summaryrefslogtreecommitdiff
path: root/drivers/crypto/talitos.c
AgeCommit message (Collapse)AuthorFilesLines
2012-08-28crypto: talitos - add IPsec ESN supportHoria Geanta1-2/+28
Support for ESNs (extended sequence numbers). Tested with strongswan on a P2020RDB back-to-back setup. Extracted from /etc/ipsec.conf: esp=aes-sha1-esn-modp4096! Signed-off-by: Horia Geanta <horia.geanta@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-08-28crypto: talitos - support for assoc data provided as scatterlistHoria Geanta1-51/+125
Generate a link table in case assoc data is a scatterlist. While at it, add support for handling non-contiguous assoc data and iv. Signed-off-by: Horia Geanta <horia.geanta@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-08-28crypto: talitos - change type and name for [src|dst]_is_chainedHoria Geanta1-21/+20
It's more natural to think of these vars as bool rather than int. Signed-off-by: Horia Geanta <horia.geanta@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-08-28crypto: talitos - prune unneeded descriptor allocation paramHoria Geanta1-7/+6
talitos_edesc_alloc does not need hash_result param. Checking whether dst scatterlist is NULL or not is all that is required. Signed-off-by: Horia Geanta <horia.geanta@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-08-28crypto: talitos - fix icv management on outbound directionHoria Geanta1-1/+1
For IPsec encryption, in the case when: -the input buffer is fragmented (edesc->src_nents > 0) -the output buffer is not fragmented (edesc->dst_nents = 0) the ICV is not output in the link table, but after the encrypted payload. Copying the ICV must be avoided in this case; consequently the condition edesc->dma_len > 0 must be more specific, i.e. must depend on the type of the output buffer - fragmented or not. Testing was performed by modifying testmgr to support src != dst, since currently native kernel IPsec does in-place encryption (src == dst). Signed-off-by: Horia Geanta <horia.geanta@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-08-28crypto: talitos - consolidate common cra_* assignmentsKim Phillips1-146/+17
the entry points and geniv definitions for all aead, ablkcipher, and hash algorithms are all common; move them to a single assignment in talitos_alg_alloc(). This assumes it's ok to assign a setkey() on non-hmac algs. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-08-28crypto: talitos - consolidate cra_type assignmentsKim Phillips1-26/+3
lighten driver_algs[] by moving them to talitos_alg_alloc(). Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-07-11crypto: talitos - add sha224, sha384 and sha512 to existing AEAD algorithmsHoria Geanta1-1/+160
With this, now all combinations of CBC: AES, 3DES-EDE with HMAC: SHA-1, SHA-224, SHA-256, SHA-384, SHA-512 are supported. Signed-off-by: Horia Geanta <horia.geanta@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-07-11crypto: talitos - export the talitos_submit functionHoria Geanta1-5/+6
This patch exports the talitos_submit function so that on need basis same can be used by other entities. Signed-off-by: Sandeep Malik <Sandeep.Malik@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Horia Geanta <horia.geanta@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-07-11crypto: talitos - move talitos structures to header fileHoria Geanta1-111/+0
This patch moves the talitos structure definitions from c file to its header file so that the same can be shared on need basis. Signed-off-by: Sandeep Malik <Sandeep.Malik@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Horia Geanta <horia.geanta@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-04-09crypto: talitos - properly lock access to global talitos registersHoria Geanta1-3/+17
Access to global talitos registers must be protected for the case when affinities are configured such that primary and secondary talitos irqs run on different cpus. Signed-off-by: Horia Geanta <horia.geanta@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-01-13crypto: Add CRYPTO_ALG_KERN_DRIVER_ONLY flagNikos Mavrogiannopoulos1-0/+1
The added CRYPTO_ALG_KERN_DRIVER_ONLY indicates whether a cipher is only available via a kernel driver. If the cipher implementation might be available by using an instruction set or by porting the kernel code, then it must not be set. Signed-off-by: Nikos Mavrogiannopoulos <nmav@gnutls.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-12-20crypto: talitos - convert talitos_error to struct deviceKim Phillips1-3/+2
SEC2/3 h/w doesn't have a dedicated interrupt for errors, and the only callsite for talitos_error has already done the type conversion, so simplify talitos_error to take a pointer to a struct device. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-12-20crypto: talitos - remove NO_IRQ referencesKim Phillips1-9/+9
As prescribed by Linus: https://lkml.org/lkml/2011/12/2/290 Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-12-20crypto: talitos - fix bad kfreeKim Phillips1-4/+4
Fix a kfree to an invalid address which causes an oops when running on SEC v2.0 h/w (introduced in commit 702331b "crypto: talitos - add hmac algorithms"). Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-11-30crypto: convert drivers/crypto/* to use module_platform_driver()Axel Lin1-11/+1
This patch converts the drivers in drivers/crypto/* to use the module_platform_driver() macro which makes the code smaller and a bit simpler. Cc: James Hsiao <jhsiao@amcc.com> Cc: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Cc: Kim Phillips <kim.phillips@freescale.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Vladimir Zapolskiy <vzapolskiy@gmail.com> Acked-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-11-21crypto: talitos - support for channel remap and 2nd IRQKim Phillips1-69/+138
Some later SEC v3.x are equipped with a second IRQ line. By correctly assigning IRQ affinity, this feature can be used to increase performance on dual core parts, like the MPC8572E and P2020E. The existence of the 2nd IRQ is determined from the device node's interrupt property. If present, the driver remaps two of four channels, which in turn makes those channels trigger their interrupts on the 2nd line instead of the first. To handle single- and dual-IRQ combinations efficiently, talitos gets two new interrupt handlers and back-half workers. [includes a fix to MCR_LO's address.] Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-11-21crypto: talitos - prepare driver for channel remap supportKim Phillips1-15/+22
Add a reg member to the channel struct and use it to access channels. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-11-21crypto: talitos - be less noisy on startupKim Phillips1-3/+4
talitos prints every algorithm it registers at module load time. Algorithms are being added that make for an excessively noisy console (latest HMACs patch makes an SEC 3.1 print 20 lines). Instead, display the SEC h/w version number, and inform the user of algorithm registration status in /proc/crypto, like so: talitos ffe30000.crypto: fsl,sec3.1 algorithms registered in /proc/crypto Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-11-21crypto: talitos - add hmac algorithmsLee Nipper1-2/+235
Add these hmac algorithms to talitos: hmac(md5), hmac(sha1), hmac(sha224), hmac(sha256), hmac(sha384), hmac(sha512). These are all type ahash. Signed-off-by: Lee Nipper <lee.nipper@gmail.com> Fixed up to not register HMAC algorithms on sec2.0 devices. Rationale (from Lee): on an 8349E Rev1.1, there's a problem with hmac for any talitos hmac sequence requiring an intermediate hash context (Pointer DWORD 1); the result is an incorrect hmac. An intermediate hash context is required for something longer than (65536-blocksize), and for other cases when update/finup/final are used inefficiently. Interestingly, a normal hash (without hmac) works perfectly when using an intermediate context. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-10-21crypto: talitos - handle descriptor not found in error pathKim Phillips1-8/+10
The CDPR (Current Descriptor Pointer Register) can be unreliable when trying to locate an offending descriptor. Handle that case by (a) not OOPSing, and (b) reverting to the machine internal copy of the descriptor header in order to report the correct execution unit error. Note: printing all execution units' ISRs is not effective because it results in an internal time out (ITO) error and the EU resetting its ISR value (at least when specifying an invalid key length on an SEC 2.2/MPC8313E). Reported-by: Sven Schnelle <svens@stackframe.org> Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-07-15crypto: talitos - don't bad_key in ablkcipher setkeyKim Phillips1-11/+0
crypto/ablkcipher.c's setkey() has already checked against the min, max key sizes before it calls here, and all max_keysize assignments in the algorithm template array do not exceed TALITOS_MAX_KEY_SIZE. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-07-15crypto: talitos - remove unused giv from ablkcipher methodsKim Phillips1-4/+3
Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-07-15crypto: talitos - don't set done notification in hot pathKim Phillips1-3/+3
IRQ done notification is always set. Remove its explicit assignment from the hot path by including it in the descriptor header template assignment in talitos_cra_init. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-07-15crypto: talitos - ensure request ordering within a single tfmKim Phillips1-9/+14
Assign single target channel per tfm in talitos_cra_init instead of performing channel scheduling dynamically during the encryption request. This changes the talitos_submit interface to accept a new channel number argument. Without this, rapid bursts of misc. sized requests could make it possible for IPsec packets to be encrypted out-of-order, which would result in packet drops due to sequence numbers falling outside the anti-reply window on a peer gateway. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-02-28dt: Eliminate of_platform_{,un}register_driverGrant Likely1-5/+4
Final step to eliminate of_platform_bus_type. They're all just platform drivers now. v2: fix type in pasemi_nand.c (thanks to Stephen Rothwell) Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds1-14/+15
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: Makefile - replace the use of <module>-objs with <module>-y crypto: hifn_795x - use cancel_delayed_work_sync() crypto: talitos - sparse check endian fixes crypto: talitos - fix checkpatch warning crypto: talitos - fix warning: 'alg' may be used uninitialized in this function crypto: cryptd - Adding the AEAD interface type support to cryptd crypto: n2_crypto - Niagara2 driver needs to depend upon CRYPTO_DES crypto: Kconfig - update broken web addresses crypto: omap-sham - Adjust DMA parameters crypto: fips - FIPS requires algorithm self-tests crypto: omap-aes - OMAP2/3 AES hw accelerator driver crypto: updates to enable omap aes padata: add missing __percpu markup in include/linux/padata.h MAINTAINERS: Add maintainer entries for padata/pcrypt
2010-09-23crypto: talitos - sparse check endian fixesKim Phillips1-12/+11
Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2010-09-23crypto: talitos - fix checkpatch warningKim Phillips1-2/+1
WARNING: kfree(NULL) is safe this check is probably not required + if (priv->chan[i].fifo) + kfree(priv->chan[i].fifo); Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2010-09-23crypto: talitos - fix warning: 'alg' may be used uninitialized in this functionKim Phillips1-0/+3
drivers/crypto/talitos.c: In function 'talitos_probe': drivers/crypto/talitos.c:2363: warning: 'alg' may be used uninitialized in this function drivers/crypto/talitos.c:2363: note: 'alg' was declared here Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2010-08-06of/device: Replace struct of_device with struct platform_deviceGrant Likely1-3/+3
of_device is just an alias for platform_device, so remove it entirely. Also replace to_of_device() with to_platform_device() and update comment blocks. This patch was initially generated from the following semantic patch, and then edited by hand to pick up the bits that coccinelle didn't catch. @@ @@ -struct of_device +struct platform_device Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Reviewed-by: David S. Miller <davem@davemloft.net>
2010-08-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds1-37/+40
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (39 commits) random: Reorder struct entropy_store to remove padding on 64bits padata: update API documentation padata: Remove padata_get_cpumask crypto: pcrypt - Update pcrypt cpumask according to the padata cpumask notifier crypto: pcrypt - Rename pcrypt_instance padata: Pass the padata cpumasks to the cpumask_change_notifier chain padata: Rearrange set_cpumask functions padata: Rename padata_alloc functions crypto: pcrypt - Dont calulate a callback cpu on empty callback cpumask padata: Check for valid cpumasks padata: Allocate cpumask dependend recources in any case padata: Fix cpu index counting crypto: geode_aes - Convert pci_table entries to PCI_VDEVICE (if PCI_ANY_ID is used) pcrypt: Added sysfs interface to pcrypt padata: Added sysfs primitives to padata subsystem padata: Make two separate cpumasks padata: update documentation padata: simplify serialization mechanism padata: make padata_do_parallel to return zero on success padata: Handle empty padata cpumasks ...
2010-07-19crypto: talitos - fix bug in sg_copy_end_to_bufferLee Nipper1-1/+5
In function sg_copy_end_to_buffer, too much data is copied when a segment in the scatterlist has .length greater than the requested copy length. This patch adds the limit checks to fix this bug of over copying, which affected only the ahash algorithms. Signed-off-by: Lee Nipper <lee.nipper@gmail.com> Acked-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2010-06-16crypto: talitos - fix ahash for multiple of blocksizeLee Nipper1-37/+40
Correct ahash_process_req() to properly handle cases where the total hash amount is a multiple of the blocksize. The SEC must have some data to hash during the very last descriptor operation; so up to one whole blocksize of data is buffered until the final hash. Signed-off-by: Lee Nipper <lee.nipper@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2010-05-22Merge remote branch 'origin' into secretlab/next-devicetreeGrant Likely1-47/+652
Merging in current state of Linus' tree to deal with merge conflicts and build failures in vio.c after merge. Conflicts: drivers/i2c/busses/i2c-cpm.c drivers/i2c/busses/i2c-mpc.c drivers/net/gianfar.c Also fixed up one line in arch/powerpc/kernel/vio.c to use the correct node pointer. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-05-22of: Remove duplicate fields from of_platform_driverGrant Likely1-2/+5
.name, .match_table and .owner are duplicated in both of_platform_driver and device_driver. This patch is a removes the extra copies from struct of_platform_driver and converts all users to the device_driver members. This patch is a pretty mechanical change. The usage model doesn't change and if any drivers have been missed, or if anything has been fixed up incorrectly, then it will fail with a compile time error, and the fixup will be trivial. This patch looks big and scary because it touches so many files, but it should be pretty safe. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Sean MacLennan <smaclennan@pikatech.com>
2010-05-19crypto: talitos - add support for sha224Kim Phillips1-9/+72
SEC h/w versions 2.1 and above support sha224 via explicit instruction. Performing sha224 ahashes on earlier versions is still possible because they support sha256 (sha224 is sha256 with different initial constants and a different truncation length). We do this by overriding hardware context self-initialization, and perform it manually in s/w instead. Thanks to Lee for his fixes for correct execution on actual sec2.0 h/w. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off by: Lee Nipper <lee.nipper@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2010-05-19crypto: talitos - add hash algorithmsLee Nipper1-18/+526
Add the following alorithms to talitos: md5, sha1, sha256, sha384, sha512. These are all type ahash. Signed-off-by: Lee Nipper <lee.nipper@gmail.com> Acked-By: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2010-05-19crypto: talitos - second prepare step for adding ahash algorithmsLee Nipper1-12/+43
Used talitos_alg_template in talitos_crypto_alg so that it will accommodate ahash algorithms. Added some preparation code for ahash allocation and removal. No actual algorithms yet. Signed-off-by: Lee Nipper <lee.nipper@gmail.com> Acked-By: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2010-05-19crypto: talitos - prepare for adding ahash algorithms Lee Nipper1-18/+21
No functional changes. Use a union in talitos_alg_template for the crypto_alg so that we can add a member later for ahash_alg. Signed-off-by: Lee Nipper <lee.nipper@gmail.com> Acked-By: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2010-05-19of: Always use 'struct device.of_node' to get device node pointer.Grant Likely1-1/+1
The following structure elements duplicate the information in 'struct device.of_node' and so are being eliminated. This patch makes all readers of these elements use device.of_node instead. (struct of_device *)->node (struct dev_archdata *)->prom_node (sparc) (struct dev_archdata *)->of_node (powerpc & microblaze) Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo1-0/+1
implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-01-17crypto: Make Open Firmware device id constantMárton Németh1-1/+1
From: Márton Németh <nm127@freemail.hu> The match_table field of the struct of_device_id is constant in <linux/of_platform.h> so it is worth to make the initialization data also constant. The semantic match that finds this kind of pattern is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r@ disable decl_init,const_decl_init; identifier I1, I2, x; @@ struct I1 { ... const struct I2 *x; ... }; @s@ identifier r.I1, y; identifier r.x, E; @@ struct I1 y = { .x = E, }; @c@ identifier r.I2; identifier s.E; @@ const struct I2 E[] = ... ; @depends on !c@ identifier r.I2; identifier s.E; @@ + const struct I2 E[] = ...; // </smpl> Signed-off-by: Márton Németh <nm127@freemail.hu> Cc: Julia Lawall <julia@diku.dk> Cc: cocci@diku.dk Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2009-08-13crypto: talitos - add support for 36 bit addressingKim Phillips1-29/+40
Enabling extended addressing in the h/w requires we always assign the extended address component (eptr) of the talitos h/w pointer. This is for e500 based platforms with large memories. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2009-08-13crypto: talitos - align locks on cache linesKim Phillips1-83/+58
align channel access locks onto separate cache lines (for performance reasons). This is done by placing per-channel variables into their own private struct, and using the cacheline_aligned attribute within that struct. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2009-08-13crypto: talitos - simplify hmac data size calculationKim Phillips1-5/+3
don't do request->src vs. assoc pointer math - it's the same as adding assoclen and ivsize (just with more effort). Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2009-06-02crypto: talitos - Avoid unnecessary decrypt checkKim Phillips1-2/+1
the ICV check bit only gets set in decrypt entry points Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2009-06-02crypto: talitos - containerof related codingstyleKim Phillips1-10/+16
no functional changes. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2009-06-02crypto: talitos - Whitespace/codingstyle/overrun lines cleanupKim Phillips1-47/+48
no functional changes. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2009-06-02crypto: talitos - Add ablkcipher algorithmsLee Nipper1-38/+342
Add these ablkcipher algorithms: cbc(aes), cbc(des3_ede). Added handling of chained scatterlists with zero length entry because eseqiv uses it. Added new map and unmap routines. Signed-off-by: Lee Nipper <lee.nipper@gmail.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-27 08:14:09 +0300