| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
[ Upstream commit 555317d6100164748f7d09f80142739bd29f0cda ]
Since commit b5daf93b809d1 ("firmware: arm_scmi: Avoid notifier
registration for unsupported events") the call chains leading to the helper
__scmi_event_handler_get_ops expect an ERR_PTR to be returned on failure to
get an handler for the requested event key, while the current helper can
still return a NULL when no handler could be found or created.
Fix by forcing an ERR_PTR return value when the handler reference is NULL.
Fixes: b5daf93b809d1 ("firmware: arm_scmi: Avoid notifier registration for unsupported events")
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Message-Id: <20260305131011.541444-1-cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 879c001afbac3df94160334fe5117c0c83b2cf48 ]
A device_node reference obtained from the device tree is not released
on all error paths in the arm_scpi probe path. Specifically, a node
returned by of_parse_phandle() could be leaked when the probe failed
after the node was acquired. The probe function returns early and
the shmem reference is not released.
Use __free(device_node) scope-based cleanup to automatically release
the reference when the variable goes out of scope.
Fixes: ed7ecb883901 ("firmware: arm_scpi: Add compatibility checks for shmem node")
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Message-Id: <20260121-arm_scpi_2-v2-1-702d7fa84acb@gmail.com>
Signed-off-by: Sudeep Holla <sudeep.holla@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a4e8473b775160f3ce978f621cf8dea2c7250433 ]
According to the FF-A specification (DEN0077, v1.1, §13.7), when
FFA_RXTX_UNMAP is invoked from any instance other than non-secure
physical, the w1 register must be zero (MBZ). If a non-zero value is
supplied in this context, the SPMC must return FFA_INVALID_PARAMETER.
The Arm FF-A driver operates exclusively as a guest or non-secure
physical instance where the partition ID is always zero and is not
invoked from a hypervisor context where w1 carries a VM ID. In this
execution model, the partition ID observed by the driver is always zero,
and passing a VM ID is unnecessary and potentially invalid.
Remove the vm_id parameter from ffa_rxtx_unmap() and ensure that the
SMC call is issued with w1 implicitly zeroed, as required by the
specification. This prevents invalid parameter errors and aligns the
implementation with the defined FF-A ABI behavior.
Fixes: 3bbfe9871005 ("firmware: arm_ffa: Add initial Arm FFA driver support")
Signed-off-by: Yeoreum Yun <yeoreum.yun@arm.com>
Message-Id: <20260304120953.847671-1-yeoreum.yun@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit a4b0bf6a40f3c107c67a24fbc614510ef5719980 upstream.
efi_free_boot_services() frees memory occupied by EFI_BOOT_SERVICES_CODE
and EFI_BOOT_SERVICES_DATA using memblock_free_late().
There are two issue with that: memblock_free_late() should be used for
memory allocated with memblock_alloc() while the memory reserved with
memblock_reserve() should be freed with free_reserved_area().
More acutely, with CONFIG_DEFERRED_STRUCT_PAGE_INIT=y
efi_free_boot_services() is called before deferred initialization of the
memory map is complete.
Benjamin Herrenschmidt reports that this causes a leak of ~140MB of
RAM on EC2 t3a.nano instances which only have 512MB or RAM.
If the freed memory resides in the areas that memory map for them is
still uninitialized, they won't be actually freed because
memblock_free_late() calls memblock_free_pages() and the latter skips
uninitialized pages.
Using free_reserved_area() at this point is also problematic because
__free_page() accesses the buddy of the freed page and that again might
end up in uninitialized part of the memory map.
Delaying the entire efi_free_boot_services() could be problematic
because in addition to freeing boot services memory it updates
efi.memmap without any synchronization and that's undesirable late in
boot when there is concurrency.
More robust approach is to only defer freeing of the EFI boot services
memory.
Split efi_free_boot_services() in two. First efi_unmap_boot_services()
collects ranges that should be freed into an array then
efi_free_boot_services() later frees them after deferred init is complete.
Link: https://lore.kernel.org/all/ec2aaef14783869b3be6e3c253b2dcbf67dbc12a.camel@kernel.crashing.org
Fixes: 916f676f8dc0 ("x86, efi: Retain boot service code until after switching to virtual mode")
Cc: <stable@vger.kernel.org>
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 9fda364cb78c8b9e1abe4029f877300c94655742 ]
ffa_init() maps the Rx/Tx buffers via ffa_rxtx_map() but on the
partition setup failure path it never unmaps them.
Add the missing ffa_rxtx_unmap() call in the error path so that
the Rx/Tx buffers are properly released before freeing the backing
pages.
Signed-off-by: Haoxiang Li <lihaoxiang@isrc.iscas.ac.cn>
Message-Id: <20251210031656.56194-1-lihaoxiang@isrc.iscas.ac.cn>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit eae21beecb95a3b69ee5c38a659f774e171d730e ]
There's a logic inside GHES/CPER to detect if the section_length
is too small, but it doesn't detect if it is too big.
Currently, if the firmware receives an ARM processor CPER record
stating that a section length is big, kernel will blindly trust
section_length, producing a very long dump. For instance, a 67
bytes record with ERR_INFO_NUM set 46198 and section length
set to 854918320 would dump a lot of data going a way past the
firmware memory-mapped area.
Fix it by adding a logic to prevent it to go past the buffer
if ERR_INFO_NUM is too big, making it report instead:
[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 1
[Hardware Error]: event severity: recoverable
[Hardware Error]: Error 0, type: recoverable
[Hardware Error]: section_type: ARM processor error
[Hardware Error]: MIDR: 0xff304b2f8476870a
[Hardware Error]: section length: 854918320, CPER size: 67
[Hardware Error]: section length is too big
[Hardware Error]: firmware-generated error record is incorrect
[Hardware Error]: ERR_INFO_NUM is 46198
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
[ rjw: Subject and changelog tweaks ]
Link: https://patch.msgid.link/41cd9f6b3ace3cdff7a5e864890849e4b1c58b63.1767871950.git.mchehab+huawei@kernel.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 55cc6fe5716f678f06bcb95140882dfa684464ec ]
The current logic at cper_print_fw_err() doesn't check if the
error record length is big enough to handle offset. On a bad firmware,
if the ofset is above the actual record, length -= offset will
underflow, making it dump the entire memory.
The end result can be:
- the logic taking a lot of time dumping large regions of memory;
- data disclosure due to the memory dumps;
- an OOPS, if it tries to dump an unmapped memory region.
Fix it by checking if the section length is too small before doing
a hex dump.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
[ rjw: Subject tweaks ]
Link: https://patch.msgid.link/1752b5ba63a3e2f148ddee813b36c996cc617e86.1767871950.git.mchehab+huawei@kernel.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0862438c90487e79822d5647f854977d50381505 ]
The reserve_unaccepted() function incorrectly calculates the size of the
memblock reservation for the unaccepted memory table. It aligns the
size of the table, but fails to account for cases where the table's
starting physical address (efi.unaccepted) is not page-aligned.
If the table starts at an offset within a page and its end crosses into
a subsequent page that the aligned size does not cover, the end of the
table will not be reserved. This can lead to the table being overwritten
or inaccessible, causing a kernel panic in accept_memory().
This issue was observed when starting Intel TDX VMs with specific memory
sizes (e.g., > 64GB).
Fix this by calculating the end address first (including the unaligned
start) and then aligning it up, ensuring the entire range is covered
by the reservation.
Fixes: 8dbe33956d96 ("efi/unaccepted: Make sure unaccepted table is mapped")
Reported-by: Moritz Sanft <ms@edgeless.systems>
Signed-off-by: Kiryl Shutsemau (Meta) <kas@kernel.org>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit be4d4543f78074fbebd530ba5109d39a2a34e668 ]
The FF-A specification allows NOTIFICATION_INFO_GET to return either a
64-bit (FFA_FN64_SUCCESS) or a 32-bit (FFA_SUCCESS) response, depending on
whether the firmware chooses the SMC64 or SMC32 calling convention.
The driver previously detected the response format by checking ret.a0, but
still interpreted the returned ID lists (x3..x17 or w3..w7) as if they always
followed the 64-bit SMC64 layout. In the SMC32 case, the upper 32 bits of
each argument register are undefined by the calling convention, meaning the
driver could read stale or garbage values when parsing notification IDs.
This resulted in incorrectly decoded partition/VCPU IDs whenever the FF-A
firmware used an SMC32 return path.
Fix the issue by:
- Introducing logic to map list indices to the correct u16 offsets,
depending on whether the response width matches the kernel word size
or is a 32-bit response on a 64-bit kernel.
- Ensuring that the packed ID list is parsed using the proper layout,
avoiding reads from undefined upper halves in the SMC32 case.
With this change, NOTIFICATION_INFO_GET now correctly interprets ID list
entries regardless of the response width, aligning the driver with the FF-A
specification.
Fixes: 3522be48d82b ("firmware: arm_ffa: Implement the NOTIFICATION_INFO_GET interface")
Reported-by: Sourav Mohapatra <sourav.mohapatra@arm.com>
Message-Id: <20251218142001.2457111-1-sudeep.holla@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 10db9f6899dd3a2dfd26efd40afd308891dc44a8 ]
Use the dev_*_ratelimit() macros if the cs_dsp KUnit tests are enabled
in the build, and allow the KUnit tests to disable message output.
Some of the KUnit tests cause a very large number of log messages from
cs_dsp, because the tests perform many different test cases. This could
cause some lines to be dropped from the kernel log. Dropped lines can
prevent the KUnit wrappers from parsing the ktap output in the dmesg log.
The KUnit builds of cs_dsp export three bools that the KUnit tests can
use to entirely disable log output of err, warn and info messages. Some
tests have been updated to use this, replacing the previous fudge of a
usleep() in the exit handler of each test. We don't necessarily want to
disable all log messages if they aren't expected to be excessive,
so the rate-limiting allows leaving some logging enabled.
The rate-limited macros are not used in normal builds because it is not
appropriate to rate-limit every message. That could cause important
messages to be dropped, and there wouldn't be such a high rate of
messages in normal operation.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reported-by: Mark Brown <broonie@kernel.org>
Closes: https://lore.kernel.org/linux-sound/af393f08-facb-4c44-a054-1f61254803ec@opensource.cirrus.com/T/#t
Fixes: cd8c058499b6 ("firmware: cs_dsp: Add KUnit testing of bin error cases")
Link: https://patch.msgid.link/20260130171256.863152-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 78cfd833bc04c0398ca4cfc64704350aebe4d4c2 ]
cs_dsp_debugfs_wmfw_read() and cs_dsp_debugfs_bin_read() were identical
except for which struct member they printed. Move all this duplicated
code into a common function cs_dsp_debugfs_string_read().
The check for dsp->booted has been removed because this is redundant.
The two strings are set when the DSP is booted and cleared when the
DSP is powered-down.
Access to the string char * must be protected by the pwr_lock mutex. The
string is passed into cs_dsp_debugfs_string_read() as a pointer to the
char * so that the mutex lock can also be factored out into
cs_dsp_debugfs_string_read().
wmfw_file_name and bin_file_name members of struct cs_dsp have been
changed to const char *. It makes for a better API to pass a const
pointer into cs_dsp_debugfs_string_read().
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20251120130640.1169780-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Stable-dep-of: 10db9f6899dd ("firmware: cs_dsp: rate-limit log messages in KUnit builds")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit d7f1b4bdc7108be1b178e1617b5f45c8918e88d7 upstream.
The return value calculation was incorrect: `return len - buf_size;`
Initially `len = buf_size`, then `len` decreases with each operation.
This results in a negative return value on success.
Fix by returning `buf_size - len` which correctly calculates the actual
number of bytes written.
Fixes: a976d790f494 ("efi/cper: Add a new helper function to print bitmasks")
Signed-off-by: Morduan Zang <zhangdandan@uniontech.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ff3f9913bc0749364fbfd86ea62ba2d31c6136c8 upstream.
mu_resource_id is referenced in imx_scu_irq_get_status() and
imx_scu_irq_group_enable() which could be used by other modules, so
need to set correct value before using imx_sc_irq_ipc_handle in
SCU API call.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Fixes: 81fb53feb66a ("firmware: imx: scu-irq: Init workqueue before request mbox channel")
Cc: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 85f96cbbbc67b59652b2c1ec394b8ddc0ddf1b0b upstream.
Add mutex lock to stratix10_svc_allocate_memory and
stratix10_svc_free_memory for thread safety. This prevents race
conditions and ensures proper synchronization during memory operations.
This is required for parallel communication with the Stratix10 service
channel.
Fixes: 7ca5ce896524f ("firmware: add Intel Stratix10 service layer driver")
Cc: stable@vger.kernel.org
Signed-off-by: Mahesh Rao <mahesh.rao@altera.com>
Reviewed-by: Matthew Gerlach <matthew.gerlach@altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 40374d308e4e456048d83991e937f13fc8bda8bf upstream.
Initialize the cpus_allowed_lock struct member of efi_mm.
Cc: stable@vger.kernel.org
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 81fb53feb66a3aefbf6fcab73bb8d06f5b0c54ad ]
With mailbox channel requested, there is possibility that interrupts may
come in, so need to make sure the workqueue is initialized before
the queue is scheduled by mailbox rx callback.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 96b010536ee020e716d28d9b359a4bcd18800aeb ]
Up to UEFI spec 2.9, the type byte of CPER struct for ARM processor
was defined simply as:
Type at byte offset 4:
- Cache error
- TLB Error
- Bus Error
- Micro-architectural Error
All other values are reserved
Yet, there was no information about how this would be encoded.
Spec 2.9A errata corrected it by defining:
- Bit 1 - Cache Error
- Bit 2 - TLB Error
- Bit 3 - Bus Error
- Bit 4 - Micro-architectural Error
All other values are reserved
That actually aligns with the values already defined on older
versions at N.2.4.1. Generic Processor Error Section.
Spec 2.10 also preserve the same encoding as 2.9A.
Adjust CPER and GHES handling code for both generic and ARM
processors to properly handle UEFI 2.9A and 2.10 encoding.
Link: https://uefi.org/specs/UEFI/2.10/Apx_N_Common_Platform_Error_Record.html#arm-processor-error-information
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8ad2c72e21efb3dc76c5b14089fa7984cdd87898 ]
Compiling with W=1 with werror enabled produces an error:
drivers/firmware/efi/cper-arm.c: In function ‘cper_print_proc_arm’:
drivers/firmware/efi/cper-arm.c:298:64: error: ‘snprintf’ output may be truncated before the last format character [-Werror=format-truncation=]
298 | snprintf(infopfx, sizeof(infopfx), "%s ", newpfx);
| ^
drivers/firmware/efi/cper-arm.c:298:25: note: ‘snprintf’ output between 2 and 65 bytes into a destination of size 64
298 | snprintf(infopfx, sizeof(infopfx), "%s ", newpfx);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
As the logic there adds an space at the end of infopx buffer.
Add an extra space to avoid such warning.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a976d790f49499ccaa0f991788ad8ebf92e7fd5c ]
Add a helper function to print a string with names associated
to each bit field.
A typical example is:
const char * const bits[] = {
"bit 3 name",
"bit 4 name",
"bit 5 name",
};
char str[120];
unsigned int bitmask = BIT(3) | BIT(5);
#define MASK GENMASK(5,3)
cper_bits_to_str(str, sizeof(str), FIELD_GET(MASK, bitmask),
bits, ARRAY_SIZE(bits));
The above code fills string "str" with "bit 3 name|bit 5 name".
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 377441d53a2df61b105e823b335010cd4f1a6e56 ]
Fix this warning that was generated from "make htmldocs":
WARNING: drivers/firmware/stratix10-svc.c:58 struct member 'intel_svc_fcs'
not described in 'stratix10_svc'
Fixes: e6281c26674e ("firmware: stratix10-svc: Add support for FCS")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/linux-next/20251106145941.37920e97@canb.auug.org.au/
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Link: https://patch.msgid.link/20251114185815.358423-1-dinguyen@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 84361123413efc84b06f3441c6c827b95d902732 ]
When transitioning from 5-level to 4-level paging, the existing code
incorrectly accesses page table entries by directly dereferencing CR3 and
applying PAGE_MASK. This approach has several issues:
- __native_read_cr3() returns the raw CR3 register value, which on x86_64
includes not just the physical address but also flags Bits above the
physical address width of the system (i.e. above __PHYSICAL_MASK_SHIFT) are
also not masked.
- The pgd value is masked by PAGE_SIZE which doesn't take into account the
higher bits such as _PAGE_BIT_NOPTISHADOW.
Replace this with proper accessor functions:
- native_read_cr3_pa(): Uses CR3_ADDR_MASK to additionally mask metadata out
of CR3 (like SME or LAM bits). All remaining bits are real address bits or
reserved and must be 0.
- mask pgd value with PTE_PFN_MASK instead of PAGE_MASK, accounting for flags
above bit 51 (_PAGE_BIT_NOPTISHADOW in particular). Bits below 51, but above
the max physical address are reserved and must be 0.
Fixes: cb1c9e02b0c1 ("x86/efistub: Perform 4/5 level paging switch from the stub")
Reported-by: Michael van der Westhuizen <rmikey@meta.com>
Reported-by: Tobias Fleig <tfleig@meta.com>
Co-developed-by: Kiryl Shutsemau <kas@kernel.org>
Signed-off-by: Kiryl Shutsemau <kas@kernel.org>
Signed-off-by: Usama Arif <usamaarif642@gmail.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://patch.msgid.link/20251103141002.2280812-3-usamaarif642@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 999e9bc953e321651d69556fdd5dfd178f96f128 ]
Prevent calling ti_sci_cmd_set_io_isolation() on firmware
that does not support the IO_ISOLATION capability. Add the
MSG_FLAG_CAPS_IO_ISOLATION capability flag and check it before
attempting to set IO isolation during suspend/resume operations.
Without this check, systems with older firmware may experience
undefined behavior or errors when entering/exiting suspend states.
Fixes: ec24643bdd62 ("firmware: ti_sci: Add system suspend and resume call")
Signed-off-by: Thomas Richard (TI.com) <thomas.richard@bootlin.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Link: https://patch.msgid.link/20251031-ti-sci-io-isolation-v2-1-60d826b65949@bootlin.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ee67247843a2b62d1473cfa4df300e69b5190ccf ]
imx_scu_enable_general_irq_channel() calls of_parse_phandle_with_args(),
but does not release the OF node reference. Add a of_node_put() call
to release the reference.
Fixes: 851826c7566e ("firmware: imx: enable imx scu general irq function")
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
Fix the incorrect usage of platform_set_drvdata and dev_set_drvdata. They
both are of the same data and overrides each other. This resulted in the
rmmod of the svc driver to fail and throw a kernel panic for kthread_stop
and fifo free.
Fixes: b5dc75c915cd ("firmware: stratix10-svc: extend svc to support new RSU features")
Cc: stable@vger.kernel.org # 6.6+
Signed-off-by: Ang Tien Sung <tiensung.ang@altera.com>
Signed-off-by: Khairul Anuar Romli <khairul.anuar.romli@altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes
Arm SCMI fixes for v6.18
This series contains a set of small, focused fixes that address
robustness and lifecycle issues in the Arm SCMI core and debug support,
ensuring safer handling of debug initialization failures, correct flag
management in raw mode, and consistent inflight counter tracking.
Brief summary:
- Fix raw xfer flag clearing
- Skip RAW debug initialization on failure
- Make inflight counter helpers null-safe, preventing crashes if debug
initialization fails
- Account for failed debug initialization globally
There is no functional change for standard SCMI operation, but these
fixes improve stability in debug and raw modes, particularly in error
paths.
* tag 'scmi-fixes-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_scmi: Fix premature SCMI_XFER_FLAG_IS_RAW clearing in raw mode
firmware: arm_scmi: Skip RAW initialization on failure
include: trace: Fix inflight count helper on failed initialization
firmware: arm_scmi: Account for failed debug initialization
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The SCMI_XFER_FLAG_IS_RAW flag was being cleared prematurely in
scmi_xfer_raw_put() before the transfer completion was properly
acknowledged by the raw message handlers.
Move the clearing of SCMI_XFER_FLAG_IS_RAW and SCMI_XFER_FLAG_CHAN_SET
from scmi_xfer_raw_put() to __scmi_xfer_put() to ensure the flags remain
set throughout the entire raw message processing pipeline until the
transfer is returned to the free pool.
Fixes: 3095a3e25d8f ("firmware: arm_scmi: Add xfer helpers to provide raw access")
Suggested-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Artem Shimko <a.shimko.dev@gmail.com>
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Message-Id: <20251008091057.1969260-1-a.shimko.dev@gmail.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Avoid attempting to initialize RAW mode when the debug subsystem itself
has failed to initialize, since doing so is pointless and emits
misleading error messages.
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Message-Id: <20251014115346.2391418-3-cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Add a check to the scmi_inflight_count() helper to handle the case
when the SCMI debug subsystem fails to initialize.
Fixes: f8e656382b4a ("include: trace: Add tracepoint support for inflight xfer count")
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Message-Id: <20251014115346.2391418-2-cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
When the SCMI debug subsystem fails to initialize, the related debug root
will be missing, and the underlying descriptor will be NULL.
Handle this fault condition in the SCMI debug helpers that maintain
metrics counters.
Fixes: 0b3d48c4726e ("firmware: arm_scmi: Track basic SCMI communication debug metrics")
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Message-Id: <20251014115346.2391418-1-cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
FF-A v1.2 introduced 16 byte IMPLEMENTATION DEFINED value in the endpoint
memory access descriptor to allow any sender could to specify an its any
custom value for each receiver. Also this value must be specified by the
receiver when retrieving the memory region. The sender must ensure it
informs the receiver of this value via an IMPLEMENTATION DEFINED mechanism
such as a partition message.
So the FF-A driver can use the message interfaces to communicate the value
and set the same in the ffa_mem_region_attributes structures when using
the memory interfaces.
The driver ensure that the size of the endpoint memory access descriptors
is set correctly based on the FF-A version.
Fixes: 9fac08d9d985 ("firmware: arm_ffa: Upgrade FF-A version to v1.2 in the driver")
Reported-by: Lixiang Mao <liximao@qti.qualcomm.com>
Tested-by: Lixiang Mao <liximao@qti.qualcomm.com>
Message-Id: <20250923150927.1218364-1-sudeep.holla@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI updates from Ard Biesheuvel:
- Document what OVMF stands for (Open Virtual Machine Firmware)
- Clear NX restrictions also from 'more reliable' type memory when
using the DXE service API
* tag 'efi-next-for-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi/x86: Memory protection on EfiGcdMemoryTypeMoreReliable
efi: Explain OVMF acronym in OVMF_DEBUG_LOG help text
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- "ida: Remove the ida_simple_xxx() API" from Christophe Jaillet
completes the removal of this legacy IDR API
- "panic: introduce panic status function family" from Jinchao Wang
provides a number of cleanups to the panic code and its various
helpers, which were rather ad-hoc and scattered all over the place
- "tools/delaytop: implement real-time keyboard interaction support"
from Fan Yu adds a few nice user-facing usability changes to the
delaytop monitoring tool
- "efi: Fix EFI boot with kexec handover (KHO)" from Evangelos
Petrongonas fixes a panic which was happening with the combination of
EFI and KHO
- "Squashfs: performance improvement and a sanity check" from Phillip
Lougher teaches squashfs's lseek() about SEEK_DATA/SEEK_HOLE. A mere
150x speedup was measured for a well-chosen microbenchmark
- plus another 50-odd singleton patches all over the place
* tag 'mm-nonmm-stable-2025-10-02-15-29' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (75 commits)
Squashfs: reject negative file sizes in squashfs_read_inode()
kallsyms: use kmalloc_array() instead of kmalloc()
MAINTAINERS: update Sibi Sankar's email address
Squashfs: add SEEK_DATA/SEEK_HOLE support
Squashfs: add additional inode sanity checking
lib/genalloc: fix device leak in of_gen_pool_get()
panic: remove CONFIG_PANIC_ON_OOPS_VALUE
ocfs2: fix double free in user_cluster_connect()
checkpatch: suppress strscpy warnings for userspace tools
cramfs: fix incorrect physical page address calculation
kernel: prevent prctl(PR_SET_PDEATHSIG) from racing with parent process exit
Squashfs: fix uninit-value in squashfs_get_parent
kho: only fill kimage if KHO is finalized
ocfs2: avoid extra calls to strlen() after ocfs2_sprintf_system_inode_name()
kernel/sys.c: fix the racy usage of task_lock(tsk->group_leader) in sys_prlimit64() paths
sched/task.h: fix the wrong comment on task_lock() nesting with tasklist_lock
coccinelle: platform_no_drv_owner: handle also built-in drivers
coccinelle: of_table: handle SPI device ID tables
lib/decompress: use designated initializers for struct compress_format
efi: support booting with kexec handover (KHO)
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"Lots of platform specific updates for Qualcomm SoCs, including a new
TEE subsystem driver for the Qualcomm QTEE firmware interface.
Added support for the Apple A11 SoC in drivers that are shared with
the M1/M2 series, among more updates for those.
Smaller platform specific driver updates for Renesas, ASpeed,
Broadcom, Nvidia, Mediatek, Amlogic, TI, Allwinner, and Freescale
SoCs.
Driver updates in the cache controller, memory controller and reset
controller subsystems.
SCMI firmware updates to add more features and improve robustness.
This includes support for having multiple SCMI providers in a single
system.
TEE subsystem support for protected DMA-bufs, allowing hardware to
access memory areas that managed by the kernel but remain inaccessible
from the CPU in EL1/EL0"
* tag 'soc-drivers-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (139 commits)
soc/fsl/qbman: Use for_each_online_cpu() instead of for_each_cpu()
soc: fsl: qe: Drop legacy-of-mm-gpiochip.h header from GPIO driver
soc: fsl: qe: Change GPIO driver to a proper platform driver
tee: fix register_shm_helper()
pmdomain: apple: Add "apple,t8103-pmgr-pwrstate"
dt-bindings: spmi: Add Apple A11 and T2 compatible
serial: qcom-geni: Load UART qup Firmware from linux side
spi: geni-qcom: Load spi qup Firmware from linux side
i2c: qcom-geni: Load i2c qup Firmware from linux side
soc: qcom: geni-se: Add support to load QUP SE Firmware via Linux subsystem
soc: qcom: geni-se: Cleanup register defines and update copyright
dt-bindings: qcom: se-common: Add QUP Peripheral-specific properties for I2C, SPI, and SERIAL bus
Documentation: tee: Add Qualcomm TEE driver
tee: qcom: enable TEE_IOC_SHM_ALLOC ioctl
tee: qcom: add primordial object
tee: add Qualcomm TEE driver
tee: increase TEE_MAX_ARG_SIZE to 4096
tee: add TEE_IOCTL_PARAM_ATTR_TYPE_OBJREF
tee: add TEE_IOCTL_PARAM_ATTR_TYPE_UBUF
tee: add close_context to TEE driver operation
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 SEV and apic updates from Borislav Petkov:
- Add functionality to provide runtime firmware updates for the non-x86
parts of an AMD platform like the security processor (ASP) firmware,
modules etc, for example. The intent being that these updates are
interim, live fixups before a proper BIOS update can be attempted
- Add guest support for AMD's Secure AVIC feature which gives encrypted
guests the needed protection against a malicious hypervisor
generating unexpected interrupts and injecting them into such guest,
thus interfering with its operation in an unexpected and negative
manner.
The advantage of this scheme is that the guest determines which
interrupts and when to accept them vs leaving that to the benevolence
(or not) of the hypervisor
- Strictly separate the startup code from the rest of the kernel where
former is executed from the initial 1:1 mapping of memory.
The problem was that the toolchain-generated version of the code was
being executed from a different mapping of memory than what was
"assumed" during code generation, needing an ever-growing pile of
fixups for absolute memory references which are invalid in the early,
1:1 memory mapping during boot.
The major advantage of this is that there's no need to check the 1:1
mapping portion of the code for absolute relocations anymore and get
rid of the RIP_REL_REF() macro sprinkling all over the place.
For more info, see Ard's very detailed writeup on this [1]
- The usual cleanups and fixes
Link: https://lore.kernel.org/r/CAMj1kXEzKEuePEiHB%2BHxvfQbFz0sTiHdn4B%2B%2BzVBJ2mhkPkQ4Q@mail.gmail.com [1]
* tag 'x86_apic_for_v6.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (49 commits)
x86/boot: Drop erroneous __init annotation from early_set_pages_state()
crypto: ccp - Add AMD Seamless Firmware Servicing (SFS) driver
crypto: ccp - Add new HV-Fixed page allocation/free API
x86/sev: Add new dump_rmp parameter to snp_leak_pages() API
x86/startup/sev: Document the CPUID flow in the boot #VC handler
objtool: Ignore __pi___cfi_ prefixed symbols
x86/sev: Zap snp_abort()
x86/apic/savic: Do not use snp_abort()
x86/boot: Get rid of the .head.text section
x86/boot: Move startup code out of __head section
efistub/x86: Remap inittext read-execute when needed
x86/boot: Create a confined code area for startup code
x86/kbuild: Incorporate boot/startup/ via Kbuild makefile
x86/boot: Revert "Reject absolute references in .head.text"
x86/boot: Check startup code for absence of absolute relocations
objtool: Add action to check for absence of absolute relocations
x86/sev: Export startup routines for later use
x86/sev: Move __sev_[get|put]_ghcb() into separate noinstr object
x86/sev: Provide PIC aliases for SEV related data objects
x86/boot: Provide PIC aliases for 5-level paging related constants
...
|
|
Check for needed memory protection changes on EFI DXE GCD memory space
descriptors with type EfiGcdMemoryTypeMoreReliable in addition to
EfiGcdMemoryTypeSystemMemory.
This fixes a fault on entry into the decompressed kernel from the
EFI stub that occurs when the memory allocated for the decompressed
kernel is more reliable memory, has NX/XP set, and the kernel needs
to use the EFI DXE protocol to adjust memory protections.
The memory descriptors returned by the DXE protocol
GetMemorySpaceDescriptor() service use a different GCD memory type
to distinguish more reliable memory ranges from their conventional
counterparts. This is in contrast to the EFI memory descriptors
returned by the EFI GetMemoryMap() service which use the
EFI_MEMORY_MORE_RELIABLE memory attributes flag to identify
EFI_CONVENTIONAL_MEMORY type regions that have this additional
property.
Signed-off-by: Lenny Szubowicz <lszubowi@redhat.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"There are a few minor code fixes for tegra firmware, i.MX firmware
and the eyeq reset controller, and a MAINTAINERS update as Alyssa
Rosenzweig moves on to non-kernel projects.
The other changes are all for devicetree files:
- Multiple Marvell Armada SoCs need changes to fix PCIe, audio and
SATA
- A socfpga board fails to probe the ethernet phy
- The two temperature sensors on i.MX8MP are swapped
- Allwinner devicetree files cause build-time warnings
- Two Rockchip based boards need corrections for headphone detection
and SPI flash"
* tag 'soc-fixes-6.17-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
MAINTAINERS: remove Alyssa Rosenzweig
firmware: tegra: Do not warn on missing memory-region property
arm64: dts: marvell: cn9132-clearfog: fix multi-lane pci x2 and x4 ports
arm64: dts: marvell: cn9132-clearfog: disable eMMC high-speed modes
arm64: dts: marvell: cn913x-solidrun: fix sata ports status
ARM: dts: kirkwood: Fix sound DAI cells for OpenRD clients
arm64: dts: imx8mp: Correct thermal sensor index
ARM: imx: Kconfig: Adjust select after renamed config option
firmware: imx: Add stub functions for SCMI CPU API
firmware: imx: Add stub functions for SCMI LMM API
firmware: imx: Add stub functions for SCMI MISC API
riscv: dts: allwinner: rename devterm i2c-gpio node to comply with binding
arm64: dts: rockchip: Fix the headphone detection on the orangepi 5
arm64: dts: rockchip: Add vcc supply for SPI Flash on NanoPC-T6
ARM: dts: socfpga: sodia: Fix mdio bus probe and PHY address
reset: eyeq: fix OF node leak
ARM64: dts: mcbin: fix SATA ports on Macchiatobin
ARM: dts: armada-370-db: Fix stereo audio input routing on Armada 370
ARM: dts: allwinner: Minor whitespace cleanup
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/drivers
TI SoC driver updates for v6.18
- ti_sci: Add support for abort handling of entry to Low Power Mode
- k3-socinfo: Add decode for AM62L SR1.1 silicon revision
- pruss: Replace usage of %pK in printk with safer %p formatting
* tag 'ti-driver-soc-for-v6.18' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux:
soc: ti: k3-socinfo: Add information for AM62L SR1.1
firmware: ti_sci: Enable abort handling of entry to LPM
soc: ti: pruss: don't use %pK through printk
Link: https://lore.kernel.org/r/20250916175441.iehltsk2377rg5c6@alike
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into soc/drivers
Amlogic Drivers changes for v6.18:
- device leak at probe in meson_sm
- fix compile-test default for meson_sm
* tag 'amlogic-drivers-for-v6.18' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux:
firmware: firmware: meson-sm: fix compile-test default
firmware: meson_sm: fix device leak at probe
Link: https://lore.kernel.org/r/003cb467-531d-4a8d-a97f-19d59154132f@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
More Qualcomm device driver updates for v6.18
Introduce support for loading firmware into the QUP serial engines from
Linux, which allows deferring selection of which protocol (uart, i2c,
spi, etc) a given SE should have until the OS loads.
Also introduce the "object invoke" interface in the SCM driver, to
provide interface to the Qualcomm TEE driver.
* tag 'qcom-drivers-for-6.18-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
serial: qcom-geni: Load UART qup Firmware from linux side
spi: geni-qcom: Load spi qup Firmware from linux side
i2c: qcom-geni: Load i2c qup Firmware from linux side
soc: qcom: geni-se: Add support to load QUP SE Firmware via Linux subsystem
soc: qcom: geni-se: Cleanup register defines and update copyright
dt-bindings: qcom: se-common: Add QUP Peripheral-specific properties for I2C, SPI, and SERIAL bus
firmware: qcom: scm: add support for object invocation
firmware: qcom: tzmem: export shm_bridge create/delete
Link: https://lore.kernel.org/r/20250921020225.595403-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Conflicts:
arch/x86/include/asm/sev.h
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The IPC shared memory can reside in system memory or SRAM. In the latter
case the memory-region property is expected not to be present, so do not
warn about it.
Reported-by: Jonathan Hunter <jonathanh@nvidia.com>
Fixes: dbe4efea38d0 ("firmware: tegra: bpmp: Use of_reserved_mem_region_to_resource() for "memory-region"")
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into soc/drivers
Arm SCMI updates/fixes for v6.18
These SCMI changes bring a mix of improvements, fixes, and cleanups:
1. Device Tree bindings - allow multiple SCMI instances by suffixing
node names (Nikunj Kela).
2. Code hardening - constify both scmi_{transport,voltage_proto}_ops
so they reside in read-only memory (Christophe JAILLET).
3. VirtIO transport initialization - set DRIVER_OK before SCMI probing
to prevent potential stalls; while recent rework removes the practical
risk, this ensures correctness (Junnan Wu).
4. Quirk handling - fix a critical bug by preventing writes to string
constants, avoiding faults in read-only memory (Johan Hovold).
5. i.MX SCMI MISC protocol - extend support to discover board info,
retrieve configuration and build data, and document the new
MISC_BOARD_INFO command; all handled gracefully if unsupported (Peng Fan).
6. Logging cleanup - simplify device tree node name logging by using
the %pOF format to print full paths (Krzysztof Kozlowski).
* tag 'scmi-updates-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_scmi: Simplify printks with pOF format
firmware: arm_scmi: imx: Discover MISC board info from the system manager
firmware: arm_scmi: imx: Support retrieving MISC protocol configuration info
firmware: arm_scmi: imx: Discover MISC build info from the system manager
firmware: arm_scmi: imx: Add documentation for MISC_BOARD_INFO
firmware: arm_scmi: quirk: Prevent writes to string constants
firmware: arm_scmi: Fix function name typo in scmi_perf_proto_ops struct
firmware: arm_scmi: Mark VirtIO ready before registering scmi_virtio_driver
firmware: arm_scmi: Constify struct scmi_transport_ops
firmware: arm_scmi: Constify struct scmi_voltage_proto_ops
dt-bindings: firmware: arm,scmi: Allow multiple instances
Link: https://lore.kernel.org/r/20250915101341.2987516-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/drivers
Samsung SoC drivers for v6.18
1. Google GS101:
Enable CPU Idle, which needs programming C2 idle hints
via ACPM firmware (Alive Clock and Power Manager). The patch
introducing this depends on 'local-timer-stop' Devicetree property,
which was merged in v6.17.
Fix handling error codes in ACPM firmware driver when talking to
PMIC.
2. Exynos2200: Add dedicated compatible for serial engines (USI).
* tag 'samsung-drivers-6.18' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
firmware: exynos-acpm: fix PMIC returned errno
dt-bindings: soc: samsung: usi: add samsung,exynos2200-usi compatible
soc: samsung: exynos-pmu: Enable CPU Idle for gs101
Link: https://lore.kernel.org/r/20250912135448.203678-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
Qualcomm driver updates for v6.18
Allowlist the uefisec application, to provide UEFI variable access on
Dell Inspiron 7441 and Latitude 7455, the Hamoa EVK, and the Lenovo
Thinkbook 16.
Disable tzmem on the SC7180 platform, as this causes problems with
rmtfs.
Clean up unused, lingering, parameters in the MDT loader API.
Unconditinally clear TCS trigger bit, to avoid false completion IRQs in
the RPMh/RSC driver. Fix endianess issue in SMEM driver.
Add pd-mapper support for SM8750.
* tag 'qcom-drivers-for-6.18' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
firmware: qcom: tzmem: disable sc7180 platform
soc: qcom: use devm_kcalloc() for array space allocation
dt-bindings: firmware: qcom,scm: Add MSM8937
firmware: qcom: scm: Allow QSEECOM on Dell Inspiron 7441 / Latitude 7455
firmware: qcom: scm: Allow QSEECOM on Lenovo Thinkbook 16
soc: qcom: rpmh-rsc: Unconditionally clear _TRIGGER bit for TCS
soc: qcom: pd-mapper: Add SM8750 compatible
soc: qcom: icc-bwmon: Fix handling dev_pm_opp_find_bw_*() errors
soc: remove unneeded 'fast_io' parameter in regmap_config
soc: qcom: smem: Fix endian-unaware access of num_entries
dt-bindings: soc: qcom,rpmh-rsc: Remove double colon from description
dt-bindings: sram: qcom,imem: Document IPQ5424 compatible
firmware: qcom: scm: Allow QSEECOM on HAMOA-IOT-EVK
soc: qcom: mdt_loader: Remove unused parameter
soc: qcom: mdt_loader: Remove pas id parameter
soc: qcom: mdt_loader: Remove unused parameter
firmware: qcom: scm: preserve assign_mem() error return value
Link: https://lore.kernel.org/r/20250911215017.3020481-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
into soc/drivers
This pull request contains Broadcom SoC drivers updates for 6.18:
- Andrea adds the missing MIPI DSI clock defines for the RP1 and then
continues to implement the remaining clocks for the RP1 chip (ADC,
I2S, Audio in/out, DMA, MIPI, PWM, SDIO, UART, encoder)
- Akhilesh fixes a spelling typo in the bcm47xx_sprom driver
- Brian converts the RP1 clock driver to use the new determine_rate()
API
* tag 'arm-soc/for-6.18/drivers' of https://github.com/Broadcom/stblinux:
clk: rp1: convert from round_rate() to determine_rate()
drivers: firmware: bcm47xx_sprom: fix spelling
clk: rp1: Implement remaining clock tree
dt-bindings: clock: rp1: Add missing MIPI DSI defines
Link: https://lore.kernel.org/r/20250910171910.666401-4-florian.fainelli@broadcom.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
'20250911-qcom-tee-using-tee-ss-without-mem-obj-v12-2-17f07a942b8d@oss.qualcomm.com' into drivers-for-6.18
Merge the addition of support for object invocation into the SCM driver
though a topic branch, to enable sharing this with TEE subsystem.
|
|
Qualcomm TEE (QTEE) hosts Trusted Applications (TAs) and services in
the secure world, accessed via objects. A QTEE client can invoke these
objects to request services. Similarly, QTEE can request services from
the nonsecure world using objects exported to the secure world.
Add low-level primitives to facilitate the invocation of objects hosted
in QTEE, as well as those hosted in the nonsecure world.
If support for object invocation is available, the qcom_scm allocates
a dedicated child platform device. The driver for this device communicates
with QTEE using low-level primitives.
Tested-by: Neil Armstrong <neil.armstrong@linaro.org>
Tested-by: Harshal Dev <quic_hdev@quicinc.com>
Signed-off-by: Amirreza Zarrabi <amirreza.zarrabi@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250911-qcom-tee-using-tee-ss-without-mem-obj-v12-2-17f07a942b8d@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Anyone with access to contiguous physical memory should be able to
share memory with QTEE using shm_bridge.
Tested-by: Neil Armstrong <neil.armstrong@linaro.org>
Tested-by: Harshal Dev <quic_hdev@quicinc.com>
Reviewed-by: Kuldeep Singh <quic_kuldsing@quicinc.com>
Signed-off-by: Amirreza Zarrabi <amirreza.zarrabi@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250911-qcom-tee-using-tee-ss-without-mem-obj-v12-1-17f07a942b8d@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
When KHO (Kexec HandOver) is enabled, it sets up scratch memory regions
early during device tree scanning. After kexec, the new kernel
exclusively uses this region for memory allocations during boot up to the
initialization of the page allocator
However, when booting with EFI, EFI's reserve_regions() uses
memblock_remove(0, PHYS_ADDR_MAX) to clear all memory regions before
rebuilding them from EFI data. This destroys KHO scratch regions and
their flags, thus causing a kernel panic, as there are no scratch memory
regions.
Instead of wholesale removal, iterate through memory regions and only
remove non-KHO ones. This preserves KHO scratch regions, which are good
known memory, while still allowing EFI to rebuild its memory map.
Link: https://lkml.kernel.org/r/b34da9fd50c89644cd4204136cfa6f5533445c56.1755721529.git.epetron@amazon.de
Signed-off-by: Evangelos Petrongonas <epetron@amazon.de>
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Acked-by: Pratyush Yadav <pratyush@kernel.org>
Cc: Alexander Graf <graf@amazon.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: Changyuan Lyu <changyuanl@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Print full device node name with %pOF format, so the code will be a bit
simpler.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Message-Id: <20250912092423.162497-2-krzysztof.kozlowski@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
