summaryrefslogtreecommitdiff
path: root/drivers/cpufreq/cppc_cpufreq.c
AgeCommit message (Collapse)AuthorFilesLines
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 441Thomas Gleixner1-5/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation version 2 of the license extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 315 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Armijn Hemel <armijn@tjaldur.nl> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190531190115.503150771@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-18cpufreq / cppc: Work around for Hisilicon CPPC cpufreqXiongfeng Wang1-0/+65
Hisilicon chips do not support delivered performance counter register and reference performance counter register. But the platform can calculate the real performance using its own method. We reuse the desired performance register to store the real performance calculated by the platform. After the platform finished the frequency adjust, it gets the real performance and writes it into desired performance register. Os can use it to calculate the real frequency. Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com> [ rjw: Drop unnecessary braces ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-03cpufreq / CPPC: Mark acpi_ids as usedNathan Chancellor1-1/+1
Clang warns: drivers/cpufreq/cppc_cpufreq.c:431:36: warning: variable 'cppc_acpi_ids' is not needed and will not be emitted [-Wunneeded-internal-declaration] static const struct acpi_device_id cppc_acpi_ids[] = { ^ 1 warning generated. Mark the definition as used so that Clang understands we don't want this warning while not inhibiting Clang's dead code elimination from removing the unreferenced internal symbol when moving the data it contains to the globally available symbol via MODULE_DEVICE_TABLE. $ nm -S drivers/cpufreq/cppc_cpufreq.o | grep acpi | tail -1 0000000000000000 0000000000000040 R __mod_acpi__cppc_acpi_ids_device_table Suggested-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-07-18cpufreq / CPPC: Add cpuinfo_cur_freq support for CPPCGeorge Cherian1-0/+52
Per Section 8.4.7.1.3 of ACPI 6.2, the platform provides performance feedback via set of performance counters. To determine the actual performance level delivered over time, OSPM may read a set of performance counters from the Reference Performance Counter Register and the Delivered Performance Counter Register. OSPM calculates the delivered performance over a given time period by taking a beginning and ending snapshot of both the reference and delivered performance counters, and calculating: delivered_perf = reference_perf X (delta of delivered_perf counter / delta of reference_perf counter). Implement the above and hook this up to the cpufreq->get method. Signed-off-by: George Cherian <george.cherian@cavium.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Prashanth Prakash <pprakash@codeaurora.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-06-13treewide: kzalloc() -> kcalloc()Kees Cook1-1/+2
The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-04Merge branches 'acpi-cppc', 'acpi-misc', 'acpi-battery' and 'acpi-ac'Rafael J. Wysocki1-12/+68
* acpi-cppc: mailbox: PCC: erroneous error message when parsing ACPI PCCT ACPI / CPPC: Fix invalid PCC channel status errors ACPI / CPPC: Document CPPC sysfs interface cpufreq / CPPC: Support for CPPC v3 ACPI / CPPC: Check for valid PCC subspace only if PCC is used ACPI / CPPC: Add support for CPPC v3 * acpi-misc: ACPI: Add missing prototype_for arch_post_acpi_subsys_init() ACPI: add missing newline to printk * acpi-battery: ACPI / battery: Add quirk to avoid checking for PMIC with native driver ACPI / battery: Ignore AC state in handle_discharging on systems where it is broken ACPI / battery: Add handling for devices which wrongly report discharging state ACPI / battery: Remove initializer for unused ident dmi_system_id ACPI / AC: Remove initializer for unused ident dmi_system_id * acpi-ac: ACPI / AC: Add quirk to avoid checking for PMIC with native driver
2018-04-30cpufreq / CPPC: Set platform specific transition_delay_usPrashanth Prakash1-2/+44
Add support to specify platform specific transition_delay_us instead of using the transition delay derived from PCC. With commit 3d41386d556d (cpufreq: CPPC: Use transition_delay_us depending transition_latency) we are setting transition_delay_us directly and not applying the LATENCY_MULTIPLIER. Because of that, on Qualcomm Centriq we can end up with a very high rate of frequency change requests when using the schedutil governor (default rate_limit_us=10 compared to an earlier value of 10000). The PCC subspace describes the rate at which the platform can accept commands on the CPPC's PCC channel. This includes read and write command on the PCC channel that can be used for reasons other than frequency transitions. Moreover the same PCC subspace can be used by multiple freq domains and deriving transition_delay_us from it as we do now can be sub-optimal. Moreover if a platform does not use PCC for desired_perf register then there is no way to compute the transition latency or the delay_us. CPPC does not have a standard defined mechanism to get the transition rate or the latency at the moment. Given the above limitations, it is simpler to have a platform specific transition_delay_us and rely on PCC derived value only if a platform specific value is not available. Signed-off-by: Prashanth Prakash <pprakash@codeaurora.org> Cc: 4.14+ <stable@vger.kernel.org> # 4.14+ Fixes: 3d41386d556d (cpufreq: CPPC: Use transition_delay_us depending transition_latency) Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-04-24cpufreq / CPPC: Support for CPPC v3Prashanth Prakash1-12/+68
Use CPPC v3 entries to convert the abstract processor performance to processor frequency in KHz. Signed-off-by: Prashanth Prakash <pprakash@codeaurora.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-04-10cpufreq: CPPC: Initialize shared perf capabilities of CPUsShunyong Yang1-2/+12
When multiple CPUs are related in one cpufreq policy, the first online CPU will be chosen by default to handle cpufreq operations. Let's take cpu0 and cpu1 as an example. When cpu0 is offline, policy->cpu will be shifted to cpu1. cpu1's perf capabilities should be initialized. Otherwise, perf capabilities are 0s and speed change can not take effect. This patch copies perf capabilities of the first online CPU to other shared CPUs when policy shared type is CPUFREQ_SHARED_TYPE_ANY. Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Shunyong Yang <shunyong.yang@hxt-semitech.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-04-10cpufreq: CPPC: Don't set transition_latencyViresh Kumar1-1/+0
Now that the driver has started to set transition_delay_us directly, there is no need to set transition_latency along with it, as it is not used by the cpufreq core. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-03-30cpufreq: CPPC: Use transition_delay_us depending transition_latencyGeorge Cherian1-0/+3
With commit e948bc8fbee0 (cpufreq: Cap the default transition delay value to 10 ms) the cpufreq was not honouring the delay passed via ACPI (PCCT). Due to which on ARM based platforms using CPPC the cpufreq governor tries to change the frequency of CPUs faster than expected. This leads to continuous error messages like the following. " ACPI CPPC: PCC check channel failed. Status=0 " Earlier (without above commit) the default transition delay was taken form the value passed from PCCT. Use the same value provided by PCCT to set the transition_delay_us. Fixes: e948bc8fbee0 (cpufreq: Cap the default transition delay value to 10 ms) Signed-off-by: George Cherian <george.cherian@cavium.com> Cc: 4.14+ <stable@vger.kernel.org> # 4.14+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-03-20cpufreq: cppc_cpufreq: Fix cppc_cpufreq_init() failure pathChunyu Hu1-2/+7
Kmemleak reported the below leak. When cppc_cpufreq_init went into failure path, the cpu mask is not freed. After fix, this report is gone. And to avaoid potential NULL pointer reference, check the cpu value first. unreferenced object 0xffff800fd5ea4880 (size 128): comm "swapper/0", pid 1, jiffies 4294939510 (age 668.680s) hex dump (first 32 bytes): 00 00 00 00 20 00 00 00 00 00 00 00 00 00 00 00 .... ........... 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffff0000082c4ae4>] __kmalloc_node+0x278/0x634 [<ffff0000088f4a74>] alloc_cpumask_var_node+0x28/0x60 [<ffff0000088f4af0>] zalloc_cpumask_var+0x14/0x1c [<ffff000008d20254>] cppc_cpufreq_init+0xd0/0x19c [<ffff000008083828>] do_one_initcall+0xec/0x15c [<ffff000008cd1018>] kernel_init_freeable+0x1f4/0x2a4 [<ffff0000089099b0>] kernel_init+0x18/0x10c [<ffff000008084d50>] ret_from_fork+0x10/0x18 [<ffffffffffffffff>] 0xffffffffffffffff Signed-off-by: Chunyu Hu <chuhu@redhat.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-08-18cpufreq: remove setting of policy->cpu in policy->cpus during initSudeep Holla1-1/+0
policy->cpu is copied into policy->cpus in cpufreq_online() before calling into cpufreq_driver->init(). So there's no need to set the same in the individual driver init() functions again. This patch removes the redundant setting of policy->cpu in policy->cpus in intel_pstate and cppc drivers. Reported-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-06-27cpufreq / CPPC: Initialize policy->min to lowest nonlinear performancePrakash, Prashanth1-3/+16
Description of Lowest Perfomance in ACPI 6.1 specification states: "Lowest Performance is the absolute lowest performance level of the platform. Selecting a performance level lower than the lowest nonlinear performance level may actually cause an efficiency penalty, but should reduce the instantaneous power consumption of the processor. In traditional terms, this represents the T-state range of performance levels." Set the default value of policy->min to Lowest Nonlinear Performance to avoid any potential efficiency penalty. Signed-off-by: Prashanth Prakash <pprakash@codeaurora.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Alexey Klimov <alexey.klimov@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-10-21cpufreq / CPPC: Add MODULE_DEVICE_TABLE for cppc_cpufreq driverPrakash, Prashanth1-0/+7
MODULE_DEVICE_TABLE is added so that CPPC cpufreq module can be automatically loaded when we have a acpi processor device with "ACPI0007" hid. Signed-off-by: Prashanth Prakash <pprakash@codeaurora.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-10-14Merge tag 'pm-extra-4.9-rc1' of ↵Linus Torvalds1-1/+7
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more power management updates from Rafael Wysocki: "This includes a couple of fixes for cpufreq regressions introduced in 4.8, a rework of the intel_pstate algorithm used on Atom processors (that took some time to test) plus a fix and a couple of cleanups in that driver, a CPPC cpufreq driver fix, and a some devfreq fixes and cleanups (core and exynos-nocp). Specifics: - Fix two cpufreq regressions causing undesirable changes in behavior to appear (one in the core and one in the conservative governor) introduced during the 4.8 cycle (Aaro Koskinen, Rafael Wysocki). - Fix the way the intel_pstate driver accesses MSRs related to the hardware-managed P-states (HWP) feature during the initialization which currently is unsafe and may cause the processor to generate a general protection fault (Srinivas Pandruvada). - Rework the intel_pstate's P-state selection algorithm used on Atom processors to avoid known problems with the current one and to make the computation more straightforward, which also happens to improve performance in multiple benchmarks a bit (Rafael Wysocki). - Improve two comments in the intel_pstate driver (Rafael Wysocki). - Fix the desired performance computation in the CPPC cpufreq driver (Hoan Tran). - Fix the devfreq core to avoid printing misleading error messages in some cases (Tobias Jakobi). - Fix the error code path in devfreq_add_device() to use proper locking around list modifications (Axel Lin). - Fix a build failure and remove a couple of redundant updates of variables in the exynos-nocp devfreq driver (Axel Lin)" * tag 'pm-extra-4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: CPPC: Correct desired_perf calculation cpufreq: conservative: Fix next frequency selection cpufreq: skip invalid entries when searching the frequency cpufreq: intel_pstate: Fix struct pstate_adjust_policy kerneldoc cpufreq: intel_pstate: Proportional algorithm for Atom PM / devfreq: Skip status update on uninitialized previous_freq PM / devfreq: Add proper locking around list_del() PM / devfreq: exynos-nocp: Remove redundant code PM / devfreq: exynos-nocp: Select REGMAP_MMIO cpufreq: intel_pstate: Clarify comment in get_target_pstate_use_performance() cpufreq: intel_pstate: Fix unsafe HWP MSR access
2016-10-14cpufreq: CPPC: Correct desired_perf calculationHoan Tran1-1/+7
The desired_perf is an abstract performance number. Its value should be in the range of [lowest perf, highest perf] of CPPC. The correct calculation is desired_perf = freq * cppc_highest_perf / cppc_dmi_max_khz And cppc_cpufreq_set_target() returns if desired_perf is exactly the same with the old perf. Signed-off-by: Hoan Tran <hotran@apm.com> Reviewed-by: Prashanth Prakash <pprakash@codeaurora.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-10-03Merge tag 'acpi-4.9-rc1' of ↵Linus Torvalds1-7/+8
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI updates from Rafael Wysocki: "First off, the ACPICA code in the kernel is updated to upstream revision 20160831 that brings in a few bug fixes and cleanups. In particular, it is possible to mask GPEs now (and the sysfs interface for GPE control is fixed on top of that), problems related to the table loading mechanism are fixed and all code related to FADT version 2 (which has never been part of the ACPI specification) is dropped. On the new features front, there is a new watchdog driver based on the ACPI WDAT (ACPI Watchdog Action Table), needed on some platforms to replace the iTCO watchdog that doesn't work there, and some UART devices get new definitions of built-in properties (to be accessed via the generic device properties API). Also, included is a fix for an ACPI-related PCI resorces allocation issue and a few problems in the EC driver and in the button and battery drivers are fixed. In addition to that, the ACPI CPPC library is updated to make batching of requests sent over the PCC channel possible (which reduces the PCC usage overhead substantially in some cases) and to support functional fixed hardware (FFH) type of CPPC registers access (which will allow CPPC to be used on x86 too in the future). As usual, there are some assorted fixes and cleanups too. Specifics: - Update of the ACPICA code in the kernel to upstream revision 20160831 with the following major changes: * New mechanism for GPE masking. * Fixes for issues related to the LoadTable operator and table loading. * Fixes for issues related to so-called module-level code (MLC), that is AML that doesn't belong to any methods. * Change of the return value of the _OSI method to reflect the Windows behavior. * GAS (Generic Address Structure) support fix related to 32-bit FADT addresses. * Elimination of unnecessary FADT version 2 support. * ACPI tools fixes and cleanups. From Bob Moore, Lv Zheng, and Jung-uk Kim. - ACPI sysfs interface updates to fix GPE handling (on top of the new GPE masking mechanism in ACPICA) and issues related to table loading (Lv Zheng). - New watchdog driver based on the ACPI WDAT (ACPI Watchdog Action Table), needed on some platforms to replace the iTCO watchdog that doesn't work there and related updates of the intel_pmc_ipc, i2c/i801 and MFD/lcp_ich drivers (Mika Westerberg). - Driver core fix to prevent it from leaking secondary fwnode objects during device removal (Lukas Wunner). - New definitions of built-in properties for UART in ACPI-based x86 SoC drivers and a 8250_dw driver quirk for the APM X-Gene SoC (Heikki Krogerus). - New device ID for the Vulcan SPI controller and constification of local strucures in the AMD SoC (APD) ACPI driver (Kamlakant Patel, Julia Lawall). - Fix for a bug causing the allocation of PCI resorces to fail if ACPI-enumerated child platform devices are registered below the PCI devices in question (Mika Westerberg). - Change of the default polarity for PCI legacy IRQs to high on systems booting wth ACPI on platforms with a GIC interrupt controller model fixing the discrepancy between the specification and HW behavior (Lorenzo Pieralisi). - Fixes for the handling of system suspend/resume in the ACPI EC driver and update of that driver to make it cope with the cases when the EC device defined in the ECDT has to be used throughout the entire system life cycle (Lv Zheng). - Update of the ACPI CPPC library to allow it to batch requests sent over the PCC channel (to reduce overhead), to support the fixed functional hardware (FFH) CPPC registers access type, to notify the mailbox framework about TX completions when the interrupt flag is set for the PCC mailbox, and to support HW-Reduced Communication Subspace type 2 (Ashwin Chaugule, Prashanth Prakash, Srinivas Pandruvada, Hoan Tran). - ACPI button driver fix and documentation update related to the handling of laptop lids (Lv Zheng). - ACPI battery driver initialization fix (Carlos Garnacho). - ACPI GPIO enumeration documentation update (Mika Westerberg). - Assorted updates of the core ACPI bus type code (Lukas Wunner, Lv Zheng). - Assorted cleanups of the ACPI table parsing code and the x86-specific ACPI code (Al Stone). - Fixes for assorted ACPI-related issues found in linux-next (Wei Yongjun)" * tag 'acpi-4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (98 commits) ACPI / documentation: Use recommended name in GPIO property names watchdog: wdat_wdt: Fix warning for using 0 as NULL watchdog: wdat_wdt: fix return value check in wdat_wdt_probe() platform/x86: intel_pmc_ipc: Do not create iTCO watchdog when WDAT table exists i2c: i801: Do not create iTCO watchdog when WDAT table exists mfd: lpc_ich: Do not create iTCO watchdog when WDAT table exists ACPI / bus: Adjust ACPI subsystem initialization for new table loading mode ACPICA: Parser: Fix a regression in LoadTable support ACPICA: Tables: Fix "UNLOAD" code path lock issues ACPI / watchdog: Add support for WDAT hardware watchdog ACPI / platform: Pay attention to parent device's resources PCI: Add pci_find_resource() ACPI / CPPC: Support PCC with interrupt flag ACPI / sysfs: Update sysfs signature handling code ACPI / sysfs: Fix an issue for LoadTable opcode ACPICA: Tables: Fix a regression in acpi_tb_find_table() ACPI / tables: Remove duplicated include from tables.c ACPI / APD: constify local structures x86: ACPI: make variable names clearer in acpi_parse_madt_lapic_entries() x86: ACPI: remove extraneous white space after semicolon ...
2016-09-17cpufreq: CPPC: Avoid overflow when calculating desired_perfHoan Tran1-1/+1
This patch fixes overflow issue when calculating the desired_perf. Fixes: ad38677df44b (cpufreq: CPPC: Force reporting values in KHz to fix user space interface) Signed-off-by: Hoan Tran <hotran@apm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-09-13cpufreq: CPPC: Force reporting values in KHz to fix user space interfaceAl Stone1-4/+49
When CPPC is being used by ACPI on arm64, user space tools such as cpupower report CPU frequency values from sysfs that are incorrect. What the driver was doing was reporting the values given by ACPI tables in whatever scale was used to provide them. However, the ACPI spec defines the CPPC values as unitless abstract numbers. Internal kernel structures such as struct perf_cap, in contrast, expect these values to be in KHz. When these struct values get reported via sysfs, the user space tools also assume they are in KHz, causing them to report incorrect values (for example, reporting a CPU frequency of 1MHz when it should be 1.8GHz). The downside is that this approach has some assumptions: (1) It relies on SMBIOS3 being used, *and* that the Max Frequency value for a processor is set to a non-zero value. (2) It assumes that all processors run at the same speed, or that the CPPC values have all been scaled to reflect relative speed. This patch retrieves the largest CPU Max Frequency from a type 4 DMI record that it can find. This may not be an issue, however, as a sampling of DMI data on x86 and arm64 indicates there is often only one such record regardless. Since CPPC is relatively new, it is unclear if the ACPI ASL will always be written to reflect any sort of relative performance of processors of differing speeds. (3) It assumes that performance and frequency both scale linearly. For arm64 servers, this may be sufficient, but it does rely on firmware values being set correctly. Hence, other approaches will be considered in the future. This has been tested on three arm64 servers, with and without DMI, with and without CPPC support. Signed-off-by: Al Stone <ahs3@redhat.com> Signed-off-by: Prashanth Prakash <pprakash@codeaurora.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-09-09ACPI / CPPC: Add prefix cppc to cpudata structure nameSrinivas Pandruvada1-7/+7
Since struct cpudata is defined in a header file, add prefix cppc_ to make it not a generic name. Otherwise it causes compile issue in locally define structure with the same name. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-08-31ACPI / CPPC: set a non-zero value for transition_latencyPrakash, Prashanth1-0/+1
Compute the expected transition latency for frequency transitions using the values from the PCCT tables when the desired perf register is in PCC. Signed-off-by: Prashanth Prakash <pprakash@codeaurora.org> Reviewed-by: Alexey Klimov <alexey.klimov@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-04-25cpufreq: ACPI / CPPC: Add module support for cppc_cpufreq driverAshwin Chaugule1-0/+21
Add a function to cleanup at module exit and export appropriate GPL string to enable moduler support for the cppc_cpufreq driver. Reported-by: Srinivas Pandruvada <srinivas.pandruvada@intel.com> Signed-off-by: Ashwin Chaugule <ashwin.chaugule@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-11-24cpufreq: CPPC: Initialize and check CPUFreq CPU co-ord type correctlyAshwin Chaugule1-1/+2
The CPU policy struct indicates the co-ordination type for all CPUs of a common freq domain. Initialize it correctly using the CPU specific data gathered from CPPC ACPI lib via acpi_get_psd_map(). The PSD object is optional, so the cpu->shared_type can also be 0. So instead of assuming any value other than SW_ANY(0xFD) is unsupported, explictly check if shared_type is SW_ALL and then bail. Signed-off-by: Ashwin Chaugule <ashwin.chaugule@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-11-07cpufreq: CPPC: Delete an unnecessary check before the function call kfree()Markus Elfring1-2/+1
The kfree() function tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-10-13ACPI / CPPC: Add a CPUFreq driver for use with CPPCAshwin Chaugule1-0/+176
This driver utilizes the methods introduced in a previous patch titled - "ACPI: Introduce CPU performance controls using CPPC" and enables usage with existing CPUFreq governors. Signed-off-by: Ashwin Chaugule <ashwin.chaugule@linaro.org> Reviewed-by: Al Stone <al.stone@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>