| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
gcc warns that the length for the extra unaligned data in the hash
function may be used unaligned. In theory this could happen if
we pass a zero-length sg_list, or if sg_is_last() was never true:
In file included from drivers/crypto/stm32/stm32-hash.c:23:
drivers/crypto/stm32/stm32-hash.c: In function 'stm32_hash_one_request':
include/uapi/linux/kernel.h:12:49: error: 'ncp' may be used uninitialized in this function [-Werror=maybe-uninitialized]
#define __KERNEL_DIV_ROUND_UP(n, d) (((n) + (d) - 1) / (d))
Neither of these can happen in practice, so the warning is harmless.
However while trying to suppress the warning, I noticed multiple
problems with that code:
- On big-endian kernels, we byte-swap the data like we do for
register accesses, however this is a data stream and almost
certainly needs to use a single writesl() instead of series
of writel() to give the correct hash.
- If the length is not a multiple of four bytes, we skip the
last word entirely, since we write the truncated length
using stm32_hash_set_nblw().
- If we change the code to round the length up rather than
down, the last bytes contain stale data, so it needs some
form of padding.
This tries to address all four problems, by correctly
initializing the length to zero, using endian-safe copy
functions, adding zero-padding and passing the padded length.
I have done no testing on this patch, so please review
carefully and if possible test with an unaligned length
and big-endian kernel builds.
Fixes: 8a1012d3f2ab ("crypto: stm32 - Support for STM32 HASH module")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Without CONFIG_DEBUG_FS, we get a harmless warning:
drivers/crypto/axis/artpec6_crypto.c:352:23: error: 'dbgfs_root' defined but not used [-Werror=unused-variable]
This moves it into the #ifdef that hides the only user.
Fixes: a21eb94fc4d3 ("crypto: axis - add ARTPEC-6/7 crypto accelerator driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Lars Persson <larper@axis.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
When built using multi_v7_defconfig, driver does not work on LS1021A:
[...]
caam 1700000.crypto: can't identify CAAM ipg clk: -2
caam: probe of 1700000.crypto failed with error -2
[...]
It turns out we have to detect at runtime whether driver is running
on an i.MX platform or not.
Cc: <stable@vger.kernel.org>
Fixes: 6c3af9559352 ("crypto: caam - add support for LS1021A")
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
All older compiler versions up to gcc-4.9 produce these
harmless warnings:
drivers/crypto/inside-secure/safexcel_cipher.c:389:9: warning: missing braces around initializer [-Wmissing-braces]
drivers/crypto/inside-secure/safexcel_cipher.c:389:9: warning: (near initialization for ‘result.completion’) [-Wmissing-braces]
drivers/crypto/inside-secure/safexcel_hash.c:422:9: warning: missing braces around initializer [-Wmissing-braces]
drivers/crypto/inside-secure/safexcel_hash.c:422:9: warning: (near initialization for ‘result.completion’) [-Wmissing-braces]
This changes the syntax to something that works on all versions
without warnings.
Fixes: 1b44c5a60c13 ("crypto: inside-secure - add SafeXcel EIP197 crypto engine driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Today, md5sum fails with error -ENOKEY because a setkey
function is set for non hmac hashing algs, see strace output below:
mmap(NULL, 378880, PROT_READ, MAP_SHARED, 6, 0) = 0x77f50000
accept(3, 0, NULL) = 7
vmsplice(5, [{"bin/\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 378880}], 1, SPLICE_F_MORE|SPLICE_F_GIFT) = 262144
splice(4, NULL, 7, NULL, 262144, SPLICE_F_MORE) = -1 ENOKEY (Required key not available)
write(2, "Generation of hash for file kcap"..., 50) = 50
munmap(0x77f50000, 378880) = 0
This patch ensures that setkey() function is set only
for hmac hashing.
Cc: <stable@vger.kernel.org>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
md5sum on some files gives wrong result
Exemple:
With the md5sum from libkcapi:
c15115c05bad51113f81bdaee735dd09 test
With the original md5sum:
bbdf41d80ba7e8b2b7be3a0772be76cb test
This patch fixes this issue
Cc: <stable@vger.kernel.org>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Kernel crypto tests report the following error at startup
[ 2.752626] alg: hash: Test 4 failed for sha224-talitos
[ 2.757907] 00000000: 30 e2 86 e2 e7 8a dd 0d d7 eb 9f d5 83 fe f1 b0
00000010: 2d 5a 6c a5 f9 55 ea fd 0e 72 05 22
This patch fixes it
Cc: <stable@vger.kernel.org>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Pull dmaengine updates from Vinod Koul:
"This one features the usual updates to the drivers and one good part
of removing DA_SG from core as it has no users.
Summary:
- Remove DMA_SG support as we have no users for this feature
- New driver for Altera / Intel mSGDMA IP core
- Support for memset in dmatest and qcom_hidma driver
- Update for non cyclic mode in k3dma, bunch of update in bam_dma,
bcm sba-raid
- Constify device ids across drivers"
* tag 'dmaengine-4.14-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (52 commits)
dmaengine: sun6i: support V3s SoC variant
dmaengine: sun6i: make gate bit in sun8i's DMA engines a common quirk
dmaengine: rcar-dmac: document R8A77970 bindings
dmaengine: xilinx_dma: Fix error code format specifier
dmaengine: altera: Use macros instead of structs to describe the registers
dmaengine: ti-dma-crossbar: Fix dra7 reserve function
dmaengine: pl330: constify amba_id
dmaengine: pl08x: constify amba_id
dmaengine: bcm-sba-raid: Remove redundant SBA_REQUEST_STATE_COMPLETED
dmaengine: bcm-sba-raid: Explicitly ACK mailbox message after sending
dmaengine: bcm-sba-raid: Add debugfs support
dmaengine: bcm-sba-raid: Remove redundant SBA_REQUEST_STATE_RECEIVED
dmaengine: bcm-sba-raid: Re-factor sba_process_deferred_requests()
dmaengine: bcm-sba-raid: Pre-ack async tx descriptor
dmaengine: bcm-sba-raid: Peek mbox when we have no free requests
dmaengine: bcm-sba-raid: Alloc resources before registering DMA device
dmaengine: bcm-sba-raid: Improve sba_issue_pending() run duration
dmaengine: bcm-sba-raid: Increase number of free sba_request
dmaengine: bcm-sba-raid: Allow arbitrary number free sba_request
dmaengine: bcm-sba-raid: Remove reqs_free_count from sba_device
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
"Nothing really major this release, despite quite a lot of activity.
Just lots of things all over the place.
Some things of note include:
- Access via perf to a new type of PMU (IMC) on Power9, which can
count both core events as well as nest unit events (Memory
controller etc).
- Optimisations to the radix MMU TLB flushing, mostly to avoid
unnecessary Page Walk Cache (PWC) flushes when the structure of the
tree is not changing.
- Reworks/cleanups of do_page_fault() to modernise it and bring it
closer to other architectures where possible.
- Rework of our page table walking so that THP updates only need to
send IPIs to CPUs where the affected mm has run, rather than all
CPUs.
- The size of our vmalloc area is increased to 56T on 64-bit hash MMU
systems. This avoids problems with the percpu allocator on systems
with very sparse NUMA layouts.
- STRICT_KERNEL_RWX support on PPC32.
- A new sched domain topology for Power9, to capture the fact that
pairs of cores may share an L2 cache.
- Power9 support for VAS, which is a new mechanism for accessing
coprocessors, and initial support for using it with the NX
compression accelerator.
- Major work on the instruction emulation support, adding support for
many new instructions, and reworking it so it can be used to
implement the emulation needed to fixup alignment faults.
- Support for guests under PowerVM to use the Power9 XIVE interrupt
controller.
And probably that many things again that are almost as interesting,
but I had to keep the list short. Plus the usual fixes and cleanups as
always.
Thanks to: Alexey Kardashevskiy, Alistair Popple, Andreas Schwab,
Aneesh Kumar K.V, Anju T Sudhakar, Arvind Yadav, Balbir Singh,
Benjamin Herrenschmidt, Bhumika Goyal, Breno Leitao, Bryant G. Ly,
Christophe Leroy, Cédric Le Goater, Dan Carpenter, Dou Liyang,
Frederic Barrat, Gautham R. Shenoy, Geliang Tang, Geoff Levand, Hannes
Reinecke, Haren Myneni, Ivan Mikhaylov, John Allen, Julia Lawall,
LABBE Corentin, Laurentiu Tudor, Madhavan Srinivasan, Markus Elfring,
Masahiro Yamada, Matt Brown, Michael Neuling, Murilo Opsfelder Araujo,
Nathan Fontenot, Naveen N. Rao, Nicholas Piggin, Oliver O'Halloran,
Paul Mackerras, Rashmica Gupta, Rob Herring, Rui Teng, Sam Bobroff,
Santosh Sivaraj, Scott Wood, Shilpasri G Bhat, Sukadev Bhattiprolu,
Suraj Jitindar Singh, Tobin C. Harding, Victor Aoqui"
* tag 'powerpc-4.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (321 commits)
powerpc/xive: Fix section __init warning
powerpc: Fix kernel crash in emulation of vector loads and stores
powerpc/xive: improve debugging macros
powerpc/xive: add XIVE Exploitation Mode to CAS
powerpc/xive: introduce H_INT_ESB hcall
powerpc/xive: add the HW IRQ number under xive_irq_data
powerpc/xive: introduce xive_esb_write()
powerpc/xive: rename xive_poke_esb() in xive_esb_read()
powerpc/xive: guest exploitation of the XIVE interrupt controller
powerpc/xive: introduce a common routine xive_queue_page_alloc()
powerpc/sstep: Avoid used uninitialized error
axonram: Return directly after a failed kzalloc() in axon_ram_probe()
axonram: Improve a size determination in axon_ram_probe()
axonram: Delete an error message for a failed memory allocation in axon_ram_probe()
powerpc/powernv/npu: Move tlb flush before launching ATSD
powerpc/macintosh: constify wf_sensor_ops structures
powerpc/iommu: Use permission-specific DEVICE_ATTR variants
powerpc/eeh: Delete an error out of memory message at init time
powerpc/mm: Use seq_putc() in two functions
macintosh: Convert to using %pOF instead of full_name
...
|
|
This patch adds P9 NX support for 842 compression engine. Virtual
Accelerator Switchboard (VAS) is used to access 842 engine on P9.
For each NX engine per chip, setup receive window using
vas_rx_win_open() which configures RxFIFo with FIFO address, lpid,
pid and tid values. This unique (lpid, pid, tid) combination will
be used to identify the target engine.
For crypto open request, open send window on the NX engine for
the corresponding chip / cpu where the open request is executed.
This send window will be closed upon crypto close request.
NX provides high and normal priority FIFOs. For compression /
decompression requests, we use only hight priority FIFOs in kernel.
Each NX request will be communicated to VAS using copy/paste
instructions with vas_copy_crb() / vas_paste_crb() functions.
Signed-off-by: Haren Myneni <haren@us.ibm.com>
Reviewed-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
This patch adds changes for checking P9 specific 842 engine
error codes. These errros are reported in coprocessor status
block (CSB) for failures.
Signed-off-by: Haren Myneni <haren@us.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Send window is opened / closed for each crypto session.
So initializes txwin in workmem.
Signed-off-by: Haren Myneni <haren@us.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Updating coprocessor list is moved to nx842_add_coprocs_list().
This function will be used for both icswx and VAS functions.
Signed-off-by: Haren Myneni <haren@us.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Move deleting coprocessors info upon exit or failure to
nx842_delete_coprocs().
Signed-off-by: Haren Myneni <haren@us.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Configure CRB is moved to nx842_configure_crb() so that it can
be used for icswx and VAS exec functions. VAS function will be
added later with P9 support.
Signed-off-by: Haren Myneni <haren@us.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Rename nx842_powernv_function to nx842_powernv_exec.
nx842_powernv_exec points to nx842_exec_icswx and
will be point to VAS exec function which will be added later
for P9 NX support.
Signed-off-by: Haren Myneni <haren@us.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Move the GET_FIELD and SET_FIELD macros to vas.h as VAS and other
users of VAS, including NX-842 can use those macros.
There is a lot of related code between the VAS/NX kernel drivers
and skiboot. For consistency, switch the order of parameters in
SET_FIELD to match the order in skiboot.
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Reviewed-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
'err' is known to be 0 at this point.
If 'kzalloc()' fails, returns -ENOMEM instead of 0 which means success.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
'ret' is known to be 0 at this point.
If 'safexcel_request_ring_irq()' fails, it returns an error code.
Return this value instead of 0 which means success.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The device can only process one request at a time. So if multiple
requests came at the same time, we can enqueue them first, and
dequeue them one by one when the device is idle.
Signed-off-by: zain wang <wzz@rock-chips.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Two return case misses to call release_firmware() and so leak some
memory.
This patch create a fw_release label (and so a common error path)
and use it on all return case.
Detected by CoverityScan, CID#1416422 ("Resource Leak")
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
platform_device_id are not supposed to change at runtime. All functions
working with platform_device_id provided by <linux/platform_device.h>
work with const platform_device_id. So mark the non-const structs as
const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This is an asynchronous crypto API driver for the accelerator present
in the ARTPEC-6 and -7 SoCs from Axis Communications AB.
The driver supports AES in ECB/CTR/CBC/XTS/GCM modes and SHA1/2 hash
standards.
Signed-off-by: Lars Persson <larper@axis.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Merge the crypto tree to resolve the conflict between the temporary
and long-term fixes in algif_skcipher.
|
|
There are no in kernel consumers for DMA_SG op. Removing operation,
dead code, and test code in dmatest.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Gary Hook <gary.hook@amd.com>
Cc: Ludovic Desroches <ludovic.desroches@microchip.com>
Cc: Kedareswara rao Appana <appana.durga.rao@xilinx.com>
Cc: Li Yang <leoyang.li@nxp.com>
Cc: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
|
|
The return value of dma_map_single() should be checked by
dma_mapping_error(). However, in function ccp_init_dm_workarea(), its
return value is checked against NULL, which could result in failures.
Signed-off-by: Pan Bian <bianpan2016@163.com>
Acked-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This driver previously used a spinlock. The spinlock is not
used any more, but the spinlock variable was still there
and also being initialized.
Signed-off-by: Mogens Lauridsen <mlauridsen171@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The direction used in dma_unmap_sg in aes calc is wrong.
This result in the cache not being invalidated correct when aes
calculation is done and result has been dma'ed to memory.
This is seen as sporadic wrong result from aes calc.
Signed-off-by: Mogens Lauridsen <mlauridsen171@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Most of the dentry members from structure caam_drv_private
are never used at all, so it is safe to remove them.
Since debugfs_remove_recursive() is called, we don't need the
file entries.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Without the base RSA code, we run into a link error:
ERROR: "rsa_parse_pub_key" [drivers/crypto/ccp/ccp-crypto.ko] undefined!
ERROR: "rsa_parse_priv_key" [drivers/crypto/ccp/ccp-crypto.ko] undefined!
Like the other drivers implementing RSA in hardware, this
can be avoided by always enabling the base support when we build
CCP.
Fixes: ceeec0afd684 ("crypto: ccp - Add support for RSA on the CCP")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The added support for version 5 CCPs introduced a false-positive
warning in the RSA implementation:
drivers/crypto/ccp/ccp-ops.c: In function 'ccp_run_rsa_cmd':
drivers/crypto/ccp/ccp-ops.c:1856:3: error: 'sb_count' may be used uninitialized in this function [-Werror=maybe-uninitialized]
This changes the code in a way that should make it easier for
the compiler to track the state of the sb_count variable, and
avoid the warning.
Fixes: 6ba46c7d4d7e ("crypto: ccp - Fix base RSA function for version 5 CCPs")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
In commit 0f987e25cb8a, the source processing has been moved in front of
the destination processing, but the error handling path has not been
modified accordingly.
Free resources in the correct order to avoid some leaks.
Cc: <stable@vger.kernel.org>
Fixes: 0f987e25cb8a ("crypto: ixp4xx - Fix false lastlen uninitialised warning")
Reported-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
|
|
Signed-off-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The CCP supports a limited set of unit-size values. Change the check
for this parameter such that acceptable values match the enumeration.
Then clarify the conditions under which we must use the fallback
implementation.
Signed-off-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Vet the key using the available standard function
Signed-off-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Version 5 CCPs have some new requirements for XTS-AES: the type field
must be specified, and the key requires 512 bits, with each part
occupying 256 bits and padded with zeroes.
cc: <stable@vger.kernel.org> # 4.9.x+
Signed-off-by: Gary R Hook <ghook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
There are quite a number of occurrences in the kernel of the pattern
if (dst != src)
memcpy(dst, src, walk.total % AES_BLOCK_SIZE);
crypto_xor(dst, final, walk.total % AES_BLOCK_SIZE);
or
crypto_xor(keystream, src, nbytes);
memcpy(dst, keystream, nbytes);
where crypto_xor() is preceded or followed by a memcpy() invocation
that is only there because crypto_xor() uses its output parameter as
one of the inputs. To avoid having to add new instances of this pattern
in the arm64 code, which will be refactored to implement non-SIMD
fallbacks, add an alternative implementation called crypto_xor_cpy(),
taking separate input and output arguments. This removes the need for
the separate memcpy().
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Sometime we would unable to dequeue the crypto request, in this case,
we should finish crypto and return the err code.
Signed-off-by: zain wang <wzz@rock-chips.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
It's illegal to call the completion function from hardirq context,
it will cause runtime tests to fail. Let's build a new task (done_task)
for moving update operation from hardirq context.
Signed-off-by: zain wang <wzz@rock-chips.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Enhance code to generically support cases where DMA rings
are greater than or equal to number of SPU engines.
New hardware has underlying DMA engine-FlexRM with 32 rings
which can be used to communicate to any of the available
10 SPU engines.
Signed-off-by: Raveendra Padasalagi <raveendra.padasalagi@broadcom.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
static checker warning:
drivers/crypto/atmel-ecc.c:281 atmel_ecdh_done()
warn: assigning (-22) to unsigned variable 'status'
Similar warning can be raised in atmel_ecc_work_handler()
when atmel_ecc_send_receive() returns an error. Fix this too.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
commit 720419f01832 ("crypto: ccp - Introduce the AMD Secure Processor device")
moved the module registeration from ccp-dev.c to sp-dev.c but patch missed
removing the module version and author entry from ccp-dev.c.
It causes the below warning during boot when CONFIG_CRYPTO_DEV_SP_CCP=y
and CONFIG_CRYPTO_DEV_CCP_CRYPTO=y is set.
[ 0.187825] sysfs: cannot create duplicate filename '/module/ccp/version'
[ 0.187825] sysfs: cannot create duplicate filename '/module/ccp/version'
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Gary R Hook <gary.hook@amd.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Functions atmel_ecc_i2c_client_alloc and atmel_ecc_i2c_client_free are
local to the source and no not need to be in the global scope. Make
them static.
Cleans up sparse warnings:
symbol 'atmel_ecc_i2c_client_alloc' was not declared. Should it be static?
symbol 'atmel_ecc_i2c_client_free' was not declared. Should it be static?
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Remove unnecessary static on local variable hdev. Such variable
is initialized before being used, on every execution path throughout
the function. The static has no benefit and, removing it reduces the
object file size.
This issue was detected using Coccinelle and the following semantic patch:
https://github.com/GustavoARSilva/coccinelle/blob/master/static/static_unused.cocci
In the following log you can see a significant difference in the object
file size. This log is the output of the size command, before and after
the code change:
before:
text data bss dec hex filename
14842 6464 128 21434 53ba drivers/crypto/img-hash.o
after:
text data bss dec hex filename
14789 6376 64 21229 52ed drivers/crypto/img-hash.o
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Remove unnecessary static on local variable tdes_dd. Such variable
is initialized before being used, on every execution path throughout
the function. The static has no benefit and, removing it reduces the
object file size.
This issue was detected using Coccinelle and the following semantic patch:
https://github.com/GustavoARSilva/coccinelle/blob/master/static/static_unused.cocci
In the following log you can see a significant difference in the object
file size. This log is the output of the size command, before and after
the code change:
before:
text data bss dec hex filename
17079 8704 128 25911 6537 drivers/crypto/atmel-tdes.o
after:
text data bss dec hex filename
17039 8616 64 25719 6477 drivers/crypto/atmel-tdes.o
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Remove unnecessary static on local variable sha_dd. Such variable
is initialized before being used, on every execution path throughout
the function. The static has no benefit and, removing it reduces the
object file size.
This issue was detected using Coccinelle and the following semantic patch:
https://github.com/GustavoARSilva/coccinelle/blob/master/static/static_unused.cocci
In the following log you can see a significant difference in the object
file size. This log is the output of the size command, before and after
the code change:
before:
text data bss dec hex filename
30005 10264 128 40397 9dcd drivers/crypto/atmel-sha.o
after:
text data bss dec hex filename
29934 10208 64 40206 9d0e drivers/crypto/atmel-sha.o
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Remove unnecessary static on local variable dd. Such variable
is initialized before being used, on every execution path throughout
the function. The static has no benefit and, removing it reduces the
object file size.
This issue was detected using Coccinelle and the following semantic patch:
https://github.com/GustavoARSilva/coccinelle/blob/master/static/static_unused.cocci
In the following log you can see a difference in the object file size.
This log is the output of the size command, before and after the code
change:
before:
text data bss dec hex filename
26135 11944 128 38207 953f drivers/crypto/omap-sham.o
after:
text data bss dec hex filename
26084 11856 64 38004 9474 drivers/crypto/omap-sham.o
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Now that we have a custom printf format specifier, convert users of
full_name to use %pOF instead. This is preparation to remove storing
of the full path string for each node.
Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-crypto@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add support for using the caam/jr backend on DPAA2-based SoCs.
These have some particularities we have to account for:
-HW S/G format is different
-Management Complex (MC) firmware initializes / manages (partially)
the CAAM block: MCFGR, QI enablement in QICTL, RNG
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
