| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
[ Upstream commit f8c9c57d750346abd213ffed2ae3cacb0268e9f1 ]
Since commit "gpu: host1x: Allow entries in BO caches to be freed",
host1x_bo_pin() and host1x_bo_unpin() handle the bo's refcount
themselves. .pin/.unpin callbacks should not adjust it.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 32b4d29280ed2a991dc196d5845b892acedc63b8 upstream.
Implementing the crypto_rng interface has no purpose, as it isn't used
in practice. It's being removed from other drivers too. Just remove
it. This leaves hwrng, which is actually used.
Tagging with 'Cc stable' due to the bugs that this removes:
- xtrng_trng_generate() sometimes returned success even when it didn't
fill in all the bytes.
- It was possible for xtrng_trng_generate() and
xtrng_hwrng_trng_read() to run concurrently and interfere with each
other, as the locking code in xtrng_hwrng_trng_read() was broken.
Fixes: 8979744aca80 ("crypto: xilinx - Add TRNG driver for Versal")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 9dbf173bd32d5f81b005008b682bfb50aa093455 ]
The sg_cleanup error path used list[i] instead of list[j] when unmapping
DMA buffers, leaking successfully mapped entries and repeatedly unmapping
the failed one.
Fixes: c694b233295b ("crypto: cavium - Add the Virtual Function driver for CPT")
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7891c64c0520519782470ba29bac8a5761e295d8 ]
The sg_cleanup path used list[i] instead of list[j] when unmapping DMA
buffers, leaking successfully mapped entries and repeatedly unmapping
the failed one.
Fixes: 10b4f09491bf ("crypto: marvell - add the Virtual Function driver for CPT")
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 50e506201bab875545c7a9443bd7e1c71804e553 ]
The PCIe r7.0, chapter "6.33.8 Other IDE Rules" mandates if selective IDE
is enabled for config requersts, a stream must be enabled on the endpoint
before enabling it on the rootport:
===
For Selective IDE, the Stream must not be used until it has been enabled in
both Partner Ports. For cases where one of the Partner Ports is a Root Port
and Selective IDE for Configuration Requests is enabled, the other
Partner Port must be enabled prior to the Root Port. For other scenarios,
the mechanisms to satisfy this requirement are implementation-specific.
===
Do what the spec says.
Fixes: 4be423572da1 ("crypto/ccp: Implement SEV-TIO PCIe IDE (phase1)")
Signed-off-by: Alexey Kardashevskiy <aik@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 690a5f9e5c972a580565ce544ed1627ccf1e84de ]
Ensure the ENOMEM error value is set when the input buffer allocation
fails in tegra_ccm_do_one_req.
Fixes: 1e245948ca0c ("crypto: tegra - finalize crypto req on error")
Reported-by: Vladislav Dronov <vdronov@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Vladislav Dronov <vdronov@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 03215b8457784540acc741e6331e355b62c6c8ab ]
When freeing a coherent DMA buffer, the size must match the value
that was used during the allocation.
Unfortunately the size field in the tegra driver gets overwritten
by this point so it no longer matches and creates a warning.
Fix this by saving a copy of the size on the stack.
Note that the ccm function actually mixes up the inbuf and outbuf
sizes, but it doesn't matter because the two sizes are actually
equal.
Fixes: 1cb328da4e8f ("crypto: tegra - Do not use fixed size buffers")
Reporeted-by: Patrick Talbert <ptalbert@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Vladislav Dronov <vdronov@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 85a61bf9145d4097c740ffcf3aa832d930a8913b ]
As the potential failure of the devm_request_threaded_irq(),
it should be better to check the return value and return
error if fails.
Fixes: 9739f5f93b78 ("crypto: eip93 - Add Inside Secure SafeXcel EIP-93 crypto engine support")
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e71dc5602b9a29027f6aedd5990d3e8c4f638c8c ]
Before function level reset, driver first disable device error report
and then waits for the device reset to complete. However, when the
error is recovered, the error bits will be enabled again, resulting in
invalid disable. It is modified to detect that there is no error
before disable error report, and then do FLR.
Fixes: 7ce396fa12a9 ("crypto: hisilicon - add FLR support")
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Zongyu Wu <wuzongyu1@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 09e6b79b8ce388993aec9ac91b1cb2c181c27bd9 ]
This patch fixes a descriptor ring reset. This causes a hang in the
driver's unload/load sequence.
Fixes: 9739f5f93b78 ("crypto: eip93 - Add Inside Secure SafeXcel EIP-93 crypto engine support")
Suggested-by: Benjamin Larsson <benjamin.larsson@genexis.eu>
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c36faca103a685590281412e47df74b550f71886 ]
The memory allocated for priv in safexcel_pci_probe() is not freed in the
error paths, as well as in the PCI remove function. Fix this by using
device managed allocation.
Fixes: 625f269a5a7a ("crypto: inside-secure - add support for PCI based FPGA development board")
Signed-off-by: Abdun Nihaal <nihaal@cse.iitm.ac.in>
Reviewed-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 930d9d36ea618a775985446a125aedeb401db522 ]
dsm_create() initially checks pdev->bus when computing segment_id:
u8 segment_id = pdev->bus ? pci_domain_nr(pdev->bus) : 0;
But the next two lines unconditionally dereference pdev->bus via
pcie_find_root_port() and especially pci_dev_id(pdev), which expands
to PCI_DEVID(dev->bus->number, dev->devfn). If pdev->bus is in fact
NULL, segment_id is initialised to 0 but the very next statement
crashes the kernel.
smatch flags this:
drivers/crypto/ccp/sev-dev-tsm.c:253 dsm_create() error: we
previously assumed 'pdev->bus' could be null (see line 251)
Make the NULL handling consistent: if pdev->bus is NULL the device
has no PCI context to work with and SEV TIO setup cannot proceed,
so return -ENODEV before any of the bus-dependent lookups. The
remaining initialisation now runs only on the path where pdev->bus
is known to be valid.
No change for callers where pdev->bus is non-NULL, which is the
only case where dsm_create() did meaningful work before this change.
Fixes: 4be423572da1 ("crypto/ccp: Implement SEV-TIO PCIe IDE (phase1)")
Signed-off-by: Stepan Ionichev <sozdayvek@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ef8c9dacda2871accd64e3eda951fef6b788b1ea ]
When handling a PDH export, treat a zero-length userspace cert chain buffer
as a request to query the length of the relevant blobs. Failure to account
for the zero-length buffer trips a BUG_ON() when running with
CONFIG_DEBUG_VIRTUAL=y due to trying to get the physical address of the
ZERO_SIZE_PTR (returned by kzalloc() on the bogus allocation).
kernel BUG at arch/x86/mm/physaddr.c:28 !
Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI
CPU: 30 UID: 0 PID: 28580 Comm: syz.2.18 Kdump: loaded
Tainted: G W 6.18.16-smp-DEV #1 NONE
Tainted: [W]=WARN
Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 12.62.0-0 11/19/2025
RIP: 0010:__phys_addr+0x16a/0x180 arch/x86/mm/physaddr.c:28
RSP: 0018:ffffc9008329fc80 EFLAGS: 00010293
RAX: ffffffff8179110a RBX: 0000778000000010 RCX: ffff8884e6992600
RDX: 0000000000000000 RSI: 0000000080000010 RDI: 0000778000000010
RBP: ffffc9008329fdf0 R08: 0000000000000dc0 R09: 00000000ffffffff
R10: dffffc0000000000 R11: fffffbfff126d297 R12: dffffc0000000000
R13: 1ffff92010653fc8 R14: 0000000080000010 R15: dffffc0000000000
FS: 0000555556bec9c0(0000) GS:ffff88aa4ce1c000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fd3159e7000 CR3: 00000004fbc44000 CR4: 0000000000350ef0
Call Trace:
<TASK>
[<ffffffff853d3869>] sev_ioctl_do_pdh_export+0x559/0x7a0 drivers/crypto/ccp/sev-dev.c:2308
[<ffffffff853d1fdd>] sev_ioctl+0x2cd/0x480 drivers/crypto/ccp/sev-dev.c:2556
[<ffffffff82549ebc>] vfs_ioctl fs/ioctl.c:52 [inline]
[<ffffffff82549ebc>] __do_sys_ioctl fs/ioctl.c:598 [inline]
[<ffffffff82549ebc>] __se_sys_ioctl+0xfc/0x170 fs/ioctl.c:584
[<ffffffff8630115f>] do_syscall_x64 arch/x86/entry/syscall_64.c:64 [inline]
[<ffffffff8630115f>] do_syscall_64+0x9f/0xf40 arch/x86/entry/syscall_64.c:98
[<ffffffff81000136>] entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7fd3158eac39
</TASK>
Thankfully, the bug is benign outside of CONFIG_DEBUG_VIRTUAL=y as getting
the physical address is just arithmetic, and the PSP errors out before
trying to write to the garbage address (which it must, otherwise querying
the blob lengths would clobber memory at pfn=0).
Fixes: 76a2b524a4b1 ("crypto: ccp: Implement SEV_PDH_CERT_EXPORT ioctl command")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 319400fc5ee15db5793aa45f854968141326effc ]
The blocking and non-blocking paths were failing to provide valid entropy
due to improper buffer management. Reading the buffer starting from byte 1,
only fetch the 32 bytes of random data from the return message.
Tested on an Atmel SHA204A device.
Before (here for blocking), tests showed repeatedly reading reduced bytes.
$ head -c 32 /dev/hwrng | hexdump -C
00000000 02 28 85 b3 47 40 f2 ee 00 00 00 00 00 00 00 00 |.(..G@..........|
00000010 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000020
After, the result will be similar to the following:
$ head -c 32 /dev/hwrng | hexdump -C
00000000 5a fc 3f 13 14 68 fe 06 68 0a bd 04 83 6e 09 69 |Z.?..h..h....n.i|
00000010 75 ff cf 87 10 84 3b c9 c1 df ae eb 45 53 4c c3 |u.....;.....ESL.|
00000020
Fixes: da001fb651b0 ("crypto: atmel-i2c - add support for SHA204A random number generator")
Suggested-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
Tested-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit fed613c1230277105bb512bce6e1fda8f316d178 ]
Sashiko notes:
> is the stack variable data left uninitialized when taking the else branch?
> Since data.tio_en is later evaluated unconditionally, could stack garbage
> cause it to evaluate to true, leading to erroneous attempts to allocate
> pages and initialize SEV-TIO on unsupported hardware?
If the firmware is too old to support SEV_INIT_EX, data is left
uninitialized but used in the debug logging about whether TIO is enabled or
not.
Fixes: 4be423572da1 ("crypto/ccp: Implement SEV-TIO PCIe IDE (phase1)")
Reported-by: Sashiko
Assisted-by: Gemini:gemini-3.1-pro-preview
Link: https://sashiko.dev/#/patchset/20260324161301.1353976-1-tycho%40kernel.org
Signed-off-by: Tycho Andersen (AMD) <tycho@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a8d5370eef00eca132a292b1901c9914c817e385 ]
Sashiko notes:
> if __snp_alloc_firmware_pages() returns NULL under memory pressure, is it
> safe to pass it directly to page_address()?
>
> On architectures without HASHED_PAGE_VIRTUAL, page_address(NULL) might
> compute a deterministic but invalid, non-zero virtual address. The
> subsequent if (tio_status) check would then evaluate to true, and
> sev_tsm_init_locked() would dereference the invalid pointer.
Indeed, page_address(NULL) will return non-NULL garbage here. Fix this by
checking the page allocation itself for NULL, not the resulting virtual
address.
Fixes: 4be423572da1 ("crypto/ccp: Implement SEV-TIO PCIe IDE (phase1)")
Reported-by: Sashiko
Assisted-by: Gemini:gemini-3.1-pro-preview
Link: https://sashiko.dev/#/patchset/20260324161301.1353976-1-tycho%40kernel.org
Signed-off-by: Tycho Andersen (AMD) <tycho@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1b864b6cb213bbd7b406e9b2e98c962077f300df ]
Sashiko notes:
> regarding the bounds check in snp_filter_reserved_mem_regions()
> called via walk_iomem_res_desc(): does the check
> if ((range_list->num_elements * 16 + 8) > PAGE_SIZE)
> allow an off-by-one heap buffer overflow?
>
> If range_list->num_elements is 255, 255 * 16 + 8 = 4088, which is <= 4096.
> Writing range->base (8 bytes) fills 4088-4095, but writing range->page_count
> (4 bytes) would write to 4096-4099, overflowing the kzalloc-allocated
> PAGE_SIZE buffer.
Fix this by accounting for the entry about to be written to, in addition to
the entries that are already allocated.
Fixes: 1ca5614b84ee ("crypto: ccp: Add support to initialize the AMD-SP for SEV-SNP")
Reported-by: Sashiko
Assisted-by: Gemini:gemini-3.1-pro-preview
Link: https://sashiko.dev/#/patchset/20260324161301.1353976-1-tycho%40kernel.org
Signed-off-by: Tycho Andersen (AMD) <tycho@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4a76a164ba1617f60d1c8a2fd754466c9d9e48e9 ]
Before SNP x86 shutdown [1], all HV_FIXED pages were always leaked on
module unload. Now pages can be reclaimed if they are freed before SNP
shutdown.
The SFS driver does sfs_dev_destroy() -> snp_free_hv_fixed_pages(), marking
the command buffer as free. But this happens after sev_dev_destroy() in
psp_dev_destroy(), so the pages are always leaked.
Rearrange psp_dev_destroy() to destroy things in the reverse order from
psp_init(), so that any dependencies can be unwound accordingly. This lets
SFS free the page and the subsequent SNP shutdown release it.
This was identified with use of Chris Mason's review-prompts:
https://github.com/masoncl/review-prompts
[1]: https://lore.kernel.org/all/20260324161301.1353976-1-tycho@kernel.org/
Fixes: 648dbccc03a0 ("crypto: ccp - Add AMD Seamless Firmware Servicing (SFS) driver")
Reported-by: review-prompts
Assisted-by: Claude:claude-4.6-opus
Suggested-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Tycho Andersen (AMD) <tycho@kernel.org>
Reviewed-by: Ashish Kalra <ashish.kalra@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2e96024632b386c86860aa78639940fc96d6fcc9 ]
The current implementation of the heartbeat error injection uses
adf_disable_arb_thd() to stop a specific accelerator engine thread
from processing requests. This does not reliably prevent the device
from generating responses.
Fix the error injection by disabling the device arbiter through
exit_arb() instead. This properly simulates a device failure by
stopping all arbitration, which results in missing responses for
sent requests.
Remove the now unused adf_disable_arb_thd() function and its
declaration.
Fixes: e2b67859ab6e ("crypto: qat - add heartbeat error simulator")
Signed-off-by: Damian Muszynski <damian.muszynski@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit b2c41fa9dd8fc740c489e060b199165771f268d1 upstream.
Remove sun4i_ss_rng, as it is insecure and unused:
- It has multiple vulnerabilities. sun4i_ss_prng_seed() is missing
locking and has a buffer overflow. sun4i_ss_prng_generate() fails to
fill the entire buffer with cryptographic random bytes, because it
rounds the destination length down and also doesn't actually wait for
the hardware to be ready before pulling bytes from it.
- No user of this code is known. It's usable only theoretically via the
"rng" algorithm type of AF_ALG. But userspace actually just uses the
actual Linux RNG (/dev/random etc) instead. And rng_algs don't
contribute entropy to the actual Linux RNG either. (This may have
been confused with hwrng, which does contribute entropy.)
The sun4i_ss_prng_seed() buffer overflow was reported by Tianchu Chen
and discovered by Atuin - Automated Vulnerability Discovery Engine
There's no point in fixing all these vulnerabilities individually when
this is unused code, so let's just remove it.
Fixes: b8ae5c7387ad ("crypto: sun4i-ss - support the Security System PRNG")
Cc: stable@vger.kernel.org
Reported-by: Tianchu Chen <flynnnchen@tencent.com>
Closes: https://lore.kernel.org/r/af749a8447bd7f0e9dd26ca6c87e9c6afecb09d9@linux.dev/
Acked-by: Corentin LABBE <clabbe.montjoie@gmail.com>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 6e12daff6ec125102a6fdcafc5aa7199f7ce8933 upstream.
The problem described in commit 655ef638a2bc ("crypto: talitos - fix
SEC1 32k ahash request limitation") also apply for the SEC2 hardware,
but with a limitation of 64k - 1 bytes.
Split ahash_done() into SEC1 and SEC2 paths: SEC1 continues to free the
whole descriptor list at once, while SEC2 now iterates through
descriptors one by one, submitting the next only after the previous
completes, which is required since SEC2 cannot chain descriptors in
hardware.
Cc: stable@vger.kernel.org
Fixes: c662b043cdca ("crypto: af_alg/hash: Support MSG_SPLICE_PAGES")
Signed-off-by: Paul Louvel <paul.louvel@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 907ae6088c82c9abae2d26477fddd60df6ad003b upstream.
ahash_process_req() was a wrapper used in commit 655ef638a2bc ("crypto:
talitos - fix SEC1 32k ahash request limitation"). Rename
ahash_process_req_one() to ahash_process_req() and remove the wrapper.
Cc: stable@vger.kernel.org
Signed-off-by: Paul Louvel <paul.louvel@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8bcf00671400ac3b3a4cc3011e6c1496dbd880fd upstream.
In talitos_ahash_req_ctx and talitos_export_state, the fields
first_desc and last_desc describe request-level (not descriptor-level)
state. Rename them to first_request and last_request for clarity.
last_desc is also removed from talitos_ahash_req_ctx as it is no
longer used.
Cc: stable@vger.kernel.org
Signed-off-by: Paul Louvel <paul.louvel@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit be4802afb1700534e48cb776d0d1e772c27de130 upstream.
Now that SEC1 hash uses hardware descriptor chaining instead of a
workqueue to process requests exceeding TALITOS1_MAX_DATA_LEN, the
workqueue code is no longer needed.
Remove sec1_ahash_process_remaining(), the related fields from
talitos_ahash_req_ctx (request_bufsl, areq, request_sl,
remaining_ahash_request_bytes, current_ahash_request_bytes,
sec1_ahash_process_remaining), the dead code in ahash_done(), and
simplify ahash_process_req() to call ahash_process_req_one() directly
with the original areq->src and areq->nbytes.
Cc: stable@vger.kernel.org
Signed-off-by: Paul Louvel <paul.louvel@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f1ede6d95d8ad3b32c6a552d2baab805bd00fc38 upstream.
Rework the SEC1 ahash implementation to build a chain of hardware
descriptors, replacing the previous approach of submitting one
descriptor at a time via a workqueue, introduced by commit 655ef638a2bc
("crypto: talitos - fix SEC1 32k ahash request limitation").
Introduce ahash_process_req_prepare() which iterates over the request
data, allocating enough descriptors to cover the entire ahash request.
The new fields (bufsl, src, first, last) are added to talitos_edesc for
this purpose.
common_nonsnoop_hash() no longer calls talitos_submit(); it only
maps and sets up the descriptor. Submission is now done by the caller
after the chain is built.
ahash_free_desc_list_from() takes over calling
common_nonsnoop_hash_unmap() for each descriptor during cleanup.
Compared to the workqueue based solution, request are slightly faster
since there is no more scheduling latency induced by the workqueue, and
only one interrupt is generated by the device at the end of a chain.
Commit 655ef638a2bc ("crypto: talitos - fix SEC1 32k ahash request
limitation") :
$ /usr/libexec/libkcapi/sha256sum ./test_5M.bin
013c5609d63c... ./test_5M.bin
real 0m 0.41s
user 0m 0.01s
sys 0m 0.07s
Now :
$ /usr/libexec/libkcapi/sha256sum ./test_5M.bin
013c5609d63c... ./test_5M.bin
real 0m 0.33s
user 0m 0.01s
sys 0m 0.20s
Tested on a system with an MPC885 SoC featuring the SEC1 Lite.
The increase in sys time is due to the fact that commit 37b5e8897eb5
("crypto: talitos - chain in buffered data for ahash on SEC1") can no
longer be applied.
Cc: stable@vger.kernel.org
Signed-off-by: Paul Louvel <paul.louvel@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
descriptor
commit 59b5d899e33701665f18abe6bebf987427876e3e upstream.
Currently, when SEC1 has buffered data (nbuf != 0), the ahash code
creates an additional descriptor on the fly inside
common_nonsnoop_hash() to handle the remainder of the data. This
approach is incompatible with the arbitrary-length descriptor chaining
that follows.
Remove the "additional descriptor" logic from common_nonsnoop_hash()
and common_nonsnoop_hash_unmap().
Also remove the nbytes adjustment for SEC1 in ahash_edesc_alloc()
that subtracted nbuf.
Cc: stable@vger.kernel.org
Signed-off-by: Paul Louvel <paul.louvel@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f8713d9e6091755dd30f7f1cfa25f8440cddf81b upstream.
Previously added code in current_desc_hdr() in order to add support for
searching an offending descriptor inside a descriptor chain.
Move that code into a standalone function to improve readability.
Cc: stable@vger.kernel.org
Signed-off-by: Paul Louvel <paul.louvel@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
standalone dma_map_request() function
commit 5c0aa8cad7745505297103f05dda3fa06e8ac670 upstream.
Previously added code to talitos_submit() in order to map an entire
descriptor chain.
Move that code into a standalone function to improve readability.
Cc: stable@vger.kernel.org
Signed-off-by: Paul Louvel <paul.louvel@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
standalone dma_unmap_request() function
commit 4d9b0b7415b9e79a3d54d18b5ff230974ea78740 upstream.
Previously added code to flush_channel() in order to unmap an entire
descriptor.
Move that code into a standalone function to improve readability.
Cc: stable@vger.kernel.org
Signed-off-by: Paul Louvel <paul.louvel@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f126384ed55279c3b676f89d5ab547b8de8df782 upstream.
The SEC1 hardware can process a chain of descriptors without host
intervention. Only the hash implementation currently use this feature,
but with a chain of at most 2 descriptors added in commit 37b5e8897eb5
("crypto: talitos - chain in buffered data for ahash on SEC1").
Add supports for chaining an arbitrary number of descriptors in a chain.
Adapt the ahash implementation to make it compatible.
Cc: stable@vger.kernel.org
Signed-off-by: Paul Louvel <paul.louvel@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e17ff3d6ff907dc8406261e8fd3e1fc8a908f0f6 upstream.
In order to know if a descriptor has been processed by the device,
the driver polls the FIFO to see if DESC_HDR_DONE is set on a descriptor
header to confirm completion.
The current code does not make sure that the CPU gets up to date data
before reading the descriptor.
Fix this by calling dma_sync_single_for_cpu() before reading memory
written by the device.
Cc: stable@vger.kernel.org
Fixes: 58cdbc6d2263 ("crypto: talitos - fix hash on SEC1.")
Signed-off-by: Paul Louvel <paul.louvel@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 56707afb92fee371c0f2e04332c9aa03cdb89793 upstream.
Move the shutdown and recovery sequences out of adf_error_detected()
and adf_slot_reset() into reset_prepare() and reset_done() helpers.
This makes the AER recovery path easier to follow and prepares the
common reset flow for reuse by additional PCI reset callbacks without
duplicating the logic.
No functional change intended.
Cc: stable@vger.kernel.org
Signed-off-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Damian Muszynski <damian.muszynski@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b3ac78756588059729b9195fcc9f4b37d54057a5 upstream.
The generic RSA key parser (rsa_helper.c) bounds each CRT component (p,
q, dp, dq, qinv) by the modulus size n_sz, but qat_rsa_setkey_crt()
allocates half-size DMA buffers (key_sz / 2) and right-aligns each
component with:
memcpy(dst + half_key_sz - len, src, len)
When a CRT component is larger than half_key_sz the subtraction
underflows and memcpy writes past the DMA buffer, causing memory
corruption.
Add a len > half_key_sz check next to the existing !len check for each
of the five CRT components so the driver falls back to the non-CRT path
instead of writing out of bounds.
Fixes: 879f77e9071f ("crypto: qat - Add RSA CRT mode")
Cc: stable@vger.kernel.org
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Laurent M Coquerel <laurent.m.coquerel@intel.com>
Tested-by: Laurent M Coquerel <laurent.m.coquerel@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9676657117b79f88c22875680c36d7da84b75eca upstream.
Skip the shutdown and restart flow when adf_slot_reset() is entered
for a device that is already down. In that case, leave
ADF_STATUS_RESTARTING clear and let adf_slot_reset() restore PCI
function state without calling adf_dev_up(), re-enabling SR-IOV, or
sending restarted notifications.
This is in preparation for adding reset_prepare() and reset_done()
callbacks in adf_aer.c.
Cc: stable@vger.kernel.org
Signed-off-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5c6f845e77ec35f9b7b047cc8f9789bf397cdd3e upstream.
The service_table list is protected by service_lock when entries are
added or removed (in adf_service_add() and adf_service_remove()), but
several functions iterate over the list without holding this lock.
A concurrent adf_service_register() or adf_service_unregister() call
could modify the list during traversal, leading to list corruption or
a use-after-free.
Fix this by holding service_lock across all list_for_each_entry()
iterations of service_table in adf_dev_init(), adf_dev_start(),
adf_dev_stop(), adf_dev_shutdown(), adf_dev_restarting_notify(),
adf_dev_restarted_notify(), and adf_error_notifier().
The lock ordering is safe: callers of the static helpers (adf_dev_up()
and adf_dev_down()) acquire state_lock before service_lock, and no
event_hld callback or service_lock holder ever acquires state_lock in
the reverse order.
Cc: stable@vger.kernel.org
Fixes: d8cba25d2c68 ("crypto: qat - Intel(R) QAT driver framework")
Signed-off-by: Ahsan Atta <ahsan.atta@intel.com>
Co-developed-by: Maksim Lukoshkov <maksim.lukoshkov@intel.com>
Signed-off-by: Maksim Lukoshkov <maksim.lukoshkov@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6931835f2fdd0cb9b1c7791748d7e67d0749056a upstream.
Send fatal error notifications to subsystems and VFs as soon as
AER error detection starts, before entering the reset preparation
shutdown sequence.
This reduces notification latency and ensures peers are informed
immediately on fatal detection, rather than after restart-state setup
and arbitration teardown.
Cc: stable@vger.kernel.org
Signed-off-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Damian Muszynski <damian.muszynski@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 57518500053987672050dc2f7bf8a774d5d52fd9 upstream.
When a reset is triggered via sysfs, the PCI core invokes the
reset_prepare() callback while holding pci_dev_lock(), which includes
the PCI configuration space access semaphore. If reset_prepare() calls
adf_dev_down(), the call chain adf_dev_stop() -> adf_disable_sriov()
-> pci_disable_sriov() attempts to acquire the same semaphore,
resulting in a deadlock.
Avoid this by skipping pci_disable_sriov() when ADF_STATUS_RESTARTING
is set. During reset the PCI topology is preserved, so VF devices
remain valid and enumerated across the reset. VF notification and the
quiesce handshake via adf_pf2vf_notify_restarting() are still
performed unconditionally so that VFs stop submitting work before the
PF shuts down.
Correspondingly, skip pci_enable_sriov() in adf_enable_sriov() when
VFs are already present, since their PCI devices were preserved from
before the restart.
This is in preparation for adding reset_prepare() and reset_done()
callbacks in adf_aer.c.
Cc: stable@vger.kernel.org
Signed-off-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Damian Muszynski <damian.muszynski@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 4627ef7019bc532f992c0723e881811ce12f0a02 upstream.
A reset requested through /sys/bus/pci/devices/.../reset invokes the
driver reset_prepare() and reset_done() callbacks. The QAT driver does
not implement those callbacks today, so the reset proceeds without
quiescing the device or bringing it back up afterward, which leaves
the device unusable.
Hook reset_prepare() and reset_done() into adf_err_handler so the
common shutdown and recovery flow also runs for reset. Skip device
quiesce if the device is already in a down state.
Cc: stable@vger.kernel.org
Signed-off-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Damian Muszynski <damian.muszynski@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7d3ed20f7e46b3e991936fedd7a28f3ff4aec8d2 upstream.
In adf_dev_aer_schedule_reset(), ADF_STATUS_RESTARTING is set before
allocating reset_data. If the allocation fails, the function returns
-ENOMEM without queuing reset work, so nothing ever clears the bit.
This leaves the device permanently stuck in the restarting state,
causing all subsequent reset attempts to be silently skipped.
Fix this by using test_and_set_bit() to atomically claim the
RESTARTING state, preventing duplicate reset scheduling races under
concurrent fatal error reporting. If the subsequent allocation fails,
clear the bit to restore clean state so future reset attempts can
proceed.
Cc: stable@vger.kernel.org
Fixes: d8cba25d2c68 ("crypto: qat - Intel(R) QAT driver framework")
Signed-off-by: Ahsan Atta <ahsan.atta@intel.com>
Co-developed-by: Maksim Lukoshkov <maksim.lukoshkov@intel.com>
Signed-off-by: Maksim Lukoshkov <maksim.lukoshkov@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e5712ff82947dd02d118cee119ed36cec671d814 upstream.
QAT driver currently toggles PCI bus mastering in multiple places
(probe paths, and reset callbacks). This makes BME state depend on
call ordering and on what PCI command bits were captured in saved PCI
config state.
Make BME control explicit and deterministic:
- remove pci_set_master() from device-specific probe paths
- add adf_set_bme() and call it from adf_dev_init() so BME is enabled
at one point before device bring-up
- drop redundant pci_set_master() and pci_clear_master from adf_aer.c
and rely on the unified init path for BME enablement
This is in preparation for adding reset_prepare() and reset_done()
hooks. In the PCI reset callback flow, the PCI core saves and
restores device configuration state around reset_prepare() and
reset_done(). This change is needed to ensure that we are able to
properly shutdown or reinitialize the device post sysfs triggered
resets.
Cc: stable@vger.kernel.org
Signed-off-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Suggested-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 08f0e65e784c4b20e6e620dd4f68d8636073a3d2 upstream.
Sashiko notes:
> if SEV initialization fails and KVM is actively running normal VMs, could a
> userspace process trigger this code path via /dev/sev ioctls (e.g.,
> SEV_PDH_GEN) and zero out MSR_VM_HSAVE_PA globally? Would the next VMRUN
> execution for an active VM trigger a general protection fault and crash the
> host?
Refuse to re-try initialization if SNP is not already initialized for
SNP_CONFIG.
This is technically an ABI break: before if SNP initialization failed it
could be transparently retriggered by this ioctl, and if no VMs were
running, everything worked fine. Hopefully this is enough of a corner case
that nobody will notice, but someone does, there are a few options:
* do something like symbol_get() for kvm and refuse to initialize if KVM is
loaded
* check each cpu's HSAVE_PA for non-zero data before re-initializing
* once initialization has failed, continue to refuse to initialize until
the ccp module is unloaded
Fixes: ceac7fb89e8d ("crypto: ccp - Ensure implicit SEV/SNP init and shutdown in ioctls")
Reported-by: Sashiko
Assisted-by: Gemini:gemini-3.1-pro-preview
Link: https://sashiko.dev/#/patchset/20260324161301.1353976-1-tycho%40kernel.org
CC: <stable@vger.kernel.org>
Signed-off-by: Tycho Andersen (AMD) <tycho@kernel.org>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f91e9dbb5845d1e5abf1028e6df57dcf61583e1b upstream.
Sashiko notes:
> if SEV initialization fails and KVM is actively running normal VMs, could a
> userspace process trigger this code path via /dev/sev ioctls (e.g.,
> SEV_PDH_GEN) and zero out MSR_VM_HSAVE_PA globally? Would the next VMRUN
> execution for an active VM trigger a general protection fault and crash the
> host?
The SEV firmware docs for SNP_VLEK_LOAD note:
> On SNP_SHUTDOWN, the VLEK is deleted.
That is, the initialization/shutdown wrapper here is pointless, because the
firmware immediately throws away the key anyway. Instead, refuse to do
anything if SNP has not been previously initialized.
This is an ABI break: before, this was a no-op and almost certainly a
mistake by userspace, and now it returns -ENODEV. ABI compatibility could be
maintained here by simply returning 0 in the check instead.
Fixes: ceac7fb89e8d ("crypto: ccp - Ensure implicit SEV/SNP init and shutdown in ioctls")
Reported-by: Sashiko
Assisted-by: Gemini:gemini-3.1-pro-preview
Link: https://sashiko.dev/#/patchset/20260324161301.1353976-1-tycho%40kernel.org
CC: <stable@vger.kernel.org>
Signed-off-by: Tycho Andersen (AMD) <tycho@kernel.org>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5a1364da2f04217a36e2fdfa2db4ee025b383a20 upstream.
Sashiko notes:
> if SEV initialization fails and KVM is actively running normal VMs, could a
> userspace process trigger this code path via /dev/sev ioctls (e.g.,
> SEV_PDH_GEN) and zero out MSR_VM_HSAVE_PA globally? Would the next VMRUN
> execution for an active VM trigger a general protection fault and crash the
> host?
The SNP_COMMIT command does not require the firmware to be in any
particular state. Skip initializing it if it was previously uninitialized.
The SEV-SNP firmware specification doc 56860 does not mention SNP_COMMIT in
Table 5 as a command that is allowed in the UNINIT state, but it is in fact
allowed and a future documentation update will reflect that.
Fixes: ceac7fb89e8d ("crypto: ccp - Ensure implicit SEV/SNP init and shutdown in ioctls")
Reported-by: Sashiko
Assisted-by: Gemini:gemini-3.1-pro-preview
Link: https://sashiko.dev/#/patchset/20260324161301.1353976-1-tycho%40kernel.org
CC: <stable@vger.kernel.org>
Signed-off-by: Tycho Andersen (AMD) <tycho@kernel.org>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit fb1758e74b8061aacfbce7bbb7a7cc650537e167 upstream.
Sashiko notes:
> if SEV initialization fails and KVM is actively running normal VMs, could a
> userspace process trigger this code path via /dev/sev ioctls (e.g.,
> SEV_PDH_GEN) and zero out MSR_VM_HSAVE_PA globally? Would the next VMRUN
> execution for an active VM trigger a general protection fault and crash the
> host?
sev_move_to_init_state() is called for ioctls requiring only SEV firmware:
SEV_PEK_GEN, SEV_PDH_GEN, SEV_PEK_CSR, SEV_PEK_CERT_IMPORT, and
SEV_PDH_CERT_EXPORT. After the firmware command, it does SEV_SHUTDOWN on
the SEV firmware. Since these commands do not require SNP to be
initialized, skip it by calling __sev_platform_init_locked() which only
initializes the SEV firmware. This way SNP is not Initialized at all, and
HSAVE_PA is not cleared.
The previous code saved any SEV initialization firmware error to
init_args.error and then threw it away and hardcoded the return value of
INVALID_PLATFORM_STATE regardless of the real firmware error. This patch
changes it to surface the underlying error, which is hopefully both more
useful and doesn't cause any problems.
Note that it is still safe to call __sev_firmware_shutdown() directly: it
calls __sev_snp_shutdown_locked(), which skips SNP shutdown if SNP was not
initialized.
Fixes: ceac7fb89e8d ("crypto: ccp - Ensure implicit SEV/SNP init and shutdown in ioctls")
Reported-by: Sashiko
Assisted-by: Gemini:gemini-3.1-pro-preview
Link: https://sashiko.dev/#/patchset/20260324161301.1353976-1-tycho%40kernel.org
CC: <stable@vger.kernel.org>
Signed-off-by: Tycho Andersen (AMD) <tycho@kernel.org>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit af3d1bb9a09daf928fc3f173689fb7904d6a6d4f upstream.
The loongson-rng rng_alg has several vulnerabilities, including not
providing forward security, and a use-after-free bug due to the use of
wait_for_completion_interruptible().
Meanwhile, the rng_alg framework doesn't really have any purpose in the
first place other than to access the software algorithms crypto/drbg.c
and crypto/jitterentropy.c. Hardware-specific rng_algs have no
in-kernel user, and unlike hwrng there's no feed into the actual Linux
RNG. As such, there's really no point to this code. There are of
course other rng_alg drivers that are similarly unused, but they're
similarly in the process of being phased out, e.g.
https://lore.kernel.org/r/20260529193648.18172-1-ebiggers@kernel.org and
https://lore.kernel.org/r/20260529220430.34135-1-ebiggers@kernel.org
Given that, there's no point in fixing forward these vulnerabilities,
and it makes much more sense to simply roll back the addition of this
driver. If this platform provides TRNG (not PRNG) functionality, it
could make sense to add a hwrng driver, but it would be quite different.
Link: https://lore.kernel.org/linux-crypto/20260525145939.GC2018@quark/
Fixes: 766b2d724c8d ("crypto: loongson - add Loongson RNG driver support")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 4c600ab0d8cfc9d75b92f3426dbcb2ad85eac91d upstream.
This driver registers a rng_alg, so it requires CRYPTO_RNG.
Fixes: 766b2d724c8d ("crypto: loongson - add Loongson RNG driver support")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202605201622.qWOiiZTV-lkp@intel.com/
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6ea0ce3a19f9c37a014099e2b0a46b27fa164564 upstream.
The timeout error path in tegra_se_host1x_submit() returns without
calling host1x_job_put(), while all other paths (success, submit
error, pin error) properly release the job reference through the
job_put label. Since host1x_job_alloc() initializes the reference
count and host1x_job_put() is required to drop it, omitting it on
timeout causes a permanent refcount leak.
Fix this by redirecting the timeout return to the existing job_put
label, ensuring the job reference and any associated syncpt
references are consistently released.
Cc: stable@vger.kernel.org
Fixes: 0880bb3b00c8 ("crypto: tegra - Add Tegra Security Engine driver")
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Reviewed-by: Akhil R <akhilrajeev@nvidia.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 216a7795ec210bdabd5dad42323eee70bbfc8d90 upstream.
drivers/crypto/hisilicon/trng/trng.c exposes the same hardware through
two completely separate interfaces, crypto_rng and hwrng. However, the
implementation of this is buggy because it permits generation operations
from these interfaces to run concurrently with each other, accessing the
same registers. That is, hisi_trng_generate() synchronizes with itself
but not with hisi_trng_read(). This results in potential repetition of
output from the RNG, output of non-random values, etc.
Fortunately, there's actually no point in hardware RNG drivers
implementing the crypto_rng interface. It's not actually used by
anything besides the "rng" algorithm type of AF_ALG, which in turn is
not actually used in practice. Other crypto_rng hardware drivers are
likewise being phased out, leaving just the hwrng support.
Thus, remove it to simplify the code and avoid conflict (and confusion)
with the hwrng interface which is the one that actually matters.
Fixes: e4d9d10ef4be ("crypto: hisilicon/trng - add support for PRNG")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7811ec9e973d2c9e465083699f0c8240b98cb8c4 upstream.
Remove crypto4xx_rng, as it is insecure and unused:
- It has only a 64-bit security strength, which is highly inadequate.
This can be seen by the fact that crypto4xx_hw_init() seeds it with
only 64 bits of entropy, and the fact that the original commit
mentions that it implements ANSI X9.17 Annex C.
Another issue was that this driver didn't implement the crypto_rng API
correctly, as crypto4xx_prng_generate() didn't return 0 on success.
- No user of this code is known. It's usable only theoretically via the
"rng" algorithm type of AF_ALG. But userspace actually just uses the
actual Linux RNG (/dev/random etc) instead. And rng_algs don't
contribute entropy to the actual Linux RNG either. (This may have
been confused with hwrng, which does contribute entropy.)
Fixes: d072bfa48853 ("crypto: crypto4xx - add prng crypto support")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Acked-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8005dc808bcce7d6cc2ae015a3cde1683bee602d upstream.
Use print_hex_dump_devel() for dumping sensitive key material in
*_setkey() to avoid leaking secrets at runtime when CONFIG_DYNAMIC_DEBUG
is enabled.
Fixes: 8d818c105501 ("crypto: caam/qi2 - add DPAA2-CAAM driver")
Fixes: 226853ac3ebe ("crypto: caam/qi2 - add skcipher algorithms")
Cc: stable@vger.kernel.org
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
