summaryrefslogtreecommitdiff
path: root/drivers/firmware
AgeCommit message (Collapse)AuthorFilesLines
2025-09-04firmware: qcom: scm: request the waitqueue irq *after* initializing SCMBartosz Golaszewski1-22/+14
commit 7ab36b51c6bee56e1a1939063dd10d602fe49d13 upstream. There's a subtle race in the SCM driver: we assign the __scm pointer before requesting the waitqueue interrupt. Assigning __scm marks the SCM API as ready to accept calls. It's possible that a user makes a call right after we set __scm and the firmware raises an interrupt before the driver's ready to service it. Move the __scm assignment after we request the interrupt. This has the added benefit of allowing us to drop the goto label. Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Link: https://lore.kernel.org/r/20250630-qcom-scm-race-v2-4-fa3851c98611@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-09-04firmware: qcom: scm: initialize tzmem before marking SCM as availableBartosz Golaszewski1-27/+26
commit 87be3e7a2d0030cda6314d2ec96b37991f636ccd upstream. Now that qcom_scm_shm_bridge_enable() uses the struct device passed to it as argument to make the QCOM_SCM_MP_SHM_BRIDGE_ENABLE SCM call, we can move the TZMem initialization before the assignment of the __scm pointer in the SCM driver (which marks SCM as ready to users) thus fixing the potential race between consumer calls and the memory pool initialization. Reported-by: Johan Hovold <johan+linaro@kernel.org> Closes: https://lore.kernel.org/all/20250120151000.13870-1-johan+linaro@kernel.org/ Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Link: https://lore.kernel.org/r/20250630-qcom-scm-race-v2-3-fa3851c98611@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-09-04firmware: qcom: scm: take struct device as argument in SHM bridge enableBartosz Golaszewski3-4/+12
commit dc3f4e75c54c19bad9a70419afae00ce6baf3ebf upstream. qcom_scm_shm_bridge_enable() is used early in the SCM initialization routine. It makes an SCM call and so expects the internal __scm pointer in the SCM driver to be assigned. For this reason the tzmem memory pool is allocated *after* this pointer is assigned. However, this can lead to a crash if another consumer of the SCM API makes a call using the memory pool between the assignment of the __scm pointer and the initialization of the tzmem memory pool. As qcom_scm_shm_bridge_enable() is a special case, not meant to be called by ordinary users, pull it into the local SCM header. Make it take struct device as argument. This is the device that will be used to make the SCM call as opposed to the global __scm pointer. This will allow us to move the tzmem initialization *before* the __scm assignment in the core SCM driver. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Link: https://lore.kernel.org/r/20250630-qcom-scm-race-v2-2-fa3851c98611@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-09-04firmware: qcom: scm: remove unused arguments from SHM bridge routinesBartosz Golaszewski2-6/+6
commit 23972da96e1eee7f10c8ef641d56202ab9af8ba7 upstream. qcom_scm_shm_bridge_create() and qcom_scm_shm_bridge_delete() take struct device as argument but don't use it. Remove it from these functions' prototypes. Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Link: https://lore.kernel.org/r/20250630-qcom-scm-race-v2-1-fa3851c98611@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-09-04efi: stmm: Fix incorrect buffer allocation methodJan Kiszka1-9/+12
[ Upstream commit c5e81e672699e0c5557b2b755cc8f7a69aa92bff ] The communication buffer allocated by setup_mm_hdr() is later on passed to tee_shm_register_kernel_buf(). The latter expects those buffers to be contiguous pages, but setup_mm_hdr() just uses kmalloc(). That can cause various corruptions or BUGs, specifically since commit 9aec2fb0fd5e ("slab: allocate frozen pages"), though it was broken before as well. Fix this by using alloc_pages_exact() instead of kmalloc(). Fixes: c44b6be62e8d ("efi: Add tee-based EFI variable driver") Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Acked-by: Sumit Garg <sumit.garg@oss.qualcomm.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-08-20firmware: arm_scmi: Convert to SYSTEM_SLEEP_PM_OPSArnd Bergmann1-2/+2
commit 62d6b81e8bd207ad44eff39d1a0fe17f0df510a5 upstream. The old SET_SYSTEM_SLEEP_PM_OPS() macro leads to a warning about an unused function: | drivers/firmware/arm_scmi/scmi_power_control.c:363:12: error: | 'scmi_system_power_resume' defined but not used [-Werror=unused-function] | static int scmi_system_power_resume(struct device *dev) The proper way to do this these days is to use SYSTEM_SLEEP_PM_OPS() and pm_sleep_ptr(). Fixes: 9a0658d3991e ("firmware: arm_scmi: power_control: Ensure SCMI_SYSPOWER_IDLE is set early during resume") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Peng Fan <peng.fan@nxp.com> Message-Id: <20250709070107.1388512-1-arnd@kernel.org> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-08-20firmware: tegra: Fix IVC dependency problemsThierry Reding1-2/+3
[ Upstream commit 78eb18020a88a4eed15f5af7700ed570642ff8f1 ] The IVC code is library code that other drivers need to select if they need that library. However, if the symbol is user-selectable this can lead to conflicts. Fix this by making the symbol only selectable for COMPILE_TEST and add a select TEGRA_IVC to TEGRA_BPMP, which is currently the only user. Link: https://lore.kernel.org/r/20250506133118.1011777-10-thierry.reding@gmail.com Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-08-20firmware: arm_scmi: power_control: Ensure SCMI_SYSPOWER_IDLE is set early ↵Peng Fan1-5/+17
during resume [ Upstream commit 9a0658d3991e6c82df87584b253454842f22f965 ] Fix a race condition where a second suspend notification from another SCMI agent wakes the system before SCMI_SYSPOWER_IDLE is set, leading to ignored suspend requests. This is due to interrupts triggering early execution of `scmi_userspace_notifier()` before the SCMI state is updated. To resolve this, set SCMI_SYSPOWER_IDLE earlier in the device resume path, prior to `thaw_processes()`. This ensures the SCMI state is correct when the notifier runs, allowing the system to suspend again as expected. On some platforms using SCMI, SCP cannot distinguish between CPU idle and suspend since both result in cluster power-off. By explicitly setting the idle state early, the Linux SCMI agent can correctly re-suspend in response to external notifications. Signed-off-by: Peng Fan <peng.fan@nxp.com> Message-Id: <20250704-scmi-pm-v2-2-9316cec2f9cc@nxp.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-08-20firmware: arm_ffa: Change initcall level of ffa_init() to rootfs_initcallYeoreum Yun1-1/+1
[ Upstream commit 0e0546eabcd6c19765a8dbf5b5db3723e7b0ea75 ] The Linux IMA (Integrity Measurement Architecture) subsystem used for secure boot, file integrity, or remote attestation cannot be a loadable module for few reasons listed below: o Boot-Time Integrity: IMA’s main role is to measure and appraise files before they are used. This includes measuring critical system files during early boot (e.g., init, init scripts, login binaries). If IMA were a module, it would be loaded too late to cover those. o TPM Dependency: IMA integrates tightly with the TPM to record measurements into PCRs. The TPM must be initialized early (ideally before init_ima()), which aligns with IMA being built-in. o Security Model: IMA is part of a Trusted Computing Base (TCB). Making it a module would weaken the security model, as a potentially compromised system could delay or tamper with its initialization. IMA must be built-in to ensure it starts measuring from the earliest possible point in boot which inturn implies TPM must be initialised and ready to use before IMA. To enable integration of tpm_event_log with the IMA subsystem, the TPM drivers (tpm_crb and tpm_crb_ffa) also needs to be built-in. However with FF-A driver also being initialised at device initcall level, it can lead to an initialization order issue where: - crb_acpi_driver_init() may run before tpm_crb_ffa_driver()_init and ffa_init() - As a result, probing the TPM device via CRB over FFA is deferred - ima_init() (called as a late initcall) runs before deferred probe completes, IMA fails to find the TPM and logs the below error: | ima: No TPM chip found, activating TPM-bypass! Eventually it fails to generate boot_aggregate with PCR values. Because of the above stated dependency, the ffa driver needs to initialised before tpm_crb_ffa module to ensure IMA finds the TPM successfully when present. [ jarkko: reformatted some of the paragraphs because they were going past the 75 character boundary. ] Signed-off-by: Yeoreum Yun <yeoreum.yun@arm.com> Reviewed-by: Mimi Zohar <zohar@linux.ibm.com> Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-08-15arm64: fix unnecessary rebuilding when CONFIG_DEBUG_EFI=yMasahiro Yamada1-1/+1
[ Upstream commit 344b6580472451390d070c65c27f59716a1deecb ] When CONFIG_DEBUG_EFI is enabled, some objects are needlessly rebuilt. [Steps to reproduce] Enable CONFIG_DEBUG_EFI and run 'make' twice in a clean source tree. On the second run, arch/arm64/kernel/head.o is rebuilt even though no files have changed. $ make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- clean $ make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- [ snip ] $ make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- CALL scripts/checksyscalls.sh AS arch/arm64/kernel/head.o AR arch/arm64/kernel/built-in.a AR arch/arm64/built-in.a AR built-in.a [ snip ] The issue is caused by the use of the $(realpath ...) function. At the time arch/arm64/kernel/Makefile is parsed on the first run, $(objtree)/vmlinux does not exist. As a result, $(realpath $(objtree)/vmlinux) expands to an empty string. On the second run of Make, $(objtree)/vmlinux already exists, so $(realpath $(objtree)/vmlinux) expands to the absolute path of vmlinux. However, this change in the command line causes arch/arm64/kernel/head.o to be rebuilt. To address this issue, use $(abspath ...) instead, which does not require the file to exist. While $(abspath ...) does not resolve symlinks, this should be fine from a debugging perspective. The GNU Make manual [1] clearly explains the difference between the two: $(realpath names...) For each file name in names return the canonical absolute name. A canonical name does not contain any . or .. components, nor any repeated path separators (/) or symlinks. In case of a failure the empty string is returned. Consult the realpath(3) documentation for a list of possible failure causes. $(abspath namees...) For each file name in names return an absolute name that does not contain any . or .. components, nor any repeated path separators (/). Note that, in contrast to realpath function, abspath does not resolve symlinks and does not require the file names to refer to an existing file or directory. Use the wildcard function to test for existence. The same problem exists in drivers/firmware/efi/libstub/Makefile.zboot. On the first run of Make, $(obj)/vmlinuz.efi.elf does not exist when the Makefile is parsed, so -DZBOOT_EFI_PATH is set to an empty string. Replace $(realpath ...) with $(abspath ...) there as well. [1]: https://www.gnu.org/software/make/manual/make.html#File-Name-Functions Fixes: 757b435aaabe ("efi: arm64: Add vmlinux debug link to the Image binary") Fixes: a050910972bb ("efi/libstub: implement generic EFI zboot") Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Acked-by: Ard Biesheuvel <ardb@kernel.org> Link: https://lore.kernel.org/r/20250625125555.2504734-1-masahiroy@kernel.org Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-08-15firmware: arm_scmi: Fix up turbo frequencies selectionSibi Sankar1-1/+1
[ Upstream commit ad28fc31dd702871764e9294d4f2314ad78d24a9 ] Sustained frequency when greater than or equal to 4Ghz on 64-bit devices currently result in marking all frequencies as turbo. Address the turbo frequency selection bug by fixing the truncation. Fixes: a897575e79d7 ("firmware: arm_scmi: Add support for marking certain frequencies as turbo") Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com> Message-Id: <20250514214719.203607-1-quic_sibis@quicinc.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-07-08Merge tag 'efi-fixes-for-v6.16-1' of ↵Linus Torvalds1-4/+2
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi Pull EFI fixes from Ard Biesheuvel: - Drop preprocessor macros in zboot.lds which is not preprocessed - Fix zboot .data section size and raw size when SBAT is enabled * tag 'efi-fixes-for-v6.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi: efi: Fix .data section size calculations when .sbat is present efi: Drop preprocessor directives from zboot.lds
2025-07-03Merge tag 'samsung-fixes-6.16' of ↵Arnd Bergmann1-16/+9
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/fixes Samsung SoC fixes for v6.16 1. Correct CONFIG option in arm64 defconfig enabling the Qualcomm SoC SNPS EUSB2 phy driver, because Kconfig entry was renamed when changing the driver to a common one, shared with Samsung SoC, thus defconfig lost that driver effectively. 2. Exynos ACPM: Fix timeouts happening with multiple requests. * tag 'samsung-fixes-6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: firmware: exynos-acpm: fix timeouts on xfers handling arm64: defconfig: update renamed PHY_SNPS_EUSB2
2025-06-20efi: Fix .data section size calculations when .sbat is presentVitaly Kuznetsov1-2/+2
Commit 0f9a1739dd0e ("efi: zboot specific mechanism for embedding SBAT section") neglected to adjust the sizes of the .data section when CONFIG_EFI_SBAT_FILE is set. As the result, the produced PE binary is incorrect and some tools complain about it. E.g. 'sbsign' reports: # sbsign --key my.key --cert my.crt arch/arm64/boot/vmlinuz.efi warning: file-aligned section .data extends beyond end of file warning: checksum areas are greater than image size. Invalid section table? Note, '__data_size' is also used in the PE optional header and it is not entirely clear whether .sbat needs to be accounted as part of SizeOfInitializedData or not. As the header seems to be unused by the real world firmware, keeping the field equal to __data_size. Fixes: 0f9a1739dd0e ("efi: zboot specific mechanism for embedding SBAT section") Reported-by: Heinrich Schuchardt <heinrich.schuchardt@gmx.de> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2025-06-10efi: Drop preprocessor directives from zboot.ldsVitaly Kuznetsov1-2/+0
Older versions of `ld` don't seem to support preprocessor directives in linker scripts, e.g. on RHEL9's ld-2.35.2-63.el9 the build fails with: ld:./drivers/firmware/efi/libstub/zboot.lds:32: ignoring invalid character `#' in expression ld:./drivers/firmware/efi/libstub/zboot.lds:33: syntax error We don't seem to need these '#ifdef', no empty .sbat section is created when CONFIG_EFI_SBAT_FILE="": # objdump -h arch/arm64/boot/vmlinuz.efi arch/arm64/boot/vmlinuz.efi: file format pei-aarch64-little Sections: Idx Name Size VMA LMA File off Algn 0 .text 00b94000 0000000000001000 0000000000001000 00001000 2**2 CONTENTS, ALLOC, LOAD, READONLY, CODE 1 .data 00000200 0000000000b95000 0000000000b95000 00b95000 2**2 CONTENTS, ALLOC, LOAD, DATA Fixes: 0f9a1739dd0e ("efi: zboot specific mechanism for embedding SBAT section") Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2025-06-10firmware: exynos-acpm: fix timeouts on xfers handlingTudor Ambarus1-16/+9
The mailbox framework has a single inflight request at a time. If a request is sent while another is still active, it will be queued to the mailbox core ring buffer. ACPM protocol did not serialize the calls to the mailbox subsystem so we could start the timeout ticks in parallel for multiple requests, while just one was being inflight. Consider a hypothetical case where the xfer timeout is 100ms and an ACPM transaction takes 90ms: | 0ms: Message #0 is queued in mailbox layer and sent out, then sits | at acpm_dequeue_by_polling() with a timeout of 100ms | 1ms: Message #1 is queued in mailbox layer but not sent out yet. | Since send_message() doesn't block, it also sits at | acpm_dequeue_by_polling() with a timeout of 100ms | ... | 90ms: Message #0 is completed, txdone is called and message #1 is sent | 101ms: Message #1 times out since the count started at 1ms. Even though | it has only been inflight for 11ms. Fix the problem by moving mbox_send_message() and mbox_client_txdone() immediately after the message has been written to the TX queue and while still keeping the ACPM TX queue lock. We thus tie together the TX write with the doorbell ring and mark the TX as done after the doorbell has been rung. This guarantees that the doorbell has been rang before starting the timeout ticks. We should also see some performance improvement as we no longer wait to receive a response before ringing the doorbell for the next request, so the ACPM firmware shall be able to drain faster the TX queue. Another benefit is that requests are no longer able to ring the doorbell one for the other, so it eases debugging. Finally, the mailbox software queue will always contain a single doorbell request due to the serialization done at the ACPM TX queue level. Protocols like ACPM, that handle their own hardware queues need a passthrough mailbox API, where they are able to just ring the doorbell or flip a bit directly into the mailbox controller. The mailbox software queue mechanism, the locking done into the mailbox core is not really needed, so hopefully this lays the foundation for a passthrough mailbox API. Reported-by: André Draszik <andre.draszik@linaro.org> Fixes: a88927b534ba ("firmware: add Exynos ACPM protocol driver") Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org> Link: https://lore.kernel.org/r/20250606-acpm-timeout-v2-1-306b1aa07a6c@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2025-06-09firmware: arm_ffa: Replace mutex with rwlock to avoid sleep in atomic contextSudeep Holla1-11/+11
The current use of a mutex to protect the notifier hashtable accesses can lead to issues in the atomic context. It results in the below kernel warnings: | BUG: sleeping function called from invalid context at kernel/locking/mutex.c:258 | in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 9, name: kworker/0:0 | preempt_count: 1, expected: 0 | RCU nest depth: 0, expected: 0 | CPU: 0 UID: 0 PID: 9 Comm: kworker/0:0 Not tainted 6.14.0 #4 | Workqueue: ffa_pcpu_irq_notification notif_pcpu_irq_work_fn | Call trace: | show_stack+0x18/0x24 (C) | dump_stack_lvl+0x78/0x90 | dump_stack+0x18/0x24 | __might_resched+0x114/0x170 | __might_sleep+0x48/0x98 | mutex_lock+0x24/0x80 | handle_notif_callbacks+0x54/0xe0 | notif_get_and_handle+0x40/0x88 | generic_exec_single+0x80/0xc0 | smp_call_function_single+0xfc/0x1a0 | notif_pcpu_irq_work_fn+0x2c/0x38 | process_one_work+0x14c/0x2b4 | worker_thread+0x2e4/0x3e0 | kthread+0x13c/0x210 | ret_from_fork+0x10/0x20 To address this, replace the mutex with an rwlock to protect the notifier hashtable accesses. This ensures that read-side locking does not sleep and multiple readers can acquire the lock concurrently, avoiding unnecessary contention and potential deadlocks. Writer access remains exclusive, preserving correctness. This change resolves warnings from lockdep about potential sleep in atomic context. Cc: Jens Wiklander <jens.wiklander@linaro.org> Reported-by: Jérôme Forissier <jerome.forissier@linaro.org> Closes: https://github.com/OP-TEE/optee_os/issues/7394 Fixes: e0573444edbf ("firmware: arm_ffa: Add interfaces to request notification callbacks") Message-Id: <20250528-ffa_notif_fix-v1-3-5ed7bc7f8437@arm.com> Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org> Tested-by: Jens Wiklander <jens.wiklander@linaro.org> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2025-06-09firmware: arm_ffa: Move memory allocation outside the mutex lockingSudeep Holla1-24/+24
The notifier callback node allocation is currently done while holding the notify_lock mutex. While this is safe even if memory allocation may sleep, we need to move the allocation outside the locked region in preparation to move from using muxtes to rwlocks. Move the memory allocation to avoid potential sleeping in atomic context once the locks are moved from mutex to rwlocks. Fixes: e0573444edbf ("firmware: arm_ffa: Add interfaces to request notification callbacks") Message-Id: <20250528-ffa_notif_fix-v1-2-5ed7bc7f8437@arm.com> Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2025-06-09firmware: arm_ffa: Fix memory leak by freeing notifier callback nodeSudeep Holla1-0/+1
Commit e0573444edbf ("firmware: arm_ffa: Add interfaces to request notification callbacks") adds support for notifier callbacks by allocating and inserting a callback node into a hashtable during registration of notifiers. However, during unregistration, the code only removes the node from the hashtable without freeing the associated memory, resulting in a memory leak. Resolve the memory leak issue by ensuring the allocated notifier callback node is properly freed after it is removed from the hashtable entry. Fixes: e0573444edbf ("firmware: arm_ffa: Add interfaces to request notification callbacks") Message-Id: <20250528-ffa_notif_fix-v1-1-5ed7bc7f8437@arm.com> Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2025-06-07Merge tag 'kbuild-v6.16' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - Add support for the EXPORT_SYMBOL_GPL_FOR_MODULES() macro, which exports a symbol only to specified modules - Improve ABI handling in gendwarfksyms - Forcibly link lib-y objects to vmlinux even if CONFIG_MODULES=n - Add checkers for redundant or missing <linux/export.h> inclusion - Deprecate the extra-y syntax - Fix a genksyms bug when including enum constants from *.symref files * tag 'kbuild-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (28 commits) genksyms: Fix enum consts from a reference affecting new values arch: use always-$(KBUILD_BUILTIN) for vmlinux.lds kbuild: set y instead of 1 to KBUILD_{BUILTIN,MODULES} efi/libstub: use 'targets' instead of extra-y in Makefile module: make __mod_device_table__* symbols static scripts/misc-check: check unnecessary #include <linux/export.h> when W=1 scripts/misc-check: check missing #include <linux/export.h> when W=1 scripts/misc-check: add double-quotes to satisfy shellcheck kbuild: move W=1 check for scripts/misc-check to top-level Makefile scripts/tags.sh: allow to use alternative ctags implementation kconfig: introduce menu type enum docs: symbol-namespaces: fix reST warning with literal block kbuild: link lib-y objects to vmlinux forcibly even when CONFIG_MODULES=n tinyconfig: enable CONFIG_LD_DEAD_CODE_DATA_ELIMINATION docs/core-api/symbol-namespaces: drop table of contents and section numbering modpost: check forbidden MODULE_IMPORT_NS("module:") at compile time kbuild: move kbuild syntax processing to scripts/Makefile.build Makefile: remove dependency on archscripts for header installation Documentation/kbuild: Add new gendwarfksyms kABI rules Documentation/kbuild: Drop section numbers ...
2025-06-07Merge tag 'loongarch-6.16' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson Pull LoongArch updates from Huacai Chen: - Adjust the 'make install' operation - Support SCHED_MC (Multi-core scheduler) - Enable ARCH_SUPPORTS_MSEAL_SYSTEM_MAPPINGS - Enable HAVE_ARCH_STACKLEAK - Increase max supported CPUs up to 2048 - Introduce the numa_memblks conversion - Add PWM controller nodes in dts - Some bug fixes and other small changes * tag 'loongarch-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: platform/loongarch: laptop: Unregister generic_sub_drivers on exit platform/loongarch: laptop: Add backlight power control support platform/loongarch: laptop: Get brightness setting from EC on probe LoongArch: dts: Add PWM support to Loongson-2K2000 LoongArch: dts: Add PWM support to Loongson-2K1000 LoongArch: dts: Add PWM support to Loongson-2K0500 LoongArch: vDSO: Correctly use asm parameters in syscall wrappers LoongArch: Fix panic caused by NULL-PMD in huge_pte_offset() LoongArch: Preserve firmware configuration when desired LoongArch: Avoid using $r0/$r1 as "mask" for csrxchg LoongArch: Introduce the numa_memblks conversion LoongArch: Increase max supported CPUs up to 2048 LoongArch: Enable HAVE_ARCH_STACKLEAK LoongArch: Enable ARCH_SUPPORTS_MSEAL_SYSTEM_MAPPINGS LoongArch: Add SCHED_MC (Multi-core scheduler) support LoongArch: Add some annotations in archhelp LoongArch: Using generic scripts/install.sh in `make install` LoongArch: Add a default install.sh
2025-06-07Merge tag 'sound-fix-6.16-rc1' of ↵Linus Torvalds2-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "A collection of fix patches for the 6.16-rc1 merge window. Most of changes are about ASoC, especially lots of AVS driver fixes. Larger LOCs are seen in TAS571x codec drivers, but the changes are trivial and safe. The rest are all device-specific small fixes" * tag 'sound-fix-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (27 commits) ASoC: Intel: avs: boards: Fix rt5663 front end name ASoC: Intel: avs: Simplify verification of parse_int_array() result ALSA: usb-audio: Add implicit feedback quirk for RODE AI-1 ALSA: hda: Ignore unsol events for cards being shut down ALSA: hda: Add new pci id for AMD GPU display HD audio controller ALSA: hda: cs35l41: Constify regmap_irq_chip ALSA: usb-audio: Add a quirk for Lenovo Thinkpad Thunderbolt 3 dock ASoC: ti: omap-hdmi: Re-add dai_link->platform to fix card init ASoC: pcm: Do not open FEs with no BEs connected ASoC: rt1320: fix speaker noise when volume bar is 100% ASoC: Intel: avs: Include missing string.h ASoC: Intel: avs: Verify content returned by parse_int_array() ASoC: Intel: avs: Verify kcalloc() status when setting constraints ASoC: Intel: avs: Fix paths in MODULE_FIRMWARE hints ASoC: Intel: avs: Fix possible null-ptr-deref when initing hw ASoC: Intel: avs: Fix PPLCxFMT calculation ASoC: Intel: avs: Fix deadlock when the failing IPC is SET_D0IX ASoC: codecs: hda: Fix RPM usage count underflow ASoC: amd: yc: Add support for Lenovo Yoga 7 16ARP8 ASoC: tas571x: fix tas5733 num_controls ...
2025-06-06Merge tag 'drm-fixes-2025-06-06' of https://gitlab.freedesktop.org/drm/kernelLinus Torvalds1-8/+18
Pull more drm fixes from Simona Vetter: "Another small batch of drm fixes, this time with a different baseline and hence separate. Drivers: - ivpu: - dma_resv locking - warning fixes - reset failure handling - improve logging - update fw file names - fix cmdqueue unregister - panel-simple: add Evervision VGG644804 Core Changes: - sysfb: screen_info type check - video: screen_info for relocated pci fb - drm/sched: signal fence of killed job - dummycon: deferred takeover fix" * tag 'drm-fixes-2025-06-06' of https://gitlab.freedesktop.org/drm/kernel: sysfb: Fix screen_info type check for VGA video: screen_info: Relocate framebuffers behind PCI bridges accel/ivpu: Fix warning in ivpu_gem_bo_free() accel/ivpu: Trigger device recovery on engine reset/resume failure accel/ivpu: Use dma_resv_lock() instead of a custom mutex drm/panel-simple: fix the warnings for the Evervision VGG644804 accel/ivpu: Reorder Doorbell Unregister and Command Queue Destruction accel/ivpu: Use firmware names from upstream repo accel/ivpu: Improve buffer object logging dummycon: Trigger redraw when switching consoles with deferred takeover drm/scheduler: signal scheduled fence when kill job
2025-06-06Merge tag 'drm-misc-fixes-2025-06-06' of ↵Simona Vetter1-8/+18
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes Short summary of fixes pull: ivpu: - gem: Use dma-resv lock - gem. Fix a warning - Trigger recovery on device engine reset/resume failure panel: - panel-simple: Fix settings for Evervision VGG644804 sysfb: - Fix screen_info type check video: - Update screen_info for relocated PCI framebuffers Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20250606072853.GA13099@linux.fritz.box
2025-06-05efi/libstub: use 'targets' instead of extra-y in MakefileMasahiro Yamada1-1/+1
These objects are built as prerequisites of %.stub.o files. There is no need to use extra-y, which is planned for deprecation. Acked-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2025-06-05sysfb: Fix screen_info type check for VGAThomas Zimmermann1-8/+18
Use the helper screen_info_video_type() to get the framebuffer type from struct screen_info. Handle supported values in sorted switch statement. Reading orig_video_isVGA is unreliable. On most systems it is a VIDEO_TYPE_ constant. On some systems with VGA it is simply set to 1 to signal the presence of a VGA output. See vga_probe() for an example. Retrieving the screen_info type with the helper screen_info_video_type() detects these cases and returns the appropriate VIDEO_TYPE_ constant. For VGA, sysfb creates a device named "vga-framebuffer". The sysfb code has been taken from vga16fb, where it likely didn't work correctly either. With this bugfix applied, vga16fb loads for compatible vga-framebuffer devices. Fixes: 0db5b61e0dc0 ("fbdev/vga16fb: Create EGA/VGA devices in sysfb code") Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Javier Martinez Canillas <javierm@redhat.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Tzung-Bi Shih <tzungbi@kernel.org> Cc: Helge Deller <deller@gmx.de> Cc: "Uwe Kleine-König" <u.kleine-koenig@baylibre.com> Cc: Zsolt Kajtar <soci@c64.rulez.org> Cc: <stable@vger.kernel.org> # v6.1+ Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://lore.kernel.org/r/20250603154838.401882-1-tzimmermann@suse.de
2025-06-03Merge tag 'hyperv-next-signed-20250602' of ↵Linus Torvalds2-8/+19
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux Pull hyperv updates from Wei Liu: - Support for Virtual Trust Level (VTL) on arm64 (Roman Kisel) - Fixes for Hyper-V UIO driver (Long Li) - Fixes for Hyper-V PCI driver (Michael Kelley) - Select CONFIG_SYSFB for Hyper-V guests (Michael Kelley) - Documentation updates for Hyper-V VMBus (Michael Kelley) - Enhance logging for hv_kvp_daemon (Shradha Gupta) * tag 'hyperv-next-signed-20250602' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: (23 commits) Drivers: hv: Always select CONFIG_SYSFB for Hyper-V guests Drivers: hv: vmbus: Add comments about races with "channels" sysfs dir Documentation: hyperv: Update VMBus doc with new features and info PCI: hv: Remove unnecessary flex array in struct pci_packet Drivers: hv: Remove hv_alloc/free_* helpers Drivers: hv: Use kzalloc for panic page allocation uio_hv_generic: Align ring size to system page uio_hv_generic: Use correct size for interrupt and monitor pages Drivers: hv: Allocate interrupt and monitor pages aligned to system page boundary arch/x86: Provide the CPU number in the wakeup AP callback x86/hyperv: Fix APIC ID and VP index confusion in hv_snp_boot_ap() PCI: hv: Get vPCI MSI IRQ domain from DeviceTree ACPI: irq: Introduce acpi_get_gsi_dispatcher() Drivers: hv: vmbus: Introduce hv_get_vmbus_root_device() Drivers: hv: vmbus: Get the IRQ number from DeviceTree dt-bindings: microsoft,vmbus: Add interrupt and DMA coherence properties arm64, x86: hyperv: Report the VTL the system boots in arm64: hyperv: Initialize the Virtual Trust Level field Drivers: hv: Provide arch-neutral implementation of get_vtl() Drivers: hv: Enable VTL mode for arm64 ...
2025-05-31Merge tag 'soc-drivers-6.16' of ↵Linus Torvalds27-283/+2376
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull SoC driver updates from Arnd Bergmann: "Updates are across the usual driver subsystems with SoC specific drivers: - added soc specicific drivers for sophgo cv1800 and sg2044, qualcomm sm8750, and amlogic c3 and s4 chips. - cache controller updates for sifive chips, plus binding changes for other cache descriptions. - memory controller drivers for mediatek mt6893, stm32 and cleanups for a few more drivers - reset controller drivers for T-Head TH1502, Sophgo sg2044 and Renesas RZ/V2H(P) - SCMI firmware updates to better deal with buggy firmware, plus better support for Qualcomm X1E and NXP i.MX specific interfaces - a new platform driver for the crypto firmware on Cznic Turris Omnia/MOX - cleanups for the TEE firmware subsystem and amdtee driver - minor updates and fixes for freescale/nxp, qualcomm, google, aspeed, wondermedia, ti, nxp, renesas, hisilicon, mediatek, broadcom and samsung SoCs" * tag 'soc-drivers-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (133 commits) soc: aspeed: Add NULL check in aspeed_lpc_enable_snoop() soc: aspeed: lpc: Fix impossible judgment condition ARM: aspeed: Don't select SRAM docs: firmware: qcom_scm: Fix kernel-doc warning soc: fsl: qe: Consolidate chained IRQ handler install/remove firmware: qcom: scm: Allow QSEECOM for HP EliteBook Ultra G1q dt-bindings: mfd: qcom,tcsr: Add compatible for ipq5018 dt-bindings: cache: add QiLai compatible to ax45mp memory: stm32_omm: Fix error handling in stm32_omm_disable_child() dt-bindings: cache: Convert marvell,tauros2-cache to DT schema dt-bindings: cache: Convert marvell,{feroceon,kirkwood}-cache to DT schema soc: samsung: exynos-pmu: enable CPU hotplug support for gs101 MAINTAINERS: Add google,gs101-pmu-intr-gen.yaml binding file dt-bindings: soc: samsung: exynos-pmu: gs101: add google,pmu-intr-gen phandle dt-bindings: soc: google: Add gs101-pmu-intr-gen binding documentation bus: fsl-mc: Use strscpy() instead of strscpy_pad() soc: fsl: qbman: Remove const from portal->cgrs allocation type bus: fsl_mc: Fix driver_managed_dma check bus: fsl-mc: increase MC_CMD_COMPLETION_TIMEOUT_MS value bus: fsl-mc: drop useless cleanup ...
2025-05-30Merge tag 'efi-next-for-v6.16' of ↵Linus Torvalds7-8/+71
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi Pull EFI updates from Ard Biesheuvel: "Not a lot going on in the EFI tree this cycle. The only thing that stands out is the new support for SBAT metadata, which was a bit contentious when it was first proposed, because in the initial incarnation, it would have required us to maintain a revocation index, and bump it each time a vulnerability affecting UEFI secure boot got fixed. This was shot down for obvious reasons. This time, only the changes needed to emit the SBAT section into the PE/COFF image are being carried upstream, and it is up to the distros to decide what to put in there when creating and signing the build. This only has the EFI zboot bits (which the distros will be using for arm64); the x86 bzImage changes should be arriving next cycle, presumably via the -tip tree. Summary: - Add support for emitting a .sbat section into the EFI zboot image, so that downstreams can easily include revocation metadata in the signed EFI images - Align PE symbolic constant names with other projects - Bug fix for the efi_test module - Log the physical address and size of the EFI memory map when failing to map it - A kerneldoc fix for the EFI stub code" * tag 'efi-next-for-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi: include: pe.h: Fix PE definitions efi/efi_test: Fix missing pending status update in getwakeuptime efi: zboot specific mechanism for embedding SBAT section efi/libstub: Describe missing 'out' parameter in efi_load_initrd efi: Improve logging around memmap init
2025-05-30LoongArch: Enable HAVE_ARCH_STACKLEAKYouling Tang1-1/+1
Add support for the stackleak feature. It initializes the stack with the poison value before returning from system calls which improves the kernel security. At the same time, disables the plugin in EFI stub code because EFI stub is out of scope for the protection. Tested on Loongson-3A5000 (enable GCC_PLUGIN_STACKLEAK and LKDTM): # echo STACKLEAK_ERASING > /sys/kernel/debug/provoke-crash/DIRECT # dmesg lkdtm: Performing direct entry STACKLEAK_ERASING lkdtm: stackleak stack usage: high offset: 320 bytes current: 448 bytes lowest: 1264 bytes tracked: 1264 bytes untracked: 208 bytes poisoned: 14528 bytes low offset: 64 bytes lkdtm: OK: the rest of the thread stack is properly erased Signed-off-by: Youling Tang <tangyouling@kylinos.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2025-05-29Merge tag 'arm64-upstream' of ↵Linus Torvalds3-5/+11
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 updates from Will Deacon: "The headline feature is the re-enablement of support for Arm's Scalable Matrix Extension (SME) thanks to a bumper crop of fixes from Mark Rutland. If matrices aren't your thing, then Ryan's page-table optimisation work is much more interesting. Summary: ACPI, EFI and PSCI: - Decouple Arm's "Software Delegated Exception Interface" (SDEI) support from the ACPI GHES code so that it can be used by platforms booted with device-tree - Remove unnecessary per-CPU tracking of the FPSIMD state across EFI runtime calls - Fix a node refcount imbalance in the PSCI device-tree code CPU Features: - Ensure register sanitisation is applied to fields in ID_AA64MMFR4 - Expose AIDR_EL1 to userspace via sysfs, primarily so that KVM guests can reliably query the underlying CPU types from the VMM - Re-enabling of SME support (CONFIG_ARM64_SME) as a result of fixes to our context-switching, signal handling and ptrace code Entry code: - Hook up TIF_NEED_RESCHED_LAZY so that CONFIG_PREEMPT_LAZY can be selected Memory management: - Prevent BSS exports from being used by the early PI code - Propagate level and stride information to the low-level TLB invalidation routines when operating on hugetlb entries - Use the page-table contiguous hint for vmap() mappings with VM_ALLOW_HUGE_VMAP where possible - Optimise vmalloc()/vmap() page-table updates to use "lazy MMU mode" and hook this up on arm64 so that the trailing DSB (used to publish the updates to the hardware walker) can be deferred until the end of the mapping operation - Extend mmap() randomisation for 52-bit virtual addresses (on par with 48-bit addressing) and remove limited support for randomisation of the linear map Perf and PMUs: - Add support for probing the CMN-S3 driver using ACPI - Minor driver fixes to the CMN, Arm-NI and amlogic PMU drivers Selftests: - Fix FPSIMD and SME tests to align with the freshly re-enabled SME support - Fix default setting of the OUTPUT variable so that tests are installed in the right location vDSO: - Replace raw counter access from inline assembly code with a call to the the __arch_counter_get_cntvct() helper function Miscellaneous: - Add some missing header inclusions to the CCA headers - Rework rendering of /proc/cpuinfo to follow the x86-approach and avoid repeated buffer expansion (the user-visible format remains identical) - Remove redundant selection of CONFIG_CRC32 - Extend early error message when failing to map the device-tree blob" * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (83 commits) arm64: cputype: Add cputype definition for HIP12 arm64: el2_setup.h: Make __init_el2_fgt labels consistent, again perf/arm-cmn: Add CMN S3 ACPI binding arm64/boot: Disallow BSS exports to startup code arm64/boot: Move global CPU override variables out of BSS arm64/boot: Move init_pgdir[] and init_idmap_pgdir[] into __pi_ namespace perf/arm-cmn: Initialise cmn->cpu earlier kselftest/arm64: Set default OUTPUT path when undefined arm64: Update comment regarding values in __boot_cpu_mode arm64: mm: Drop redundant check in pmd_trans_huge() arm64/mm: Re-organise setting up FEAT_S1PIE registers PIRE0_EL1 and PIR_EL1 arm64/mm: Permit lazy_mmu_mode to be nested arm64/mm: Disable barrier batching in interrupt contexts arm64/cpuinfo: only show one cpu's info in c_show() arm64/mm: Batch barriers when updating kernel mappings mm/vmalloc: Enter lazy mmu mode while manipulating vmalloc ptes arm64/mm: Support huge pte-mapped pages in vmap mm/vmalloc: Gracefully unmap huge ptes mm/vmalloc: Warn on improper use of vunmap_range() arm64/mm: Hoist barriers out of set_ptes_anysz() loop ...
2025-05-28Merge tag 'drm-next-2025-05-28' of https://gitlab.freedesktop.org/drm/kernelLinus Torvalds2-30/+2
Pull drm updates from Dave Airlie: "As part of building up nova-core/nova-drm pieces we've brought in some rust abstractions through this tree, aux bus being the main one, with devres changes also in the driver-core tree. Along with the drm core abstractions and enough nova-core/nova-drm to use them. This is still all stub work under construction, to build the nova driver upstream. The other big NVIDIA related one is nouveau adds support for Hopper/Blackwell GPUs, this required a new GSP firmware update to 570.144, and a bunch of rework in order to support multiple fw interfaces. There is also the introduction of an asahi uapi header file as a precursor to getting the real driver in later, but to unblock userspace mesa packages while the driver is trapped behind rust enablement. Otherwise it's the usual mixture of stuff all over, amdgpu, i915/xe, and msm being the main ones, and some changes to vsprintf. new drivers: - bring in the asahi uapi header standalone - nova-drm: stub driver rust dependencies (for nova-core): - auxiliary - bus abstractions - driver registration - sample driver - devres changes from driver-core - revocable changes core: - add Apple fourcc modifiers - add virtio capset definitions - extend EXPORT_SYNC_FILE for timeline syncobjs - convert to devm_platform_ioremap_resource - refactor shmem helper page pinning - DP powerup/down link helpers - extended %p4cc in vsprintf.c to support fourcc prints - change vsprintf %p4cn to %p4chR, remove %p4cn - Add drm_file_err function - IN_FORMATS_ASYNC property - move sitronix from tiny to their own subdir rust: - add drm core infrastructure rust abstractions (device/driver, ioctl, file, gem) dma-buf: - adjust sg handling to not cache map on attach - allow setting dma-device for import - Add a helper to sort and deduplicate dma_fence arrays docs: - updated drm scheduler docs - fbdev todo update - fb rendering - actual brightness ttm: - fix delayed destroy resv object bridge: - add kunit tests - convert tc358775 to atomic - convert drivers to devm_drm_bridge_alloc - convert rk3066_hdmi to bridge driver scheduler: - add kunit tests panel: - refcount panels to improve lifetime handling - Powertip PH128800T004-ZZA01 - NLT NL13676BC25-03F, Tianma TM070JDHG34-00 - Himax HX8279/HX8279-D DDIC - Visionox G2647FB105 - Sitronix ST7571 - ZOTAC rotation quirk vkms: - allow attaching more displays i915: - xe3lpd display updates - vrr refactor - intel_display struct conversions - xe2hpd memory type identification - add link rate/count to i915_display_info - cleanup VGA plane handling - refactor HDCP GSC - fix SLPC wait boosting reference counting - add 20ms delay to engine reset - fix fence release on early probe errors xe: - SRIOV updates - BMG PCI ID update - support separate firmware for each GT - SVM fix, prelim SVM multi-device work - export fan speed - temp disable d3cold on BMG - backup VRAM in PM notifier instead of suspend/freeze - update xe_ttm_access_memory to use GPU for non-visible access - fix guc_info debugfs for VFs - use copy_from_user instead of __copy_from_user - append PCIe gen5 limitations to xe_firmware document amdgpu: - DSC cleanup - DC Scaling updates - Fused I2C-over-AUX updates - DMUB updates - Use drm_file_err in amdgpu - Enforce isolation updates - Use new dma_fence helpers - USERQ fixes - Documentation updates - SR-IOV updates - RAS updates - PSP 12 cleanups - GC 9.5 updates - SMU 13.x updates - VCN / JPEG SR-IOV updates amdkfd: - Update error messages for SDMA - Userptr updates - XNACK fixes radeon: - CIK doorbell cleanup nouveau: - add support for NVIDIA r570 GSP firmware - enable Hopper/Blackwell support nova-core: - fix task list - register definition infrastructure - move firmware into own rust module - register auxiliary device for nova-drm nova-drm: - initial driver skeleton msm: - GPU: - ACD (adaptive clock distribution) for X1-85 - drop fictional address_space_size - improve GMU HFI response time out robustness - fix crash when throttling during boot - DPU: - use single CTL path for flushing on DPU 5.x+ - improve SSPP allocation code for better sharing - Enabled SmartDMA on SM8150, SC8180X, SC8280XP, SM8550 - Added SAR2130P support - Disabled DSC support on MSM8937, MSM8917, MSM8953, SDM660 - DP: - switch to new audio helpers - better LTTPR handling - DSI: - Added support for SA8775P - Added SAR2130P support - HDMI: - Switched to use new helpers for ACR data - Fixed old standing issue of HPD not working in some cases amdxdna: - add dma-buf support - allow empty command submits renesas: - add dma-buf support - add zpos, alpha, blend support panthor: - fail properly for NO_MMAP bos - add SET_LABEL ioctl - debugfs BO dumping support imagination: - update DT bindings - support TI AM68 GPU hibmc: - improve interrupt handling and HPD support virtio: - add panic handler support rockchip: - add RK3588 support - add DP AUX bus panel support ivpu: - add heartbeat based hangcheck mediatek: - prepares support for MT8195/99 HDMIv2/DDCv2 anx7625: - improve HPD tegra: - speed up firmware loading * tag 'drm-next-2025-05-28' of https://gitlab.freedesktop.org/drm/kernel: (1627 commits) drm/nouveau/tegra: Fix error pointer vs NULL return in nvkm_device_tegra_resource_addr() drm/xe: Default auto_link_downgrade status to false drm/xe/guc: Make creation of SLPC debugfs files conditional drm/i915/display: Add check for alloc_ordered_workqueue() and alloc_workqueue() drm/i915/dp_mst: Work around Thunderbolt sink disconnect after SINK_COUNT_ESI read drm/i915/ptl: Use everywhere the correct DDI port clock select mask drm/nouveau/kms: add support for GB20x drm/dp: add option to disable zero sized address only transactions. drm/nouveau: add support for GB20x drm/nouveau/gsp: add hal for fifo.chan.doorbell_handle drm/nouveau: add support for GB10x drm/nouveau/gf100-: track chan progress with non-WFI semaphore release drm/nouveau/nv50-: separate CHANNEL_GPFIFO handling out from CHANNEL_DMA drm/nouveau: add helper functions for allocating pinned/cpu-mapped bos drm/nouveau: add support for GH100 drm/nouveau: improve handling of 64-bit BARs drm/nouveau/gv100-: switch to volta semaphore methods drm/nouveau/gsp: support deeper page tables in COPY_SERVER_RESERVED_PDES drm/nouveau/gsp: init client VMMs with NV0080_CTRL_DMA_SET_PAGE_DIRECTORY drm/nouveau/gsp: fetch level shift and PDE from BAR2 VMM ...
2025-05-28Merge tag 'sound-6.16-rc1' of ↵Linus Torvalds3-7/+18
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "We've received a lot of activities in this cycle, mostly about leaf driver codes rather than the core part, but with a good mixture of code cleanups and new driver additions. Below are some highlights: ASoC: - Support for automatically enumerating DAIs from standards conforming SoundWire SDCA devices; not much used as of this writing, rather for future implementations - Conversion of quite a few drivers to newer GPIO APIs - Continued cleanups and helper usages in allover places - Support for a wider range of Intel AVS platforms - Support for AMD ACP 7.x platforms, Cirrus Logic CS35L63 and CS48L32 Everest Semiconductor ES8375 and ES8389, Longsoon-1 AC'97 controllers, nVidia Tegra264, Richtek ALC203 and RT9123 and Rockchip SAI controllers HD-audio: - Lots of cleanups of TAS2781 codec drivers - A new HD-audio control bound via ACPI for Nvidia - Support for Tegra264, Intel WCL, usual new codec quirks USB-audio: - Fix a race at removal of MIDI device - Pioneer DJM-V10 support, Scarlett2 driver cleanups Misc: - Cleanups of deprecated PCI functions - Removal of unused / dead function codes" * tag 'sound-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (364 commits) firmware: cs_dsp: Fix OOB memory read access in KUnit test ASoC: codecs: add support for ES8375 ASoC: dt-bindings: Add Everest ES8375 audio CODEC ALSA: hda: acpi: Make driver's match data const static ALSA: hda: acpi: Use SYSTEM_SLEEP_PM_OPS() ALSA: atmel: Replace deprecated strcpy() with strscpy() ALSA: core: fix up bus match const issues. ASoC: wm_adsp: Make cirrus_dir const ASoC: tegra: Tegra264 support in isomgr_bw ASoC: tegra: AHUB: Add Tegra264 support ASoC: tegra: ADX: Add Tegra264 support ASoC: tegra: AMX: Add Tegra264 support ASoC: tegra: I2S: Add Tegra264 support ASoC: tegra: Update PLL rate for Tegra264 ASoC: tegra: ASRC: Update ARAM address ASoC: tegra: ADMAIF: Add Tegra264 support ASoC: tegra: CIF: Add Tegra264 support dt-bindings: ASoC: Document Tegra264 APE support dt-bindings: ASoC: admaif: Add missing properties ASoC: dt-bindings: audio-graph-card2: reference audio-graph routing property ...
2025-05-27Merge tag 'timers-cleanups-2025-05-25' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer cleanups from Thomas Gleixner: "Another set of timer API cleanups: - Convert init_timer*(), try_to_del_timer_sync() and destroy_timer_on_stack() over to the canonical timer_*() namespace convention. There is another large conversion pending, which has not been included because it would have caused a gazillion of merge conflicts in next. The conversion scripts will be run towards the end of the merge window and a pull request sent once all conflict dependencies have been merged" * tag 'timers-cleanups-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: treewide, timers: Rename destroy_timer_on_stack() as timer_destroy_on_stack() treewide, timers: Rename try_to_del_timer_sync() as timer_delete_sync_try() timers: Rename init_timers() as timers_init() timers: Rename NEXT_TIMER_MAX_DELTA as TIMER_NEXT_MAX_DELTA timers: Rename __init_timer_on_stack() as __timer_init_on_stack() timers: Rename __init_timer() as __timer_init() timers: Rename init_timer_on_stack_key() as timer_init_key_on_stack() timers: Rename init_timer_key() as timer_init_key()
2025-05-27Merge branch 'for-next/psci' into for-next/coreWill Deacon1-1/+3
* for-next/psci: firmware: psci: Fix refcount leak in psci_dt_init
2025-05-27Merge tag 'x86-core-2025-05-25' of ↵Linus Torvalds3-255/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull core x86 updates from Ingo Molnar: "Boot code changes: - A large series of changes to reorganize the x86 boot code into a better isolated and easier to maintain base of PIC early startup code in arch/x86/boot/startup/, by Ard Biesheuvel. Motivation & background: | Since commit | | c88d71508e36 ("x86/boot/64: Rewrite startup_64() in C") | | dated Jun 6 2017, we have been using C code on the boot path in a way | that is not supported by the toolchain, i.e., to execute non-PIC C | code from a mapping of memory that is different from the one provided | to the linker. It should have been obvious at the time that this was a | bad idea, given the need to sprinkle fixup_pointer() calls left and | right to manipulate global variables (including non-pointer variables) | without crashing. | | This C startup code has been expanding, and in particular, the SEV-SNP | startup code has been expanding over the past couple of years, and | grown many of these warts, where the C code needs to use special | annotations or helpers to access global objects. This tree includes the first phase of this work-in-progress x86 boot code reorganization. Scalability enhancements and micro-optimizations: - Improve code-patching scalability (Eric Dumazet) - Remove MFENCEs for X86_BUG_CLFLUSH_MONITOR (Andrew Cooper) CPU features enumeration updates: - Thorough reorganization and cleanup of CPUID parsing APIs (Ahmed S. Darwish) - Fix, refactor and clean up the cacheinfo code (Ahmed S. Darwish, Thomas Gleixner) - Update CPUID bitfields to x86-cpuid-db v2.3 (Ahmed S. Darwish) Memory management changes: - Allow temporary MMs when IRQs are on (Andy Lutomirski) - Opt-in to IRQs-off activate_mm() (Andy Lutomirski) - Simplify choose_new_asid() and generate better code (Borislav Petkov) - Simplify 32-bit PAE page table handling (Dave Hansen) - Always use dynamic memory layout (Kirill A. Shutemov) - Make SPARSEMEM_VMEMMAP the only memory model (Kirill A. Shutemov) - Make 5-level paging support unconditional (Kirill A. Shutemov) - Stop prefetching current->mm->mmap_lock on page faults (Mateusz Guzik) - Predict valid_user_address() returning true (Mateusz Guzik) - Consolidate initmem_init() (Mike Rapoport) FPU support and vector computing: - Enable Intel APX support (Chang S. Bae) - Reorgnize and clean up the xstate code (Chang S. Bae) - Make task_struct::thread constant size (Ingo Molnar) - Restore fpu_thread_struct_whitelist() to fix CONFIG_HARDENED_USERCOPY=y (Kees Cook) - Simplify the switch_fpu_prepare() + switch_fpu_finish() logic (Oleg Nesterov) - Always preserve non-user xfeatures/flags in __state_perm (Sean Christopherson) Microcode loader changes: - Help users notice when running old Intel microcode (Dave Hansen) - AMD: Do not return error when microcode update is not necessary (Annie Li) - AMD: Clean the cache if update did not load microcode (Boris Ostrovsky) Code patching (alternatives) changes: - Simplify, reorganize and clean up the x86 text-patching code (Ingo Molnar) - Make smp_text_poke_batch_process() subsume smp_text_poke_batch_finish() (Nikolay Borisov) - Refactor the {,un}use_temporary_mm() code (Peter Zijlstra) Debugging support: - Add early IDT and GDT loading to debug relocate_kernel() bugs (David Woodhouse) - Print the reason for the last reset on modern AMD CPUs (Yazen Ghannam) - Add AMD Zen debugging document (Mario Limonciello) - Fix opcode map (!REX2) superscript tags (Masami Hiramatsu) - Stop decoding i64 instructions in x86-64 mode at opcode (Masami Hiramatsu) CPU bugs and bug mitigations: - Remove X86_BUG_MMIO_UNKNOWN (Borislav Petkov) - Fix SRSO reporting on Zen1/2 with SMT disabled (Borislav Petkov) - Restructure and harmonize the various CPU bug mitigation methods (David Kaplan) - Fix spectre_v2 mitigation default on Intel (Pawan Gupta) MSR API: - Large MSR code and API cleanup (Xin Li) - In-kernel MSR API type cleanups and renames (Ingo Molnar) PKEYS: - Simplify PKRU update in signal frame (Chang S. Bae) NMI handling code: - Clean up, refactor and simplify the NMI handling code (Sohil Mehta) - Improve NMI duration console printouts (Sohil Mehta) Paravirt guests interface: - Restrict PARAVIRT_XXL to 64-bit only (Kirill A. Shutemov) SEV support: - Share the sev_secrets_pa value again (Tom Lendacky) x86 platform changes: - Introduce the <asm/amd/> header namespace (Ingo Molnar) - i2c: piix4, x86/platform: Move the SB800 PIIX4 FCH definitions to <asm/amd/fch.h> (Mario Limonciello) Fixes and cleanups: - x86 assembly code cleanups and fixes (Uros Bizjak) - Misc fixes and cleanups (Andi Kleen, Andy Lutomirski, Andy Shevchenko, Ard Biesheuvel, Bagas Sanjaya, Baoquan He, Borislav Petkov, Chang S. Bae, Chao Gao, Dan Williams, Dave Hansen, David Kaplan, David Woodhouse, Eric Biggers, Ingo Molnar, Josh Poimboeuf, Juergen Gross, Malaya Kumar Rout, Mario Limonciello, Nathan Chancellor, Oleg Nesterov, Pawan Gupta, Peter Zijlstra, Shivank Garg, Sohil Mehta, Thomas Gleixner, Uros Bizjak, Xin Li)" * tag 'x86-core-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (331 commits) x86/bugs: Fix spectre_v2 mitigation default on Intel x86/bugs: Restructure ITS mitigation x86/xen/msr: Fix uninitialized variable 'err' x86/msr: Remove a superfluous inclusion of <asm/asm.h> x86/paravirt: Restrict PARAVIRT_XXL to 64-bit only x86/mm/64: Make 5-level paging support unconditional x86/mm/64: Make SPARSEMEM_VMEMMAP the only memory model x86/mm/64: Always use dynamic memory layout x86/bugs: Fix indentation due to ITS merge x86/cpuid: Rename hypervisor_cpuid_base()/for_each_possible_hypervisor_cpuid_base() to cpuid_base_hypervisor()/for_each_possible_cpuid_base_hypervisor() x86/cpu/intel: Rename CPUID(0x2) descriptors iterator parameter x86/cacheinfo: Rename CPUID(0x2) descriptors iterator parameter x86/cpuid: Rename cpuid_get_leaf_0x2_regs() to cpuid_leaf_0x2() x86/cpuid: Rename have_cpuid_p() to cpuid_feature() x86/cpuid: Set <asm/cpuid/api.h> as the main CPUID header x86/cpuid: Move CPUID(0x2) APIs into <cpuid/api.h> x86/msr: Add rdmsrl_on_cpu() compatibility wrapper x86/mm: Fix kernel-doc descriptions of various pgtable methods x86/asm-offsets: Export certain 'struct cpuinfo_x86' fields for 64-bit asm use too x86/boot: Defer initialization of VM space related global variables ...
2025-05-26firmware: cs_dsp: Fix OOB memory read access in KUnit test (ctl cache)Jaroslav Kysela1-1/+0
KASAN reported out of bounds access - cs_dsp_ctl_cache_init_multiple_offsets(). The code uses mock_coeff_template.length_bytes (4 bytes) for register value allocations. But later, this length is set to 8 bytes which causes test code failures. As fix, just remove the lenght override, keeping the original value 4 for all operations. Cc: Simon Trimmer <simont@opensource.cirrus.com> Cc: Charles Keepax <ckeepax@opensource.cirrus.com> Cc: Richard Fitzgerald <rf@opensource.cirrus.com> Cc: patches@opensource.cirrus.com Cc: stable@vger.kernel.org Signed-off-by: Jaroslav Kysela <perex@perex.cz> Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com> Link: https://patch.msgid.link/20250523154151.1252585-1-perex@perex.cz Signed-off-by: Mark Brown <broonie@kernel.org>
2025-05-26firmware: cs_dsp: Fix OOB memory read access in KUnit test (wmfw info)Jaroslav Kysela1-1/+2
KASAN reported out of bounds access - cs_dsp_mock_wmfw_add_info(), because the source string length was rounded up to the allocation size. Cc: Simon Trimmer <simont@opensource.cirrus.com> Cc: Charles Keepax <ckeepax@opensource.cirrus.com> Cc: Richard Fitzgerald <rf@opensource.cirrus.com> Cc: patches@opensource.cirrus.com Cc: stable@vger.kernel.org Signed-off-by: Jaroslav Kysela <perex@perex.cz> Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com> Link: https://patch.msgid.link/20250523155814.1256762-1-perex@perex.cz Signed-off-by: Mark Brown <broonie@kernel.org>
2025-05-23arm64: kvm, smccc: Introduce and use API for getting hypervisor UUIDRoman Kisel2-8/+19
The KVM/arm64 uses SMCCC to detect hypervisor presence. That code is private, and it follows the SMCCC specification. Other existing and emerging hypervisor guest implementations can and should use that standard approach as well. Factor out a common infrastructure that the guests can use, update KVM to employ the new API. The central notion of the SMCCC method is the UUID of the hypervisor, and the new API follows that. No functional changes. Validated with a KVM/arm64 guest. Signed-off-by: Roman Kisel <romank@linux.microsoft.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Michael Kelley <mhklinux@outlook.com> Link: https://lore.kernel.org/r/20250428210742.435282-2-romank@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <20250428210742.435282-2-romank@linux.microsoft.com>
2025-05-23Merge tag 'soc-fixes-6.15-3' of ↵Linus Torvalds1-14/+30
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull SoC fixes from Arnd Bergmann: "A few last minute fixes: - two driver fixes for samsung/google platforms, both addressing mistakes in changes from the 6.15 merge window - a revert for an allwinner devicetree change that caused problems - a fix for an older regression with the LEDs on Marvell Armada 3720 - a defconfig change to enable chacha20 again after a crypto subsystem change in 6.15 inadventently turned it off" * tag 'soc-fixes-6.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: arm64: defconfig: Ensure CRYPTO_CHACHA20_NEON is selected arm64: dts: marvell: uDPU: define pinctrl state for alarm LEDs Revert "arm64: dts: allwinner: h6: Use RSB for AXP805 PMIC connection" soc: samsung: usi: prevent wrong bits inversion during unconfiguring firmware: exynos-acpm: check saved RX before bailing out on empty RX queue
2025-05-23firmware: cs_dsp: Fix OOB memory read access in KUnit testJaroslav Kysela1-1/+2
KASAN reported out of bounds access - cs_dsp_mock_bin_add_name_or_info(), because the source string length was rounded up to the allocation size. Cc: Simon Trimmer <simont@opensource.cirrus.com> Cc: Charles Keepax <ckeepax@opensource.cirrus.com> Cc: Richard Fitzgerald <rf@opensource.cirrus.com> Cc: patches@opensource.cirrus.com Cc: stable@vger.kernel.org Signed-off-by: Jaroslav Kysela <perex@perex.cz> Link: https://patch.msgid.link/20250523102102.1177151-1-perex@perex.cz Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2025-05-22Merge tag 'qcom-drivers-for-6.16-2' of ↵Arnd Bergmann2-0/+4
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers More Qualcomm driver updates for v6.16 Allow HP EliteBook Ultra G1q to use QSSECOM for UEFI variable acecss. Add missing compatible for IPQ5018 TCSR block. Fix a kernel-doc warning in SCM driver. * tag 'qcom-drivers-for-6.16-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: docs: firmware: qcom_scm: Fix kernel-doc warning firmware: qcom: scm: Allow QSEECOM for HP EliteBook Ultra G1q dt-bindings: mfd: qcom,tcsr: Add compatible for ipq5018 Link: https://lore.kernel.org/r/20250520024916.39712-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-05-21Merge tag 'qcom-drivers-for-6.16' of ↵Arnd Bergmann2-0/+3
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers Qualcomm driver updates for v6.16 Allow list QSEECOM for EFI variable services on on the Asus Zenbook A14, and block list TZMEM on the SM7150 platform to avoid issues with rmtfs. Extend the last-level cache (llcc) driver to support version 6 of the hardware and enable SM8750 support. Also add socinfo for the SM8750 platform. Re-enable UCSI support on SC8280XP, now that the reported crash has been dealt with, and filter the altmode notifications to avoid spurious hotplug events being propagated to user space. Add SM7150 support to pd-mapper. * tag 'qcom-drivers-for-6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: soc: qcom: llcc-qcom: Add support for SM8750 soc: qcom: llcc-qcom: Add support for LLCC V6 dt-bindings: cache: qcom,llcc: Document SM8750 LLCC block soc: qcom: socinfo: add SM8750 SoC ID dt-bindings: arm: qcom,ids: add SoC ID for SM8750 dt-bindings: soc: qcom: qcom,rpm: add missing clock/-names properties dt-bindings: soc: qcom,rpm: add missing clock-controller node soc: qcom: smem: Update max processor count firmware: qcom: tzmem: disable sm7150 platform soc: qcom: pd-mapper: Add support for SM7150 soc: qcom: pmic_glink_altmode: fix spurious DP hotplug events soc: qcom: smp2p: Fix fallback to qcom,ipc parse soc: qcom: pmic_glink: enable UCSI on sc8280xp firmware: qcom: scm: Allow QSEECOM on Asus Zenbook A14 dt-bindings: soc: qcom,rpmh-rsc: Limit power-domains requirement Link: https://lore.kernel.org/r/20250513215656.44448-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-05-21Merge tag 'ti-driver-soc-for-v6.16' of ↵Arnd Bergmann1-3/+11
https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/drivers TI SoC driver updates for v6.16 - ti_sci: Bug fix in CPU latency conversion from us to ms for TISCI protocol - k3-socinfo: Add JTAG ID for AM62LX - Code cleanups: wkup_m3_ipc: Use dev_err_probe, k3-ringacc: use device_match_of_probe and knav_qmss_queue: drop unnecessary NULL check * tag 'ti-driver-soc-for-v6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux: soc: ti: wkup_m3_ipc: Use dev_err_probe firmware: ti_sci: Convert CPU latency constraint from us to ms soc: ti: k3-socinfo: Add JTAG ID for AM62LX soc: ti: knav_qmss_queue: Remove unnecessary NULL check before free_percpu() soc: ti: k3-ringacc: Use device_match_of_node() Link: https://lore.kernel.org/r/20250512144719.mpkyw2jbyzslb5hy@yearly Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-05-21Merge tag 'samsung-fixes-6.15' of ↵Arnd Bergmann1-14/+30
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/fixes Samsung SoC driver fixes for v6.15 1. Exynos ACPM driver (used on Google GS101): Fix timeout due to missing responses from the firmware part. 2. Samsung USI (serial engines) driver: Correct ineffective unconfiguring of the interface during probe removal. * tag 'samsung-fixes-6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: soc: samsung: usi: prevent wrong bits inversion during unconfiguring firmware: exynos-acpm: check saved RX before bailing out on empty RX queue Link: https://lore.kernel.org/r/20250513101023.21552-5-krzysztof.kozlowski@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-05-21include: pe.h: Fix PE definitionsPali Rohár1-5/+5
* Rename constants to their standard PE names: - MZ_MAGIC -> IMAGE_DOS_SIGNATURE - PE_MAGIC -> IMAGE_NT_SIGNATURE - PE_OPT_MAGIC_PE32_ROM -> IMAGE_ROM_OPTIONAL_HDR_MAGIC - PE_OPT_MAGIC_PE32 -> IMAGE_NT_OPTIONAL_HDR32_MAGIC - PE_OPT_MAGIC_PE32PLUS -> IMAGE_NT_OPTIONAL_HDR64_MAGIC - IMAGE_DLL_CHARACTERISTICS_NX_COMPAT -> IMAGE_DLLCHARACTERISTICS_NX_COMPAT * Import constants and their description from readpe and file projects which contains current up-to-date information: - IMAGE_FILE_MACHINE_* - IMAGE_FILE_* - IMAGE_SUBSYSTEM_* - IMAGE_DLLCHARACTERISTICS_* - IMAGE_DLLCHARACTERISTICS_EX_* - IMAGE_DEBUG_TYPE_* * Add missing IMAGE_SCN_* constants and update their incorrect description * Fix incorrect value of IMAGE_SCN_MEM_PURGEABLE constant * Add description for win32_version and loader_flags PE fields Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2025-05-21efi/efi_test: Fix missing pending status update in getwakeuptimeIvan Hu1-0/+4
The pending status was not being passed to user space, leading to false test alarms when using the pending status. This patch ensures that the pending status is correctly updated and exposed to user space when calling getwakeuptime, preventing incorrect handling of the pending status. Signed-off-by: Ivan Hu <ivan.hu@canonical.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2025-05-21Merge branch 'efi-sbat' into efi/nextArd Biesheuvel4-2/+59
2025-05-21efi: zboot specific mechanism for embedding SBAT sectionVitaly Kuznetsov4-2/+59
SBAT is a mechanism which improves SecureBoot revocations of UEFI binaries by introducing a generation-based technique. Compromised or vulnerable UEFI binaries can be prevented from booting by bumping the minimal required generation for the specific component in the bootloader. More information on the SBAT can be obtained here: https://github.com/rhboot/shim/blob/main/SBAT.md Upstream Linux kernel does not currently participate in any way in SBAT as there's no existing policy in how SBAT generation number should be defined. Keep the status quo and provide a mechanism for distro vendors and anyone else who signs their kernel for SecureBoot to include their own SBAT data. This leaves the decision on the policy to the vendor. Basically, each distro implementing SecureBoot today, will have an option to inject their own SBAT data during kernel build and before it gets signed by their SecureBoot CA. Different distro do not need to agree on the common SBAT component names or generation numbers as each distro ships its own 'shim' with their own 'vendor_cert'/'vendor_db' Implement support for embedding SBAT data for architectures using zboot (arm64, loongarch, riscv). Put '.sbat' section in between '.data' and '.text' as the former also covers '.bss' and thus must be the last one. Reviewed-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2025-05-20docs: firmware: qcom_scm: Fix kernel-doc warningUnnathi Chalicheemala1-0/+3
Add description for members of qcom_scm_desc struct to avoid: drivers/firmware/qcom/qcom_scm.h:56: warning: Function parameter or struct member 'svc' not described in 'qcom_scm_desc' drivers/firmware/qcom/qcom_scm.h:56: warning: Function parameter or struct member 'cmd' not described in 'qcom_scm_desc' drivers/firmware/qcom/qcom_scm.h:56: warning: Function parameter or struct member 'owner' not described in 'qcom_scm_desc' Signed-off-by: Unnathi Chalicheemala <unnathi.chalicheemala@oss.qualcomm.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Link: https://lore.kernel.org/r/20250403-fix_scm_doc_warn-v1-1-9cd36345db77@oss.qualcomm.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-21 22:04:35 +0300