summaryrefslogtreecommitdiff
path: root/drivers/clocksource
AgeCommit message (Collapse)AuthorFilesLines
2020-05-23Merge branch 'timers/drivers/timer-ti' into timers/drivers/nextDaniel Lezcano3-6/+20
2020-05-23clocksource/drivers/timer-ti-dm: Fix warning for set but not usedTony Lindgren1-4/+0
We can get a warning for dmtimer_clocksource_init() with 'pa' set but not used. This was used in the earlier revisions of the code but no longer needed, so let's remove the unused pa and of_translate_address(). Let's also do it for dmtimer_clockevent_init() that has a similar issue. Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200519155157.12804-1-tony@atomide.com
2020-05-23clocksource/drivers/timer-ti-dm: Add clockevent and clocksource supportTony Lindgren2-0/+732
We can move the TI dmtimer clockevent and clocksource to live under drivers/clocksource if we rely only on the clock framework, and handle the module configuration directly in the clocksource driver based on the device tree data. This removes the early dependency with system timers to the interconnect related code, and we can probe pretty much everything else later on at the module_init level. Let's first add a new driver for timer-ti-dm-systimer based on existing arch/arm/mach-omap2/timer.c. Then let's start moving SoCs to probe with device tree data while still keeping the old timer.c. And eventually we can just drop the old timer.c. Let's take the opportunity to switch to use readl/writel as pointed out by Daniel Lezcano <daniel.lezcano@linaro.org>. This allows further clean-up of the timer-ti-dm code the a lot of the shared helpers can just become static to the non-syster related code. Note the boards can optionally configure different timer source clocks if needed with assigned-clocks and assigned-clock-parents. Cc: linux-kernel@vger.kernel.org Cc: linux-omap@vger.kernel.org Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Keerthy <j-keerthy@ti.com> Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Rob Herring <robh@kernel.org> Cc: Tero Kristo <t-kristo@ti.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200507172330.18679-3-tony@atomide.com
2020-05-23clocksource/drivers/timer-ti-32k: Add support for initializing directlyTony Lindgren1-1/+47
Let's allow probing the 32k counter directly based on devicetree data to prepare for dropping the related legacy platform code. Let's only do this if the parent node is compatible with ti-sysc to make sure we have the related devicetree data available. Let's also show the 32k counter information before registering the clocksource, now we see it after the clocksource information which is a bit confusing. Cc: linux-kernel@vger.kernel.org Cc: linux-omap@vger.kernel.org Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Keerthy <j-keerthy@ti.com> Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Rob Herring <robh@kernel.org> Cc: Tero Kristo <t-kristo@ti.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200507172330.18679-2-tony@atomide.com
2020-05-23drivers/clocksource/arm_arch_timer: Remove duplicate error messageDejin Zheng1-3/+1
The function acpi_gtdt_init() prints a message in case of error. Remove the error message after testing if the function fails, otherwise it is a duplicate message. Signed-off-by: Dejin Zheng <zhengdejin5@gmail.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200429153559.21189-1-zhengdejin5@gmail.com
2020-05-23clocksource/drivers/arc_timer: Remove duplicate error messageDejin Zheng1-3/+1
The function arc_get_timer_clk() prints an error message if it fails, remove the second error message if the function fails. Signed-off-by: Dejin Zheng <zhengdejin5@gmail.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200429151223.3120-1-zhengdejin5@gmail.com
2020-05-23clocksource/drivers/rda: drop redundant Kconfig dependencyJohan Hovold1-1/+0
Since commit 2f8a26c166eb ("clocksource: Improve GENERIC_CLOCKEVENTS dependency") all clocksource drivers depend on GENERIC_CLOCKEVENTS so drop the redundant attribute from the RDA-timer entry which was added later. Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200513122548.16974-1-johan@kernel.org
2020-05-19clocksource/drivers/timer-ti-dm: Fix warning for set but not usedTony Lindgren1-4/+0
We can get a warning for dmtimer_clocksource_init() with 'pa' set but not used. This was used in the earlier revisions of the code but no longer needed, so let's remove the unused pa and of_translate_address(). Let's also do it for dmtimer_clockevent_init() that has a similar issue. Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200519155157.12804-1-tony@atomide.com
2020-05-18clocksource/drivers/timer-ti-dm: Add clockevent and clocksource supportTony Lindgren2-0/+732
We can move the TI dmtimer clockevent and clocksource to live under drivers/clocksource if we rely only on the clock framework, and handle the module configuration directly in the clocksource driver based on the device tree data. This removes the early dependency with system timers to the interconnect related code, and we can probe pretty much everything else later on at the module_init level. Let's first add a new driver for timer-ti-dm-systimer based on existing arch/arm/mach-omap2/timer.c. Then let's start moving SoCs to probe with device tree data while still keeping the old timer.c. And eventually we can just drop the old timer.c. Let's take the opportunity to switch to use readl/writel as pointed out by Daniel Lezcano <daniel.lezcano@linaro.org>. This allows further clean-up of the timer-ti-dm code the a lot of the shared helpers can just become static to the non-syster related code. Note the boards can optionally configure different timer source clocks if needed with assigned-clocks and assigned-clock-parents. Cc: linux-kernel@vger.kernel.org Cc: linux-omap@vger.kernel.org Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Keerthy <j-keerthy@ti.com> Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Rob Herring <robh@kernel.org> Cc: Tero Kristo <t-kristo@ti.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200507172330.18679-3-tony@atomide.com
2020-05-18clocksource/drivers/timer-ti-32k: Add support for initializing directlyTony Lindgren1-1/+47
Let's allow probing the 32k counter directly based on devicetree data to prepare for dropping the related legacy platform code. Let's only do this if the parent node is compatible with ti-sysc to make sure we have the related devicetree data available. Let's also show the 32k counter information before registering the clocksource, now we see it after the clocksource information which is a bit confusing. Cc: linux-kernel@vger.kernel.org Cc: linux-omap@vger.kernel.org Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Keerthy <j-keerthy@ti.com> Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Rob Herring <robh@kernel.org> Cc: Tero Kristo <t-kristo@ti.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200507172330.18679-2-tony@atomide.com
2020-04-27clocksource/drivers/versatile: Allow CONFIG_CLKSRC_VERSATILE to be disabledRob Herring1-3/+2
The timer-versatile driver provides a sched_clock for certain Arm Ltd. reference platforms. Specifically, it is used on Versatile and 32-bit VExpress. It is not needed for those platforms with an arch timer (all the 64-bit ones) yet CONFIG_MFD_VEXPRESS_SYSREG does still need to be enabled. In that case, the timer-versatile can only be disabled when COMPILE_TEST is enabled which is not desirable. Let's use the sub-arch kconfig symbols instead. Realview platforms don't have the sysregs that this driver uses so correct the help text. Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200417212045.16917-1-robh@kernel.org
2020-04-27clocksource/drivers/timer-microchip-pit64b: Select CONFIG_TIMER_OFMichael Ellerman1-0/+1
This driver is an OF driver, it depends on OF, and uses TIMER_OF_DECLARE, so it should select CONFIG_TIMER_OF. Without CONFIG_TIMER_OF enabled this can lead to warnings such as: powerpc-linux-ld: warning: orphan section `__timer_of_table' from `drivers/clocksource/timer-microchip-pit64b.o' being placed in section `__timer_of_table'. Because TIMER_OF_TABLES in vmlinux.lds.h doesn't emit anything into the linker script when CONFIG_TIMER_OF is not enabled. Fixes: 625022a5f160 ("clocksource/drivers/timer-microchip-pit64b: Add Microchip PIT64B support") Cc: stable@vger.kernel.org # v5.6+ Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200426124356.3929682-1-mpe@ellerman.id.au
2020-04-15clocksource/drivers/atmel-st: Remove useless 'status'Jason Yan1-2/+1
Fix the following coccicheck warning: drivers/clocksource/timer-atmel-st.c:142:6-12: Unneeded variable: "status". Return "0" on line 166 Signed-off-by: Jason Yan <yanaijie@huawei.com> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200414120238.35704-1-yanaijie@huawei.com
2020-04-09clocksource/drivers/imx-tpm: Add support for ARM64Anson Huang1-2/+6
Allows building and compile-testing the i.MX TPM driver also for ARM64. The delay_timer is only supported on ARMv7. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/1585715222-24489-1-git-send-email-Anson.Huang@nxp.com
2020-04-09clocksource: davinci: axe a pointless __GFP_NOFAILChristophe JAILLET1-1/+1
There is no need to specify __GFP_NOFAIL when allocating memory here, so axe it. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200409101226.15432-1-christophe.jaillet@wanadoo.fr
2020-04-09clocksource/drivers/davinci: Avoid trailing '\n' hidden in pr_fmt()Christophe JAILLET1-12/+10
pr_xxx() functions usually have '\n' at the end of the logging message. Here, this '\n' is added via the 'pr_fmt' macro. In order to be more consistent with other files, use a more standard convention and put these '\n' back in the messages themselves and remove it from the pr_fmt macro. While at it, remove a useless message in case of 'kzalloc' failure, especially with a __GFP_NOFAIL flag. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200409092543.14727-1-christophe.jaillet@wanadoo.fr
2020-04-05clocksource/drivers/timer-vf-pit: Add missing parenthesisafzal mohammed1-1/+1
Recently all usage of setup_irq() was replaced by request_irq(). The replacement in timer-vf-pit.c missed closing parentheses resulting in a build error (vf610m4_defconfig). Fix it. Fixes: cc2550b421aa ("clocksource: Replace setup_irq() by request_irq()") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: afzal mohammed <afzal.mohd.ma@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20200323061130.GA6286@afzalpc
2020-03-31Merge tag 'arm64-upstream' of ↵Linus Torvalds1-3/+15
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 updates from Catalin Marinas: "The bulk is in-kernel pointer authentication, activity monitors and lots of asm symbol annotations. I also queued the sys_mremap() patch commenting the asymmetry in the address untagging. Summary: - In-kernel Pointer Authentication support (previously only offered to user space). - ARM Activity Monitors (AMU) extension support allowing better CPU utilisation numbers for the scheduler (frequency invariance). - Memory hot-remove support for arm64. - Lots of asm annotations (SYM_*) in preparation for the in-kernel Branch Target Identification (BTI) support. - arm64 perf updates: ARMv8.5-PMU 64-bit counters, refactoring the PMU init callbacks, support for new DT compatibles. - IPv6 header checksum optimisation. - Fixes: SDEI (software delegated exception interface) double-lock on hibernate with shared events. - Minor clean-ups and refactoring: cpu_ops accessor, cpu_do_switch_mm() converted to C, cpufeature finalisation helper. - sys_mremap() comment explaining the asymmetric address untagging behaviour" * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (81 commits) mm/mremap: Add comment explaining the untagging behaviour of mremap() arm64: head: Convert install_el2_stub to SYM_INNER_LABEL arm64: Introduce get_cpu_ops() helper function arm64: Rename cpu_read_ops() to init_cpu_ops() arm64: Declare ACPI parking protocol CPU operation if needed arm64: move kimage_vaddr to .rodata arm64: use mov_q instead of literal ldr arm64: Kconfig: verify binutils support for ARM64_PTR_AUTH lkdtm: arm64: test kernel pointer authentication arm64: compile the kernel with ptrauth return address signing kconfig: Add support for 'as-option' arm64: suspend: restore the kernel ptrauth keys arm64: __show_regs: strip PAC from lr in printk arm64: unwind: strip PAC from kernel addresses arm64: mask PAC bits of __builtin_return_address arm64: initialize ptrauth keys for kernel booting task arm64: initialize and switch ptrauth kernel keys arm64: enable ptrauth earlier arm64: cpufeature: handle conflicts based on capability arm64: cpufeature: Move cpu capability helpers inside C file ...
2020-03-31Merge tag 'timers-core-2020-03-30' of ↵Linus Torvalds35-329/+476
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timekeeping and timer updates from Thomas Gleixner: "Core: - Consolidation of the vDSO build infrastructure to address the difficulties of cross-builds for ARM64 compat vDSO libraries by restricting the exposure of header content to the vDSO build. This is achieved by splitting out header content into separate headers. which contain only the minimaly required information which is necessary to build the vDSO. These new headers are included from the kernel headers and the vDSO specific files. - Enhancements to the generic vDSO library allowing more fine grained control over the compiled in code, further reducing architecture specific storage and preparing for adopting the generic library by PPC. - Cleanup and consolidation of the exit related code in posix CPU timers. - Small cleanups and enhancements here and there Drivers: - The obligatory new drivers: Ingenic JZ47xx and X1000 TCU support - Correct the clock rate of PIT64b global clock - setup_irq() cleanup - Preparation for PWM and suspend support for the TI DM timer - Expand the fttmr010 driver to support ast2600 systems - The usual small fixes, enhancements and cleanups all over the place" * tag 'timers-core-2020-03-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (80 commits) Revert "clocksource/drivers/timer-probe: Avoid creating dead devices" vdso: Fix clocksource.h macro detection um: Fix header inclusion arm64: vdso32: Enable Clang Compilation lib/vdso: Enable common headers arm: vdso: Enable arm to use common headers x86/vdso: Enable x86 to use common headers mips: vdso: Enable mips to use common headers arm64: vdso32: Include common headers in the vdso library arm64: vdso: Include common headers in the vdso library arm64: Introduce asm/vdso/processor.h arm64: vdso32: Code clean up linux/elfnote.h: Replace elf.h with UAPI equivalent scripts: Fix the inclusion order in modpost common: Introduce processor.h linux/ktime.h: Extract common header for vDSO linux/jiffies.h: Extract common header for vDSO linux/time64.h: Extract common header for vDSO linux/time32.h: Extract common header for vDSO linux/time.h: Extract common header for vDSO ...
2020-03-28Revert "clocksource/drivers/timer-probe: Avoid creating dead devices"Thomas Gleixner1-2/+0
This reverts commit 4f41fe386a94639cd9a1831298d4f85db5662f1e. The change breaks systems on which the DT node of a device is used by multiple drivers. The proposed workaround to clear OF_POPULATED is just a band aid and this needs to be cleaned up at the root of the problem. Revert this for now. Reported-by: Ionela Voinescu <ionela.voinescu@arm.com> Reported-by: Jon Hunter <jonathanh@nvidia.com> Requested-by: Rob Herring <robh+dt@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Saravana Kannan <saravanak@google.com> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200324175955.GA16972@arm.com
2020-03-27clocksource/drivers/hyper-v: Make sched clock return nanoseconds correctlyYubo Xie1-2/+4
The sched clock read functions return the HV clock (100ns granularity) without converting it to nanoseconds. Add the missing conversion. Fixes: bd00cd52d5be ("clocksource/drivers/hyperv: Add Hyper-V specific sched clock function") Signed-off-by: Yubo Xie <yuboxie@microsoft.com> Signed-off-by: Tianyu Lan <Tianyu.Lan@microsoft.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20200327021159.31429-1-Tianyu.Lan@microsoft.com
2020-03-19Merge tag 'timers-v5.7' of ↵Thomas Gleixner33-321/+459
https://git.linaro.org/people/daniel.lezcano/linux into timers/core Pull clockevent/clocksource updates from Daniel Lezcano: - Avoid creating dead devices by flagging the driver with OF_POPULATED in order to prevent the platform to create another device (Saravana Kannan) - Remove unused includes from imx family drivers (Anson Huang) - timer-dm-ti rework to prepare for pwm and suspend support (Lokesh Vutla) - Fix the rate for the global clock on the pit64b (Claudiu Beznea) - Fix timer-cs5535 by requesting an irq with non-NULL dev_id (Afzal Mohammed) - Replace setup_irq() by request_irq() (Afzal Mohammed) - Add support for the TCU of X1000 (Zhou Yanjie) - Drop the bogus omap_dm_timer_of_set_source() function (Suman Anna) - Do not update the counter when updating the period in order to prevent a disruption when the pwm is used (Lokesh Vutla) - Improve owl_timer_init() failure messages (Matheus Castello) - Add driver for the Ingenic JZ47xx OST (Maarten ter Huurne) - Pass the interrupt and the shutdown callbacks in the init function for ast2600 support (Joel Stanley) - Add the ast2600 compatible string for the fttmr010 (Joel Stanley)
2020-03-17clocksource/drivers/timer-probe: Avoid creating dead devicesSaravana Kannan1-0/+2
Timer initialization is done during early boot way before the driver core starts processing devices and drivers. Timers initialized during this early boot period don't really need or use a struct device. However, for timers represented as device tree nodes, the struct devices are still created and sit around unused and wasting memory. This change avoid this by marking the device tree nodes as "populated" if the corresponding timer is successfully initialized. Signed-off-by: Saravana Kannan <saravanak@google.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200111052125.238212-1-saravanak@google.com
2020-03-17clocksource/drivers/imx-sysctr: Remove unused includesAnson Huang1-2/+0
There is nothing in use from of_address.h/of_irq.h, remove them. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/1584413713-7376-1-git-send-email-Anson.Huang@nxp.com
2020-03-17clocksource/drivers/imx-tpm: Remove unused includesAnson Huang1-2/+0
There is nothing in use from of_address.h/of_irq.h, remove them. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/1584412549-18354-1-git-send-email-Anson.Huang@nxp.com
2020-03-16Merge branch 'timers/drivers/timer-ti-dm' into timers/drivers/nextDaniel Lezcano1-74/+109
2020-03-16clocksource/drivers/timer-ti-dm: Enable autoreload in set_pwmLokesh Vutla1-11/+5
dm timer ops set_load() api allows to configure the load value and to set the auto reload feature. But auto reload feature is independent of load value and should be part of configuring pwm. This way pwm can be disabled by disabling auto reload feature using set_pwm() so that the current pwm cycle will be completed. Else pwm disabling causes the cycle to be stopped abruptly. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200305082715.15861-7-lokeshvutla@ti.com
2020-03-16clocksource/drivers/timer-ti-dm: Add support to get pwm current statusLokesh Vutla1-0/+15
omap_dm_timer_ops provide support to configure the pwm but there is no support to get the current status. For configuring pwm it is advised to check the current hw status instead of relying on pwm framework. So implement a new timer ops to get the current status of pwm. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Acked-by: Tony Lindgen <tony@atomide.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200305082715.15861-6-lokeshvutla@ti.com
2020-03-16clocksource/drivers/timer-ti-dm: Do not update counter on updating the periodLokesh Vutla1-1/+0
Write to trigger register(OMAP_TIMER_TRIGGER_REG) will load the value in Load register(OMAP_TIMER_LOAD_REG) into Counter register (OMAP_TIMER_COUNTER_REG). omap_dm_timer_set_load() writes into trigger register every time load register is updated. When timer is configured in pwm mode, this causes disruption in current pwm cycle, which is not expected especially when pwm is used as PPS signal for synchronized PTP clocks. So do not write into trigger register on updating the period. Tested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200305082715.15861-5-lokeshvutla@ti.com
2020-03-16clocksource/drivers/timer-ti-dm: Implement cpu_pm notifier for context save ↵Lokesh Vutla1-40/+57
and restore omap_dm_timer_enable() restores the entire context(including counter) based on 2 conditions: - If get_context_loss_count is populated and context is lost. - If get_context_loss_count is not populated update unconditionally. Case2 has a side effect of updating the counter register even though context is not lost. When timer is configured in pwm mode, this is causing undesired behaviour in the pwm period. Instead of using get_context_loss_count call back, implement cpu_pm notifier with context save and restore support. And delete the get_context_loss_count callback all together. Suggested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> [tony@atomide.com: removed pm_runtime calls from cpuidle calls] Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200316111453.15441-1-lokeshvutla@ti.com
2020-03-16clocksource/drivers/timer-ti-dm: Prepare for using cpuidleTony Lindgren1-5/+31
Let's add runtime_suspend and resume functions and atomic enabled flag. This way we can use these when converting to use cpuidle for saving and restoring device context. And we need to maintain the driver state in the driver as documented in "9. Autosuspend, or automatically-delayed suspends" in the Documentation/power/runtime_pm.rst document related to using driver private lock and races with runtime_suspend(). Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200305082715.15861-3-lokeshvutla@ti.com
2020-03-16clocksource/drivers/timer-ti-dm: Convert to SPDX identifierLokesh Vutla1-18/+1
Use SPDX-License-Identifier instead of a verbose license text. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200305082715.15861-2-lokeshvutla@ti.com
2020-03-16clocksource/drivers/timer-microchip-pit64b: Fix rate for gckClaudiu Beznea1-0/+1
Generic clock rate needs to be set in case it was selected as timer clock source in mchp_pit64b_init_mode(). Otherwise it will be enabled with wrong rate. Fixes: 625022a5f160 ("clocksource/drivers/timer-microchip-pit64b: Add Microchip PIT64B support") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/1584352376-32585-1-git-send-email-claudiu.beznea@microchip.com
2020-03-12clocksource/drivers/timer-cs5535: Request irq with non-NULL dev_idafzal mohammed1-3/+2
Recently all usages of setup_irq() was replaced by request_irq(). request_irq() does a few sanity checks that were not done in setup_irq(), if they fail irq registration will fail. One of the check is to ensure that non-NULL dev_id is passed in the case of shared irq. Fix it by passing non-NULL dev_id while registering the shared irq. Fixes: cc2550b421aa ("clocksource: Replace setup_irq() by request_irq()") Signed-off-by: afzal mohammed <afzal.mohd.ma@gmail.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200312064817.19000-1-afzal.mohd.ma@gmail.com
2020-03-06clocksource/drivers/arm_arch_timer: validate arch_timer_rateIonela Voinescu1-3/+15
Using an arch timer with a frequency of less than 1MHz can potentially result in incorrect functionality in systems that assume a reasonable rate of the arch timer of 1 to 50MHz, described as typical in the architecture specification. Therefore, warn if the arch timer rate is below 1MHz, which is considered atypical and worth emphasizing. Suggested-by: Valentin Schneider <valentin.schneider@arm.com> Signed-off-by: Ionela Voinescu <ionela.voinescu@arm.com> Acked-by: Marc Zyngier <maz@kernel.org> Cc: Marc Zyngier <maz@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2020-02-27clocksource: Replace setup_irq() by request_irq()afzal mohammed22-190/+83
request_irq() is preferred over setup_irq(). The early boot setup_irq() invocations happen either via 'init_IRQ()' or 'time_init()', while memory allocators are ready by 'mm_init()'. Per tglx[1], setup_irq() existed in olden days when allocators were not ready by the time early interrupts were initialized. Hence replace setup_irq() by request_irq(). Seldom remove_irq() usage has been observed coupled with setup_irq(), wherever that has been found, it too has been replaced by free_irq(). A build error that was reported by kbuild test robot <lkp@intel.com> in the previous version of the patch also has been fixed. [1] https://lkml.kernel.org/r/alpine.DEB.2.20.1710191609480.1971@nanos Signed-off-by: afzal mohammed <afzal.mohd.ma@gmail.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/91961c77c1cf93d41523f5e1ac52043f32f97077.1582799709.git.afzal.mohd.ma@gmail.com
2020-02-27clocksource/drivers/ingenic: Add support for TCU of X1000周琰杰 (Zhou Yanjie)1-1/+2
X1000 has a different TCU containing OST, since X1000, OST has been independent of TCU. This patch is prepare for later OST driver. Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/1582100974-129559-5-git-send-email-zhouyanjie@wanyeetech.com
2020-02-27clocksource/drivers/timer-ti-dm: Drop bogus omap_dm_timer_of_set_source()Suman Anna1-32/+1
The function omap_dm_timer_of_set_source() was originally added in commit 31a7448f4fa8a ("ARM: OMAP: dmtimer: Add clock source from DT"), and is designed to set a clock source from DT using the clocks property of a timer node. This design choice is okay for clk provider nodes but otherwise is a bad design as typically the clocks property is used to specify the functional clocks for a device, and not its parents. The timer nodes now all define a timer functional clock after the conversion to ti-sysc and the new clkctrl layout, and this results in an attempt to set the same functional clock as its parent when a consumer driver attempts to acquire any of these timers in the omap_dm_timer_prepare() function. This was masked and worked around in commit 983a5a43ec25 ("clocksource: timer-ti-dm: Fix pwm dmtimer usage of fck reparenting"). Fix all of this by simply dropping the entire function. Any DT configuration of clock sources should be achieved using assigned-clocks and assigned-clock-parents properties provided by the Common Clock Framework. Cc: Tony Lindgren <tony@atomide.com> Cc: Tero Kristo <t-kristo@ti.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: H. Nikolaus Schaller <hns@goldelico.com> Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com> Cc: Keerthy <j-keerthy@ti.com> Cc: Ladislav Michl <ladis@linux-mips.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: Sebastian Reichel <sre@kernel.org> Signed-off-by: Suman Anna <s-anna@ti.com> Tested-by: Lokesh Vutla <lokeshvutla@ti.com> Tested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200213053504.22638-1-s-anna@ti.com
2020-02-27clocksource/drivers/timer-ti-dm: Do not update counter on updating the periodLokesh Vutla1-1/+0
Write to trigger register(OMAP_TIMER_TRIGGER_REG) will load the value in Load register(OMAP_TIMER_LOAD_REG) into Counter register (OMAP_TIMER_COUNTER_REG). omap_dm_timer_set_load() writes into trigger register every time load register is updated. When timer is configured in pwm mode, this causes disruption in current pwm cycle, which is not expected especially when pwm is used as PPS signal for synchronized PTP clocks. So do not write into trigger register on updating the period. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Tested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200224050753.17784-3-lokeshvutla@ti.com
2020-02-27clocksource/drivers/owl: Improve owl_timer_init fail messagesMatheus Castello1-4/+11
Check the return from clocksource_mmio_init, add messages in case of an error and in case of not having a defined clock property. Signed-off-by: Matheus Castello <matheus@castello.eng.br> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200219004810.411190-1-matheus@castello.eng.br
2020-02-27clocksource: Add driver for the Ingenic JZ47xx OSTMaarten ter Huurne3-0/+198
OST is the OS Timer, a 64-bit timer/counter with buffered reading. SoCs before the JZ4770 had (if any) a 32-bit OST; the JZ4770 and JZ4780 have a 64-bit OST. This driver will register both a clocksource and a sched_clock to the system. Signed-off-by: Maarten ter Huurne <maarten@treewalker.org> Signed-off-by: Paul Cercueil <paul@crapouillou.net> Tested-by: Mathieu Malaterre <malat@debian.org> Tested-by: Artur Rojek <contact@artur-rojek.eu> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200212180408.30872-1-paul@crapouillou.net
2020-02-26clocksource/drivers/arm_arch_timer: Fix vDSO clockmode when vDSO disabledVincenzo Frascino1-0/+4
The arm_arch_timer requires VDSO_CLOCKMODE_ARCHTIMER to be defined to compile correctly. On ARM the vDSO can be disabled and when this is the case the compilation ends prematurely with an error: $ make ARCH=arm multi_v7_defconfig $ ./scripts/config -d VDSO $ make drivers/clocksource/arm_arch_timer.c:73:44: error: ‘VDSO_CLOCKMODE_ARCHTIMER’ undeclared here (not in a function) static enum vdso_clock_mode vdso_default = VDSO_CLOCKMODE_ARCHTIMER; Make the usage of VDSO_CLOCKMODE_ARCHTIMER depend on the VDSO enablement and initialize the vdso clockmode variable with VDSO_CLOCKMODE_NONE otherwise. [ tglx: Match changelog and patch content. ] Fixes: 5e3c6a312a09 ("ARM/arm64: vdso: Use common vdso clock mode storage") Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20200224151552.57274-1-vincenzo.frascino@arm.com
2020-02-21clocksource/drivers/fttmr010: Set interrupt and shutdownJoel Stanley1-5/+46
In preparation for supporting the ast2600, pass the shutdown and interrupt functions to the common init callback. Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20191107094218.13210-3-joel@jms.id.au
2020-02-21clocksource/drivers/fttmr010: Parametrise shutdownJoel Stanley1-11/+8
In preparation for supporting the ast2600 which uses a different method to clear bits in the control register, use a callback for performing the shutdown sequence. Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20191107094218.13210-2-joel@jms.id.au
2020-02-17ARM/arm64: vdso: Use common vdso clock mode storageThomas Gleixner1-4/+4
Convert ARM/ARM64 to the generic VDSO clock mode storage. This needs to happen in one go as they share the clocksource driver. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Link: https://lkml.kernel.org/r/20200207124403.363235229@linutronix.de
2020-02-17mips: vdso: Use generic VDSO clock mode storageThomas Gleixner1-4/+4
Switch to the generic VDSO clock mode storage. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Link: https://lkml.kernel.org/r/20200207124403.244684017@linutronix.de
2020-02-17x86/vdso: Move VDSO clocksource state tracking to callbackThomas Gleixner1-0/+7
All architectures which use the generic VDSO code have their own storage for the VDSO clock mode. That's pointless and just requires duplicate code. X86 abuses the function which retrieves the architecture specific clock mode storage to mark the clocksource as used in the VDSO. That's silly because this is invoked on every tick when the VDSO data is updated. Move this functionality to the clocksource::enable() callback so it gets invoked once when the clocksource is installed. This allows to make the clock mode storage generic. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Michael Kelley <mikelley@microsoft.com> (Hyper-V parts) Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com> (VDSO parts) Acked-by: Juergen Gross <jgross@suse.com> (Xen parts) Link: https://lkml.kernel.org/r/20200207124402.934519777@linutronix.de
2020-02-09Merge tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds1-4/+4
Pull ARM SoC late updates from Olof Johansson: "This is some material that we picked up into our tree late, or that had more complex dependencies on more than one topic branch that makes sense to keep separately. - TI support for secure accelerators and hwrng on OMAP4/5 - TI camera changes for dra7 and am437x and SGX improvement due to better reset control support on am335x, am437x and dra7 - Davinci moves to proper clocksource on DM365, and regulator/audio improvements for DM365 and DM644x eval boards" * tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (32 commits) ARM: dts: omap4-droid4: Enable hdq for droid4 ds250x 1-wire battery nvmem ARM: dts: motorola-cpcap-mapphone: Configure calibration interrupt ARM: dts: Configure interconnect target module for am437x sgx ARM: dts: Configure sgx for dra7 ARM: dts: Configure rstctrl reset for am335x SGX ARM: dts: dra7: Add ti-sysc node for VPE ARM: dts: dra7: add vpe clkctrl node ARM: dts: am43x-epos-evm: Add VPFE and OV2659 entries ARM: dts: am437x-sk-evm: Add VPFE and OV2659 entries ARM: dts: am43xx: add support for clkout1 clock arm: dts: dra76-evm: Add CAL and OV5640 nodes arm: dtsi: dra76x: Add CAL dtsi node arm: dts: dra72-evm-common: Add entries for the CSI2 cameras ARM: dts: DRA72: Add CAL dtsi node ARM: dts: dra7-l4: Add ti-sysc node for CAM ARM: OMAP: DRA7xx: Make CAM clock domain SWSUP only ARM: dts: dra7: add cam clkctrl node ARM: OMAP2+: Drop legacy platform data for omap4 des ARM: OMAP2+: Drop legacy platform data for omap4 sham ARM: OMAP2+: Drop legacy platform data for omap4 aes ...
2020-01-28Merge tag 'timers-core-2020-01-27' of ↵Linus Torvalds9-82/+590
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer updates from Thomas Gleixner: "The timekeeping and timers departement provides: - Time namespace support: If a container migrates from one host to another then it expects that clocks based on MONOTONIC and BOOTTIME are not subject to disruption. Due to different boot time and non-suspended runtime these clocks can differ significantly on two hosts, in the worst case time goes backwards which is a violation of the POSIX requirements. The time namespace addresses this problem. It allows to set offsets for clock MONOTONIC and BOOTTIME once after creation and before tasks are associated with the namespace. These offsets are taken into account by timers and timekeeping including the VDSO. Offsets for wall clock based clocks (REALTIME/TAI) are not provided by this mechanism. While in theory possible, the overhead and code complexity would be immense and not justified by the esoteric potential use cases which were discussed at Plumbers '18. The overhead for tasks in the root namespace (ie where host time offsets = 0) is in the noise and great effort was made to ensure that especially in the VDSO. If time namespace is disabled in the kernel configuration the code is compiled out. Kudos to Andrei Vagin and Dmitry Sofanov who implemented this feature and kept on for more than a year addressing review comments, finding better solutions. A pleasant experience. - Overhaul of the alarmtimer device dependency handling to ensure that the init/suspend/resume ordering is correct. - A new clocksource/event driver for Microchip PIT64 - Suspend/resume support for the Hyper-V clocksource - The usual pile of fixes, updates and improvements mostly in the driver code" * tag 'timers-core-2020-01-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (71 commits) alarmtimer: Make alarmtimer_get_rtcdev() a stub when CONFIG_RTC_CLASS=n alarmtimer: Use wakeup source from alarmtimer platform device alarmtimer: Make alarmtimer platform device child of RTC device alarmtimer: Update alarmtimer_get_rtcdev() docs to reflect reality hrtimer: Add missing sparse annotation for __run_timer() lib/vdso: Only read hrtimer_res when needed in __cvdso_clock_getres() MIPS: vdso: Define BUILD_VDSO32 when building a 32bit kernel clocksource/drivers/hyper-v: Set TSC clocksource as default w/ InvariantTSC clocksource/drivers/hyper-v: Untangle stimers and timesync from clocksources clocksource/drivers/timer-microchip-pit64b: Fix sparse warning clocksource/drivers/exynos_mct: Rename Exynos to lowercase clocksource/drivers/timer-ti-dm: Fix uninitialized pointer access clocksource/drivers/timer-ti-dm: Switch to platform_get_irq clocksource/drivers/timer-ti-dm: Convert to devm_platform_ioremap_resource clocksource/drivers/em_sti: Fix variable declaration in em_sti_probe clocksource/drivers/em_sti: Convert to devm_platform_ioremap_resource clocksource/drivers/bcm2835_timer: Fix memory leak of timer clocksource/drivers/cadence-ttc: Use ttc driver as platform driver clocksource/drivers/timer-microchip-pit64b: Add Microchip PIT64B support clocksource/drivers/hyper-v: Reserve PAGE_SIZE space for tsc page ...
2020-01-16clocksource/drivers/hyper-v: Set TSC clocksource as default w/ InvariantTSCAndrea Parri1-2/+10
Change the Hyper-V clocksource ratings to 250, below the TSC clocksource rating of 300. In configurations where Hyper-V offers an InvariantTSC, the TSC is not marked "unstable", so the TSC clocksource is available and preferred. With the higher rating, it will be the default. On older hardware and Hyper-V versions, the TSC is marked "unstable", so no TSC clocksource is created and the selected Hyper-V clocksource will be the default. Signed-off-by: Andrea Parri <parri.andrea@gmail.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200109160650.16150-3-parri.andrea@gmail.com
generated by cgit v1.2.3 (git 2.39.0) at 2025-01-28 07:14:55 +0300