summaryrefslogtreecommitdiff
path: root/drivers/edac/skx_base.c
AgeCommit message (Collapse)AuthorFilesLines
2023-03-13EDAC/skx: Fix overflows on the DRAM row address mapping arraysQiuxu Zhuo1-2/+2
The current DRAM row address mapping arrays skx_{open,close}_row[] only support ranks with sizes up to 16G. Decoding a rank address to a DRAM row address for a 32G rank by using either one of the above arrays by the skx_edac driver, will result in an overflow on the array. For a 32G rank, the most significant DRAM row address bit (the bit17) is mapped from the bit34 of the rank address. Add this new mapping item to both arrays to fix the overflow issue. Fixes: 4ec656bdf43a ("EDAC, skx_edac: Add EDAC driver for Skylake") Reported-by: Feng Xu <feng.f.xu@intel.com> Tested-by: Feng Xu <feng.f.xu@intel.com> Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com> Link: https://lore.kernel.org/all/20230211011728.71764-1-qiuxu.zhuo@intel.com
2022-10-21EDAC: Check for GHES preference in the chipset-specific EDAC driversJia He1-0/+3
Call ghes_get_devices() to check whether ghes_edac should be used on the platform where it is preferred over the corresponding chipset-specific EDAC driver. Unlike the existing edac_get_owner() check, the ghes_get_devices() check works independent to the module_init ordering. [ bp: Massage. ] Suggested-by: Toshi Kani <toshi.kani@hpe.com> Signed-off-by: Jia He <justin.he@arm.com> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lore.kernel.org/r/20221010023559.69655-6-justin.he@arm.com
2022-09-08EDAC/skx_common: Use driver decoder firstQiuxu Zhuo1-2/+7
The performance of driver decoder[1] is better than the performance of firmware decoder[2], especially on frequent correctable errors. So use the driver decoder first, fall back to firmware decoder if the driver decoder is unavailable. Also rename the function pointer skx_decode to driver_decode (better name to contrast with adxl_decode). [1] Decode errors by extracting error information from registers of memory controllers and/or MCA bank registers. [2] Decode errors by calling ACPI DSM methods. Co-developed-by: Youquan Song <youquan.song@intel.com> Signed-off-by: Youquan Song <youquan.song@intel.com> Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com> Link: https://lore.kernel.org/all/20220901194310.115427-1-tony.luck@intel.com/
2021-08-23EDAC/i10nm: Retrieve and print retry_rd_err_log registersYouquan Song1-1/+2
Retrieve and print retry_rd_err_log registers like the earlier change: commit e80634a75aba ("EDAC, skx: Retrieve and print retry_rd_err_log registers") This is a little trickier than on Skylake because of potential interference with BIOS use of the same registers. The default behavior is to ignore these registers. A module parameter retry_rd_err_log(default=0) controls the mode of operation: - 0=off : Default. - 1=bios : Linux doesn't reset any control bits, but just reports values. This is "no harm" mode, but it may miss reporting some data. - 2=linux: Linux tries to take control and resets mode bits, clears valid/UC bits after reading. This should be more reliable (especially if BIOS interference is reduced by disabling eMCA reporting mode in BIOS setup). Co-developed-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Signed-off-by: Youquan Song <youquan.song@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com> Link: https://lore.kernel.org/r/20210818175701.1611513-3-tony.luck@intel.com
2021-06-18EDAC/Intel: Do not load EDAC driver when running as a guestLuck, Tony1-0/+3
There's little to no point in loading an EDAC driver running in a guest: 1) The CPU model reported by CPUID may not represent actual h/w 2) The hypervisor likely does not pass in access to memory controller devices 3) Hypervisors generally do not pass corrected error details to guests Add a check in each of the Intel EDAC drivers for X86_FEATURE_HYPERVISOR and simply return -ENODEV in the init routine. Acked-by: Borislav Petkov <bp@suse.de> Signed-off-by: Tony Luck <tony.luck@intel.com> Link: https://lore.kernel.org/r/20210615174419.GA1087688@agluck-desk2.amr.corp.intel.com
2020-11-19EDAC/i10nm: Add Intel Sapphire Rapids server supportQiuxu Zhuo1-3/+3
The Sapphire Rapids CPU model shares the same memory controller architecture with Ice Lake server. There are some configurations different from Ice Lake server as below: - The device ID for configuration agent. - The size for per channel memory-mapped I/O. - The DDR5 memory support. So add the above configurations and the Sapphire Rapids CPU model ID for EDAC support. Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2020-06-16EDAC, {skx,i10nm}: Use CPU stepping macro to pass configurationsQiuxu Zhuo1-1/+1
Use the X86_MATCH_INTEL_FAM6_MODEL_STEPPINGS() macro to pass CPU stepping specific configurations to {skx,i10nm}_init(), so can delete the CPU stepping check from 10nm_init(). Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com> Link: https://lore.kernel.org/r/20200509010822.76331-1-qiuxu.zhuo@intel.com
2020-06-01Merge branches 'edac-i10nm' and 'edac-misc' into edac-updates-for-5.8Borislav Petkov1-14/+19
Signed-off-by: Borislav Petkov <bp@suse.de>
2020-05-20EDAC/skx: Use the mcmtr register to retrieve close_pg/bank_xor_enableQiuxu Zhuo1-12/+8
The skx_edac driver wrongly uses the mtr register to retrieve two fields close_pg and bank_xor_enable. Fix it by using the correct mcmtr register to get the two fields. Cc: <stable@vger.kernel.org> Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Reported-by: Matthew Riley <mattdr@google.com> Acked-by: Aristeu Rozanski <aris@redhat.com> Signed-off-by: Tony Luck <tony.luck@intel.com> Link: https://lore.kernel.org/r/20200515210146.1337-1-tony.luck@intel.com
2020-04-27EDAC, {skx,i10nm}: Make some configurations CPU model specificQiuxu Zhuo1-2/+11
The device ID for configuration agent PCI device and the offset for bus number configuration register can be CPU model specific. So add a new structure res_config to make them configurable and pass res_config to {skx,i10nm}_init() and skx_get_all_bus_mappings() for use. Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com> Reviewed-by: Borislav Petkov <bp@suse.de> Link: https://lore.kernel.org/r/20200427083246.GB11036@zn.tnic
2020-03-24EDAC: Convert to new X86 CPU match macrosThomas Gleixner1-1/+1
The new macro set has a consistent namespace and uses C99 initializers instead of the grufty C89 ones. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Tony Luck <tony.luck@intel.com> Link: https://lkml.kernel.org/r/20200320131509.673579000@linutronix.de
2019-11-09EDAC: Replace EDAC_DIMM_PTR() macro with edac_get_dimm() functionRobert Richter1-2/+1
The EDAC_DIMM_PTR() macro takes 3 arguments from struct mem_ctl_info. Clean up this interface to only pass the mci struct and replace this macro with a new function edac_get_dimm(). Also introduce an edac_get_dimm_by_index() function for later use. This allows it to get a DIMM pointer only by a given index. This can be useful if the DIMM's position within the layers of the memory controller or the exact size of the layers are unknown. Small style changes made for some hunks after applying the semantic patch. Semantic patch used: @@ expression mci, a, b,c; @@ -EDAC_DIMM_PTR(mci->layers, mci->dimms, mci->n_layers, a, b, c) +edac_get_dimm(mci, a, b, c) [ bp: Touchups. ] Signed-off-by: Robert Richter <rrichter@marvell.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: "linux-edac@vger.kernel.org" <linux-edac@vger.kernel.org> Cc: James Morse <james.morse@arm.com> Cc: Jason Baron <jbaron@akamai.com> Cc: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Cc: Tero Kristo <t-kristo@ti.com> Cc: Tony Luck <tony.luck@intel.com> Link: https://lkml.kernel.org/r/20191106093239.25517-2-rrichter@marvell.com
2019-10-19EDAC, skx: Retrieve and print retry_rd_err_log registersTony Luck1-3/+48
Skylake logs some additional useful information in per-channel registers in addition the the architectural status/addr/misc logged in the machine check bank. Pick up this information and add it to the EDAC log: retry_rd_err_[five 32-bit register values] Sorry, no definitions for these registers. OEMs and DIMM vendors will be able to use them to isolate which cells in the DIMM are causing problems. correrrcnt[per rank corrected error counts] Note that if additional errors are logged while these registers are being read, you may see a jumble of values some from earlier errors, others from later errors (since the registers report the most recent logged error). The correrrcnt registers provide error counts per possible rank. If these counts only change by one since the previous error logged for this channel, then it is safe to assume that the registers logged provide a coherent view of one error. With this change EDAC logs look like this: EDAC MC4: 1 CE memory read error on CPU_SrcID#2_MC#0_Chan#1_DIMM#0 (channel:1 slot:0 page:0x8f26018 offset:0x0 grain:32 syndrome:0x0 - err_code:0x0101:0x0091 socket:2 imc:0 rank:0 bg:0 ba:0 row:0x1f880 col:0x200 retry_rd_err_log[0001a209 00000000 00000001 04800001 0001f880] correrrcnt[0001 0000 0000 0000 0000 0000 0000 0000]) Acked-by: Aristeu Rozanski <aris@redhat.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2019-06-26EDAC, skx, i10nm: Fix source ID register offsetQiuxu Zhuo1-1/+1
The source ID register offset for Skylake server is 0xf0, while for Icelake server is 0xf8. Pass the correct offset to get the source ID. Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2019-03-23EDAC, skx, i10nm: Make skx_common.c a pure libraryQiuxu Zhuo1-1/+49
The following Kconfig constellations fail randconfig builds: CONFIG_ACPI_NFIT=y CONFIG_EDAC_DEBUG=y CONFIG_EDAC_SKX=m CONFIG_EDAC_I10NM=y or CONFIG_ACPI_NFIT=y CONFIG_EDAC_DEBUG=y CONFIG_EDAC_SKX=y CONFIG_EDAC_I10NM=m with: ... CC [M] drivers/edac/skx_common.o ... .../skx_common.o:.../skx_common.c:672: undefined reference to `__this_module' That is because if one of the two drivers - skx_edac or i10nm_edac - is built-in and the other one is a module, the shared file skx_common.c gets linked into a module object by kbuild. Therefore, when linking that same file into vmlinux, the '__this_module' symbol used in debugfs isn't defined, leading to the above error. Fix it by moving all debugfs code from skx_common.c to both skx_base.c and i10nm_base.c respectively. Thus, skx_common.c doesn't refer to the '__this_module' symbol anymore. Clarify skx_common.c's purpose at the top of the file for future reference, while at it. [ bp: Make text more readable. ] Fixes: d4dc89d069aa ("EDAC, i10nm: Add a driver for Intel 10nm server processors") Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: James Morse <james.morse@arm.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: linux-edac <linux-edac@vger.kernel.org> Link: https://lkml.kernel.org/r/20190321221339.GA32323@agluck-desk
2019-02-02EDAC, skx_edac: Delete duplicated codeQiuxu Zhuo1-0/+650
Delete the duplicated code from skx_edac.c and rename skx_edac.c to skx_base.c. Update the Makefile to build the skx_edac driver from skx_base.c and skx_common.c. Add SPDX to skx_base.c and clean out unnecessary #include lines. [ bp: Drop the license boilerplate - there's an SPDX identifier now. ] Co-developed-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: James Morse <james.morse@arm.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: linux-edac <linux-edac@vger.kernel.org> Link: https://lkml.kernel.org/r/20190130191519.15393-4-tony.luck@intel.com
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-04 05:48:47 +0300