summaryrefslogtreecommitdiff
path: root/drivers/crypto
AgeCommit message (Collapse)AuthorFilesLines
2021-09-24crypto: ccp - fix resource leaks in ccp_run_aes_gcm_cmd()Dan Carpenter1-6/+8
There are three bugs in this code: 1) If we ccp_init_data() fails for &src then we need to free aad. Use goto e_aad instead of goto e_ctx. 2) The label to free the &final_wa was named incorrectly as "e_tag" but it should have been "e_final_wa". One error path leaked &final_wa. 3) The &tag was leaked on one error path. In that case, I added a free before the goto because the resource was local to that block. Fixes: 36cf515b9bbe ("crypto: ccp - Enable support for AES GCM on v5 CCPs") Reported-by: "minihanshen(沈明航)" <minihanshen@tencent.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: John Allen <john.allen@amd.com> Tested-by: John Allen <john.allen@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-09-08Merge tag 'pci-v5.15-changes' of ↵Linus Torvalds1-3/+1
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Enumeration: - Convert controller drivers to generic_handle_domain_irq() (Marc Zyngier) - Simplify VPD (Vital Product Data) access and search (Heiner Kallweit) - Update bnx2, bnx2x, bnxt, cxgb4, cxlflash, sfc, tg3 drivers to use simplified VPD interfaces (Heiner Kallweit) - Run Max Payload Size quirks before configuring MPS; work around ASMedia ASM1062 SATA MPS issue (Marek Behún) Resource management: - Refactor pci_ioremap_bar() and pci_ioremap_wc_bar() (Krzysztof Wilczyński) - Optimize pci_resource_len() to reduce kernel size (Zhen Lei) PCI device hotplug: - Fix a double unmap in ibmphp (Vishal Aslot) PCIe port driver: - Enable Bandwidth Notification only if port supports it (Stuart Hayes) Sysfs/proc/syscalls: - Add schedule point in proc_bus_pci_read() (Krzysztof Wilczyński) - Return ~0 data on pciconfig_read() CAP_SYS_ADMIN failure (Krzysztof Wilczyński) - Return "int" from pciconfig_read() syscall (Krzysztof Wilczyński) Virtualization: - Extend "pci=noats" to also turn on Translation Blocking to protect against some DMA attacks (Alex Williamson) - Add sysfs mechanism to control the type of reset used between device assignments to VMs (Amey Narkhede) - Add support for ACPI _RST reset method (Shanker Donthineni) - Add ACS quirks for Cavium multi-function devices (George Cherian) - Add ACS quirks for NXP LX2xx0 and LX2xx2 platforms (Wasim Khan) - Allow HiSilicon AMBA devices that appear as fake PCI devices to use PASID and SVA (Zhangfei Gao) Endpoint framework: - Add support for SR-IOV Endpoint devices (Kishon Vijay Abraham I) - Zero-initialize endpoint test tool parameters so we don't use random parameters (Shunyong Yang) APM X-Gene PCIe controller driver: - Remove redundant dev_err() call in xgene_msi_probe() (ErKun Yang) Broadcom iProc PCIe controller driver: - Don't fail devm_pci_alloc_host_bridge() on missing 'ranges' because it's optional on BCMA devices (Rob Herring) - Fix BCMA probe resource handling (Rob Herring) Cadence PCIe driver: - Work around J7200 Link training electrical issue by increasing delays in LTSSM (Nadeem Athani) Intel IXP4xx PCI controller driver: - Depend on ARCH_IXP4XX to avoid useless config questions (Geert Uytterhoeven) Intel Keembay PCIe controller driver: - Add Intel Keem Bay PCIe controller (Srikanth Thokala) Marvell Aardvark PCIe controller driver: - Work around config space completion handling issues (Evan Wang) - Increase timeout for config access completions (Pali Rohár) - Emulate CRS Software Visibility bit (Pali Rohár) - Configure resources from DT 'ranges' property to fix I/O space access (Pali Rohár) - Serialize INTx mask/unmask (Pali Rohár) MediaTek PCIe controller driver: - Add MT7629 support in DT (Chuanjia Liu) - Fix an MSI issue (Chuanjia Liu) - Get syscon regmap ("mediatek,generic-pciecfg"), IRQ number ("pci_irq"), PCI domain ("linux,pci-domain") from DT properties if present (Chuanjia Liu) Microsoft Hyper-V host bridge driver: - Add ARM64 support (Boqun Feng) - Support "Create Interrupt v3" message (Sunil Muthuswamy) NVIDIA Tegra PCIe controller driver: - Use seq_puts(), move err_msg from stack to static, fix OF node leak (Christophe JAILLET) NVIDIA Tegra194 PCIe driver: - Disable suspend when in Endpoint mode (Om Prakash Singh) - Fix MSI-X address programming error (Om Prakash Singh) - Disable interrupts during suspend to avoid spurious AER link down (Om Prakash Singh) Renesas R-Car PCIe controller driver: - Work around hardware issue that prevents Link L1->L0 transition (Marek Vasut) - Fix runtime PM refcount leak (Dinghao Liu) Rockchip DesignWare PCIe controller driver: - Add Rockchip RK356X host controller driver (Simon Xue) TI J721E PCIe driver: - Add support for J7200 and AM64 (Kishon Vijay Abraham I) Toshiba Visconti PCIe controller driver: - Add Toshiba Visconti PCIe host controller driver (Nobuhiro Iwamatsu) Xilinx NWL PCIe controller driver: - Enable PCIe reference clock via CCF (Hyun Kwon) Miscellaneous: - Convert sta2x11 from 'pci_' to 'dma_' API (Christophe JAILLET) - Fix pci_dev_str_match_path() alloc while atomic bug (used for kernel parameters that specify devices) (Dan Carpenter) - Remove pointless Precision Time Management warning when PTM is present but not enabled (Jakub Kicinski) - Remove surplus "break" statements (Krzysztof Wilczyński)" * tag 'pci-v5.15-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (132 commits) PCI: ibmphp: Fix double unmap of io_mem x86/PCI: sta2x11: switch from 'pci_' to 'dma_' API PCI/VPD: Use unaligned access helpers PCI/VPD: Clean up public VPD defines and inline functions cxgb4: Use pci_vpd_find_id_string() to find VPD ID string PCI/VPD: Add pci_vpd_find_id_string() PCI/VPD: Include post-processing in pci_vpd_find_tag() PCI/VPD: Stop exporting pci_vpd_find_info_keyword() PCI/VPD: Stop exporting pci_vpd_find_tag() PCI: Set dma-can-stall for HiSilicon chips PCI: rockchip-dwc: Add Rockchip RK356X host controller driver PCI: dwc: Remove surplus break statement after return PCI: artpec6: Remove local code block from switch statement PCI: artpec6: Remove surplus break statement after return MAINTAINERS: Add entries for Toshiba Visconti PCIe controller PCI: visconti: Add Toshiba Visconti PCIe host controller driver PCI/portdrv: Enable Bandwidth Notification only if port supports it PCI: Allow PASID on fake PCIe devices without TLP prefixes PCI: mediatek: Use PCI domain to handle ports detection PCI: mediatek: Add new method to get irq number ...
2021-08-27crypto: ccp - Add support for new CCP/PSP device IDJohn Allen1-0/+7
Add a new CCP/PSP PCI device ID and corresponding entry in the dev_vdata struct. Signed-off-by: John Allen <john.allen@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-08-21crypto: hisilicon - check _PS0 and _PR0 methodWeili Qian1-0/+4
To support runtime PM, use the function 'pci_set_power_state' to change the power state. Therefore, method _PS0 or _PR0 needs to be filled by platform. So check whether the method is supported, if not, print a prompt information. Signed-off-by: Weili Qian <qianweili@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-08-21crypto: hisilicon - change parameter passing of debugfs functionWeili Qian3-36/+20
To avoid repeatedly obtaining 'qm' from 'filp', parameter passing of debugfs function directly use 'qm' instead of 'filp'. Signed-off-by: Weili Qian <qianweili@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-08-21crypto: hisilicon - support runtime PM for accelerator deviceWeili Qian5-30/+297
Add runtime PM support for Kunpeng930 accelerator device. Signed-off-by: Weili Qian <qianweili@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-08-21crypto: hisilicon - add runtime PM opsWeili Qian2-0/+120
Accelerator devices support runtime PM to reduce power consumption. This patch adds the runtime PM suspend/resume callbacks to the accelerator devices. Signed-off-by: Weili Qian <qianweili@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-08-21crypto: hisilicon - using 'debugfs_create_file' instead of ↵Weili Qian5-27/+81
'debugfs_create_regset32' The accelerator devices support runtime PM, when device is in suspended, an exception will occur if reading registers. Therefore, this patch uses 'debugfs_create_file' instead of 'debugfs_create_regset32' to create debugfs file, and then the driver can get the device status before reading the register. Signed-off-by: Weili Qian <qianweili@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-08-21crypto: hisilicon/sec - modify the hardware endian configurationKai Ye2-27/+9
When the endian configuration of the hardware is abnormal, it will cause the SEC engine is faulty that reports empty message. And it will affect the normal function of the hardware. Currently the soft configuration method can't restore the faulty device. The endian needs to be configured according to the system properties. So fix it. Signed-off-by: Kai Ye <yekai13@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-08-21crypto: hisilicon/sec - fix the abnormal exiting processKai Ye1-1/+2
Because the algs registration process has added a judgment. So need to add the judgment for the abnormal exiting process. Signed-off-by: Kai Ye <yekai13@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-08-21crypto: qat - store vf.compatible flagGiovanni Cabiddu1-1/+3
If the VF is newer than the PF, it decides whether it is compatible or not. In case it is compatible, store that information in the vf.compatible flag in the accel_dev structure. Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Suggested-by: Fiona Trahe <fiona.trahe@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-08-21crypto: qat - do not export adf_iov_putmsg()Giovanni Cabiddu1-1/+0
The function adf_iov_putmsg() is only used inside the intel_qat module therefore should not be exported. Remove EXPORT_SYMBOL for the function adf_iov_putmsg(). Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Reviewed-by: Fiona Trahe <fiona.trahe@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-08-21crypto: qat - flush vf workqueue at driver removalAhsan Atta5-0/+33
There is a race condition during shutdown in adf_disable_sriov() where both the PF and the VF drivers are loaded on the host system. The PF notifies a VF with a "RESTARTING" message due to which the VF starts an asynchronous worker to stop and shutdown itself. At the same time the PF calls pci_disable_sriov() which invokes the remove() routine on the VF device driver triggering the shutdown flow again. This change fixes the problem by ensuring that the VF flushes the worker that performs stop()/shutdown() before these two functions are called in the remove(). To make sure that no additional PV/VF messages are processed by the VF, interrupts are disabled before flushing the workqueue. Signed-off-by: Ahsan Atta <ahsan.atta@intel.com> Co-developed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Reviewed-by: Fiona Trahe <fiona.trahe@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-08-21crypto: qat - remove the unnecessary get_vintmsk_offset()Marco Chiappero14-44/+2
All QAT GEN2 devices share the same register offset for masking interrupts, so they don't need any complex device specific infrastructure. Remove this function in favor of a constant in order to simplify the code. Also, future generations may require a more complex device specific handling, making the current approach obsolete anyway. Signed-off-by: Marco Chiappero <marco.chiappero@intel.com> Co-developed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Reviewed-by: Fiona Trahe <fiona.trahe@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-08-21crypto: qat - fix naming of PF/VF enable functionsMarco Chiappero9-13/+13
Currently all the functions related to the activation of the PFVF protocol, both on PF and VF, include the direction specific "vf2pf" name. Replace the existing naming schema with: - a direction agnostic naming, that applies to both PF and VF, for the function pointer ("pfvf") - a direction specific naming schema for the implementations ("pf2vf" or "vf2pf") In particular this patch renames: - adf_pf_enable_vf2pf_comms() in adf_enable_pf2vf_comms() - enable_vf2pf_comms() in enable_pfvf_comms() Signed-off-by: Marco Chiappero <marco.chiappero@intel.com> Co-developed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Reviewed-by: Fiona Trahe <fiona.trahe@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-08-21crypto: qat - complete all the init steps before service notificationMarco Chiappero1-4/+6
Make sure all the steps in the initialization sequence are complete before any completion event notification. Signed-off-by: Marco Chiappero <marco.chiappero@intel.com> Co-developed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Reviewed-by: Fiona Trahe <fiona.trahe@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-08-21crypto: qat - move IO virtualization functionsGiovanni Cabiddu4-15/+17
Move IOV functions at the end of hw_data so that PFVF functions related functions are group together. Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Reviewed-by: Fiona Trahe <fiona.trahe@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-08-21crypto: qat - fix naming for init/shutdown VF to PF notificationsMarco Chiappero5-16/+16
At start and shutdown, VFs notify the PF about their state. These notifications are carried out through a message exchange using the PFVF protocol. Function names lead to believe they do perform init or shutdown logic. This is to fix the naming to better reflect their purpose. Signed-off-by: Marco Chiappero <marco.chiappero@intel.com> Co-developed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Reviewed-by: Fiona Trahe <fiona.trahe@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-08-21crypto: qat - protect interrupt mask CSRs with a spinlockKanchana Velusamy7-4/+41
In the PF interrupt handler, the interrupt is disabled for a set of VFs by writing to the interrupt source mask register, ERRMSK. The interrupt is re-enabled in the bottom half handler by writing to the same CSR. This is done through the functions enable_vf2pf_interrupts() and disable_vf2pf_interrupts() which perform a read-modify-write operation on the ERRMSK registers to mask and unmask the source of interrupt. There can be a race condition where the top half handler for one VF interrupt runs just as the bottom half for another VF is about to re-enable the interrupt. Depending on whether the top or bottom half updates the CSR first, this would result either in a spurious interrupt or in the interrupt not being re-enabled. This patch protects the access of ERRMSK with a spinlock. The functions adf_enable_vf2pf_interrupts() and adf_disable_vf2pf_interrupts() have been changed to acquire a spin lock before accessing and modifying the ERRMSK registers. These functions use spin_lock_irqsave() to disable IRQs and avoid potential deadlocks. In addition, the function adf_disable_vf2pf_interrupts_irq() has been added. This uses spin_lock() and it is meant to be used in the top half only. Signed-off-by: Kanchana Velusamy <kanchanax.velusamy@intel.com> Co-developed-by: Marco Chiappero <marco.chiappero@intel.com> Signed-off-by: Marco Chiappero <marco.chiappero@intel.com> Co-developed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Reviewed-by: Fiona Trahe <fiona.trahe@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-08-21crypto: qat - move pf2vf interrupt [en|dis]able to adf_vf_isr.cMarco Chiappero2-20/+20
Interrupt code to enable interrupts from PF does not belong to the protocol code, so move it to the interrupt handling specific file for better code organization. Signed-off-by: Marco Chiappero <marco.chiappero@intel.com> Co-developed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Reviewed-by: Fiona Trahe <fiona.trahe@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-08-21crypto: qat - fix reuse of completion variableMarco Chiappero1-0/+2
Use reinit_completion() to set to a clean state a completion variable, used to coordinate the VF to PF request-response flow, before every new VF request. Signed-off-by: Marco Chiappero <marco.chiappero@intel.com> Co-developed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Reviewed-by: Fiona Trahe <fiona.trahe@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-08-21crypto: qat - remove intermediate tasklet for vf2pfSvyatoslav Pankratov4-13/+5
The PF driver uses the tasklet vf2pf_bh_tasklet to schedule a workqueue to handle the vf2vf protocol (pf2vf_resp_wq). Since the tasklet is only used to schedule the workqueue, this patch removes it and schedules the pf2vf_resp_wq workqueue directly for the top half. Signed-off-by: Svyatoslav Pankratov <svyatoslav.pankratov@intel.com> Co-developed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Reviewed-by: Marco Chiappero <marco.chiappero@intel.com> Reviewed-by: Fiona Trahe <fiona.trahe@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-08-21crypto: qat - rename compatibility version definitionMarco Chiappero9-17/+17
Rename ADF_PFVF_COMPATIBILITY_VERSION in ADF_PFVF_COMPAT_THIS_VERSION since it is used to indicate the current version of the PFVF protocol. Signed-off-by: Marco Chiappero <marco.chiappero@intel.com> Co-developed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Reviewed-by: Fiona Trahe <fiona.trahe@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-08-21crypto: qat - prevent spurious MSI interrupt in PFMarco Chiappero2-7/+20
There is a chance that the PFVF handler, adf_vf2pf_req_hndl(), runs twice for the same request when multiple interrupts come simultaneously from different VFs. Since the source VF is identified by a positional bit set in the ERRSOU registers and that is not cleared until the bottom half completes, new top halves from other VFs may reschedule a second bottom half for previous interrupts. This patch solves the problem in the ISR handler by not considering sources with already disabled interrupts (and processing pending), as set in the ERRMSK registers. Also, move some definitions where actually needed. Signed-off-by: Marco Chiappero <marco.chiappero@intel.com> Co-developed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Reviewed-by: Fiona Trahe <fiona.trahe@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-08-21crypto: qat - prevent spurious MSI interrupt in VFGiovanni Cabiddu1-1/+11
QAT GEN2 devices suffer from a defect where the MSI interrupt can be sent multiple times. If the second (spurious) interrupt is handled before the bottom half handler runs, then the extra interrupt is effectively ignored because the bottom half is only scheduled once. However, if the top half runs again after the bottom half runs, this will appear as a spurious PF to VF interrupt. This can be avoided by checking the interrupt mask register in addition to the interrupt source register in the interrupt handler. This patch is based on earlier work done by Conor McLoughlin. Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Co-developed-by: Marco Chiappero <marco.chiappero@intel.com> Signed-off-by: Marco Chiappero <marco.chiappero@intel.com> Reviewed-by: Fiona Trahe <fiona.trahe@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-08-21crypto: qat - handle both source of interrupt in VF ISRGiovanni Cabiddu1-3/+4
The top half of the VF drivers handled only a source at the time. If an interrupt for PF2VF and bundle occurred at the same time, the ISR scheduled only the bottom half for PF2VF. This patch fixes the VF top half so that if both sources of interrupt trigger at the same time, both bottom halves are scheduled. This patch is based on earlier work done by Conor McLoughlin. Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Reviewed-by: Marco Chiappero <marco.chiappero@intel.com> Reviewed-by: Fiona Trahe <fiona.trahe@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-08-21crypto: qat - do not ignore errors from enable_vf2pf_comms()Giovanni Cabiddu1-2/+3
The function adf_dev_init() ignores the error code reported by enable_vf2pf_comms(). If the latter fails, e.g. the VF is not compatible with the pf, then the load of the VF driver progresses. This patch changes adf_dev_init() so that the error code from enable_vf2pf_comms() is returned to the caller. Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Reviewed-by: Marco Chiappero <marco.chiappero@intel.com> Reviewed-by: Fiona Trahe <fiona.trahe@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-08-21crypto: qat - enable interrupts only after ISR allocationMarco Chiappero1-2/+2
Enable device interrupts after the setup of the interrupt handlers. Signed-off-by: Marco Chiappero <marco.chiappero@intel.com> Co-developed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Reviewed-by: Fiona Trahe <fiona.trahe@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-08-21crypto: qat - remove empty sriov_configure()Marco Chiappero1-4/+1
Remove the empty implementation of sriov_configure() and set the sriov_configure member of the pci_driver structure to NULL. This way, if a user tries to enable VFs on a device, when kernel and driver are built with CONFIG_PCI_IOV=n, the kernel reports an error message saying that the driver does not support SRIOV configuration via sysfs. Signed-off-by: Marco Chiappero <marco.chiappero@intel.com> Co-developed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Reviewed-by: Fiona Trahe <fiona.trahe@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-08-21crypto: qat - use proper type for vf_maskGiovanni Cabiddu1-3/+4
Replace vf_mask type with unsigned long to avoid a stack-out-of-bound. This is to fix the following warning reported by KASAN the first time adf_msix_isr_ae() gets called. [ 692.091987] BUG: KASAN: stack-out-of-bounds in find_first_bit+0x28/0x50 [ 692.092017] Read of size 8 at addr ffff88afdf789e60 by task swapper/32/0 [ 692.092076] Call Trace: [ 692.092089] <IRQ> [ 692.092101] dump_stack+0x9c/0xcf [ 692.092132] print_address_description.constprop.0+0x18/0x130 [ 692.092164] ? find_first_bit+0x28/0x50 [ 692.092185] kasan_report.cold+0x7f/0x111 [ 692.092213] ? static_obj+0x10/0x80 [ 692.092234] ? find_first_bit+0x28/0x50 [ 692.092262] find_first_bit+0x28/0x50 [ 692.092288] adf_msix_isr_ae+0x16e/0x230 [intel_qat] Fixes: ed8ccaef52fa ("crypto: qat - Add support for SRIOV") Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Reviewed-by: Marco Chiappero <marco.chiappero@intel.com> Reviewed-by: Fiona Trahe <fiona.trahe@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-08-21crypto: qat - fix a typo in a commentChristophe JAILLET1-1/+1
s/Enable/Disable/ when describing 'adf_disable_aer()' Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-08-21crypto: qat - disable AER if an error occurs in probe functionsChristophe JAILLET3-6/+12
If an error occurs after a 'adf_enable_aer()' call, it must be undone by a corresponding 'adf_disable_aer()' call, as already done in the remove function. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-08-21crypto: qat - set DMA mask to 48 bits for Gen2Giovanni Cabiddu6-6/+6
Change the DMA mask from 64 to 48 for Gen2 devices as they cannot handle addresses greater than 48 bits. Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-08-21crypto: qat - simplify code and axe the use of a deprecated APIChristophe JAILLET7-76/+28
The wrappers in include/linux/pci-dma-compat.h should go away. Replace 'pci_set_dma_mask/pci_set_consistent_dma_mask' by an equivalent and less verbose 'dma_set_mask_and_coherent()' call. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Co-developed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-08-21crypto: omap - Fix inconsistent locking of device listsBen Hutchings3-14/+14
lockdep complains that in omap-aes, the list_lock is taken both with softirqs enabled at probe time, and also in softirq context, which could lead to a deadlock: ================================ WARNING: inconsistent lock state 5.14.0-rc1-00035-gc836005b01c5-dirty #69 Not tainted -------------------------------- inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. ksoftirqd/0/7 [HC0[0]:SC1[3]:HE1:SE0] takes: bf00e014 (list_lock){+.?.}-{2:2}, at: omap_aes_find_dev+0x18/0x54 [omap_aes_driver] {SOFTIRQ-ON-W} state was registered at: _raw_spin_lock+0x40/0x50 omap_aes_probe+0x1d4/0x664 [omap_aes_driver] platform_probe+0x58/0xb8 really_probe+0xbc/0x314 __driver_probe_device+0x80/0xe4 driver_probe_device+0x30/0xc8 __driver_attach+0x70/0xf4 bus_for_each_dev+0x70/0xb4 bus_add_driver+0xf0/0x1d4 driver_register+0x74/0x108 do_one_initcall+0x84/0x2e4 do_init_module+0x5c/0x240 load_module+0x221c/0x2584 sys_finit_module+0xb0/0xec ret_fast_syscall+0x0/0x2c 0xbed90b30 irq event stamp: 111800 hardirqs last enabled at (111800): [<c02a21e4>] __kmalloc+0x484/0x5ec hardirqs last disabled at (111799): [<c02a21f0>] __kmalloc+0x490/0x5ec softirqs last enabled at (111776): [<c01015f0>] __do_softirq+0x2b8/0x4d0 softirqs last disabled at (111781): [<c0135948>] run_ksoftirqd+0x34/0x50 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(list_lock); <Interrupt> lock(list_lock); *** DEADLOCK *** 2 locks held by ksoftirqd/0/7: #0: c0f5e8c8 (rcu_read_lock){....}-{1:2}, at: netif_receive_skb+0x6c/0x260 #1: c0f5e8c8 (rcu_read_lock){....}-{1:2}, at: ip_local_deliver_finish+0x2c/0xdc stack backtrace: CPU: 0 PID: 7 Comm: ksoftirqd/0 Not tainted 5.14.0-rc1-00035-gc836005b01c5-dirty #69 Hardware name: Generic AM43 (Flattened Device Tree) [<c010e6e0>] (unwind_backtrace) from [<c010b9d0>] (show_stack+0x10/0x14) [<c010b9d0>] (show_stack) from [<c017c640>] (mark_lock.part.17+0x5bc/0xd04) [<c017c640>] (mark_lock.part.17) from [<c017d9e4>] (__lock_acquire+0x960/0x2fa4) [<c017d9e4>] (__lock_acquire) from [<c0180980>] (lock_acquire+0x10c/0x358) [<c0180980>] (lock_acquire) from [<c093d324>] (_raw_spin_lock_bh+0x44/0x58) [<c093d324>] (_raw_spin_lock_bh) from [<bf00b258>] (omap_aes_find_dev+0x18/0x54 [omap_aes_driver]) [<bf00b258>] (omap_aes_find_dev [omap_aes_driver]) from [<bf00b328>] (omap_aes_crypt+0x94/0xd4 [omap_aes_driver]) [<bf00b328>] (omap_aes_crypt [omap_aes_driver]) from [<c08ac6d0>] (esp_input+0x1b0/0x2c8) [<c08ac6d0>] (esp_input) from [<c08c9e90>] (xfrm_input+0x410/0x1290) [<c08c9e90>] (xfrm_input) from [<c08b6374>] (xfrm4_esp_rcv+0x54/0x11c) [<c08b6374>] (xfrm4_esp_rcv) from [<c0838840>] (ip_protocol_deliver_rcu+0x48/0x3bc) [<c0838840>] (ip_protocol_deliver_rcu) from [<c0838c50>] (ip_local_deliver_finish+0x9c/0xdc) [<c0838c50>] (ip_local_deliver_finish) from [<c0838dd8>] (ip_local_deliver+0x148/0x1b0) [<c0838dd8>] (ip_local_deliver) from [<c0838f5c>] (ip_rcv+0x11c/0x180) [<c0838f5c>] (ip_rcv) from [<c077e3a4>] (__netif_receive_skb_one_core+0x54/0x74) [<c077e3a4>] (__netif_receive_skb_one_core) from [<c077e588>] (netif_receive_skb+0xa8/0x260) [<c077e588>] (netif_receive_skb) from [<c068d6d4>] (cpsw_rx_handler+0x224/0x2fc) [<c068d6d4>] (cpsw_rx_handler) from [<c0688ccc>] (__cpdma_chan_process+0xf4/0x188) [<c0688ccc>] (__cpdma_chan_process) from [<c068a0c0>] (cpdma_chan_process+0x3c/0x5c) [<c068a0c0>] (cpdma_chan_process) from [<c0690e14>] (cpsw_rx_mq_poll+0x44/0x98) [<c0690e14>] (cpsw_rx_mq_poll) from [<c0780810>] (__napi_poll+0x28/0x268) [<c0780810>] (__napi_poll) from [<c0780c64>] (net_rx_action+0xcc/0x204) [<c0780c64>] (net_rx_action) from [<c0101478>] (__do_softirq+0x140/0x4d0) [<c0101478>] (__do_softirq) from [<c0135948>] (run_ksoftirqd+0x34/0x50) [<c0135948>] (run_ksoftirqd) from [<c01583b8>] (smpboot_thread_fn+0xf4/0x1d8) [<c01583b8>] (smpboot_thread_fn) from [<c01546dc>] (kthread+0x14c/0x174) [<c01546dc>] (kthread) from [<c010013c>] (ret_from_fork+0x14/0x38) ... The omap-des and omap-sham drivers appear to have a similar issue. Fix this by using spin_{,un}lock_bh() around device list access in all the probe and remove functions. Signed-off-by: Ben Hutchings <ben.hutchings@mind.be> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-08-21crypto: omap - Avoid redundant copy when using truncated sg listBen Hutchings1-1/+1
omap_crypto_cleanup() currently copies data from sg to orig if either copy flag is set. However OMAP_CRYPTO_SG_COPIED means that sg refers to the same pages as orig, truncated to len bytes. There is no need to copy in this case. Only copy data if the OMAP_CRYPTO_DATA_COPIED flag is set. Fixes: 74ed87e7e7f7 ("crypto: omap - add base support library for common ...") Signed-off-by: Ben Hutchings <ben.hutchings@mind.be> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-08-19PCI: Change the type of probe argument in reset functionsAmey Narkhede1-1/+1
Change the type of probe argument in functions which implement reset methods from int to bool to make the context and intent clear. Suggested-by: Alex Williamson <alex.williamson@redhat.com> Link: https://lore.kernel.org/r/20210817180500.1253-10-ameynarkhede03@gmail.com Signed-off-by: Amey Narkhede <ameynarkhede03@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-08-17PCI: Add pcie_reset_flr() with 'probe' argumentAmey Narkhede1-3/+1
Most reset methods are of the form "pci_*_reset(dev, probe)". pcie_flr() was an exception because it relied on a separate pcie_has_flr() function instead of taking a "probe" argument. Add "pcie_reset_flr(dev, probe)" to follow the convention. Remove pcie_has_flr(). Some pcie_flr() callers that did not use pcie_has_flr() remain. [bhelgaas: commit log, rework pcie_reset_flr() to use dev->devcap directly] Link: https://lore.kernel.org/r/20210817180500.1253-3-ameynarkhede03@gmail.com Signed-off-by: Amey Narkhede <ameynarkhede03@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
2021-08-12crypto: hisilicon - enable hpre device clock gatingWeili Qian1-0/+63
Kunpeng930 hpre device supports dynamic clock gating. When doing tasks, the algorithm core is opened, and when idle, the algorithm core is closed. This patch enables hpre dynamic clock gating by writing hardware registers. Signed-off-by: Weili Qian <qianweili@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-08-12crypto: hisilicon - enable sec device clock gatingWeili Qian1-5/+41
Kunpeng930 sec device supports dynamic clock gating. When doing tasks, the algorithm core is opened, and when idle, the algorithm core is closed. This patch enables sec dynamic clock gating by writing hardware registers. Signed-off-by: Weili Qian <qianweili@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-08-12crypto: hisilicon - enable zip device clock gatingWeili Qian1-0/+26
Kunpeng930 zip device supports dynamic clock gating. When executing tasks, the algorithm core is opened, and when idle, the algorithm core is closed. This patch enables zip dynamic clock gating by writing hardware registers. Signed-off-by: Weili Qian <qianweili@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-08-12crypto: virtio - Replace deprecated CPU-hotplug functions.Sebastian Andrzej Siewior1-2/+2
The functions get_online_cpus() and put_online_cpus() have been deprecated during the CPU hotplug rework. They map directly to cpus_read_lock() and cpus_read_unlock(). Replace deprecated CPU-hotplug functions with the official version. The behavior remains unchanged. Cc: Gonglei <arei.gonglei@huawei.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: "David S. Miller" <davem@davemloft.net> Cc: virtualization@lists.linux-foundation.org Cc: linux-crypto@vger.kernel.org Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-08-12crypto: sun8i-ce - use kfree_sensitive to clear and free sensitive dataJason Wang2-8/+4
The kfree_sensitive is a kernel API to clear sensitive information that should not be leaked to other future users of the same memory objects and free the memory. Its function is the same as the combination of memzero_explicit and kfree. Thus, we can replace the combination APIs with the single kfree_sensitive API. Signed-off-by: Jason Wang <wangborong@cdjrlc.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-08-06crypto: ccp - shutdown SEV firmware on kexecBrijesh Singh2-26/+35
The commit 97f9ac3db6612 ("crypto: ccp - Add support for SEV-ES to the PSP driver") added support to allocate Trusted Memory Region (TMR) used during the SEV-ES firmware initialization. The TMR gets locked during the firmware initialization and unlocked during the shutdown. While the TMR is locked, access to it is disallowed. Currently, the CCP driver does not shutdown the firmware during the kexec reboot, leaving the TMR memory locked. Register a callback to shutdown the SEV firmware on the kexec boot. Fixes: 97f9ac3db6612 ("crypto: ccp - Add support for SEV-ES to the PSP driver") Reported-by: Lucas Nussbaum <lucas.nussbaum@inria.fr> Tested-by: Lucas Nussbaum <lucas.nussbaum@inria.fr> Cc: <stable@kernel.org> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Joerg Roedel <jroedel@suse.de> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Brijesh Singh <brijesh.singh@amd.com> Acked-by: Tom Lendacky <thomas.lendacky@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-08-06crypto: omap-sham - drop pm_runtime_irqsafe() usageTony Lindgren1-1/+0
Commit b0a3d8986a76 ("crypto: omap-sham - Use pm_runtime_irq_safe()") added the use of pm_runtime_irq_safe() as pm_runtime_get_sync() was called from a tasklet. We now use the crypto engine queue instead of a custom queue since commit 33c3d434d91 ("crypto: omap-sham - convert to use crypto engine"). We want to drop the use of pm_runtime_irq_safe() in general as it takes a permanent usage count on the parent device causing issues for power management. Based on testing with CONFIG_DEBUG_ATOMIC_SLEEP=y, modprobe omap-sham, followed by modprobe tcrypt sec=1 mode=423, I have not been able to reproduce the scheduling while atomic issue seen earlier with current kernels and we can just drop the call to pm_runtime_irq_safe(). Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Tero Kristo <kristo@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-08-06crypto: omap-sham - drop suspend and resume functionsTony Lindgren1-21/+0
Let's get rid of the suspend and resume calls to runtime PM as these calls do not idle the hardware. The runtime suspend has been disabled for system suspend since commit 88d26136a256 ("PM: Prevent runtime suspend during system resume"). Instead of runtime PM, the system suspend and resume functions should call driver internal shared functions to idle the hardware as needed. Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Tero Kristo <kristo@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-08-06crypto: omap-sham - drop old hw_init and unused FLAGS_INITTony Lindgren1-21/+5
FLAGS_INIT is now unused and we can just use standard runtime PM functions instead. Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Tero Kristo <kristo@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-08-06crypto: omap-sham - add missing pm_runtime_dontuse_autosuspend()Tony Lindgren1-0/+2
We should pair the usage of pm_runtime_use_autosuspend() with pm_runtime_dont_use_autosuspend(). Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Tero Kristo <kristo@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-08-06crypto: omap-sham - initialize req only after omap_sham_hw_init()Tony Lindgren1-2/+2
Let's only initialize dd->req after omap_sham_hw_init() in case of errors. Looks like leaving dd->req initialized on omap_sham_hw_init() errors is is not causing issues though as we return on errors. So this patch can be applied as clean-up. Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Tero Kristo <kristo@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-08-06crypto: omap-sham - clear dma flags only after omap_sham_update_dma_stop()Tony Lindgren1-1/+1
We should not clear FLAGS_DMA_ACTIVE before omap_sham_update_dma_stop() is done calling dma_unmap_sg(). We already clear FLAGS_DMA_ACTIVE at the end of omap_sham_update_dma_stop(). The early clearing of FLAGS_DMA_ACTIVE is not causing issues as we do not need to defer anything based on FLAGS_DMA_ACTIVE currently. So this can be applied as clean-up. Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Tero Kristo <kristo@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-18 21:50:02 +0300