summaryrefslogtreecommitdiff
path: root/drivers/extcon/extcon.c
AgeCommit message (Collapse)AuthorFilesLines
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 282Thomas Gleixner1-9/+1
Based on 1 normalized pattern(s): this software is licensed under the terms of the gnu general public license version 2 as published by the free software foundation and may be copied distributed and modified under those terms this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 285 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141900.642774971@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-28extcon: Switch to use kasprintf() instead of open codedAndy Shevchenko1-10/+3
Switch to use kasprintf() instead of open coded variant. No functional change intended. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2018-08-28extcon: Make static analyzer happy about union assignmentAndy Shevchenko1-1/+1
When assign unions we need to supply non-scalar value, otherwise static analyzer is not happy: CHECK drivers/extcon/extcon.c drivers/extcon/extcon.c:631:22: warning: cast to non-scalar Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2018-07-12extcon: Release locking when sending the notification of connector stateChanwoo Choi1-1/+2
Previously, extcon used the spinlock before calling the notifier_call_chain to prevent the scheduled out of task and to prevent the notification delay. When spinlock is locked for sending the notification, deadlock issue occured on the side of extcon consumer device. To fix this issue, extcon consumer device should always use the work. it is always not reasonable to use work. To fix this issue on extcon consumer device, release locking when sending the notification of connector state. Fixes: ab11af049f88 ("extcon: Add the synchronization extcon APIs to support the notification") Cc: stable@vger.kernel.org Cc: Roger Quadros <rogerq@ti.com> Cc: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2018-06-13treewide: kzalloc() -> kcalloc()Kees Cook1-10/+14
The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-03-08extcon: add possibility to get extcon device by OF nodeAndrzej Hajda1-10/+34
Since extcon property is not allowed in DT, extcon subsystem requires another way to get extcon device. Lets try the simplest approach - get edev by of_node. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2017-10-23extcon: make extcon_info static const, fixes warningColin Ian King1-1/+1
The array extcon_info is read only, local to the source and does not need to be in global scope, so make it static const. Cleans up sparse warning: symbol 'extcon_info' was not declared. Should it be static? Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2017-08-16extcon: Correct description to improve the readabilityChanwoo Choi1-140/+134
The extcon files explains the detailed operation for functions and what is meaning of extcon structure. There are different explanation even if the same argument. So, it modifies the description for both functions and structures in order to improve the readability and guide the role of functions more well. Also, this patch fixes the mismatching license info as a GPL v2 and removes the inactive author information. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2017-08-16extcon: Remove unused CABLE_NAME_MAX definitionChanwoo Choi1-1/+0
This patch removes the unused CABLE_NAME_MAX definition. Signed-off-by: Chanwoo Choi <cwchoi00@gmail.com>
2017-07-19extcon: Convert to using %pOF instead of full_nameRob Herring1-2/+2
Now that we have a custom printf format specifier, convert users of full_name to use %pOF instead. This is preparation to remove storing of the full path string for each node. Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2017-05-23extcon: Fix a typo in three comment linesMarkus Elfring1-3/+3
Adjust three words in this description for a function. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2017-05-23extcon: Use devm_kcalloc() in extcon_dev_register()Markus Elfring1-3/+2
A multiplication for the size determination of a memory allocation indicated that an array data structure should be processed. Thus use the corresponding function "devm_kcalloc". Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2017-04-06extcon: Use BIT() macro for the left-shift operationChanwoo Choi1-1/+1
This patch just uses the BIT() macro to make the code simple. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2017-04-06extcon: Remove porting compatibility of swich classChanwoo Choi1-20/+0
This patch removes the porting compatibility for switch class because there is no any usage and requirement of swich class over a couple of years. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2017-04-04extcon: Add new extcon_register_notifier_all() to monitor all external ↵Chanwoo Choi1-0/+66
connectors The extcon core already provides the extcon_register_notifier() function in order to register the notifier block which is used to monitor the state change for the specific external connector such as EXTCON_USB, EXTCON_USB_HOST and so on. The extcon consumer uses the this function. The extcon consumer might need to monitor the all supported external connectors from the extcon device. In this case, The extcon consumer should have each notifier_block structure for each external connector. This patch adds the new extcon_register_notifier_all() function that extcon consumer is able to monitor the state change of all supported external connectors by using only one notifier_block structure. - List of new added functions: int extcon_register_notifier_all(struct extcon_dev *edev, struct notifier_block *nb); int extcon_unregister_notifier_all(struct extcon_dev *edev, struct notifier_block *nb); int devm_extcon_register_notifier_all(struct device *dev, struct extcon_dev *edev, struct notifier_block *nb); void devm_extcon_unregister_notifier_all(struct device *dev, struct extcon_dev *edev, struct notifier_block *nb); Suggested-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Hans de Goede <hdegoede@redhat.com>
2017-01-09extcon: Modify the name of EXTCON_USB_HOST connectorChanwoo Choi1-1/+1
This patch renames the EXTCON_USB_HOST by using '-' char because the name of all external connector use the '-' char instead of '_' char. - "USB_HOST" -> "USB-HOST" Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2017-01-09extcon: Add new EXTCON_CHG_USB_PD type for USB Power DeliveryChanwoo Choi1-0/+5
This patch adds the new EXTCON_CHG_USB_PD for USB PD (Power Delivery)[1]. The USB Power Delivery specification specifies that USB cable provides the increased power more than 7.5W to device with larger power demand. The EXTCON_CHG_USB_PD has the EXTCON_TYPE_CHG and EXTCON_TYPE_USB type. [1] https://en.wikipedia.org/wiki/USB#PD Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2017-01-09extcon: Move defintion of struct extcon_dev to driver/extcon directoryChanwoo Choi1-1/+2
This patch moves the 'struct extcon_dev' of extcon subsystem to driver/extcon/extcon.h header file because the struct extcon_dev have to be handled by extcon API to guarantee the consistency of strcut extcon_dev. If external drivers are able to touch the struct extcon_dev directly, it might cause the critical and unknown problem. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2017-01-09extcon: Remove potential problem when calling extcon_register_notifier()Chanwoo Choi1-26/+7
This patch removes the potential problem of extcon_register_notifier() when edev parameter is NULL. When edev is NULL, this function returns the first extcon device which includes the sepecific external connector of second paramter. But, it don't guarantee the same operation in all cases. To remove this confusion and potential problem, this patch fixes it. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2017-01-09extcon: Return error code on failurePan Bian1-1/+1
Function get_zeroed_page() returns a NULL pointer if there is no enough memory. In function extcon_sync(), it returns 0 if the call to get_zeroed_page() fails. The return value 0 indicates success in the context, which is incosistent with the execution status. This patch fixes the bug by returning -ENOMEM. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=188611 Signed-off-by: Pan Bian <bianpan2016@163.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2016-08-08extcon: Add new EXTCON_CHG_WPT for Wireless Power Transfer deviceChanwoo Choi1-0/+5
This patchs add the new EXTCON_CHG_WPT for Wireless Power Transfer[1]. The Wireless Power Transfer is the transmission of electronical energy from a power source. The EXTCON_CHG_WPT has the EXTCON_TYPE_CHG. [1] https://en.wikipedia.org/wiki/Wireless_power_transfer Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2016-08-08extcon: Add new EXTCON_DISP_HMD for Head-mounted Display deviceChanwoo Choi1-0/+5
This patch adds the new EXTCON_DISP_HMD id for Head-mounted Display[1] device. The HMD device is usually for USB connector type So, the HMD connector has the two extcon types of both EXTCON_TYPE_DISP and EXTCON_TYPE_USB. [1] https://en.wikipedia.org/wiki/Head-mounted_display Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2016-08-08extcon: Add EXTCON_DISP_DP and the property for USB Type-CChris Zhong1-0/+5
Add EXTCON_DISP_DP for the Display external connector. For Type-C connector the DisplayPort can work as an Alternate Mode(VESA DisplayPort Alt Mode on USB Type-C Standard). The Type-C support both normal and flipped orientation, so add a property to extcon. Signed-off-by: Chris Zhong <zyw@rock-chips.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Chris Zhong <zyw@rock-chips.com> Tested-by: Guenter Roeck <groeck@chromium.org> Reviewed-by: Guenter Roeck <groeck@chromium.org>
2016-08-08extcon: Add the synchronization extcon APIs to support the notificationChanwoo Choi1-75/+135
This patch adds the synchronization extcon APIs to support the notifications for both state and property. When extcon_*_sync() functions is called, the extcon informs the information from extcon provider to extcon client. The extcon driver may need to change the both state and multiple properties at the same time. After setting the data of a external connector, the extcon send the notification to client driver with the extcon_*_sync(). The list of new extcon APIs as following: - extcon_sync() : Send the notification for each external connector to synchronize the information between extcon provider driver and extcon client driver. - extcon_set_state_sync() : Set the state of external connector with noti. - extcon_set_property_sync() : Set the property of external connector with noti. For example, case 1, change the state of external connector and synchronized the data. extcon_set_state_sync(edev, EXTCON_USB, 1); case 2, change both the state and property of external connector and synchronized the data. extcon_set_state(edev, EXTCON_USB, 1); extcon_set_property(edev, EXTCON_USB, EXTCON_PROP_USB_VBUS 1); extcon_sync(edev, EXTCON_USB); case 3, change the property of external connector and synchronized the data. extcon_set_property(edev, EXTCON_USB, EXTCON_PROP_USB_VBUS, 0); extcon_sync(edev, EXTCON_USB); case 4, change the property of external connector and synchronized the data. extcon_set_property_sync(edev, EXTCON_USB, EXTCON_PROP_USB_VBUS, 0); Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Chris Zhong <zyw@rock-chips.com> Tested-by: Guenter Roeck <groeck@chromium.org> Reviewed-by: Guenter Roeck <groeck@chromium.org>
2016-08-08extcon: Rename the extcon_set/get_state() to maintain the function naming ↵Chanwoo Choi1-15/+13
pattern This patch just renames the existing extcon_get/set_cable_state_() as following because of maintaining the function naming pattern like as extcon APIs for property. - extcon_set_cable_state_() -> extcon_set_state() - extcon_get_cable_state_() -> extcon_get_state() But, this patch remains the old extcon_set/get_cable_state_() functions to prevent the build break. After altering new APIs, remove the old APIs. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Chris Zhong <zyw@rock-chips.com> Tested-by: Guenter Roeck <groeck@chromium.org> Reviewed-by: Guenter Roeck <groeck@chromium.org>
2016-08-08extcon: Add the support for the capability of each propertyChanwoo Choi1-0/+140
This patch adds the support of the property capability setting. This function decides the supported properties of each external connector on extcon provider driver. Ths list of new extcon APIs to get/set the capability of property as following: - int extcon_get_property_capability(struct extcon_dev *edev, unsigned int id, unsigned int prop); - int extcon_set_property_capability(struct extcon_dev *edev, unsigned int id, unsigned int prop); Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Chris Zhong <zyw@rock-chips.com> Tested-by: Guenter Roeck <groeck@chromium.org> Reviewed-by: Guenter Roeck <groeck@chromium.org>
2016-08-08extcon: Add the support for extcon property according to extcon typeChanwoo Choi1-1/+200
This patch support the extcon property for the external connector because each external connector might have the property according to the H/W design and the specific characteristics. - EXTCON_PROP_USB_[property name] - EXTCON_PROP_CHG_[property name] - EXTCON_PROP_JACK_[property name] - EXTCON_PROP_DISP_[property name] Add the new extcon APIs to get/set the property value as following: - int extcon_get_property(struct extcon_dev *edev, unsigned int id, unsigned int prop, union extcon_property_value *prop_val) - int extcon_set_property(struct extcon_dev *edev, unsigned int id, unsigned int prop, union extcon_property_value prop_val) Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Chris Zhong <zyw@rock-chips.com> Tested-by: Guenter Roeck <groeck@chromium.org> Reviewed-by: Guenter Roeck <groeck@chromium.org>
2016-08-08extcon: Add the extcon_type to gather each connector into five categoryChanwoo Choi1-29/+130
This patch adds the new extcon type to group the each connecotr into following five category. This type would be used to handle the connectors as a group unit instead of a connector unit. - EXTCON_TYPE_USB : USB connector - EXTCON_TYPE_CHG : Charger connector - EXTCON_TYPE_JACK : Jack connector - EXTCON_TYPE_DISP : Display connector - EXTCON_TYPE_MISC : Miscellaneous connector Also, each external connector is possible to belong to one more extcon type. In caes of EXTCON_CHG_USB_SDP, it have the EXTCON_TYPE_CHG and EXTCON_TYPE_USB. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Chris Zhong <zyw@rock-chips.com> Tested-by: Guenter Roeck <groeck@chromium.org> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Reviewed-by: Guenter Roeck <groeck@chromium.org>
2016-08-08extcon: Fix compile time warningManinder Singh1-1/+1
This patch fixes below compilation warning:- drivers/extcon/extcon.c: In function extcon_register_notifier: drivers/extcon/extcon.c:455:6: warning: idx may be used uninitialized in this function [-Wmaybe-uninitialized] if (idx >= 0) { Signed-off-by: Vaneet Narang <v.narang@samsung.com> Signed-off-by: Maninder Singh <maninder1.s@samsung.com> [cw00.choi : Modify the patch title using the a captical letter for first char] Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2016-08-08extcon: Block the bit masking operation for cable state except for extcon coreChanwoo Choi1-19/+1
This patch restrict the usage of extcon_update_state() in the extcon core because the extcon_update_state() use the bit masking to change the state of external connector. When this function is used in device drivers, it may occur the probelm with the handling mistake of bit masking. Also, this patch removes the extcon_get/set_state() functions because these functions use the bit masking which is reluctant way. Instead, extcon provides the extcon_set/get_cable_state_() functions. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2016-08-08extcon: Remove the state_store() to prevent the wrong accessChanwoo Choi1-20/+1
This patch removes the state_store() which change the state of external connectors with bit masking on user-space. It is wrong access to modify the change the state of external connectors. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2016-08-08extcon: Move extcon_get_edev_by_phandle() errors to dbg levelStephen Boyd1-2/+2
Sometimes drivers may call this API and expect it to fail because the extcon they're looking for is optional. Let's move these prints to debug level so it doesn't look like there's a problem when there isn't one. Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2016-07-02extcon: add missing of_node_put after calling of_parse_phandlePeter Chen1-0/+2
of_node_put needs to be called when the device node which is got from of_parse_phandle has finished using. Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2016-06-27extcon: Split out the resource-managed functions from extcon coreChanwoo Choi1-117/+0
This patch split out the resource-managed related functions from extcon core driver. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2016-06-27extcon: Move struct extcon_cable from header file to coreChanwoo Choi1-0/+20
This patch moves the struct extcon_cable because that should be only handled by extcon core. There are no reason to publish the internal structure. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2016-06-23extcon: Check for incorrect connection type in notifier registerStephen Boyd1-0/+4
If we call extcon_register_notifier() with the wrong cable type, it blows up with an oops instead of returning an error code. Let's be nice and fail gracefully given that the consumer might not know if the cable is supported by the extcon provider. Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2016-06-10extcon: Remove the deprecated extcon functionsChanwoo Choi1-177/+24
This patch removes the deprecated extcon functions using string type to identify the type of external connector. The Commit 2a9de9c0f08d61 ("extcon: Use the unique id for external connector instead of string) uses the unique id to separate the type of external connector instead of string name. - extcon_register_interest() - extcon_unregister_interest() - extcon_set_cable_state() - extcon_get_cable_state() And, extcon_register_interest() finds the first extcon device to include the requested external connector from extcon client device and then register the notifier if extcon device argument is NULL. Instead, extcon_register_notifier() supports this feature. But, this patch remains the deprecatd function definition to prevent the build break. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2015-10-16extcon: Modify the id and name of external connectorChanwoo Choi1-29/+32
This patch modifies the id and name of external connector with the additional prefix to clarify both attribute and meaning of external connector as following: - EXTCON_CHG_* mean the charger connector. - EXTCON_JACK_* mean the jack connector. - EXTCON_DISP_* mean the display port connector. Following table show the new name of external connector with old name: -------------------------------------------------- Old extcon name | New extcon name | -------------------------------------------------- EXTCON_TA | EXTCON_CHG_USB_DCP | EXTCON_CHARGE_DOWNSTREAM| EXTCON_CHG_USB_CDP | EXTCON_FAST_CHARGER | EXTCON_CHG_USB_FAST | EXTCON_SLOW_CHARGER | EXTCON_CHG_USB_SLOW | -------------------------------------------------- EXTCON_MICROPHONE | EXTCON_JACK_MICROPHONE | EXTCON_HEADPHONE | EXTCON_JACK_HEADPHONE | EXTCON_LINE_IN | EXTCON_JACK_LINE_IN | EXTCON_LINE_OUT | EXTCON_JACK_LINE_OUT | EXTCON_VIDEO_IN | EXTCON_JACK_VIDEO_IN | EXTCON_VIDEO_OUT | EXTCON_JACK_VIDEO_OUT | EXTCON_SPDIF_IN | EXTCON_JACK_SPDIF_IN | EXTCON_SPDIF_OUT | EXTCON_JACK_SPDIF_OUT | -------------------------------------------------- EXTCON_HMDI | EXTCON_DISP_HDMI | EXTCON_MHL | EXTCON_DISP_MHL | EXTCON_DVI | EXTCON_DISP_DVI | EXTCON_VGA | EXTCON_DISP_VGA | -------------------------------------------------- And, when altering the name of USB charger connector, EXTCON refers to the "Battery Charging v1.2 Spec and Adopters Agreement"[1] to use the standard name of USB charging port as following. Following name of USB charging port are already used in power_supply subsystem. We chan check it on patch[2]. - EXTCON_CHG_USB_SDP /* Standard Downstream Port */ - EXTCON_CHG_USB_DCP /* Dedicated Charging Port */ - EXTCON_CHG_USB_CDP /* Charging Downstream Port */ - EXTCON_CHG_USB_ACA /* Accessory Charger Adapter */ [1] www.usb.org/developers/docs/devclass_docs/BCv1.2_070312.zip [2] commit 85efc8a18ced ("power_supply: Add types for USB chargers") Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> [ckeepax: For the Arizona changes] Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Reviewed-by: Roger Quadros <rogerq@ti.com>
2015-09-21extcon: Fix attached value returned by is_extcon_changedHans de Goede1-1/+1
is_extcon_changed should only check the idx-th bit of new, not the entirety of new when setting attached. This fixes extcon sending notifications that a cable was inserted when it gets removed while another cable is still connected. Cc: stable@vger.kernel.org Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2015-08-10extcon: Fix signedness bugs about break error handlingDan Carpenter1-4/+4
Unsigned is never less than zero so this error handling won't work. Fixes: be052cc87745 ('extcon: Fix hang and extcon_get/set_cable_state().') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Roger Quadros <rogerq@ti.com> [cw00.choi: Change the patch title and fix signedness bug of find_cable_index_by_id() ] Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2015-08-10extcon: Add exception handling to prevent the NULL pointer accessChanwoo Choi1-1/+31
This patch check whether argument is NULL to prevent NULL pointer access. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2015-08-10extcon: Remove optional print_state() function pointer of struct extcon_devChanwoo Choi1-8/+0
This patch removes the optional print_state() function pointer which included in 'struct extcon_dev' because the extcon must maintain the consistent name of extcon device on sysfs instead of inconsistent state of external connectors. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2015-07-31extcon: Fix extcon_cable_get_state() from getting old state after notificationRoger Quadros1-5/+10
Currently the extcon code notifiers the interested listeners before it updates the extcon state with the new state. This will cause the listeners that use extcon_cable_get_state() to get the stale state and loose the new state. Fix this by first changing the extcon state variable and then notifying listeners. Signed-off-by: Roger Quadros <rogerq@ti.com> Tested-by: Ivan T. Ivanov <ivan.ivanov@linaro.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2015-07-31extcon: Fix hang and extcon_get/set_cable_state().Roger Quadros1-12/+34
Users of find_cable_index_by_name() will cause a kernel hang as the while loop counter is never incremented and end condition is never reached. extcon_get_cable_state() and extcon_set_cable_state() are broken because they use cable index instead of cable id. This causes the first cable state (cable.0) to be always invalid in sysfs or extcon_get_cable_state() users. Introduce a new function find_cable_id_by_name() that fixes both of the above issues. Fixes: commit 73b6ecdb93e8 ("extcon: Redefine the unique id of supported external connectors without 'enum extcon' type") Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Roger Quadros <rogerq@ti.com> Tested-by: Ivan T. Ivanov <ivan.ivanov@linaro.org> [cw00.choi: Fix minor coding style] Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2015-06-13extcon: Redefine the unique id of supported external connectors without ↵Chanwoo Choi1-12/+12
'enum extcon' type This patch just redefine the unique id of supported external connectors without 'enum extcon' type. Because unique id would be used on devictree file(*.dts) to indicate the specific external connectors like key number of input framework. So, I have the plan to move this definitions to following header file which includes the unique id of supported external connectors. - include/dt-bindings/extcon/extcon.h Fixes: 2a9de9c0f08d ("extcon: Use the unique id for external connector instead of string") Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-29extcon: Remove optional print_name() function pointer of extcon_devChanwoo Choi1-8/+0
This patch removes the optional print_name() function pointer included in 'struct extcon_dev' because the extcon must maintain the consistent name of extcon device on sysfs instead of inconsistent name. After merged patch[1], extcon can maintain the consistent name of extcon device without any hard-coded device name. [1] https://lkml.org/lkml/2015/4/27/258 Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2015-05-22extcon: Update the prototype of extcon_register_notifier() with enum extconChanwoo Choi1-43/+48
Previously, extcon consumer driver used the extcon_register_interest() to register the notifier chain and then to receive the notifier event when external connector's state is changed. When registering the notifier chain for specific external connector with extcon_register_interest(), it used the the string name of external connector directly. There are potential problem because of unclear, non-standard and inconsequent cable name. Namely, it is not appropriate method to identify each external connector. So, this patch modify the prototype of extcon_register_notifier() by using the 'enum extcon' which are the unique id for each external connector instead of unclear string method. - Previously, the extcon consumer driver used the extcon_register_interest() with 'cable_name' to point out the specific external connector. Also. it used the un-needed structure (struct extcon_specific_cable_nb). : int extcon_register_interest(struct extcon_specific_cable_nb *obj, const char *extcon_name, const char *cable_name, struct notifier_block *nb) - Newly, the updated extcon_register_notifier() would definitely support the same feature to detech the changed state of external connector without any specific structure (struct extcon_specific_cable_nb). : int extcon_register_notifier(struct extcon_dev *edev, enum extcon id, struct notifier_block *nb) This patch support the both extcon_register_interest() and new extcon_register_ notifier(). But the extcon_{register|unregister}_interest() will be deprecated because extcon core would support the notifier event for extcon consumer driver with only updated extcon_register_notifier() and 'extcon_specific_cable_nb' will be removed if there are no extcon consumer driver with legacy extcon_{register|unregister}_interest(). Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2015-05-22extcon: Use capital letter for the name of external connectorsChanwoo Choi1-14/+23
This patch uses the capital letter for the name of external connectors to improve the readability instead of small letter. Cc: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2015-05-22extcon: Use the unique id for external connector instead of stringChanwoo Choi1-72/+91
This patch uses the unique id to identify the type of external connector instead of string name. The string name have the many potential issues. So, this patch defines the 'extcon' enumeration which includes all supported external connector on EXTCON subsystem. If new external connector is necessary, the unique id of new connector have to be added in 'extcon' enumeration. There are current supported external connector in 'enum extcon' as following: enum extcon { EXTCON_NONE = 0x0, /* USB external connector */ EXTCON_USB = 0x1, EXTCON_USB_HOST = 0x2, /* Charger external connector */ EXTCON_TA = 0x10, EXTCON_FAST_CHARGER = 0x11, EXTCON_SLOW_CHARGER = 0x12, EXTCON_CHARGE_DOWNSTREAM = 0x13, /* Audio and video external connector */ EXTCON_LINE_IN = 0x20, EXTCON_LINE_OUT = 0x21, EXTCON_MICROPHONE = 0x22, EXTCON_HEADPHONE = 0x23, EXTCON_HDMI = 0x30, EXTCON_MHL = 0x31, EXTCON_DVI = 0x32, EXTCON_VGA = 0x33, EXTCON_SPDIF_IN = 0x34, EXTCON_SPDIF_OUT = 0x35, EXTCON_VIDEO_IN = 0x36, EXTCON_VIDEO_OUT = 0x37, /* Miscellaneous external connector */ EXTCON_DOCK = 0x50, EXTCON_JIG = 0x51, EXTCON_MECHANICAL = 0x52, EXTCON_END, }; For example in extcon-arizona.c: To use unique id removes the potential issue about handling the inconsistent name of external connector with string. - Previously, use the string to register the type of arizona jack connector static const char *arizona_cable[] = { "Mechanical", "Microphone", "Headphone", "Line-out", }; - Newly, use the unique id to register the type of arizona jack connector static const enum extcon arizona_cable[] = { EXTCON_MECHANICAL, EXTCON_MICROPHONE, EXTCON_HEADPHONE, EXTCON_LINE_OUT, EXTCON_NONE, }; And this patch modify the prototype of extcon_{get|set}_cable_state_() which uses the 'enum extcon id' instead of 'cable_index'. Because although one more extcon drivers support USB cable, each extcon driver might has the differnt 'cable_index' for USB cable. All extcon drivers can use the unique id number for same external connector with modified extcon_{get|set}_cable_state_(). - Previously, use 'cable_index' on these functions: extcon_get_cable_state_(struct extcon_dev*, int cable_index) extcon_set_cable_state_(struct extcon_dev*, int cable_index, bool state) -Newly, use 'enum extcon id' on these functions: extcon_get_cable_state_(struct extcon_dev*, enum extcon id) extcon_set_cable_state_(struct extcon_dev*, enum extcon id, bool state) Cc: Arnd Bergmann <arnd@arndb.de> Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Roger Quadros <rogerq@ti.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Acked-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> [arnd: Report the build break about drivers/usb/phy/phy-tahvo.c after using the unique id for external connector insteadf of string] Reported-by: Arnd Bergmann <arnd@arndb.de> [dan.carpenter: Report the build warning of extcon_{set|get}_cable_state_()] Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
2015-05-19extcon: Fix the checkpatch warning and minor coding style issueChanwoo Choi1-5/+5
This patch clean up the extcon core driver by fixing the checkpatch warning and minor coding style issue. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-31 01:48:29 +0300