summaryrefslogtreecommitdiff
path: root/drivers/cpufreq/freq_table.c
AgeCommit message (Collapse)AuthorFilesLines
2015-08-07cpufreq: Allow drivers to enable boost support after registering driverViresh Kumar1-0/+15
In some cases it wouldn't be known at time of driver registration, if the driver needs to support boost frequencies. For example, while getting boost information from DT with opp-v2 bindings, we need to parse the bindings for all the CPUs to know if turbo/boost OPPs are supported or not. One way out to do that efficiently is to delay supporting boost mode (i.e. creating /sys/devices/system/cpu/cpufreq/boost file), until the time OPP bindings are parsed. At that point, the driver can enable boost support. This can be done at ->init(), where the frequency table is created. To do that, the driver requires few APIs from cpufreq core that let him do this. This patch provides these APIs. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-07-10cpufreq: Allow freq_table to be obtained for offline CPUsViresh Kumar1-9/+0
Users of freq table may want to access it for any CPU from policy->related_cpus mask. One such user is cpu-cooling layer. It gets a list of 'clip_cpus' (equivalent to policy->related_cpus) during registration and tries to get freq_table for the first CPU of this mask. If the CPU, for which it tries to fetch freq_table, is offline, cpufreq_frequency_get_table() fails. This happens because it relies on cpufreq_cpu_get_raw() for its functioning which returns policy only for online CPUs. The fix is to access the policy data structure for the given CPU directly (which also returns a valid policy for offline CPUs), but the policy itself has to be active (meaning that at least one CPU using it is online) for the frequency table to be returned. Because we will be using 'cpufreq_cpu_data' now, which is internal to the cpufreq core, move cpufreq_frequency_get_table() to cpufreq.c. Reported-and-tested-by: Pi-Cheng Chen <pi-cheng.chen@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-07-21cpufreq: Introduce new relation for freq selectionStratos Karafotis1-1/+11
Introduce CPUFREQ_RELATION_C for frequency selection. It selects the frequency with the minimum euclidean distance to target. In case of equal distance between 2 frequencies, it will select the greater frequency. Signed-off-by: Stratos Karafotis <stratosk@semaphore.gr> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-05-20cpufreq: Break out early when frequency equals target_freqStratos Karafotis1-2/+6
Many drivers keep frequencies in frequency table in ascending or descending order. When governor tries to change to policy->min or policy->max respectively then the cpufreq_frequency_table_target could return on first iteration. This will save some iteration cycles. So, break out early when a frequency in cpufreq_frequency_table equals to target one. Testing this during kernel compilation using ondemand governor with a frequency table in ascending order, the cpufreq_frequency_table_target returned early on the first iteration at about 30% of times called. Signed-off-by: Stratos Karafotis <stratosk@semaphore.gr> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-04-30cpufreq: Use cpufreq_for_each_* macros for frequency table iterationStratos Karafotis1-31/+25
The cpufreq core now supports the cpufreq_for_each_entry and cpufreq_for_each_valid_entry macros helpers for iteration over the cpufreq_frequency_table, so use them. It should have no functional changes. Signed-off-by: Stratos Karafotis <stratosk@semaphore.gr> Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-04-07cpufreq: create another field .flags in cpufreq_frequency_tableViresh Kumar1-2/+2
Currently cpufreq frequency table has two fields: frequency and driver_data. driver_data is only for drivers' internal use and cpufreq core shouldn't use it at all. But with the introduction of BOOST frequencies, this assumption was broken and we started using it as a flag instead. There are two problems due to this: - It is against the description of this field, as driver's data is used by the core now. - if drivers fill it with -3 for any frequency, then those frequencies are never considered by cpufreq core as it is exactly same as value of CPUFREQ_BOOST_FREQ, i.e. ~2. The best way to get this fixed is by creating another field flags which will be used for such flags. This patch does that. Along with that various drivers need modifications due to the change of struct cpufreq_frequency_table. Reviewed-by: Gautham R Shenoy <ego@linux.vnet.ibm.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-04-07cpufreq: don't print value of .driver_data from coreViresh Kumar1-4/+3
CPUFreq core doesn't control value of .driver_data and this field is completely driver specific. This can contain any value and not only indexes. For most of the drivers, which aren't using this field, its value is zero. So, printing this from core doesn't make any sense. Don't print it. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-03-12cpufreq: add 'freq_table' in struct cpufreq_policyViresh Kumar1-38/+8
freq table is not per CPU but per policy, so it makes more sense to keep it within struct cpufreq_policy instead of a per-cpu variable. This patch does it. Over that, there is no need to set policy->freq_table to NULL in ->exit(), as policy structure is going to be freed soon. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-01-17cpufreq: Add boost frequency support in coreLukasz Majewski1-7/+49
This commit adds boost frequency support in cpufreq core (Hardware & Software). Some SoCs (like Exynos4 - e.g. 4x12) allow setting frequency above its normal operation limits. Such mode shall be only used for a short time. Overclocking (boost) support is essentially provided by platform dependent cpufreq driver. This commit unifies support for SW and HW (Intel) overclocking solutions in the core cpufreq driver. Previously the "boost" sysfs attribute was defined in the ACPI processor driver code. By default boost is disabled. One global attribute is available at: /sys/devices/system/cpu/cpufreq/boost. It only shows up when cpufreq driver supports overclocking. Under the hood frequencies dedicated for boosting are marked with a special flag (CPUFREQ_BOOST_FREQ) at driver's frequency table. It is the user's concern to enable/disable overclocking with a proper call to sysfs. The cpufreq_boost_trigger_state() function is defined non static on purpose. It is used later with thermal subsystem to provide automatic enable/disable of the BOOST feature. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-01-06cpufreq: Make sure CPU is running on a freq from freq-tableViresh Kumar1-0/+22
Sometimes boot loaders set CPU frequency to a value outside of frequency table present with cpufreq core. In such cases CPU might be unstable if it has to run on that frequency for long duration of time and so its better to set it to a frequency which is specified in freq-table. This also makes cpufreq stats inconsistent as cpufreq-stats would fail to register because current frequency of CPU isn't found in freq-table. Because we don't want this change to affect boot process badly, we go for the next freq which is >= policy->cur ('cur' must be set by now, otherwise we will end up setting freq to lowest of the table as 'cur' is initialized to zero). In case current frequency doesn't match any frequency from freq-table, we throw warnings to user, so that user can get this fixed in their bootloaders or freq-tables. Reported-by: Carlos Hernandez <ceh@ti.com> Reported-and-tested-by: Nishanth Menon <nm@ti.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-10-16cpufreq: define generic .attr, .exit() and .verify() routinesViresh Kumar1-0/+20
Most of the CPUFreq drivers do similar things in .exit() and .verify() routines and .attr. So its better if we have generic routines for them which can be used by cpufreq drivers then. This patch introduces generic .attr, .exit() and .verify() cpufreq drivers. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-10-16cpufreq: add new routine cpufreq_verify_within_cpu_limits()Viresh Kumar1-4/+2
Most of the users of cpufreq_verify_within_limits() calls it for limiting with min/max from policy->cpuinfo. We can make that code simple by introducing another routine which will do this for them automatically. This patch adds another routine cpufreq_verify_within_cpu_limits() and updates others to use it. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Dirk Brandewie <dirk.j.brandewie@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-10-16cpufreq: Optimize cpufreq_frequency_table_verify()Viresh Kumar1-12/+13
cpufreq_frequency_table_verify() is rewritten here to make it more logical and efficient. - merge multiple lines for variable declarations together. - quit early if any frequency between min/max is found. - don't call cpufreq_verify_within_limits() in case any valid freq is found as it is of no use. - rename the count variable as found and change its type to boolean. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-09-30cpufreq: Add new helper cpufreq_table_validate_and_show()Viresh Kumar1-0/+12
Almost every cpufreq driver is required to validate its frequency table with: cpufreq_frequency_table_cpuinfo() and then expose it to cpufreq core with: cpufreq_frequency_table_get_attr(). This patch creates another helper routine cpufreq_table_validate_and_show() that will do both these steps in a single call and will return 0 for success, error otherwise. This also fixes potential bugs in cpufreq drivers where people have called cpufreq_frequency_table_get_attr() before calling cpufreq_frequency_table_cpuinfo(), as the later may fail. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-08-08cpufreq: Clean up header files included in the coreViresh Kumar1-3/+1
This patch addresses the following issues in the header files in the cpufreq core: - Include headers in ascending order, so that we don't add same many times by mistake. - <asm/> must be included after <linux/>, so that they override whatever they need to. - Remove unnecessary includes. - Don't include files already included by cpufreq.h or cpufreq_governor.h. [rjw: Changelog] Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-06-04cpufreq: rename index as driver_data in cpufreq_frequency_tableViresh Kumar1-13/+13
The "index" field of struct cpufreq_frequency_table was never an index and isn't used at all by the cpufreq core. It only is useful for cpufreq drivers for their internal purposes. Many people nowadays blindly set it in ascending order with the assumption that the core will use it, which is a mistake. Rename it to "driver_data" as that's what its purpose is. All of its users are updated accordingly. [rjw: Changelog] Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-02-09cpufreq: Don't check cpu_online(policy->cpu)Viresh Kumar1-6/+0
policy->cpu or cpus in policy->cpus can't be offline anymore. And so we don't need to check if they are online or not. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-02-02cpufreq: Simplify __cpufreq_remove_dev()Viresh Kumar1-0/+9
__cpufreq_remove_dev() is called on multiple occasions: cpufreq_driver unregister and cpu removals. Current implementation of this routine is overly complex without much need. If the cpu to be removed is the policy->cpu, we remove the policy first and add all other cpus again from policy->cpus and then finally call __cpufreq_remove_dev() again to remove the cpu to be deleted. Haahhhh.. There exist a simple solution to removal of a cpu: - Simply use the old policy structure - update its fields like: policy->cpu, etc. - notify any users of cpufreq, which depend on changing policy->cpu Hence this patch, which tries to implement the above theory. It is tested well by myself on ARM big.LITTLE TC2 SoC, which has 5 cores (2 A15 and 3 A7). Both A15's share same struct policy and all A7's share same policy structure. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-15cpufreq: Improve debug printsViresh Kumar1-0/+2
With debug options on, it is difficult to locate cpufreq core's debug prints. Fix this by prefixing debug prints with KBUILD_MODNAME. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2011-05-04[CPUFREQ] use dynamic debug instead of custom infrastructureDominik Brodowski1-11/+8
With dynamic debug having gained the capability to report debug messages also during the boot process, it offers a far superior interface for debug messages than the custom cpufreq infrastructure. As a first step, remove the old cpufreq_debug_printk() function and replace it with a call to the generic pr_debug() function. How can dynamic debug be used on cpufreq? You need a kernel which has CONFIG_DYNAMIC_DEBUG enabled. To enabled debugging during runtime, mount debugfs and $ echo -n 'module cpufreq +p' > /sys/kernel/debug/dynamic_debug/control for debugging the complete "cpufreq" module. To achieve the same goal during boot, append ddebug_query="module cpufreq +p" as a boot parameter to the kernel of your choice. For more detailled instructions, please see Documentation/dynamic-debug-howto.txt Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Dave Jones <davej@redhat.com>
2009-10-29percpu: make percpu symbols in cpufreq uniqueTejun Heo1-6/+6
This patch updates percpu related symbols in cpufreq such that percpu symbols are unique and don't clash with local symbols. This serves two purposes of decreasing the possibility of global percpu symbol collision and allowing dropping per_cpu__ prefix from percpu symbols. * drivers/cpufreq/cpufreq.c: s/policy_cpu/cpufreq_policy_cpu/ * drivers/cpufreq/freq_table.c: s/show_table/cpufreq_show_table/ * arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c: s/drv_data/acfreq_data/ s/old_perf/acfreq_old_perf/ Partly based on Rusty Russell's "alloc_percpu: rename percpu vars which cause name clashes" patch. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Rusty Russell <rusty@rustcorp.com.au>
2009-02-25[CPUFREQ] checkpatch cleanups for freq_tableDave Jones1-9/+9
Signed-off-by: Dave Jones <davej@redhat.com>
2008-07-22Merge branch 'next' of ↵Linus Torvalds1-6/+6
git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq: [CPUFREQ] cpufreq: remove CVS keywords [CPUFREQ] change cpu freq arrays to per_cpu variables
2008-05-23[CPUFREQ] clarify license of freq_table.cDominik Brodowski1-0/+5
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Dave Jones <davej@redhat.com>
2008-05-20[CPUFREQ] change cpu freq arrays to per_cpu variablesMike Travis1-6/+6
Change cpufreq_policy and cpufreq_governor pointer tables from arrays to per_cpu variables in the cpufreq subsystem. Also some minor complaints from checkpatch.pl fixed. Based on: git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86.git Signed-off-by: Mike Travis <travis@sgi.com> Signed-off-by: Dave Jones <davej@redhat.com>
2008-02-07[CPUFREQ] fix incorrect comment on show_available_freqs() in freq_table.cFenghua Yu1-1/+1
In freq_table.c, show_available_freqs()'s comment is oberviously wrong. Change the comment to a new one to avoid confusion. Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dave Jones <davej@redhat.com>
2007-07-12sysfs: kill unnecessary attribute->ownerTejun Heo1-1/+0
sysfs is now completely out of driver/module lifetime game. After deletion, a sysfs node doesn't access anything outside sysfs proper, so there's no reason to hold onto the attribute owners. Note that often the wrong modules were accounted for as owners leading to accessing removed modules. This patch kills now unnecessary attribute->owner. Note that with this change, userland holding a sysfs node does not prevent the backing module from being unloaded. For more info regarding lifetime rule cleanup, please read the following message. http://article.gmane.org/gmane.linux.kernel/510293 (tweaked by Greg to not delete the field just yet, to make it easier to merge things properly.) Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Cornelia Huck <cornelia.huck@de.ibm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-11-07[CPUFREQ] Fix coding style issues in cpufreq.Gautham R Shenoy1-10/+18
Clean up cpufreq subsystem to fix coding style issues and to improve the readability. Signed-off-by: Gautham R Shenoy <ego@in.ibm.com> Signed-off-by: Dave Jones <davej@redhat.com>
2006-05-31[CPUFREQ] Remove more freq_table reinitialisations.Dave Jones1-4/+8
Signed-off-by: Dave Jones <davej@redhat.com>
2006-05-31[CPUFREQ] Fix another redundant initialisation in freq_tableDave Jones1-1/+1
Signed-off-by: Dave Jones <davej@redhat.com>
2006-05-31[CPUFREQ] Remove duplicate assignment in freq_tableDave Jones1-1/+1
Signed-off-by: Dave Jones <davej@redhat.com>
2006-02-28[CPUFREQ] Lots of whitespace & CodingStyle cleanup.Dave Jones1-7/+5
Signed-off-by: Dave Jones <davej@redhat.com>
2005-04-17Linux-2.6.12-rc2v2.6.12-rc2Linus Torvalds1-0/+225
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!