summaryrefslogtreecommitdiff
path: root/drivers/crypto/Kconfig
AgeCommit message (Collapse)AuthorFilesLines
2021-01-08crypto: omap-sham - Fix link error without crypto-engineArnd Bergmann1-0/+1
The driver was converted to use the crypto engine helper but is missing the corresponding Kconfig statement to ensure it is available: arm-linux-gnueabi-ld: drivers/crypto/omap-sham.o: in function `omap_sham_probe': omap-sham.c:(.text+0x374): undefined reference to `crypto_engine_alloc_init' arm-linux-gnueabi-ld: omap-sham.c:(.text+0x384): undefined reference to `crypto_engine_start' arm-linux-gnueabi-ld: omap-sham.c:(.text+0x510): undefined reference to `crypto_engine_exit' arm-linux-gnueabi-ld: drivers/crypto/omap-sham.o: in function `omap_sham_finish_req': omap-sham.c:(.text+0x98c): undefined reference to `crypto_finalize_hash_request' arm-linux-gnueabi-ld: omap-sham.c:(.text+0x9a0): undefined reference to `crypto_transfer_hash_request_to_engine' arm-linux-gnueabi-ld: drivers/crypto/omap-sham.o: in function `omap_sham_update': omap-sham.c:(.text+0xf24): undefined reference to `crypto_transfer_hash_request_to_engine' arm-linux-gnueabi-ld: drivers/crypto/omap-sham.o: in function `omap_sham_final': omap-sham.c:(.text+0x1020): undefined reference to `crypto_transfer_hash_request_to_engine' Fixes: 133c3d434d91 ("crypto: omap-sham - convert to use crypto engine") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-12-11crypto: atmel-i2c - select CONFIG_BITREVERSEArnd Bergmann1-0/+1
The bitreverse helper is almost always built into the kernel, but in a rare randconfig build it is possible to hit a case in which it is a loadable module while the atmel-i2c driver is built-in: arm-linux-gnueabi-ld: drivers/crypto/atmel-i2c.o: in function `atmel_i2c_checksum': atmel-i2c.c:(.text+0xa0): undefined reference to `byte_rev_table' Add one more 'select' statement to prevent this. Fixes: 11105693fa05 ("crypto: atmel-ecc - introduce Microchip / Atmel ECC driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-12-11crypto: keembay - Add support for Keem Bay OCS AES/SM4Mike Healy1-0/+2
Add support for the AES/SM4 crypto engine included in the Offload and Crypto Subsystem (OCS) of the Intel Keem Bay SoC, thus enabling hardware-acceleration for the following transformations: - ecb(aes), cbc(aes), ctr(aes), cts(cbc(aes)), gcm(aes) and cbc(aes); supported for 128-bit and 256-bit keys. - ecb(sm4), cbc(sm4), ctr(sm4), cts(cbc(sm4)), gcm(sm4) and cbc(sm4); supported for 128-bit keys. The driver passes crypto manager self-tests, including the extra tests (CRYPTO_MANAGER_EXTRA_TESTS=y). Signed-off-by: Mike Healy <mikex.healy@intel.com> Co-developed-by: Daniele Alessandrelli <daniele.alessandrelli@intel.com> Signed-off-by: Daniele Alessandrelli <daniele.alessandrelli@intel.com> Acked-by: Mark Gross <mgross@linux.intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-11-20crypto: kconfig - fix a couple of spelling mistakesColin Ian King1-1/+1
There are a couple of spelling mistakes in two crypto Kconfig files. Fix these. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-10-16Merge tag 's390-5.10-1' of ↵Linus Torvalds1-4/+20
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Vasily Gorbik: - Remove address space overrides using set_fs() - Convert to generic vDSO - Convert to generic page table dumper - Add ARCH_HAS_DEBUG_WX support - Add leap seconds handling support - Add NVMe firmware-assisted kernel dump support - Extend NVMe boot support with memory clearing control and addition of kernel parameters - AP bus and zcrypt api code rework. Add adapter configure/deconfigure interface. Extend debug features. Add failure injection support - Add ECC secure private keys support - Add KASan support for running protected virtualization host with 4-level paging - Utilize destroy page ultravisor call to speed up secure guests shutdown - Implement ioremap_wc() and ioremap_prot() with MIO in PCI code - Various checksum improvements - Other small various fixes and improvements all over the code * tag 's390-5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (85 commits) s390/uaccess: fix indentation s390/uaccess: add default cases for __put_user_fn()/__get_user_fn() s390/zcrypt: fix wrong format specifications s390/kprobes: move insn_page to text segment s390/sie: fix typo in SIGP code description s390/lib: fix kernel doc for memcmp() s390/zcrypt: Introduce Failure Injection feature s390/zcrypt: move ap_msg param one level up the call chain s390/ap/zcrypt: revisit ap and zcrypt error handling s390/ap: Support AP card SCLP config and deconfig operations s390/sclp: Add support for SCLP AP adapter config/deconfig s390/ap: add card/queue deconfig state s390/ap: add error response code field for ap queue devices s390/ap: split ap queue state machine state from device state s390/zcrypt: New config switch CONFIG_ZCRYPT_DEBUG s390/zcrypt: introduce msg tracking in zcrypt functions s390/startup: correct early pgm check info formatting s390: remove orphaned extern variables declarations s390/kasan: make sure int handler always run with DAT on s390/ipl: add support to control memory clearing for nvme re-IPL ...
2020-10-13Merge branch 'linus' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "API: - Allow DRBG testing through user-space af_alg - Add tcrypt speed testing support for keyed hashes - Add type-safe init/exit hooks for ahash Algorithms: - Mark arc4 as obsolete and pending for future removal - Mark anubis, khazad, sead and tea as obsolete - Improve boot-time xor benchmark - Add OSCCA SM2 asymmetric cipher algorithm and use it for integrity Drivers: - Fixes and enhancement for XTS in caam - Add support for XIP8001B hwrng in xiphera-trng - Add RNG and hash support in sun8i-ce/sun8i-ss - Allow imx-rngc to be used by kernel entropy pool - Use crypto engine in omap-sham - Add support for Ingenic X1830 with ingenic" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (205 commits) X.509: Fix modular build of public_key_sm2 crypto: xor - Remove unused variable count in do_xor_speed X.509: fix error return value on the failed path crypto: bcm - Verify GCM/CCM key length in setkey crypto: qat - drop input parameter from adf_enable_aer() crypto: qat - fix function parameters descriptions crypto: atmel-tdes - use semicolons rather than commas to separate statements crypto: drivers - use semicolons rather than commas to separate statements hwrng: mxc-rnga - use semicolons rather than commas to separate statements hwrng: iproc-rng200 - use semicolons rather than commas to separate statements hwrng: stm32 - use semicolons rather than commas to separate statements crypto: xor - use ktime for template benchmarking crypto: xor - defer load time benchmark to a later time crypto: hisilicon/zip - fix the uninitalized 'curr_qm_qp_num' crypto: hisilicon/zip - fix the return value when device is busy crypto: hisilicon/zip - fix zero length input in GZIP decompress crypto: hisilicon/zip - fix the uncleared debug registers lib/mpi: Fix unused variable warnings crypto: x86/poly1305 - Remove assignments with no effect hwrng: npcm - modify readl to readb ...
2020-10-07s390/zcrypt: New config switch CONFIG_ZCRYPT_DEBUGHarald Freudenberger1-4/+20
Introduce a new config switch CONFIG_ZCRYPT_DEBUG which will be used to enable some features for debugging the zcrypt device driver and ap bus system: Another patch will use this for displaying ap card and ap queue state information via sysfs attribute. A furher patch will use this to enable some special treatment for some fields of an crypto request to be able to inject failures and so help debugging with regards to handling of failures. Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-09-18crypto: sa2ul - Select CRYPTO_AUTHENCHerbert Xu1-0/+1
The sa2ul driver uses crypto_authenc_extractkeys and therefore must select CRYPTO_AUTHENC. Fixes: 7694b6ca649f ("crypto: sa2ul - Add crypto driver") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Reviewed-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-08-21crypto: sa2ul - add Kconfig selects to fix build errorRandy Dunlap1-0/+3
sa2ul.c uses sha{1,256,512}_zero_message_hash, so select the Kconfig symbols that provide those, like other crypto drivers do. Fixes this build error: ld: drivers/crypto/sa2ul.o: in function `sa_sha_digest': sa2ul.c:(.text+0x2b25): undefined reference to `sha512_zero_message_hash' Fixes: 7694b6ca649f ("crypto: sa2ul - Add crypto driver") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: Randy Dunlap <rdunlap@infradead.org> # 2020-07-29 Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: "David S. Miller" <davem@davemloft.net> Cc: linux-crypto@vger.kernel.org Cc: Tero Kristo <t-kristo@ti.com> Cc: Keerthy <j-keerthy@ti.com> Reviewed-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-07-23crypto: sa2ul - Add crypto driverKeerthy1-0/+14
Adds a basic crypto driver and currently supports AES/3DES in cbc mode for both encryption and decryption. Signed-off-by: Keerthy <j-keerthy@ti.com> [t-kristo@ti.com: major re-work to fix various bugs in the driver and to cleanup the code] Signed-off-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-07-16crypto: mediatek - use AES library for GCM key derivationArd Biesheuvel1-2/+1
The Mediatek accelerator driver calls into a dynamically allocated skcipher of the ctr(aes) variety to perform GCM key derivation, which involves AES encryption of a single block consisting of NUL bytes. There is no point in using the skcipher API for this, so use the AES library interface instead. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-07-03crypto: qce - support zero length test vectorsSivaprakash Murugesan1-0/+2
crypto test module passes zero length vectors as test input to sha-1 and sha-256. To provide correct output for these vectors, hash zero support has been added as in other crypto drivers. Signed-off-by: Sivaprakash Murugesan <sivaprak@codeaurora.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-06-13treewide: replace '---help---' in Kconfig files with 'help'Masahiro Yamada1-4/+4
Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over '---help---'"), the number of '---help---' has been gradually decreasing, but there are still more than 2400 instances. This commit finishes the conversion. While I touched the lines, I also fixed the indentation. There are a variety of indentation styles found. a) 4 spaces + '---help---' b) 7 spaces + '---help---' c) 8 spaces + '---help---' d) 1 space + 1 tab + '---help---' e) 1 tab + '---help---' (correct indentation) f) 1 tab + 1 space + '---help---' g) 1 tab + 2 spaces + '---help---' In order to convert all of them to 1 tab + 'help', I ran the following commend: $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/' Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-03-20crypto: marvell - create common Kconfig and Makefile for MarvellSrujanaChalla1-14/+1
Creats common Kconfig and Makefile for Marvell crypto drivers. Signed-off-by: SrujanaChalla <schalla@marvell.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-02-28crypto: xilinx - Add Xilinx AES driverKalyani Akula1-0/+12
This patch adds AES driver support for the Xilinx ZynqMP SoC. Signed-off-by: Mohan Marutirao Dhanawade <mohan.dhanawade@xilinx.com> Signed-off-by: Kalyani Akula <kalyani.akula@xilinx.com> Acked-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-02-13crypto: qce - use AES fallback for small requestsEneas U de Queiroz1-0/+23
Process small blocks using the fallback cipher, as a workaround for an observed failure (DMA-related, apparently) when computing the GCM ghash key. This brings a speed gain as well, since it avoids the latency of using the hardware engine to process small blocks. Using software for all 16-byte requests would be enough to make GCM work, but to increase performance, a larger threshold would be better. Measuring the performance of supported ciphers with openssl speed, software matches hardware at around 768-1024 bytes. Considering the 256-bit ciphers, software is 2-3 times faster than qce at 256-bytes, 30% faster at 512, and about even at 768-bytes. With 128-bit keys, the break-even point would be around 1024-bytes. This adds the 'aes_sw_max_len' parameter, to set the largest request length processed by the software fallback. Its default is being set to 512 bytes, a little lower than the break-even point, to balance the cost in CPU usage. Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-01-09crypto: exynos-rng - Rename Exynos to lowercaseKrzysztof Kozlowski1-1/+1
Fix up inconsistent usage of upper and lowercase letters in "Exynos" name. "EXYNOS" is not an abbreviation but a regular trademarked name. Therefore it should be written with lowercase letters starting with capital letter. The lowercase "Exynos" name is promoted by its manufacturer Samsung Electronics Co., Ltd., in advertisement materials and on website. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-12-27crypto: qce - allow building only hashes/ciphersEneas U de Queiroz1-4/+59
Allow the user to choose whether to build support for all algorithms (default), hashes-only, or skciphers-only. The QCE engine does not appear to scale as well as the CPU to handle multiple crypto requests. While the ipq40xx chips have 4-core CPUs, the QCE handles only 2 requests in parallel. Ipsec throughput seems to improve when disabling either family of algorithms, sharing the load with the CPU. Enabling skciphers-only appears to work best. Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-12-20crypto: inside-secure - add unspecified HAS_IOMEM dependencyBrendan Higgins1-1/+1
Currently CONFIG_CRYPTO_DEV_SAFEXCEL=y implicitly depends on CONFIG_HAS_IOMEM=y; consequently, on architectures without IOMEM we get the following build error: ld: drivers/crypto/inside-secure/safexcel.o: in function `safexcel_probe': drivers/crypto/inside-secure/safexcel.c:1692: undefined reference to `devm_platform_ioremap_resource' Fix the build error by adding the unspecified dependency. Reported-by: Brendan Higgins <brendanhiggins@google.com> Signed-off-by: Brendan Higgins <brendanhiggins@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-12-11crypto: Kconfig - Fix indentationKrzysztof Kozlowski1-11/+11
Adjust indentation from spaces to tab (+optional two spaces) as in coding style with command like: $ sed -e 's/^ /\t/' -i */Kconfig Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-27crypto: talitos - Fix build error by selecting LIB_DESHerbert Xu1-0/+1
The talitos driver needs to select LIB_DES as it needs calls des_expand_key. Fixes: 9d574ae8ebc1 ("crypto: talitos/des - switch to new...") Cc: <stable@vger.kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-22crypto: atmel - Fix build error of CRYPTO_AUTHENCYueHaibing1-4/+4
If CRYPTO_DEV_ATMEL_AUTHENC is m, CRYPTO_DEV_ATMEL_SHA is m, but CRYPTO_DEV_ATMEL_AES is y, building will fail: drivers/crypto/atmel-aes.o: In function `atmel_aes_authenc_init_tfm': atmel-aes.c:(.text+0x670): undefined reference to `atmel_sha_authenc_get_reqsize' atmel-aes.c:(.text+0x67a): undefined reference to `atmel_sha_authenc_spawn' drivers/crypto/atmel-aes.o: In function `atmel_aes_authenc_setkey': atmel-aes.c:(.text+0x7e5): undefined reference to `atmel_sha_authenc_setkey' Make CRYPTO_DEV_ATMEL_AUTHENC depend on CRYPTO_DEV_ATMEL_AES, and select CRYPTO_DEV_ATMEL_SHA and CRYPTO_AUTHENC for it under there. Reported-by: Hulk Robot <hulkci@huawei.com> Suggested-by: Herbert Xu <herbert@gondor.apana.org.au> Fixes: 89a82ef87e01 ("crypto: atmel-authenc - add support to...") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-17crypto: bcm-spu - switch to skcipher APIArd Biesheuvel1-1/+1
Commit 7a7ffe65c8c5 ("crypto: skcipher - Add top-level skcipher interface") dated 20 august 2015 introduced the new skcipher API which is supposed to replace both blkcipher and ablkcipher. While all consumers of the API have been converted long ago, some producers of the ablkcipher remain, forcing us to keep the ablkcipher support routines alive, along with the matching code to expose [a]blkciphers via the skcipher API. So switch this driver to the skcipher API, allowing us to finally drop the ablkcipher code in the near future. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-08crypto: atmel - Fix selection of CRYPTO_AUTHENCTudor Ambarus1-1/+1
The following error is raised when CONFIG_CRYPTO_DEV_ATMEL_AES=y and CONFIG_CRYPTO_DEV_ATMEL_AUTHENC=m: drivers/crypto/atmel-aes.o: In function `atmel_aes_authenc_setkey': atmel-aes.c:(.text+0x9bc): undefined reference to `crypto_authenc_extractkeys' Makefile:1094: recipe for target 'vmlinux' failed Fix it by moving the selection of CRYPTO_AUTHENC under config CRYPTO_DEV_ATMEL_AES. Fixes: 89a82ef87e01 ("crypto: atmel-authenc - add support to...") Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-01crypto: amcc - restore CRYPTO_AES dependencyChristian Lamparter1-0/+1
This patch restores the CRYPTO_AES dependency. This is necessary since some of the crypto4xx driver provided modes need functioning software fallbacks for AES-CTR/CCM and GCM. Fixes: da3e7a9715ea ("crypto: amcc - switch to AES library for GCM key derivation") Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Acked-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-01crypto: skcipher - rename the crypto_blkcipher module and kconfig optionEric Biggers1-25/+25
Now that the blkcipher algorithm type has been removed in favor of skcipher, rename the crypto_blkcipher kernel module to crypto_skcipher, and rename the config options accordingly: CONFIG_CRYPTO_BLKCIPHER => CONFIG_CRYPTO_SKCIPHER CONFIG_CRYPTO_BLKCIPHER2 => CONFIG_CRYPTO_SKCIPHER2 Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-01crypto: sun4i-ss - Move to Allwinner directoryCorentin Labbe1-26/+0
Since we have a dedicated Allwinner directory for crypto driver, move the sun4i-ss driver in it. Acked-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-01crypto: allwinner - Add allwinner subdirectoryCorentin Labbe1-0/+2
Since a second Allwinner crypto driver will be added, it is better to create a dedicated subdirectory. Acked-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-10-25crypto: amlogic - Add crypto accelerator for amlogic GXLCorentin Labbe1-0/+2
This patch adds support for the amlogic GXL cryptographic offloader present on GXL SoCs. This driver supports AES cipher in CBC/ECB mode. Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-10-04crypto: sun4i-ss - enable pm_runtimeCorentin Labbe1-0/+1
This patch enables power management on the Security System. sun4i-ss now depends on PM because it simplify code and prevent some ifdef. But this is not a problem since arch maintainer want ARCH_SUNXI to depend on PM in the future. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Acked-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-10-04crypto: inside-secure - Add CRYPTO_SHA3 to CRYPTO_DEV_SAFEXCELPascal van Leeuwen1-0/+1
Due to the addition of SHA3 and HMAC-SHA3 support to the inside-secure driver, it now depends on CRYPTO_SHA3. Added reference. changes since v1: - added missing dependency to crypto/Kconfig Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-10-04crypto: inside-secure - Add CRYPTO_CHACHA20POLY1305 to CRYPTO_DEV_SAFEXCELPascal van Leeuwen1-0/+1
Due to the addition of Chacha20-Poly1305 support to the inside-secure driver, it now depends on CRYPTO_CHACHA20POLY1305. Added reference. changes since v1: - added missing dependency to crypto/Kconfig changes since v2: - nothing changes since v3: - nothing Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-09-18Merge branch 'linus' of ↵Linus Torvalds1-28/+28
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "API: - Add the ability to abort a skcipher walk. Algorithms: - Fix XTS to actually do the stealing. - Add library helpers for AES and DES for single-block users. - Add library helpers for SHA256. - Add new DES key verification helper. - Add surrounding bits for ESSIV generator. - Add accelerations for aegis128. - Add test vectors for lzo-rle. Drivers: - Add i.MX8MQ support to caam. - Add gcm/ccm/cfb/ofb aes support in inside-secure. - Add ofb/cfb aes support in media-tek. - Add HiSilicon ZIP accelerator support. Others: - Fix potential race condition in padata. - Use unbound workqueues in padata" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (311 commits) crypto: caam - Cast to long first before pointer conversion crypto: ccree - enable CTS support in AES-XTS crypto: inside-secure - Probe transform record cache RAM sizes crypto: inside-secure - Base RD fetchcount on actual RD FIFO size crypto: inside-secure - Base CD fetchcount on actual CD FIFO size crypto: inside-secure - Enable extended algorithms on newer HW crypto: inside-secure: Corrected configuration of EIP96_TOKEN_CTRL crypto: inside-secure - Add EIP97/EIP197 and endianness detection padata: remove cpu_index from the parallel_queue padata: unbind parallel jobs from specific CPUs padata: use separate workqueues for parallel and serial work padata, pcrypt: take CPU hotplug lock internally in padata_alloc_possible crypto: pcrypt - remove padata cpumask notifier padata: make padata_do_parallel find alternate callback CPU workqueue: require CPU hotplug read exclusion for apply_workqueue_attrs workqueue: unconfine alloc/apply/free_workqueue_attrs() padata: allocate workqueue internally arm64: dts: imx8mq: Add CAAM node random: Use wait_event_freezable() in add_hwgenerator_randomness() crypto: ux500 - Fix COMPILE_TEST warnings ...
2019-09-13s390/crypto: Support for SHA3 via CPACF (MSA6)Joerg Schmidbauer1-0/+20
This patch introduces sha3 support for s390. - Rework the s390-specific SHA1 and SHA2 related code to provide the basis for SHA3. - Provide two new kernel modules sha3_256_s390 and sha3_512_s390 together with new kernel options. Signed-off-by: Joerg Schmidbauer <jschmidb@de.ibm.com> Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com> Reviewed-by: Harald Freudenberger <freude@linux.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2019-08-30crypto: inside-secure - make driver selectable for non-Marvell hardwarePascal van Leeuwen1-6/+6
While being a generic EIP97/EIP197 driver, the driver was only selectable for Marvell Armada hardware. This fix makes the driver selectable for any Device Tree supporting kernel configuration, allowing it to be used for other compatible hardware by just adding the correct device tree entry. It also allows the driver to be selected for PCI(E) supporting kernel con- figurations, to be able to use it with PCIE based FPGA development boards for pre-silicon driver development by both Inside Secure and its IP custo- mers. Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com> Acked-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-08-30crypto: picoxcell - Fix the name of the module in the description of ↵Christophe JAILLET1-1/+1
CRYPTO_DEV_PICOXCELL The help section says that the module will be called 'pipcoxcell_crypto'. This is likely a typo. Use 'picoxcell_crypto' instead Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-08-22crypto: des - split off DES library from generic DES cipher driverArd Biesheuvel1-14/+14
Another one for the cipher museum: split off DES core processing into a separate module so other drivers (mostly for crypto accelerators) can reuse the code without pulling in the generic DES cipher itself. This will also permit the cipher interface to be made private to the crypto API itself once we move the only user in the kernel (CIFS) to this library interface. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-07-27crypto: ghash - add comment and improve help textEric Biggers1-3/+3
To help avoid confusion, add a comment to ghash-generic.c which explains the convention that the kernel's implementation of GHASH uses. Also update the Kconfig help text and module descriptions to call GHASH a "hash function" rather than a "message digest", since the latter normally means a real cryptographic hash function, which GHASH is not. Cc: Pascal Van Leeuwen <pvanleeuwen@verimatrix.com> Signed-off-by: Eric Biggers <ebiggers@google.com> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Pascal Van Leeuwen <pvanleeuwen@verimatrix.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-07-26crypto: amcc - switch to AES library for GCM key derivationArd Biesheuvel1-1/+1
The AMCC code for GCM key derivation allocates a AES cipher to perform a single block encryption. So let's switch to the new and more lightweight AES library instead. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-07-26crypto: safexcel/aes - switch to library version of key expansion routineArd Biesheuvel1-1/+1
Switch to the new AES library that also provides an implementation of the AES key expansion routine. This removes the dependency on the generic AES cipher, allowing it to be omitted entirely in the future. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-07-26crypto: cesa/aes - switch to library version of key expansion routineArd Biesheuvel1-1/+1
Switch to the new AES library that also provides an implementation of the AES key expansion routine. This removes the dependency on the generic AES cipher, allowing it to be omitted entirely in the future. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-07-26crypto: padlock/aes - switch to library version of key expansion routineArd Biesheuvel1-1/+1
Switch to the new AES library that also provides an implementation of the AES key expansion routine. This removes the dependency on the generic AES cipher, allowing it to be omitted entirely in the future. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-07-09Merge branch 'linus' of ↵Linus Torvalds1-1/+19
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "Here is the crypto update for 5.3: API: - Test shash interface directly in testmgr - cra_driver_name is now mandatory Algorithms: - Replace arc4 crypto_cipher with library helper - Implement 5 way interleave for ECB, CBC and CTR on arm64 - Add xxhash - Add continuous self-test on noise source to drbg - Update jitter RNG Drivers: - Add support for SHA204A random number generator - Add support for 7211 in iproc-rng200 - Fix fuzz test failures in inside-secure - Fix fuzz test failures in talitos - Fix fuzz test failures in qat" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (143 commits) crypto: stm32/hash - remove interruptible condition for dma crypto: stm32/hash - Fix hmac issue more than 256 bytes crypto: stm32/crc32 - rename driver file crypto: amcc - remove memset after dma_alloc_coherent crypto: ccp - Switch to SPDX license identifiers crypto: ccp - Validate the the error value used to index error messages crypto: doc - Fix formatting of new crypto engine content crypto: doc - Add parameter documentation crypto: arm64/aes-ce - implement 5 way interleave for ECB, CBC and CTR crypto: arm64/aes-ce - add 5 way interleave routines crypto: talitos - drop icv_ool crypto: talitos - fix hash on SEC1. crypto: talitos - move struct talitos_edesc into talitos.h lib/scatterlist: Fix mapping iterator when sg->offset is greater than PAGE_SIZE crypto/NX: Set receive window credits to max number of CRBs in RxFIFO crypto: asymmetric_keys - select CRYPTO_HASH where needed crypto: serpent - mark __serpent_setkey_sbox noinline crypto: testmgr - dynamically allocate crypto_shash crypto: testmgr - dynamically allocate testvec_config crypto: talitos - eliminate unneeded 'done' functions at build time ...
2019-06-06crypto: atmel-i2c - Fix build error while CRC16 set to mYueHaibing1-0/+1
If CRYPTO_DEV_ATMEL_ECC is set m, which select CRC16 to m, while CRYPTO_DEV_ATMEL_SHA204A is set to y, building fails. drivers/crypto/atmel-i2c.o: In function 'atmel_i2c_checksum': atmel-i2c.c:(.text+0x16): undefined reference to 'crc16' Add CRC16 dependency to CRYPTO_DEV_ATMEL_SHA204A Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: da001fb651b0 ("crypto: atmel-i2c - add support for SHA204A random number generator") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-05-30crypto: atmel-i2c - add support for SHA204A random number generatorArd Biesheuvel1-0/+14
The Linaro/96boards Secure96 mezzanine contains (among other things) an Atmel SHA204A symmetric crypto processor. This chip implements a number of different functionalities, but one that is highly useful for many different 96boards platforms is the random number generator. So let's implement a driver for the SHA204A, and for the time being, implement support for the random number generator only. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-05-30crypto: atmel-ecc - factor out code that can be sharedArd Biesheuvel1-0/+4
In preparation of adding support for the random number generator in Atmel atsha204a devices, refactor the existing atmel-ecc driver (which drives hardware that is closely related) so we can share the basic I2C and command queuing routines. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-05-30crypto: atmel-ecc - add support for ACPI probing on non-AT91 platformsArd Biesheuvel1-1/+0
The Atmel/Microchip EC508A is a I2C device that could be wired into any platform, and is being used on the Linaro/96boards Secure96 mezzanine adapter. This means it could be found on any platform, even on ones that use ACPI enumeration (via PRP0001 devices). So update the code to enable this use case. This involves tweaking the bus rate discovery code to take ACPI probing into account, which records the maximum bus rate as a property of the slave device. For the atmel-ecc code, this means that the effective bus rate should never exceed the maximum rate, unless we are dealing with buggy firmware. Nonetheless, let's just use the existing plumbing to discover the bus rate and keep the existing logic intact. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner1-0/+1
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-16crypto: mxc-scc - Remove broken driverHerbert Xu1-9/+0
This driver has been completely broken since the very beginning because it doesn't even have a setkey function. This means that nobody has ever used it as it would crash during setkey. This patch removes this driver. Fixes: d293b640ebd5 ("crypto: mxc-scc - add basic driver for the...") Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-01-10crypto: bcm - convert to use crypto_authenc_extractkeys()Eric Biggers1-0/+1
Convert the bcm crypto driver to use crypto_authenc_extractkeys() so that it picks up the fix for broken validation of rtattr::rta_len. This also fixes the DES weak key check to actually be done on the right key. (It was checking the authentication key, not the encryption key...) Fixes: 9d12ba86f818 ("crypto: brcm - Add Broadcom SPU driver") Cc: <stable@vger.kernel.org> # v4.11+ Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-17 17:48:24 +0300