summaryrefslogtreecommitdiff
path: root/drivers/cpufreq
AgeCommit message (Collapse)AuthorFilesLines
2020-08-04Merge branch 'cpufreq/arm/linux-next' of ↵Rafael J. Wysocki12-101/+595
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm Pull ARM cpufreq driver changes for v5.9-rc1 from Viresh Kumar: "Here are the details: - Adaptive voltage scaling (AVS) support and minor cleanups for brcmstb driver (Florian Fainelli and Markus Mayer). - A new tegra driver and cleanup for the existing one (Sumit Gupta and Jon Hunter). - Bandwidth level support for Qcom driver along with OPP changes (Sibi Sankar). - Cleanups to sti, cpufreq-dt, ap806, CPPC drivers (Viresh Kumar, Lee Jones, Ivan Kokshaysky, Sven Auhagen, and Xin Hao). - Make schedutil default governor for ARM (Valentin Schneider). - Fix dependency issues for imx (Walter Lozano). - Cleanup around cached_resolved_idx in cpufreq core (Viresh Kumar)." * 'cpufreq/arm/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm: cpufreq: make schedutil the default for arm and arm64 cpufreq: cached_resolved_idx can not be negative cpufreq: Add Tegra194 cpufreq driver dt-bindings: arm: Add NVIDIA Tegra194 CPU Complex binding cpufreq: imx: Select NVMEM_IMX_OCOTP cpufreq: sti-cpufreq: Fix some formatting and misspelling issues cpufreq: tegra186: Simplify probe return path cpufreq: CPPC: Reuse caps variable in few routines cpufreq: ap806: fix cpufreq driver needs ap cpu clk cpufreq: cppc: Reorder code and remove apply_hisi_workaround variable cpufreq: dt: fix oops on armada37xx cpufreq: brcmstb-avs-cpufreq: send S2_ENTER / S2_EXIT commands to AVS cpufreq: brcmstb-avs-cpufreq: Support polling AVS firmware cpufreq: brcmstb-avs-cpufreq: more flexible interface for __issue_avs_command() cpufreq: qcom: Disable fast switch when scaling DDR/L3 cpufreq: qcom: Update the bandwidth levels on frequency change OPP: Add and export helper to set bandwidth cpufreq: blacklist SC7180 in cpufreq-dt-platdev cpufreq: blacklist SDM845 in cpufreq-dt-platdev
2020-08-04cpufreq: intel_pstate: Fix cpuinfo_max_freq when MSR_TURBO_RATIO_LIMIT is 0Srinivas Pandruvada1-0/+1
The MSR_TURBO_RATIO_LIMIT can be 0. This is not an error. User can update this MSR via BIOS settings on some systems or can use msr tools to update. Also some systems boot with value = 0. This results in display of cpufreq/cpuinfo_max_freq wrong. This value will be equal to cpufreq/base_frequency, even though turbo is enabled. But platform will still function normally in HWP mode as we get max 1-core frequency from the MSR_HWP_CAPABILITIES. This MSR is already used to calculate cpu->pstate.turbo_freq, which is used for to set policy->cpuinfo.max_freq. But some other places cpu->pstate.turbo_pstate is used. For example to set policy->max. To fix this, also update cpu->pstate.turbo_pstate when updating cpu->pstate.turbo_freq. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-08-04Merge tag 'pm-5.9-rc1' of ↵Linus Torvalds24-217/+262
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael Wysocki: "The most significant change here is the extension of the Energy Model to cover non-CPU devices (as well as CPUs) from Lukasz Luba. There is also some new hardware support (Ice Lake server idle states table for intel_idle, Sapphire Rapids and Power Limit 4 support in the RAPL driver), some new functionality in the existing drivers (eg. a new switch to disable/enable CPU energy-efficiency optimizations in intel_pstate, delayed timers in devfreq), some assorted fixes (cpufreq core, intel_pstate, intel_idle) and cleanups (eg. cpuidle-psci, devfreq), including the elimination of W=1 build warnings from cpufreq done by Lee Jones. Specifics: - Make the Energy Model cover non-CPU devices (Lukasz Luba). - Add Ice Lake server idle states table to the intel_idle driver and eliminate a redundant static variable from it (Chen Yu, Rafael Wysocki). - Eliminate all W=1 build warnings from cpufreq (Lee Jones). - Add support for Sapphire Rapids and for Power Limit 4 to the Intel RAPL power capping driver (Sumeet Pawnikar, Zhang Rui). - Fix function name in kerneldoc comments in the idle_inject power capping driver (Yangtao Li). - Fix locking issues with cpufreq governors and drop a redundant "weak" function definition from cpufreq (Viresh Kumar). - Rearrange cpufreq to register non-modular governors at the core_initcall level and allow the default cpufreq governor to be specified in the kernel command line (Quentin Perret). - Extend, fix and clean up the intel_pstate driver (Srinivas Pandruvada, Rafael Wysocki): * Add a new sysfs attribute for disabling/enabling CPU energy-efficiency optimizations in the processor. * Make the driver avoid enabling HWP if EPP is not supported. * Allow the driver to handle numeric EPP values in the sysfs interface and fix the setting of EPP via sysfs in the active mode. * Eliminate a static checker warning and clean up a kerneldoc comment. - Clean up some variable declarations in the powernv cpufreq driver (Wei Yongjun). - Fix up the ->enter_s2idle callback definition to cover the case when it points to the same function as ->idle correctly (Neal Liu). - Rearrange and clean up the PSCI cpuidle driver (Ulf Hansson). - Make the PM core emit "changed" uevent when adding/removing the "wakeup" sysfs attribute of devices (Abhishek Pandit-Subedi). - Add a helper macro for declaring PM callbacks and use it in the MMC jz4740 driver (Paul Cercueil). - Fix white space in some places in the hibernate code and make the system-wide PM code use "const char *" where appropriate (Xiang Chen, Alexey Dobriyan). - Add one more "unsafe" helper macro to the freezer to cover the NFS use case (He Zhe). - Change the language in the generic PM domains framework to use parent/child terminology and clean up a typo and some comment fromatting in that code (Kees Cook, Geert Uytterhoeven). - Update the operating performance points OPP framework (Lukasz Luba, Andrew-sh.Cheng, Valdis Kletnieks): * Refactor dev_pm_opp_of_register_em() and update related drivers. * Add a missing function export. * Allow disabled OPPs in dev_pm_opp_get_freq(). - Update devfreq core and drivers (Chanwoo Choi, Lukasz Luba, Enric Balletbo i Serra, Dmitry Osipenko, Kieran Bingham, Marc Zyngier): * Add support for delayed timers to the devfreq core and make the Samsung exynos5422-dmc driver use it. * Unify sysfs interface to use "df-" as a prefix in instance names consistently. * Fix devfreq_summary debugfs node indentation. * Add the rockchip,pmu phandle to the rk3399_dmc driver DT bindings. * List Dmitry Osipenko as the Tegra devfreq driver maintainer. * Fix typos in the core devfreq code. - Update the pm-graph utility to version 5.7 including a number of fixes related to suspend-to-idle (Todd Brandt). - Fix coccicheck errors and warnings in the cpupower utility (Shuah Khan). - Replace HTTP links with HTTPs ones in multiple places (Alexander A. Klimov)" * tag 'pm-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (71 commits) cpuidle: ACPI: fix 'return' with no value build warning cpufreq: intel_pstate: Fix EPP setting via sysfs in active mode cpufreq: intel_pstate: Rearrange the storing of new EPP values intel_idle: Customize IceLake server support PM / devfreq: Fix the wrong end with semicolon PM / devfreq: Fix indentaion of devfreq_summary debugfs node PM / devfreq: Clean up the devfreq instance name in sysfs attr memory: samsung: exynos5422-dmc: Add module param to control IRQ mode memory: samsung: exynos5422-dmc: Adjust polling interval and uptreshold memory: samsung: exynos5422-dmc: Use delayed timer as default PM / devfreq: Add support delayed timer for polling mode dt-bindings: devfreq: rk3399_dmc: Add rockchip,pmu phandle PM / devfreq: tegra: Add Dmitry as a maintainer PM / devfreq: event: Fix trivial spelling PM / devfreq: rk3399_dmc: Fix kernel oops when rockchip,pmu is absent cpuidle: change enter_s2idle() prototype cpuidle: psci: Prevent domain idlestates until consumers are ready cpuidle: psci: Convert PM domain to platform driver cpuidle: psci: Fix error path via converting to a platform driver cpuidle: psci: Fail cpuidle registration if set OSI mode failed ...
2020-08-04Merge tag 'arm-drivers-5.9' of ↵Linus Torvalds1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC driver updates from Arnd Bergmann: "A couple of subsystems have their own subsystem maintainers but choose to have the code merged through the soc tree as upstream, as the code tends to be used across multiple SoCs or has SoC specific drivers itself: - memory controllers: Krzysztof Kozlowski takes ownership of the drivers/memory subsystem and its drivers, starting out with a set of cleanup patches. A larger driver for the Tegra memory controller that was accidentally missed for v5.8 is now added. - reset controllers: Only minor updates to drivers/reset this time - firmware: The "turris mox" firmware driver gains support for signed firmware blobs The tegra firmware driver gets extended to export some debug information Various updates to i.MX firmware drivers, mostly cosmetic - ARM SCMI/SCPI: A new mechanism for platform notifications is added, among a number of minor changes. - optee: Probing of the TEE bus is rewritten to better support detection of devices that depend on the tee-supplicant user space. A new firmware based trusted platform module (fTPM) driver is added based on OP-TEE - SoC attributes: A new driver is added to provide a generic soc_device for identifying a machine through the SMCCC ARCH_SOC_ID firmware interface rather than by probing SoC family specific registers. The series also contains some cleanups to the common soc_device code. There are also a number of updates to SoC specific drivers, the main ones are: - Mediatek cmdq driver gains a few in-kernel interfaces - Minor updates to Qualcomm RPMh, socinfo, rpm drivers, mostly adding support for additional SoC variants - The Qualcomm GENI core code gains interconnect path voting and performance level support, and integrating this into a number of device drivers. - A new driver for Samsung Exynos5800 voltage coupler for - Renesas RZ/G2H (R8A774E1) SoC support gets added to a couple of SoC specific device drivers - Updates to the TI K3 Ring Accelerator driver" * tag 'arm-drivers-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (164 commits) soc: qcom: geni: Fix unused label warning soc: qcom: smd-rpm: Fix kerneldoc memory: jz4780_nemc: Only request IO memory the driver will use soc: qcom: pdr: Reorder the PD state indication ack MAINTAINERS: Add Git repository for memory controller drivers memory: brcmstb_dpfe: Fix language typo memory: samsung: exynos5422-dmc: Correct white space issues memory: samsung: exynos-srom: Correct alignment memory: pl172: Enclose macro argument usage in parenthesis memory: of: Correct kerneldoc memory: omap-gpmc: Fix language typo memory: omap-gpmc: Correct white space issues memory: omap-gpmc: Use 'unsigned int' for consistency memory: omap-gpmc: Enclose macro argument usage in parenthesis memory: omap-gpmc: Correct kerneldoc memory: mvebu-devbus: Align with open parenthesis memory: mvebu-devbus: Add missing braces to all arms of if statement memory: bt1-l2-ctl: Add blank lines after declarations soc: TI knav_qmss: make symbol 'knav_acc_range_ops' static firmware: ti_sci: Replace HTTP links with HTTPS ones ...
2020-08-04Merge tag 'rm-unicore32' of ↵Linus Torvalds2-77/+0
git://git.kernel.org/pub/scm/linux/kernel/git/rppt/linux Pull unicore32 removal from Mike Rapoport: "Remove unicore32 support. The unicore32 port do not seem maintained for a long time now, there is no upstream toolchain that can create unicore32 binaries and all the links to prebuilt toolchains for unicore32 are dead. Even compilers that were available are not supported by the kernel anymore. Guenter Roeck says: "I have stopped building unicore32 images since v4.19 since there is no available compiler that is still supported by the kernel. I am surprised that support for it has not been removed from the kernel" However, it's worth pointing out two things: - Guan Xuetao is still listed as maintainer and asked for the port to be kept around the last time Arnd suggested removing it two years ago. He promised that there would be compiler sources (presumably llvm), but has not made those available since. - https://github.com/gxt has patches to linux-4.9 and qemu-2.7, both released in 2016, with patches dated early 2019. These patches mainly restore a syscall ABI that was never part of mainline Linux but apparently used in production. qemu-2.8 removed support for that ABI and newer kernels (4.19+) can no longer be built with the old toolchain, so apparently there will not be any future updates to that git tree" * tag 'rm-unicore32' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/linux: MAINTAINERS: remove "PKUNITY SOC DRIVERS" entry rtc: remove fb-puv3 driver video: fbdev: remove fb-puv3 driver pwm: remove pwm-puv3 driver input: i8042: remove support for 8042-unicore32io i2c/buses: remove i2c-puv3 driver cpufreq: remove unicore32 driver arch: remove unicore32 port
2020-08-03Merge branch 'pm-cpufreq'Rafael J. Wysocki16-202/+252
* pm-cpufreq: (24 commits) cpufreq: intel_pstate: Fix EPP setting via sysfs in active mode cpufreq: intel_pstate: Rearrange the storing of new EPP values cpufreq: intel_pstate: Avoid enabling HWP if EPP is not supported cpufreq: intel_pstate: Clean up aperf_mperf_shift description cpufreq: powernv: Make some symbols static cpufreq: amd_freq_sensitivity: Mark sometimes used ID structs as __maybe_unused cpufreq: intel_pstate: Supply struct attribute description for get_aperf_mperf_shift() cpufreq: pcc-cpufreq: Mark sometimes used ID structs as __maybe_unused cpufreq: powernow-k8: Mark 'hi' and 'lo' dummy variables as __always_unused cpufreq: acpi-cpufreq: Mark sometimes used ID structs as __maybe_unused cpufreq: acpi-cpufreq: Mark 'dummy' variable as __always_unused cpufreq: powernv-cpufreq: Fix a bunch of kerneldoc related issues cpufreq: pasemi: Include header file for {check,restore}_astate prototypes cpufreq: cpufreq_governor: Demote store_sampling_rate() header to standard comment block cpufreq: cpufreq: Demote lots of function headers unworthy of kerneldoc status cpufreq: freq_table: Demote obvious misuse of kerneldoc to standard comment blocks cpufreq: Replace HTTP links with HTTPS ones cpufreq: intel_pstate: Fix static checker warning for epp variable cpufreq: Remove the weakly defined cpufreq_default_governor() cpufreq: Specify default governor on command line ...
2020-08-03Merge branches 'pm-em' and 'pm-core'Rafael J. Wysocki8-15/+10
* pm-em: OPP: refactor dev_pm_opp_of_register_em() and update related drivers Documentation: power: update Energy Model description PM / EM: change name of em_pd_energy to em_cpu_energy PM / EM: remove em_register_perf_domain PM / EM: add support for other devices than CPUs in Energy Model PM / EM: update callback structure and add device pointer PM / EM: introduce em_dev_register_perf_domain function PM / EM: change naming convention from 'capacity' to 'performance' * pm-core: mmc: jz4740: Use pm_ptr() macro PM: Make *_DEV_PM_OPS macros use __maybe_unused PM: core: introduce pm_ptr() macro
2020-07-30cpufreq: intel_pstate: Fix EPP setting via sysfs in active modeRafael J. Wysocki1-5/+12
Because intel_pstate_set_energy_pref_index() reads and writes the MSR_HWP_REQUEST register without using the cached value of it used by intel_pstate_hwp_boost_up() and intel_pstate_hwp_boost_down(), those functions may overwrite the value written by it and so the EPP value set via sysfs may be lost. To avoid that, make intel_pstate_set_energy_pref_index() take the cached value of MSR_HWP_REQUEST just like the other two routines mentioned above and update it with the new EPP value coming from user space in addition to updating the MSR. Note that the MSR itself still needs to be updated too in case hwp_boost is unset or the boosting mechanism is not active at the EPP change time. Fixes: e0efd5be63e8 ("cpufreq: intel_pstate: Add HWP boost utility and sched util hooks") Reported-by: Francisco Jerez <currojerez@riseup.net> Cc: 4.18+ <stable@vger.kernel.org> # 4.18+: 3da97d4db8ee cpufreq: intel_pstate: Rearrange ... Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Francisco Jerez <currojerez@riseup.net>
2020-07-30cpufreq: intel_pstate: Rearrange the storing of new EPP valuesRafael J. Wysocki1-20/+15
Move the locking away from intel_pstate_set_energy_pref_index() into its only caller and drop the (now redundant) return_pref label from it. Also move the "raw" EPP value check into the caller of that function, so as to do it before acquiring the mutex, and reduce code duplication related to the "raw" EPP values processing somewhat. No intentional functional impact. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Francisco Jerez <currojerez@riseup.net>
2020-07-30cpufreq: make schedutil the default for arm and arm64Valentin Schneider1-1/+1
schedutil is already a hard-requirement for EAS, which has lead to making it default on arm (when CONFIG_BIG_LITTLE), see: commit 8fdcca8e254a ("cpufreq: Select schedutil when using big.LITTLE") One thing worth pointing out is that schedutil isn't only relevant for asymmetric CPU capacity systems; for instance, schedutil is the only governor that honours util-clamp performance requests. Another good example of this is x86 switching to using it by default in: commit a00ec3874e7d ("cpufreq: intel_pstate: Select schedutil as the default governor") Arguably it should be made the default for all architectures, but it seems better to wait for them to also gain frequency invariance powers. Make it the default for arm && arm64 for now. Signed-off-by: Valentin Schneider <valentin.schneider@arm.com> Signed-off-by: Ionela Voinescu <ionela.voinescu@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2020-07-30cpufreq: cached_resolved_idx can not be negativeViresh Kumar2-5/+2
It is not possible for cached_resolved_idx to be invalid here as the cpufreq core always sets index to a positive value. Change its type to unsigned int and fix qcom usage a bit. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2020-07-30cpufreq: Add Tegra194 cpufreq driverSumit Gupta3-0/+398
Add support for CPU frequency scaling on Tegra194. The frequency of each core can be adjusted by writing a clock divisor value to a MSR on the core. The range of valid divisors is queried from the BPMP. Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> Signed-off-by: Sumit Gupta <sumitg@nvidia.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2020-07-30cpufreq: imx: Select NVMEM_IMX_OCOTPWalter Lozano1-0/+1
When probing cpufreq for iMX6 the values in the efuse needs to be read which requires NVMEM_IMX_OCOTP. If this option is not enabled, the probe will be deferred forever and cpufreq won't be available. This patch forces the selection of the required configuration option. Signed-off-by: Walter Lozano <walter.lozano@collabora.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2020-07-30cpufreq: sti-cpufreq: Fix some formatting and misspelling issuesLee Jones1-4/+4
Kerneldoc format for attribute descriptions should be '@.*: '. Fixes the following W=1 kernel build warning(s): drivers/cpufreq/sti-cpufreq.c:49: warning: cannot understand function prototype: 'struct sti_cpufreq_ddata ' Signed-off-by: Lee Jones <lee.jones@linaro.org> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Pal Singh <ajitpal.singh@st.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2020-07-30cpufreq: tegra186: Simplify probe return pathJon Hunter1-6/+0
We always put the reference to BPMP device on exit of the Tegra186 CPUFREQ driver and so there is no need to have separate exit paths for success and failure. Therefore, simplify the probe return path in the Tegra186 CPUFREQ driver by combining the success and failure paths. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2020-07-30cpufreq: CPPC: Reuse caps variable in few routinesXin Hao1-2/+2
The 'caps' variable has been defined in cppc_cpufreq_khz_to_perf() and cppc_cpufreq_perf_to_khz() routines, so there is no need to get 'highest_perf' value through 'cpu->caps.highest_perf', we can use 'caps->highest_perf' instead. Signed-off-by: Xin Hao <xhao@linux.alibaba.com> [ Viresh: Updated commit log ] Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2020-07-30cpufreq: ap806: fix cpufreq driver needs ap cpu clkSven Auhagen1-0/+1
The Armada 8K cpufreq driver needs the Armada AP CPU CLK to work. This dependency is currently not satisfied and the ARMADA_AP_CPU_CLK can not be selected independently. Add it to the cpufreq Armada8k driver. Fixes: f525a670533d ("cpufreq: ap806: add cpufreq driver for Armada 8K") Signed-off-by: Sven Auhagen <sven.auhagen@voleatech.de> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2020-07-30cpufreq: cppc: Reorder code and remove apply_hisi_workaround variableViresh Kumar1-49/+42
With the current approach we have an extra check in the cppc_cpufreq_get_rate() callback, which checks if hisilicon's get rate implementation should be used instead. While it works fine, the approach isn't very straight forward, over that we have an extra check in the routine. Rearrange code and update the cpufreq driver's get() callback pointer directly for the hisilicon case. This gets the extra variable is removed and the extra check isn't required anymore as well. Tested-by: Xiongfeng Wang <wangxiongfeng2@huawei.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2020-07-30cpufreq: dt: fix oops on armada37xxIvan Kokshaysky1-0/+1
Commit 0c868627e617e43a295d8 (cpufreq: dt: Allow platform specific intermediate callbacks) added two function pointers to the struct cpufreq_dt_platform_data. However, armada37xx_cpufreq_driver_init() has this struct (pdata) located on the stack and uses only "suspend" and "resume" fields. So these newly added "get_intermediate" and "target_intermediate" pointers are uninitialized and contain arbitrary non-null values, causing all kinds of trouble. For instance, here is an oops on espressobin after an attempt to change the cpefreq governor: [ 29.174554] Unable to handle kernel execute from non-executable memory at virtual address ffff00003f87bdc0 ... [ 29.269373] pc : 0xffff00003f87bdc0 [ 29.272957] lr : __cpufreq_driver_target+0x138/0x580 ... Fixed by zeroing out pdata before use. Cc: <stable@vger.kernel.org> # v5.7+ Signed-off-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2020-07-30cpufreq: brcmstb-avs-cpufreq: send S2_ENTER / S2_EXIT commands to AVSMarkus Mayer1-1/+11
On suspend we send AVS_CMD_S2_ENTER and on resume AVS_CMD_S2_EXIT. These are best effort calls, so we don't check the return code or take any action if either of the calls fails. Signed-off-by: Markus Mayer <mmayer@broadcom.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2020-07-30cpufreq: brcmstb-avs-cpufreq: Support polling AVS firmwareFlorian Fainelli1-13/+34
In case the interrupt towards the host is never raised, yet the AVS firmware responds correctly within the alloted time, allow supporting a polling mode. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Markus Mayer <mmayer@broadcom.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2020-07-30cpufreq: brcmstb-avs-cpufreq: more flexible interface for __issue_avs_command()Markus Mayer1-16/+14
We are changing how parameters are passed to __issue_avs_command(), so we can pass input *and* output arguments with the same command, rather than just one or the other. Signed-off-by: Markus Mayer <mmayer@broadcom.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2020-07-30cpufreq: qcom: Disable fast switch when scaling DDR/L3Sibi Sankar1-2/+1
Disable fast switch when the opp-tables required for scaling DDR/L3 are populated. Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2020-07-30cpufreq: qcom: Update the bandwidth levels on frequency changeSibi Sankar1-2/+81
Add support to parse optional OPP table attached to the cpu node when the OPP bandwidth values are populated. This allows for scaling of DDR/L3 bandwidth levels with frequency change. Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2020-07-27Merge back cpufreq material for v5.9.Rafael J. Wysocki16-189/+237
2020-07-16cpufreq: intel_pstate: Avoid enabling HWP if EPP is not supportedRafael J. Wysocki1-1/+6
Although there are processors supporting hardware-managed P-states (HWP) without the energy-performance preference (EPP) feature, they are not expected to be run with HWP enabled (the BIOS should disable HWP on those systems). Missing EPP support generally indicates an incomplete HWP implementation and so it is better to avoid using HWP on those systems in production. However, intel_pstate currently enables HWP on such systems, which is questionable, so prevent it from doing that by making it check EPP support before enabling HWP and avoid enabling it if EPP is not supported by the processor at hand. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-16cpufreq: intel_pstate: Clean up aperf_mperf_shift descriptionRafael J. Wysocki1-3/+1
The kerneldoc description of the aperf_mperf_shift field in struct global_params is unclear and there is a typo in it, so simplify it and clean it up. Reported-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Lee Jones <lee.jones@linaro.org>
2020-07-15cpufreq: powernv: Make some symbols staticWei Yongjun1-4/+4
The sparse tool complains as follows: drivers/cpufreq/powernv-cpufreq.c:88:1: warning: symbol 'pstate_revmap' was not declared. Should it be static? drivers/cpufreq/powernv-cpufreq.c:383:18: warning: symbol 'cpufreq_freq_attr_cpuinfo_nominal_freq' was not declared. Should it be static? drivers/cpufreq/powernv-cpufreq.c:669:6: warning: symbol 'gpstate_timer_handler' was not declared. Should it be static? drivers/cpufreq/powernv-cpufreq.c:902:6: warning: symbol 'powernv_cpufreq_work_fn' was not declared. Should it be static? Those symbols are not used outside of this file, so mark them static. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-15cpufreq: amd_freq_sensitivity: Mark sometimes used ID structs as __maybe_unusedLee Jones1-1/+1
ot used when MODULE is not defined. Fixes the following W=1 kernel build warning(s): drivers/cpufreq/amd_freq_sensitivity.c:147:32: warning: ‘amd_freq_sensitivity_ids’ defined but not used [-Wunused-const-variable=] 147 | static const struct x86_cpu_id amd_freq_sensitivity_ids[] = { | ^~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-15cpufreq: intel_pstate: Supply struct attribute description for ↵Lee Jones1-0/+1
get_aperf_mperf_shift() Fixes the following W=1 kernel build warning(s): drivers/cpufreq/intel_pstate.c:293: warning: Function parameter or member 'get_aperf_mperf_shift' not described in 'pstate_funcs' Suggested-by: "Rafael J. Wysocki" <rafael@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> [ rjw: Remove line break ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-15cpufreq: pcc-cpufreq: Mark sometimes used ID structs as __maybe_unusedLee Jones1-1/+1
Not used when MODULE is not defined. Fixes the following W=1 kernel build warning(s): drivers/cpufreq/pcc-cpufreq.c:619:36: warning: ‘processor_device_ids’ defined but not used [-Wunused-const-variable=] 619 | static const struct acpi_device_id processor_device_ids[] = { | ^~~~~~~~~~~~~~~~~~~~ Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-15cpufreq: powernow-k8: Mark 'hi' and 'lo' dummy variables as __always_unusedLee Jones1-2/+2
if we fail to use a variable, even a dummy ones, then the compiler complains that it is set but not used. We know this is fine, so we set them as __always_unused here to let the compiler know. Fixes the following W=1 kernel build warning(s): drivers/cpufreq/powernow-k8.c: In function ‘pending_bit_stuck’: drivers/cpufreq/powernow-k8.c:89:10: warning: variable ‘hi’ set but not used [-Wunused-but-set-variable] 89 | u32 lo, hi; | ^~ drivers/cpufreq/powernow-k8.c: In function ‘core_voltage_pre_transition’: drivers/cpufreq/powernow-k8.c:285:14: warning: variable ‘lo’ set but not used [-Wunused-but-set-variable] 285 | u32 maxvid, lo, rvomult = 1; | ^~ Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-15cpufreq: acpi-cpufreq: Mark sometimes used ID structs as __maybe_unusedLee Jones1-2/+2
Not used when MODULE is not defined. Fixes the following W=1 kernel build warning(s): drivers/cpufreq/acpi-cpufreq.c:1004:36: warning: ‘processor_device_ids’ defined but not used [-Wunused-const-variable=] 997 | static const struct x86_cpu_id acpi_cpufreq_ids[] = { | ^~~~~~~~~~~~~~~~ drivers/cpufreq/acpi-cpufreq.c:997:32: warning: ‘acpi_cpufreq_ids’ defined but not used [-Wunused-const-variable=] 619 | static const struct acpi_device_id processor_device_ids[] = { | ^~~~~~~~~~~~~~~~~~~~ Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-15cpufreq: acpi-cpufreq: Mark 'dummy' variable as __always_unusedLee Jones1-2/+2
If we fail to use a variable, even a 'dummy' one, then the compiler complains that it is set but not used. We know this is fine, so we set it as __always_unused to let the compiler know. Fixes the following W=1 kernel build warning(s): drivers/cpufreq/acpi-cpufreq.c: In function ‘cpu_freq_read_intel’: drivers/cpufreq/acpi-cpufreq.c:247:11: warning: variable ‘dummy’ set but not used [-Wunused-but-set-variable] drivers/cpufreq/acpi-cpufreq.c: In function ‘cpu_freq_read_amd’: drivers/cpufreq/acpi-cpufreq.c:265:11: warning: variable ‘dummy’ set but not used [-Wunused-but-set-variable] Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-15cpufreq: powernv-cpufreq: Fix a bunch of kerneldoc related issuesLee Jones1-5/+6
Repair problems with formatting and missing attributes/parameters, and demote header comments which do not meet the required standards applicable to kerneldoc. Fixes the following W=1 kernel build warning(s): drivers/cpufreq/powernv-cpufreq.c:84: warning: Function parameter or member 'last_lpstate_idx' not described in 'global_pstate_info' drivers/cpufreq/powernv-cpufreq.c:84: warning: Function parameter or member 'last_gpstate_idx' not described in 'global_pstate_info' drivers/cpufreq/powernv-cpufreq.c:84: warning: Function parameter or member 'policy' not described in 'global_pstate_info' drivers/cpufreq/powernv-cpufreq.c:182: warning: Function parameter or member 'i' not described in 'idx_to_pstate' drivers/cpufreq/powernv-cpufreq.c:201: warning: Function parameter or member 'pstate' not described in 'pstate_to_idx' drivers/cpufreq/powernv-cpufreq.c:670: warning: Function parameter or member 't' not described in 'gpstate_timer_handler' drivers/cpufreq/powernv-cpufreq.c:670: warning: Excess function parameter 'data' description in 'gpstate_timer_handler' Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-15cpufreq: pasemi: Include header file for {check,restore}_astate prototypesLee Jones1-0/+2
If function callers and providers do not share the same prototypes the compiler complains of missing prototypes. Fix this by including the correct platforms header file. Fixes the following W=1 kernel build warning(s): drivers/cpufreq/pasemi-cpufreq.c:109:5: warning: no previous prototype for ‘check_astate’ [-Wmissing-prototypes] 109 | int check_astate(void) | ^~~~~~~~~~~~ drivers/cpufreq/pasemi-cpufreq.c:114:6: warning: no previous prototype for ‘restore_astate’ [-Wmissing-prototypes] 114 | void restore_astate(int cpu) | ^~~~~~~~~~~~~~ Suggested-by: Olof Johansson <olof@lixom.net> Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-15cpufreq: cpufreq_governor: Demote store_sampling_rate() header to standard ↵Lee Jones1-1/+1
comment block There is no need for this to be denoted as kerneldoc. Fixes the following W=1 kernel build warning(s): drivers/cpufreq/cpufreq_governor.c:46: warning: Function parameter or member 'attr_set' not described in 'store_sampling_rate' drivers/cpufreq/cpufreq_governor.c:46: warning: Function parameter or member 'buf' not described in 'store_sampling_rate' drivers/cpufreq/cpufreq_governor.c:46: warning: Function parameter or member 'count' not described in 'store_sampling_rate' Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-15cpufreq: cpufreq: Demote lots of function headers unworthy of kerneldoc statusLee Jones1-15/+17
Also provide missing function parameter description for 'cpu' and 'policy'. Fixes the following W=1 kernel build warning(s): drivers/cpufreq/cpufreq.c:60: warning: cannot understand function prototype: 'struct cpufreq_driver *cpufreq_driver; ' drivers/cpufreq/cpufreq.c:90: warning: Function parameter or member 'cpufreq_policy_notifier_list' not described in 'BLOCKING_NOTIFIER_HEAD' drivers/cpufreq/cpufreq.c:312: warning: Function parameter or member 'val' not described in 'adjust_jiffies' drivers/cpufreq/cpufreq.c:312: warning: Function parameter or member 'ci' not described in 'adjust_jiffies' drivers/cpufreq/cpufreq.c:538: warning: Function parameter or member 'policy' not described in 'cpufreq_driver_resolve_freq' drivers/cpufreq/cpufreq.c:686: warning: Function parameter or member 'file_name' not described in 'show_one' drivers/cpufreq/cpufreq.c:686: warning: Function parameter or member 'object' not described in 'show_one' drivers/cpufreq/cpufreq.c:731: warning: Function parameter or member 'file_name' not described in 'store_one' drivers/cpufreq/cpufreq.c:731: warning: Function parameter or member 'object' not described in 'store_one' drivers/cpufreq/cpufreq.c:741: warning: Function parameter or member 'policy' not described in 'show_cpuinfo_cur_freq' drivers/cpufreq/cpufreq.c:741: warning: Function parameter or member 'buf' not described in 'show_cpuinfo_cur_freq' drivers/cpufreq/cpufreq.c:754: warning: Function parameter or member 'policy' not described in 'show_scaling_governor' drivers/cpufreq/cpufreq.c:754: warning: Function parameter or member 'buf' not described in 'show_scaling_governor' drivers/cpufreq/cpufreq.c:770: warning: Function parameter or member 'policy' not described in 'store_scaling_governor' drivers/cpufreq/cpufreq.c:770: warning: Function parameter or member 'buf' not described in 'store_scaling_governor' drivers/cpufreq/cpufreq.c:770: warning: Function parameter or member 'count' not described in 'store_scaling_governor' drivers/cpufreq/cpufreq.c:806: warning: Function parameter or member 'policy' not described in 'show_scaling_driver' drivers/cpufreq/cpufreq.c:806: warning: Function parameter or member 'buf' not described in 'show_scaling_driver' drivers/cpufreq/cpufreq.c:815: warning: Function parameter or member 'policy' not described in 'show_scaling_available_governors' drivers/cpufreq/cpufreq.c:815: warning: Function parameter or member 'buf' not described in 'show_scaling_available_governors' drivers/cpufreq/cpufreq.c:859: warning: Function parameter or member 'policy' not described in 'show_related_cpus' drivers/cpufreq/cpufreq.c:859: warning: Function parameter or member 'buf' not described in 'show_related_cpus' drivers/cpufreq/cpufreq.c:867: warning: Function parameter or member 'policy' not described in 'show_affected_cpus' drivers/cpufreq/cpufreq.c:867: warning: Function parameter or member 'buf' not described in 'show_affected_cpus' drivers/cpufreq/cpufreq.c:901: warning: Function parameter or member 'policy' not described in 'show_bios_limit' drivers/cpufreq/cpufreq.c:901: warning: Function parameter or member 'buf' not described in 'show_bios_limit' drivers/cpufreq/cpufreq.c:1625: warning: Function parameter or member 'dev' not described in 'cpufreq_remove_dev' drivers/cpufreq/cpufreq.c:1625: warning: Function parameter or member 'sif' not described in 'cpufreq_remove_dev' drivers/cpufreq/cpufreq.c:2380: warning: Function parameter or member 'cpu' not described in 'cpufreq_get_policy' drivers/cpufreq/cpufreq.c:2771: warning: Function parameter or member 'driver' not described in 'cpufreq_unregister_driver' Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-15cpufreq: freq_table: Demote obvious misuse of kerneldoc to standard comment ↵Lee Jones1-3/+3
blocks No attempt has been made to document any of the demoted functions here. Fixes the following W=1 kernel build warning(s): drivers/cpufreq/freq_table.c:229: warning: Function parameter or member 'policy' not described in 'show_available_freqs' drivers/cpufreq/freq_table.c:229: warning: Function parameter or member 'buf' not described in 'show_available_freqs' drivers/cpufreq/freq_table.c:229: warning: Function parameter or member 'show_boost' not described in 'show_available_freqs' drivers/cpufreq/freq_table.c:269: warning: Function parameter or member 'policy' not described in 'scaling_available_frequencies_show' drivers/cpufreq/freq_table.c:269: warning: Function parameter or member 'buf' not described in 'scaling_available_frequencies_show' drivers/cpufreq/freq_table.c:281: warning: Function parameter or member 'policy' not described in 'scaling_boost_frequencies_show' drivers/cpufreq/freq_table.c:281: warning: Function parameter or member 'buf' not described in 'scaling_boost_frequencies_show' Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-13cpufreq: intel_pstate: Fix active mode setting from command lineRafael J. Wysocki1-2/+6
If intel_pstate starts in the passive mode by default (that happens when the processor in the system doesn't support HWP), passing intel_pstate=active in the kernel command line doesn't work, so fix that. Fixes: 33aa46f252c7 ("cpufreq: intel_pstate: Use passive mode by default without HWP") Reported-by: Doug Smythies <dsmythies@telus.net> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Doug Smythies <dsmythies@telus.net>
2020-07-13cpufreq: Replace HTTP links with HTTPS onesAlexander A. Klimov2-2/+2
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-13cpufreq: intel_pstate: Fix static checker warning for epp variableSrinivas Pandruvada1-1/+1
Fix warning for: drivers/cpufreq/intel_pstate.c:731 store_energy_performance_preference() error: uninitialized symbol 'epp'. This warning is for a case, when energy_performance_preference attribute matches pre defined strings. In this case the value of raw epp will not be used to set EPP bits in MSR_HWP_REQUEST. So initializing with any value is fine. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-02cpufreq: Remove the weakly defined cpufreq_default_governor()Viresh Kumar1-7/+0
The default cpufreq governor is chosen with the help of a "choice" option in the Kconfig which will always end up selecting one of the governors and so the weakly defined definition of cpufreq_default_governor() will never get called. Moreover, this makes us skip the checking of the return value of that routine as it will always be non NULL. If the Kconfig option changes in future, then we will start getting a link error instead (and it won't go unnoticed as in the case of the weak definition). Suggested-by: Quentin Perret <qperret@google.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-02cpufreq: Specify default governor on command lineQuentin Perret1-9/+22
Currently, the only way to specify the default CPUfreq governor is via Kconfig options, which suits users who can build the kernel themselves perfectly. However, for those who use a distro-like kernel (such as Android, with the Generic Kernel Image project), the only way to use a non-default governor is to boot to userspace, and to then switch using the sysfs interface. Being able to specify the default governor on the command line, like is the case for cpuidle, would allow those users to specify their governor of choice earlier on, and to simplify the userspace boot procedure slighlty. To support this use-case, add a kernel command line parameter allowing the default governor for CPUfreq to be specified, which takes precedence over the built-in default. This implementation has one notable limitation: the default governor must be registered before the driver. This is solved for builtin governors and drivers using appropriate *_initcall() functions. And in the modular case, this must be reflected as a constraint on the module loading order. Signed-off-by: Quentin Perret <qperret@google.com> [ Viresh: Converted 'default_governor' to a string and parsing it only at initcall level, and several updates to cpufreq_init_policy(). ] Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> [ rjw: Changelog ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-02cpufreq: Register governors at core_initcallQuentin Perret5-77/+19
Currently, most CPUFreq governors are registered at the core_initcall time when the given governor is the default one, and the module_init time otherwise. In preparation for letting users specify the default governor on the kernel command line, change all of them to be registered at the core_initcall unconditionally, as it is already the case for the schedutil and performance governors. This will allow us to assume that builtin governors have been registered before the built-in CPUFreq drivers probe. And since all governors have similar init/exit patterns now, introduce two new macros, cpufreq_governor_{init,exit}(), to factorize the code. Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Quentin Perret <qperret@google.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> [ rjw: Changelog ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-02cpufreq: Fix locking issues with governorsViresh Kumar1-23/+35
The locking around governors handling isn't adequate currently. The list of governors should never be traversed without the locking in place. Also governor modules must not be removed while the code in them is still in use. Reported-by: Quentin Perret <qperret@google.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Cc: All applicable <stable@vger.kernel.org> [ rjw: Changelog ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-02cpufreq: intel_pstate: Allow raw energy performance preference valueSrinivas Pandruvada1-10/+40
Currently using attribute "energy_performance_preference", user space can write one of the four per-defined preference string. These preference strings gets mapped to a hard-coded Energy-Performance Preference (EPP) or Energy-Performance Bias (EPB) knob. These four values are supposed to cover broad spectrum of use cases, but are not uniformly distributed in the range. There are number of cases, where this is not enough. For example: Suppose user wants more performance when connected to AC. Instead of using default "balance performance", the "performance" setting can be used. This changes EPP value from 0x80 to 0x00. But setting EPP to 0, results in electrical and thermal issues on some platforms. This results in aggressive throttling, which causes a drop in performance. But some value between 0x80 and 0x00 results in better performance. But that value can't be fixed as the power curve is not linear. In some cases just changing EPP from 0x80 to 0x75 is enough to get significant performance gain. Similarly on battery the default "balance_performance" mode can be aggressive in power consumption. But picking up the next choice "balance power" results in too much loss of performance, which results in bad user experience in use cases like "Google Hangout". It was observed that some value between these two EPP is optimal. This change allows fine grain EPP tuning for platform like Chromebook or for users who wants to fine tune power and performance. Here based on the product and use cases, different EPP values can be set. This change is similar to the change done for: /sys/devices/system/cpu/cpu*/power/energy_perf_bias where user has choice to write a predefined string or raw value. The change itself is trivial. When user preference doesn't match predefined string preferences and value is an unsigned integer and in range, use that value for EPP. When the EPP feature is not present writing raw value is not supported. Suggested-by: Len Brown <lenb@kernel.org> Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-02cpufreq: intel_pstate: Allow enable/disable energy efficiencySrinivas Pandruvada1-24/+73
By default intel_pstate the driver disables energy efficiency by setting MSR_IA32_POWER_CTL bit 19 for Kaby Lake desktop CPU model in HWP mode. This CPU model is also shared by Coffee Lake desktop CPUs. This allows these systems to reach maximum possible frequency. But this adds power penalty, which some customers don't want. They want some way to enable/ disable dynamically. So, add an additional attribute "energy_efficiency" under /sys/devices/system/cpu/intel_pstate/ for these CPU models. This allows to read and write bit 19 ("Disable Energy Efficiency Optimization") in the MSR IA32_POWER_CTL. This attribute is present in both HWP and non-HWP mode as this has an effect in both modes. Refer to Intel Software Developer's manual for details. The scope of this bit is package wide. Also these systems are single package systems. So read/write MSR on the current CPU is enough. The energy efficiency (EE) bit setting needs to be preserved during suspend/resume and CPU offline/online operation. To do this: - Restoring the EE setting from the cpufreq resume() callback, if there is change from the system default. - By default, don't disable EE from cpufreq init() callback for matching CPU models. Since the scope is package wide and is a single package system, move the disable EE calls from init() callback to intel_pstate_init() function, which is called only once. Suggested-by: Len Brown <lenb@kernel.org> Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-01cpufreq: remove unicore32 driverMike Rapoport2-77/+0
The unicore32 port is removed from the kernel. There is no point to keep stale cpufreq driver for this architecture. Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Guenter Roeck <linux@roeck-us.net>
2020-06-30cpufreq: arm_scmi: Set fast_switch_possible conditionallyNicola Mazzucato1-1/+2
Currently the fast_switch_possible flag is set unconditionally to true. Based on this, schedutil does not create a thread for frequency switching and would always use the fast switch path. However, if the platform does not support SCMI fast channel, we use polling mode for SCMI message transfer. This may be possible only if there is dedicated channel for DVFS and all operations are in polling mode. Update this by retrieving the fast_switch capability based on the presence of fast channels in SCMI platform firmware. Link: https://lore.kernel.org/r/20200617094332.8391-2-nicola.mazzucato@arm.com Suggested-by: Lukasz Luba <lukasz.luba@arm.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Nicola Mazzucato <nicola.mazzucato@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>