| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull intel EDAC fixes from Tony Luck:
- Old igen6 driver could lose pending events during initialization
- Sapphire Rapids workstations have fewer memory controllers than their
bigger siblings. This confused the driver.
* tag 'edac_updates_for_v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/igen6: Fix the issue of no error events
EDAC/i10nm: Skip the absent memory controllers
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree include cleanups from Rob Herring:
"These are the remaining few clean-ups of DT related includes which
didn't get applied to subsystem trees"
* tag 'devicetree-header-cleanups-for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
ipmi: Explicitly include correct DT includes
tpm: Explicitly include correct DT includes
lib/genalloc: Explicitly include correct DT includes
parport: Explicitly include correct DT includes
sbus: Explicitly include correct DT includes
mux: Explicitly include correct DT includes
macintosh: Explicitly include correct DT includes
hte: Explicitly include correct DT includes
EDAC: Explicitly include correct DT includes
clocksource: Explicitly include correct DT includes
sparc: Explicitly include correct DT includes
riscv: Explicitly include correct DT includes
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf event updates from Ingo Molnar:
- AMD IBS improvements
- Intel PMU driver updates
- Extend core perf facilities & the ARM PMU driver to better handle ARM big.LITTLE events
- Micro-optimize software events and the ring-buffer code
- Misc cleanups & fixes
* tag 'perf-core-2023-08-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/uncore: Remove unnecessary ?: operator around pcibios_err_to_errno() call
perf/x86/intel: Add Crestmont PMU
x86/cpu: Update Hybrids
x86/cpu: Fix Crestmont uarch
x86/cpu: Fix Gracemont uarch
perf: Remove unused extern declaration arch_perf_get_page_size()
perf: Remove unused PERF_PMU_CAP_HETEROGENEOUS_CPUS capability
arm_pmu: Remove unused PERF_PMU_CAP_HETEROGENEOUS_CPUS capability
perf/x86: Remove unused PERF_PMU_CAP_HETEROGENEOUS_CPUS capability
arm_pmu: Add PERF_PMU_CAP_EXTENDED_HW_TYPE capability
perf/x86/ibs: Set mem_lvl_num, mem_remote and mem_hops for data_src
perf/mem: Add PERF_MEM_LVLNUM_NA to PERF_MEM_NA
perf/mem: Introduce PERF_MEM_LVLNUM_UNC
perf/ring_buffer: Use local_try_cmpxchg in __perf_output_begin
locking/arch: Avoid variable shadowing in local_try_cmpxchg()
perf/core: Use local64_try_cmpxchg in perf_swevent_set_period
perf/x86: Use local64_try_cmpxchg
perf/amd: Prevent grouping of IBS events
|
|
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it was merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.
Link: https://lore.kernel.org/r/20230714174434.4054728-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Add support for family 1Ah-based models 00h-1Fh and 40h-4Fh.
[ bp: Simplify. ]
Signed-off-by: Avadhut Naik <Avadhut.Naik@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230809035244.2722455-4-avadhut.naik@amd.com
|
|
Sierra Forest and Grand Ridge are both E-core only using Crestmont
micro-architecture, They fit the pre-existing naming scheme prefectly
fine, adhere to it.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230807150405.757666627@infradead.org
|
|
Current igen6_edac checks for pending errors before the registration
of the error handler. However, there is a possibility that the error
occurs during the registration process, leading to unhandled pending
errors and no future error events. This issue can be reproduced by
repeatedly injecting errors during the loading of the igen6_edac.
Fix this issue by moving the pending error handler after the registration
of the error handler, ensuring that no pending errors are left unhandled.
Fixes: 10590a9d4f23 ("EDAC/igen6: Add EDAC driver for Intel client SoCs using IBECC")
Reported-by: Ee Wey Lim <ee.wey.lim@intel.com>
Tested-by: Ee Wey Lim <ee.wey.lim@intel.com>
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/r/20230725080427.23883-1-qiuxu.zhuo@intel.com
|
|
Some Sapphire Rapids workstations' absent memory controllers
still appear as PCIe devices that fool the i10nm_edac driver
and result in "shift exponent -66 is negative" call traces
from skx_get_dimm_info().
Skip the absent memory controllers to avoid the call traces.
Reported-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Closes: https://lore.kernel.org/linux-edac/CAAd53p41Ku1m1rapeqb1xtD+kKuk+BaUW=dumuoF0ZO3GhFjFA@mail.gmail.com/T/#m5de16dce60a8c836ec235868c7c16e3fefad0cc2
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reported-by: Koba Ko <koba.ko@canonical.com>
Closes: https://lore.kernel.org/linux-edac/SA1PR11MB71305B71CCCC3D9305835202892AA@SA1PR11MB7130.namprd11.prod.outlook.com/T/#t
Tested-by: Koba Ko <koba.ko@canonical.com>
Fixes: d4dc89d069aa ("EDAC, i10nm: Add a driver for Intel 10nm server processors")
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/r/20230710013232.59712-1-qiuxu.zhuo@intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RAS updates from Borislav Petkov:
- Add initial support for RAS hardware found on AMD server GPUs (MI200).
Those GPUs and CPUs are connected together through the coherent
fabric and the GPU memory controllers report errors through x86's MCA
so EDAC needs to support them. The amd64_edac driver supports now HBM
(High Bandwidth Memory) and thus such heterogeneous memory controller
systems
- Other small cleanups and improvements
* tag 'ras_core_for_v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
EDAC/amd64: Cache and use GPU node map
EDAC/amd64: Add support for AMD heterogeneous Family 19h Model 30h-3Fh
EDAC/amd64: Document heterogeneous system enumeration
x86/MCE/AMD, EDAC/mce_amd: Decode UMC_V2 ECC errors
x86/amd_nb: Re-sort and re-indent PCI defines
x86/amd_nb: Add MI200 PCI IDs
ras/debugfs: Fix error checking for debugfs_create_dir()
x86/MCE: Check a hw error's address to determine proper recovery action
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC updates from Borislav Petkov:
- amd64_edac: Add support for Zen4 client hardware
- amd64_edac: Remove the version string as it is useless and actively
confusing when looking at backported versions of the driver
- Add a driver for the Nuvoton NPCM memory controller
- A debugfs error checking cleanup
* tag 'edac_updates_for_v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/npcm: Add NPCM memory controller driver
dt-bindings: memory-controllers: nuvoton: Add NPCM memory controller
EDAC/thunderx: Check debugfs file creation retval properly
EDAC/amd64: Add support for ECC on family 19h model 60h-7Fh
EDAC/amd64: Remove module version string
|
|
AMD systems have historically provided an "AMD Node ID" that is a unique
identifier for each die in a multi-die package. This was associated with
a unique instance of the AMD Northbridge on a legacy system. And now it
is associated with a unique instance of the AMD Data Fabric on modern
systems. Each instance is referred to as a "Node"; this is an
AMD-specific term not to be confused with NUMA nodes.
The data fabric provides a number of interfaces accessible through a set
of functions in a single PCI device. There is one PCI device per Data
Fabric (AMD Node), and multi-die systems will see multiple such PCI
devices. The AMD Node ID matches a Node's position in the PCI hierarchy.
For example, the Node 0 is accessed using the first PCI device, Node 1
is accessed using the second, and so on. A logical CPU can find its AMD
Node ID using CPUID. Furthermore, the AMD Node ID is used within the
hardware fabric, so it is not purely a logical value.
Heterogeneous AMD systems, with a CPU Data Fabric connected to GPU data
fabrics, follow a similar convention. Each CPU and GPU die has a unique
AMD Node ID value, and each Node ID corresponds to PCI devices in
sequential order.
However, there are two caveats:
1) GPUs are not x86, and they don't have CPUID to read their AMD Node ID
like on CPUs. This means the value is more implicit and based on PCI
enumeration and hardware-specifics.
2) There is a gap in the hardware values for AMD Node IDs. Values 0-7
are for CPUs and values 8-15 are for GPUs.
For example, a system with one CPU die and two GPUs dies will have the
following values:
CPU0 -> AMD Node 0
GPU0 -> AMD Node 8
GPU1 -> AMD Node 9
EDAC is the only subsystem where this has a practical effect. Memory
errors on AMD systems are commonly reported through MCA to a CPU on the
local AMD Node. The error information is passed along to EDAC where the
AMD EDAC modules use the AMD Node ID of reporting logical CPU to access
AMD Node information.
However, memory errors from a GPU die will be reported to the CPU die.
Therefore, the logical CPU's AMD Node ID can't be used since it won't
match the AMD Node ID of the GPU die. The AMD Node ID of the GPU die is
provided as part of the MCA information, and the value will match the
hardware enumeration (e.g. 8-15).
Handle this situation by discovering GPU dies the same way as CPU dies
in the AMD NB code. But do a "node id" fixup in AMD64 EDAC where it's
needed.
The GPU data fabrics provide a register with the base AMD Node ID for
their local "type", i.e. GPU data fabric. This value is the same for all
fabrics of the same type in a system.
Read and cache the base AMD Node ID from one of the GPU devices during
module initialization. Use this to fixup the "node id" when reporting
memory errors at runtime.
[ bp: Squash a fix making gpu_node_map static as reported by
Tom Rix <trix@redhat.com>.
Link: https://lore.kernel.org/r/20230610210930.174074-1-trix@redhat.com ]
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Co-developed-by: Muralidhara M K <muralidhara.mk@amd.com>
Signed-off-by: Muralidhara M K <muralidhara.mk@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230515113537.1052146-6-muralimk@amd.com
|
|
* ras/edac-drivers:
EDAC/npcm: Add NPCM memory controller driver
dt-bindings: memory-controllers: nuvoton: Add NPCM memory controller
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
|
|
Add driver for memory controller present on Nuvoton NPCM SoCs. The
memory controller supports single bit error correction and double bit
error detection.
Signed-off-by: Marvin Lin <milkfafa@gmail.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230111093245.318745-4-milkfafa@gmail.com
|
|
* ras/edac-misc:
EDAC/thunderx: Check debugfs file creation retval properly
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
|
|
edac_debugfs_create_file() returns ERR_PTR by way of the respective
debugfs function it calls, if an error occurs.
The appropriate way to verify for errors is to use IS_ERR(). Do so.
[ bp: Rewrite all text. ]
Signed-off-by: Yeqi Fu <asuk4.q@gmail.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230517173111.365787-1-asuk4.q@gmail.com
|
|
AMD Family 19h Model 30h-3Fh systems can be connected to AMD MI200
accelerator/GPU devices such that the CPU and GPU data fabrics are
connected together. In this configuration, the CPU manages error logging
and reporting for MCA banks located on the GPUs. This includes HBM memory
errors reported from Unified Memory Controllers (UMCs) on the GPUs.
The GPU memory errors are handled like CPU memory errors.
AMD CPU UMC support in EDAC can be re-used for GPU UMC support. However,
keeping them separate means drastic changes in one path (e.g. to support
newer products) should have less impact on the other path.
Also, simplify the "gpu_" helper functions where possible. GPU product
configuration, like memory type and channel count, is fixed compared to
CPU products.
GPU UMCs each have four physical connections (phys) connected to eight
channels. There is a single "chip select". This differs from CPUs where
each UMC has one physical connection connected to one channel, and each
channel has up to four "chip selects".
Enumerate each UMC "phy" as an EDAC CSROW, since there is only a single
chip select for each physical connection. This is similar to how a CPU
UMC "phy" is enumerated as an EDAC CHANNEL, since there is only a single
channel for each physical connection.
Signed-off-by: Muralidhara M K <muralidhara.mk@amd.com>
Co-developed-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com>
Signed-off-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com>
Co-developed-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230515113537.1052146-5-muralimk@amd.com
|
|
The MI200 (Aldebaran) series of devices introduced a new SMCA bank type
for Unified Memory Controllers. The MCE subsystem already has support
for this new type. The MCE decoder module will decode the common MCA
error information for the new bank type, but it will not pass the
information to the AMD64 EDAC module for detailed memory error decoding.
Have the MCE decoder module recognize the new bank type as an SMCA UMC
memory error and pass the MCA information to AMD64 EDAC.
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Co-developed-by: Muralidhara M K <muralidhara.mk@amd.com>
Signed-off-by: Muralidhara M K <muralidhara.mk@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230515113537.1052146-3-muralimk@amd.com
|
|
The LLCC EDAC register offsets varies between each SoC. Hardcoding the
register offsets won't work and will often result in crash due to
accessing the wrong locations.
Hence, get the register offsets from the LLCC driver matching the
individual SoCs.
Cc: <stable@vger.kernel.org> # 6.0: 5365cea199c7 ("soc: qcom: llcc: Rename reg_offset structs to reflect LLCC version")
Cc: <stable@vger.kernel.org> # 6.0: c13d7d261e36 ("soc: qcom: llcc: Pass LLCC version based register offsets to EDAC driver")
Cc: <stable@vger.kernel.org> # 6.0
Fixes: a6e9d7ef252c ("soc: qcom: llcc: Add configuration data for SM8450 SoC")
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230517114635.76358-3-manivannan.sadhasivam@linaro.org
|
|
qcom_llcc_core_setup()
"ret" variable will be assigned on both success and failure cases. So there
is no need to initialize it during start of qcom_llcc_core_setup().
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230517114635.76358-2-manivannan.sadhasivam@linaro.org
|
|
Ryzen 9 7950X uses model 61h. Treat it as Epyc 9004, but with 2 channels
instead of 12.
With two 32GB dual-rank DIMMs the sizes appear to be reported correctly:
EDAC MC0: Giving out device to module amd64_edac controller F19h_M60h: DEV 0000:00:18.3 (INTERRUPT)
EDAC amd64: F19h_M60h detected (node 0).
EDAC MC: UMC0 chip selects:
EDAC amd64: MC: 0: 0MB 1: 0MB
EDAC amd64: MC: 2: 16384MB 3: 16384MB
EDAC MC: UMC1 chip selects:
EDAC amd64: MC: 0: 0MB 1: 0MB
EDAC amd64: MC: 2: 16384MB 3: 16384MB
AMD64 EDAC driver v3.5.0
ECC errors can also be detected:
mce: [Hardware Error]: Machine check events logged
[Hardware Error]: Corrected error, no action required.
[Hardware Error]: CPU:0 (19:61:2) MC21_STATUS[Over|CE|MiscV|AddrV|-|-|SyndV|CECC|-|-|-]: 0xdc2040000400011b
[Hardware Error]: Error Addr: 0x00000007ff7e93c0
[Hardware Error]: IPID: 0x0000009600050f00, Syndrome: 0x000100010a801203
[Hardware Error]: Unified Memory Controller Ext. Error Code: 0, DRAM ECC error.
EDAC MC0: 1 CE Cannot decode normalized address on mc#0csrow#3channel#0 (csrow:3 channel:0 page:0x0 offset:0x0 grain:64 syndrome:0x1)
[Hardware Error]: cache level: L3/GEN, tx: GEN, mem-tx: RD
According to Mario Limonciello, the same code should also work for
models 70h-7Fh (follow thread in Link).
[ bp: Massage, the translation logic updates are pending. ]
Signed-off-by: Hristo Venev <hristo@venev.name>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20230425201239.324476-1-hristo@venev.name
Link: https://lore.kernel.org/r/20230511174506.875153-2-hristo@venev.name
|
|
The AMD64 EDAC module version information is not exposed through ABI
like MODULE_VERSION(). Instead it is printed during module init.
Version numbers can be confusing in cases where module updates are
partly backported resulting in a difference between upstream and
backported module versions.
Remove the AMD64 EDAC module version information to avoid user
confusion.
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230410190959.3367528-1-yazen.ghannam@amd.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the large set of driver core changes for 6.4-rc1.
Once again, a busy development cycle, with lots of changes happening
in the driver core in the quest to be able to move "struct bus" and
"struct class" into read-only memory, a task now complete with these
changes.
This will make the future rust interactions with the driver core more
"provably correct" as well as providing more obvious lifetime rules
for all busses and classes in the kernel.
The changes required for this did touch many individual classes and
busses as many callbacks were changed to take const * parameters
instead. All of these changes have been submitted to the various
subsystem maintainers, giving them plenty of time to review, and most
of them actually did so.
Other than those changes, included in here are a small set of other
things:
- kobject logging improvements
- cacheinfo improvements and updates
- obligatory fw_devlink updates and fixes
- documentation updates
- device property cleanups and const * changes
- firwmare loader dependency fixes.
All of these have been in linux-next for a while with no reported
problems"
* tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (120 commits)
device property: make device_property functions take const device *
driver core: update comments in device_rename()
driver core: Don't require dynamic_debug for initcall_debug probe timing
firmware_loader: rework crypto dependencies
firmware_loader: Strip off \n from customized path
zram: fix up permission for the hot_add sysfs file
cacheinfo: Add use_arch[|_cache]_info field/function
arch_topology: Remove early cacheinfo error message if -ENOENT
cacheinfo: Check cache properties are present in DT
cacheinfo: Check sib_leaf in cache_leaves_are_shared()
cacheinfo: Allow early level detection when DT/ACPI info is missing/broken
cacheinfo: Add arm64 early level initializer implementation
cacheinfo: Add arch specific early level initializer
tty: make tty_class a static const structure
driver core: class: remove struct class_interface * from callbacks
driver core: class: mark the struct class in struct class_interface constant
driver core: class: make class_register() take a const *
driver core: class: mark class_release() as taking a const *
driver core: remove incorrect comment for device_create*
MIPS: vpe-cmp: remove module owner pointer from struct class usage.
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"The most notable updates this time are for Qualcomm Snapdragon
platforms. The Inline-Crypto-Engine gets a new DT binding and driver,
and a number of drivers now support additional Snapdragon variants, in
particular the rsc, scm, geni, bwm, glink and socinfo, while the llcc
(edac) and rpm drivers get notable functionality updates.
Updates on other platforms include:
- Various updates to the Mediatek mutex and mmsys drivers, including
support for the Helio X10 SoC
- Support for unidirectional mailbox channels in Arm SCMI firmware
- Support for per cpu asynchronous notification in OP-TEE firmware
- Minor updates for memory controller drivers.
- Minor updates for Renesas, TI, Amlogic, Apple, Broadcom, Tegra,
Allwinner, Versatile Express, Canaan, Microchip, Mediatek and i.MX
SoC drivers, mainly updating the use of MODULE_LICENSE() macros and
obsolete DT driver interfaces"
* tag 'soc-drivers-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (165 commits)
soc: ti: smartreflex: Simplify getting the opam_sr pointer
bus: vexpress-config: Add explicit of_platform.h include
soc: mediatek: Kconfig: Add MTK_CMDQ dependency to MTK_MMSYS
memory: mtk-smi: mt8365: Add SMI Support
dt-bindings: memory-controllers: mediatek,smi-larb: add mt8365
dt-bindings: memory-controllers: mediatek,smi-common: add mt8365
memory: tegra: read values from correct device
dt-bindings: crypto: Add Qualcomm Inline Crypto Engine
soc: qcom: Make the Qualcomm UFS/SDCC ICE a dedicated driver
dt-bindings: firmware: document Qualcomm QCM2290 SCM
soc: qcom: rpmh-rsc: Support RSC v3 minor versions
soc: qcom: smd-rpm: Use GFP_ATOMIC in write path
soc/tegra: fuse: Remove nvmem root only access
soc/tegra: cbb: tegra194: Use of_address_count() helper
soc/tegra: cbb: Remove MODULE_LICENSE in non-modules
ARM: tegra: Remove MODULE_LICENSE in non-modules
soc/tegra: flowctrl: Use devm_platform_get_and_ioremap_resource()
soc: tegra: cbb: Drop empty platform remove function
firmware: arm_scmi: Add support for unidirectional mailbox channels
dt-bindings: firmware: arm,scmi: Support mailboxes unidirectional channels
...
|
|
Combine all queued EDAC changes for submission into v6.4:
* ras/edac-drivers:
EDAC/i10nm: Add Intel Sierra Forest server support
EDAC/skx: Fix overflows on the DRAM row address mapping arrays
* ras/edac-amd64: (27 commits)
EDAC/amd64: Fix indentation in umc_determine_edac_cap()
EDAC/amd64: Add get_err_info() to pvt->ops
EDAC/amd64: Split dump_misc_regs() into dct/umc functions
EDAC/amd64: Split init_csrows() into dct/umc functions
EDAC/amd64: Split determine_edac_cap() into dct/umc functions
EDAC/amd64: Rename f17h_determine_edac_ctl_cap()
EDAC/amd64: Split setup_mci_misc_attrs() into dct/umc functions
EDAC/amd64: Split ecc_enabled() into dct/umc functions
EDAC/amd64: Split read_mc_regs() into dct/umc functions
EDAC/amd64: Split determine_memory_type() into dct/umc functions
EDAC/amd64: Split read_base_mask() into dct/umc functions
EDAC/amd64: Split prep_chip_selects() into dct/umc functions
EDAC/amd64: Rework hw_info_{get,put}
EDAC/amd64: Merge struct amd64_family_type into struct amd64_pvt
EDAC/amd64: Do not discover ECC symbol size for Family 17h and later
EDAC/amd64: Drop dbam_to_cs() for Family 17h and later
EDAC/amd64: Split get_csrow_nr_pages() into dct/umc functions
EDAC/amd64: Rename debug_display_dimm_sizes()
* ras/edac-misc:
EDAC/altera: Remove MODULE_LICENSE in non-module
EDAC: Sanitize MODULE_AUTHOR strings
EDAC/amd81[13]1: Remove trailing newline from MODULE_AUTHOR
EDAC/i5100: Fix typo in comment
EDAC/altera: Remove redundant error logging
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
|
|
The Sierra Forest CPU model uses similar memory controller registers as
Granite Rapids server. Add Sierra Forest CPU model ID for EDAC support.
Tested-by: Li Zhang <li4.zhang@intel.com>
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/r/20230410131531.11914-1-qiuxu.zhuo@intel.com
|
|
Use consistent indentation to improve the readability and fix:
drivers/edac/amd64_edac.c:1279 umc_determine_edac_cap() warn: inconsistent indenting
Fixes: f6a4b4a1aa16 ("EDAC/amd64: Split determine_edac_cap() into dct/umc functions")
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230404022557.46409-1-yang.lee@linux.alibaba.com
|
|
Since
8b41fc4454e3 ("kbuild: create modules.builtin without Makefile.modbuiltin or tristate.conf"),
MODULE_LICENSE declarations are used to identify modules. As
a consequence, uses of the macro in non-modules will cause modprobe to
misidentify their containing object file as a module when it is not
(false positives), and modprobe might succeed rather than failing with
a suitable error message.
altera_edac is not a module for a while now, remove the macro call.
Suggested-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Nick Alcock <nick.alcock@oracle.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230217141059.392471-24-nick.alcock@oracle.com
|
|
Fixup the remaining MODULE_AUTHOR strings to not contain newlines.
Shorten and unbreak others.
No functional changes.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230328134309.23159-1-bp@alien8.de
|
|
MODULE_AUTHOR strings don't usually include a newline character.
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230129165054.1675554-1-j.neuschaefer@gmx.net
|
|
GPU Nodes will use a different method to determine the chip select
and channel of an error. A function pointer should be used rather than
introduce another branching condition.
Prepare for this by adding get_err_info() to pvt->ops. This function is
only called from the modern code path, so a legacy function is not
defined.
Make sure to call this after MCA_STATUS[SyndV] is checked, since the
csrow value is found in MCA_SYND.
[ Yazen: rebased/reworked patch and reworded commit message. ]
Signed-off-by: Muralidhara M K <muralidhara.mk@amd.com>
Co-developed-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com>
Signed-off-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com>
Co-developed-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230127170419.1824692-23-yazen.ghannam@amd.com
|
|
Add a function pointer to pvt->ops.
No functional change is intended.
[ Yazen: Rebased/reworked patch and reworded commit message. ]
Signed-off-by: Muralidhara M K <muralidhara.mk@amd.com>
Co-developed-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com>
Signed-off-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com>
Co-developed-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230127170419.1824692-22-yazen.ghannam@amd.com
|
|
Call them from their respective setup_mci_misc_attrs() paths.
Also, drop the check for an "empty" device, i.e. one without memory.
This is redundant and already done in instance_has_memory() earlier in
the init path.
No functional change is intended.
[ Yazen: rebased/reworked patch and reworded commit message. ]
Signed-off-by: Muralidhara M K <muralidhara.mk@amd.com>
Co-developed-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com>
Signed-off-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com>
Co-developed-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230127170419.1824692-21-yazen.ghannam@amd.com
|
|
Call them from their respective setup_mci_misc_attrs() paths.
No functional change is intended.
[ Yazen: rebased/reworked patch and reworded commit message. ]
Signed-off-by: Muralidhara M K <muralidhara.mk@amd.com>
Co-developed-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com>
Signed-off-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com>
Co-developed-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230127170419.1824692-20-yazen.ghannam@amd.com
|
|
...to match the "umc_" prefix convention.
No functional change is intended.
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230127170419.1824692-19-yazen.ghannam@amd.com
|
|
The init_one_instance() path is shared between legacy and modern
systems. So add the new functions to a function pointer in pvt->ops.
No functional change is intended.
[ Yazen: Rebased/reworked patch and reworded commit message. ]
Signed-off-by: Muralidhara M K <muralidhara.mk@amd.com>
Co-developed-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com>
Signed-off-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com>
Co-developed-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230127170419.1824692-18-yazen.ghannam@amd.com
|
|
Call them using a function pointer in pvt->ops. The "ECC enabled"
check is done outside of the hardware information gathering done in
hw_info_get(). So a high-level function pointer is needed to separate
the legacy and modern paths.
No functional change is intended.
[Yazen: rebased/reworked patch and reworded commit message. ]
Signed-off-by: Muralidhara M K <muralidhara.mk@amd.com>
Co-developed-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com>
Signed-off-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com>
Co-developed-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230127170419.1824692-17-yazen.ghannam@amd.com
|
|
Call them from their respective hw_info_get() paths.
ECC symbol size is not needed on UMC systems, so determine_ecc_sym_sz()
is left out of the UMC path. Do not save TOP_MEM* values on modern
controllers because they're not needed there (read: they were used only
for debugging, if anything).
[ Yazen: rebased/reworked patch and reworded commit message. ]
Signed-off-by: Muralidhara M K <muralidhara.mk@amd.com>
Co-developed-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com>
Signed-off-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com>
Co-developed-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230127170419.1824692-16-yazen.ghannam@amd.com
|
|
Call them from their respective hw_info_get() paths.
Call them after all other hardware registers have been saved, since the
memory type for a device will be determined based on the saved
information.
[ Yazen: rebased/reworked patch and reworded commit message. ]
Signed-off-by: Muralidhara M K <muralidhara.mk@amd.com>
Co-developed-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com>
Signed-off-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com>
Co-developed-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230127170419.1824692-15-yazen.ghannam@amd.com
|
|
Call them from their respective hw_info_get() paths.
Call the new functions after the setting the chip select base and mask
counts, since those are need to read the correct number of chip select
base and mask registers. And call the new functions before the remaining
set up, because the base and mask register values will be needed later.
[Yazen: Rebased/reworked patch and reworded commit message. ]
Signed-off-by: Muralidhara M K <muralidhara.mk@amd.com>
Co-developed-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com>
Signed-off-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com>
Co-developed-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230127170419.1824692-14-yazen.ghannam@amd.com
|
|
Call them from their respective hw_info_get() function. Avoid the
need for family/model-based function pointers.
Add the calls before reading hardware registers from the memory
controllers, since the number of chip select bases and masks needs to be
known first.
[ Yazen: rebased/reworked patch and reworded commit message. ]
Signed-off-by: Muralidhara M K <muralidhara.mk@amd.com>
Co-developed-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com>
Signed-off-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com>
Co-developed-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230127170419.1824692-13-yazen.ghannam@amd.com
|
|
The bulk of system-specific information is gathered at init time with
hw_info_get(). This function calls a number of helper functions, and
many of these helper functions are split between a modern UMC/DF path
and a legacy DCT path.
Split hw_info_get() into legacy and modern versions. This creates two
separate code paths early on, and legacy and modern helper functions can
be called directly in the appropriate code path.
Also, simplify hw_info_put() and share it between legacy and modern
systems. NULL pointer checks are done in pci_dev_put() and kfree(), so
they can be called unconditionally.
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230127170419.1824692-12-yazen.ghannam@amd.com
|
|
Future AMD systems will support heterogeneous "AMD Node" types, e.g.
CPU and GPU types. Therefore, a global family type shared across all
AMD nodes is no longer appropriate.
Move struct low_ops routines and members of struct amd64_family_type
to struct amd64_pvt.
Currently, there are many code branches that split between "modern" and
"legacy" systems. Another code branch will be needed in order to cover
GPU cases. However, rather than introduce another branching case in
multiple functions, the current branching code should be switched to a
set of function pointers. This change makes the code more readable and
simplifies adding support for new families/models.
In order to reuse code, define two sets of function pointers. Use one
for modern systems (Family 17h and later). This will not change between
current CPU families. Use another set of function pointers for legacy
systems (before Family 17h). Use the Family 16h versions as default
for the legacy ops since these are the latest, and adjust the function
pointers as needed for older families.
[ Yazen: rebased/reworked patch and reworded commit message. ]
[ bp: Fix rev8 or later check. ]
Signed-off-by: Muralidhara M K <muralidhara.mk@amd.com>
Co-developed-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com>
Signed-off-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com>
Co-developed-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230127170419.1824692-11-yazen.ghannam@amd.com
|
|
The ECC symbol size was needed on legacy system to lookup the ECC syndrome.
This is not needed on modern systems because the ECC syndrome is explicitly
provided in the MCA information.
Remove the ECC symbol size discovery code for modern UMC-based systems.
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230127170419.1824692-10-yazen.ghannam@amd.com
|
|
The same function is used to calculate chip select size for all Zen-based
family/models. Therefore, a family/model function pointer is not necessary.
Drop the dbam_to_cs() function pointer for Family 17h and later systems.
Also, move the Family 17h function to avoid a forward declaration. Rename
it to indicate that the UMC Address Mask is used rather than the legacy
DBAM value.
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230127170419.1824692-9-yazen.ghannam@amd.com
|
|
Split get_csrow_nr_pages() into a legacy and modern versions in preparation
for further legacy/modern refactoring.
Also, rename f17_get_cs_mode() to match the new convention.
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230127170419.1824692-8-yazen.ghannam@amd.com
|
|
Use the "dct" and "umc" prefixes for legacy and modern versions
respectively.
Also, move the "dct" version to avoid a forward declaration, and fixup
some checkpatch warnings in the process.
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230127170419.1824692-7-yazen.ghannam@amd.com
|
|
Correct typo from 'preform' to 'perform' in comment.
Signed-off-by: Jongwoo Han <jongwooo.han@gmail.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230302021120.56794-1-jongwooo.han@gmail.com
|
|
Direct access to the struct bus_type dev_root pointer is going away soon
so replace that with a call to bus_get_dev_root() instead, which is what
it is there for.
Cc: Borislav Petkov <bp@alien8.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: James Morse <james.morse@arm.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Robert Richter <rric@kernel.org>
Cc: linux-edac@vger.kernel.org
Link: https://lore.kernel.org/r/20230313182918.1312597-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
A call to platform_get_irq() already prints an error on failure within
its own implementation. So printing another error based on its return
value in the caller is redundant and should be removed. The clean up
also makes if condition block braces unnecessary. Remove that as well.
Issue identified using platform_get_irq.cocci coccinelle semantic patch.
Signed-off-by: Deepak R Varma <drv@mailo.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/Y/+j27kqdhflPtaj@ubun2204.myguest.virtualbox.org
|
|
Not all Qcom platforms support IRQ mode for ECC handling. For those
platforms, the current EDAC driver will not be probed due to missing ECC
IRQ in devicetree.
So add support for polling mode so that the EDAC driver can be used on all
Qcom platforms supporting LLCC.
The polling delay of 5000ms is chosen based on Qcom downstream/vendor
driver.
Reported-by: Luca Weiss <luca.weiss@fairphone.com>
Tested-by: Luca Weiss <luca.weiss@fairphone.com>
Tested-by: Steev Klimaszewski <steev@kali.org> # Thinkpad X13s
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sa8540p-ride
Reviewed-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230314080443.64635-14-manivannan.sadhasivam@linaro.org
|
