summaryrefslogtreecommitdiff
path: root/drivers/cpufreq/qoriq-cpufreq.c
AgeCommit message (Collapse)AuthorFilesLines
2020-05-07cpufreq: qoriq: convert to a platform driverMian Yousaf Kaukab1-47/+29
The driver has to be manually loaded if it is built as a module. It is neither exporting MODULE_DEVICE_TABLE nor MODULE_ALIAS. Moreover, no platform-device is created (and thus no uevent is sent) for the clockgen nodes it depends on. Convert the module to a platform driver with its own alias. Moreover, drop whitelisted SOCs. Platform device will be created only for the compatible platforms. Reviewed-by: Yuantian Tang <andy.tang@nxp.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner1-4/+1
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-29cpufreq: qoriq: add support for lx2160aVabhav Sharma1-0/+1
Enable support of NXP SoC lx2160a to handle the lx2160a SoC. Signed-off-by: Tang Yuantian <andy.tang@nxp.com> Signed-off-by: Yogesh Gaur <yogeshnarayan.gaur@nxp.com> Signed-off-by: Vabhav Sharma <vabhav.sharma@nxp.com> Acked-by: Scott Wood <oss@buserror.net> Acked-by: Stephen Boyd <sboyd@kernel.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-04-25cpufreq: qoriq: Add ls1028a chip supportYuantian Tang1-0/+1
Enable cpufreq feature on ls1028a chip by adding its compatible string. Signed-off-by: Yuantian Tang <andy.tang@nxp.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-01-31cpufreq: qoriq: Use auto-registration of thermal cooling deviceAmit Kucheria1-13/+2
Use the CPUFREQ_IS_COOLING_DEV flag to allow cpufreq core to automatically register as a thermal cooling device. This allows removal of boiler plate code from the driver. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-03-20cpufreq: qoirq: Don't validate the frequency table twiceViresh Kumar1-11/+2
The cpufreq core is already validating the CPU frequency table after calling the ->init() callback of the cpufreq drivers and the drivers don't need to do the same anymore. Though they need to set the policy->freq_table field directly from the ->init() callback now. Stop validating the frequency table from qoirq driver. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-02-27cpufreq: qoriq: Drop memory allocation error messages from ↵Markus Elfring1-6/+2
qoriq_cpufreq_cpu_init() Omit extra messages for a memory allocation failure in this function. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-12-08cpu_cooling: Keep only one of_cpufreq*cooling_register() helperViresh Kumar1-1/+1
of_cpufreq_cooling_register() isn't used by anyone and so can be removed, but then we would be left with two routines: cpufreq_cooling_register() and of_cpufreq_power_cooling_register() that would look odd. Remove current implementation of of_cpufreq_cooling_register() and rename of_cpufreq_power_cooling_register() as of_cpufreq_cooling_register(). This simplifies lots of stuff. Acked-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-12-08cpu_cooling: Make of_cpufreq_power_cooling_register() parse DTViresh Kumar1-13/+1
All the callers of of_cpufreq_power_cooling_register() have almost identical code and it makes more sense to move that code into the helper as its all about reading DT properties. This got rid of lot of redundant code. Acked-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-05-28thermal: cpu_cooling: use cpufreq_policy to register cooling deviceViresh Kumar1-2/+1
The CPU cooling driver uses the cpufreq policy, to get clip_cpus, the frequency table, etc. Most of the callers of CPU cooling driver's registration routines have the cpufreq policy with them, but they only pass the policy->related_cpus cpumask. The __cpufreq_cooling_register() routine then gets the policy by itself and uses it. It would be much better if the callers can pass the policy instead directly. This also fixes a basic design flaw, where the policy can be freed while the CPU cooling driver is still active. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Lukasz Luba <lukasz.luba@arm.com> Tested-by: Lukasz Luba <lukasz.luba@arm.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2017-03-13cpufreq: qoriq: enhance bus frequency calculationYuanTian Tang1-7/+17
On some platforms, property device-type may be missed in soc node in dts which caused the bus-frequency can not be obtained correctly. This patch enhanced the bus-frequency calculation. When property device-type is missed in dts, bus-frequency will be obtained by looking up clock table to get platform clock and hence get its frequency. Signed-off-by: Tang Yuantian <andy.tang@nxp.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-02-24cpufreq: qoriq: clean up unused codeTang Yuantian1-4/+0
This snip code is not needed anymore since its user get_hard_smp_processor_id() has been removed. Signed-off-by: Tang Yuantian <yuantian.tang@nxp.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-02-09cpufreq: qoriq: Don't look at clock implementation detailsTang Yuantian1-99/+49
Get the CPU clock's potential parent clocks from the clock interface itself, rather than manually parsing the clocks property to find a phandle, looking at the clock-names property of that, and assuming that those are valid parent clocks for the cpu clock. This is necessary now that the clocks are generated based on the clock driver's knowledge of the chip rather than a fragile device-tree description of the mux options. We can now rely on the clock driver to ensure that the mux only exposes options that are valid. The cpufreq driver was currently being overly conservative in some cases -- for example, the "min_cpufreq = get_bus_freq()" restriction only applies to chips with erratum A-004510, and whether the freq_mask used on p5020 is needed depends on the actual frequencies of the PLLs (FWIW, p5040 has a similar limitation but its .freq_mask was zero) -- and the frequency mask mechanism made assumptions about particular parent clock indices that are no longer valid. Signed-off-by: Scott Wood <scottwood@nxp.com> Signed-off-by: Tang Yuantian <yuantian.tang@nxp.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-04-25cpufreq: qoriq: Fix cooling device registration issue during suspendJia Hongtao1-0/+1
Cooling device is registered by ready callback. It's also invoked while system resuming from sleep (Enabling non-boot cpus). Thus cooling device may be multiple registered. Matchable unregistration is added to exit callback to fix this issue. Signed-off-by: Jia Hongtao <hongtao.jia@nxp.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-04-25cpufreq: qoriq: Remove __exit macro from .exit callbackJia Hongtao1-2/+2
.exit callback (qoriq_cpufreq_cpu_exit()) is also used during suspend. So __exit macro should be removed or the function will be discarded. Signed-off-by: Jia Hongtao <hongtao.jia@nxp.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-04-25cpufreq: qoriq: Don't show cooling device messages if THERMAL_OF undefinedJia Hongtao1-2/+2
When THERMAL_OF is undefined the cooling device messages should not be shown. -ENOSYS is returned from of_cpufreq_cooling_register() when THERMAL_OF is undefined. Signed-off-by: Jia Hongtao <hongtao.jia@nxp.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-12-10cpufreq: qoriq: Register cooling device based on device treeHongtao Jia1-0/+24
Register the qoriq cpufreq driver as a cooling device, based on the thermal device tree framework. When temperature crosses the passive trip point cpufreq is used to throttle CPUs. Signed-off-by: Jia Hongtao <hongtao.jia@freescale.com> Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-06-15cpufreq: qoriq: optimize the CPU frequency switching timeTang Yuantian1-11/+21
Each time the CPU switches its frequency, the clock nodes in DTS are walked through to find proper clock source. This is very time-consuming, for example, it is up to 500+ us on T4240. Besides, switching time varies from clock to clock. To optimize this, each input clock of CPU is buffered, so that it can be picked up instantly when needed. Since for each CPU each input clock is stored in a pointer which takes 4 or 8 bytes memory and normally there are several input clocks per CPU, that will not take much memory as well. Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-04-11cpufreq: fix qoriq uniprocessor buildArnd Bergmann1-0/+2
The qoriq-cpufreq driver contains a hack for powerpc to include asm/smp.h on uniprocessor builds so it can get the hardware CPU number. On ARM, it does not require this hack, but instead gets a compile error: In file included from drivers/cpufreq/qoriq-cpufreq.c:24:0: arch/arm/include/asm/smp.h:18:3: error: #error "<asm/smp.h> included in non-SMP build" arch/arm/include/asm/smp.h:21:0: warning: "raw_smp_processor_id" redefined This adds an #ifdef to mirror the one in its get_cpu_physical_id() function. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 2f249358eedaf ("cpufreq: qoriq: rename the driver") Cc: Tang Yuantian <Yuantian.Tang@freescale.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-03-19cpufreq: qoriq: rename the driverTang Yuantian1-0/+372
This driver works on all QorIQ platforms which include ARM-based cores and PPC-based cores. Rename it in order to represent better. Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>