summaryrefslogtreecommitdiff
path: root/drivers/edac
AgeCommit message (Collapse)AuthorFilesLines
2017-06-29EDAC, pnd2: Fix Apollo Lake DIMM detectionTony Luck1-3/+8
Non-existent or empty DIMM slots result in error return from RD_REGP(). But we shouldn't give up on failure. So long as we find at least one DIMM we can continue. Signed-off-by: Tony Luck <tony.luck@intel.com> Cc: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/20170628234407.21521-1-tony.luck@intel.com Signed-off-by: Borislav Petkov <bp@suse.de>
2017-06-29EDAC, i5000, i5400: Fix definition of NRECMEMB registerJérémy Lefaure2-5/+5
In the i5000 and i5400 drivers, the NRECMEMB register is defined as a 16-bit value, which results in wrong shifts in the code, as reported by sparse. In the datasheets ([1], section 3.9.22.20 and [2], section 3.9.22.21), this register is a 32-bit register. A u32 value for the register fixes the wrong shifts warnings and matches the datasheet. Also fix the mask to access to the CAS bits [27:16] in the i5000 driver. [1]: https://www.intel.com/content/dam/doc/datasheet/5000p-5000v-5000z-chipset-memory-controller-hub-datasheet.pdf [2]: https://www.intel.se/content/dam/doc/datasheet/5400-chipset-memory-controller-hub-datasheet.pdf Signed-off-by: Jérémy Lefaure <jeremy.lefaure@lse.epita.fr> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/20170629005729.8478-1-jeremy.lefaure@lse.epita.fr Signed-off-by: Borislav Petkov <bp@suse.de>
2017-06-26EDAC, pnd2: Make function sbi_send() staticColin Ian King1-2/+2
The function sbi_send() is local to just pnd2_edac.c and does not need to be in global scope, so make it static. Signed-off-by: Colin Ian King <colin.king@canonical.com> Cc: Tony Luck <tony.luck@intel.com> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/20170623084855.9197-1-colin.king@canonical.com Signed-off-by: Borislav Petkov <bp@suse.de>
2017-06-23EDAC, pnd2: Return proper error value from apl_rd_reg()Gustavo A. R. Silva1-2/+3
Add code comment to make it clear that the fall-through is intentional and, OR ret with its previous value to avoid overwriting it so that callers can check the correct return value. Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Cc: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Cc: Tony Luck <tony.luck@intel.com> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/20170622220535.GA4896@embeddedgus [ Massage a bit. ] Signed-off-by: Borislav Petkov <bp@suse.de>
2017-06-14EDAC, altera: Simplify calculation of total memoryChris Packham1-16/+8
Use of_address_to_resource() and resource_size() instead of manually parsing the "reg" property from the "memory" node(s). Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Tested-by: Thor Thayer <thor.thayer@linux.intel.com> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/20170606235500.22772-3-chris.packham@alliedtelesis.co.nz Signed-off-by: Borislav Petkov <bp@suse.de>
2017-06-14EDAC, sb_edac: Avoid creating SOCK memory controllerQiuxu Zhuo1-0/+5
Xiaolong Ye reported the following failure on Broadwell D server: EDAC sbridge: Some needed devices are missing EDAC MC: Removed device 0 for sbridge_edac.c Broadwell SrcID#0_Ha#0: DEV 0000:ff:12.0 EDAC sbridge: Couldn't find mci handler EDAC sbridge: Failed to register device with error -19. Broadwell D (only IMC0 per socket) and Broadwell X (IMC0 and IMC1 per socket) use the same PCI device IDs for IMC0 per socket, then they share pci_dev_descr_broadwell_table (n_imcs_per_sock=2). In this case, Broadwell D wrongly creates the nonexistent SOCK EDAC memory controller and reports above error messages, since it has no IMC1 per socket. Avoid creating the nonexistent SOCK memory controller. Reported-and-tested-by: Xiaolong Ye <xiaolong.ye@intel.com> Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Cc: Tony Luck <tony.luck@intel.com> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/20170608113351.25323-1-qiuxu.zhuo@intel.com [ Massage. ] Signed-off-by: Borislav Petkov <bp@suse.de>
2017-06-12EDAC, mce_amd: Fix typo in SMCA error descriptionYazen Ghannam1-1/+1
Fix typo in "poison consumption" error description. Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/1497286703-62853-1-git-send-email-Yazen.Ghannam@amd.com Signed-off-by: Borislav Petkov <bp@suse.de>
2017-06-09EDAC, mv64x60: Sanity check edac_op_state before registeringChris Packham1-6/+1
edac_op_state is a module parameter which affects the behaviour of the driver probe which can potentially be invoked as soon as the platform driver registration happens. Because of this we need to ensure that we sanity check the module parameter before calling platform_register_drivers(). Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/20170607215530.8604-1-chris.packham@alliedtelesis.co.nz Signed-off-by: Borislav Petkov <bp@suse.de>
2017-06-01EDAC, thunderx: Fix a warning during l2c debugfs node creationVadim Lomovtsev1-1/+1
Compare the number of debugfs entries created by thunderx_create_debugfs_nodes() with the requested number of entries to properly determine whether to print a warning. Signed-off-by: Vadim Lomovtsev <Vadim.Lomovtsev@caviumnetworks.com> Cc: linux-edac <linux-edac@vger.kernel.org> Cc: linux-mips@linux-mips.org Link: http://lkml.kernel.org/r/20170531155157.93583-1-stemerkhanov@cavium.com Signed-off-by: Sergey Temerkhanov <s.temerkhanov@gmail.com> Signed-off-by: Borislav Petkov <bp@suse.de>
2017-05-30EDAC, mv64x60: Check driver registration successChris Packham1-2/+7
Check the return status of platform_driver_register() in mv64x60_edac_init(). Only output messages and initialise the edac_op_state if the registration is successful. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Cc: linux-edac <linux-edac@vger.kernel.org> Cc: linuxppc-dev@lists.ozlabs.org Link: http://lkml.kernel.org/r/20170529212142.25572-2-chris.packham@alliedtelesis.co.nz Signed-off-by: Borislav Petkov <bp@suse.de>
2017-05-28EDAC, ie31200: Add Intel Kaby Lake CPU supportJason Baron1-1/+12
Kaby Lake seems to work just like Skylake. Reported-and-tested-by: Doug Thompson <bc.tdw@recursor.net> Signed-off-by: Jason Baron <jbaron@akamai.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Tony Luck <tony.luck@intel.com Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/1495823683-32569-1-git-send-email-jbaron@akamai.com Signed-off-by: Borislav Petkov <bp@suse.de>
2017-05-26EDAC, mv64x60: Replace in_le32()/out_le32() with readl()/writel()Chris Packham1-42/+42
To allow this driver to be used on non-powerpc platforms it needs to use io accessors suitable for all platforms. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Cc: linux-edac <linux-edac@vger.kernel.org> Cc: linuxppc-dev@lists.ozlabs.org Link: http://lkml.kernel.org/r/20170518083135.28048-4-chris.packham@alliedtelesis.co.nz Signed-off-by: Borislav Petkov <bp@suse.de>
2017-05-26EDAC, mv64x60: Fix pdata->nameChris Packham1-1/+1
Change this from mpc85xx_pci_err to mv64x60_pci_err. The former is likely a hangover from when this driver was created. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Cc: linux-edac <linux-edac@vger.kernel.org> Cc: linuxppc-dev@lists.ozlabs.org Link: http://lkml.kernel.org/r/20170518083135.28048-3-chris.packham@alliedtelesis.co.nz Signed-off-by: Borislav Petkov <bp@suse.de>
2017-05-25EDAC, sb_edac: Bump driver version and do some cleanupsQiuxu Zhuo1-44/+21
Collapse 'case:' in *_mci_bind_devs() and update driver version from 1.1.1 to 1.1.2. Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/20170523000934.87971-1-qiuxu.zhuo@intel.com Signed-off-by: Borislav Petkov <bp@suse.de>
2017-05-25EDAC, sb_edac: Check if ECC enabled when at least one DIMM is presentQiuxu Zhuo1-85/+18
This is based on previous work by Patrick Geary, see Link. Additional cleanups ontop: - Remove the code to read MCMTR from pci_ha1_ta and CHN_TO_HA macro, now that TA0 and TA1 are unified. - Remove get_pdev_same_bus(), since in get_dimm_config() the variable "pvt->pci_ta" for KNL is also ready, we can simply use pci_read_config_dword(pvt->pci_ta, KNL_MCMTR, &pvt->info.mcmtr) to read MCMTR. Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Cc: linux-edac <linux-edac@vger.kernel.org> Link: https://lkml.kernel.org/r/57884350.1030401@supermicro.com Link: http://lkml.kernel.org/r/20170523000910.87925-1-qiuxu.zhuo@intel.com [ Make __populate_dimms() return int. ] Signed-off-by: Borislav Petkov <bp@suse.de>
2017-05-25EDAC, sb_edac: Drop NUM_CHANNELS from 8 back to 4Qiuxu Zhuo1-1/+1
We don't need this quirk anymore now that the EDAC memory controller representation matches the hardware. Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/20170523000834.87881-1-qiuxu.zhuo@intel.com [ Commit message. ] Signed-off-by: Borislav Petkov <bp@suse.de>
2017-05-25EDAC, sb_edac: Carve out dimm-populating loopBorislav Petkov1-58/+66
... to slim down get_dimm_config(). No functionality change. Signed-off-by: Borislav Petkov <bp@suse.de>
2017-05-25EDAC, sb_edac: Fix mod_nameBorislav Petkov1-1/+1
It is called "sb_edac.c" now. Signed-off-by: Borislav Petkov <bp@suse.de>
2017-05-25EDAC, sb_edac: Assign EDAC memory controller per h/w controllerQiuxu Zhuo1-84/+84
Tony pointed out: "currently the driver pretends there is one big 8-channel memory controller per socket instead of 2 4-channel controllers. This is fine with all memory controller populated with symmetrical DIMM configurations, but runs into difficulties on asymmetrical setups". Restructure the driver to assign an EDAC memory controller to each real h/w memory controller to resolve the issue. Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/20170523000731.87793-1-qiuxu.zhuo@intel.com [ Break some lines at convenient points. ] Signed-off-by: Borislav Petkov <bp@suse.de>
2017-05-25EDAC, sb_edac: Don't use "Socket#" in the memory controller nameTony Luck1-19/+35
EDAC assigns logical memory controller numbers in the order that we find memory controllers, which depends on which PCI bus they are on. Some systems end up with MC0 on socket0, others (e.g Haswell) have MC0 on socket3. All this is made more confusing for users because we use the string "Socket" while generating names for memory controllers, but the number that we attach there is the memory controller number. E.g. EDAC MC0: Giving out device to module sbridge_edac.c controller Haswell Socket#0: DEV 0000:ff:12.0 (INTERRUPT) Change the names to say "SrcID#%d" (where the number we use is read from the h/w associated with the memory controller instead of some logical number internal to the EDAC driver). New message: EDAC MC0: Giving out device to module sbridge_edac.c controller Haswell SrcID#3: DEV 0000:ff:12.0 (INTERRUPT) Reported-by: Andrey Korolyov <andrey@xdel.ru> Reported-by: Patrick Geary <patrickg@supermicro.com> Signed-off-by: Tony Luck <tony.luck@intel.com> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/20170523000603.87748-1-qiuxu.zhuo@intel.com Signed-off-by: Borislav Petkov <bp@suse.de>
2017-05-25EDAC, sb_edac: Classify PCI-IDs by topologyQiuxu Zhuo1-114/+121
Each of the PCI device IDs belongs to a CPU socket, or to one of the integrated memory controllers. Provide an enum to specify the domain of each, and distinguish the resource number in each domain: the number of the PCI device IDs per integrated memory controller/socket, and the number of integrated memory controllers per socket. Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/20170523000533.87704-1-qiuxu.zhuo@intel.com [ Realign pci_dev_descr_knl members. ] Signed-off-by: Borislav Petkov <bp@suse.de>
2017-05-24EDAC, altera: Constify irq_domain_opsTobias Klauser1-1/+1
struct irq_domain_ops is not modified, so it can be made const. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Cc: Thor Thayer <thor.thayer@linux.intel.com> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/20170524133505.1233-1-tklauser@distanz.ch Signed-off-by: Borislav Petkov <bp@suse.de>
2017-05-03EDAC, amd64: Fix reporting of Chip Select sizes on Fam17hYazen Ghannam1-21/+19
The wrong index into the csbases/csmasks arrays was being passed to the function to compute the chip select sizes, which resulted in the wrong size being computed. Address that so that the correct values are computed and printed. Also, redo how we calculate the number of pages in a CS row. Reported-by: Benjamin Bennett <benbennett@gmail.com> Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com> Cc: <stable@vger.kernel.org> # 4.10.x Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/1493313114-11260-1-git-send-email-Yazen.Ghannam@amd.com [ Remove unneeded integer math comment, minor cleanups. ] Signed-off-by: Borislav Petkov <bp@suse.de>
2017-04-27EDAC, ghes: Do not enable it by defaultBorislav Petkov1-1/+0
Leave it to the user to decide whether to enable this or not. Otherwise, platform-specific drivers won't initialize (currently, EDAC supports only a single platform driver loaded). Signed-off-by: Borislav Petkov <bp@suse.de>
2017-04-10EDAC: Rename report status accessorsBorislav Petkov4-8/+8
Change them to have the edac_ prefix. No functionality change. Signed-off-by: Borislav Petkov <bp@suse.de>
2017-04-10EDAC: Delete edac_stub.cBorislav Petkov3-38/+62
Move the remaining functionality to edac_mc.c. Convert "edac_report=" to a module parameter. Signed-off-by: Borislav Petkov <bp@suse.de>
2017-04-10EDAC: Update Kconfig help textBorislav Petkov1-14/+4
Remove the old URLs. Signed-off-by: Borislav Petkov <bp@suse.de>
2017-04-10EDAC: Remove EDAC_MM_EDACBorislav Petkov3-61/+45
Move all the EDAC core functionality behind CONFIG_EDAC and get rid of that indirection. Update defconfigs which had it. While at it, fix dependencies such that EDAC depends on RAS for the tracepoints. Signed-off-by: Borislav Petkov <bp@suse.de> Cc: linux-arm-kernel@lists.infradead.org Cc: linuxppc-dev@lists.ozlabs.org Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: linux-edac@vger.kernel.org
2017-04-10EDAC: Issue tracepoint only when it is definedBorislav Petkov1-4/+7
... and this happens only when CONFIG_RAS is enabled. Signed-off-by: Borislav Petkov <bp@suse.de>
2017-04-10EDAC: Move edac_op_state to edac_mc.cBorislav Petkov2-3/+3
... as part of moving stuff away from edac_stub.c Signed-off-by: Borislav Petkov <bp@suse.de>
2017-04-10EDAC: Remove edac_err_assertBorislav Petkov2-20/+1
... and the glue around it. It is not needed anymore. Signed-off-by: Borislav Petkov <bp@suse.de>
2017-04-10EDAC: Get rid of edac_handlersBorislav Petkov2-7/+2
Use mc_devices list instead to check whether we have EDAC driver instances successfully registered with EDAC core. Signed-off-by: Borislav Petkov <bp@suse.de>
2017-04-10x86/nmi, EDAC: Get rid of DRAM error reporting thru PCI SERR NMIBorislav Petkov1-22/+0
Apparently, some machines used to report DRAM errors through a PCI SERR NMI. This is why we have a call into EDAC in the NMI handler. See c0d121720220 ("drivers/edac: add new nmi rescan"). From looking at the patch above, that's two drivers: e752x_edac.c and e7xxx_edac.c. Now, I wanna say those are old machines which are probably decommissioned already. Tony says that "[t]the newest CPU supported by either of those drivers is the Xeon E7520 (a.k.a. "Nehalem") released in Q1'2010. Possibly some folks are still using these ... but people that hold onto h/w for 7 years generally cling to old s/w too ... so I'd guess it unlikely that we will get complaints for breaking these in upstream." So even if there is a small number still in use, we did load EDAC with edac_op_state == EDAC_OPSTATE_POLL by default (we still do, in fact) which means a default EDAC setup without any parameters supplied on the command line or otherwise would never even log the error in the NMI handler because we're polling by default: inline int edac_handler_set(void) { if (edac_op_state == EDAC_OPSTATE_POLL) return 0; return atomic_read(&edac_handlers); } So, long story short, I'd like to get rid of that nastiness called edac_stub.c and confine all the EDAC drivers solely to drivers/edac/. If we ever have to do stuff like that again, it should be notifiers we're using and not some insanity like this one. Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com>
2017-04-10EDAC, highbank: Align Makefile directivesBorislav Petkov1-2/+2
... like the rest of the file. Signed-off-by: Borislav Petkov <bp@suse.de>
2017-04-07EDAC, thunderx: Remove unused codeSergey Temerkhanov1-11/+2
Remove unused code reserved for upcoming CPUs. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Sergey Temerkhanov <s.temerkhanov@gmail.com> Cc: David Daney <david.daney@cavium.com> Cc: Jan.Glauber@cavium.com Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/20170406113834.17153-1-s.temerkhanov@gmail.com Signed-off-by: Borislav Petkov <bp@suse.de>
2017-04-07EDAC, thunderx: Change LMC index calculationSergey Temerkhanov1-1/+1
Shift the node number by 3 bits instead of 8 allowing proper functioning with default EDAC_MAX_MCS. Signed-off-by: Sergey Temerkhanov <s.temerkhanov@gmail.com> Cc: David Daney <david.daney@cavium.com> Cc: Jan.Glauber@cavium.com Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/20170406113755.17082-1-s.temerkhanov@gmail.com Signed-off-by: Borislav Petkov <bp@suse.de>
2017-04-06EDAC, altera: Fix peripheral warnings for Cyclone5Thor Thayer1-4/+18
The peripherals' RAS functionality only exist on the Arria10 SoCFPGA. The Cyclone5 initialization generates EDAC warnings when the peripherals aren't found in the device tree. Fix by checking for Arria10 in the init functions. Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/1491415262-5018-1-git-send-email-thor.thayer@linux.intel.com Signed-off-by: Borislav Petkov <bp@suse.de>
2017-04-05EDAC, thunderx: Fix L2C MCI interrupt disableJan Glauber1-1/+1
Fix a typo that disabled the MCI interrupts using the wrong bitmask. Signed-off-by: Jan Glauber <jglauber@cavium.com> Cc: David Daney <david.daney@cavium.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Sergey Temerkhanov <s.temerkhanov@gmail.com> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/20170405102739.6301-1-jglauber@cavium.com Signed-off-by: Borislav Petkov <bp@suse.de>
2017-03-27EDAC, thunderx: Add Cavium ThunderX EDAC driverSergey Temerkhanov3-0/+2195
Add support for Cavium ThunderX EDAC capable on-chip peripherals, namely the DRAM controller (LMC), cache coherent processor interconnect (CCPI) and level 2 cache blocks (L2C-TAD, L2C-MCI, L2C-CBC) Signed-off-by: Sergey Temerkhanov <s.temerkhanov@gmail.com> Cc: David.Daney@cavium.com Cc: Jan.Glauber@cavium.com Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/20170324222837.60583-1-s.temerkhanov@gmail.com Signed-off-by: Borislav Petkov <bp@suse.de>
2017-03-26EDAC, pnd2_edac: Fix reported DIMM numberQiuxu Zhuo1-1/+1
DIMM number passed to edac_mc_handle_error() was accidentally hardcoded to zero. Pass in the correct daddr->dimm value. Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de>
2017-03-23EDAC, pnd2_edac: Fix !EDAC_DEBUG buildBorislav Petkov1-1/+5
Provide debugfs function stubs when EDAC_DEBUG is not enabled so that we don't fail the build: drivers/edac/pnd2_edac.c: In function ‘pnd2_init’: drivers/edac/pnd2_edac.c:1521:2: error: implicit declaration of function ‘setup_pnd2_debug’ [-Werror=implicit-function-declaration] setup_pnd2_debug(); ^ drivers/edac/pnd2_edac.c: In function ‘pnd2_exit’: drivers/edac/pnd2_edac.c:1529:2: error: implicit declaration of function ‘teardown_pnd2_debug’ [-Werror=implicit-function-declaration] teardown_pnd2_debug(); ^ Signed-off-by: Borislav Petkov <bp@suse.de>
2017-03-23EDAC: Select DEBUG_FSBorislav Petkov1-0/+1
The debugfs.c functionality relies on DEBUG_FS so select it. Signed-off-by: Borislav Petkov <bp@suse.de>
2017-03-16EDAC, pnd2_edac: Add new EDAC driver for Intel SoC platformsTony Luck4-0/+1853
Initial target for this driver is the Intel Apollo Lake platform and Denverton micro-server, they use the same internal memory controller IP called Pondicherry2. Memory controller registers are not in PCI config space like earlier Intel memory controllers. For Apollo Lake platform they are accessed via a "side-band" interface, for Denverton micro-server they are access via PCI config space and memory map I/O. This driver is for Apollo Lake and Denverton, but only the Denverton is fully enabled while we wait for the sideband driver. Apollo lake driver and initial cut at Denverton driver by Tony Luck. Extensive cleanup, refactoring and basic verification by Qiuxu Zhuo. Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/20170308174539.14432-1-qiuxu.zhuo@intel.com Signed-off-by: Borislav Petkov <bp@suse.de>
2017-03-09EDAC, i5000, i5400: Fix use of MTR_DRAM_WIDTH macroJérémy Lefaure2-3/+4
The MTR_DRAM_WIDTH macro returns the data width. It is sometimes used as if it returned a boolean true if the width if 8. Fix the tests where MTR_DRAM_WIDTH is misused. Signed-off-by: Jérémy Lefaure <jeremy.lefaure@lse.epita.fr> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/20170309011809.8340-1-jeremy.lefaure@lse.epita.fr Signed-off-by: Borislav Petkov <bp@suse.de>
2017-03-06EDAC, xgene: Fix wrongly spelled "procesing"Colin Ian King1-1/+1
Fix spelling mistake in dev_err message. Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Loc Ho <lho@apm.com> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/20170223002609.9440-1-colin.king@canonical.com Signed-off-by: Borislav Petkov <bp@suse.de>
2017-02-20Merge branch 'ras-core-for-linus' of ↵Linus Torvalds5-5/+11
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull RAS updates from Ingo Molnar: "The main changes in this cycle were: - Assign notifier chain priorities for all RAS related handlers to make the ordering explicit (Borislav Petkov) - Improve the AMD MCA banks sysfs output (Yazen Ghannam) - Various cleanups and restructuring of the x86 RAS code (Borislav Petkov)" * 'ras-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/ras, EDAC, acpi: Assign MCE notifier handlers a priority x86/ras: Get rid of mce_process_work() EDAC/mce/amd: Dump TSC value EDAC/mce/amd: Unexport amd_decode_mce() x86/ras/amd/inj: Change dependency x86/ras: Flip the TSC-adding logic x86/ras/amd: Make sysfs names of banks more user-friendly x86/ras/therm_throt: Do not log a fake MCE for thermal events x86/ras/inject: Make it depend on X86_LOCAL_APIC=y
2017-02-16EDAC, mce_amd: Print IPID and Syndrome on a separate lineYazen Ghannam1-5/+4
Currently, the IPID and Syndrome are printed on the same line as the Address. There are cases when we can have a valid Syndrome but not a valid Address. For example, the MCA_SYND register can be used to hold more detailed error info that the hardware folks can use. It's not just DRAM ECC syndromes. There are some error types that aren't related to memory that may have valid syndromes, like some errors related to links in the Data Fabric, etc. In these cases, the IPID and Syndrome are not printed at the same log level as the rest of the stanza, so users won't see them on the console. Console: [Hardware Error]: CPU:16 (17:1:0) MC22_STATUS[Over|CE|MiscV|-|-|-|-|SyndV|-]: 0xd82000000002080b [Hardware Error]: Power, Interrupts, etc. Extended Error Code: 2 Dmesg: [Hardware Error]: CPU:16 (17:1:0) MC22_STATUS[Over|CE|MiscV|-|-|-|-|SyndV|-]: 0xd82000000002080b , Syndrome: 0x000000010b404000, IPID: 0x0001002e00000002 [Hardware Error]: Power, Interrupts, etc. Extended Error Code: 2 Print the IPID first and on a new line. The IPID should always be printed on SMCA systems. The Syndrome will then be printed with the IPID and at the same log level when valid: [Hardware Error]: CPU:16 (17:1:0) MC22_STATUS[Over|CE|MiscV|-|-|-|-|SyndV|-]: 0xd82000000002080b [Hardware Error]: IPID: 0x0001002e00000002, Syndrome: 0x000000010b404000 [Hardware Error]: Power, Interrupts, etc. Extended Error Code: 2 Signed-off-by: Yazen Ghannam <Yazen.Ghannam@amd.com> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/1487192182-2474-1-git-send-email-Yazen.Ghannam@amd.com Signed-off-by: Borislav Petkov <bp@suse.de>
2017-02-14EDAC, amd64: Bump driver versionBorislav Petkov1-1/+1
Last time we did that was when we enabled Bulldozer. Now, we enabled Zen so it is only natural ... :-) Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Yazen Ghannam <Yazen.Ghannam@amd.com>
2017-02-09EDAC, fsl_ddr: Make locally used symbols staticWei Yongjun1-6/+6
Fix the following sparse warnings: drivers/edac/fsl_ddr_edac.c:148:1: warning: symbol 'dev_attr_inject_data_hi' was not declared. Should it be static? drivers/edac/fsl_ddr_edac.c:150:1: warning: symbol 'dev_attr_inject_data_lo' was not declared. Should it be static? drivers/edac/fsl_ddr_edac.c:152:1: warning: symbol 'dev_attr_inject_ctrl' was not declared. Should it be static? Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/20170209150424.15124-1-weiyj.lk@gmail.com Signed-off-by: Borislav Petkov <bp@suse.de>
2017-02-03EDAC, mpc85xx: Add T2080 l2-cache supportChris Packham1-0/+1
The L2 cache controller on the T2080 SoC has similar capabilities to the others already supported by the mpc85xx_edac driver. Add it to the list of compatible devices. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Acked-by: Johannes Thumshirn <jth@kernel.org> Acked-by: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: devicetree@vger.kernel.org Cc: linux-edac <linux-edac@vger.kernel.org> Cc: linuxppc-dev@lists.ozlabs.org Link: http://lkml.kernel.org/r/20170201231624.28843-1-chris.packham@alliedtelesis.co.nz Signed-off-by: Borislav Petkov <bp@suse.de>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-19 11:09:45 +0300