the generic MMIO GPIO library. - move the ages old HTC EGPIO (extended GPIO) GPIO expander driver over to this subsystem from MFD, achieveing some separation of concerns" * tag 'gpio-v4.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (81 commits) gpio: add missing static inline gpio: OF: localize some gpiochip init functions gpio: acpi: separation of concerns gpio: OF: separation of concerns gpio: make memory-mapped drivers depend on HAS_IOMEM gpio: stmpe: use BIT() macro gpio: stmpe: forbid unused lines to be mapped as IRQs mfd/gpio: Move HTC GPIO driver to GPIO subsystem gpio: MAINTAINERS: Add an entry for GPIO mockup driver gpio/mockup: add virtual gpio device gpio: Added zynq specific check for special pins on bank zero gpio: axp209: Implement get_direction gpio: aspeed: remove redundant return value check gpio: loongson1: remove redundant return value check ARM: omap2: fix missing include gpio: tc3589x: fix up complaints on unsigned gpio: tc3589x: add .get_direction() and small cleanup gpio: f7188x: use gpiochip_get_data instead of container_of gpio: tps65218: use devm_gpiochip_add_data() for gpio registration gpio: aspeed: fix return value check in aspeed_gpio_probe() ...
2016-09-12gpio: mxc: add generic gpio request/free callbacks to pinctrlVladimir Zapolskiy1-0/+5
If a GPIO controller description in board DTB contains information about mappings between GPIOs and pads under IOMUX control use it to request and free GPIOs with respect to pinctrl/pinmux subsystems. One of immediate positive functional changes is inability to request non-existing GPIOs, i.e. if there is no pad such. Also pinctrl/pinmux may now properly account pads occupied by requested GPIOs. The change has no effect, if "gpio-ranges" property is not found including the case if a board has no DTB firmware. Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-12gpio: mxc: shift gpio_mxc_init() to subsys_initcall levelVladimir Zapolskiy1-1/+1
In general situation on-SoC GPIO controller drivers should be probed after pinctrl/pinmux controller driver, because on-SoC GPIOs utilize a pin/pad as a resource provided and controlled by pinctrl subsystem. This is stated in multiple places, e.g. from drivers/Makefile: GPIO must come after pinctrl as gpios may need to mux pins etc Looking at Freescale iMX SoC series specifics, imx*_pinctrl_init() functions are called at arch_initcall and postcore_initcall init levels, so the change of initcall level for gpio-mxc driver from postcore_initcall to subsys_initcall level is sufficient. Also note that the most of GPIO controller drivers settled at subsys_initcall level. If pinctrl subsystem manages pads with GPIO functions, the change is needed to avoid unwanted driver probe deferrals during kernel boot. Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-08-23gpio: mxc: drop unused MODULE_ tags from non-modular codePaul Gortmaker1-8/+2
The Kconfig currently controlling compilation of this code is: drivers/gpio/Kconfig:config GPIO_MXC drivers/gpio/Kconfig: def_bool y ...meaning that it currently is not being built as a module by anyone. Lets remove the couple traces of modular infrastructure use, so that when reading the driver there is no doubt it is builtin-only. We delete the MODULE_LICENSE tag etc. since all that information was (or is now) contained at the top of the file in the comments. Note the original e-mail had a missing/typo'd @ symbol anyway. We don't replace module.h with init.h since the file already has that. Cc: Alexandre Courbot <gnurou@gmail.com> Cc: Daniel Mack <daniel@caiaq.de> Cc: Juergen Beisert <kernel@pengutronix.de> Cc: linux-gpio@vger.kernel.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-23gpio: mxc: Use devm_gpiochip_add_data() for gpio registrationLaxman Dewangan1-4/+2
Use devm_gpiochip_add_data() for GPIO registration and clean the error path. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
2016-01-05gpio: generic: factor into gpio_chip structLinus Walleij1-15/+12
The separate struct bgpio_chip has been a pain to handle, both by being confusingly similar in name to struct gpio_chip and for being contained inside a struct so that struct gpio_chip is contained in a struct contained in a struct, making several steps of dereferencing necessary. Make things simpler: include the fields directly into <linux/gpio/driver.h>, #ifdef:ed for CONFIG_GENERIC_GPIO, and get rid of the <linux/basic_mmio_gpio.h> altogether. Prefix some of the member variables with bgpio_* and add proper kerneldoc while we're at it. Modify all users to handle the change and use a struct gpio_chip directly. And while we're at it: replace all container_of() dereferencing by gpiochip_get_data() and registering the gpio_chip with gpiochip_add_data(). Cc: arm@kernel.org Cc: Alexander Shiyan <shc_work@mail.ru> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Kukjin Kim <kgene@kernel.org> Cc: Alexandre Courbot <gnurou@gmail.com> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Nicolas Pitre <nicolas.pitre@linaro.org> Cc: Olof Johansson <olof@lixom.net> Cc: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Cc: Rabin Vincent <rabin@rab.in> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-omap@vger.kernel.org Cc: linux-samsung-soc@vger.kernel.org Cc: bcm-kernel-feedback-list@broadcom.com Acked-by: Gregory Fong <gregory.0xf0@gmail.com> Acked-by: Liviu Dudau <Liviu.Dudau@arm.com> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-15gpio-mxc: stop including <asm-generic/bug>Christoph Hellwig1-1/+1
<asm-generic/bug> contains the default implementation of BUG() and friends, which architectures may decide to use. The proper way to get them is <linux/bug.h>, so use that. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-09-18Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq updates from Thomas Gleixner: "This is a rather large update post rc1 due to the final steps of cleanups and API changes which had to wait for the preparatory patches to hit your tree. - Regression fixes for ARM GIC irqchips - Regression fixes and lockdep anotations for renesas irq chips - The leftovers of the cleanup and preparatory patches which have been ignored by maintainers - Final conversions of the newly merged users of obsolete APIs - Final removal of obsolete APIs - Final removal of ARM artifacts which had been introduced during the conversion of ARM to the generic interrupt code. - Final split of the irq_data into chip specific and common data to reflect the needs of hierarchical irq domains. - Treewide removal of the first argument of interrupt flow handlers, i.e. the irq number, which is not used by the majority of handlers and simple to retrieve from the other argument the irq descriptor. - A few comment updates and build warning fixes" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (40 commits) arm64: Remove ununsed set_irq_flags ARM: Remove ununsed set_irq_flags sh: Kill off set_irq_flags usage irqchip: Kill off set_irq_flags usage gpu/drm: Kill off set_irq_flags usage genirq: Remove irq argument from irq flow handlers genirq: Move field 'msi_desc' from irq_data into irq_common_data genirq: Move field 'affinity' from irq_data into irq_common_data genirq: Move field 'handler_data' from irq_data into irq_common_data genirq: Move field 'node' from irq_data into irq_common_data irqchip/gic-v3: Use IRQD_FORWARDED_TO_VCPU flag irqchip/gic: Use IRQD_FORWARDED_TO_VCPU flag genirq: Provide IRQD_FORWARDED_TO_VCPU status flag genirq: Simplify irq_data_to_desc() genirq: Remove __irq_set_handler_locked() pinctrl/pistachio: Use irq_set_handler_locked gpio: vf610: Use irq_set_handler_locked powerpc/mpc8xx: Use irq_set_handler_locked() powerpc/ipic: Use irq_set_handler_locked() powerpc/cpm2: Use irq_set_handler_locked() ...
2015-09-16genirq: Remove irq argument from irq flow handlersThomas Gleixner1-2/+2
Most interrupt flow handlers do not use the irq argument. Those few which use it can retrieve the irq number from the irq descriptor. Remove the argument. Search and replace was done with coccinelle and some extra helper scripts around it. Thanks to Julia for her help! Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Jiang Liu <jiang.liu@linux.intel.com>
2015-09-14gpio: mxc: need to check return value of irq_alloc_generic_chipPeng Fan1-2/+10
Need to check return value of irq_alloc_generic_chip, because it may return NULL. 1. Change mxc_gpio_init_gc return type from void to int. 2. Add a new lable out_irqdomain_remove to remove the irq domain when mxc_gpio_init_gc fail. Signed-off-by: Peng Fan <van.freenix@gmail.com> Cc: Alexandre Courbot <gnurou@gmail.com> [Manually rebased] Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-08-13gpio: mxc: fix section mismatch warningDirk Behme1-1/+1
Fix the section mismatch warning WARNING: vmlinux.o(.text+0x2b2788): Section mismatch in reference from the function mxc_gpio_probe() to the function .init.text:mxc_gpio_init_gc() The function mxc_gpio_probe() references the function __init mxc_gpio_init_gc(). This is often because mxc_gpio_probe lacks a __init annotation or the annotation of mxc_gpio_init_gc is wrong. Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com> Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-08-13gpio/mxc: mask gpio interrupts in suspendUlises Brindis1-0/+1
Currently in the FSL platform all GPIO interrupts in a bank are muxed into two GPIO lines to the GPC interrupt controller. In each GPIO bank GPIOs 0-15 are OR'ed into one GPC interrupt controller interrupt and 16-31 are OR'ed into another. With the current code, if any of the 0-15 or 16-31 interrupts are marked as wakeup capable, all interrupts belonging to that sub-bank (either 0-15 or 16-31) will wake up the device. This is because interrupts are only being masked at the interrupt controller and not at the GPIO controller. This patch allows masking of GPIO interrupts at the GPIO controller during suspend if they have not been labeled wakeup capable. This patch uses preexisting IRQCHIP_MASK_ON_SUSPEND flag while initializing the GPIO interrupts to get the desired behavior. Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Alexandre Courbot <gnurou@gmail.com> Cc: linux-gpio@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Ulises Brindis <ubrindis56@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-07-14gpio: Use irq_desc_get_xxx() to avoid redundant lookup of irq_descJiang Liu1-3/+3
Use irq_desc_get_xxx() to avoid redundant lookup of irq_desc while we already have a pointer to corresponding irq_desc. Preparatory patch for the removal of the 'irq' argument from irq flow handlers. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: Alexandre Courbot <gnurou@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-06-23Merge tag 'gpio-v4.2-1' of ↵Linus Torvalds1-2/+3
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull gpio updates from Linus Walleij: "This is the big bulk of GPIO changes queued for the v4.2 kernel series: - a big set of cleanups to the aged sysfs interface from Johan Hovold. To get these in, v4.1-rc3 was merged into the tree as the first patch in that series had to go into stable. This makes the locking much more fine-grained (get rid of the "big GPIO lock(s)" and store states in the GPIO descriptors. - rename gpiod_[g|s]et_array() to gpiod_[g|s]et_array_value() to avoid confusions. - New drivers for: * NXP LPC18xx (currently LPC1850) * NetLogic XLP * Broadcom STB SoC's * Axis ETRAXFS * Zynq Ultrascale+ (subdriver) - ACPI: * make it possible to retrieve GpioInt resources from a GPIO device using acpi_dev_gpio_irq_get() * merge some dependent I2C changes exploiting this. * support the ARM X-Gene GPIO standby driver. - make it possible for the generic GPIO driver to read back the value set registers to reflect current status. - loads of OMAP IRQ handling fixes. - incremental improvements to Kona, max732x, OMAP, MXC, RCAR, PCA953x, STP-XWAY, PCF857x, Crystalcove, TB10x. - janitorial (constification, checkpatch cleanups)" * tag 'gpio-v4.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (71 commits) gpio: Fix checkpatch.pl issues gpio: pcf857x: handle only enabled irqs gpio / ACPI: Return -EPROBE_DEFER if the gpiochip was not found GPIO / ACPI: export acpi_gpiochip_request(free)_interrupts for module use gpio: improve error reporting on own descriptors gpio: promote own request failure to pr_err() gpio: Added support to Zynq Ultrascale+ MPSoC gpio: add ETRAXFS GPIO driver fix documentation after renaming gpiod_set_array to gpiod_set_array_value gpio: Add GPIO support for Broadcom STB SoCs gpio: xgene: add ACPI support for APM X-Gene GPIO standby driver gpio: tb10x: Drop unneeded free_irq() call gpio: crystalcove: set IRQCHIP_SKIP_SET_WAKE for the irqchip gpio: stp-xway: Use the of_property_read_u32 helper gpio: pcf857x: Check for irq_set_irq_wake() failures gpio-stp-xway: Fix enabling the highest bit of the PHY LEDs gpio: Prevent an integer overflow in the pca953x driver gpio: omap: rework omap_gpio_irq_startup to handle current pin state properly gpio: omap: rework omap_gpio_request to touch only gpio specific registers gpio: omap: rework omap_x_irq_shutdown to touch only irqs specific registers ...
2015-06-18gpio: gpio-mxc: Fix race in installing chained IRQ handlerRussell King1-7/+6
Fix a race where a pending interrupt could be received and the handler called before the handler's data has been setup, by converting to irq_set_chained_handler_and_data(). Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Alexandre Courbot <gnurou@gmail.com> Cc: Hans Ulli Kroll <ulli.kroll@googlemail.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Lee Jones <lee.jones@linaro.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/E1Z4z0C-0002SX-Lj@rmk-PC.arm.linux.org.uk Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-05-12gpio: Constify platform_device_idKrzysztof Kozlowski1-1/+1
The platform_device_id is not modified by the driver and core uses it as const. Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-05-11gpio: mxc: read output value from GPIO_DR registerVladimir Zapolskiy1-1/+2
All supported iMX GPIO controllers store configured GPIO output value in GPIO_DR data register, which is represented by GPIO generic reg_set. Provide a BGPIOF_READ_OUTPUT_REG_SET flag to bgpio_init() to allow correct getting of previously set output value. Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-10-20gpio: drop owner assignment from platform_driversWolfram Sang1-1/+0
A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-07-22gpio: remove all usage of gpio_remove retval in driver/gpioabdoulaye berthe1-1/+1
Signed-off-by: abdoulaye berthe <berthe.ab@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-01-02gpio: mxc: Do not hard code return valueSachin Kamat1-1/+1
Silences the following warning: why not propagate 'port->irq' from platform_get_irq() instead of (-22)? Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-08-16gpio/mxc: add chained_irq_enter/exit() to mx2_gpio_irq_handlerUwe Kleine-König1-0/+4
Similar to commit 0e44b6e (gpio/mxc: add chained_irq_enter/exit() to mx3_gpio_irq_handler()) . It doesn't seem to be critical to make the irqs work, but still it is more correct. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-07-23gpio: gpio-mxc: Include "<linux/err.h>"Fabio Estevam1-0/+1
Commit 8cd73e4e (gpio: gpio-mxc: Use devm functions) causes the following build error on imx_v4_v7_defconfig: drivers/gpio/gpio-mxc.c:414:2: error: implicit declaration of function 'IS_ERR' [-Werror=implicit-function-declaration] drivers/gpio/gpio-mxc.c:415:3: error: implicit declaration of function 'PTR_ERR' [-Werror=implicit-function-declaration] Note: imx_v6_v7_defconfig does not give this build error, probably due to some indirect header file inclusion. Reported-by: Olof Johansson <olof@lixom.net> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-07-20gpio: gpio-mxc: Use devm functionsFabio Estevam1-28/+8
By using devm functions we can get a simpler code. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-03-26arm: Move chained_irq_(enter|exit) to a generic fileCatalin Marinas1-1/+1
These functions have been introduced by commit 10a8c383 (irq: introduce entry and exit functions for chained handlers) in asm/mach/irq.h. This patch moves them to linux/irqchip/chained_irq.h so that generic irqchip drivers do not rely on architecture specific header files. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Tested-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Rob Herring <rob.herring@calxeda.com>
2012-11-28gpio: remove use of __devinitBill Pemberton1-2/+2
CONFIG_HOTPLUG is going away as an option so __devinit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Peter Tyser <ptyser@xes-inc.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Kevin Hilman <khilman@ti.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-07gpio/mxc: specify gpio base for device tree probeShawn Guo1-1/+2
Currently, unlike the non-DT probe where the gpio base is specified with pdev->id, the DT probe uses the base dynamically allocated by gpio core, which uses a completely different numbering scheme. This causes two issues to user space applications which access sysfs entry /sys/class/gpio/gpioN. * It breaks the compatibility with user space applications between non-DT and DT kernels. * It's not intuitive and sometimes hard for users to map the Linux gpio number to the actual hardware pin. Use alias to identify the gpio port/bank, and then the gpio base can be specified with port id to solve above issues. If alias is not defined in device tree, the base number dynamically allocated by gpio core will be used. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Tested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>